Running: ./testmodel.py --libraries=/home/hudson/saved_omc/libraries/.openmodelica/libraries --ompython_omhome=/usr TransiEnt_TransiEnt.Basics.Blocks.Check.TestPIDControllers.conf.json
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/DymolaCommands master/package.mo", uses=false) [Timeout 180]
"Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/DymolaCommands master/package.mo): time 0.0006444/0.0006444, allocations: 32.61 kB / 22.96 MB, free: 1.602 MB / 18.57 MB
"
[Timeout remaining time 180]
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/package.mo", uses=false) [Timeout 180]
"[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Control/PredictorModels_3508/Check/package.mo:2:1-21:10:writable] Warning: The package.order file contains a class TestReheater, which is expected to be stored in file TestReheater.mo, but seems to be named testReheater.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Control/PredictorModels_3508/Check/testReheater.mo:2:1-117:17:writable] Warning: Expected the package to have name testReheater, but got TestReheater. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/package.mo:2:1-23:10:writable] Warning: PhysicalMills was referenced in the package.order file, but was not found in package.mo, PhysicalMills/package.mo or PhysicalMills.mo.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/package.mo:2:1-22:18:writable] Warning: Expected the package to have name physicalMills, but got PhysicalMills. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/package.mo:2:1-22:18:writable] Warning: The package.order file contains a class Mill_L4_advancedInit, which is expected to be stored in file Mill_L4_advancedInit.mo, but seems to be named mill_L4_advancedInit.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/package.mo:2:1-22:18:writable] Warning: The package.order file contains a class Mill_L4, which is expected to be stored in file Mill_L4.mo, but seems to be named mill_L4.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/mill_L4_advancedInit.mo:2:1-58:25:writable] Warning: Expected the package to have name mill_L4_advancedInit, but got Mill_L4_advancedInit. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/mill_L4_advancedInit.mo:2:1-58:25:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills; but got within ClaRa.Components.Mills.PhysicalMills; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/mill_L4.mo:2:1-315:12:writable] Warning: Expected the package to have name mill_L4, but got Mill_L4. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/mill_L4.mo:2:1-315:12:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills; but got within ClaRa.Components.Mills.PhysicalMills; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/package.mo:2:1-21:10:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills; but got within ClaRa.Components.Mills.PhysicalMills; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/package.mo:2:1-21:10:writable] Warning: The package.order file contains a class TestMillBox_2, which is expected to be stored in file TestMillBox_2.mo, but seems to be named testMillBox_2.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/package.mo:2:1-21:10:writable] Warning: The package.order file contains a class TestMillBox_1_measurementInput, which is expected to be stored in file TestMillBox_1_measurementInput.mo, but seems to be named testMillBox_1_measurementInput.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/package.mo:2:1-21:10:writable] Warning: The package.order file contains a class TestMillBox_1, which is expected to be stored in file TestMillBox_1.mo, but seems to be named testMillBox_1.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/testMillBox_2.mo:2:1-297:18:writable] Warning: Expected the package to have name testMillBox_2, but got TestMillBox_2. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/testMillBox_2.mo:2:1-297:18:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Check; but got within ClaRa.Components.Mills.PhysicalMills.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/testMillBox_1_measurementInput.mo:2:1-1342:35:writable] Warning: Expected the package to have name testMillBox_1_measurementInput, but got TestMillBox_1_measurementInput. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/testMillBox_1_measurementInput.mo:2:1-1342:35:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Check; but got within ClaRa.Components.Mills.PhysicalMills.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/testMillBox_1.mo:2:1-465:18:writable] Warning: Expected the package to have name testMillBox_1, but got TestMillBox_1. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/testMillBox_1.mo:2:1-465:18:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Check; but got within ClaRa.Components.Mills.PhysicalMills.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/package.mo:2:1-29:12:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills; but got within ClaRa.Components.Mills.PhysicalMills; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/FlowClassifier.mo:2:1-346:19:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/CentrifugalClassifier.mo:2:1-380:26:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/GrinderRingRoller.mo:2:1-294:22:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/FuelJoin_distributed.mo:2:1-133:25:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Dryer.mo:2:1-301:10:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/package.mo:2:1-20:17:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/package.mo:2:1-20:13:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Transport_Velocity/package.mo:2:1-20:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Transport_Velocity/Transport_complex.mo:2:1-71:22:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Transport_Velocity/Transport_constant.mo:2:1-49:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Transport_Velocity/Transport_base.mo:2:1-52:19:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Selection_Function/package.mo:2:1-20:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Selection_Function/Selection_Kersting.mo:2:1-80:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Selection_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Selection_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Selection_Function/Selection_Steinmetz.mo:2:1-104:24:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Selection_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Selection_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Selection_Function/Selection_constant.mo:2:1-45:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Selection_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Selection_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Selection_Function/Selection_base.mo:2:1-50:19:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Selection_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Selection_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Breakage_Function/package.mo:2:1-20:22:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Breakage_Function/Breakage_Austin.mo:2:1-109:20:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Breakage_Function/Breakage_Steinmetz.mo:2:1-106:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Breakage_Function/Breakage_constant.mo:2:1-45:22:