Running: ./testmodel.py --libraries=/home/hudson/saved_omc/libraries/.openmodelica/libraries --ompython_omhome=/usr ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant.conf.json
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/package.mo", uses=false) [Timeout 180]
"Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/package.mo): time 0.5608/0.5608, allocations: 120.4 MB / 139.5 MB, free: 13 MB / 138.7 MB
"
[Timeout remaining time 179]
Using package ThermoSysPro with version 4.1 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/package.mo)
Running command: "" <> buildModelFMU(ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant,fileNamePrefix="ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant",fmuType="me",version="2.0",platforms={"static"})
"" <> buildModelFMU(ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant,fileNamePrefix="ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant",fmuType="me",version="2.0",platforms={"static"}) [Timeout 660]
"Notification: Performance of FrontEnd - loaded program: time 3.997e-06/3.997e-06, allocations: 0.75 kB / 216.7 MB, free: 8.637 MB / 202.7 MB
Notification: Performance of FrontEnd - Absyn->SCode: time 1.526e-05/1.926e-05, allocations: 2.281 kB / 216.8 MB, free: 8.633 MB / 202.7 MB
Notification: Automatically loaded package Complex 4.1.0 due to uses annotation from Modelica.
Notification: Automatically loaded package ModelicaServices 4.1.0 due to uses annotation from Modelica.
Notification: Automatically loaded package Modelica 4.1.0 due to usage.
Notification: Performance of NFInst.instantiate(ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant): time 1.257/1.257, allocations: 323.6 MB / 0.5277 GB, free: 11.64 MB / 474.7 MB
Notification: Performance of NFInst.instExpressions: time 0.2118/1.469, allocations: 200.3 MB / 0.7233 GB, free: 3.012 MB / 0.6511 GB
Notification: Performance of NFInst.updateImplicitVariability: time 0.01857/1.488, allocations: 187.6 kB / 0.7234 GB, free: 2.828 MB / 0.6511 GB
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:59:3-61:16:writable] Warning: Connector Ce is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:62:3-63:52:writable] Warning: Connector Cs is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:67:3-71:23:writable] Warning: Connector M is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeD.mo:29:3-31:42:writable] Warning: Connector Ce is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeD.mo:32:3-34:37:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeD.mo:35:3-37:43:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeD.mo:38:3-40:37:writable] Warning: Connector Cs3 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:59:3-61:16:writable] Warning: Connector Ce is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:62:3-63:52:writable] Warning: Connector Cs is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:67:3-71:23:writable] Warning: Connector M is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:59:3-61:16:writable] Warning: Connector Ce is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:62:3-63:52:writable] Warning: Connector Cs is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:67:3-71:23:writable] Warning: Connector M is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:59:3-61:16:writable] Warning: Connector Ce is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:62:3-63:52:writable] Warning: Connector Cs is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:67:3-71:23:writable] Warning: Connector M is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:59:3-61:16:writable] Warning: Connector Ce is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:62:3-63:52:writable] Warning: Connector Cs is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:67:3-71:23:writable] Warning: Connector M is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:59:3-61:16:writable] Warning: Connector Ce is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:62:3-63:52:writable] Warning: Connector Cs is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:67:3-71:23:writable] Warning: Connector M is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:59:3-61:16:writable] Warning: Connector Ce is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:62:3-63:52:writable] Warning: Connector Cs is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:67:3-71:23:writable] Warning: Connector M is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:59:3-61:16:writable] Warning: Connector Ce is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:62:3-63:52:writable] Warning: Connector Cs is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:67:3-71:23:writable] Warning: Connector M is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:25:3-27:42:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:28:3-30:37:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:31:3-33:37:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:38:3-40:43:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:25:3-27:42:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:28:3-30:37:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:31:3-33:37:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:38:3-40:43:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:35:3-37:42:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:38:3-40:37:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:25:3-27:42:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:28:3-30:37:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:31:3-33:37:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:38:3-40:43:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:25:3-27:42:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:28:3-30:37:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:31:3-33:37:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:38:3-40:43:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:35:3-37:42:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:38:3-40:37:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:25:3-27:42:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:28:3-30:37:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:31:3-33:37:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:38:3-40:43:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:35:3-37:42:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:38:3-40:37:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:25:3-27:42:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:28:3-30:37:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:31:3-33:37:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:38:3-40:43:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:35:3-37:42:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:38:3-40:37:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/BoundaryConditions/SinkP.mo:33:3-34:47:writable] Warning: Connector C is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/BoundaryConditions/SourceQ.mo:24:3-25:52:writable] Warning: Connector C is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:35:3-37:42:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:38:3-40:37:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/SimpleDynamicCondenser.mo:89:3-90:45:writable] Warning: Connector Cv is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/SimpleDynamicCondenser.mo:91:3-92:46:writable] Warning: Connector Cl is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/SimpleDynamicCondenser.mo:99:3-100:48:writable] Warning: Connector Cee is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/SimpleDynamicCondenser.mo:101:3-102:43:writable] Warning: Connector Cse is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StaticCentrifugalPump.mo:60:3-62:42:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StaticCentrifugalPump.mo:63:3-65:37:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/StaticWaterWaterExchangerDTorWorEff.mo:69:3-71:37:writable] Warning: Connector Ec is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/StaticWaterWaterExchangerDTorWorEff.mo:72:3-74:42:writable] Warning: Connector Ef is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/StaticWaterWaterExchangerDTorWorEff.mo:75:3-77:37:writable] Warning: Connector Sf is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/StaticWaterWaterExchangerDTorWorEff.mo:78:3-80:36:writable] Warning: Connector Sc is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:65:3-67:38:writable] Warning: Connector Ee is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:68:3-70:36:writable] Warning: Connector Se is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:71:3-73:37:writable] Warning: Connector Ep is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:74:3-76:38:writable] Warning: Connector Sp is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:77:3-79:36:writable] Warning: Connector Ev is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:65:3-67:38:writable] Warning: Connector Ee is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:68:3-70:36:writable] Warning: Connector Se is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:71:3-73:37:writable] Warning: Connector Ep is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:74:3-76:38:writable] Warning: Connector Sp is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:77:3-79:36:writable] Warning: Connector Ev is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:65:3-67:38:writable] Warning: Connector Ee is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:68:3-70:36:writable] Warning: Connector Se is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:71:3-73:37:writable] Warning: Connector Ep is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:74:3-76:38:writable] Warning: Connector Sp is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:77:3-79:36:writable] Warning: Connector Ev is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:65:3-67:38:writable] Warning: Connector Ee is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:68:3-70:36:writable] Warning: Connector Se is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:71:3-73:37:writable] Warning: Connector Ep is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:74:3-76:38:writable] Warning: Connector Sp is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:77:3-79:36:writable] Warning: Connector Ev is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:35:3-37:42:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:38:3-40:37:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeI.mo:28:3-30:67:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeI.mo:31:3-33:68:writable] Warning: Connector Ce3 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeI.mo:34:3-36:67:writable] Warning: Connector Ce4 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeI.mo:37:3-39:74:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeI.mo:40:3-42:73:writable] Warning: Connector Cs4 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeI.mo:43:3-45:72:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeI.mo:46:3-48:73:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeI.mo:49:3-51:74:writable] Warning: Connector Cs3 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:35:3-37:42:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:38:3-40:37:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeI.mo:28:3-30:67:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeI.mo:31:3-33:68:writable] Warning: Connector Ce3 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeI.mo:34:3-36:67:writable] Warning: Connector Ce4 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeI.mo:37:3-39:74:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeI.mo:40:3-42:73:writable] Warning: Connector Cs4 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeI.mo:43:3-45:72:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeI.mo:46:3-48:73:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeI.mo:49:3-51:74:writable] Warning: Connector Cs3 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StaticCentrifugalPump.mo:60:3-62:42:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StaticCentrifugalPump.mo:63:3-65:37:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:65:3-67:38:writable] Warning: Connector Ee is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:68:3-70:36:writable] Warning: Connector Se is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:71:3-73:37:writable] Warning: Connector Ep is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:74:3-76:38:writable] Warning: Connector Sp is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:77:3-79:36:writable] Warning: Connector Ev is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:35:3-37:42:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:38:3-40:37:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:65:3-67:38:writable] Warning: Connector Ee is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:68:3-70:36:writable] Warning: Connector Se is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:71:3-73:37:writable] Warning: Connector Ep is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:74:3-76:38:writable] Warning: Connector Sp is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:77:3-79:36:writable] Warning: Connector Ev is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:35:3-37:42:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:38:3-40:37:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:65:3-67:38:writable] Warning: Connector Ee is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:68:3-70:36:writable] Warning: Connector Se is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:71:3-73:37:writable] Warning: Connector Ep is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:74:3-76:38:writable] Warning: Connector Sp is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:77:3-79:36:writable] Warning: Connector Ev is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/StaticWaterWaterExchangerDTorWorEff.mo:69:3-71:37:writable] Warning: Connector Ec is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/StaticWaterWaterExchangerDTorWorEff.mo:72:3-74:42:writable] Warning: Connector Ef is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/StaticWaterWaterExchangerDTorWorEff.mo:75:3-77:37:writable] Warning: Connector Sf is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/StaticWaterWaterExchangerDTorWorEff.mo:78:3-80:36:writable] Warning: Connector Sc is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:35:3-37:42:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:38:3-40:37:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:35:3-37:42:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:38:3-40:37:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:59:3-61:16:writable] Warning: Connector Ce is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:62:3-63:52:writable] Warning: Connector Cs is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:67:3-71:23:writable] Warning: Connector M is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeD.mo:29:3-31:42:writable] Warning: Connector Ce is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeD.mo:32:3-34:37:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeD.mo:35:3-37:43:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeD.mo:38:3-40:37:writable] Warning: Connector Cs3 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Sensors/SensorT.mo:28:3-30:43:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Sensors/SensorT.mo:31:3-33:38:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/ControlValve.mo:45:3-47:43:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/ControlValve.mo:48:3-50:38:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/ControlValve.mo:45:3-47:43:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/ControlValve.mo:48:3-50:38:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/Combustion/CombustionChambers/GenericCombustion1D.mo:116:3-118:24:writable] Warning: Connector Cfuel is not balanced: The number of potential variables (14) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/Combustion/CombustionChambers/GenericCombustion1D.mo:119:3-121:16:writable] Warning: Connector Ca is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/Combustion/CombustionChambers/GenericCombustion1D.mo:122:3-123:83:writable] Warning: Connector Cfg is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/Combustion/CombustionChambers/GenericCombustion1D.mo:124:3-126:17:writable] Warning: Connector Cws is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/DynamicOnePhaseFlowPipe.mo:115:3-116:48:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/DynamicOnePhaseFlowPipe.mo:117:3-118:46:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/FlueGases/Junctions/Splitter2.mo:24:3-26:16:writable] Warning: Connector Ce is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/FlueGases/Junctions/Splitter2.mo:27:3-28:82:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/FlueGases/Junctions/Splitter2.mo:29:3-31:17:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/FlueGases/HeatExchangers/StaticWallFlueGasesExchanger.mo:89:3-91:16:writable] Warning: Connector C1 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/FlueGases/HeatExchangers/StaticWallFlueGasesExchanger.mo:94:3-95:83:writable] Warning: Connector C2 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/DynamicTwoPhaseFlowPipe.mo:184:3-185:48:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/DynamicTwoPhaseFlowPipe.mo:188:3-189:46:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:35:3-36:82:writable] Warning: Connector Cfg1 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:37:3-39:17:writable] Warning: Connector Cfg2 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:40:3-42:16:writable] Warning: Connector Cws1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:43:3-44:83:writable] Warning: Connector Cws2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/FlueGases/BoundaryConditions/Sink.mo:15:3-17:16:writable] Warning: Connector C is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/FlueGases/HeatExchangers/StaticWallFlueGasesExchanger.mo:89:3-91:16:writable] Warning: Connector C1 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/FlueGases/HeatExchangers/StaticWallFlueGasesExchanger.mo:94:3-95:83:writable] Warning: Connector C2 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/DynamicTwoPhaseFlowPipe.mo:184:3-185:48:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/DynamicTwoPhaseFlowPipe.mo:188:3-189:46:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:35:3-36:82:writable] Warning: Connector Cfg1 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:37:3-39:17:writable] Warning: Connector Cfg2 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:40:3-42:16:writable] Warning: Connector Cws1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:43:3-44:83:writable] Warning: Connector Cws2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/FlueGases/HeatExchangers/StaticWallFlueGasesExchanger.mo:89:3-91:16:writable] Warning: Connector C1 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/FlueGases/HeatExchangers/StaticWallFlueGasesExchanger.mo:94:3-95:83:writable] Warning: Connector C2 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/DynamicTwoPhaseFlowPipe.mo:184:3-185:48:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/DynamicTwoPhaseFlowPipe.mo:188:3-189:46:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:35:3-36:82:writable] Warning: Connector Cfg1 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:37:3-39:17:writable] Warning: Connector Cfg2 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:40:3-42:16:writable] Warning: Connector Cws1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:43:3-44:83:writable] Warning: Connector Cws2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/SingularPressureLoss.mo:25:3-27:16:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/SingularPressureLoss.mo:28:3-29:52:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/FlueGases/HeatExchangers/StaticWallFlueGasesExchanger.mo:89:3-91:16:writable] Warning: Connector C1 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/FlueGases/HeatExchangers/StaticWallFlueGasesExchanger.mo:94:3-95:83:writable] Warning: Connector C2 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/DynamicTwoPhaseFlowPipe.mo:184:3-185:48:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/DynamicTwoPhaseFlowPipe.mo:188:3-189:46:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:35:3-36:82:writable] Warning: Connector Cfg1 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:37:3-39:17:writable] Warning: Connector Cfg2 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:40:3-42:16:writable] Warning: Connector Cws1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:43:3-44:83:writable] Warning: Connector Cws2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/SingularPressureLoss.mo:25:3-27:16:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/SingularPressureLoss.mo:28:3-29:52:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/FlueGases/HeatExchangers/StaticWallFlueGasesExchanger.mo:89:3-91:16:writable] Warning: Connector C1 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/FlueGases/HeatExchangers/StaticWallFlueGasesExchanger.mo:94:3-95:83:writable] Warning: Connector C2 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/DynamicTwoPhaseFlowPipe.mo:184:3-185:48:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/DynamicTwoPhaseFlowPipe.mo:188:3-189:46:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:35:3-36:82:writable] Warning: Connector Cfg1 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:37:3-39:17:writable] Warning: Connector Cfg2 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:40:3-42:16:writable] Warning: Connector Cws1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:43:3-44:83:writable] Warning: Connector Cws2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/FlueGases/HeatExchangers/StaticWallFlueGasesExchanger.mo:89:3-91:16:writable] Warning: Connector C1 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/FlueGases/HeatExchangers/StaticWallFlueGasesExchanger.mo:94:3-95:83:writable] Warning: Connector C2 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/DynamicTwoPhaseFlowPipe.mo:184:3-185:48:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/DynamicTwoPhaseFlowPipe.mo:188:3-189:46:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:35:3-36:82:writable] Warning: Connector Cfg1 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:37:3-39:17:writable] Warning: Connector Cfg2 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:40:3-42:16:writable] Warning: Connector Cws1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:43:3-44:83:writable] Warning: Connector Cws2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/FlueGases/PressureLosses/InvSingularPressureLoss.mo:19:3-21:42:writable] Warning: Connector C1 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/FlueGases/PressureLosses/InvSingularPressureLoss.mo:22:3-24:37:writable] Warning: Connector C2 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/FlueGases/Junctions/Mixer2.mo:24:3-26:24:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/FlueGases/Junctions/Mixer2.mo:27:3-28:52:writable] Warning: Connector Cs is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/FlueGases/Junctions/Mixer2.mo:30:3-32:17:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/FlueGases/HeatExchangers/StaticFluegasesFluegasesExchangerKS.mo:30:3-31:83:writable] Warning: Connector Sc is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/FlueGases/HeatExchangers/StaticFluegasesFluegasesExchangerKS.mo:32:3-34:16:writable] Warning: Connector Ec is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/FlueGases/HeatExchangers/StaticFluegasesFluegasesExchangerKS.mo:35:3-37:16:writable] Warning: Connector Ef is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/FlueGases/HeatExchangers/StaticFluegasesFluegasesExchangerKS.mo:38:3-39:83:writable] Warning: Connector Sf is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/FlueGases/BoundaryConditions/SourcePQ.mo:18:3-19:83:writable] Warning: Connector C is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/FlueGases/Volumes/VolumeATh.mo:49:3-51:16:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/FlueGases/Volumes/VolumeATh.mo:52:3-54:16:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/FlueGases/Volumes/VolumeATh.mo:55:3-56:83:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/FlueGases/Volumes/VolumeATh.mo:59:3-60:83:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:25:3-27:42:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:28:3-30:37:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:31:3-33:37:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:38:3-40:43:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:25:3-27:42:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:28:3-30:37:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:31:3-33:37:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:38:3-40:43:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/BoundaryConditions/SourcePQ.mo:29:3-30:52:writable] Warning: Connector C is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/Combustion/BoundaryConditions/FuelSourcePQ.mo:21:3-22:65:writable] Warning: Connector C is not balanced: The number of potential variables (14) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/ControlValve.mo:45:3-47:43:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/ControlValve.mo:48:3-50:38:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/LoopBreakers/LoopBreakerP.mo:6:3-8:16:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/LoopBreakers/LoopBreakerP.mo:9:3-10:83:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/LoopBreakers/LoopBreakerP.mo:6:3-8:16:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/LoopBreakers/LoopBreakerP.mo:9:3-10:83:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/LoopBreakers/LoopBreakerP.mo:6:3-8:16:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/LoopBreakers/LoopBreakerP.mo:9:3-10:83:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Sensors/SensorQ.mo:19:3-21:43:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Sensors/SensorQ.mo:22:3-24:38:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Sensors/SensorQ.mo:19:3-21:43:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Sensors/SensorQ.mo:22:3-24:38:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:35:3-37:42:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:38:3-40:37:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/ControlValve.mo:45:3-47:43:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/ControlValve.mo:48:3-50:38:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:35:3-37:42:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:38:3-40:37:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:35:3-37:42:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:38:3-40:37:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:25:3-27:42:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:28:3-30:37:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:31:3-33:37:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:38:3-40:43:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/SingularPressureLoss.mo:25:3-27:16:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/SingularPressureLoss.mo:28:3-29:52:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/CheckValve.mo:38:3-39:49:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/CheckValve.mo:40:3-41:47:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Sensors/SensorQ.mo:19:3-21:43:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Sensors/SensorQ.mo:22:3-24:38:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeB.mo:29:3-31:42:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeB.mo:32:3-34:37:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeB.mo:35:3-37:37:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeB.mo:38:3-40:43:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:65:3-67:38:writable] Warning: Connector Ee is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:68:3-70:36:writable] Warning: Connector Se is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:71:3-73:37:writable] Warning: Connector Ep is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:74:3-76:38:writable] Warning: Connector Sp is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:77:3-79:36:writable] Warning: Connector Ev is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:65:3-67:38:writable] Warning: Connector Ee is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:68:3-70:36:writable] Warning: Connector Se is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:71:3-73:37:writable] Warning: Connector Ep is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:74:3-76:38:writable] Warning: Connector Sp is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:77:3-79:36:writable] Warning: Connector Ev is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeB.mo:29:3-31:42:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeB.mo:32:3-34:37:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeB.mo:35:3-37:37:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeB.mo:38:3-40:43:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeB.mo:29:3-31:42:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeB.mo:32:3-34:37:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeB.mo:35:3-37:37:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeB.mo:38:3-40:43:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:25:3-27:42:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:28:3-30:37:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:31:3-33:37:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:38:3-40:43:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:25:3-27:42:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:28:3-30:37:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:31:3-33:37:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:38:3-40:43:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/SingularPressureLoss.mo:25:3-27:16:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/SingularPressureLoss.mo:28:3-29:52:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/LoopBreakers/LoopBreakerP.mo:6:3-8:16:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/LoopBreakers/LoopBreakerP.mo:9:3-10:83:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/SingularPressureLoss.mo:25:3-27:16:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/SingularPressureLoss.mo:28:3-29:52:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/SingularPressureLoss.mo:25:3-27:16:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/SingularPressureLoss.mo:28:3-29:52:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/SingularPressureLoss.mo:25:3-27:16:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/SingularPressureLoss.mo:28:3-29:52:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/SingularPressureLoss.mo:25:3-27:16:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/SingularPressureLoss.mo:28:3-29:52:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/SingularPressureLoss.mo:25:3-27:16:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/SingularPressureLoss.mo:28:3-29:52:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:25:3-27:42:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:28:3-30:37:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:31:3-33:37:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:38:3-40:43:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:25:3-27:42:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:28:3-30:37:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:31:3-33:37:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:38:3-40:43:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
Notification: Performance of NFTyping.typeComponents: time 0.01134/1.499, allocations: 4.143 MB / 0.7275 GB, free: 14.69 MB / 0.6667 GB
Notification: Performance of NFTyping.typeBindings: time 0.03381/1.533, allocations: 12.42 MB / 0.7396 GB, free: 2.195 MB / 0.6667 GB
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/Properties/WaterSteam/IF97_packages.mo:783:9-783:27:writable] Warning: cv was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/Properties/WaterSteam/IF97_packages.mo:850:9-850:27:writable] Warning: cv was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/Properties/WaterSteam/IF97_packages.mo:1088:9-1088:27:writable] Warning: cv was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/Properties/WaterSteamSimple/prop4_Ph.mo:69:3-69:60:writable] Warning: dh1satp was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/Properties/WaterSteamSimple/prop4_Ph.mo:69:3-69:60:writable] Warning: dh2satp was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/Properties/WaterSteamSimple/prop4_Ph_der.mo:167:3-170:49:writable] Warning: du1satp_der was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/Properties/WaterSteamSimple/prop4_Ph_der.mo:167:3-170:49:writable] Warning: du2satp_der was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/Properties/WaterSteam/IF97_packages.mo:1445:9-1445:35:writable] Warning: h was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/Properties/WaterSteamSimple/prop4_Ps.mo:71:3-71:60:writable] Warning: dh1satp was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/Properties/WaterSteamSimple/prop4_Ps.mo:71:3-71:60:writable] Warning: dh2satp was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed.
Notification: Performance of NFTyping.typeClassSections: time 0.4168/1.95, allocations: 24.19 MB / 0.7632 GB, free: 11.18 MB / 0.6667 GB
Notification: Performance of NFFlatten.flatten: time 0.0594/2.009, allocations: 56.01 MB / 0.8179 GB, free: 1.77 MB / 0.6667 GB
Notification: Performance of NFFlatten.resolveConnections: time 0.03039/2.039, allocations: 15.27 MB / 0.8328 GB, free: 15.1 MB / 0.6823 GB
Notification: Performance of NFEvalConstants.evaluate: time 0.07618/2.115, allocations: 27.99 MB / 0.8602 GB, free: 13.09 MB / 0.698 GB
Notification: Performance of NFSimplifyModel.simplify: time 0.03596/2.151, allocations: 16.38 MB / 0.8762 GB, free: 13.83 MB / 0.7136 GB
Notification: Performance of NFPackage.collectConstants: time 0.01419/2.166, allocations: 3.527 MB / 0.8796 GB, free: 10.3 MB / 0.7136 GB
Notification: Performance of NFFlatten.collectFunctions: time 0.05651/2.222, allocations: 30.07 MB / 0.909 GB, free: 12.67 MB / 0.7448 GB
Notification: Performance of NFScalarize.scalarize: time 0.01676/2.239, allocations: 10.32 MB / 0.9191 GB, free: 2.977 MB / 0.7448 GB
Notification: Performance of NFVerifyModel.verify: time 0.03212/2.271, allocations: 12.59 MB / 0.9314 GB, free: 6.98 MB / 0.7605 GB
Notification: Performance of NFConvertDAE.convert: time 0.09583/2.367, allocations: 62.41 MB / 0.9923 GB, free: 11.43 MB / 0.823 GB
Notification: Performance of FrontEnd - DAE generated: time 7.384e-06/2.367, allocations: 0 / 0.9923 GB, free: 11.43 MB / 0.823 GB
Notification: Performance of FrontEnd: time 3.978e-06/2.367, allocations: 4 kB / 0.9923 GB, free: 11.43 MB / 0.823 GB
Notification: Performance of Transformations before backend: time 0.001897/2.369, allocations: 1.094 kB / 0.9923 GB, free: 11.43 MB / 0.823 GB
Notification: Model statistics after passing the front-end and creating the data structures used by the back-end:
 * Number of equations: 8847
 * Number of variables: 8847
Notification: Performance of Generate backend data structure: time 0.1063/2.475, allocations: 50.61 MB / 1.042 GB, free: 8.805 MB / 0.8698 GB
Notification: Performance of prepare preOptimizeDAE: time 5.454e-05/2.475, allocations: 8.031 kB / 1.042 GB, free: 8.797 MB / 0.8698 GB
Notification: Performance of preOpt introduceOutputAliases (simulation): time 0.01219/2.487, allocations: 3.979 MB / 1.046 GB, free: 4.805 MB / 0.8698 GB
Notification: Performance of preOpt normalInlineFunction (simulation): time 0.0182/2.506, allocations: 4.572 MB / 1.05 GB, free: 216 kB / 0.8698 GB
Notification: Performance of preOpt evaluateParameters (simulation): time 0.6579/3.163, allocations: 10.28 MB / 1.06 GB, free: 164 MB / 0.8699 GB
Notification: Performance of preOpt simplifyIfEquations (simulation): time 0.00807/3.171, allocations: 11.44 MB / 1.071 GB, free: 153.4 MB / 0.8699 GB
Notification: Performance of preOpt expandDerOperator (simulation): time 0.01119/3.183, allocations: 2.107 MB / 1.073 GB, free: 153.4 MB / 0.8699 GB
Notification: Performance of preOpt clockPartitioning (simulation): time 0.09075/3.273, allocations: 45.6 MB / 1.118 GB, free: 148.4 MB / 0.8699 GB
Notification: Performance of preOpt findStateOrder (simulation): time 0.0004761/3.274, allocations: 59.22 kB / 1.118 GB, free: 148.4 MB / 0.8699 GB
Notification: Performance of preOpt replaceEdgeChange (simulation): time 0.003326/3.277, allocations: 0.8613 MB / 1.119 GB, free: 148.4 MB / 0.8699 GB
Notification: Performance of preOpt inlineArrayEqn (simulation): time 0.001169/3.278, allocations: 1.297 MB / 1.12 GB, free: 148.4 MB / 0.8699 GB
Notification: Performance of preOpt removeEqualRHS (simulation): time 0.08546/3.364, allocations: 47 MB / 1.166 GB, free: 136.4 MB / 0.8699 GB
Warning: The model contains alias variables with redundant start and/or conflicting nominal values. It is recommended to resolve the conflicts, because otherwise the system could be hard to solve. To print the conflicting alias sets and the chosen candidates please use -d=aliasConflicts.
