/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
 * Copyright by The HDF Group.                                               *
 * Copyright by the Board of Trustees of the University of Illinois.         *
 * All rights reserved.                                                      *
 *                                                                           *
 * This file is part of HDF5.  The full HDF5 copyright notice, including     *
 * terms governing use, modification, and redistribution, is contained in    *
 * the COPYING file, which can be found at the root of the source code       *
 * distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases.  *
 * If you do not have access to either file, you may request a copy from     *
 * help@hdfgroup.org.                                                        *
 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */

/*-------------------------------------------------------------------------
 *
 * Created:             H5Faccum.c
 *                      Jan 10 2008
 *                      Quincey Koziol <koziol@hdfgroup.org>
 *
 * Purpose:             File metadata "accumulator" routines.  (Used to
 *                      cache small metadata I/Os and group them into a
 *                      single larger I/O)
 *
 *-------------------------------------------------------------------------
 */

/****************/
/* Module Setup */
/****************/

#define H5F_PACKAGE		/*suppress error about including H5Fpkg	  */


/***********/
/* Headers */
/***********/
#include "H5private.h"		/* Generic Functions			*/
#include "H5Eprivate.h"		/* Error handling		  	*/
#include "H5Fpkg.h"             /* File access				*/
#include "H5FDprivate.h"	/* File drivers				*/
#include "H5VMprivate.h"	/* Vectors and arrays 			*/


/****************/
/* Local Macros */
/****************/

/* Metadata accumulator controls */
#define H5F_ACCUM_THROTTLE      8
#define H5F_ACCUM_THRESHOLD     2048
#define H5F_ACCUM_MAX_SIZE      (1024 *1024) /* Max. accum. buf size (max. I/Os will be 1/2 this size) */


/******************/
/* Local Typedefs */
/******************/

/* Enumerated type to indicate how data will be added to accumulator */
typedef enum {
    H5F_ACCUM_PREPEND,          /* Data will be prepended to accumulator */
    H5F_ACCUM_APPEND            /* Data will be appended to accumulator */
} H5F_accum_adjust_t;


/********************/
/* Package Typedefs */
/********************/


/********************/
/* Local Prototypes */
/********************/


/*********************/
/* Package Variables */
/*********************/


/*****************************/
/* Library Private Variables */
/*****************************/


/*******************/
/* Local Variables */
/*******************/

/* Declare a PQ free list to manage the metadata accumulator buffer */
H5FL_BLK_DEFINE_STATIC(meta_accum);



/*-------------------------------------------------------------------------
 * Function:	H5F__accum_read
 *
 * Purpose:	Attempts to read some data from the metadata accumulator for
 *              a file into a buffer.
 *
 * Note:	We can't change (or add to) the metadata accumulator, because
 *		this might be a speculative read and could possibly read raw
 *		data into the metadata accumulator.
 *
 * Return:	Non-negative on success/Negative on failure
 *
 * Programmer:	Quincey Koziol
 *		koziol@hdfgroup.org
 *		Jan 10 2008
 *
 *-------------------------------------------------------------------------
 */
herr_t
H5F__accum_read(const H5F_io_info_t *fio_info, H5FD_mem_t type, haddr_t addr,
    size_t size, void *buf/*out*/)
{
    H5FD_mem_t  map_type;               /* Mapped memory type */
    herr_t      ret_value = SUCCEED;    /* Return value */

    FUNC_ENTER_PACKAGE

    HDassert(fio_info);
    HDassert(fio_info->f);
    HDassert(fio_info->dxpl);
    HDassert(buf);

    /* Treat global heap as raw data */
    map_type = (type == H5FD_MEM_GHEAP) ? H5FD_MEM_DRAW : type;

    /* Check if this information is in the metadata accumulator */
    if((fio_info->f->shared->feature_flags & H5FD_FEAT_ACCUMULATE_METADATA) && map_type != H5FD_MEM_DRAW) {
        H5F_meta_accum_t *accum;     /* Alias for file's metadata accumulator */

        /* Set up alias for file's metadata accumulator info */
        accum = &fio_info->f->shared->accum;

        if(size < H5F_ACCUM_MAX_SIZE) {
            /* Sanity check */
            HDassert(!accum->buf || (accum->alloc_size >= accum->size));

            /* Current read adjoins or overlaps with metadata accumulator */
            if(H5F_addr_overlap(addr, size, accum->loc, accum->size)
                    || ((addr + size) == accum->loc)
                    || (accum->loc + accum->size) == addr) {
                size_t amount_before;       /* Amount to read before current accumulator */
                haddr_t new_addr;           /* New address of the accumulator buffer */
                size_t new_size;            /* New size of the accumulator buffer */

                /* Compute new values for accumulator */
                new_addr = MIN(addr, accum->loc);
                new_size = (size_t)(MAX((addr + size), (accum->loc + accum->size)) - new_addr);

                /* Check if we need more buffer space */
                if(new_size > accum->alloc_size) {
                    size_t new_alloc_size;        /* New size of accumulator */

                    /* Adjust the buffer size to be a power of 2 that is large enough to hold data */
                    new_alloc_size = (size_t)1 << (1 + H5VM_log2_gen((uint64_t)(new_size - 1)));

                    /* Reallocate the metadata accumulator buffer */
                    if(NULL == (accum->buf = H5FL_BLK_REALLOC(meta_accum, accum->buf, new_alloc_size)))
                        HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, FAIL, "unable to allocate metadata accumulator buffer")

                    /* Note the new buffer size */
                    accum->alloc_size = new_alloc_size;
#ifdef H5_CLEAR_MEMORY
    HDmemset(accum->buf + accum->size, 0, (accum->alloc_size - accum->size));
#endif /* H5_CLEAR_MEMORY */
                } /* end if */

