Running: ./testmodel.py --libraries=/home/hudson/saved_omc/libraries/.openmodelica/libraries --ompython_omhome=/usr ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant.conf.json loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/package.mo", uses=false) [Timeout 180] "Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/package.mo): time 0.5207/0.5207, allocations: 111.7 MB / 130.8 MB, free: 5.262 MB / 122.7 MB " [Timeout remaining time 179] Using package ThermoSysPro with version 4.2 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/package.mo) Running command: setCommandLineOptions("--fmiFlags=s:cvode") Running command: "" <> buildModelFMU(ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant,fileNamePrefix="ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant",fmuType="me_cs",version="2.0",platforms={"static"}) "" <> buildModelFMU(ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant,fileNamePrefix="ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant",fmuType="me_cs",version="2.0",platforms={"static"}) [Timeout 660] "Notification: Performance of FrontEnd - loaded program: time 2.745e-06/2.745e-06, allocations: 0 / 210.1 MB, free: 7.07 MB / 202.7 MB Notification: Performance of FrontEnd - Absyn->SCode: time 3.182e-05/3.456e-05, allocations: 4.953 kB / 210.1 MB, free: 7.066 MB / 202.7 MB Notification: Automatically loaded package Complex 4.1.0 due to uses annotation from Modelica. Notification: Automatically loaded package ModelicaServices 4.1.0 due to uses annotation from Modelica. Notification: Automatically loaded package Modelica 4.1.0 due to usage. Notification: Performance of NFInst.instantiate(ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant): time 1.497/1.497, allocations: 332.6 MB / 0.53 GB, free: 5.07 MB / 458.8 MB Notification: Performance of NFInst.instExpressions: time 0.2001/1.697, allocations: 200.4 MB / 0.7257 GB, free: 14.99 MB / 0.6512 GB Notification: Performance of NFInst.updateImplicitVariability: time 0.01755/1.715, allocations: 183.6 kB / 0.7259 GB, free: 14.81 MB / 0.6512 GB [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:36:3-37:80:writable] Warning: Connector Ce is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:38:3-39:78:writable] Warning: Connector Cs is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:42:3-43:99:writable] Warning: Connector M is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeD.mo:20:3-21:80:writable] Warning: Connector Ce is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeD.mo:22:3-23:78:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeD.mo:24:3-25:80:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeD.mo:26:3-27:78:writable] Warning: Connector Cs3 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:36:3-37:80:writable] Warning: Connector Ce is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:38:3-39:78:writable] Warning: Connector Cs is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:42:3-43:99:writable] Warning: Connector M is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:36:3-37:80:writable] Warning: Connector Ce is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:38:3-39:78:writable] Warning: Connector Cs is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:42:3-43:99:writable] Warning: Connector M is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:36:3-37:80:writable] Warning: Connector Ce is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:38:3-39:78:writable] Warning: Connector Cs is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:42:3-43:99:writable] Warning: Connector M is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:36:3-37:80:writable] Warning: Connector Ce is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:38:3-39:78:writable] Warning: Connector Cs is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:42:3-43:99:writable] Warning: Connector M is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:36:3-37:80:writable] Warning: Connector Ce is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:38:3-39:78:writable] Warning: Connector Cs is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:42:3-43:99:writable] Warning: Connector M is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:36:3-37:80:writable] Warning: Connector Ce is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:38:3-39:78:writable] Warning: Connector Cs is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:42:3-43:99:writable] Warning: Connector M is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:36:3-37:80:writable] Warning: Connector Ce is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:38:3-39:78:writable] Warning: Connector Cs is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:42:3-43:99:writable] Warning: Connector M is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:18:3-19:80:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:20:3-21:78:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:22:3-23:78:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:26:3-27:80:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:18:3-19:80:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:20:3-21:78:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:22:3-23:78:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:26:3-27:80:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:21:3-22:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:23:3-24:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:18:3-19:80:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:20:3-21:78:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:22:3-23:78:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:26:3-27:80:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:18:3-19:80:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:20:3-21:78:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:22:3-23:78:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:26:3-27:80:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:21:3-22:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:23:3-24:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:18:3-19:80:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:20:3-21:78:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:22:3-23:78:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:26:3-27:80:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:21:3-22:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:23:3-24:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:18:3-19:80:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:20:3-21:78:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:22:3-23:78:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:26:3-27:80:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:21:3-22:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:23:3-24:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/BoundaryConditions/SinkP.mo:19:3-20:80:writable] Warning: Connector C is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/BoundaryConditions/SourceQ.mo:13:3-14:78:writable] Warning: Connector C is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:21:3-22:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:23:3-24:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/SimpleDynamicCondenser.mo:59:3-60:78:writable] Warning: Connector Cv is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/SimpleDynamicCondenser.mo:61:3-62:79:writable] Warning: Connector Cl is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/SimpleDynamicCondenser.mo:67:3-68:81:writable] Warning: Connector Cee is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/SimpleDynamicCondenser.mo:69:3-70:79:writable] Warning: Connector Cse is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StaticCentrifugalPump.mo:33:3-34:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StaticCentrifugalPump.mo:35:3-36:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/StaticWaterWaterExchangerDTorWorEff.mo:36:3-37:78:writable] Warning: Connector Ec is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/StaticWaterWaterExchangerDTorWorEff.mo:38:3-39:80:writable] Warning: Connector Ef is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/StaticWaterWaterExchangerDTorWorEff.mo:40:3-41:77:writable] Warning: Connector Sf is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/StaticWaterWaterExchangerDTorWorEff.mo:42:3-43:76:writable] Warning: Connector Sc is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:38:3-39:80:writable] Warning: Connector Ee is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:40:3-41:78:writable] Warning: Connector Se is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:42:3-43:78:writable] Warning: Connector Ep is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:44:3-45:80:writable] Warning: Connector Sp is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:46:3-47:76:writable] Warning: Connector Ev is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:38:3-39:80:writable] Warning: Connector Ee is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:40:3-41:78:writable] Warning: Connector Se is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:42:3-43:78:writable] Warning: Connector Ep is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:44:3-45:80:writable] Warning: Connector Sp is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:46:3-47:76:writable] Warning: Connector Ev is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:38:3-39:80:writable] Warning: Connector Ee is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:40:3-41:78:writable] Warning: Connector Se is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:42:3-43:78:writable] Warning: Connector Ep is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:44:3-45:80:writable] Warning: Connector Sp is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:46:3-47:76:writable] Warning: Connector Ev is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:38:3-39:80:writable] Warning: Connector Ee is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:40:3-41:78:writable] Warning: Connector Se is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:42:3-43:78:writable] Warning: Connector Ep is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:44:3-45:80:writable] Warning: Connector Sp is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:46:3-47:76:writable] Warning: Connector Ev is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:21:3-22:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:23:3-24:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeI.mo:20:3-22:80:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeI.mo:23:3-25:81:writable] Warning: Connector Ce3 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeI.mo:26:3-28:80:writable] Warning: Connector Ce4 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeI.mo:29:3-31:79:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeI.mo:32:3-34:78:writable] Warning: Connector Cs4 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeI.mo:35:3-37:77:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeI.mo:38:3-40:78:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeI.mo:41:3-43:79:writable] Warning: Connector Cs3 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:21:3-22:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:23:3-24:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeI.mo:20:3-22:80:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeI.mo:23:3-25:81:writable] Warning: Connector Ce3 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeI.mo:26:3-28:80:writable] Warning: Connector Ce4 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeI.mo:29:3-31:79:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeI.mo:32:3-34:78:writable] Warning: Connector Cs4 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeI.mo:35:3-37:77:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeI.mo:38:3-40:78:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeI.mo:41:3-43:79:writable] Warning: Connector Cs3 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StaticCentrifugalPump.mo:33:3-34:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StaticCentrifugalPump.mo:35:3-36:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:38:3-39:80:writable] Warning: Connector Ee is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:40:3-41:78:writable] Warning: Connector Se is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:42:3-43:78:writable] Warning: Connector Ep is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:44:3-45:80:writable] Warning: Connector Sp is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:46:3-47:76:writable] Warning: Connector Ev is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:21:3-22:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:23:3-24:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:38:3-39:80:writable] Warning: Connector Ee is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:40:3-41:78:writable] Warning: Connector Se is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:42:3-43:78:writable] Warning: Connector Ep is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:44:3-45:80:writable] Warning: Connector Sp is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:46:3-47:76:writable] Warning: Connector Ev is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:21:3-22:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:23:3-24:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:38:3-39:80:writable] Warning: Connector Ee is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:40:3-41:78:writable] Warning: Connector Se is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:42:3-43:78:writable] Warning: Connector Ep is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:44:3-45:80:writable] Warning: Connector Sp is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:46:3-47:76:writable] Warning: Connector Ev is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/StaticWaterWaterExchangerDTorWorEff.mo:36:3-37:78:writable] Warning: Connector Ec is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/StaticWaterWaterExchangerDTorWorEff.mo:38:3-39:80:writable] Warning: Connector Ef is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/StaticWaterWaterExchangerDTorWorEff.mo:40:3-41:77:writable] Warning: Connector Sf is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/StaticWaterWaterExchangerDTorWorEff.mo:42:3-43:76:writable] Warning: Connector Sc is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:21:3-22:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:23:3-24:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:21:3-22:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:23:3-24:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:36:3-37:80:writable] Warning: Connector Ce is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:38:3-39:78:writable] Warning: Connector Cs is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:42:3-43:99:writable] Warning: Connector M is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeD.mo:20:3-21:80:writable] Warning: Connector Ce is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeD.mo:22:3-23:78:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeD.mo:24:3-25:80:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeD.mo:26:3-27:78:writable] Warning: Connector Cs3 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Sensors/SensorT.mo:14:3-15:81:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Sensors/SensorT.mo:16:3-17:79:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/ControlValve.mo:24:3-25:81:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/ControlValve.mo:26:3-27:79:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/ControlValve.mo:24:3-25:81:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/ControlValve.mo:26:3-27:79:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/Combustion/CombustionChambers/GenericCombustion1D.mo:73:3-74:81:writable] Warning: Connector Cfuel is not balanced: The number of potential variables (14) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/Combustion/CombustionChambers/GenericCombustion1D.mo:75:3-76:80:writable] Warning: Connector Ca is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/Combustion/CombustionChambers/GenericCombustion1D.mo:77:3-78:78:writable] Warning: Connector Cfg is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/Combustion/CombustionChambers/GenericCombustion1D.mo:79:3-80:79:writable] Warning: Connector Cws is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/DynamicOnePhaseFlowPipe.mo:58:3-59:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/DynamicOnePhaseFlowPipe.mo:60:3-61:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/FlueGases/Junctions/Splitter2.mo:17:3-18:80:writable] Warning: Connector Ce is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/FlueGases/Junctions/Splitter2.mo:19:3-20:77:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/FlueGases/Junctions/Splitter2.mo:21:3-22:79:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/FlueGases/HeatExchangers/StaticWallFlueGasesExchanger.mo:48:3-49:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/FlueGases/HeatExchangers/StaticWallFlueGasesExchanger.mo:52:3-53:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/DynamicTwoPhaseFlowPipe.mo:90:3-91:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/DynamicTwoPhaseFlowPipe.mo:94:3-95:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:16:3-17:77:writable] Warning: Connector Cfg1 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:18:3-19:79:writable] Warning: Connector Cfg2 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:20:3-21:80:writable] Warning: Connector Cws1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:22:3-23:78:writable] Warning: Connector Cws2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/FlueGases/BoundaryConditions/Sink.mo:12:3-13:80:writable] Warning: Connector C is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/FlueGases/HeatExchangers/StaticWallFlueGasesExchanger.mo:48:3-49:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/FlueGases/HeatExchangers/StaticWallFlueGasesExchanger.mo:52:3-53:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/DynamicTwoPhaseFlowPipe.mo:90:3-91:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/DynamicTwoPhaseFlowPipe.mo:94:3-95:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:16:3-17:77:writable] Warning: Connector Cfg1 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:18:3-19:79:writable] Warning: Connector Cfg2 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:20:3-21:80:writable] Warning: Connector Cws1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:22:3-23:78:writable] Warning: Connector Cws2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/FlueGases/HeatExchangers/StaticWallFlueGasesExchanger.mo:48:3-49:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/FlueGases/HeatExchangers/StaticWallFlueGasesExchanger.mo:52:3-53:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/DynamicTwoPhaseFlowPipe.mo:90:3-91:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/DynamicTwoPhaseFlowPipe.mo:94:3-95:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:16:3-17:77:writable] Warning: Connector Cfg1 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:18:3-19:79:writable] Warning: Connector Cfg2 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:20:3-21:80:writable] Warning: Connector Cws1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:22:3-23:78:writable] Warning: Connector Cws2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/SingularPressureLoss.mo:15:3-16:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/SingularPressureLoss.mo:17:3-18:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/FlueGases/HeatExchangers/StaticWallFlueGasesExchanger.mo:48:3-49:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/FlueGases/HeatExchangers/StaticWallFlueGasesExchanger.mo:52:3-53:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/DynamicTwoPhaseFlowPipe.mo:90:3-91:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/DynamicTwoPhaseFlowPipe.mo:94:3-95:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:16:3-17:77:writable] Warning: Connector Cfg1 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:18:3-19:79:writable] Warning: Connector Cfg2 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:20:3-21:80:writable] Warning: Connector Cws1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:22:3-23:78:writable] Warning: Connector Cws2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/SingularPressureLoss.mo:15:3-16:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/SingularPressureLoss.mo:17:3-18:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/FlueGases/HeatExchangers/StaticWallFlueGasesExchanger.mo:48:3-49:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/FlueGases/HeatExchangers/StaticWallFlueGasesExchanger.mo:52:3-53:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/DynamicTwoPhaseFlowPipe.mo:90:3-91:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/DynamicTwoPhaseFlowPipe.mo:94:3-95:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:16:3-17:77:writable] Warning: Connector Cfg1 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:18:3-19:79:writable] Warning: Connector Cfg2 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:20:3-21:80:writable] Warning: Connector Cws1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:22:3-23:78:writable] Warning: Connector Cws2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/FlueGases/HeatExchangers/StaticWallFlueGasesExchanger.mo:48:3-49:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/FlueGases/HeatExchangers/StaticWallFlueGasesExchanger.mo:52:3-53:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/DynamicTwoPhaseFlowPipe.mo:90:3-91:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/DynamicTwoPhaseFlowPipe.mo:94:3-95:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:16:3-17:77:writable] Warning: Connector Cfg1 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:18:3-19:79:writable] Warning: Connector Cfg2 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:20:3-21:80:writable] Warning: Connector Cws1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:22:3-23:78:writable] Warning: Connector Cws2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/FlueGases/PressureLosses/InvSingularPressureLoss.mo:11:3-12:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/FlueGases/PressureLosses/InvSingularPressureLoss.mo:13:3-14:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/FlueGases/Junctions/Mixer2.mo:17:3-18:81:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/FlueGases/Junctions/Mixer2.mo:19:3-20:78:writable] Warning: Connector Cs