Notification: Performance of preOpt removeSimpleEquations (simulation): time 0.2321/3.596, allocations: 142 MB / 1.305 GB, free: 5.387 MB / 0.8699 GB
Notification: Performance of preOpt comSubExp (simulation): time 0.06376/3.66, allocations: 36.33 MB / 1.34 GB, free: 0.8203 MB / 0.9012 GB
Notification: Performance of preOpt resolveLoops (simulation): time 0.04678/3.706, allocations: 26.96 MB / 1.366 GB, free: 5.824 MB / 0.9324 GB
Notification: Performance of preOpt evalFunc (simulation): time 0.5683/4.275, allocations: 107.6 MB / 1.471 GB, free: 461.9 MB / 0.9481 GB
Notification: Performance of preOpt encapsulateWhenConditions (simulation): time 0.0488/4.324, allocations: 31.91 MB / 1.503 GB, free: 430.5 MB / 0.9481 GB
Notification: Performance of pre-optimization done (n=5838): time 3.031e-05/4.324, allocations: 0 / 1.503 GB, free: 430.5 MB / 0.9481 GB
Notification: Performance of matching and sorting (n=5848): time 0.5664/4.89, allocations: 270.4 MB / 1.767 GB, free: 162.9 MB / 0.9481 GB
Notification: Performance of inlineWhenForInitialization (initialization): time 0.0002587/4.89, allocations: 1.066 MB / 1.768 GB, free: 161.7 MB / 0.9481 GB
Notification: Performance of selectInitializationVariablesDAE (initialization): time 0.007448/4.898, allocations: 7.108 MB / 1.775 GB, free: 154.7 MB / 0.9481 GB
Notification: Performance of collectPreVariables (initialization): time 0.008026/4.906, allocations: 434.8 kB / 1.775 GB, free: 154.3 MB / 0.9481 GB
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/CheckValve.mo:7:3-8:32:writable] Warning: The parameter CheckValve.k has fixed = false and a binding equation CheckValve.k = 100.0, which is probably redundant.
Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/SingularPressureLoss.mo:3:3-3:53:writable] Warning: The parameter singularPressureLoss_Eco.K has fixed = false and a binding equation singularPressureLoss_Eco.K = 3867.0, which is probably redundant.
Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:3:3-3:59:writable] Warning: The parameter lumpedStraightPipe_HP2.K has fixed = false and a binding equation lumpedStraightPipe_HP2.K = 1e-4, which is probably redundant.
Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/SingularPressureLoss.mo:3:3-3:53:writable] Warning: The parameter singularPressureLoss_RBT.K has fixed = false and a binding equation singularPressureLoss_RBT.K = 34.39, which is probably redundant.
Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/SingularPressureLoss.mo:3:3-3:53:writable] Warning: The parameter singularPressureLoss_SBT.K has fixed = false and a binding equation singularPressureLoss_SBT.K = 910.878, which is probably redundant.
Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/ControlValve.mo:3:3-4:43:writable] Warning: The parameter controlValveIP.Cvmax has fixed = false and a binding equation controlValveIP.Cvmax = 8005.0, which is probably redundant.
Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/ControlValve.mo:3:3-4:43:writable] Warning: The parameter controlValveHP.Cvmax has fixed = false and a binding equation controlValveHP.Cvmax = 8005.0, which is probably redundant.
Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:3:3-3:58:writable] Warning: The parameter Turbine_HP1.Cst has fixed = false and a binding equation Turbine_HP1.Cst = 279474.0, which is probably redundant.
Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:3:3-3:59:writable] Warning: The parameter lumpedStraightPipe_HP_IP.K has fixed = false and a binding equation lumpedStraightPipe_HP_IP.K = 10.0, which is probably redundant.
Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:3:3-3:59:writable] Warning: The parameter lumpedStraightPipe_HP.K has fixed = false and a binding equation lumpedStraightPipe_HP.K = 10.0, which is probably redundant.
Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:3:3-3:59:writable] Warning: The parameter lumpedStraightPipe_HP1.K has fixed = false and a binding equation lumpedStraightPipe_HP1.K = 10.0, which is probably redundant.
Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StaticCentrifugalPump.mo:22:3-23:69:writable] Warning: The parameter staticCentrifugalPump1.a1 has fixed = false and a binding equation staticCentrifugalPump1.a1 = -3050.0, which is probably redundant.
Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:3:3-3:59:writable] Warning: The parameter lumpedStraightPipe_IP1.K has fixed = false and a binding equation lumpedStraightPipe_IP1.K = 10.0, which is probably redundant.
Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StaticCentrifugalPump.mo:22:3-23:69:writable] Warning: The parameter staticCentrifugalPump.a1 has fixed = false and a binding equation staticCentrifugalPump.a1 = -390.0, which is probably redundant.
Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:3:3-3:59:writable] Warning: The parameter lumpedStraightPipe_LP3.K has fixed = false and a binding equation lumpedStraightPipe_LP3.K = 10.0, which is probably redundant.
Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:3:3-3:59:writable] Warning: The parameter lumpedStraightPipe_LP2.K has fixed = false and a binding equation lumpedStraightPipe_LP2.K = 10.0, which is probably redundant.
Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:3:3-3:59:writable] Warning: The parameter lumpedStraightPipe_LP1.K has fixed = false and a binding equation lumpedStraightPipe_LP1.K = 10.0, which is probably redundant.
Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:3:3-3:59:writable] Warning: The parameter lumpedStraightPipe_IP3.K has fixed = false and a binding equation lumpedStraightPipe_IP3.K = 10.0, which is probably redundant.
Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:3:3-3:58:writable] Warning: The parameter Echappement.Cst has fixed = false and a binding equation Echappement.Cst = 14.7, which is probably redundant.
Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:3:3-3:58:writable] Warning: The parameter Turbine_LP3.Cst has fixed = false and a binding equation Turbine_LP3.Cst = 59.4076, which is probably redundant.
Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:3:3-3:58:writable] Warning: The parameter Turbine_IP3.Cst has fixed = false and a binding equation Turbine_IP3.Cst = 34076.9, which is probably redundant.
Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:3:3-3:58:writable] Warning: The parameter Turbine_LP1.Cst has fixed = false and a binding equation Turbine_LP1.Cst = 4485.97, which is probably redundant.
Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:3:3-3:58:writable] Warning: The parameter Turbine_IP1.Cst has fixed = false and a binding equation Turbine_IP1.Cst = 102478.0, which is probably redundant.
Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:3:3-3:58:writable] Warning: The parameter Turbine_LP2.Cst has fixed = false and a binding equation Turbine_LP2.Cst = 1215.75, which is probably redundant.
Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:3:3-3:58:writable] Warning: The parameter Turbine_IP2.Cst has fixed = false and a binding equation Turbine_IP2.Cst = 53802.6, which is probably redundant.
Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:3:3-3:58:writable] Warning: The parameter Turbine_HP.Cst has fixed = false and a binding equation Turbine_HP.Cst = 2.00537e6, which is probably redundant.
Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding.
Notification: Performance of collectInitialEqns (initialization): time 0.003517/4.909, allocations: 6.414 MB / 1.781 GB, free: 148.7 MB / 0.9481 GB
Notification: Performance of collectInitialBindings (initialization): time 0.01739/4.927, allocations: 19.9 MB / 1.801 GB, free: 130.5 MB / 0.9481 GB
Notification: Performance of simplifyInitialFunctions (initialization): time 0.01057/4.937, allocations: 6.496 MB / 1.807 GB, free: 124 MB / 0.9481 GB
Notification: Performance of setup shared object (initialization): time 3.344e-05/4.937, allocations: 301.1 kB / 1.807 GB, free: 123.7 MB / 0.9481 GB
Notification: Performance of preBalanceInitialSystem (initialization): time 0.03543/4.973, allocations: 24.57 MB / 1.831 GB, free: 99.06 MB / 0.9481 GB
Notification: Performance of partitionIndependentBlocks (initialization): time 0.04596/5.019, allocations: 31 MB / 1.862 GB, free: 66.36 MB / 0.9481 GB
Notification: It was not possible to check the given initialization system for consistency symbolically, because the relevant equations are part of an algebraic loop. This is not supported yet.
Notification: Performance of analyzeInitialSystem (initialization): time 1.554/6.573, allocations: 0.601 GB / 2.463 GB, free: 425.2 MB / 0.9481 GB
Notification: Performance of solveInitialSystemEqSystem (initialization): time 0.0001611/6.573, allocations: 31.34 kB / 2.463 GB, free: 425.2 MB / 0.9481 GB
Notification: Performance of matching and sorting (n=6519) (initialization): time 0.1588/6.732, allocations: 83.27 MB / 2.544 GB, free: 358.8 MB / 0.9481 GB
Notification: Performance of prepare postOptimizeDAE: time 0.0001199/6.732, allocations: 111.3 kB / 2.544 GB, free: 358.7 MB / 0.9481 GB
Notification: Performance of postOpt simplifyComplexFunction (initialization): time 0.000293/6.732, allocations: 131.9 kB / 2.544 GB, free: 358.6 MB / 0.9481 GB
Notification: Performance of postOpt tearingSystem (initialization): time 1.325/8.058, allocations: 0.8491 GB / 3.393 GB, free: 403.6 MB / 0.9481 GB
Notification: Performance of postOpt solveSimpleEquations (initialization): time 0.005203/8.063, allocations: 1.689 MB / 3.395 GB, free: 402.4 MB / 0.9481 GB
Notification: Performance of postOpt calculateStrongComponentJacobians (initialization): time 0.008005/8.071, allocations: 12.52 MB / 3.407 GB, free: 390.7 MB / 0.9481 GB
Notification: Performance of postOpt simplifyAllExpressions (initialization): time 0.02463/8.095, allocations: 2.815 MB / 3.41 GB, free: 389.2 MB / 0.9481 GB
Notification: Performance of postOpt collapseArrayExpressions (initialization): time 0.008592/8.104, allocations: 1.237 MB / 3.411 GB, free: 388.4 MB / 0.9481 GB
Warning: Assuming fixed start value for the following 4 variables:
         TemperatureControl.pIsat.Integrateur1.x0:DISCRETE(fixed = true protected = true )  type: Real
         regulation_Level_Condenser.pIsat.Integrateur1.x0:DISCRETE(fixed = true protected = true )  type: Real
         regulation_Level_Condenser.pIsat1.Integrateur1.x0:DISCRETE(fixed = true protected = true )  type: Real
         Pump_VelocityControl.pIsat.Integrateur1.x0:DISCRETE(fixed = true protected = true )  type: Real
Warning: The initial conditions are over specified. The following 30 initial equations are redundant, so they are removed from the initialization system:
         $DER.splitter_TurbineIP2.P = 0.0
         $DER.splitter_Turbine_HP.P = 0.0
         $DER.Boiler_walls.TwoPhaseFlowPipe.Q[1] = 0.0
         $DER.RMT_RHT.TwoPhaseFlowPipe.Q[4] = 0.0
         $DER.SBT.TwoPhaseFlowPipe.Q[1] = 0.0
         $DER.RBT.TwoPhaseFlowPipe.Q[1] = 0.0
         $DER.RBT.TwoPhaseFlowPipe.Q[4] = 0.0
         $DER.Economiseur.TwoPhaseFlowPipe.Q[1] = 0.0
         $DER.SMT_SHT.TwoPhaseFlowPipe.Q[3] = 0.0
         $DER.SMT_SHT.TwoPhaseFlowPipe.Q[4] = 0.0
         $DER.volumeA.P = 0.0
         $DER.TemperatureControl.pIsat.Integrateur1.x = 0.0
         $DER.volume_HP2.P = 0.0
         $DER.volume_HP1Vap1.P = 0.0
         $DER.volume_HP21.P = 0.0
         $DER.volume_HP21.h = 0.0
         $DER.pT1_2.x = 0.0
         CheckValve.Q = $START.CheckValve.Q
         SMT_SHT.TwoPhaseFlowPipe.P[5] = $START.SMT_SHT.TwoPhaseFlowPipe.P[5]
         RMT_RHT.TwoPhaseFlowPipe.P[5] = $START.RMT_RHT.TwoPhaseFlowPipe.P[5]
         lumpedStraightPipe_HP_IP.Q = $START.lumpedStraightPipe_HP_IP.Q
         lumpedStraightPipe_LP3.Q = $START.lumpedStraightPipe_LP3.Q
         splitter_TurbineLP3.P = $START.splitter_TurbineLP3.P
         lumpedStraightPipe_LP2.Q = $START.lumpedStraightPipe_LP2.Q
         splitter_TurbineLP2.P = $START.splitter_TurbineLP2.P
         lumpedStraightPipe_LP1.Q = $START.lumpedStraightPipe_LP1.Q
         splitter_TurbineLP1.P = $START.splitter_TurbineLP1.P
         splitter_TurbineIP3.P = $START.splitter_TurbineIP3.P
         splitter_TurbineIP2.P = $START.splitter_TurbineIP2.P
         Turbine_HP.Pe = $START.Turbine_HP.Pe.