                /* Read the part before the metadata accumulator */
                if(addr < accum->loc) {
                    /* Set the amount to read */
                    H5_CHECKED_ASSIGN(amount_before, size_t, (accum->loc - addr), hsize_t);

                    /* Make room for the metadata to read in */
                    HDmemmove(accum->buf + amount_before, accum->buf, accum->size);

                    /* Adjust dirty region tracking info, if present */
                    if(accum->dirty)
                        accum->dirty_off += amount_before;

                    /* Dispatch to driver */
                    if(H5FD_read(fio_info->f->shared->lf, fio_info->dxpl, map_type, addr, amount_before, accum->buf) < 0)
                        HGOTO_ERROR(H5E_IO, H5E_READERROR, FAIL, "driver read request failed")
                } /* end if */
                else
                    amount_before = 0;

                /* Read the part after the metadata accumulator */
                if((addr + size) > (accum->loc + accum->size)) {
                    size_t amount_after;         /* Amount to read at a time */

                    /* Set the amount to read */
                    H5_CHECKED_ASSIGN(amount_after, size_t, ((addr + size) - (accum->loc + accum->size)), hsize_t);

                    /* Dispatch to driver */
                    if(H5FD_read(fio_info->f->shared->lf, fio_info->dxpl, map_type, (accum->loc + accum->size), amount_after, (accum->buf + accum->size + amount_before)) < 0)
                        HGOTO_ERROR(H5E_IO, H5E_READERROR, FAIL, "driver read request failed")
                } /* end if */

                /* Copy the data out of the buffer */
                HDmemcpy(buf, accum->buf + (addr - new_addr), size);

                /* Adjust the accumulator address & size */
                accum->loc = new_addr;
                accum->size = new_size;
            } /* end if */
            /* Current read doesn't overlap with metadata accumulator, read it from file */
            else {
                /* Dispatch to driver */
                if(H5FD_read(fio_info->f->shared->lf, fio_info->dxpl, map_type, addr, size, buf) < 0)
                    HGOTO_ERROR(H5E_IO, H5E_READERROR, FAIL, "driver read request failed")
            } /* end else */
        } /* end if */
        else {
            /* Read the data */
            if(H5FD_read(fio_info->f->shared->lf, fio_info->dxpl, map_type, addr, size, buf) < 0)
                HGOTO_ERROR(H5E_IO, H5E_READERROR, FAIL, "driver read request failed")

            /* Check for overlap w/dirty accumulator */
            /* (Note that this could be improved by updating the non-dirty
             *  information in the accumulator with [some of] the information
             *  just read in. -QAK)
             */
            if(accum->dirty &&
                    H5F_addr_overlap(addr, size, accum->loc + accum->dirty_off, accum->dirty_len)) {
                haddr_t dirty_loc = accum->loc + accum->dirty_off;  /* File offset of dirty information */
                size_t buf_off;         /* Offset of dirty region in buffer */
                size_t dirty_off;       /* Offset within dirty region */
                size_t overlap_size;    /* Size of overlap with dirty region */

                /* Check for read starting before beginning dirty region */
                if(H5F_addr_le(addr, dirty_loc)) {
                    /* Compute offset of dirty region within buffer */
                    buf_off = (size_t)(dirty_loc - addr);

                    /* Compute offset within dirty region */
                    dirty_off = 0;

                    /* Check for read ending within dirty region */
                    if(H5F_addr_lt(addr + size, dirty_loc + accum->dirty_len))
                        overlap_size = (size_t)((addr + size) - buf_off);
                    else        /* Access covers whole dirty region */
                        overlap_size = accum->dirty_len;
                } /* end if */
                else { /* Read starts after beginning of dirty region */
                    /* Compute dirty offset within buffer and overlap size */
                    buf_off = 0;
                    dirty_off = (size_t)(addr - dirty_loc);
                    overlap_size = (size_t)((dirty_loc + accum->dirty_len) - addr);
                } /* end else */

                /* Copy the dirty region to buffer */
                HDmemcpy((unsigned char *)buf + buf_off, (unsigned char *)accum->buf + accum->dirty_off + dirty_off, overlap_size);
            } /* end if */
        } /* end else */
    } /* end if */
    else {
        /* Read the data */
        if(H5FD_read(fio_info->f->shared->lf, fio_info->dxpl, map_type, addr, size, buf) < 0)
            HGOTO_ERROR(H5E_IO, H5E_READERROR, FAIL, "driver read request failed")
    } /* end else */

done:
    FUNC_LEAVE_NOAPI(ret_value)
} /* end H5F__accum_read() */


/*-------------------------------------------------------------------------
 * Function:	H5F__accum_adjust
 *
 * Purpose:	Adjust accumulator size, if necessary
 *
 * Return:	Non-negative on success/Negative on failure
 *
 * Programmer:	Quincey Koziol
 *		koziol@hdfgroup.org
 *		Jun 11 2009
 *
 *-------------------------------------------------------------------------
 */
static herr_t
H5F__accum_adjust(H5F_meta_accum_t *accum, const H5F_io_info_t *fio_info,
    H5F_accum_adjust_t adjust, size_t size)
{
    herr_t      ret_value = SUCCEED;    /* Return value */

    FUNC_ENTER_STATIC

    HDassert(accum);
    HDassert(fio_info);
    HDassert(H5F_ACCUM_APPEND == adjust || H5F_ACCUM_PREPEND == adjust);
    HDassert(size > 0);
    HDassert(size <= H5F_ACCUM_MAX_SIZE);

    /* Check if we need more buffer space */
    if((size + accum->size) > accum->alloc_size) {
        size_t new_size;        /* New size of accumulator */