is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/FlueGases/Junctions/Mixer2.mo:21:3-22:79:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/FlueGases/HeatExchangers/StaticFluegasesFluegasesExchangerKS.mo:20:3-21:78:writable] Warning: Connector Sc is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/FlueGases/HeatExchangers/StaticFluegasesFluegasesExchangerKS.mo:22:3-23:80:writable] Warning: Connector Ec is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/FlueGases/HeatExchangers/StaticFluegasesFluegasesExchangerKS.mo:24:3-25:80:writable] Warning: Connector Ef is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/FlueGases/HeatExchangers/StaticFluegasesFluegasesExchangerKS.mo:26:3-27:78:writable] Warning: Connector Sf is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/FlueGases/BoundaryConditions/SourcePQ.mo:15:3-16:78:writable] Warning: Connector C is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/FlueGases/Volumes/VolumeATh.mo:36:3-37:80:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/FlueGases/Volumes/VolumeATh.mo:38:3-39:80:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/FlueGases/Volumes/VolumeATh.mo:40:3-41:78:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/FlueGases/Volumes/VolumeATh.mo:44:3-45:78:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:18:3-19:80:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:20:3-21:78:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:22:3-23:78:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:26:3-27:80:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:18:3-19:80:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:20:3-21:78:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:22:3-23:78:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:26:3-27:80:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/BoundaryConditions/SourcePQ.mo:16:3-17:78:writable] Warning: Connector C is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/Combustion/BoundaryConditions/FuelSourcePQ.mo:18:3-19:78:writable] Warning: Connector C is not balanced: The number of potential variables (14) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/ControlValve.mo:24:3-25:81:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/ControlValve.mo:26:3-27:79:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/LoopBreakers/LoopBreakerP.mo:4:3-5:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/LoopBreakers/LoopBreakerP.mo:6:3-7:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/LoopBreakers/LoopBreakerP.mo:4:3-5:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/LoopBreakers/LoopBreakerP.mo:6:3-7:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/LoopBreakers/LoopBreakerP.mo:4:3-5:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/LoopBreakers/LoopBreakerP.mo:6:3-7:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Sensors/SensorQ.mo:8:3-9:81:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Sensors/SensorQ.mo:10:3-11:79:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Sensors/SensorQ.mo:8:3-9:81:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Sensors/SensorQ.mo:10:3-11:79:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:21:3-22:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:23:3-24:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/ControlValve.mo:24:3-25:81:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/ControlValve.mo:26:3-27:79:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:21:3-22:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:23:3-24:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:21:3-22:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:23:3-24:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:18:3-19:80:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:20:3-21:78:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:22:3-23:78:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:26:3-27:80:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/SingularPressureLoss.mo:15:3-16:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/SingularPressureLoss.mo:17:3-18:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/CheckValve.mo:23:3-24:81:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/CheckValve.mo:25:3-26:79:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Sensors/SensorQ.mo:8:3-9:81:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Sensors/SensorQ.mo:10:3-11:79:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeB.mo:20:3-21:80:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeB.mo:22:3-23:78:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeB.mo:24:3-25:78:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeB.mo:26:3-27:80:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:38:3-39:80:writable] Warning: Connector Ee is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:40:3-41:78:writable] Warning: Connector Se is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:42:3-43:78:writable] Warning: Connector Ep is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:44:3-45:80:writable] Warning: Connector Sp is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:46:3-47:76:writable] Warning: Connector Ev is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:38:3-39:80:writable] Warning: Connector Ee is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:40:3-41:78:writable] Warning: Connector Se is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:42:3-43:78:writable] Warning: Connector Ep is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:44:3-45:80:writable] Warning: Connector Sp is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:46:3-47:76:writable] Warning: Connector Ev is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeB.mo:20:3-21:80:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeB.mo:22:3-23:78:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeB.mo:24:3-25:78:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeB.mo:26:3-27:80:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeB.mo:20:3-21:80:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeB.mo:22:3-23:78:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeB.mo:24:3-25:78:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeB.mo:26:3-27:80:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:18:3-19:80:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:20:3-21:78:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:22:3-23:78:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:26:3-27:80:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:18:3-19:80:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:20:3-21:78:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:22:3-23:78:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:26:3-27:80:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/SingularPressureLoss.mo:15:3-16:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/SingularPressureLoss.mo:17:3-18:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/LoopBreakers/LoopBreakerP.mo:4:3-5:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/LoopBreakers/LoopBreakerP.mo:6:3-7:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/SingularPressureLoss.mo:15:3-16:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/SingularPressureLoss.mo:17:3-18:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/SingularPressureLoss.mo:15:3-16:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/SingularPressureLoss.mo:17:3-18:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/SingularPressureLoss.mo:15:3-16:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/SingularPressureLoss.mo:17:3-18:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/SingularPressureLoss.mo:15:3-16:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/SingularPressureLoss.mo:17:3-18:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/SingularPressureLoss.mo:15:3-16:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/SingularPressureLoss.mo:17:3-18:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:18:3-19:80:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:20:3-21:78:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:22:3-23:78:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:26:3-27:80:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:18:3-19:80:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:20:3-21:78:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:22:3-23:78:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:26:3-27:80:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). Notification: Performance of NFTyping.typeComponents: time 0.01205/1.727, allocations: 4.135 MB / 0.7299 GB, free: 10.69 MB / 0.6512 GB Notification: Performance of NFTyping.typeBindings: time 0.3405/2.067, allocations: 12.4 MB / 0.742 GB, free: 8.836 MB / 0.6512 GB [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/Properties/WaterSteam/IF97_packages.mo:470:9-470:27:writable] Warning: cv was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/Properties/WaterSteam/IF97_packages.mo:525:9-525:27:writable] Warning: cv was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/Properties/WaterSteam/IF97_packages.mo:708:9-708:27:writable] Warning: cv was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/Properties/WaterSteamSimple/prop4_Ph.mo:51:3-51:60:writable] Warning: dh1satp was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/Properties/WaterSteamSimple/prop4_Ph.mo:51:3-51:60:writable] Warning: dh2satp was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/Properties/WaterSteamSimple/prop4_Ph_der.mo:118:3-118:151:writable] Warning: du1satp_der was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/Properties/WaterSteamSimple/prop4_Ph_der.mo:118:3-118:151:writable] Warning: du2satp_der was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/Properties/WaterSteam/IF97_packages.mo:964:9-964:35:writable] Warning: h was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/Properties/WaterSteamSimple/prop4_Ps.mo:51:3-51:60:writable] Warning: dh1satp was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/Properties/WaterSteamSimple/prop4_Ps.mo:51:3-51:60:writable] Warning: dh2satp was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed. Notification: Performance of NFTyping.typeClassSections: time 0.04694/2.114, allocations: 24.19 MB / 0.7656 GB, free: 8.496 MB / 0.6512 GB Notification: Performance of NFFlatten.flatten: time 0.05084/2.165, allocations: 55.99 MB / 0.8203 GB, free: 14.41 MB / 0.6668 GB Notification: Performance of NFFlatten.resolveConnections: time 0.02387/2.189, allocations: 15.27 MB / 0.8352 GB, free: 8.465 MB / 0.6668 GB Notification: Performance of NFEvalConstants.evaluate: time 0.05592/2.245, allocations: 28 MB / 0.8626 GB, free: 3.707 MB / 0.6824 GB Notification: Performance of NFSimplifyModel.simplify: time 0.03206/2.277, allocations: 16.39 MB / 0.8786 GB, free: 4.43 MB / 0.698 GB Notification: Performance of NFPackage.collectConstants: time 0.01481/2.292, allocations: 3.526 MB / 0.882 GB, free: 0.9062 MB / 0.698 GB Notification: Performance of NFFlatten.collectFunctions: time 0.06085/2.352, allocations: 30.06 MB / 0.9114 GB, free: 3.297 MB / 0.7293 GB Notification: Performance of NFScalarize.scalarize: time 0.01414/2.367, allocations: 10.31 MB / 0.9214 GB, free: 9.605 MB / 0.7449 GB Notification: Performance of NFVerifyModel.verify: time 0.02878/2.395, allocations: 12.59 MB / 