Notification: Model statistics after passing the back-end for initialization:
 * Number of independent subsystems: 484
 * Number of states: 0 ()
 * Number of discrete variables: 348 ($PRE.TemperatureControl.pIsat.Integrateur1.x0,TemperatureControl.pIsat.Integrateur1.x0,$PRE.regulation_Level_Condenser.pIsat.Integrateur1.x0,regulation_Level_Condenser.pIsat.Integrateur1.x0,$PRE.regulation_Level_Condenser.pIsat1.Integrateur1.x0,regulation_Level_Condenser.pIsat1.Integrateur1.x0,$PRE.Pump_VelocityControl.pIsat.Integrateur1.x0,Pump_VelocityControl.pIsat.Integrateur1.x0,$PRE.CheckValve.touvert,$whenCondition2,$PRE.CheckValve.tferme,$whenCondition1,Pump_VelocityControl.pIsat.Integrateur1.reset.signal,regulation_Level_Condenser.pIsat.Integrateur1.reset.signal,TemperatureControl.pIsat.Integrateur1.reset.signal,CheckValve.tferme,CheckValve.touvert,CheckValve.ouvert,$PRE.CheckValve.ouvert,regulation_Level_Condenser.echelon.yL.signal,regulation_Level_Condenser.edge.yL.signal,regulation_Level_Condenser.edge.uL.signal,$PRE.regulation_Level_Condenser.edge.uL.signal,$whenCondition3,volume_HP22.Cs2.b,volume_HP22.Cs1.b,volume_HP22.Ce2.a,volume_HP22.Ce1.a,volume_HP21.Cs2.b,volume_HP21.Cs1.b,volume_HP21.Ce2.a,volume_HP21.Ce1.a,singularPressureLoss7.C2.b,singularPressureLoss7.C1.a,singularPressureLoss6.C2.b,singularPressureLoss6.C1.a,singularPressureLoss5.C2.b,singularPressureLoss5.C1.a,singularPressureLoss4.C2.b,singularPressureLoss4.C1.a,singularPressureLoss3.C2.b,singularPressureLoss3.C1.a,singularPressureLoss2.C2.b,singularPressureLoss2.C1.a,singularPressureLoss1.C2.b,singularPressureLoss1.C1.a,volume_HP1Vap1.Cs2.b,volume_HP1Vap1.Cs1.b,volume_HP1Vap1.Ce2.a,volume_HP1Vap1.Ce1.a,volume_HP1Vap.Cs2.b,volume_HP1Vap.Cs1.b,volume_HP1Vap.Ce2.a,volume_HP1Vap.Ce1.a,volume_HP3.Cs2.b,volume_HP3.Cs1.b,volume_HP3.Ce2.a,volume_HP3.Ce1.a,volume_HP2.Cs2.b,volume_HP2.Cs1.b,volume_HP2.Ce2.a,volume_HP2.Ce1.a,ReheaterHP2_1.Ev.a,ReheaterHP2_1.Sp.b,ReheaterHP2_1.Ep.a,ReheaterHP2_1.Se.b,ReheaterHP2_1.Ee.a,ReheaterHP1_1.Ev.a,ReheaterHP1_1.Sp.b,ReheaterHP1_1.Ep.a,ReheaterHP1_1.Se.b,ReheaterHP1_1.Ee.a,volume_HP1.Cs2.b,volume_HP1.Cs1.b,volume_HP1.Ce2.a,volume_HP1.Ce1.a,sensorQ.C2.b,sensorQ.C1.a,CheckValve.C2.b,CheckValve.C1.a,singularPressureLoss_Eco.C2.b,singularPressureLoss_Eco.C1.a,splitter_condenser.Cs2.b,splitter_condenser.Cs1.b,splitter_condenser.Ce2.a,splitter_condenser.Ce1.a,lumpedStraightPipe_HP2.C2.b,lumpedStraightPipe_HP2.C1.a,lumpedStraightPipe_Condenser1.C2.b,lumpedStraightPipe_Condenser1.C1.a,controlValve_Condenser.C2.b,controlValve_Condenser.C1.a,lumpedStraightPipe_Low.C2.b,lumpedStraightPipe_Low.C1.a,Sensor_Qvap_Cond2.C2.b,Sensor_Qvap_Cond2.C1.a,Sensor_Qvap_Cond.C2.b,Sensor_Qvap_Cond.C1.a,loopBreakerP_Cond.C2.b,loopBreakerP_Cond.C1.a,loopBreakerP_ReDrum.C2.b,loopBreakerP_ReDrum.C1.a,loopBreakerP_Drum_2.C2.b,loopBreakerP_Drum_2.C1.a,controlValveEco.C2.b,controlValveEco.C1.a,fuelSourcePQ.C.b,sourceQ.C.b,volumeA.Cs2.b,volumeA.Cs1.b,volumeA.Ce2.a,volumeA.Ce1.a,volumeA1.Cs2.b,volumeA1.Cs1.b,volumeA1.Ce2.a,volumeA1.Ce1.a,AirPreheater.Ce2.a,AirPreheater.Cs1.b,AirPreheater.Cs2.b,AirPreheater.Ce1.a,sourceAir.C.b,RA.Sf.b,RA.Ef.a,RA.Ec.a,RA.Sc.b,mixer2_1.Ce1.a,mixer2_1.Cs.b,mixer2_1.Ce2.a,singularPressureLoss.C2.b,singularPressureLoss.C1.a,SMT_SHT.TwoPhaseFlowPipe.C2.b,SMT_SHT.TwoPhaseFlowPipe.C1.a,SMT_SHT.ExchangerFlueGasesMetal.C2.b,SMT_SHT.ExchangerFlueGasesMetal.C1.a,Economiseur.TwoPhaseFlowPipe.C2.b,Economiseur.TwoPhaseFlowPipe.C1.a,Economiseur.ExchangerFlueGasesMetal.C2.b,Economiseur.ExchangerFlueGasesMetal.C1.a,singularPressureLoss_RBT.C2.b,singularPressureLoss_RBT.C1.a,RBT.TwoPhaseFlowPipe.C2.b,RBT.TwoPhaseFlowPipe.C1.a,RBT.ExchangerFlueGasesMetal.C2.b,RBT.ExchangerFlueGasesMetal.C1.a,singularPressureLoss_SBT.C2.b,singularPressureLoss_SBT.C1.a,SBT.TwoPhaseFlowPipe.C2.b,SBT.TwoPhaseFlowPipe.C1.a,SBT.ExchangerFlueGasesMetal.C2.b,SBT.ExchangerFlueGasesMetal.C1.a,RMT_RHT.TwoPhaseFlowPipe.C2.b,RMT_RHT.TwoPhaseFlowPipe.C1.a,RMT_RHT.ExchangerFlueGasesMetal.C2.b,RMT_RHT.ExchangerFlueGasesMetal.C1.a,puitsFumeesPTQXA1.C.a,Boiler_walls.TwoPhaseFlowPipe.C2.b,Boiler_walls.TwoPhaseFlowPipe.C1.a,Boiler_walls.ExchangerFlueGasesMetal.C2.b,Boiler_walls.ExchangerFlueGasesMetal.C1.a,splitter2_1.Cs2.b,splitter2_1.Cs1.b,splitter2_1.Ce.a,Wall_screen.C2.b,Wall_screen.C1.a,genericCombustion.Cws.a,genericCombustion.Cfg.b,genericCombustion.Ca.a,genericCombustion.Cfuel.a,controlValveIP.C2.b,controlValveIP.C1.a,controlValveHP.C2.b,controlValveHP.C1.a,sensorT.C2.b,sensorT.C1.a,splitter_Turbine_HP.Cs3.b,splitter_Turbine_HP.Cs2.b,splitter_Turbine_HP.Cs1.b,splitter_Turbine_HP.Ce.a,Turbine_HP1.Cs.b,Turbine_HP1.Ce.a,lumpedStraightPipe_HP_IP.C2.b,lumpedStraightPipe_HP_IP.C1.a,lumpedStraightPipe_HP.C2.b,lumpedStraightPipe_HP.C1.a,Desuperheater.Sc.b,Desuperheater.Sf.b,Desuperheater.Ef.a,Desuperheater.Ec.a,ReheaterHP1.Ev.a,ReheaterHP1.Sp.b,ReheaterHP1.Ep.a,ReheaterHP1.Se.b,ReheaterHP1.Ee.a,lumpedStraightPipe_HP1.C2.b,lumpedStraightPipe_HP1.C1.a,ReheaterHP2.Ev.a,ReheaterHP2.Sp.b,ReheaterHP2.Ep.a,ReheaterHP2.Se.b,ReheaterHP2.Ee.a,lumpedStraightPipe_Desu.C2.b,lumpedStraightPipe_Desu.C1.a,ReheaterHP3.Ev.a,ReheaterHP3.Sp.b,ReheaterHP3.Ep.a,ReheaterHP3.Se.b,ReheaterHP3.Ee.a,staticCentrifugalPump1.C2.b,staticCentrifugalPump1.C1.a,Drum_2.Cs3.b,Drum_2.Cs2.b,Drum_2.Cs1.b,Drum_2.Cs4.b,Drum_2.Ce1.a,Drum_2.Ce4.a,Drum_2.Ce3.a,Drum_2.Ce2.a,lumpedStraightPipe_IP1.C2.b,lumpedStraightPipe_IP1.C1.a,Drum_1.Cs3.b,Drum_1.Cs2.b,Drum_1.Cs1.b,Drum_1.Cs4.b,Drum_1.Ce1.a,Drum_1.Ce4.a,Drum_1.Ce3.a,Drum_1.Ce2.a,pipePressureLoss_LP3_Drum.C2.b,pipePressureLoss_LP3_Drum.C1.a,ReheaterIP.Ev.a,ReheaterIP.Sp.b,ReheaterIP.Ep.a,ReheaterIP.Se.b,ReheaterIP.Ee.a,ReheaterLP1.Ev.a,ReheaterLP1.Sp.b,ReheaterLP1.Ep.a,ReheaterLP1.Se.b,ReheaterLP1.Ee.a,ReheaterLP2.Ev.a,ReheaterLP2.Sp.b,ReheaterLP2.Ep.a,ReheaterLP2.Se.b,ReheaterLP2.Ee.a,ReheaterLP3.Ev.a,ReheaterLP3.Sp.b,ReheaterLP3.Ep.a,ReheaterLP3.Se.b,ReheaterLP3.Ee.a,ReDrum.Sc.b,ReDrum.Sf.b,ReDrum.Ef.a,ReDrum.Ec.a,staticCentrifugalPump.C2.b,staticCentrifugalPump.C1.a,Condenser.Cse.b,Condenser.Cee.a,Condenser.Cl.b,Condenser.Cv.a,lumpedStraightPipe_Condenser2.C2.b,lumpedStraightPipe_Condenser2.C1.a,SourceCaloporteur.C.b,PuitsCaloporteur.C.a,lumpedStraightPipe_LP3.C2.b,lumpedStraightPipe_LP3.C1.a,splitter_TurbineLP3.Cs2.b,splitter_TurbineLP3.Cs1.b,splitter_TurbineLP3.Ce2.a,splitter_TurbineLP3.Ce1.a,lumpedStraightPipe_LP2.C2.b,lumpedStraightPipe_LP2.C1.a,splitter_TurbineLP2.Cs2.b,splitter_TurbineLP2.Cs1.b,splitter_TurbineLP2.Ce2.a,splitter_TurbineLP2.Ce1.a,lumpedStraightPipe_LP1.C2.b,lumpedStraightPipe_LP1.C1.a,splitter_TurbineLP1.Cs2.b,splitter_TurbineLP1.Cs1.b,splitter_TurbineLP1.Ce2.a,splitter_TurbineLP1.Ce1.a,splitter_TurbineIP3.Cs2.b,splitter_TurbineIP3.Cs1.b,splitter_TurbineIP3.Ce2.a,splitter_TurbineIP3.Ce1.a,lumpedStraightPipe_IP3.C2.b,lumpedStraightPipe_IP3.C1.a,splitter_TurbineIP2.Cs2.b,splitter_TurbineIP2.Cs1.b,splitter_TurbineIP2.Ce2.a,splitter_TurbineIP2.Ce1.a,splitter_TurbineIP1.Cs2.b,splitter_TurbineIP1.Cs1.b,splitter_TurbineIP1.Ce2.a,splitter_TurbineIP1.Ce1.a,Echappement.Cs.b,Echappement.Ce.a,Turbine_LP3.Cs.b,Turbine_LP3.Ce.a,Turbine_IP3.Cs.b,Turbine_IP3.Ce.a,Turbine_LP1.Cs.b,Turbine_LP1.Ce.a,Turbine_IP1.Cs.b,Turbine_IP1.Ce.a,Turbine_LP2.Cs.b,Turbine_LP2.Ce.a,Turbine_IP2.Cs.b,Turbine_IP2.Ce.a,splitter_Turbine_HP1.Cs3.b,splitter_Turbine_HP1.Cs2.b,splitter_Turbine_HP1.Cs1.b,splitter_Turbine_HP1.Ce.a,Turbine_HP.Cs.b,Turbine_HP.Ce.a,volume_HP22.Cs2.a,volume_HP22.Ce2.b,volume_HP21.Cs2.a,volume_HP21.Ce2.b,volume_HP1Vap1.Ce2.b,volume_HP1Vap.Ce2.b,volume_HP3.Cs1.a,volume_HP2.Ce1.b,ReheaterHP1_1.Ep.b,volume_HP1.Cs1.a,splitter_condenser.Cs2.a,volumeA.Cs2.a,volumeA1.Ce2.b,AirPreheater.Cs2.a,AirPreheater.Ce2.b,splitter_Turbine_HP.Cs1.a,ReheaterHP1.Ep.b,Drum_2.Cs4.a,Drum_2.Cs3.a,Drum_2.Cs2.a,Drum_2.Ce3.b,Drum_1.Cs4.a,Drum_1.Cs3.a,Drum_1.Cs2.a,Drum_1.Ce4.b,Drum_1.Ce2.b,ReheaterIP.Ep.b,ReheaterLP3.Ep.b,splitter_TurbineLP3.Ce2.b,splitter_TurbineLP2.Ce2.b,splitter_TurbineLP1.Ce2.b,splitter_TurbineIP2.Ce2.b,splitter_TurbineIP1.Ce2.b)
 * Number of discrete states: 0 ()
 * Number of clocked states: 0 ()
 * Top-level inputs: 0
Notification: Strong component statistics for initialization (1049):
 * Single equations (assignments): 971
 * Array equations: 0
 * Algorithm blocks: 2
 * Record equations: 62
 * When equations: 0
 * If-equations: 0
 * Equation systems (not torn): 3
 * Torn equation systems: 11
 * Mixed (continuous/discrete) equation systems: 0
Notification: Equation system details (not torn):
 * Constant Jacobian (size): 0 systems
 * Linear Jacobian (size,density): 1 system
   {(2,100.0%)}
 * Non-linear Jacobian (size): 2 systems
   {1, 1}
 * Without analytic Jacobian (size): 0 systems
Notification: Torn system details for strict tearing set:
 * Linear torn systems (#iteration vars, #inner vars, density): 2 systems
   {(4,1,62.5%), (1,1,100.0%)}
 * Non-linear torn systems (#iteration vars, #inner vars): 9 systems
   {(1,3), (1,4), (1,3), (1,3), (1,3), (294,1675), (1,1), (9,3), (1,1)}
Notification: Performance of prepare postOptimizeDAE: time 0.01904/8.123, allocations: 5.551 MB / 3.417 GB, free: 385.9 MB / 0.9481 GB
Notification: Performance of postOpt lateInlineFunction (simulation): time 0.005998/8.129, allocations: 2.282 MB / 3.419 GB, free: 385 MB / 0.9481 GB
Notification: Performance of postOpt wrapFunctionCalls (simulation): time 0.1535/8.283, allocations: 102.1 MB / 3.518 GB, free: 301.6 MB / 0.9481 GB
Notification: Performance of postOpt inlineArrayEqn (simulation): time 0.161/8.444, allocations: 87.48 MB / 3.604 GB, free: 220.4 MB / 0.9481 GB
Notification: Performance of postOpt constantLinearSystem (simulation): time 0.0001509/8.444, allocations: 16 kB / 3.604 GB, free: 220.4 MB / 0.9481 GB
Notification: Performance of postOpt simplifysemiLinear (simulation): time 0.0007426/8.444, allocations: 203.2 kB / 3.604 GB, free: 220.2 MB / 0.9481 GB
Warning: The model contains alias variables with redundant start and/or conflicting nominal values. It is recommended to resolve the conflicts, because otherwise the system could be hard to solve. To print the conflicting alias sets and the chosen candidates please use -d=aliasConflicts.
Notification: Performance of postOpt removeSimpleEquations (simulation): time 0.2855/8.73, allocations: 153.5 MB / 3.754 GB, free: 69.57 MB / 0.9481 GB
Notification: Performance of postOpt simplifyComplexFunction (simulation): time 0.0006571/8.731, allocations: 31.97 kB / 3.754 GB, free: 69.54 MB / 0.9481 GB
Notification: Performance of postOpt solveSimpleEquations (simulation): time 0.02764/8.758, allocations: 8.66 MB / 3.763 GB, free: 60.86 MB / 0.9481 GB
Notification: Performance of postOpt tearingSystem (simulation): time 0.3658/9.124, allocations: 66.9 MB / 3.828 GB, free: 447.5 MB / 0.9481 GB
Notification: Performance of postOpt inputDerivativesUsed (simulation): time 0.0114/9.135, allocations: 1.155 MB / 3.829 GB, free: 447.5 MB / 0.9481 GB
Notification: Performance of postOpt calculateStrongComponentJacobians (simulation): time 0.1245/9.26, allocations: 166.8 MB / 3.992 GB, free: 317.8 MB / 0.9481 GB
Notification: Performance of postOpt calculateStateSetsJacobians (simulation): time 3.657e-06/9.26, allocations: 7.969 kB / 3.992 GB, free: 317.8 MB / 0.9481 GB
Notification: Performance of postOpt symbolicJacobian (simulation): time 0.2313/9.491, allocations: 130.7 MB / 4.12 GB, free: 195.7 MB / 0.9481 GB
Notification: Performance of postOpt removeConstants (simulation): time 0.02395/9.515, allocations: 7.249 MB / 4.127 GB, free: 189.3 MB / 0.9481 GB
Notification: Performance of postOpt simplifyTimeIndepFuncCalls (simulation): time 0.01189/9.527, allocations: 0.7848 MB / 4.127 GB, free: 188.6 MB / 0.9481 GB
Notification: Performance of postOpt simplifyAllExpressions (simulation): time 0.02571/9.553, allocations: 2.863 MB / 4.13 GB, free: 185.8 MB / 0.9481 GB
Notification: Performance of postOpt findZeroCrossings (simulation): time 0.00965/9.562, allocations: 2.835 MB / 4.133 GB, free: 182.9 MB / 0.9481 GB
Notification: Performance of postOpt collapseArrayExpressions (simulation): time 0.004122/9.567, allocations: 1.308 MB / 4.134 GB, free: 181.6 MB / 0.9481 GB
Notification: Performance of sorting global known variables: time 0.004957/9.572, allocations: 4.192 MB / 4.138 GB, free: 177.5 MB / 0.9481 GB
Notification: Performance of sort global known variables: time 1.81e-07/9.572, allocations: 0 / 4.138 GB, free: 177.5 MB / 0.9481 GB
Notification: Performance of remove unused functions: time 0.03658/9.608, allocations: 11.22 MB / 4.149 GB, free: 166.6 MB / 0.9481 GB