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Breakage_Function/Breakage_base.mo:2:1-51:18:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Drying/package.mo:2:1-20:11:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Drying/Drying_ideal.mo:2:1-58:17:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Drying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Drying; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Drying/Drying_base.mo:2:1-44:16:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Drying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Drying; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Classifying/package.mo:2:1-20:16:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Classifying/Classifying_flow.mo:2:1-111:21:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Classifying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Classifying; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Classifying/Classifying_centrifugal.mo:2:1-153:28:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Classifying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Classifying; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Classifying/Classifying_centrifugal_base.mo:2:1-45:33:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Classifying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Classifying; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Classifying/Classifying_flow_base.mo:2:1-45:26:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Classifying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Classifying; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/package.mo:2:1-20:12:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/iCom_Dryer.mo:2:1-57:15:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/iCom_FlowClassifier.mo:2:1-67:24:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/iCom_CentrifugalClassifier.mo:2:1-69:31:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/iCom_Grinder.mo:2:1-61:17:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/FuelClassification_example_21classes.mo:2:1-43:41:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/GeometricProgression.mo:2:1-56:25:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/FuelClassification_generic.mo:2:1-43:31:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/FuelClassification_example_05classes.mo:2:1-43:41:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/FuelClassification_example_11classes.mo:2:1-43:41:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/FuelClassification_base.mo:2:1-61:28:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/package.mo:2:1-23:10:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/package.mo:2:1-23:10:writable] Warning: The package.order file contains a class TestFuelJoin, which is expected to be stored in file TestFuelJoin.mo, but seems to be named testFuelJoin.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/package.mo:2:1-23:10:writable] Warning: The package.order file contains a class TestAerosolVolume, which is expected to be stored in file TestAerosolVolume.mo, but seems to be named testAerosolVolume.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/package.mo:2:1-23:10:writable] Warning: The package.order file contains a class TestDryer, which is expected to be stored in file TestDryer.mo, but seems to be named testDryer.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/package.mo:2:1-23:10:writable] Warning: The package.order file contains a class TestGrinder, which is expected to be stored in file TestGrinder.mo, but seems to be named testGrinder.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testFuelJoin.mo:2:1-93:17:writable] Warning: Expected the package to have name testFuelJoin, but got TestFuelJoin. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testFuelJoin.mo:2:1-93:17:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Check; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testAerosolVolume.mo:2:1-176:22:writable] Warning: Expected the package to have name testAerosolVolume, but got TestAerosolVolume. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testAerosolVolume.mo:2:1-176:22:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Check; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testDryer.mo:2:1-93:14:writable] Warning: Expected the package to have name testDryer, but got TestDryer. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testDryer.mo:2:1-93:14:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Check; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testGrinder.mo:2:1-154:16:writable] Warning: Expected the package to have name testGrinder, but got TestGrinder. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testGrinder.mo:2:1-154:16:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Check; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/package.mo): time 0.5462/0.5462, allocations: 100.7 MB / 126.7 MB, free: 36 kB / 106.8 MB
"
[Timeout remaining time 179]
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.1.0+maint.om/package.mo", uses=false) [Timeout 180]
"Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.1.0+maint.om/package.mo): time 0.001295/0.001295, allocations: 80.47 kB / 157.8 MB, free: 1.535 MB / 138.8 MB
"
[Timeout remaining time 180]
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.1.0+maint.om/package.mo", uses=false) [Timeout 180]
"Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.1.0+maint.om/package.mo): time 0.001176/0.001176, allocations: 168.4 kB / 188.7 MB, free: 2.527 MB / 170.8 MB
"
[Timeout remaining time 180]
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.1.0+maint.om/package.mo", uses=false) [Timeout 180]
"Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.1.0+maint.om/package.mo): time 0.9195/0.9195, allocations: 177.1 MB / 396.7 MB, free: 11.95 MB / 314.8 MB
"
[Timeout remaining time 179]
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.2/package.mo", uses=false) [Timeout 180]
"Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.2/package.mo): time 1.948/1.948, allocations: 376.9 MB / 0.8376 GB, free: 15.77 MB / 0.7137 GB
"
[Timeout remaining time 178]
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt master/package.mo", uses=false) [Timeout 180]
"[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt master/Basics/Interfaces/Thermal/package.mo:2:1-91:12:writable] Warning: The package.order file contains a class FluidPortOut_simple, which is expected to be stored in file FluidPortOut_simple.mo, but seems to be named fluidPortOut_simple.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt master/Basics/Interfaces/Thermal/package.mo:2:1-91:12:writable] Warning: The package.order file contains a class FluidPortIn_simple, which is expected to be stored in file FluidPortIn_simple.mo, but seems to be named fluidPortIn_simple.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt master/Basics/Interfaces/Thermal/fluidPortOut_simple.mo:2:1-49:24:writable] Warning: Expected the package to have name fluidPortOut_simple, but got FluidPortOut_simple. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt master/Basics/Interfaces/Thermal/fluidPortIn_simple.mo:2:1-50:23:writable] Warning: Expected the package to have name fluidPortIn_simple, but got FluidPortIn_simple. Proceeding since only the case of the names are different.
