startTime=1.58112e+07
stopTime=1.6416e+07
tolerance=1e-06
numberOfIntervals=2500
stepSize=241.92
wasm FMU (me: FMI 3.0 Model Exchange, integrated by omc with the model's own solver (DASKR unless its annotation says otherwise; IDA over the fmi-ls-dae residuals for a --daeMode model)): simulate(Buildings.Fluid.DXSystems.Cooling.AirSource.Examples.SpaceCooling,startTime=1.58112e+07,stopTime=1.6416e+07,tolerance=1e-06,numberOfIntervals=2500,outputFormat="empty",variableFilter="",fileNamePrefix="Buildings_13_Buildings.Fluid.DXSystems.Cooling.AirSource.Examples.SpaceCooling",simflags="-abortSlowSimulation -alarm=240  -lv LOG_STATS -startTime=1.58112e+07 -stopTime=1.6416e+07 -tolerance=1e-06 -stepSize=241.92 -noemit -s fmi3:me",resimulateExecutable="../Buildings_13_Buildings_Fluid_DXSystems_Cooling_AirSource_Examples_SpaceCooling.fmu")
LOG_STDOUT        | info    | wasm artifact loaded in 1.8 ms (model kernel linked against the cached adapter, 2.8 MB)
Buildings.Fluid.DXSystems.Cooling.AirSource.Examples.SpaceCooling: logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:391: *** Warning in SpaceCooling.fan: Mover is flow or pressure controlled and uses default pressure curve.
This leads to an approximate power consumption.
Set nominalValuesDefineDefaultPressureCurve=true to suppress this warning.
Buildings.Fluid.DXSystems.Cooling.AirSource.Examples.SpaceCooling: logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:391: *** Warning in SpaceCooling.fan1: Mover is flow or pressure controlled and uses default pressure curve.
This leads to an approximate power consumption.
Set nominalValuesDefineDefaultPressureCurve=true to suppress this warning.
Buildings.Fluid.DXSystems.Cooling.AirSource.Examples.SpaceCooling: logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:391: *** Warning in SpaceCooling.fan2: Mover is flow or pressure controlled and uses default pressure curve.
This leads to an approximate power consumption.
Set nominalValuesDefineDefaultPressureCurve=true to suppress this warning.
Buildings.Fluid.DXSystems.Cooling.AirSource.Examples.SpaceCooling: logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/DXSystems/Cooling/BaseClasses/Evaporation.mo:185: *** Warning: In DX coil model, gamma is too large for these coil conditions.
    Instead of gamma = 1.5, a value of 0.52681, which
    corresponds to a mass transfer effectiveness of 0.8, will be used.
    Coil nominal performance data are:
    nomVal.m_flow_nominal = 0.646123
    dX_nominal = XEvaOut_nominal-XEvaWetBulOut_nominal = 0.00528111 - 0.00637893 = -0.00109782
    QLat_flow_nominal  = -2694
Buildings.Fluid.DXSystems.Cooling.AirSource.Examples.SpaceCooling: logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/DXSystems/Cooling/BaseClasses/Evaporation.mo:185: *** Warning: In DX coil model, gamma is too large for these coil conditions.
    Instead of gamma = 1.5, a value of 0.52681, which
    corresponds to a mass transfer effectiveness of 0.8, will be used.
    Coil nominal performance data are:
    nomVal.m_flow_nominal = 0.646123
    dX_nominal = XEvaOut_nominal-XEvaWetBulOut_nominal = 0.00528111 - 0.00637893 = -0.00109782
    QLat_flow_nominal  = -2694
Buildings.Fluid.DXSystems.Cooling.AirSource.Examples.SpaceCooling: logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/DXSystems/Cooling/BaseClasses/Evaporation.mo:185: *** Warning: In DX coil model, gamma is too large for these coil conditions.
    Instead of gamma = 1.5, a value of 0.52681, which
    corresponds to a mass transfer effectiveness of 0.8, will be used.
    Coil nominal performance data are:
    nomVal.m_flow_nominal = 0.646123
    dX_nominal = XEvaOut_nominal-XEvaWetBulOut_nominal = 0.00528111 - 0.00637893 = -0.00109782
    QLat_flow_nominal  = -2694
Buildings.Fluid.DXSystems.Cooling.AirSource.Examples.SpaceCooling: logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/DXSystems/Cooling/BaseClasses/PartialCapacity.mo:121: *** Warning: Evaporator temperature TEvaIn is out of bounds in DX coil model at time = 1.58491e+07.
    stage     = 1
    TEvaInMin = 285.928 Kelvin (12.7778 degC)
    TEvaIn    = 297.06 Kelvin (23.9098 degC)
    TEvaInMax = 297.039 Kelvin (23.8889 degC)
    Extrapolation can introduce large errors.
    This warning will only be reported once for each stage.
LOG_STDOUT        | info    | ModelExchange instantiated in 1110.5 ms
LOG_STDOUT        | info    | ModelExchange run: 127669 steps, 437902 evaluations, 34340 Jacobians, 2356 state events, 0 time events, 7213 samples in 15177.9 ms
LOG_SUCCESS       | info    | The simulation finished successfully.