Notification: Model statistics after passing the back-end for simulation:
 * Number of independent subsystems: 8
 * Number of states: 152 (splitter_Turbine_HP1.P,splitter_Turbine_HP1.h,splitter_TurbineIP1.h,splitter_TurbineIP2.P,splitter_TurbineIP2.h,splitter_TurbineIP3.h,splitter_TurbineLP1.h,splitter_TurbineLP2.h,splitter_TurbineLP3.h,Condenser.P,Condenser.hl,Condenser.hv,Condenser.Vv,Drum_1.h,Drum_2.h,splitter_Turbine_HP.P,splitter_Turbine_HP.h,Wall_screen.P[2],Wall_screen.P[3],Wall_screen.P[4],Wall_screen.P[5],Wall_screen.P[6],Wall_screen.P[7],Wall_screen.P[8],Wall_screen.Q[1],Wall_screen.Q[2],Wall_screen.Q[3],Wall_screen.Q[4],Wall_screen.Q[5],Wall_screen.Q[6],Wall_screen.Q[7],Wall_screen.h[2],Wall_screen.h[3],Wall_screen.h[4],Wall_screen.h[5],Wall_screen.h[6],Wall_screen.h[7],Wall_screen.h[8],heatExchangerWall.Tp[1],heatExchangerWall.Tp[2],heatExchangerWall.Tp[3],heatExchangerWall.Tp[4],heatExchangerWall.Tp[5],heatExchangerWall.Tp[6],heatExchangerWall.Tp[7],Boiler_walls.ExchangerWall.Tp[1],Boiler_walls.ExchangerWall.Tp[2],Boiler_walls.ExchangerWall.Tp[3],Boiler_walls.TwoPhaseFlowPipe.P[2],Boiler_walls.TwoPhaseFlowPipe.P[3],Boiler_walls.TwoPhaseFlowPipe.P[4],Boiler_walls.TwoPhaseFlowPipe.Q[1],Boiler_walls.TwoPhaseFlowPipe.Q[2],Boiler_walls.TwoPhaseFlowPipe.Q[3],Boiler_walls.TwoPhaseFlowPipe.h[2],Boiler_walls.TwoPhaseFlowPipe.h[3],Boiler_walls.TwoPhaseFlowPipe.h[4],RMT_RHT.ExchangerWall.Tp[1],RMT_RHT.ExchangerWall.Tp[2],RMT_RHT.ExchangerWall.Tp[3],RMT_RHT.TwoPhaseFlowPipe.P[2],RMT_RHT.TwoPhaseFlowPipe.P[3],RMT_RHT.TwoPhaseFlowPipe.P[4],RMT_RHT.TwoPhaseFlowPipe.Q[2],RMT_RHT.TwoPhaseFlowPipe.Q[3],RMT_RHT.TwoPhaseFlowPipe.Q[4],RMT_RHT.TwoPhaseFlowPipe.h[2],RMT_RHT.TwoPhaseFlowPipe.h[3],RMT_RHT.TwoPhaseFlowPipe.h[4],SBT.ExchangerWall.Tp[1],SBT.ExchangerWall.Tp[2],SBT.ExchangerWall.Tp[3],SBT.TwoPhaseFlowPipe.P[2],SBT.TwoPhaseFlowPipe.P[3],SBT.TwoPhaseFlowPipe.P[4],SBT.TwoPhaseFlowPipe.Q[1],SBT.TwoPhaseFlowPipe.Q[2],SBT.TwoPhaseFlowPipe.Q[3],SBT.TwoPhaseFlowPipe.Q[4],SBT.TwoPhaseFlowPipe.h[2],SBT.TwoPhaseFlowPipe.h[3],SBT.TwoPhaseFlowPipe.h[4],RBT.ExchangerWall.Tp[1],RBT.ExchangerWall.Tp[2],RBT.ExchangerWall.Tp[3],RBT.TwoPhaseFlowPipe.P[2],RBT.TwoPhaseFlowPipe.P[3],RBT.TwoPhaseFlowPipe.P[4],RBT.TwoPhaseFlowPipe.Q[1],RBT.TwoPhaseFlowPipe.Q[2],RBT.TwoPhaseFlowPipe.Q[3],RBT.TwoPhaseFlowPipe.Q[4],RBT.TwoPhaseFlowPipe.h[2],RBT.TwoPhaseFlowPipe.h[3],RBT.TwoPhaseFlowPipe.h[4],Economiseur.ExchangerWall.Tp[1],Economiseur.ExchangerWall.Tp[2],Economiseur.ExchangerWall.Tp[3],Economiseur.TwoPhaseFlowPipe.P[2],Economiseur.TwoPhaseFlowPipe.P[3],Economiseur.TwoPhaseFlowPipe.P[4],Economiseur.TwoPhaseFlowPipe.Q[1],Economiseur.TwoPhaseFlowPipe.Q[2],Economiseur.TwoPhaseFlowPipe.Q[3],Economiseur.TwoPhaseFlowPipe.Q[4],Economiseur.TwoPhaseFlowPipe.h[2],Economiseur.TwoPhaseFlowPipe.h[3],Economiseur.TwoPhaseFlowPipe.h[4],SMT_SHT.ExchangerWall.Tp[1],SMT_SHT.ExchangerWall.Tp[2],SMT_SHT.ExchangerWall.Tp[3],SMT_SHT.TwoPhaseFlowPipe.P[2],SMT_SHT.TwoPhaseFlowPipe.P[3],SMT_SHT.TwoPhaseFlowPipe.P[4],SMT_SHT.TwoPhaseFlowPipe.Q[1],SMT_SHT.TwoPhaseFlowPipe.Q[2],SMT_SHT.TwoPhaseFlowPipe.Q[3],SMT_SHT.TwoPhaseFlowPipe.Q[4],SMT_SHT.TwoPhaseFlowPipe.h[2],SMT_SHT.TwoPhaseFlowPipe.h[3],SMT_SHT.TwoPhaseFlowPipe.h[4],AirPreheater.Xh2o,volumeA1.h,volumeA.P,volumeA.h,TemperatureControl.pIsat.Integrateur1.x,TemperatureControl.pT1_1.x,regulation_Level_Condenser.pIsat.Integrateur1.x,regulation_Level_Condenser.pIsat1.Integrateur1.x,regulation_Level_Condenser.pT1_1.x,regulation_Level_Condenser.pT1_2.x,regulation_Level_Condenser.pT1_3.x,splitter_condenser.h,Pump_VelocityControl.pIsat.Integrateur1.x,Pump_VelocityControl.pT1_1.x,pT1_1.x,volume_HP1.P,volume_HP1.h,volume_HP2.P,volume_HP2.h,volume_HP3.h,volume_HP1Vap.P,volume_HP1Vap.h,volume_HP1Vap1.P,volume_HP1Vap1.h,volume_HP21.P,volume_HP21.h,volume_HP22.P,volume_HP22.h,pT1_3.x,pT1_4.x,pT1_5.x)
 * Number of discrete variables: 13 ($whenCondition3,$whenCondition2,$whenCondition1,TemperatureControl.pIsat.Integrateur1.x0,regulation_Level_Condenser.pIsat.Integrateur1.x0,regulation_Level_Condenser.pIsat1.Integrateur1.x0,regulation_Level_Condenser.edge.uL.signal,regulation_Level_Condenser.edge.yL.signal,regulation_Level_Condenser.echelon.yL.signal,CheckValve.ouvert,CheckValve.touvert,CheckValve.tferme,Pump_VelocityControl.pIsat.Integrateur1.x0)
 * Number of discrete states: 5 (CheckValve.touvert,CheckValve.tferme,regulation_Level_Condenser.echelon.yL.signal,regulation_Level_Condenser.edge.yL.signal,regulation_Level_Condenser.edge.uL.signal)
 * Number of clocked states: 0 ()
 * Top-level inputs: 0
Notification: Strong component statistics for simulation (3203):
 * Single equations (assignments): 2917
 * Array equations: 0
 * Algorithm blocks: 2
 * Record equations: 168
 * When equations: 5
 * If-equations: 0
 * Equation systems (not torn): 10
 * Torn equation systems: 101
 * Mixed (continuous/discrete) equation systems: 0
Notification: Equation system details (not torn):
 * Constant Jacobian (size): 0 systems
 * Linear Jacobian (size,density): 10 systems
   {(2,100.0%), (2,100.0%), (2,100.0%), (2,100.0%), (2,100.0%), (2,100.0%), (2,100.0%), (2,100.0%), (2,100.0%), (2,100.0%)}
 * Non-linear Jacobian (size): 0 systems
 * Without analytic Jacobian (size): 0 systems
Notification: Torn system details for strict tearing set:
 * Linear torn systems (#iteration vars, #inner vars, density): 42 systems
   {(4,1,62.5%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (2,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (2,1,100.0%)}
 * Non-linear torn systems (#iteration vars, #inner vars): 59 systems
   {(1,2), (1,2), (1,2), (1,2), (1,2), (1,2), (1,4), (1,2), (1,2), (1,2), (1,2), (1,3), (1,5), (1,3), (1,2), (1,2), (1,2), (1,2), (1,3), (1,1), (93,233), (1,6), (3,7), (1,2), (1,2), (1,3), (1,6), (1,6), (1,6), (1,6), (1,34), (1,6), (1,6), (1,6), (1,6), (1,6), (1,3), (1,6), (1,6), (1,6), (2,37), (1,6), (1,6), (1,6), (1,6), (1,6), (1,5), (1,3), (52,195), (23,52), (1,3), (1,26), (1,2), (1,2), (1,1), (1,5), (1,5), (1,3), (23,52)}
Notification: Performance of Backend phase and start with SimCode phase: time 0.2138/9.822, allocations: 136.1 MB / 4.282 GB, free: 31.33 MB / 0.9481 GB
Notification: Performance of simCode: created initialization part: time 0.3891/10.21, allocations: 113.8 MB / 4.393 GB, free: 406.9 MB / 0.9481 GB
Notification: Performance of simCode: created event and clocks part: time 1.202e-05/10.21, allocations: 4.453 kB / 4.393 GB, free: 406.9 MB / 0.9481 GB
Notification: Performance of simCode: created simulation system equations: time 0.08082/10.29, allocations: 48.66 MB / 4.441 GB, free: 384.5 MB / 0.9481 GB
Notification: Performance of simCode: created of all other equations (e.g. parameter, nominal, assert, etc): time 0.05586/10.35, allocations: 13.91 MB / 4.454 GB, free: 374.7 MB / 0.9481 GB
Notification: Performance of simCode: created linear, non-linear and system jacobian parts: time 1.132/11.48, allocations: 388.2 MB / 4.833 GB, free: 412.6 MB / 0.9481 GB
Notification: Performance of simCode: some other stuff during SimCode phase: time 0.01587/11.5, allocations: 17.29 MB / 4.85 GB, free: 410.9 MB / 0.9481 GB
Notification: Performance of simCode: alias equations: time 0.0159/11.51, allocations: 4.754 MB / 4.855 GB, free: 410.8 MB / 0.9481 GB
Notification: Performance of simCode: all other stuff during SimCode phase: time 0.01405/11.53, allocations: 16.89 MB / 4.871 GB, free: 405.6 MB / 0.9481 GB
Notification: Performance of SimCode: time 1.904e-06/11.53, allocations: 0 / 4.871 GB, free: 405.6 MB / 0.9481 GB
Notification: Performance of buildModelFMU: Generate the FMI files: time 2.285/13.81, allocations: 1.273 GB / 6.144 GB, free: 288.8 MB / 0.9484 GB
Error: Error building simulator. Build log: cmd: cd '431.fmutmp/sources/' && mkdir build_cmake_static && cd build_cmake_static && cmake -DCMAKE_BUILD_TYPE=Release -DCMAKE_C_COMPILER='clang' .. && cmake --build . --parallel -j1 --target install && cd .. && rm -rf build_cmake_static
-- The C compiler identification is Clang 18.1.3
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/clang - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- FMI2 include directory: /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/fmi
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD - Success
-- Found Threads: TRUE  
-- Building for FMI platform linux64
-- Install directory: /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/../binaries/linux64
-- CVODE: Not linked
-- Not using FMI2_FUNCTION_PREFIX
-- Installing dynamic dependencies from list: 
-- Configuring done (0.2s)
-- Generating done (0.0s)
-- Build files have been written to: /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/build_cmake_static
[  0%] Building C object CMakeFiles/431.dir/external_solvers/F77_aloc.c.o
[  1%] Building C object CMakeFiles/431.dir/external_solvers/dgemm.c.o
[  2%] Building C object CMakeFiles/431.dir/external_solvers/dgemv.c.o
[  3%] Building C object CMakeFiles/431.dir/external_solvers/dger.c.o
[  4%] Building C object CMakeFiles/431.dir/external_solvers/dgesv.c.o
[  4%] Building C object CMakeFiles/431.dir/external_solvers/dgetf2.c.o
[  5%] Building C object CMakeFiles/431.dir/external_solvers/dgetrf.c.o
[  6%] Building C object CMakeFiles/431.dir/external_solvers/dgetri.c.o
[  7%] Building C object CMakeFiles/431.dir/external_solvers/dgetrs.c.o
[  8%] Building C object CMakeFiles/431.dir/external_solvers/dlamch.c.o
[  8%] Building C object CMakeFiles/431.dir/external_solvers/dlaswp.c.o
[  9%] Building C object CMakeFiles/431.dir/external_solvers/dogleg_.c.o
[ 10%] Building C object CMakeFiles/431.dir/external_solvers/dpmpar_.c.o
[ 11%] Building C object CMakeFiles/431.dir/external_solvers/dscal.c.o
[ 12%] Building C object CMakeFiles/431.dir/external_solvers/dswap.c.o
[ 12%] Building C object CMakeFiles/431.dir/external_solvers/dtrmm.c.o
[ 13%] Building C object CMakeFiles/431.dir/external_solvers/dtrmv.c.o
[ 14%] Building C object CMakeFiles/431.dir/external_solvers/dtrsm.c.o
[ 15%] Building C object CMakeFiles/431.dir/external_solvers/dtrti2.c.o
[ 16%] Building C object CMakeFiles/431.dir/external_solvers/dtrtri.c.o
[ 16%] Building C object CMakeFiles/431.dir/external_solvers/enorm_.c.o
[ 17%] Building C object CMakeFiles/431.dir/external_solvers/exit_.c.o
[ 18%] Building C object CMakeFiles/431.dir/external_solvers/hybrj_.c.o
[ 19%] Building C object CMakeFiles/431.dir/external_solvers/i_nint.c.o
[ 20%] Building C object CMakeFiles/431.dir/external_solvers/idamax.c.o
[ 20%] Building C object CMakeFiles/431.dir/external_solvers/ieeeck.c.o
[ 21%] Building C object CMakeFiles/431.dir/external_solvers/ilaenv.c.o
[ 22%] Building C object CMakeFiles/431.dir/external_solvers/iparmq.c.o
[ 23%] Building C object CMakeFiles/431.dir/external_solvers/lsame.c.o
[ 24%] Building C object CMakeFiles/431.dir/external_solvers/pow_di.c.o
[ 25%] Building C object CMakeFiles/431.dir/external_solvers/qform_.c.o
[ 25%] Building C object CMakeFiles/431.dir/external_solvers/qrfac_.c.o
[ 26%] Building C object CMakeFiles/431.dir/external_solvers/r1mpyq_.c.o
[ 27%] Building C object CMakeFiles/431.dir/external_solvers/r1updt_.c.o
[ 28%] Building C object CMakeFiles/431.dir/external_solvers/s_cat.c.o
[ 29%] Building C object CMakeFiles/431.dir/external_solvers/s_cmp.c.o
[ 29%] Building C object CMakeFiles/431.dir/external_solvers/s_copy.c.o
[ 30%] Building C object CMakeFiles/431.dir/external_solvers/xerbla.c.o
[ 31%] Building C object CMakeFiles/431.dir/fmi-export/fmu2_model_interface.c.o
[ 32%] Building C object CMakeFiles/431.dir/fmi-export/fmu_read_flags.c.o
[ 33%] Building C object CMakeFiles/431.dir/gc/memory_pool.c.o
[ 33%] Building C object CMakeFiles/431.dir/gc/omc_gc.c.o
[ 34%] Building C object CMakeFiles/431.dir/math-support/pivot.c.o
[ 35%] Building C object CMakeFiles/431.dir/meta/meta_modelica_catch.c.o
[ 36%] Building C object CMakeFiles/431.dir/simulation/arrayIndex.c.o
[ 37%] Building C object CMakeFiles/431.dir/simulation/eval_dep.c.o
[ 37%] Building C object CMakeFiles/431.dir/simulation/jacobian_util.c.o
[ 38%] Building C object CMakeFiles/431.dir/simulation/omc_simulation_util.c.o
[ 39%] Building C object CMakeFiles/431.dir/simulation/options.c.o
[ 40%] Building C object CMakeFiles/431.dir/simulation/simulation_info_json.c.o
[ 41%] Building C object CMakeFiles/431.dir/simulation/simulation_omc_assert.c.o
[ 41%] Building C object CMakeFiles/431.dir/simulation/solver/delay.c.o
[ 42%] Building C object CMakeFiles/431.dir/simulation/solver/discrete_changes.c.o
[ 43%] Building C object CMakeFiles/431.dir/simulation/solver/initialization/initialization.c.o