        /* Adjust the buffer size to be a power of 2 that is large enough to hold data */
        new_size = (size_t)1 << (1 + H5VM_log2_gen((uint64_t)((size + accum->size) - 1)));

        /* Check for accumulator getting too big */
        if(new_size > H5F_ACCUM_MAX_SIZE) {
            size_t shrink_size;     /* Amount to shrink accumulator by */
            size_t remnant_size;    /* Amount left in accumulator */

            /* Cap the accumulator's growth, leaving some room */

            /* Determine the amounts to work with */
            if(size > (H5F_ACCUM_MAX_SIZE / 2)) {
                new_size = H5F_ACCUM_MAX_SIZE;
                shrink_size = accum->size;
                remnant_size = 0;
            } /* end if */
            else {
                if(H5F_ACCUM_PREPEND == adjust) {
                    new_size = (H5F_ACCUM_MAX_SIZE / 2);
                    shrink_size = (H5F_ACCUM_MAX_SIZE / 2);
                    remnant_size = accum->size - shrink_size;
                } /* end if */
                else {
                    size_t adjust_size = size + accum->dirty_len;

                    /* Check if we can slide the dirty region down, to accommodate the request */
                    if(accum->dirty && (adjust_size <= H5F_ACCUM_MAX_SIZE)) {
                        if((ssize_t)(H5F_ACCUM_MAX_SIZE - (accum->dirty_off + adjust_size)) >= (ssize_t)(2 * size))
                            shrink_size = accum->dirty_off / 2;
                        else
                            shrink_size = accum->dirty_off;
                        remnant_size = accum->size - shrink_size;
                        new_size = remnant_size + size;
                    } /* end if */
                    else {
                        new_size = (H5F_ACCUM_MAX_SIZE / 2);
                        shrink_size = (H5F_ACCUM_MAX_SIZE / 2);
                        remnant_size = accum->size - shrink_size;
                    } /* end else */
                } /* end else */
            } /* end else */

            /* Check if we need to flush accumulator data to file */
            if(accum->dirty) {
                /* Check whether to accumulator will be prepended or appended */
                if(H5F_ACCUM_PREPEND == adjust) {
                    /* Check if the dirty region overlaps the region to eliminate from the accumulator */
                    if((accum->size - shrink_size) < (accum->dirty_off + accum->dirty_len)) {
                        /* Write out the dirty region from the metadata accumulator, with dispatch to driver */
                        if(H5FD_write(fio_info->f->shared->lf, fio_info->dxpl, H5FD_MEM_DEFAULT, (accum->loc + accum->dirty_off), accum->dirty_len, (accum->buf + accum->dirty_off)) < 0)
                            HGOTO_ERROR(H5E_FILE, H5E_WRITEERROR, FAIL, "file write failed")

                        /* Reset accumulator dirty flag */
                        accum->dirty = FALSE;
                    } /* end if */
                } /* end if */
                else {
                    /* Check if the dirty region overlaps the region to eliminate from the accumulator */
                    if(shrink_size > accum->dirty_off) {
                        /* Write out the dirty region from the metadata accumulator, with dispatch to driver */
                        if(H5FD_write(fio_info->f->shared->lf, fio_info->dxpl, H5FD_MEM_DEFAULT, (accum->loc + accum->dirty_off), accum->dirty_len, (accum->buf + accum->dirty_off)) < 0)
                            HGOTO_ERROR(H5E_FILE, H5E_WRITEERROR, FAIL, "file write failed")

                        /* Reset accumulator dirty flag */
                        accum->dirty = FALSE;
                    } /* end if */

                    /* Adjust dirty region tracking info */
                    accum->dirty_off -= shrink_size;
                } /* end else */
            } /* end if */

            /* Trim the accumulator's use of its buffer */
            accum->size = remnant_size;

            /* When appending, need to adjust location of accumulator */
            if (H5F_ACCUM_APPEND == adjust) {
                /* Move remnant of accumulator down */
                HDmemmove(accum->buf, (accum->buf + shrink_size), remnant_size);

                /* Adjust accumulator's location */
                accum->loc += shrink_size;
            } /* end if */
        } /* end if */

        /* Check for accumulator needing to be reallocated */
        if(new_size > accum->alloc_size) {
            unsigned char      *new_buf;            /* New buffer to hold the accumulated metadata */

            /* Reallocate the metadata accumulator buffer */
            if(NULL == (new_buf = H5FL_BLK_REALLOC(meta_accum, accum->buf, new_size)))
                HGOTO_ERROR(H5E_FILE, H5E_CANTALLOC, FAIL, "unable to allocate metadata accumulator buffer")

            /* Update accumulator info */
            accum->buf = new_buf;
            accum->alloc_size = new_size;
#ifdef H5_CLEAR_MEMORY
HDmemset(accum->buf + accum->size, 0, (accum->alloc_size - (accum->size + size)));
#endif /* H5_CLEAR_MEMORY */
        } /* end if */
    } /* end if */

done:
    FUNC_LEAVE_NOAPI(ret_value)
} /* end H5F__accum_adjust() */


/*-------------------------------------------------------------------------
 * Function:	H5F__accum_write
 *
 * Purpose:	Attempts to write some data to the metadata accumulator for
 *              a file from a buffer.
 *
 * Return:	Non-negative on success/Negative on failure
 *
 * Programmer:	Quincey Koziol
 *		koziol@hdfgroup.org
 *		Jan 10 2008
 *
 *-------------------------------------------------------------------------
 */
herr_t
H5F__accum_write(const H5F_io_info_t *fio_info, H5FD_mem_t type, haddr_t addr,
    size_t size, const void *buf)
{
    H5FD_mem_t  map_type;               /* Mapped memory type */
    herr_t      ret_value = SUCCEED;    /* Return value */