0.9337 GB, free: 13.61 MB / 0.7605 GB Notification: Performance of NFConvertDAE.convert: time 0.08962/2.485, allocations: 62.4 MB / 0.9947 GB, free: 2.07 MB / 0.8074 GB Notification: Performance of FrontEnd - DAE generated: time 7.764e-06/2.485, allocations: 0 / 0.9947 GB, free: 2.07 MB / 0.8074 GB Notification: Performance of FrontEnd: time 2.154e-06/2.485, allocations: 1.094 kB / 0.9947 GB, free: 2.07 MB / 0.8074 GB Notification: Performance of Transformations before backend: time 0.001771/2.487, allocations: 0 / 0.9947 GB, free: 2.07 MB / 0.8074 GB Notification: Model statistics after passing the front-end and creating the data structures used by the back-end: * Number of equations: 8847 * Number of variables: 8847 Notification: Performance of Generate backend data structure: time 0.438/2.925, allocations: 50.61 MB / 1.044 GB, free: 435 MB / 0.8544 GB Notification: Performance of prepare preOptimizeDAE: time 5.705e-05/2.925, allocations: 14.67 kB / 1.044 GB, free: 435 MB / 0.8544 GB Notification: Performance of preOpt introduceOutputAliases (simulation): time 0.01342/2.938, allocations: 3.98 MB / 1.048 GB, free: 434.1 MB / 0.8544 GB Notification: Performance of preOpt normalInlineFunction (simulation): time 0.01903/2.957, allocations: 4.577 MB / 1.052 GB, free: 432.6 MB / 0.8544 GB Notification: Performance of preOpt evaluateParameters (simulation): time 0.02329/2.981, allocations: 10.28 MB / 1.062 GB, free: 428.2 MB / 0.8544 GB Notification: Performance of preOpt simplifyIfEquations (simulation): time 0.008396/2.989, allocations: 11.45 MB / 1.074 GB, free: 416.7 MB / 0.8544 GB Notification: Performance of preOpt expandDerOperator (simulation): time 0.01084/3, allocations: 2.104 MB / 1.076 GB, free: 416 MB / 0.8544 GB Notification: Performance of preOpt clockPartitioning (simulation): time 0.09327/3.093, allocations: 45.6 MB / 1.12 GB, free: 375.8 MB / 0.8544 GB Notification: Performance of preOpt findStateOrder (simulation): time 0.0004896/3.094, allocations: 51.5 kB / 1.12 GB, free: 375.8 MB / 0.8544 GB Notification: Performance of preOpt replaceEdgeChange (simulation): time 0.006996/3.101, allocations: 0.8701 MB / 1.121 GB, free: 374.9 MB / 0.8544 GB Notification: Performance of preOpt inlineArrayEqn (simulation): time 0.0008875/3.101, allocations: 1.296 MB / 1.122 GB, free: 373.6 MB / 0.8544 GB Notification: Performance of preOpt removeEqualRHS (simulation): time 0.08335/3.185, allocations: 46.87 MB / 1.168 GB, free: 327 MB / 0.8544 GB Warning: The model contains alias variables with redundant start and/or conflicting nominal values. It is recommended to resolve the conflicts, because otherwise the system could be hard to solve. To print the conflicting alias sets and the chosen candidates please use -d=aliasConflicts. Notification: Performance of preOpt removeSimpleEquations (simulation): time 0.2296/3.414, allocations: 142 MB / 1.307 GB, free: 186.9 MB / 0.8544 GB Notification: Performance of preOpt comSubExp (simulation): time 0.06086/3.475, allocations: 36.35 MB / 1.342 GB, free: 150.6 MB / 0.8544 GB Notification: Performance of preOpt resolveLoops (simulation): time 0.0479/3.523, allocations: 26.95 MB / 1.369 GB, free: 123.8 MB / 0.8544 GB Notification: Performance of preOpt evalFunc (simulation): time 0.1743/3.698, allocations: 107.6 MB / 1.474 GB, free: 16.5 MB / 0.8544 GB Notification: Performance of preOpt encapsulateWhenConditions (simulation): time 0.3504/4.048, allocations: 31.9 MB / 1.505 GB, free: 417.2 MB / 0.8544 GB Notification: Performance of pre-optimization done (n=5838): time 4.58e-05/4.048, allocations: 1.156 kB / 1.505 GB, free: 417.2 MB / 0.8544 GB Notification: Performance of matching and sorting (n=5848): time 0.6952/4.743, allocations: 270.4 MB / 1.769 GB, free: 175 MB / 0.8544 GB Notification: Performance of inlineWhenForInitialization (initialization): time 0.0004001/4.744, allocations: 1.053 MB / 1.77 GB, free: 173.8 MB / 0.8544 GB Notification: Performance of selectInitializationVariablesDAE (initialization): time 0.01355/4.757, allocations: 7.118 MB / 1.777 GB, free: 166.8 MB / 0.8544 GB Notification: Performance of collectPreVariables (initialization): time 0.01313/4.77, allocations: 433.7 kB / 1.777 GB, free: 166.4 MB / 0.8544 GB [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/CheckValve.mo:6:3-6:96:writable] Warning: The parameter CheckValve.k has fixed = false and a binding equation CheckValve.k = 100.0, which is probably redundant. Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/SingularPressureLoss.mo:4:3-4:55:writable] Warning: The parameter singularPressureLoss_Eco.K has fixed = false and a binding equation singularPressureLoss_Eco.K = 3867.0, which is probably redundant. Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:4:3-4:61:writable] Warning: The parameter lumpedStraightPipe_HP2.K has fixed = false and a binding equation lumpedStraightPipe_HP2.K = 1e-4, which is probably redundant. Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/SingularPressureLoss.mo:4:3-4:55:writable] Warning: The parameter singularPressureLoss_RBT.K has fixed = false and a binding equation singularPressureLoss_RBT.K = 34.39, which is probably redundant. Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/SingularPressureLoss.mo:4:3-4:55:writable] Warning: The parameter singularPressureLoss_SBT.K has fixed = false and a binding equation singularPressureLoss_SBT.K = 910.878, which is probably redundant. Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/ControlValve.mo:4:3-4:103:writable] Warning: The parameter controlValveIP.Cvmax has fixed = false and a binding equation controlValveIP.Cvmax = 8005.0, which is probably redundant. Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/ControlValve.mo:4:3-4:103:writable] Warning: The parameter controlValveHP.Cvmax has fixed = false and a binding equation controlValveHP.Cvmax = 8005.0, which is probably redundant. Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:4:3-4:60:writable] Warning: The parameter Turbine_HP1.Cst has fixed = false and a binding equation Turbine_HP1.Cst = 279474.0, which is probably redundant. Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:4:3-4:61:writable] Warning: The parameter lumpedStraightPipe_HP_IP.K has fixed = false and a binding equation lumpedStraightPipe_HP_IP.K = 10.0, which is probably redundant. Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:4:3-4:61:writable] Warning: The parameter lumpedStraightPipe_HP.K has fixed = false and a binding equation lumpedStraightPipe_HP.K = 10.0, which is probably redundant. Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:4:3-4:61:writable] Warning: The parameter lumpedStraightPipe_HP1.K has fixed = false and a binding equation lumpedStraightPipe_HP1.K = 10.0, which is probably redundant. Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StaticCentrifugalPump.mo:14:3-14:94:writable] Warning: The parameter staticCentrifugalPump1.a1 has fixed = false and a binding equation staticCentrifugalPump1.a1 = -3050.0, which is probably redundant. Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:4:3-4:61:writable] Warning: The parameter lumpedStraightPipe_IP1.K has fixed = false and a binding equation lumpedStraightPipe_IP1.K = 10.0, which is probably redundant. Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StaticCentrifugalPump.mo:14:3-14:94:writable] Warning: The parameter staticCentrifugalPump.a1 has fixed = false and a binding equation staticCentrifugalPump.a1 = -390.0, which is probably redundant. Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:4:3-4:61:writable] Warning: The parameter lumpedStraightPipe_LP3.K has fixed = false and a binding equation lumpedStraightPipe_LP3.K = 10.0, which is probably redundant. Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:4:3-4:61:writable] Warning: The parameter lumpedStraightPipe_LP2.K has fixed = false and a binding equation lumpedStraightPipe_LP2.K = 10.0, which is probably redundant. Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:4:3-4:61:writable] Warning: The parameter lumpedStraightPipe_LP1.K has fixed = false and a binding equation lumpedStraightPipe_LP1.K = 10.0, which is probably redundant. Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:4:3-4:61:writable] Warning: The parameter lumpedStraightPipe_IP3.K has fixed = false and a binding equation lumpedStraightPipe_IP3.K = 10.0, which is probably redundant. Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:4:3-4:60:writable] Warning: The parameter Echappement.Cst has fixed = false and a binding equation Echappement.Cst = 14.7, which is probably redundant. Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:4:3-4:60:writable] Warning: The parameter Turbine_LP3.Cst has fixed = false and a binding equation Turbine_LP3.Cst = 59.4076, which is probably redundant. Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:4:3-4:60:writable] Warning: The parameter Turbine_IP3.Cst has fixed = false and a binding equation Turbine_IP3.Cst = 34076.9, which is probably redundant. Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:4:3-4:60:writable] Warning: The parameter Turbine_LP1.Cst has fixed = false and a binding equation Turbine_LP1.Cst = 4485.97, which is probably redundant. Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:4:3-4:60:writable] Warning: The parameter Turbine_IP1.Cst has fixed = false and a binding equation Turbine_IP1.Cst = 102478.0, which is probably redundant. Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:4:3-4:60:writable] Warning: The parameter Turbine_LP2.Cst has fixed = false and a binding equation Turbine_LP2.Cst = 1215.75, which is probably redundant. Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:4:3-4:60:writable] Warning: The parameter Turbine_IP2.Cst has fixed = false and a binding equation Turbine_IP2.Cst = 53802.6, which is probably redundant. Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:4:3-4:60:writable] Warning: The parameter Turbine_HP.Cst has fixed = false and a binding equation Turbine_HP.Cst = 2.00537e6, which is probably redundant. Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding. Notification: Performance of collectInitialEqns (initialization): time 0.00693/4.777, allocations: 6.419 MB / 1.784 GB, free: 160.8 MB / 0.8544 GB Notification: Performance of collectInitialBindings (initialization): time 0.02931/4.807, allocations: 19.89 MB / 1.803 GB, free: 142.4 MB / 0.8544 GB Notification: Performance of simplifyInitialFunctions (initialization): time 0.04417/4.851, allocations: 6.492 MB / 1.809 GB, free: 135.9 MB / 0.8544 GB Notification: Performance of setup shared object (initialization): time 5.379e-05/4.851, allocations: 301.1 kB / 1.81 GB, free: 135.6 MB / 0.8544 GB Notification: Performance of preBalanceInitialSystem (initialization): time 0.05205/4.903, allocations: 24.58 MB / 1.834 GB, free: 111 MB / 0.8544 GB Notification: Performance of partitionIndependentBlocks (initialization): time 0.05278/4.956, allocations: 30.99 MB / 1.864 GB, free: 78.27 MB / 0.8544 GB Notification: It was not possible to check the given initialization system for consistency symbolically, because the relevant equations are part of an algebraic loop. This is not supported yet. Notification: Performance of analyzeInitialSystem (initialization): time 1.629/6.585, allocations: 0.601 GB / 2.465 GB, free: 274.2 MB / 0.8544 GB Notification: Performance of solveInitialSystemEqSystem (initialization): time 0.0001483/6.585, allocations: 32.55 kB / 2.465 GB, free: 274.1 MB / 0.8544 GB Notification: Performance of matching and sorting (n=6519) (initialization): time 0.1783/6.763, allocations: 83.27 MB / 2.546 GB, free: 192.6 MB / 0.8544 GB Notification: Performance of prepare postOptimizeDAE: time 0.0001116/6.763, allocations: 104 kB / 2.546 GB, free: 192.5 MB / 0.8544 GB Notification: Performance of postOpt simplifyComplexFunction (initialization): time 0.0003069/6.763, allocations: 136.5 kB / 2.546 GB, free: 192.3 MB / 0.8544 GB Notification: Performance of postOpt tearingSystem (initialization): time 1.504/8.268, allocations: 0.8511 GB / 3.398 GB, free: 67.14 MB / 0.8544 GB Notification: Performance of postOpt solveSimpleEquations (initialization): time 0.005481/8.273, allocations: 1.687 MB / 3.399 GB, free: 65.95 MB / 0.8544 GB Notification: Performance of postOpt calculateStrongComponentJacobians (initialization): time 0.008206/8.281, allocations: 12.52 MB / 3.411 GB, free: 54.28 MB / 0.8544 GB Notification: Performance of postOpt simplifyAllExpressions (initialization): time 0.02424/8.305, allocations: 2.809 MB / 3.414 GB, free: 52.76 MB / 0.8544 GB Notification: Performance of postOpt collapseArrayExpressions (initialization): time 0.009401/8.315, allocations: 1.241 MB / 3.415 GB, free: 51.95 MB / 0.8544 GB Warning: Assuming fixed start value for the following 4 variables: TemperatureControl.pIsat.Integrateur1.x0:DISCRETE(fixed = true protected = true ) type: Real regulation_Level_Condenser.pIsat.Integrateur1.x0:DISCRETE(fixed = true protected = true ) type: Real regulation_Level_Condenser.pIsat1.Integrateur1.x0:DISCRETE(fixed = true protected = true ) type: Real Pump_VelocityControl.pIsat.Integrateur1.x0:DISCRETE(fixed = true protected = true ) type: Real Warning: The initial conditions are over specified. The following 30 initial equations are redundant, so they are removed from the initialization system: $DER.splitter_TurbineIP2.P = 0.0 $DER.splitter_Turbine_HP.P = 0.0 $DER.Boiler_walls.TwoPhaseFlowPipe.Q[1] = 0.0 $DER.RMT_RHT.TwoPhaseFlowPipe.Q[4] = 0.0 $DER.SBT.TwoPhaseFlowPipe.Q[1] = 0.0 $DER.RBT.TwoPhaseFlowPipe.Q[1] = 0.0 $DER.RBT.TwoPhaseFlowPipe.Q[4] = 0.0 $DER.Economiseur.TwoPhaseFlowPipe.Q[1] = 0.0 $DER.SMT_SHT.TwoPhaseFlowPipe.Q[3] = 0.0 $DER.SMT_SHT.TwoPhaseFlowPipe.Q[4] = 0.0 $DER.volumeA.P = 0.0 $DER.TemperatureControl.pIsat.Integrateur1.x = 0.0 $DER.volume_HP2.P = 0.0 $DER.volume_HP1Vap1.P = 0.0 $DER.volume_HP21.P = 0.0 $DER.volume_HP21.h = 0.0 $DER.pT1_2.x = 0.0 CheckValve.Q = $START.CheckValve.Q SMT_SHT.TwoPhaseFlowPipe.P[5] = $START.SMT_SHT.TwoPhaseFlowPipe.P[5] RMT_RHT.TwoPhaseFlowPipe.P[5] = $START.RMT_RHT.TwoPhaseFlowPipe.P[5] lumpedStraightPipe_HP_IP.Q = $START.lumpedStraightPipe_HP_IP.Q lumpedStraightPipe_LP3.Q = $START.lumpedStraightPipe_LP3.Q splitter_TurbineLP3.P = $START.splitter_TurbineLP3.P lumpedStraightPipe_LP2.Q = $START.lumpedStraightPipe_LP2.Q splitter_TurbineLP2.P = $START.splitter_TurbineLP2.P lumpedStraightPipe_LP1.Q = $START.lumpedStraightPipe_LP1.Q splitter_TurbineLP1.P = $START.splitter_TurbineLP1.P splitter_TurbineIP3.P = $START.splitter_TurbineIP3.P splitter_TurbineIP2.P = $START.splitter_TurbineIP2.P Turbine_HP.Pe = $START.Turbine_HP.Pe. Notification: Model statistics after passing the back-end for initialization: * Number of independent subsystems: 484 * Number of states: 0 () * Number of discrete variables: 348 ($PRE.TemperatureControl.pIsat.Integrateur1.x0,TemperatureControl.pIsat.Integrateur1.x0,$PRE.regulation_Level_Condenser.pIsat.Integrateur1.x0,regulation_Level_Condenser.pIsat.Integrateur1.x0,$PRE.regulation_Level_Condenser.pIsat1.Integrateur1.x0,regulation_Level_Condenser.pIsat1.Integrateur1.x0,$PRE.Pump_VelocityControl.pIsat.Integrateur1.x0,Pump_VelocityControl.pIsat.Integrateur1.x0,$PRE.CheckValve.touvert,$whenCondition2,$PRE.CheckValve.tferme,$whenCondition1,Pump_VelocityControl.pIsat.Integrateur1.reset.signal,regulation_Level_Condenser.pIsat.Integrateur1.reset.signal,TemperatureControl.pIsat.Integrateur1.reset.signal,CheckValve.tferme,CheckValve.touvert,CheckValve.ouvert,$PRE.CheckValve.ouvert,regulation_Level_Condenser.echelon.yL.signal,regulation_Level_Condenser.edge.yL.signal,regulation_Level_Condenser.edge.uL.signal,$PRE.regulation_Level_Condenser.edge.uL.signal,$whenCondition3,volume_HP22.Cs2.b,volume_HP22.Cs1.b,volume_HP22.Ce2.a,volume_HP22.Ce1.a,volume_HP21.Cs2.b,volume_HP21.Cs1.b,volume_HP21.Ce2.a,volume_HP21.Ce1.a,singularPressureLoss7.C2.b,singularPressureLoss7.C1.a,singularPressureLoss6.C2.b,singularPressureLoss6.C1.a,singularPressureLoss5.C2.b,singularPressureLoss5.C1.a,singularPressureLoss4.C2.b,singularPressureLoss4.C1.a,singularPressureLoss3.C2.b,singularPressureLoss3.C1.a,singularPressureLoss2.C2.b,singularPressureLoss2.C1.a,singularPressureLoss1.C2.b,singularPressureLoss1.C1.a,volume_HP1Vap1.Cs2.b,volume_HP1Vap1.Cs1.b,volume_HP1Vap1.Ce2.a,volume_HP1Vap1.Ce1.a,volume_HP1Vap.Cs2.b,volume_HP1Vap.Cs1.b,volume_HP1Vap.Ce2.a,volume_HP1Vap.Ce1.a,volume_HP3.Cs2.b,volume_HP3.Cs1.b,volume_HP3.Ce2.a,volume_HP3.Ce1.a,volume_HP2.Cs2.b,volume_HP2.Cs1.b,volume_HP2.Ce2.a,volume_HP2.Ce1.a,ReheaterHP2_1.Ev.a,ReheaterHP2_1.Sp.b,ReheaterHP2_1.Ep.a,ReheaterHP2_1.Se.b,ReheaterHP2_1.Ee.a,ReheaterHP1_1.Ev.a,ReheaterHP1_1.Sp.b,ReheaterHP1_1.Ep.a,ReheaterHP1_1.Se.b,ReheaterHP1_1.Ee.a,volume_HP1.Cs2.b,volume_HP1.Cs1.b,volume_HP1.Ce2.a,volume_HP1.Ce1.a,sensorQ.C2.b,sensorQ.C1.a,CheckValve.C2.b,CheckValve.C1.a,singularPressureLoss_Eco.C2.b,singularPressureLoss_Eco.C1.a,splitter_condenser.Cs2.b,splitter_condenser.Cs1.b,splitter_condenser.Ce2.a,splitter_condenser.Ce1.a,lumpedStraightPipe_HP2.C2.b,lumpedStraightPipe_HP2.C1.a,lumpedStraightPipe_Condenser1.C2.b,lumpedStraightPipe_Condenser1.C1.a,controlValve_Condenser.C2.b,controlValve_Condenser.C1.a,lumpedStraightPipe_Low.C2.b,lumpedStraightPipe_Low.C1.a,Sensor_Qvap_Cond2.C2.b,Sensor_Qvap_Cond2.C1.a,Sensor_Qvap_Cond.C2.b,Sensor_Qvap_Cond.C1.a,loopBreakerP_Cond.C2.b,loopBreakerP_Cond.C1.a,loopBreakerP_ReDrum.C2.b,loopBreakerP_ReDrum.C1.a,loopBreakerP_Drum_2.C2.b,loopBreakerP_Drum_2.C1.a,controlValveEco.C2.b,controlValveEco.C1.a,fuelSourcePQ.C.b,sourceQ.C.b,volumeA.Cs2.b,volumeA.Cs1.b,volumeA.Ce2.a,volumeA.Ce1.a,volumeA1.Cs2.b,volumeA1.Cs1.b,volumeA1.Ce2.a,volumeA1.Ce1.a,AirPreheater.Ce2.a,AirPreheater.Cs1.b,AirPreheater.Cs2.b,AirPreheater.Ce1.a,sourceAir.C.b,RA.Sf.b,RA.Ef.a,RA.Ec.a,RA.Sc.b,mixer2_1.Ce1.a,mixer2_1.Cs.b,mixer2_1.Ce2.a,singularPressureLoss.C2.b,singularPressureLoss.C1.a,SMT_SHT.TwoPhaseFlowPipe.C2.b,SMT_SHT.TwoPhaseFlowPipe.C1.a,SMT_SHT.ExchangerFlueGasesMetal.C2.b,SMT_SHT.ExchangerFlueGasesMetal.C1.a,Economiseur.TwoPhaseFlowPipe.C2.b,Economiseur.TwoPhaseFlowPipe.C1.a,Economiseur.ExchangerFlueGasesMetal.C2.b,Economiseur.ExchangerFlueGasesMetal.C1.a,singularPressureLoss_RBT.C2.b,singularPressureLoss_RBT.C1.a,RBT.TwoPhaseFlowPipe.C2.b,RBT.TwoPhaseFlowPipe.C1.a,RBT.ExchangerFlueGasesMetal.C2.b,RBT.ExchangerFlueGasesMetal.C1.a,singularPressureLoss_SBT.C2.b,singularPressureLoss_SBT.C1.a,SBT.TwoPhaseFlowPipe.C2.b,SBT.TwoPhaseFlowPipe.C1.a,SBT.ExchangerFlueGasesMetal.C2.b,SBT.ExchangerFlueGasesMetal.C1.a,RMT_RHT.TwoPhaseFlowPipe.C2.b,RMT_RHT.TwoPhaseFlowPipe.C1.a,RMT_RHT.ExchangerFlueGasesMetal.C2.b,RMT_RHT.ExchangerFlueGasesMetal.C1.a,puitsFumeesPTQXA1.C.a,Boiler_walls.TwoPhaseFlowPipe.C2.b,Boiler_walls.TwoPhaseFlowPipe.C1.a,Boiler_walls.ExchangerFlueGasesMetal.C2.b,Boiler_walls.ExchangerFlueGasesMetal.C1.a,splitter2_1.Cs2.b,splitter2_1.Cs1.b,splitter2_1.Ce.a,Wall_screen.C2.b,Wall_screen.C1.a,genericCombustion.Cws.a,genericCombustion.Cfg.b,genericCombustion.Ca.a,genericCombustion.Cfuel.a,controlValveIP.C2.b,controlValveIP.C1.a,controlValveHP.C2.b,controlValveHP.C1.a,sensorT.C2.b,sensorT.C1.a,splitter_Turbine_HP.Cs3.b,splitter_Turbine_HP.Cs2.b,splitter_Turbine_HP.Cs1.b,splitter_Turbine_HP.Ce.a,Turbine_HP1.Cs.b,Turbine_HP1.Ce.a,lumpedStraightPipe_HP_IP.C2.b,lumpedStraightPipe_HP_IP.C1.a,lumpedStraightPipe_HP.C2.b,lumpedStraightPipe_HP.C1.a,Desuperheater.Sc.b,Desuperheater.Sf.b,Desuperheater.Ef.a,Desuperheater.Ec.a,ReheaterHP1.Ev.a,ReheaterHP1.Sp.b,ReheaterHP1.Ep.a,ReheaterHP1.Se.b,ReheaterHP1.Ee.a,lumpedStraightPipe_HP1.C2.b,lumpedStraightPipe_HP1.C1.a,ReheaterHP2.Ev.a,ReheaterHP2.Sp.b,ReheaterHP2.Ep.a,ReheaterHP2.Se.b,ReheaterHP2.Ee.a,lumpedStraightPipe_Desu.C2.b,lumpedStraightPipe_Desu.C1.a,ReheaterHP3.Ev.a,ReheaterHP3.Sp.b,ReheaterHP3.Ep.a,ReheaterHP3.Se.b,ReheaterHP3.Ee.a,staticCentrifugalPump1.C2.b,staticCentrifugalPump1.C1.a,Drum_2.Cs3.b,Drum_2.Cs2.b,Drum_2.Cs1.b,Drum_2.Cs4.b,Drum_2.Ce1.a,Drum_2.Ce4.a,Drum_2.Ce3.a,Drum_2.Ce2.a,lumpedStraightPipe_IP1.C2.b,lumpedStraightPipe_IP1.C1.a,Drum_1.Cs3.b,Drum_1.Cs2.b,Drum_1.Cs1.b,Drum_1.Cs4.b,Drum_1.Ce1.a,Drum_1.Ce4.a,Drum_1.Ce3.a,Drum_1.Ce2.a,pipePressureLoss_LP3_Drum.C2.b,pipePressureLoss_LP3_Drum.C1.a,ReheaterIP.Ev.a,ReheaterIP.Sp.b,ReheaterIP.Ep.a,ReheaterIP.Se.b,ReheaterIP.Ee.a,ReheaterLP1.Ev.a,ReheaterLP1.Sp.b,ReheaterLP1.Ep.a,ReheaterLP1.Se.b,ReheaterLP1.Ee.a,ReheaterLP2.Ev.a,ReheaterLP2.Sp.b,ReheaterLP2.Ep.a,ReheaterLP2.Se.b,ReheaterLP2.Ee.a,ReheaterLP3.Ev.a,ReheaterLP3.Sp.b,ReheaterLP3.Ep.a,ReheaterLP3.Se.b,ReheaterLP3.Ee.a,ReDrum.Sc.b,ReDrum.Sf.b,ReDrum.Ef.a,ReDrum.Ec.a,staticCentrifugalPump.C2.b,staticCentrifugalPump.C1.a,Condenser.Cse.b,Condenser.Cee.a,Condenser.Cl.b,Condenser.Cv.a,lumpedStraightPipe_Condenser2.C2.b,lumpedStraightPipe_Condenser2.C1.a,SourceCaloporteur.C.b,PuitsCaloporteur.C.a,lumpedStraightPipe_LP3.C2.b,lumpedStraightPipe_LP3.C1.a,splitter_TurbineLP3.Cs2.b,splitter_TurbineLP3.Cs1.b,splitter_TurbineLP3.Ce2.a,splitter_TurbineLP3.Ce1.a,lumpedStraightPipe_LP2.C2.b,lumpedStraightPipe_LP2.C1.a,splitter_TurbineLP2.Cs2.b,splitter_TurbineLP2.Cs1.b,splitter_TurbineLP2.Ce2.a,splitter_TurbineLP2.Ce1.a,lumpedStraightPipe_LP1.C2.b,lumpedStraightPipe_LP1.C1.a,splitter_TurbineLP1.Cs2.b,splitter_TurbineLP1.Cs1.b,splitter_TurbineLP1.Ce2.a,splitter_TurbineLP1.Ce1.a,splitter_TurbineIP3.Cs2.b,splitter_TurbineIP3.Cs1.b,splitter_TurbineIP3.Ce2.a,splitter_TurbineIP3.Ce1.a,lumpedStraightPipe_IP3.C2.b,lumpedStraightPipe_IP3.C1.a,splitter_TurbineIP2.Cs2.b,splitter_TurbineIP2.Cs1.b,splitter_TurbineIP2.Ce2.a,splitter_TurbineIP2.Ce1.a,splitter_TurbineIP1.Cs2.b,splitter_TurbineIP1.Cs1.b,splitter_TurbineIP1.Ce2.a,splitter_TurbineIP1.Ce1.a,Echappement.Cs.b,Echappement.Ce.a,Turbine_LP3.Cs.b,Turbine_LP3.Ce.a,Turbine_IP3.Cs.b,Turbine_IP3.Ce.a,Turbine_LP1.Cs.b,Turbine_LP1.Ce.a,Turbine_IP1.Cs.b,Turbine_IP1.Ce.a,Turbine_LP2.Cs.b,Turbine_LP2.Ce.a,Turbine_IP2.Cs.b,Turbine_IP2.Ce.a,splitter_Turbine_HP1.Cs3.b,splitter_Turbine_HP1.Cs2.b,splitter_Turbine_HP1.Cs1.b,splitter_Turbine_HP1.Ce.a,Turbine_HP.Cs.b,Turbine_HP.Ce.a,volume_HP22.Cs2.a,volume_HP22.Ce2.b,volume_HP21.Cs2.a,volume_HP21.Ce2.b,volume_HP1Vap1.Ce2.b,volume_HP1Vap.Ce2.b,volume_HP3.Cs1.a,volume_HP2.Ce1.b,ReheaterHP1_1.Ep.b,volume_HP1.Cs1.a,splitter_condenser.Cs2.a,volumeA.Cs2.a,volumeA1.Ce2.b,AirPreheater.Cs2.a,AirPreheater.Ce2.b,splitter_Turbine_HP.Cs1.a,ReheaterHP1.Ep.b,Drum_2.Cs4.a,Drum_2.Cs3.a,Drum_2.Cs2.a,Drum_2.Ce3.b,Drum_1.Cs4.a,Drum_1.Cs3.a,Drum_1.Cs2.a,Drum_1.Ce4.b,Drum_1.Ce2.b,ReheaterIP.Ep.b,ReheaterLP3.Ep.b,splitter_TurbineLP3.Ce2.b,splitter_TurbineLP2.Ce2.b,splitter_TurbineLP1.Ce2.b,splitter_TurbineIP2.Ce2.b,splitter_TurbineIP1.Ce2.b) * Number of discrete states: 0 () * Number of clocked states: 0 () * Top-level inputs: 0 Notification: Strong component statistics for initialization (1049): * Single equations (assignments): 971 * Array equations: 0 * Algorithm blocks: 2 * Record equations: 62 * When equations: 0 * If-equations: 0 * Equation systems (not torn): 3 * Torn equation systems: 11 * Mixed (continuous/discrete) equation systems: 0 Notification: Equation system details (not torn): * Constant Jacobian (size): 0 systems * Linear Jacobian (size,density): 1 system {(2,100.0%)} * Non-linear Jacobian (size): 2 systems {1, 1} * Without analytic Jacobian (size): 0 systems Notification: Torn system details for strict tearing set: * Linear torn systems (#iteration vars, #inner vars, density): 2 systems {(4,1,62.5%), (1,1,100.0%)} * Non-linear torn systems (#iteration vars, #inner vars): 9 systems {(1,3), (1,4), (1,3), (1,3), (1,3), (294,1675), (1,1), (9,3), (1,1)} Notification: Performance of prepare postOptimizeDAE: time 0.02584/8.341, allocations: 5.559 MB / 3.421 GB, free: 49.48 MB / 0.8544 GB Notification: Performance of postOpt lateInlineFunction (simulation): time 0.01328/8.354, allocations: 2.277 MB / 3.423 GB, free: 48.58 MB / 0.8544 GB Notification: Performance of postOpt wrapFunctionCalls (simulation): time 0.5182/8.872, allocations: 102.6 MB / 3.523 GB, free: 370.7 MB / 0.8544 GB Notification: Performance of postOpt inlineArrayEqn (simulation): time 0.1976/9.07, allocations: 87.49 MB / 3.609 GB, free: 284.7 MB / 0.8544 GB Notification: Performance of postOpt constantLinearSystem (simulation): time 0.0001405/9.07, allocations: 16 kB / 3.609 GB, free: 284.7 MB / 0.8544 GB Notification: Performance of postOpt simplifysemiLinear (simulation): time 0.001033/9.071, allocations: 205.6 kB / 3.609 GB, free: 284.5 MB / 0.8544 GB Warning: The model contains alias variables with redundant start and/or conflicting nominal values. It is recommended to resolve the conflicts, because otherwise the system could be hard to solve. To print the conflicting alias sets and the chosen candidates please use -d=aliasConflicts. Notification: Performance of postOpt removeSimpleEquations (simulation): time 0.3435/9.414, allocations: 153.5 MB / 3.759 GB, free: 135.2 MB / 0.8544 GB Notification: Performance of postOpt simplifyComplexFunction (simulation): time 0.0007387/9.415, allocations: 30.12 kB / 3.759 GB, free: 135.2 MB / 0.8544 GB Notification: Performance of postOpt solveSimpleEquations (simulation): time 0.02787/9.443, allocations: 8.666 MB / 3.767 GB, free: 126.6 MB / 0.8544 GB Notification: Performance of postOpt tearingSystem (simulation): time 0.08388/9.527, allocations: 66.93 MB / 3.833 GB, free: 59.42 MB / 0.8544 GB Notification: Performance of postOpt inputDerivativesUsed (simulation): time 0.01172/9.539, allocations: 1.151 MB / 3.834 GB, free: 58.27 MB / 0.8544 GB Notification: Performance of postOpt calculateStrongComponentJacobians (simulation): time 0.4223/9.961, allocations: 166.8 MB / 3.997 GB, free: 282.5 MB / 0.8544 GB Notification: Performance of postOpt calculateStateSetsJacobians (simulation): time 4.578e-06/9.961, allocations: 3.984 kB / 3.997 GB, free: 282.5 MB / 0.8544 GB Notification: Performance of postOpt symbolicJacobian (simulation): time 0.3053/10.27, allocations: 130.7 MB / 4.124 GB, free: 174.5 MB / 0.8544 GB Notification: Performance of postOpt removeConstants (simulation): time 0.02705/10.29, allocations: 7.257 MB / 4.131 GB, free: 167.5 MB / 0.8544 GB Notification: Performance of postOpt simplifyTimeIndepFuncCalls (simulation): time 0.01358/10.31, allocations: 0.7848 MB / 4.132 GB, free: 166.7 MB / 0.8544 GB Notification: Performance of postOpt simplifyAllExpressions (simulation): time 0.02993/10.34, allocations: 2.855 MB / 4.135 GB, free: 163.9 MB / 0.8544 GB Notification: Performance of postOpt findZeroCrossings (simulation): time 0.01369/10.35, allocations: 2.849 MB / 4.138 GB, free: 161 MB / 0.8544 GB Notification: Performance of postOpt collapseArrayExpressions (simulation): time 0.01086/10.36, allocations: 1.3 MB / 4.139 GB, free: 159.7 MB / 0.8544 GB Notification: Performance of sorting global known variables: time 0.006569/10.37, allocations: 4.2 MB / 4.143 GB, free: 155.6 MB / 0.8544 GB Notification: Performance of sort global known variables: time 2.3e-07/10.37, allocations: 4 kB / 4.143 GB, free: 155.6 MB / 0.8544 GB Notification: Performance of remove unused functions: time 0.05033/10.42, allocations: 11.21 MB / 4.154 GB, free: 144.7 MB / 0.8544 GB Notification: Model statistics after passing the back-end for simulation: * Number of independent subsystems: 8 * Number of states: 152 (splitter_Turbine_HP1.P,splitter_Turbine_HP1.h,splitter_TurbineIP1.h,splitter_TurbineIP2.P,splitter_TurbineIP2.h,splitter_TurbineIP3.h,splitter_TurbineLP1.h,splitter_TurbineLP2.h,splitter_TurbineLP3.h,Condenser.P,Condenser.hl,Condenser.hv,Condenser.Vv,Drum_1.h,Drum_2.h,splitter_Turbine_HP.P,splitter_Turbine_HP.h,Wall_screen.P[2],Wall_screen.P[3],Wall_screen.P[4],Wall_screen.P[5],Wall_screen.P[6],Wall_screen.P[7],Wall_screen.P[8],Wall_screen.Q[1],Wall_screen.Q[2],Wall_screen.Q[3],Wall_screen.Q[4],Wall_screen.Q[5],Wall_screen.Q[6],Wall_screen.Q[7],Wall_screen.h[2],Wall_screen.h[3],Wall_screen.h[4],Wall_screen.h[5],Wall_screen.h[6],Wall_screen.h[7],Wall_screen.h[8],heatExchangerWall.Tp[1],heatExchangerWall.Tp[2],heatExchangerWall.Tp[3],heatExchangerWall.Tp[4],heatExchangerWall.Tp[5],heatExchangerWall.Tp[6],heatExchangerWall.Tp[7],Boiler_walls.ExchangerWall.Tp[1],Boiler_walls.ExchangerWall.Tp[2],Boiler_walls.ExchangerWall.Tp[3],Boiler_walls.TwoPhaseFlowPipe.P[2],Boiler_walls.TwoPhaseFlowPipe.P[3],Boiler_walls.TwoPhaseFlowPipe.P[4],Boiler_walls.TwoPhaseFlowPipe.Q[1],Boiler_walls.TwoPhaseFlowPipe.Q[2],Boiler_walls.TwoPhaseFlowPipe.Q[3],Boiler_walls.TwoPhaseFlowPipe.h[2],Boiler_walls.TwoPhaseFlowPipe.h[3],Boiler_walls.TwoPhaseFlowPipe.h[4],RMT_RHT.ExchangerWall.Tp[1],RMT_RHT.ExchangerWall.Tp[2],RMT_RHT.ExchangerWall.Tp[3],RMT_RHT.TwoPhaseFlowPipe.P[2],RMT_RHT.TwoPhaseFlowPipe.P[3],RMT_RHT.TwoPhaseFlowPipe.P[4],RMT_RHT.TwoPhaseFlowPipe.Q[2],RMT_RHT.TwoPhaseFlowPipe.Q[3],RMT_RHT.TwoPhaseFlowPipe.Q[4],RMT_RHT.TwoPhaseFlowPipe.h[2],RMT_RHT.TwoPhaseFlowPipe.h[3],RMT_RHT.TwoPhaseFlowPipe.h[4],SBT.ExchangerWall.Tp[1],SBT.ExchangerWall.Tp[2],SBT.ExchangerWall.Tp[3],SBT.TwoPhaseFlowPipe.P[2],SBT.TwoPhaseFlowPipe.P[3],SBT.TwoPhaseFlowPipe.P[4],SBT.TwoPhaseFlowPipe.Q[1],SBT.TwoPhaseFlowPipe.Q[2],SBT.TwoPhaseFlowPipe.Q[3],SBT.TwoPhaseFlowPipe.Q[4],SBT.TwoPhaseFlowPipe.h[2],SBT.TwoPhaseFlowPipe.h[3],SBT.TwoPhaseFlowPipe.h[4],RBT.ExchangerWall.Tp[1],RBT.ExchangerWall.Tp[2],RBT.ExchangerWall.Tp[3],RBT.TwoPhaseFlowPipe.P[2],RBT.TwoPhaseFlowPipe.P[3],RBT.TwoPhaseFlowPipe.P[4],RBT.TwoPhaseFlowPipe.Q[1],RBT.TwoPhaseFlowPipe.Q[2],RBT.TwoPhaseFlowPipe.Q[3],RBT.TwoPhaseFlowPipe.Q[4],RBT.TwoPhaseFlowPipe.h[2],RBT.TwoPhaseFlowPipe.h[3],RBT.TwoPhaseFlowPipe.h[4],Economiseur.ExchangerWall.Tp[1],Economiseur.ExchangerWall.Tp[2],Economiseur.ExchangerWall.Tp[3],Economiseur.TwoPhaseFlowPipe.P[2],Economiseur.TwoPhaseFlowPipe.P[3],Economiseur.TwoPhaseFlowPipe.P[4],Economiseur.TwoPhaseFlowPipe.Q[1],Economiseur.TwoPhaseFlowPipe.Q[2],Economiseur.TwoPhaseFlowPipe.Q[3],Economiseur.TwoPhaseFlowPipe.Q[4],Economiseur.TwoPhaseFlowPipe.h[2],Economiseur.TwoPhaseFlowPipe.h[3],Economiseur.TwoPhaseFlowPipe.h[4],SMT_SHT.ExchangerWall.Tp[1],SMT_SHT.ExchangerWall.Tp[2],SMT_SHT.ExchangerWall.Tp[3],SMT_SHT.TwoPhaseFlowPipe.P[2],SMT_SHT.TwoPhaseFlowPipe.P[3],SMT_SHT.TwoPhaseFlowPipe.P[4],SMT_SHT.TwoPhaseFlowPipe.Q[1],SMT_SHT.TwoPhaseFlowPipe.Q[2],SMT_SHT.TwoPhaseFlowPipe.Q[3],SMT_SHT.TwoPhaseFlowPipe.Q[4],SMT_SHT.TwoPhaseFlowPipe.h[2],SMT_SHT.TwoPhaseFlowPipe.h[3],SMT_SHT.TwoPhaseFlowPipe.h[4],AirPreheater.Xh2o,volumeA1.h,volumeA.P,volumeA.h,TemperatureControl.pIsat.Integrateur1.x,TemperatureControl.pT1_1.x,regulation_Level_Condenser.pIsat.Integrateur1.x,regulation_Level_Condenser.pIsat1.Integrateur1.x,regulation_Level_Condenser.pT1_1.x,regulation_Level_Condenser.pT1_2.x,regulation_Level_Condenser.pT1_3.x,splitter_condenser.h,Pump_VelocityControl.pIsat.Integrateur1.x,Pump_VelocityControl.pT1_1.x,pT1_1.x,volume_HP1.P,volume_HP1.h,volume_HP2.P,volume_HP2.h,volume_HP3.h,volume_HP1Vap.P,volume_HP1Vap.h,volume_HP1Vap1.P,volume_HP1Vap1.h,volume_HP21.P,volume_HP21.h,volume_HP22.P,volume_HP22.h,pT1_3.x,pT1_4.x,pT1_5.x) * Number of discrete variables: 13 ($whenCondition3,$whenCondition2,$whenCondition1,TemperatureControl.pIsat.Integrateur1.x0,regulation_Level_Condenser.pIsat.Integrateur1.x0,regulation_Level_Condenser.pIsat1.Integrateur1.x0,regulation_Level_Condenser.edge.uL.signal,regulation_Level_Condenser.edge.yL.signal,regulation_Level_Condenser.echelon.yL.signal,CheckValve.ouvert,CheckValve.touvert,CheckValve.tferme,Pump_VelocityControl.pIsat.Integrateur1.x0) * Number of discrete states: 5 (CheckValve.touvert,CheckValve.tferme,regulation_Level_Condenser.echelon.yL.signal,regulation_Level_Condenser.edge.yL.signal,regulation_Level_Condenser.edge.uL.signal) * Number of clocked states: 0 () * Top-level inputs: 0 Notification: Strong component statistics for simulation (3203): * Single equations (assignments): 2917 * Array equations: 0 * Algorithm blocks: 2 * Record equations: 168 * When equations: 5 * If-equations: 0 * Equation systems (not torn): 10 * Torn equation systems: 101 * Mixed (continuous/discrete) equation systems: 0 Notification: Equation system details (not torn): * Constant Jacobian (size): 0 systems * Linear Jacobian (size,density): 10 systems {(2,100.0%), (2,100.0%), (2,100.0%), (2,100.0%), (2,100.0%), (2,100.0%), (2,100.0%), (2,100.0%), (2,100.0%), (2,100.0%)} * Non-linear Jacobian (size): 0 systems * Without analytic Jacobian (size): 0 systems Notification: Torn system details for strict tearing set: * Linear torn systems (#iteration vars, #inner vars, density): 42 systems {(4,1,62.5%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (2,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (2,1,100.0%)} * Non-linear torn systems (#iteration vars, #inner vars): 59 systems {(1,2), (1,2), (1,2), (1,2), (1,2), (1,2), (1,4), (1,2), (1,2), (1,2), (1,2), (1,3), (1,5), (1,3), (1,2), (1,2), (1,2), (1,2), (1,3), (1,1), (93,233), (1,6), (3,7), (1,2), (1,2), (1,3), (1,6), (1,6), (1,6), (1,6), (1,34), (1,6), (1,6), (1,6), (1,6), (1,6), (1,3), (1,6), (1,6), (1,6), (2,37), (1,6), (1,6), (1,6), (1,6), (1,6), (1,5), (1,3), (52,195), (23,52), (1,3), (1,26), (1,2), (1,2), (1,1), (1,5), (1,5), (1,3), (23,52)} Notification: Performance of Backend phase and start with SimCode phase: time 0.2887/10.71, allocations: 136 MB / 4.287 GB, free: 9.59 MB / 0.8544 GB Notification: Performance of simCode: created initialization part: time 0.4166/11.12, allocations: 113.8 MB / 4.398 GB, free: 314.2 MB / 0.8544 GB Notification: Performance of simCode: created event and clocks part: time 1.12e-05/11.12, allocations: 0.5469 kB / 4.398 GB, free: 314.2 MB / 0.8544 GB Notification: Performance of simCode: created simulation system equations: time 0.08705/11.21, allocations: 48.68 MB / 4.445 GB, free: 279.5 MB / 0.8544 GB Notification: Performance of simCode: created of all other equations (e.g. parameter, nominal, assert, etc): time 0.06157/11.27, allocations: 13.9 MB / 4.459 GB, free: 266.6 MB / 0.8544 GB Notification: Performance of simCode: created linear, non-linear and system jacobian parts: time 1.384/12.66, allocations: 388.2 MB / 4.838 GB, free: 278.3 MB / 0.8544 GB Notification: Performance of simCode: some other stuff during SimCode phase: time 0.04945/12.71, allocations: 