[ 44%] Building C object CMakeFiles/431.dir/simulation/solver/linearSolverLapack.c.o
[ 45%] Building C object CMakeFiles/431.dir/simulation/solver/linearSolverTotalPivot.c.o
[ 45%] Building C object CMakeFiles/431.dir/simulation/solver/linearSystem.c.o
[ 46%] Building C object CMakeFiles/431.dir/simulation/solver/model_help.c.o
[ 47%] Building C object CMakeFiles/431.dir/simulation/solver/nonlinearSolverHomotopy.c.o
[ 48%] Building C object CMakeFiles/431.dir/simulation/solver/nonlinearSolverHybrd.c.o
[ 49%] Building C object CMakeFiles/431.dir/simulation/solver/nonlinearSystem.c.o
[ 50%] Building C object CMakeFiles/431.dir/simulation/solver/nonlinearValuesList.c.o
[ 50%] Building C object CMakeFiles/431.dir/simulation/solver/omc_math.c.o
[ 51%] Building C object CMakeFiles/431.dir/simulation/solver/spatialDistribution.c.o
[ 52%] Building C object CMakeFiles/431.dir/simulation/solver/stateset.c.o
[ 53%] Building C object CMakeFiles/431.dir/simulation/solver/synchronous.c.o
[ 54%] Building C object CMakeFiles/431.dir/util/ModelicaUtilities.c.o
[ 54%] Building C object CMakeFiles/431.dir/util/base_array.c.o
[ 55%] Building C object CMakeFiles/431.dir/util/boolean_array.c.o
[ 56%] Building C object CMakeFiles/431.dir/util/context.c.o
[ 57%] Building C object CMakeFiles/431.dir/util/division.c.o
[ 58%] Building C object CMakeFiles/431.dir/util/doubleEndedList.c.o
[ 58%] Building C object CMakeFiles/431.dir/util/generic_array.c.o
[ 59%] Building C object CMakeFiles/431.dir/util/index_spec.c.o
[ 60%] Building C object CMakeFiles/431.dir/util/integer_array.c.o
[ 61%] Building C object CMakeFiles/431.dir/util/list.c.o
[ 62%] Building C object CMakeFiles/431.dir/util/modelica_string.c.o
[ 62%] Building C object CMakeFiles/431.dir/util/modelica_string_lit.c.o
[ 63%] Building C object CMakeFiles/431.dir/util/omc_error.c.o
[ 64%] Building C object CMakeFiles/431.dir/util/omc_file.c.o
[ 65%] Building C object CMakeFiles/431.dir/util/omc_init.c.o
[ 66%] Building C object CMakeFiles/431.dir/util/omc_mmap.c.o
[ 66%] Building C object CMakeFiles/431.dir/util/omc_msvc.c.o
[ 67%] Building C object CMakeFiles/431.dir/util/omc_numbers.c.o
[ 68%] Building C object CMakeFiles/431.dir/util/parallel_helper.c.o
[ 69%] Building C object CMakeFiles/431.dir/util/rational.c.o
[ 70%] Building C object CMakeFiles/431.dir/util/real_array.c.o
[ 70%] Building C object CMakeFiles/431.dir/util/ringbuffer.c.o
[ 71%] Building C object CMakeFiles/431.dir/util/simulation_options.c.o
[ 72%] Building C object CMakeFiles/431.dir/util/string_array.c.o
[ 73%] Building C object CMakeFiles/431.dir/util/utility.c.o
[ 74%] Building C object CMakeFiles/431.dir/util/varinfo.c.o
[ 75%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant.c.o
[ 75%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_01exo.c.o
[ 76%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_02nls.c.o
[ 77%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_02nls_part0.c.o
[ 78%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_02nls_part1.c.o
[ 79%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_03lsy.c.o
[ 79%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_04set.c.o
[ 80%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_05evt.c.o
[ 81%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_06inz.c.o
[ 82%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_06inz_part2.c.o
[ 83%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_06inz_part3.c.o
[ 83%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_06inz_part4.c.o
[ 84%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_07dly.c.o
[ 85%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_08bnd.c.o
[ 86%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_08bnd_part5.c.o
[ 87%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_08bnd_part6.c.o
[ 87%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_08bnd_part7.c.o
[ 88%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_09alg.c.o
[ 89%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_10asr.c.o
[ 90%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_11mix.c.o
[ 91%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_12jac.c.o
[ 91%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_13opt.c.o
[ 92%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_14lnz.c.o
[ 93%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_15syn.c.o
[ 94%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_16dae.c.o
[ 95%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_17inl.c.o
[ 95%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_18spd.c.o
[ 96%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_FMU.c.o
[ 97%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c.o
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:237:331: error: invalid operands to binary expression ('modelica_real' (aka 'double') and 'real_array' (aka 'struct base_array_s'))
  237 |   __omcQ_24ThermoSysPro_24PProperties_24PFlueGases_24PFlueGases_5Fh_24funDERh = (__omcQ_24ThermoSysPro_24PProperties_24PFlueGases_24PFlueGases_5Fh_24funDERstate._T) * (omc__omcQ_24DER_24ThermoSysPro_24PProperties_24PModelicaMediaFlueGases_24Ph_5F_5FTX(threadData, _state._T, _state._X, 1 /* true */, 1, 0.0, 1.0, _OMC_LIT8, 0.0)) + mul_alloc_real_array_scalar(__omcQ_24ThermoSysPro_24PProperties_24PFlueGases_24PFlueGases_5Fh_24funDERstate._X, omc__omcQ_24DER_24ThermoSysPro_24PProperties_24PModelicaMediaFlueGases_24Ph_5F_5FTX(threadData, _state._T, _state._X, 1 /* true */, 1, 0.0, 0.0, _OMC_LIT9, 0.0)) + (__omcQ_24ThermoSysPro_24PProperties_24PFlueGases_24PFlueGases_5Fh_24funDERXh2o) * (_Hlat) - (mul_alloc_real_array_scalar(__omcQ_24ThermoSysPro_24PProperties_24PFlueGases_24PFlueGases_5Fh_24funDERstate0._X, omc__omcQ_24DER_24ThermoSysPro_24PProperties_24PModelicaMediaFlueGases_24Ph_5F_5FTX(threadData, _state0._T, _state0._X, 1 /* true */, 1, 0.0, 0.0, _OMC_LIT9, 0.0))) - ((__omcQ_24ThermoSysPro_24PProperties_24PFlueGases_24PFlueGases_5Fh_24funDERstate0._T) * (omc__omcQ_24DER_24ThermoSysPro_24PProperties_24PModelicaMediaFlueGases_24Ph_5F_5FTX(threadData, _state0._T, _state0._X, 1 /* true */, 1, 0.0, 1.0, _OMC_LIT8, 0.0)));
      |                                                                                 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1100:31: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
 1100 |     if((_option_interpolation == ((modelica_integer) 1)))
      |         ~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1100:31: note: remove extraneous parentheses around the comparison to silence this warning
 1100 |     if((_option_interpolation == ((modelica_integer) 1)))
      |        ~                      ^                        ~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1100:31: note: use '=' to turn this equality comparison into an assignment
 1100 |     if((_option_interpolation == ((modelica_integer) 1)))
      |                               ^~
      |                               =
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1106:33: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
 1106 |       if((_option_interpolation == ((modelica_integer) 2)))
      |           ~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1106:33: note: remove extraneous parentheses around the comparison to silence this warning
 1106 |       if((_option_interpolation == ((modelica_integer) 2)))
      |          ~                      ^                        ~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1106:33: note: use '=' to turn this equality comparison into an assignment
 1106 |       if((_option_interpolation == ((modelica_integer) 2)))
      |                                 ^~
      |                                 =
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1315:29: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
 1315 |   if((_option_interpolation == ((modelica_integer) 1)))
      |       ~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1315:29: note: remove extraneous parentheses around the comparison to silence this warning
 1315 |   if((_option_interpolation == ((modelica_integer) 1)))
      |      ~                      ^                        ~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1315:29: note: use '=' to turn this equality comparison into an assignment
 1315 |   if((_option_interpolation == ((modelica_integer) 1)))
      |                             ^~
      |                             =
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1321:31: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
 1321 |     if((_option_interpolation == ((modelica_integer) 2)))
      |         ~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1321:31: note: remove extraneous parentheses around the comparison to silence this warning
 1321 |     if((_option_interpolation == ((modelica_integer) 2)))
      |        ~                      ^                        ~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1321:31: note: use '=' to turn this equality comparison into an assignment
 1321 |     if((_option_interpolation == ((modelica_integer) 2)))
      |                               ^~
      |                               =
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1527:31: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
 1527 |     if((_option_interpolation == ((modelica_integer) 1)))
      |         ~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1527:31: note: remove extraneous parentheses around the comparison to silence this warning
 1527 |     if((_option_interpolation == ((modelica_integer) 1)))
      |        ~                      ^                        ~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1527:31: note: use '=' to turn this equality comparison into an assignment
 1527 |     if((_option_interpolation == ((modelica_integer) 1)))
      |                               ^~
      |                               =
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1533:33: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
 1533 |       if((_option_interpolation == ((modelica_integer) 2)))
      |           ~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1533:33: note: remove extraneous parentheses around the comparison to silence this warning
 1533 |       if((_option_interpolation == ((modelica_integer) 2)))
      |          ~                      ^                        ~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1533:33: note: use '=' to turn this equality comparison into an assignment
 1533 |       if((_option_interpolation == ((modelica_integer) 2)))
      |                                 ^~
      |                                 =
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1553:31: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
 1553 |     if((_option_interpolation == ((modelica_integer) 1)))
      |         ~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1553:31: note: remove extraneous parentheses around the comparison to silence this warning
 1553 |     if((_option_interpolation == ((modelica_integer) 1)))
      |        ~                      ^                        ~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1553:31: note: use '=' to turn this equality comparison into an assignment
 1553 |     if((_option_interpolation == ((modelica_integer) 1)))
      |                               ^~
      |                               =
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1559:33: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
 1559 |       if((_option_interpolation == ((modelica_integer) 2)))
      |           ~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1559:33: note: remove extraneous parentheses around the comparison to silence this warning
 1559 |       if((_option_interpolation == ((modelica_integer) 2)))
      |          ~                      ^                        ~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1559:33: note: use '=' to turn this equality comparison into an assignment
 1559 |       if((_option_interpolation == ((modelica_integer) 2)))
      |                                 ^~
      |                                 =
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1740:15: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
 1740 |     if((_IndX == _dimX))
      |         ~~~~~~^~~~~~~~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1740:15: note: remove extraneous parentheses around the comparison to silence this warning
 1740 |     if((_IndX == _dimX))