    FUNC_ENTER_NOAPI(FAIL)

    HDassert(fio_info);
    HDassert(fio_info->f);
    HDassert(H5F_INTENT(fio_info->f) & H5F_ACC_RDWR);
    HDassert(fio_info->dxpl);
    HDassert(buf);

    /* Treat global heap as raw data */
    map_type = (type == H5FD_MEM_GHEAP) ? H5FD_MEM_DRAW : type;

    /* Check for accumulating metadata */
    if((fio_info->f->shared->feature_flags & H5FD_FEAT_ACCUMULATE_METADATA) && map_type != H5FD_MEM_DRAW) {
        H5F_meta_accum_t *accum;     /* Alias for file's metadata accumulator */

        /* Set up alias for file's metadata accumulator info */
        accum = &fio_info->f->shared->accum;

        if(size < H5F_ACCUM_MAX_SIZE) {
            /* Sanity check */
            HDassert(!accum->buf || (accum->alloc_size >= accum->size));

            /* Check if there is already metadata in the accumulator */
            if(accum->size > 0) {
                /* Check if the new metadata adjoins the beginning of the current accumulator */
                if((addr + size) == accum->loc) {
                    /* Check if we need to adjust accumulator size */
                    if(H5F__accum_adjust(accum, fio_info, H5F_ACCUM_PREPEND, size) < 0)
                        HGOTO_ERROR(H5E_IO, H5E_CANTRESIZE, FAIL, "can't adjust metadata accumulator")

                    /* Move the existing metadata to the proper location */
                    HDmemmove(accum->buf + size, accum->buf, accum->size);

                    /* Copy the new metadata at the front */
                    HDmemcpy(accum->buf, buf, size);

                    /* Set the new size & location of the metadata accumulator */
                    accum->loc = addr;
                    accum->size += size;

                    /* Adjust the dirty region and mark accumulator dirty */
                    if(accum->dirty)
                        accum->dirty_len = size + accum->dirty_off + accum->dirty_len;
                    else {
                        accum->dirty_len = size;
                        accum->dirty = TRUE;
                    } /* end else */
                    accum->dirty_off = 0;
                } /* end if */
                /* Check if the new metadata adjoins the end of the current accumulator */
                else if(addr == (accum->loc + accum->size)) {
                    /* Check if we need to adjust accumulator size */
                    if(H5F__accum_adjust(accum, fio_info, H5F_ACCUM_APPEND, size) < 0)
                        HGOTO_ERROR(H5E_IO, H5E_CANTRESIZE, FAIL, "can't adjust metadata accumulator")

                    /* Copy the new metadata to the end */
                    HDmemcpy(accum->buf + accum->size, buf, size);

                    /* Adjust the dirty region and mark accumulator dirty */
                    if(accum->dirty)
                        accum->dirty_len = size + (accum->size - accum->dirty_off);
                    else {
                        accum->dirty_off = accum->size;
                        accum->dirty_len = size;
                        accum->dirty = TRUE;
                    } /* end else */

                    /* Set the new size of the metadata accumulator */
                    accum->size += size;
                } /* end if */
                /* Check if the piece of metadata being written overlaps the metadata accumulator */
                else if(H5F_addr_overlap(addr, size, accum->loc, accum->size)) {
                    size_t add_size;    /* New size of the accumulator buffer */

                    /* Check if the new metadata is entirely within the current accumulator */
                    if(addr >= accum->loc && (addr + size) <= (accum->loc + accum->size)) {
                        size_t dirty_off = (size_t)(addr - accum->loc);

                        /* Copy the new metadata to the proper location within the accumulator */
                        HDmemcpy(accum->buf + dirty_off, buf, size);

                        /* Adjust the dirty region and mark accumulator dirty */
                        if(accum->dirty) {
                            /* Check for new metadata starting before current dirty region */
                            if(dirty_off <= accum->dirty_off) {
                                if((dirty_off + size) <= (accum->dirty_off + accum->dirty_len))
                                    accum->dirty_len = (accum->dirty_off + accum->dirty_len) - dirty_off;
                                else
                                    accum->dirty_len = size;
                                accum->dirty_off = dirty_off;
                            } /* end if */
                            else {
                                if((dirty_off + size) <= (accum->dirty_off + accum->dirty_len))
                                    ; /* accum->dirty_len doesn't change */
                                else
                                    accum->dirty_len = (dirty_off + size) - accum->dirty_off;
                            } /* end else */
                        } /* end if */
                        else {
                            accum->dirty_off = dirty_off;
                            accum->dirty_len = size;
                            accum->dirty = TRUE;
                        } /* end else */
                    } /* end if */
                    /* Check if the new metadata overlaps the beginning of the current accumulator */
                    else if(addr < accum->loc && (addr + size) <= (accum->loc + accum->size)) {
                        size_t old_offset;  /* Offset of old data within the accumulator buffer */

                        /* Calculate the amount we will need to add to the accumulator size, based on the amount of overlap */
                        H5_CHECKED_ASSIGN(add_size, size_t, (accum->loc - addr), hsize_t);

                        /* Check if we need to adjust accumulator size */
                        if(H5F__accum_adjust(accum, fio_info, H5F_ACCUM_PREPEND, add_size) < 0)
                            HGOTO_ERROR(H5E_IO, H5E_CANTRESIZE, FAIL, "can't adjust metadata accumulator")

                        /* Calculate the proper offset of the existing metadata */
                        H5_CHECKED_ASSIGN(old_offset, size_t, (addr + size) - accum->loc, hsize_t);