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt master/package.mo): time 1.495/1.495, allocations: 241.3 MB / 1.275 GB, free: 8.969 MB / 1.042 GB
"
[Timeout remaining time 178]
Using package TransiEnt with version 2.0.3 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt master/package.mo)
Using package Buildings with version 12.1.2 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.2/package.mo)
Using package Modelica with version 4.1.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.1.0+maint.om/package.mo)
Using package Complex with version 4.1.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.1.0+maint.om/package.mo)
Using package ModelicaServices with version 4.1.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.1.0+maint.om/package.mo)
Using package ClaRa with version 1.8.1 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/package.mo)
Using package DymolaCommands with version 0.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/DymolaCommands master/package.mo)
Running command: setCommandLineOptions("--fmiFlags=s:cvode")
Running command: "" <> buildModelFMU(TransiEnt.Basics.Blocks.Check.TestPIDControllers,fileNamePrefix="TransiEnt_TransiEnt_Basics_Blocks_Check_TestPIDControllers",fmuType="me_cs",version="2.0",platforms={"static"})
"" <> buildModelFMU(TransiEnt.Basics.Blocks.Check.TestPIDControllers,fileNamePrefix="TransiEnt_TransiEnt_Basics_Blocks_Check_TestPIDControllers",fmuType="me_cs",version="2.0",platforms={"static"}) [Timeout 660]
"Notification: Performance of FrontEnd - loaded program: time 1.753e-06/1.753e-06, allocations: 0 / 1.831 GB, free: 13.52 MB / 1.37 GB
Notification: Performance of FrontEnd - Absyn->SCode: time 1.052e-05/1.227e-05, allocations: 4.812 kB / 1.831 GB, free: 13.52 MB / 1.37 GB
Notification: Performance of NFInst.instantiate(TransiEnt.Basics.Blocks.Check.TestPIDControllers): time 0.006087/0.006099, allocations: 6.396 MB / 1.837 GB, free: 7.848 MB / 1.37 GB
Notification: Performance of NFInst.instExpressions: time 0.002618/0.008717, allocations: 2.19 MB / 1.839 GB, free: 5.652 MB / 1.37 GB
Notification: Performance of NFInst.updateImplicitVariability: time 0.0003628/0.00908, allocations: 35.75 kB / 1.839 GB, free: 5.617 MB / 1.37 GB
Notification: Performance of NFTyping.typeComponents: time 0.0003115/0.009392, allocations: 213.6 kB / 1.84 GB, free: 5.406 MB / 1.37 GB
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt master/Basics/Blocks/FirstOrder.mo:39:14-39:82:writable] Warning: In relation PID3.smoothPIDInput.Tau == 0.0, == on Real operands is deprecated in non-function contexts.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt master/Basics/Blocks/FirstOrder.mo:39:14-39:82:writable] Warning: In relation PID3.smoothPIDOutput.Tau == 0.0, == on Real operands is deprecated in non-function contexts.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt master/Basics/Blocks/FirstOrder.mo:39:14-39:82:writable] Warning: In relation PID3.smoothPIDOutput1.Tau == 0.0, == on Real operands is deprecated in non-function contexts.
Notification: Performance of NFTyping.typeBindings: time 0.0004816/0.009873, allocations: 329.2 kB / 1.84 GB, free: 5.082 MB / 1.37 GB
Notification: Performance of NFTyping.typeClassSections: time 0.0008696/0.01074, allocations: 0.8872 MB / 1.841 GB, free: 4.207 MB / 1.37 GB
Notification: Performance of NFFlatten.flatten: time 0.001013/0.01176, allocations: 1.753 MB / 1.843 GB, free: 2.449 MB / 1.37 GB
Notification: Performance of NFFlatten.resolveConnections: time 0.0004642/0.01222, allocations: 419.5 kB / 1.843 GB, free: 2.023 MB / 1.37 GB
Notification: Performance of NFEvalConstants.evaluate: time 0.0005788/0.0128, allocations: 0.8612 MB / 1.844 GB, free: 1.16 MB / 1.37 GB
Notification: Performance of NFSimplifyModel.simplify: time 0.0003442/0.01314, allocations: 454.4 kB / 1.844 GB, free: 0.7148 MB / 1.37 GB
Notification: Performance of NFPackage.collectConstants: time 0.0001256/0.01327, allocations: 152 kB / 1.844 GB, free: 0.5664 MB / 1.37 GB
Notification: Performance of NFFlatten.collectFunctions: time 0.0001534/0.01342, allocations: 148 kB / 1.844 GB, free: 432 kB / 1.37 GB
Notification: Performance of NFScalarize.scalarize: time 0.0002366/0.01366, allocations: 330.7 kB / 1.845 GB, free: 100 kB / 1.37 GB
Notification: Performance of NFVerifyModel.verify: time 0.0003622/0.01402, allocations: 426.8 kB / 1.845 GB, free: 15.68 MB / 1.386 GB
Notification: Performance of NFConvertDAE.convert: time 0.001154/0.01517, allocations: 1.635 MB / 1.847 GB, free: 14.04 MB / 1.386 GB