      |        ~      ^       ~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1740:15: note: use '=' to turn this equality comparison into an assignment
 1740 |     if((_IndX == _dimX))
      |               ^~
      |               =
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1751:15: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
 1751 |     if((_IndX == ((modelica_integer) 2)))
      |         ~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1751:15: note: remove extraneous parentheses around the comparison to silence this warning
 1751 |     if((_IndX == ((modelica_integer) 2)))
      |        ~      ^                        ~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1751:15: note: use '=' to turn this equality comparison into an assignment
 1751 |     if((_IndX == ((modelica_integer) 2)))
      |               ^~
      |               =
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3345:14: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
 3345 |   if((_fluid == ((modelica_integer) 1)))
      |       ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3345:14: note: remove extraneous parentheses around the comparison to silence this warning
 3345 |   if((_fluid == ((modelica_integer) 1)))
      |      ~       ^                        ~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3345:14: note: use '=' to turn this equality comparison into an assignment
 3345 |   if((_fluid == ((modelica_integer) 1)))
      |              ^~
      |              =
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3352:16: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
 3352 |     if((_fluid == ((modelica_integer) 2)))
      |         ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3352:16: note: remove extraneous parentheses around the comparison to silence this warning
 3352 |     if((_fluid == ((modelica_integer) 2)))
      |        ~       ^                        ~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3352:16: note: use '=' to turn this equality comparison into an assignment
 3352 |     if((_fluid == ((modelica_integer) 2)))
      |                ^~
      |                =
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3359:18: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
 3359 |       if((_fluid == ((modelica_integer) 7)))
      |           ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3359:18: note: remove extraneous parentheses around the comparison to silence this warning
 3359 |       if((_fluid == ((modelica_integer) 7)))
      |          ~       ^                        ~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3359:18: note: use '=' to turn this equality comparison into an assignment
 3359 |       if((_fluid == ((modelica_integer) 7)))
      |                  ^~
      |                  =
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3428:14: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
 3428 |   if((_fluid == ((modelica_integer) 1)))
      |       ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3428:14: note: remove extraneous parentheses around the comparison to silence this warning
 3428 |   if((_fluid == ((modelica_integer) 1)))
      |      ~       ^                        ~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3428:14: note: use '=' to turn this equality comparison into an assignment
 3428 |   if((_fluid == ((modelica_integer) 1)))
      |              ^~
      |              =
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3435:16: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
 3435 |     if((_fluid == ((modelica_integer) 2)))
      |         ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3435:16: note: remove extraneous parentheses around the comparison to silence this warning
 3435 |     if((_fluid == ((modelica_integer) 2)))
      |        ~       ^                        ~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3435:16: note: use '=' to turn this equality comparison into an assignment
 3435 |     if((_fluid == ((modelica_integer) 2)))
      |                ^~
      |                =
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3442:18: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
 3442 |       if((_fluid == ((modelica_integer) 7)))
      |           ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3442:18: note: remove extraneous parentheses around the comparison to silence this warning
 3442 |       if((_fluid == ((modelica_integer) 7)))
      |          ~       ^                        ~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3442:18: note: use '=' to turn this equality comparison into an assignment
 3442 |       if((_fluid == ((modelica_integer) 7)))
      |                  ^~
      |                  =
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:35891:16: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
 35891 |     if((_phase == ((modelica_integer) 2)))
       |         ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:35891:16: note: remove extraneous parentheses around the comparison to silence this warning
 35891 |     if((_phase == ((modelica_integer) 2)))
       |        ~       ^                        ~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:35891:16: note: use '=' to turn this equality comparison into an assignment
 35891 |     if((_phase == ((modelica_integer) 2)))
       |                ^~
       |                =
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:35909:24: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
 35909 |             if((_phase == ((modelica_integer) 1)))
       |                 ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:35909:24: note: remove extraneous parentheses around the comparison to silence this warning
 35909 |             if((_phase == ((modelica_integer) 1)))
       |                ~       ^                        ~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:35909:24: note: use '=' to turn this equality comparison into an assignment
 35909 |             if((_phase == ((modelica_integer) 1)))
       |                        ^~
       |                        =
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:35940:26: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
 35940 |               if((_phase == ((modelica_integer) 1)))
       |                   ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:35940:26: note: remove extraneous parentheses around the comparison to silence this warning
 35940 |               if((_phase == ((modelica_integer) 1)))
       |                  ~       ^                        ~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:35940:26: note: use '=' to turn this equality comparison into an assignment
 35940 |               if((_phase == ((modelica_integer) 1)))
       |                          ^~
       |                          =
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39402:15: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
 39402 |   if((_region == ((modelica_integer) 1)))
       |       ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39402:15: note: remove extraneous parentheses around the comparison to silence this warning
 39402 |   if((_region == ((modelica_integer) 1)))
       |      ~        ^                        ~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39402:15: note: use '=' to turn this equality comparison into an assignment
 39402 |   if((_region == ((modelica_integer) 1)))
       |               ^~
       |               =
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39414:17: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
 39414 |     if((_region == ((modelica_integer) 2)))
       |         ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39414:17: note: remove extraneous parentheses around the comparison to silence this warning
 39414 |     if((_region == ((modelica_integer) 2)))
       |        ~        ^                        ~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39414:17: note: use '=' to turn this equality comparison into an assignment
 39414 |     if((_region == ((modelica_integer) 2)))
       |                 ^~
       |                 =
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39426:19: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
 39426 |       if((_region == ((modelica_integer) 3)))
       |           ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39426:19: note: remove extraneous parentheses around the comparison to silence this warning
 39426 |       if((_region == ((modelica_integer) 3)))
       |          ~        ^                        ~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39426:19: note: use '=' to turn this equality comparison into an assignment
 39426 |       if((_region == ((modelica_integer) 3)))
       |                   ^~
       |                   =
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39440:21: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
 39440 |         if((_region == ((modelica_integer) 5)))
       |             ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39440:21: note: remove extraneous parentheses around the comparison to silence this warning
 39440 |         if((_region == ((modelica_integer) 5)))
       |            ~        ^                        ~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39440:21: note: use '=' to turn this equality comparison into an assignment
 39440 |         if((_region == ((modelica_integer) 5)))
       |                     ^~
       |                     =
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39544:15: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
 39544 |   if((_region == ((modelica_integer) 1)))
       |       ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39544:15: note: remove extraneous parentheses around the comparison to silence this warning
 39544 |   if((_region == ((modelica_integer) 1)))
       |      ~        ^                        ~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39544:15: note: use '=' to turn this equality comparison into an assignment
 39544 |   if((_region == ((modelica_integer) 1)))
       |               ^~
       |               =
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39558:17: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
 39558 |     if((_region == ((modelica_integer) 2)))
       |         ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39558:17: note: remove extraneous parentheses around the comparison to silence this warning
 39558 |     if((_region == ((modelica_integer) 2)))
       |        ~        ^                        ~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39558:17: note: use '=' to turn this equality comparison into an assignment
 39558 |     if((_region == ((modelica_integer) 2)))
       |                 ^~
       |                 =
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39572:19: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
 39572 |       if((_region == ((modelica_integer) 3)))
       |           ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39572:19: note: remove extraneous parentheses around the comparison to silence this warning
 39572 |       if((_region == ((modelica_integer) 3)))
       |          ~        ^                        ~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39572:19: note: use '=' to turn this equality comparison into an assignment
 39572 |       if((_region == ((modelica_integer) 3)))
       |                   ^~
       |                   =
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39593:21: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
 39593 |         if((_region == ((modelica_integer) 4)))
       |             ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39593:21: note: remove extraneous parentheses around the comparison to silence this warning
 39593 |         if((_region == ((modelica_integer) 4)))
       |            ~        ^                        ~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39593:21: note: use '=' to turn this equality comparison into an assignment
 39593 |         if((_region == ((modelica_integer) 4)))
       |                     ^~
       |                     =
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39600:23: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
 39600 |           if((_region == ((modelica_integer) 5)))