                        /* Move the existing metadata to the proper location */
                        HDmemmove(accum->buf + size, accum->buf + old_offset, (accum->size - old_offset));

                        /* Copy the new metadata at the front */
                        HDmemcpy(accum->buf, buf, size);

                        /* Set the new size & location of the metadata accumulator */
                        accum->loc = addr;
                        accum->size += add_size;

                        /* Adjust the dirty region and mark accumulator dirty */
                        if(accum->dirty) {
                            size_t curr_dirty_end = add_size + accum->dirty_off + accum->dirty_len;

                            accum->dirty_off = 0;
                            if(size <= curr_dirty_end)
                                accum->dirty_len = curr_dirty_end;
                            else
                                accum->dirty_len = size;
                        } /* end if */
                        else {
                            accum->dirty_off = 0;
                            accum->dirty_len = size;
                            accum->dirty = TRUE;
                        } /* end else */
                    } /* end if */
                    /* Check if the new metadata overlaps the end of the current accumulator */
                    else if(addr >= accum->loc && (addr + size) > (accum->loc + accum->size)) {
                        size_t dirty_off;           /* Offset of dirty region */

                        /* Calculate the amount we will need to add to the accumulator size, based on the amount of overlap */
                        H5_CHECKED_ASSIGN(add_size, size_t, (addr + size) - (accum->loc + accum->size), hsize_t);

                        /* Check if we need to adjust accumulator size */
                        if(H5F__accum_adjust(accum, fio_info, H5F_ACCUM_APPEND, add_size) < 0)
                            HGOTO_ERROR(H5E_IO, H5E_CANTRESIZE, FAIL, "can't adjust metadata accumulator")

                        /* Compute offset of dirty region (after adjusting accumulator) */
                        dirty_off = (size_t)(addr - accum->loc);

                        /* Copy the new metadata to the end */
                        HDmemcpy(accum->buf + dirty_off, buf, size);

                        /* Set the new size of the metadata accumulator */
                        accum->size += add_size;

                        /* Adjust the dirty region and mark accumulator dirty */
                        if(accum->dirty) {
                            /* Check for new metadata starting before current dirty region */
                            if(dirty_off <= accum->dirty_off) {
                                accum->dirty_off = dirty_off;
                                accum->dirty_len = size;
                            } /* end if */
                            else {
                                accum->dirty_len = (dirty_off + size) - accum->dirty_off;
                            } /* end else */
                        } /* end if */
                        else {
                            accum->dirty_off = dirty_off;
                            accum->dirty_len = size;
                            accum->dirty = TRUE;
                        } /* end else */
                    } /* end if */
                    /* New metadata overlaps both ends of the current accumulator */
                    else {
                        /* Check if we need more buffer space */
                        if(size > accum->alloc_size) {
                            size_t new_alloc_size;        /* New size of accumulator */

                            /* Adjust the buffer size to be a power of 2 that is large enough to hold data */
                            new_alloc_size = (size_t)1 << (1 + H5VM_log2_gen((uint64_t)(size - 1)));

                            /* Reallocate the metadata accumulator buffer */
                            if(NULL == (accum->buf = H5FL_BLK_REALLOC(meta_accum, accum->buf, new_alloc_size)))
                                HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, FAIL, "unable to allocate metadata accumulator buffer")

                            /* Note the new buffer size */
                            accum->alloc_size = new_alloc_size;
#ifdef H5_CLEAR_MEMORY
HDmemset(accum->buf + size, 0, (accum->alloc_size - size));
#endif /* H5_CLEAR_MEMORY */
                        } /* end if */

                        /* Copy the new metadata to the buffer */
                        HDmemcpy(accum->buf, buf, size);

                        /* Set the new size & location of the metadata accumulator */
                        accum->loc = addr;
                        accum->size = size;

                        /* Adjust the dirty region and mark accumulator dirty */
                        accum->dirty_off = 0;
                        accum->dirty_len = size;
                        accum->dirty = TRUE;
                    } /* end else */
                } /* end if */
                /* New piece of metadata doesn't adjoin or overlap the existing accumulator */
                else {
                    /* Write out the existing metadata accumulator, with dispatch to driver */
                    if(accum->dirty) {
                        if(H5FD_write(fio_info->f->shared->lf, fio_info->dxpl, H5FD_MEM_DEFAULT, accum->loc + accum->dirty_off, accum->dirty_len, accum->buf + accum->dirty_off) < 0)
                            HGOTO_ERROR(H5E_IO, H5E_WRITEERROR, FAIL, "file write failed")

                        /* Reset accumulator dirty flag */
                        accum->dirty = FALSE;
                    } /* end if */

                    /* Cache the new piece of metadata */
                    /* Check if we need to resize the buffer */
                    if(size > accum->alloc_size) {
                        size_t new_size;        /* New size of accumulator */

                        /* Adjust the buffer size to be a power of 2 that is large enough to hold data */
                        new_size = (size_t)1 << (1 + H5VM_log2_gen((uint64_t)(size - 1)));

                        /* Grow the metadata accumulator buffer */
                        if(NULL == (accum->buf = H5FL_BLK_REALLOC(meta_accum, accum->buf, new_size)))
                            HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, FAIL, "unable to allocate metadata accumulator buffer")

                        /* Note the new buffer size */
                        accum->alloc_size = new_size;
#ifdef H5_CLEAR_MEMORY
{
size_t clear_size = MAX(accum->size, size);
HDmemset(accum->buf + clear_size, 0, (accum->alloc_size - clear_size));
}
#endif /* H5_CLEAR_MEMORY */
                    } /* end if */
                    else {
                        /* Check if we should shrink the accumulator buffer */
                        if(size < (accum->alloc_size / H5F_ACCUM_THROTTLE) &&
                                accum->alloc_size > H5F_ACCUM_THRESHOLD) {
                            size_t tmp_size = (accum->alloc_size / H5F_ACCUM_THROTTLE); /* New size of accumulator buffer */