Notification: Performance of FrontEnd - DAE generated: time 2.194e-06/0.01518, allocations: 0 / 1.847 GB, free: 14.04 MB / 1.386 GB
Notification: Performance of FrontEnd: time 9.72e-07/0.01518, allocations: 3.938 kB / 1.847 GB, free: 14.03 MB / 1.386 GB
Notification: Performance of Transformations before backend: time 1.068e-05/0.01519, allocations: 0 / 1.847 GB, free: 14.03 MB / 1.386 GB
Notification: Model statistics after passing the front-end and creating the data structures used by the back-end:
 * Number of equations: 260
 * Number of variables: 260
Notification: Performance of Generate backend data structure: time 0.001796/0.01698, allocations: 1.833 MB / 1.849 GB, free: 12.15 MB / 1.386 GB
Notification: Performance of prepare preOptimizeDAE: time 3.376e-05/0.01702, allocations: 8.031 kB / 1.849 GB, free: 12.14 MB / 1.386 GB
Notification: Performance of preOpt introduceOutputAliases (simulation): time 0.000124/0.01714, allocations: 164.6 kB / 1.849 GB, free: 11.98 MB / 1.386 GB
Notification: Performance of preOpt normalInlineFunction (simulation): time 0.0002243/0.01737, allocations: 171.9 kB / 1.849 GB, free: 11.81 MB / 1.386 GB
Notification: Performance of preOpt evaluateParameters (simulation): time 0.0007608/0.01813, allocations: 0.7197 MB / 1.85 GB, free: 11.05 MB / 1.386 GB
Notification: Performance of preOpt simplifyIfEquations (simulation): time 4.937e-05/0.01818, allocations: 90.11 kB / 1.85 GB, free: 10.96 MB / 1.386 GB
Notification: Performance of preOpt expandDerOperator (simulation): time 0.000102/0.01828, allocations: 112 kB / 1.85 GB, free: 10.86 MB / 1.386 GB
Notification: Performance of preOpt clockPartitioning (simulation): time 0.001218/0.0195, allocations: 1.232 MB / 1.851 GB, free: 9.5 MB / 1.386 GB
Notification: Performance of preOpt findStateOrder (simulation): time 2.173e-05/0.01952, allocations: 3.938 kB / 1.851 GB, free: 9.496 MB / 1.386 GB
Notification: Performance of preOpt replaceEdgeChange (simulation): time 6.075e-05/0.01958, allocations: 48 kB / 1.851 GB, free: 9.449 MB / 1.386 GB
Notification: Performance of preOpt inlineArrayEqn (simulation): time 1.45e-05/0.01959, allocations: 24 kB / 1.851 GB, free: 9.426 MB / 1.386 GB
Notification: Performance of preOpt removeEqualRHS (simulation): time 0.001122/0.02072, allocations: 0.8391 MB / 1.852 GB, free: 8.586 MB / 1.386 GB
Warning: The model contains alias variables with redundant start and/or conflicting nominal values. It is recommended to resolve the conflicts, because otherwise the system could be hard to solve. To print the conflicting alias sets and the chosen candidates please use -d=aliasConflicts.
Notification: Performance of preOpt removeSimpleEquations (simulation): time 0.004407/0.02512, allocations: 3.98 MB / 1.856 GB, free: 4.488 MB / 1.386 GB
Notification: Performance of preOpt comSubExp (simulation): time 0.001567/0.02669, allocations: 0.9115 MB / 1.857 GB, free: 3.531 MB / 1.386 GB
Notification: Performance of preOpt resolveLoops (simulation): time 0.0006119/0.0273, allocations: 399.5 kB / 1.857 GB, free: 3.125 MB / 1.386 GB
Notification: Performance of preOpt evalFunc (simulation): time 4.34e-05/0.02735, allocations: 17 kB / 1.857 GB, free: 3.109 MB / 1.386 GB
Notification: Performance of preOpt encapsulateWhenConditions (simulation): time 0.0007571/0.0281, allocations: 0.5266 MB / 1.858 GB, free: 2.555 MB / 1.386 GB
Notification: Performance of pre-optimization done (n=90): time 2.214e-06/0.0281, allocations: 0 / 1.858 GB, free: 2.555 MB / 1.386 GB
Notification: Performance of matching and sorting (n=90): time 0.002293/0.0304, allocations: 1.137 MB / 1.859 GB, free: 1.418 MB / 1.386 GB
Notification: Performance of inlineWhenForInitialization (initialization): time 0.0001061/0.0305, allocations: 278 kB / 1.859 GB, free: 1.086 MB / 1.386 GB
Notification: Performance of selectInitializationVariablesDAE (initialization): time 0.0009015/0.03141, allocations: 0.8746 MB / 1.86 GB, free: 196 kB / 1.386 GB
Notification: Performance of collectPreVariables (initialization): time 6.061e-05/0.03147, allocations: 45.7 kB / 1.86 GB, free: 144 kB / 1.386 GB
Notification: Performance of collectInitialEqns (initialization): time 0.0003915/0.03186, allocations: 0.5673 MB / 1.86 GB, free: 15.57 MB / 1.401 GB
Notification: Performance of collectInitialBindings (initialization): time 0.0002014/0.03206, allocations: 325.2 kB / 1.861 GB, free: 15.25 MB / 1.401 GB