       |               ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39600:23: note: remove extraneous parentheses around the comparison to silence this warning
 39600 |           if((_region == ((modelica_integer) 5)))
       |              ~        ^                        ~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39600:23: note: use '=' to turn this equality comparison into an assignment
 39600 |           if((_region == ((modelica_integer) 5)))
       |                       ^~
       |                       =
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39707:15: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
 39707 |   if((_region == ((modelica_integer) 1)))
       |       ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39707:15: note: remove extraneous parentheses around the comparison to silence this warning
 39707 |   if((_region == ((modelica_integer) 1)))
       |      ~        ^                        ~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39707:15: note: use '=' to turn this equality comparison into an assignment
 39707 |   if((_region == ((modelica_integer) 1)))
       |               ^~
       |               =
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39721:17: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
 39721 |     if((_region == ((modelica_integer) 2)))
       |         ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39721:17: note: remove extraneous parentheses around the comparison to silence this warning
 39721 |     if((_region == ((modelica_integer) 2)))
       |        ~        ^                        ~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39721:17: note: use '=' to turn this equality comparison into an assignment
 39721 |     if((_region == ((modelica_integer) 2)))
       |                 ^~
       |                 =
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39735:19: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
 39735 |       if((_region == ((modelica_integer) 3)))
       |           ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39735:19: note: remove extraneous parentheses around the comparison to silence this warning
 39735 |       if((_region == ((modelica_integer) 3)))
       |          ~        ^                        ~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39735:19: note: use '=' to turn this equality comparison into an assignment
 39735 |       if((_region == ((modelica_integer) 3)))
       |                   ^~
       |                   =
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39749:21: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
 39749 |         if((_region == ((modelica_integer) 4)))
       |             ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39749:21: note: remove extraneous parentheses around the comparison to silence this warning
 39749 |         if((_region == ((modelica_integer) 4)))
       |            ~        ^                        ~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39749:21: note: use '=' to turn this equality comparison into an assignment
 39749 |         if((_region == ((modelica_integer) 4)))
       |                     ^~
       |                     =
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39756:23: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
 39756 |           if((_region == ((modelica_integer) 5)))
       |               ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39756:23: note: remove extraneous parentheses around the comparison to silence this warning
 39756 |           if((_region == ((modelica_integer) 5)))
       |              ~        ^                        ~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39756:23: note: use '=' to turn this equality comparison into an assignment
 39756 |           if((_region == ((modelica_integer) 5)))
       |                       ^~
       |                       =
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39925:15: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
 39925 |   if((_region == ((modelica_integer) 1)))
       |       ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39925:15: note: remove extraneous parentheses around the comparison to silence this warning
 39925 |   if((_region == ((modelica_integer) 1)))
       |      ~        ^                        ~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39925:15: note: use '=' to turn this equality comparison into an assignment
 39925 |   if((_region == ((modelica_integer) 1)))
       |               ^~
       |               =
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39937:17: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
 39937 |     if((_region == ((modelica_integer) 2)))
       |         ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39937:17: note: remove extraneous parentheses around the comparison to silence this warning
 39937 |     if((_region == ((modelica_integer) 2)))
       |        ~        ^                        ~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39937:17: note: use '=' to turn this equality comparison into an assignment
 39937 |     if((_region == ((modelica_integer) 2)))
       |                 ^~
       |                 =
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39949:19: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
 39949 |       if((_region == ((modelica_integer) 3)))
       |           ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39949:19: note: remove extraneous parentheses around the comparison to silence this warning
 39949 |       if((_region == ((modelica_integer) 3)))
       |          ~        ^                        ~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39949:19: note: use '=' to turn this equality comparison into an assignment
 39949 |       if((_region == ((modelica_integer) 3)))
       |                   ^~
       |                   =
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39963:21: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
 39963 |         if((_region == ((modelica_integer) 5)))
       |             ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39963:21: note: remove extraneous parentheses around the comparison to silence this warning
 39963 |         if((_region == ((modelica_integer) 5)))
       |            ~        ^                        ~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39963:21: note: use '=' to turn this equality comparison into an assignment
 39963 |         if((_region == ((modelica_integer) 5)))
       |                     ^~
       |                     =
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:40705:18: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
 40705 |       if((_phase == ((modelica_integer) 2)))
       |           ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:40705:18: note: remove extraneous parentheses around the comparison to silence this warning
 40705 |       if((_phase == ((modelica_integer) 2)))
       |          ~       ^                        ~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:40705:18: note: use '=' to turn this equality comparison into an assignment
 40705 |       if((_phase == ((modelica_integer) 2)))
       |                  ^~
       |                  =
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:40784:18: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
 40784 |       if((_phase == ((modelica_integer) 2)))
       |           ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:40784:18: note: remove extraneous parentheses around the comparison to silence this warning
 40784 |       if((_phase == ((modelica_integer) 2)))
       |          ~       ^                        ~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:40784:18: note: use '=' to turn this equality comparison into an assignment
 40784 |       if((_phase == ((modelica_integer) 2)))
       |                  ^~
       |                  =
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42229:15: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
 42229 |   if((_region == ((modelica_integer) 1)))
       |       ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42229:15: note: remove extraneous parentheses around the comparison to silence this warning
 42229 |   if((_region == ((modelica_integer) 1)))
       |      ~        ^                        ~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42229:15: note: use '=' to turn this equality comparison into an assignment
 42229 |   if((_region == ((modelica_integer) 1)))
       |               ^~
       |               =
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42236:17: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
 42236 |     if((_region == ((modelica_integer) 2)))
       |         ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42236:17: note: remove extraneous parentheses around the comparison to silence this warning
 42236 |     if((_region == ((modelica_integer) 2)))
       |        ~        ^                        ~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42236:17: note: use '=' to turn this equality comparison into an assignment
 42236 |     if((_region == ((modelica_integer) 2)))
       |                 ^~
       |                 =
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42243:19: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
 42243 |       if((_region == ((modelica_integer) 4)))
       |           ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42243:19: note: remove extraneous parentheses around the comparison to silence this warning
 42243 |       if((_region == ((modelica_integer) 4)))
       |          ~        ^                        ~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42243:19: note: use '=' to turn this equality comparison into an assignment
 42243 |       if((_region == ((modelica_integer) 4)))
       |                   ^~
       |                   =
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42320:15: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
 42320 |   if((_region == ((modelica_integer) 1)))
       |       ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42320:15: note: remove extraneous parentheses around the comparison to silence this warning
 42320 |   if((_region == ((modelica_integer) 1)))
       |      ~        ^                        ~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42320:15: note: use '=' to turn this equality comparison into an assignment
 42320 |   if((_region == ((modelica_integer) 1)))
       |               ^~
       |               =
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42327:17: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
 42327 |     if((_region == ((modelica_integer) 2)))
       |         ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42327:17: note: remove extraneous parentheses around the comparison to silence this warning
 42327 |     if((_region == ((modelica_integer) 2)))
       |        ~        ^                        ~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42327:17: note: use '=' to turn this equality comparison into an assignment
 42327 |     if((_region == ((modelica_integer) 2)))
       |                 ^~
       |                 =
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42334:19: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
 42334 |       if((_region == ((modelica_integer) 4)))
       |           ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42334:19: note: remove extraneous parentheses around the comparison to silence this warning
 42334 |       if((_region == ((modelica_integer) 4)))
       |          ~        ^                        ~
/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42334:19: note: use '=' to turn this equality comparison into an assignment
 42334 |       if((_region == ((modelica_integer) 4)))
       |                   ^~
       |                   =
45 warnings and 1 error generated.
gmake[2]: *** [CMakeFiles/431.dir/build.make:1756: CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c.o] Error 1
gmake[1]: *** [CMakeFiles/Makefile2:84: CMakeFiles/431.dir/all] Error 2
gmake: *** [Makefile:136: all] Error 2
"
[Timeout remaining time 601]
[Calling sys.exit(0), Time elapsed: 60.35425286460668]
Failed to read output from testmodel.py, exit status != 0:
59.38584446813911 59.284914687 56.91643406
Calling exit ...
<OMPython.OMCSessionZMQ object at 0x7be72bbc0350>