                            /* Shrink the accumulator buffer */
                            if(NULL == (accum->buf = H5FL_BLK_REALLOC(meta_accum, accum->buf, tmp_size)))
                                HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, FAIL, "unable to allocate metadata accumulator buffer")

                            /* Note the new buffer size */
                            accum->alloc_size = tmp_size;
                        } /* end if */
                    } /* end else */

                    /* Update the metadata accumulator information */
                    accum->loc = addr;
                    accum->size = size;

                    /* Store the piece of metadata in the accumulator */
                    HDmemcpy(accum->buf, buf, size);

                    /* Adjust the dirty region and mark accumulator dirty */
                    accum->dirty_off = 0;
                    accum->dirty_len = size;
                    accum->dirty = TRUE;
                } /* end else */
            } /* end if */
            /* No metadata in the accumulator, grab this piece and keep it */
            else {
                /* Check if we need to reallocate the buffer */
                if(size > accum->alloc_size) {
                    size_t new_size;        /* New size of accumulator */

                    /* Adjust the buffer size to be a power of 2 that is large enough to hold data */
                    new_size = (size_t)1 << (1 + H5VM_log2_gen((uint64_t)(size - 1)));

                    /* Reallocate the metadata accumulator buffer */
                    if(NULL == (accum->buf = H5FL_BLK_REALLOC(meta_accum, accum->buf, new_size)))
                        HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, FAIL, "unable to allocate metadata accumulator buffer")

                    /* Note the new buffer size */
                    accum->alloc_size = new_size;
#ifdef H5_CLEAR_MEMORY
HDmemset(accum->buf + size, 0, (accum->alloc_size - size));
#endif /* H5_CLEAR_MEMORY */
                } /* end if */

                /* Update the metadata accumulator information */
                accum->loc = addr;
                accum->size = size;

                /* Store the piece of metadata in the accumulator */
                HDmemcpy(accum->buf, buf, size);

                /* Adjust the dirty region and mark accumulator dirty */
                accum->dirty_off = 0;
                accum->dirty_len = size;
                accum->dirty = TRUE;
            } /* end else */
        } /* end if */
        else {
            /* Write the data */
            if(H5FD_write(fio_info->f->shared->lf, fio_info->dxpl, map_type, addr, size, buf) < 0)
                HGOTO_ERROR(H5E_IO, H5E_WRITEERROR, FAIL, "file write failed")

            /* Check for overlap w/accumulator */
            /* (Note that this could be improved by updating the accumulator
             *  with [some of] the information just read in. -QAK)
             */
            if(H5F_addr_overlap(addr, size, accum->loc, accum->size)) {
                /* Check for write starting before beginning of accumulator */
                if(H5F_addr_le(addr, accum->loc)) {
                    /* Check for write ending within accumulator */
                    if(H5F_addr_le(addr + size, accum->loc + accum->size)) {
                        size_t overlap_size;    /* Size of overlapping region */

                        /* Compute overlap size */
                        overlap_size = (size_t)((addr + size) - accum->loc);

                        /* Check for dirty region */
                        if(accum->dirty) {
                            haddr_t dirty_start = accum->loc + accum->dirty_off;    /* File address of start of dirty region */
                            haddr_t dirty_end = dirty_start + accum->dirty_len;               /* File address of end of dirty region */

                            /* Check if entire dirty region is overwritten */
                            if(H5F_addr_le(dirty_end, addr + size)) {
                                accum->dirty = FALSE;
                                accum->dirty_len = 0;
                            } /* end if */
                            else {
                                /* Check for dirty region falling after write */
                                if(H5F_addr_le(addr + size, dirty_start))
                                    accum->dirty_off = overlap_size;
                                else {    /* Dirty region overlaps w/written region */
                                    accum->dirty_off = 0;
                                    accum->dirty_len -= (size_t)((addr + size) - dirty_start);
                                } /* end else */
                            } /* end if */
                        } /* end if */

                        /* Trim bottom of accumulator off */
                        accum->loc += overlap_size;
                        accum->size -= overlap_size;
                        HDmemmove(accum->buf, accum->buf + overlap_size, accum->size);
                    } /* end if */
                    else {        /* Access covers whole accumulator */
                        /* Reset accumulator, but don't flush */
                        if(H5F__accum_reset(fio_info, FALSE) < 0)
                            HGOTO_ERROR(H5E_IO, H5E_CANTRESET, FAIL, "can't reset accumulator")
                    } /* end else */
                } /* end if */
                else {  /* Write starts after beginning of accumulator */
                    size_t overlap_size;    /* Size of overlapping region */

                    /* Sanity check */
                    HDassert(H5F_addr_gt(addr + size, accum->loc + accum->size));

                    /* Compute overlap size */
                    overlap_size = (size_t)((accum->loc + accum->size) - addr);

                    /* Check for dirty region */
                    if(accum->dirty) {
                        haddr_t dirty_start = accum->loc + accum->dirty_off;    /* File address of start of dirty region */
                        haddr_t dirty_end = dirty_start + accum->dirty_len;               /* File address of end of dirty region */

                        /* Check if entire dirty region is overwritten */
                        if(H5F_addr_ge(dirty_start, addr)) {
                            accum->dirty = FALSE;
                            accum->dirty_len = 0;
                        } /* end if */
                        else {
                            /* Check for dirty region falling before write */
                            if(H5F_addr_le(dirty_end, addr))
                                ; /* noop */
                            else    /* Dirty region overlaps w/written region */
                                accum->dirty_len = (size_t)(addr - dirty_start);
                        } /* end if */
                    } /* end if */