Notification: Performance of simplifyInitialFunctions (initialization): time 0.0002554/0.03231, allocations: 194.8 kB / 1.861 GB, free: 15.05 MB / 1.401 GB
Notification: Performance of setup shared object (initialization): time 0.000104/0.03242, allocations: 341.9 kB / 1.861 GB, free: 14.71 MB / 1.401 GB
Notification: Performance of preBalanceInitialSystem (initialization): time 0.0006587/0.03308, allocations: 390 kB / 1.862 GB, free: 14.32 MB / 1.401 GB
Notification: Performance of partitionIndependentBlocks (initialization): time 0.0009742/0.03405, allocations: 0.7808 MB / 1.862 GB, free: 13.41 MB / 1.401 GB
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: PID3.resetValueID = $START.PID3.resetValueID (0.0 = $START.PID3.resetValueID)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: PID3.resetValueP = $START.PID3.resetValueP (0.0 = $START.PID3.resetValueP)
Notification: Performance of analyzeInitialSystem (initialization): time 0.00385/0.0379, allocations: 1.915 MB / 1.864 GB, free: 11.42 MB / 1.401 GB
Notification: Performance of solveInitialSystemEqSystem (initialization): time 5.34e-06/0.03791, allocations: 4 kB / 1.864 GB, free: 11.42 MB / 1.401 GB
Notification: Performance of matching and sorting (n=133) (initialization): time 0.002207/0.04011, allocations: 1.322 MB / 1.866 GB, free: 10.08 MB / 1.401 GB
Notification: Performance of prepare postOptimizeDAE: time 1.72e-05/0.04013, allocations: 8 kB / 1.866 GB, free: 10.07 MB / 1.401 GB
Notification: Performance of postOpt simplifyComplexFunction (initialization): time 9.708e-06/0.04014, allocations: 7.938 kB / 1.866 GB, free: 10.06 MB / 1.401 GB
Notification: Performance of postOpt tearingSystem (initialization): time 0.0006932/0.04083, allocations: 225.8 kB / 1.866 GB, free: 9.836 MB / 1.401 GB
Notification: Performance of postOpt solveSimpleEquations (initialization): time 0.0006324/0.04147, allocations: 223.7 kB / 1.866 GB, free: 9.617 MB / 1.401 GB
Notification: Performance of postOpt calculateStrongComponentJacobians (initialization): time 0.002705/0.04417, allocations: 3.42 MB / 1.869 GB, free: 5.969 MB / 1.401 GB
Notification: Performance of postOpt simplifyAllExpressions (initialization): time 0.0004612/0.04463, allocations: 143.4 kB / 1.869 GB, free: 5.828 MB / 1.401 GB
Notification: Performance of postOpt collapseArrayExpressions (initialization): time 6.318e-05/0.0447, allocations: 40 kB / 1.87 GB, free: 5.789 MB / 1.401 GB
Warning: Assuming fixed start value for the following 7 variables:
         heatCapacitor.T:VARIABLE(min = 0.0 start = 293.15 unit = \"K\" fixed = true nominal = 300.0 )  \"Temperature of element\" type: Real
         PID1.I.y:VARIABLE(flow=false start = PID1.I.y_start_const fixed = true )  \"Connector of Real output signal\" type: Real
         heatCapacitor1.T:VARIABLE(min = 0.0 start = 293.15 unit = \"K\" fixed = true nominal = 300.0 )  \"Temperature of element\" type: Real
         heatCapacitor2.T:VARIABLE(min = 0.0 start = 293.15 unit = \"K\" fixed = true nominal = 300.0 )  \"Temperature of element\" type: Real
         PID3.I.y:VARIABLE(flow=false start = PID3.I.y_start_const fixed = true )  \"Connector of Real output signal\" type: Real
         heatCapacitor3.T:VARIABLE(min = 0.0 start = 293.15 unit = \"K\" fixed = true nominal = 300.0 )  \"Temperature of element\" type: Real
         PID1.switch_OnOff.u2:DISCRETE(flow=false fixed = true )  \"Connector of Boolean input signal\" type: Boolean
Warning: The initial conditions are over specified. The following 2 initial equations are redundant, so they are removed from the initialization system:
         PID3.resetValueID = $START.PID3.resetValueID
         PID3.resetValueP = $START.PID3.resetValueP.
Notification: Performance of preBalanceInitialSystem (initialization_lambda0): time 0.0008701/0.04557, allocations: 0.5573 MB / 1.87 GB, free: 5.23 MB / 1.401 GB
Notification: Performance of partitionIndependentBlocks (initialization_lambda0): time 0.0007558/0.04632, allocations: 0.7495 MB / 1.871 GB, free: 4.344 MB / 1.401 GB
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: PID3.resetValueID = $START.PID3.resetValueID (0.0 = $START.PID3.resetValueID)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: PID3.resetValueP = $START.PID3.resetValueP (0.0 = $START.PID3.resetValueP)
Notification: Performance of analyzeInitialSystem (initialization_lambda0): time 0.003443/0.04976, allocations: 1.817 MB / 1.873 GB, free: 2.457 MB / 1.401 GB
Notification: Performance of solveInitialSystemEqSystem (initialization_lambda0): time 4.628e-06/0.04977, allocations: 4 kB / 1.873 GB, free: 2.453 MB / 1.401 GB
Notification: Performance of matching and sorting (n=133) (initialization_lambda0): time 0.001982/0.05175, allocations: 1.256 MB / 1.874 GB, free: 1.18 MB / 1.401 GB
Notification: Performance of prepare postOptimizeDAE: time 1.17e-05/0.05176, allocations: 8 kB / 1.874 GB, free: 1.172 MB / 1.401 GB
Notification: Performance of postOpt simplifyComplexFunction (initialization): time 6.773e-06/0.05177, allocations: 4 kB / 1.874 GB, free: 1.168 MB / 1.401 GB
Notification: Performance of postOpt tearingSystem (initialization): time 0.000636/0.05241, allocations: 217.8 kB / 1.874 GB, free: 0.9492 MB / 1.401 GB
Notification: Performance of postOpt solveSimpleEquations (initialization): time 0.0005835/0.05299, allocations: 219.6 kB / 1.874 GB, free: 0.7344 MB / 1.401 GB
Notification: Performance of postOpt calculateStrongComponentJacobians (initialization): time 0.00258/0.05557, allocations: 3.426 MB / 1.878 GB, free: 13.08 MB / 1.417 GB
Notification: Performance of postOpt simplifyAllExpressions (initialization): time 0.0004384/0.05601, allocations: 111.4 kB / 1.878 GB, free: 12.97 MB / 1.417 GB
Notification: Performance of postOpt collapseArrayExpressions (initialization): time 5.828e-05/0.05607, allocations: 39.98 kB / 1.878 GB, free: 12.93 MB / 1.417 GB
Warning: Assuming fixed start value for the following 7 variables:
         heatCapacitor.T:VARIABLE(min = 0.0 start = 293.15 unit = \"K\" fixed = true nominal = 300.0 )  \"Temperature of element\" type: Real
         PID1.I.y:VARIABLE(flow=false start = PID1.I.y_start_const fixed = true )  \"Connector of Real output signal\" type: Real
         heatCapacitor1.T:VARIABLE(min = 0.0 start = 293.15 unit = \"K\" fixed = true nominal = 300.0 )  \"Temperature of element\" type: Real
         heatCapacitor2.T:VARIABLE(min = 0.0 start = 293.15 unit = \"K\" fixed = true nominal = 300.0 )  \"Temperature of element\" type: Real
         PID3.I.y:VARIABLE(flow=false start = PID3.I.y_start_const fixed = true )  \"Connector of Real output signal\" type: Real
         heatCapacitor3.T:VARIABLE(min = 0.0 start = 293.15 unit = \"K\" fixed = true nominal = 300.0 )  \"Temperature of element\" type: Real
         PID1.switch_OnOff.u2:DISCRETE(flow=false fixed = true )  \"Connector of Boolean input signal\" type: Boolean
Warning: The initial conditions are over specified. The following 2 initial equations are redundant, so they are removed from the initialization_lambda0 system:
         PID3.resetValueID = $START.PID3.resetValueID
         PID3.resetValueP = $START.PID3.resetValueP.
Notification: Model statistics after passing the back-end for initialization:
 * Number of independent subsystems: 26
 * Number of states: 0 ()
 * Number of discrete variables: 14 ($PRE.PID3.time_lag_I_activation.entryTime,$PRE.PID1.time_lag_I_activation.entryTime,$PRE.PID1.switch_OnOff.u2,PID3.I_activation.y,PID3.booleanPassThrough.y,PID3.time_lag_I_activation.entryTime,PID1.I_activation.y,PID1.time_lag_I_activation.entryTime,PID1.switch_OnOff.u2,$whenCondition1,$whenCondition2,$whenCondition3,PID2.I.local_reset,PID.I.local_reset)
 * Number of discrete states: 0 ()
 * Number of clocked states: 0 ()
 * Top-level inputs: 0
Notification: Strong component statistics for initialization (127):
 * Single equations (assignments): 125
 * Array equations: 0
 * Algorithm blocks: 0
 * Record equations: 0
 * When equations: 0
 * If-equations: 0
 * Equation systems (not torn): 0
 * Torn equation systems: 2
 * Mixed (continuous/discrete) equation systems: 0
Notification: Torn system details for strict tearing set:
 * Linear torn systems (#iteration vars, #inner vars, density): 2 systems
   {(2,2,100.0%), (2,2,100.0%)}
 * Non-linear torn systems (#iteration vars, #inner vars): 0 systems
Notification: Performance of prepare postOptimizeDAE: time 0.0002238/0.05629, allocations: 279.7 kB / 1.878 GB, free: 12.66 MB / 1.417 GB
Notification: Performance of postOpt lateInlineFunction (simulation): time 0.0001268/0.05642, allocations: 123.2 kB / 1.878 GB, free: 12.54 MB / 1.417 GB
Notification: Performance of postOpt wrapFunctionCalls (simulation): time 0.001358/0.05777, allocations: 0.8691 MB / 1.879 GB, free: 11.66 MB / 1.417 GB
Notification: Performance of postOpt inlineArrayEqn (simulation): time 8.546e-06/0.05778, allocations: 11.94 kB / 1.879 GB, free: 11.65 MB / 1.417 GB
Notification: Performance of postOpt constantLinearSystem (simulation): time 3.366e-06/0.05779, allocations: 4 kB / 1.879 GB, free: 11.64 MB / 1.417 GB