                    /* Trim top of accumulator off */
                    accum->size -= overlap_size;
                } /* end else */
            } /* end if */
        } /* end else */
    } /* end if */
    else {
        /* Write the data */
        if(H5FD_write(fio_info->f->shared->lf, fio_info->dxpl, map_type, addr, size, buf) < 0)
            HGOTO_ERROR(H5E_IO, H5E_WRITEERROR, FAIL, "file write failed")
    } /* end else */

done:
    FUNC_LEAVE_NOAPI(ret_value)
} /* end H5F__accum_write() */


/*-------------------------------------------------------------------------
 * Function:    H5F__accum_free
 *
 * Purpose:     Check for free space invalidating [part of] a metadata
 *              accumulator.
 *
 * Return:      Non-negative on success/Negative on failure
 *
 * Programmer:  Quincey Koziol
 *              koziol@hdfgroup.org
 *              Jan 10 2008
 *
 *-------------------------------------------------------------------------
 */
herr_t
H5F__accum_free(const H5F_io_info_t *fio_info, H5FD_mem_t H5_ATTR_UNUSED type, haddr_t addr,
    hsize_t size)
{
    H5F_meta_accum_t *accum;            /* Alias for file's metadata accumulator */
    herr_t ret_value = SUCCEED;         /* Return value */

    FUNC_ENTER_PACKAGE

    /* check arguments */
    HDassert(fio_info);
    HDassert(fio_info->f);
    HDassert(fio_info->dxpl);

    /* Set up alias for file's metadata accumulator info */
    accum = &fio_info->f->shared->accum;

    /* Adjust the metadata accumulator to remove the freed block, if it overlaps */
    if((fio_info->f->shared->feature_flags & H5FD_FEAT_ACCUMULATE_METADATA)
            && H5F_addr_overlap(addr, size, accum->loc, accum->size)) {
        size_t overlap_size;        /* Size of overlap with accumulator */

        /* Sanity check */
        /* (The metadata accumulator should not intersect w/raw data */
        HDassert(H5FD_MEM_DRAW != type);
        HDassert(H5FD_MEM_GHEAP != type); /* (global heap data is being treated as raw data currently) */

        /* Check for overlapping the beginning of the accumulator */
        if(H5F_addr_le(addr, accum->loc)) {
            /* Check for completely overlapping the accumulator */
            if(H5F_addr_ge(addr + size, accum->loc + accum->size)) {
                /* Reset the accumulator, but don't free buffer */
                accum->loc = HADDR_UNDEF;
                accum->size = 0;
                accum->dirty = FALSE;
            } /* end if */
            /* Block to free must end within the accumulator */
            else {
                size_t new_accum_size;      /* Size of new accumulator buffer */

                /* Calculate the size of the overlap with the accumulator, etc. */
                H5_CHECKED_ASSIGN(overlap_size, size_t, (addr + size) - accum->loc, haddr_t);
                new_accum_size = accum->size - overlap_size;

                /* Move the accumulator buffer information to eliminate the freed block */
                HDmemmove(accum->buf, accum->buf + overlap_size, new_accum_size);

                /* Adjust the accumulator information */
                accum->loc += overlap_size;
                accum->size = new_accum_size;

                /* Adjust the dirty region and possibly mark accumulator clean */
                if(accum->dirty) {
                    /* Check if block freed is entirely before dirty region */
                    if(overlap_size < accum->dirty_off)
                        accum->dirty_off -= overlap_size;
                    else {
                        /* Check if block freed ends within dirty region */
                        if(overlap_size < (accum->dirty_off + accum->dirty_len)) {
                            accum->dirty_len = (accum->dirty_off + accum->dirty_len) - overlap_size;
                            accum->dirty_off = 0;
                        } /* end if */
                        /* Block freed encompasses dirty region */
                        else
                            accum->dirty = FALSE;
                    } /* end else */
                } /* end if */
            } /* end else */
        } /* end if */
        /* Block to free must start within the accumulator */
        else {
            haddr_t dirty_end = accum->loc + accum->dirty_off + accum->dirty_len;
            haddr_t dirty_start = accum->loc + accum->dirty_off;

            /* Calculate the size of the overlap with the accumulator */
            H5_CHECKED_ASSIGN(overlap_size, size_t, (accum->loc + accum->size) - addr, haddr_t);

            /* Check if block to free begins before end of dirty region */
            if(accum->dirty && H5F_addr_lt(addr, dirty_end)) {
                haddr_t tail_addr;

                /* Calculate the address of the tail to write */
                tail_addr = addr + size;

                /* Check if the block to free begins before dirty region */
                if(H5F_addr_lt(addr, dirty_start)) {
                    /* Check if block to free is entirely before dirty region */
                    if(H5F_addr_le(tail_addr, dirty_start)) {
                        /* Write out the entire dirty region of the accumulator */
                        if(H5FD_write(fio_info->f->shared->lf, fio_info->dxpl, H5FD_MEM_DEFAULT, dirty_start, accum->dirty_len, accum->buf + accum->dirty_off) < 0)
                            HGOTO_ERROR(H5E_IO, H5E_WRITEERROR, FAIL, "file write failed")
                    } /* end if */
                    /* Block to free overlaps with some/all of dirty region */
                    /* Check for unfreed dirty region to write */
                    else if(H5F_addr_lt(tail_addr, dirty_end)) {
                        size_t write_size;
                        size_t dirty_delta;