Notification: Performance of postOpt simplifysemiLinear (simulation): time 8.707e-06/0.05779, allocations: 3.984 kB / 1.879 GB, free: 11.64 MB / 1.417 GB
Notification: Performance of postOpt removeSimpleEquations (simulation): time 0.002614/0.06041, allocations: 1.858 MB / 1.881 GB, free: 9.734 MB / 1.417 GB
Notification: Performance of postOpt simplifyComplexFunction (simulation): time 3.356e-06/0.06041, allocations: 0 / 1.881 GB, free: 9.734 MB / 1.417 GB
Notification: Performance of postOpt solveSimpleEquations (simulation): time 0.0005925/0.06101, allocations: 179.8 kB / 1.881 GB, free: 9.559 MB / 1.417 GB
Notification: Performance of postOpt tearingSystem (simulation): time 4.669e-06/0.06101, allocations: 4 kB / 1.881 GB, free: 9.555 MB / 1.417 GB
Notification: Performance of postOpt inputDerivativesUsed (simulation): time 4.55e-05/0.06106, allocations: 23.98 kB / 1.881 GB, free: 9.531 MB / 1.417 GB
Notification: Performance of postOpt calculateStrongComponentJacobians (simulation): time 5.831e-06/0.06106, allocations: 7.938 kB / 1.881 GB, free: 9.523 MB / 1.417 GB
Notification: Performance of postOpt calculateStateSetsJacobians (simulation): time 2.294e-06/0.06106, allocations: 4 kB / 1.881 GB, free: 9.52 MB / 1.417 GB
Notification: Performance of postOpt symbolicJacobian (simulation): time 0.001949/0.06301, allocations: 1.415 MB / 1.882 GB, free: 8.078 MB / 1.417 GB
Notification: Performance of postOpt removeConstants (simulation): time 0.0002812/0.06329, allocations: 194.9 kB / 1.883 GB, free: 7.887 MB / 1.417 GB
Notification: Performance of postOpt simplifyTimeIndepFuncCalls (simulation): time 8.662e-05/0.06338, allocations: 24 kB / 1.883 GB, free: 7.863 MB / 1.417 GB
Notification: Performance of postOpt simplifyAllExpressions (simulation): time 0.0003453/0.06373, allocations: 59.94 kB / 1.883 GB, free: 7.805 MB / 1.417 GB
Notification: Performance of postOpt findZeroCrossings (simulation): time 9.876e-05/0.06382, allocations: 60.83 kB / 1.883 GB, free: 7.746 MB / 1.417 GB
Notification: Performance of postOpt collapseArrayExpressions (simulation): time 4.29e-05/0.06387, allocations: 24 kB / 1.883 GB, free: 7.723 MB / 1.417 GB
Notification: Performance of sorting global known variables: time 0.0006149/0.06448, allocations: 0.5841 MB / 1.883 GB, free: 7.129 MB / 1.417 GB
Notification: Performance of sort global known variables: time 7e-08/0.06448, allocations: 0 / 1.883 GB, free: 7.129 MB / 1.417 GB
Notification: Performance of remove unused functions: time 0.0009384/0.06542, allocations: 462.9 kB / 1.884 GB, free: 6.676 MB / 1.417 GB
Notification: Model statistics after passing the back-end for simulation:
 * Number of independent subsystems: 5
 * Number of states: 14 (PID1.smoothPIDInput.y_aux,PID1.smoothPIDOutput.y_aux,PID1.smoothPIDOutput1.y_aux,PID1.resetValueI,PID.I.y,heatCapacitor.T,PID1.resetValueP,PID1.resetValueID,PID1.I.y,heatCapacitor1.T,PID2.I.y,heatCapacitor2.T,PID3.I.y,heatCapacitor3.T)
 * Number of discrete variables: 9 (PID3.booleanPassThrough.y,$whenCondition3,$whenCondition2,$whenCondition1,PID1.switch_OnOff.u2,PID1.time_lag_I_activation.entryTime,PID1.I_activation.y,PID3.time_lag_I_activation.entryTime,PID3.I_activation.y)
 * Number of discrete states: 2 (PID1.switch_OnOff.u2,PID1.toPU.y)
 * Number of clocked states: 0 ()
 * Top-level inputs: 0
Notification: Strong component statistics for simulation (91):
 * Single equations (assignments): 89
 * Array equations: 0
 * Algorithm blocks: 0
 * Record equations: 0
 * When equations: 2
 * If-equations: 0
 * Equation systems (not torn): 0
 * Torn equation systems: 0
 * Mixed (continuous/discrete) equation systems: 0
Notification: Performance of Backend phase and start with SimCode phase: time 0.002237/0.06766, allocations: 1.999 MB / 1.886 GB, free: 4.637 MB / 1.417 GB
Notification: Performance of simCode: created initialization part: time 0.002712/0.07037, allocations: 1.902 MB / 1.888 GB, free: 2.688 MB / 1.417 GB
Notification: Performance of simCode: created event and clocks part: time 2.194e-06/0.07037, allocations: 4 kB / 1.888 GB, free: 2.684 MB / 1.417 GB
Notification: Performance of simCode: created simulation system equations: time 0.0006228/0.07099, allocations: 401.5 kB / 1.888 GB, free: 2.293 MB / 1.417 GB
Notification: Performance of simCode: created of all other equations (e.g. parameter, nominal, assert, etc): time 0.0007715/0.07177, allocations: 212.5 kB / 1.888 GB, free: 2.094 MB / 1.417 GB