                        write_size = (size_t)(dirty_end - tail_addr);
                        dirty_delta = accum->dirty_len - write_size;

                        HDassert(write_size > 0);

                        /* Write out the unfreed dirty region of the accumulator */
                        if(H5FD_write(fio_info->f->shared->lf, fio_info->dxpl, H5FD_MEM_DEFAULT, dirty_start + dirty_delta, write_size, accum->buf + accum->dirty_off + dirty_delta) < 0)
                            HGOTO_ERROR(H5E_IO, H5E_WRITEERROR, FAIL, "file write failed")
                    } /* end if */

                    /* Reset dirty flag */
                    accum->dirty = FALSE;
                } /* end if */
                /* Block to free begins at beginning of or in middle of dirty region */
                else {
                    /* Check if block to free ends before end of dirty region */
                    if(H5F_addr_lt(tail_addr, dirty_end)) {
                        size_t write_size;
                        size_t dirty_delta;

                        write_size = (size_t)(dirty_end - tail_addr);
                        dirty_delta = accum->dirty_len - write_size;

                        HDassert(write_size > 0);

                        /* Write out the unfreed end of the dirty region of the accumulator */
                        if(H5FD_write(fio_info->f->shared->lf, fio_info->dxpl, H5FD_MEM_DEFAULT, dirty_start + dirty_delta, write_size, accum->buf + accum->dirty_off + dirty_delta) < 0)
                            HGOTO_ERROR(H5E_IO, H5E_WRITEERROR, FAIL, "file write failed")
                    } /* end if */

                    /* Check for block to free beginning at same location as dirty region */
                    if(H5F_addr_eq(addr, dirty_start)) {
                        /* Reset dirty flag */
                        accum->dirty = FALSE;
                    } /* end if */
                    /* Block to free eliminates end of dirty region */
                    else {
                        accum->dirty_len = (size_t)(addr - dirty_start);
                    } /* end else */
                } /* end else */

            } /* end if */

            /* Adjust the accumulator information */
            accum->size = accum->size - overlap_size;
        } /* end else */
    } /* end if */

done:
    FUNC_LEAVE_NOAPI(ret_value)
} /* end H5F__accum_free() */


/*-------------------------------------------------------------------------
 * Function:	H5F__accum_flush
 *
 * Purpose:	Flush the metadata accumulator to the file
 *
 * Return:	Non-negative on success/Negative on failure
 *
 * Programmer:	Quincey Koziol
 *		koziol@hdfgroup.org
 *		Jan 10 2008
 *
 *-------------------------------------------------------------------------
 */
herr_t
H5F__accum_flush(const H5F_io_info_t *fio_info)
{
    herr_t      ret_value = SUCCEED;    /* Return value */

    FUNC_ENTER_NOAPI(FAIL)

    HDassert(fio_info);
    HDassert(fio_info->f);
    HDassert(fio_info->dxpl);

    /* Check if we need to flush out the metadata accumulator */
    if((fio_info->f->shared->feature_flags & H5FD_FEAT_ACCUMULATE_METADATA) && fio_info->f->shared->accum.dirty) {
        /* Flush the metadata contents */
        if(H5FD_write(fio_info->f->shared->lf, fio_info->dxpl, H5FD_MEM_DEFAULT, fio_info->f->shared->accum.loc + fio_info->f->shared->accum.dirty_off, fio_info->f->shared->accum.dirty_len, fio_info->f->shared->accum.buf + fio_info->f->shared->accum.dirty_off) < 0)
            HGOTO_ERROR(H5E_IO, H5E_WRITEERROR, FAIL, "file write failed")

        /* Reset the dirty flag */
        fio_info->f->shared->accum.dirty = FALSE;
    } /* end if */

done:
    FUNC_LEAVE_NOAPI(ret_value)
} /* end H5F__accum_flush() */


/*-------------------------------------------------------------------------
 * Function:	H5F__accum_reset
 *
 * Purpose:	Reset the metadata accumulator for the file
 *
 * Return:	Non-negative on success/Negative on failure
 *
 * Programmer:	Quincey Koziol
 *		koziol@hdfgroup.org
 *		Jan 10 2008
 *
 *-------------------------------------------------------------------------
 */
herr_t
H5F__accum_reset(const H5F_io_info_t *fio_info, hbool_t flush)
{
    herr_t      ret_value = SUCCEED;    /* Return value */

    FUNC_ENTER_PACKAGE

    HDassert(fio_info);
    HDassert(fio_info->f);
    HDassert(fio_info->dxpl);

    /* Flush any dirty data in accumulator, if requested */
    if(flush)
        if(H5F__accum_flush(fio_info) < 0)
            HGOTO_ERROR(H5E_FILE, H5E_CANTFLUSH, FAIL, "can't flush metadata accumulator")

    /* Check if we need to reset the metadata accumulator information */
    if(fio_info->f->shared->feature_flags & H5FD_FEAT_ACCUMULATE_METADATA) {
        /* Sanity check */
        HDassert(!fio_info->f->closing || FALSE == fio_info->f->shared->accum.dirty);

        /* Free the buffer */
        if(fio_info->f->shared->accum.buf)
            fio_info->f->shared->accum.buf = H5FL_BLK_FREE(meta_accum, fio_info->f->shared->accum.buf);

        /* Reset the buffer sizes & location */
        fio_info->f->shared->accum.alloc_size = fio_info->f->shared->accum.size = 0;
        fio_info->f->shared->accum.loc = HADDR_UNDEF;
        fio_info->f->shared->accum.dirty = FALSE;
        fio_info->f->shared->accum.dirty_len = 0;
    } /* end if */

done:
    FUNC_LEAVE_NOAPI(ret_value)
} /* end H5F__accum_reset() */