Notification: Performance of simCode: created linear, non-linear and system jacobian parts: time 0.01308/0.08484, allocations: 9.826 MB / 1.898 GB, free: 7.934 MB / 1.433 GB
Notification: Performance of simCode: some other stuff during SimCode phase: time 0.0003192/0.08516, allocations: 0.5212 MB / 1.898 GB, free: 7.379 MB / 1.433 GB
Notification: Performance of simCode: alias equations: time 0.0003406/0.0855, allocations: 135.4 kB / 1.898 GB, free: 7.242 MB / 1.433 GB
Notification: Performance of simCode: all other stuff during SimCode phase: time 0.0004126/0.08591, allocations: 480.3 kB / 1.899 GB, free: 6.77 MB / 1.433 GB
Notification: Performance of SimCode: time 7.12e-07/0.08591, allocations: 7.938 kB / 1.899 GB, free: 6.762 MB / 1.433 GB
Notification: Performance of buildModelFMU: Generate the FMI files: time 0.08821/0.1741, allocations: 25.13 MB / 1.923 GB, free: 14.04 MB / 1.464 GB
Notification: Performance of buildModelFMU: Generate platform static: time 7.929/8.103, allocations: 10.03 kB / 1.923 GB, free: 14.04 MB / 1.464 GB
"
[Timeout remaining time 652]
(rm -f TransiEnt_TransiEnt.Basics.Blocks.Check.TestPIDControllers.pipe ; mkfifo TransiEnt_TransiEnt.Basics.Blocks.Check.TestPIDControllers.pipe ; head -c 1048576 < TransiEnt_TransiEnt.Basics.Blocks.Check.TestPIDControllers.pipe >> ../files/TransiEnt_TransiEnt.Basics.Blocks.Check.TestPIDControllers.sim & (cd run_OMSimulator && /home/hudson/saved_omc/OMSimulator/install/bin/OMSimulator  --stripRoot --tempDir=temp_TransiEnt_TransiEnt_Basics_Blocks_Check_TestPIDControllers_fmu --startTime=0 --stopTime=300 --stepSize=1 --mode=me --timeout=240 --tolerance=1e-06 ../TransiEnt_TransiEnt_Basics_Blocks_Check_TestPIDControllers.fmu) > TransiEnt_TransiEnt.Basics.Blocks.Check.TestPIDControllers.pipe 2>&1) [Timeout 252.0]
(rm -f TransiEnt_TransiEnt.Basics.Blocks.Check.TestPIDControllers_OMSimulator-cs-cvode.pipe ; mkfifo TransiEnt_TransiEnt.Basics.Blocks.Check.TestPIDControllers_OMSimulator-cs-cvode.pipe ; head -c 1048576 < TransiEnt_TransiEnt.Basics.Blocks.Check.TestPIDControllers_OMSimulator-cs-cvode.pipe >> /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/files/TransiEnt_TransiEnt.Basics.Blocks.Check.TestPIDControllers_OMSimulator-cs-cvode.sim & (cd run_OMSimulator-cs-cvode && /home/hudson/saved_omc/OMSimulator/install/bin/OMSimulator  --stripRoot --tempDir=temp_TransiEnt_TransiEnt_Basics_Blocks_Check_TestPIDControllers_OMSimulator-cs-cvode_fmu --startTime=0 --stopTime=300 --stepSize=1 --mode=cs --timeout=240 --tolerance=1e-06 ../TransiEnt_TransiEnt_Basics_Blocks_Check_TestPIDControllers_OMSimulator-cs-cvode.fmu) > TransiEnt_TransiEnt.Basics.Blocks.Check.TestPIDControllers_OMSimulator-cs-cvode.pipe 2>&1) [Timeout 252.0]
(rm -f TransiEnt_TransiEnt.Basics.Blocks.Check.TestPIDControllers_OMSimulator-cs-euler.pipe ; mkfifo TransiEnt_TransiEnt.Basics.Blocks.Check.TestPIDControllers_OMSimulator-cs-euler.pipe ; head -c 1048576 < TransiEnt_TransiEnt.Basics.Blocks.Check.TestPIDControllers_OMSimulator-cs-euler.pipe >> /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/files/TransiEnt_TransiEnt.Basics.Blocks.Check.TestPIDControllers_OMSimulator-cs-euler.sim & (cd run_OMSimulator-cs-euler && /home/hudson/saved_omc/OMSimulator/install/bin/OMSimulator  --stripRoot --tempDir=temp_TransiEnt_TransiEnt_Basics_Blocks_Check_TestPIDControllers_OMSimulator-cs-euler_fmu --startTime=0 --stopTime=300 --stepSize=1 --mode=cs --timeout=240 --tolerance=1e-06 ../TransiEnt_TransiEnt_Basics_Blocks_Check_TestPIDControllers_OMSimulator-cs-euler.fmu) > TransiEnt_TransiEnt.Basics.Blocks.Check.TestPIDControllers_OMSimulator-cs-euler.pipe 2>&1) [Timeout 252.0]
(rm -f TransiEnt_TransiEnt.Basics.Blocks.Check.TestPIDControllers_fmpy.pipe ; mkfifo TransiEnt_TransiEnt.Basics.Blocks.Check.TestPIDControllers_fmpy.pipe ; head -c 1048576 < TransiEnt_TransiEnt.Basics.Blocks.Check.TestPIDControllers_fmpy.pipe >> /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/files/TransiEnt_TransiEnt.Basics.Blocks.Check.TestPIDControllers_fmpy.sim & (cd run_fmpy && python3 -m fmpy simulate --output-file ../TransiEnt_TransiEnt.Basics.Blocks.Check.TestPIDControllers_fmpy_res.csv --start-time 0 --stop-time 300 --timeout 240 --relative-tolerance 1e-06 --interface-type ModelExchange --solver CVode --output-interval 1 ../TransiEnt_TransiEnt_Basics_Blocks_Check_TestPIDControllers.fmu) > TransiEnt_TransiEnt.Basics.Blocks.Check.TestPIDControllers_fmpy.pipe 2>&1) [Timeout 252.0]
[Calling sys.exit(0), Time elapsed: 16.839484287425876]