17.3 MB / 4.855 GB, free: 264.3 MB / 0.8544 GB Notification: Performance of simCode: alias equations: time 0.03004/12.74, allocations: 4.749 MB / 4.86 GB, free: 260.4 MB / 0.8544 GB Notification: Performance of simCode: all other stuff during SimCode phase: time 0.02663/12.76, allocations: 16.89 MB / 4.876 GB, free: 243.5 MB / 0.8544 GB Notification: Performance of SimCode: time 1.964e-06/12.76, allocations: 0 / 4.876 GB, free: 243.5 MB / 0.8544 GB Notification: Performance of buildModelFMU: Generate the FMI files: time 2.424/15.19, allocations: 1.273 GB / 6.149 GB, free: 196.5 MB / 0.8544 GB Error: Error building simulator. Build log: cmd: cd '562.fmutmp/sources/' && mkdir build_cmake_static && cd build_cmake_static && cmake -DCMAKE_BUILD_TYPE=Release -DCMAKE_C_COMPILER='clang' .. && cmake --build . --parallel -j1 --target install && cd .. && rm -rf build_cmake_static CMake Warning (deprecated) at CMakeLists.txt:1 (cmake_minimum_required): Compatibility with CMake < 3.10 will be removed from a future version of CMake. Update the VERSION argument value. Or, use the ... syntax to tell CMake that the project requires at least but has been updated to work with policies introduced by or earlier. This warning is for project developers. Use -Wno-author or -Wno-deprecated to suppress it. -- The C compiler identification is Clang 21.1.8 -- Detecting C compiler ABI info -- Detecting C compiler ABI info - done -- Check for working C compiler: /usr/bin/clang - skipped -- Detecting C compile features -- Detecting C compile features - done -- FMI2 include directory: /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/fmi -- Performing Test CMAKE_HAVE_LIBC_PTHREAD -- Performing Test CMAKE_HAVE_LIBC_PTHREAD - Success -- Found Threads: TRUE -- Building for FMI platform linux64 -- Install directory: /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/../binaries/linux64 -- CVODE_DIRECTORY: /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc -- SUNDIALS_CVODE_LIBRARY: /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/lib/x86_64-linux-gnu/omc/libsundials_cvode.so -- SUNDIALS_NVECSERIAL_LIBRARY: /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/lib/x86_64-linux-gnu/omc/libsundials_nvecserial.so -- CVODE: /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/lib/x86_64-linux-gnu/omc/libsundials_nvecserial.so /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/lib/x86_64-linux-gnu/omc/libsundials_cvode.so -- Not using FMI2_FUNCTION_PREFIX -- Installing dynamic dependencies from list: /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/lib/x86_64-linux-gnu/omc/libsundials_cvode.so;/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/lib/x86_64-linux-gnu/omc/libsundials_nvecserial.so CMake Warning (policy) at CMakeLists.txt:244 (install): Policy CMP0177 is not set: install() DESTINATION paths are normalized. Run \"cmake --help-policy CMP0177\" for policy details. Use the cmake_policy command to set the policy and suppress this warning. This warning is for project developers. Use -Wno-author or -Wno-policy to suppress it. CMake Warning (policy) at CMakeLists.txt:244 (install): Policy CMP0177 is not set: install() DESTINATION paths are normalized. Run \"cmake --help-policy CMP0177\" for policy details. Use the cmake_policy command to set the policy and suppress this warning. This warning is for project developers. Use -Wno-author or -Wno-policy to suppress it. CMake Warning (policy) at CMakeLists.txt:244 (install): Policy CMP0177 is not set: install() DESTINATION paths are normalized. Run \"cmake --help-policy CMP0177\" for policy details. Use the cmake_policy command to set the policy and suppress this warning. This warning is for project developers. Use -Wno-author or -Wno-policy to suppress it. CMake Warning (policy) at CMakeLists.txt:244 (install): Policy CMP0177 is not set: install() DESTINATION paths are normalized. Run \"cmake --help-policy CMP0177\" for policy details. Use the cmake_policy command to set the policy and suppress this warning. This warning is for project developers. Use -Wno-author or -Wno-policy to suppress it. -- Configuring done (0.2s) -- Generating done (0.0s) -- Build files have been written to: /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/build_cmake_static [ 0%] Building C object CMakeFiles/562.dir/external_solvers/F77_aloc.c.o [ 1%] Building C object CMakeFiles/562.dir/external_solvers/dgemm.c.o [ 2%] Building C object CMakeFiles/562.dir/external_solvers/dgemv.c.o [ 3%] Building C object CMakeFiles/562.dir/external_solvers/dger.c.o [ 3%] Building C object CMakeFiles/562.dir/external_solvers/dgesv.c.o [ 4%] Building C object CMakeFiles/562.dir/external_solvers/dgetf2.c.o [ 5%] Building C object CMakeFiles/562.dir/external_solvers/dgetrf.c.o [ 6%] Building C object CMakeFiles/562.dir/external_solvers/dgetri.c.o [ 7%] Building C object CMakeFiles/562.dir/external_solvers/dgetrs.c.o [ 7%] Building C object CMakeFiles/562.dir/external_solvers/dlamch.c.o [ 8%] Building C object CMakeFiles/562.dir/external_solvers/dlaswp.c.o [ 9%] Building C object CMakeFiles/562.dir/external_solvers/dogleg_.c.o [ 10%] Building C object CMakeFiles/562.dir/external_solvers/dpmpar_.c.o [ 11%] Building C object CMakeFiles/562.dir/external_solvers/dscal.c.o [ 11%] Building C object CMakeFiles/562.dir/external_solvers/dswap.c.o [ 12%] Building C object CMakeFiles/562.dir/external_solvers/dtrmm.c.o [ 13%] Building C object CMakeFiles/562.dir/external_solvers/dtrmv.c.o [ 14%] Building C object CMakeFiles/562.dir/external_solvers/dtrsm.c.o [ 15%] Building C object CMakeFiles/562.dir/external_solvers/dtrti2.c.o [ 15%] Building C object CMakeFiles/562.dir/external_solvers/dtrtri.c.o [ 16%] Building C object CMakeFiles/562.dir/external_solvers/enorm_.c.o [ 17%] Building C object CMakeFiles/562.dir/external_solvers/exit_.c.o [ 18%] Building C object CMakeFiles/562.dir/external_solvers/hybrj_.c.o [ 19%] Building C object CMakeFiles/562.dir/external_solvers/i_nint.c.o [ 19%] Building C object CMakeFiles/562.dir/external_solvers/idamax.c.o [ 20%] Building C object CMakeFiles/562.dir/external_solvers/ieeeck.c.o [ 21%] Building C object CMakeFiles/562.dir/external_solvers/ilaenv.c.o [ 22%] Building C object CMakeFiles/562.dir/external_solvers/iparmq.c.o [ 23%] Building C object CMakeFiles/562.dir/external_solvers/lsame.c.o [ 23%] Building C object CMakeFiles/562.dir/external_solvers/pow_di.c.o [ 24%] Building C object CMakeFiles/562.dir/external_solvers/qform_.c.o [ 25%] Building C object CMakeFiles/562.dir/external_solvers/qrfac_.c.o [ 26%] Building C object CMakeFiles/562.dir/external_solvers/r1mpyq_.c.o [ 26%] Building C object CMakeFiles/562.dir/external_solvers/r1updt_.c.o [ 27%] Building C object CMakeFiles/562.dir/external_solvers/s_cat.c.o [ 28%] Building C object CMakeFiles/562.dir/external_solvers/s_cmp.c.o [ 29%] Building C object CMakeFiles/562.dir/external_solvers/s_copy.c.o [ 30%] Building C object CMakeFiles/562.dir/external_solvers/xerbla.c.o [ 30%] Building C object CMakeFiles/562.dir/fmi-export/fmu2_model_interface.c.o [ 31%] Building C object CMakeFiles/562.dir/fmi-export/fmu_read_flags.c.o [ 32%] Building C object CMakeFiles/562.dir/gc/memory_pool.c.o [ 33%] Building C object CMakeFiles/562.dir/gc/omc_gc.c.o [ 34%] Building C object CMakeFiles/562.dir/math-support/pivot.c.o [ 34%] Building C object CMakeFiles/562.dir/meta/meta_modelica_catch.c.o [ 35%] Building C object CMakeFiles/562.dir/simulation/arrayIndex.c.o [ 36%] Building C object CMakeFiles/562.dir/simulation/eval_dep.c.o [ 37%] Building C object CMakeFiles/562.dir/simulation/jacobian_util.c.o [ 38%] Building C object CMakeFiles/562.dir/simulation/omc_simulation_util.c.o [ 38%] Building C object CMakeFiles/562.dir/simulation/options.c.o [ 39%] Building C object CMakeFiles/562.dir/simulation/simulation_info_json.c.o [ 40%] Building C object CMakeFiles/562.dir/simulation/simulation_omc_assert.c.o [ 41%] Building C object CMakeFiles/562.dir/simulation/solver/cvode_solver.c.o [ 42%] Building C object CMakeFiles/562.dir/simulation/solver/delay.c.o [ 42%] Building C object CMakeFiles/562.dir/simulation/solver/discrete_changes.c.o [ 43%] Building C object CMakeFiles/562.dir/simulation/solver/initialization/initialization.c.o [ 44%] Building C object CMakeFiles/562.dir/simulation/solver/linearSolverLapack.c.o [ 45%] Building C object CMakeFiles/562.dir/simulation/solver/linearSolverTotalPivot.c.o [ 46%] Building C object CMakeFiles/562.dir/simulation/solver/linearSystem.c.o [ 46%] Building C object CMakeFiles/562.dir/simulation/solver/model_help.c.o [ 47%] Building C object CMakeFiles/562.dir/simulation/solver/nonlinearSolverHomotopy.c.o [ 48%] Building C object CMakeFiles/562.dir/simulation/solver/nonlinearSolverHybrd.c.o [ 49%] Building C object CMakeFiles/562.dir/simulation/solver/nonlinearSystem.c.o [ 50%] Building C object CMakeFiles/562.dir/simulation/solver/nonlinearValuesList.c.o [ 50%] Building C object CMakeFiles/562.dir/simulation/solver/omc_math.c.o [ 51%] Building C object CMakeFiles/562.dir/simulation/solver/spatialDistribution.c.o [ 52%] Building C object CMakeFiles/562.dir/simulation/solver/stateset.c.o [ 53%] Building C object CMakeFiles/562.dir/simulation/solver/sundials_error.c.o [ 53%] Building C object CMakeFiles/562.dir/simulation/solver/synchronous.c.o [ 54%] Building C object CMakeFiles/562.dir/util/ModelicaUtilities.c.o [ 55%] Building C object CMakeFiles/562.dir/util/base_array.c.o [ 56%] Building C object CMakeFiles/562.dir/util/boolean_array.c.o [ 57%] Building C object CMakeFiles/562.dir/util/context.c.o [ 57%] Building C object CMakeFiles/562.dir/util/division.c.o [ 58%] Building C object CMakeFiles/562.dir/util/doubleEndedList.c.o [ 59%] Building C object CMakeFiles/562.dir/util/generic_array.c.o [ 60%] Building C object CMakeFiles/562.dir/util/index_spec.c.o [ 61%] Building C object CMakeFiles/562.dir/util/integer_array.c.o [ 61%] Building C object CMakeFiles/562.dir/util/list.c.o [ 62%] Building C object CMakeFiles/562.dir/util/modelica_string.c.o [ 63%] Building C object CMakeFiles/562.dir/util/modelica_string_lit.c.o [ 64%] Building C object CMakeFiles/562.dir/util/omc_error.c.o [ 65%] Building C object CMakeFiles/562.dir/util/omc_file.c.o [ 65%] Building C object CMakeFiles/562.dir/util/omc_init.c.o [ 66%] Building C object CMakeFiles/562.dir/util/omc_mmap.c.o [ 67%] Building C object CMakeFiles/562.dir/util/omc_msvc.c.o [ 68%] Building C object CMakeFiles/562.dir/util/omc_numbers.c.o [ 69%] Building C object CMakeFiles/562.dir/util/parallel_helper.c.o [ 69%] Building C object CMakeFiles/562.dir/util/rational.c.o [ 70%] Building C object CMakeFiles/562.dir/util/real_array.c.o [ 71%] Building C object CMakeFiles/562.dir/util/ringbuffer.c.o [ 72%] Building C object CMakeFiles/562.dir/util/simulation_options.c.o [ 73%] Building C object CMakeFiles/562.dir/util/string_array.c.o [ 73%] Building C object CMakeFiles/562.dir/util/utility.c.o [ 74%] Building C object CMakeFiles/562.dir/util/varinfo.c.o [ 75%] Building C object CMakeFiles/562.dir/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant.c.o [ 76%] Building C object CMakeFiles/562.dir/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_01exo.c.o [ 76%] Building C object CMakeFiles/562.dir/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_02nls.c.o [ 77%] Building C object CMakeFiles/562.dir/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_02nls_part0.c.o [ 78%] Building C object CMakeFiles/562.dir/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_02nls_part1.c.o [ 79%] Building C object CMakeFiles/562.dir/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_03lsy.c.o [ 80%] Building C object CMakeFiles/562.dir/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_04set.c.o [ 80%] Building C object CMakeFiles/562.dir/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_05evt.c.o [ 81%] Building C object CMakeFiles/562.dir/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_06inz.c.o [ 82%] Building C object CMakeFiles/562.dir/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_06inz_part2.c.o [ 83%] Building C object CMakeFiles/562.dir/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_06inz_part3.c.o [ 84%] Building C object CMakeFiles/562.dir/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_06inz_part4.c.o [ 84%] Building C object CMakeFiles/562.dir/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_07dly.c.o [ 85%] Building C object CMakeFiles/562.dir/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_08bnd.c.o [ 86%] Building C object CMakeFiles/562.dir/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_08bnd_part5.c.o [ 87%] Building C object CMakeFiles/562.dir/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_08bnd_part6.c.o [ 88%] Building C object CMakeFiles/562.dir/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_08bnd_part7.c.o [ 88%] Building C object CMakeFiles/562.dir/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_09alg.c.o [ 89%] Building C object CMakeFiles/562.dir/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_10asr.c.o [ 90%] Building C object CMakeFiles/562.dir/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_11mix.c.o [ 91%] Building C object CMakeFiles/562.dir/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_12jac.c.o [ 92%] Building C object CMakeFiles/562.dir/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_13opt.c.o [ 92%] Building C object CMakeFiles/562.dir/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_14lnz.c.o [ 93%] Building C object CMakeFiles/562.dir/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_15syn.c.o [ 94%] Building C object CMakeFiles/562.dir/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_16dae.c.o [ 95%] Building C object CMakeFiles/562.dir/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_17inl.c.o [ 96%] Building C object CMakeFiles/562.dir/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_18spd.c.o [ 96%] Building C object CMakeFiles/562.dir/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_FMU.c.o [ 97%] Building C object CMakeFiles/562.dir/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c.o /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:237:331: error: invalid operands to binary expression ('modelica_real' (aka 'double') and 'real_array' (aka 'struct base_array_s')) 237 | __omcQ_24ThermoSysPro_24PProperties_24PFlueGases_24PFlueGases_5Fh_24funDERh = (__omcQ_24ThermoSysPro_24PProperties_24PFlueGases_24PFlueGases_5Fh_24funDERstate._T) * (omc__omcQ_24DER_24ThermoSysPro_24PProperties_24PModelicaMediaFlueGases_24Ph_5F_5FTX(threadData, _state._T, _state._X, 1 /* true */, 1, 0.0, 1.0, _OMC_LIT8, 0.0)) + mul_alloc_real_array_scalar(__omcQ_24ThermoSysPro_24PProperties_24PFlueGases_24PFlueGases_5Fh_24funDERstate._X, omc__omcQ_24DER_24ThermoSysPro_24PProperties_24PModelicaMediaFlueGases_24Ph_5F_5FTX(threadData, _state._T, _state._X, 1 /* true */, 1, 0.0, 0.0, _OMC_LIT9, 0.0)) + (__omcQ_24ThermoSysPro_24PProperties_24PFlueGases_24PFlueGases_5Fh_24funDERXh2o) * (_Hlat) - (mul_alloc_real_array_scalar(__omcQ_24ThermoSysPro_24PProperties_24PFlueGases_24PFlueGases_5Fh_24funDERstate0._X, omc__omcQ_24DER_24ThermoSysPro_24PProperties_24PModelicaMediaFlueGases_24Ph_5F_5FTX(threadData, _state0._T, _state0._X, 1 /* true */, 1, 0.0, 0.0, _OMC_LIT9, 0.0))) - ((__omcQ_24ThermoSysPro_24PProperties_24PFlueGases_24PFlueGases_5Fh_24funDERstate0._T) * (omc__omcQ_24DER_24ThermoSysPro_24PProperties_24PModelicaMediaFlueGases_24Ph_5F_5FTX(threadData, _state0._T, _state0._X, 1 /* true */, 1, 0.0, 1.0, _OMC_LIT8, 0.0))); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1100:31: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 1100 | if((_option_interpolation == ((modelica_integer) 1))) | ~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1100:31: note: remove extraneous parentheses around the comparison to silence this warning 1100 | if((_option_interpolation == ((modelica_integer) 1))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1100:31: note: use '=' to turn this equality comparison into an assignment 1100 | if((_option_interpolation == ((modelica_integer) 1))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1106:33: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 1106 | if((_option_interpolation == ((modelica_integer) 2))) | ~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1106:33: note: remove extraneous parentheses around the comparison to silence this warning 1106 | if((_option_interpolation == ((modelica_integer) 2))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1106:33: note: use '=' to turn this equality comparison into an assignment 1106 | if((_option_interpolation == ((modelica_integer) 2))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1315:29: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 1315 | if((_option_interpolation == ((modelica_integer) 1))) | ~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1315:29: note: remove extraneous parentheses around the comparison to silence this warning 1315 | if((_option_interpolation == ((modelica_integer) 1))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1315:29: note: use '=' to turn this equality comparison into an assignment 1315 | if((_option_interpolation == ((modelica_integer) 1))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1321:31: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 1321 | if((_option_interpolation == ((modelica_integer) 2))) | ~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1321:31: note: remove extraneous parentheses around the comparison to silence this warning 1321 | if((_option_interpolation == ((modelica_integer) 2))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1321:31: note: use '=' to turn this equality comparison into an assignment 1321 | if((_option_interpolation == ((modelica_integer) 2))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1527:31: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 1527 | if((_option_interpolation == ((modelica_integer) 1))) | ~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1527:31: note: remove extraneous parentheses around the comparison to silence this warning 1527 | if((_option_interpolation == ((modelica_integer) 1))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1527:31: note: use '=' to turn this equality comparison into an assignment 1527 | if((_option_interpolation == ((modelica_integer) 1))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1533:33: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 1533 | if((_option_interpolation == ((modelica_integer) 2))) | ~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1533:33: note: remove extraneous parentheses around the comparison to silence this warning 1533 | if((_option_interpolation == ((modelica_integer) 2))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1533:33: note: use '=' to turn this equality comparison into an assignment 1533 | if((_option_interpolation == ((modelica_integer) 2))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1553:31: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 1553 | if((_option_interpolation == ((modelica_integer) 1))) | ~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1553:31: note: remove extraneous parentheses around the comparison to silence this warning 1553 | if((_option_interpolation == ((modelica_integer) 1))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1553:31: note: use '=' to turn this equality comparison into an assignment 1553 | if((_option_interpolation == ((modelica_integer) 1))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1559:33: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 1559 | if((_option_interpolation == ((modelica_integer) 2))) | ~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1559:33: note: remove extraneous parentheses around the comparison to silence this warning 1559 | if((_option_interpolation == ((modelica_integer) 2))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1559:33: note: use '=' to turn this equality comparison into an assignment 1559 | if((_option_interpolation == ((modelica_integer) 2))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1740:15: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 1740 | if((_IndX == _dimX)) | ~~~~~~^~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1740:15: note: remove extraneous parentheses around the comparison to silence this warning 1740 | if((_IndX == _dimX)) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1740:15: note: use '=' to turn this equality comparison into an assignment 1740 | if((_IndX == _dimX)) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1751:15: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 1751 | if((_IndX == ((modelica_integer) 2))) | ~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1751:15: note: remove extraneous parentheses around the comparison to silence this warning 1751 | if((_IndX == ((modelica_integer) 2))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1751:15: note: use '=' to turn this equality comparison into an assignment 1751 | if((_IndX == ((modelica_integer) 2))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3318:14: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 3318 | if((_fluid == ((modelica_integer) 1))) | ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3318:14: note: remove extraneous parentheses around the comparison to silence this warning 3318 | if((_fluid == ((modelica_integer) 1))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3318:14: note: use '=' to turn this equality comparison into an assignment 3318 | if((_fluid == ((modelica_integer) 1))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3325:16: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 3325 | if((_fluid == ((modelica_integer) 2))) | ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3325:16: note: remove extraneous parentheses around the comparison to silence this warning 3325 | if((_fluid == ((modelica_integer) 2))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3325:16: note: use '=' to turn this equality comparison into an assignment 3325 | if((_fluid == ((modelica_integer) 2))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3332:18: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 3332 | if((_fluid == ((modelica_integer) 7))) | ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3332:18: note: remove extraneous parentheses around the comparison to silence this warning 3332 | if((_fluid == ((modelica_integer) 7))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3332:18: note: use '=' to turn this equality comparison into an assignment 3332 | if((_fluid == ((modelica_integer) 7))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3401:14: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 3401 | if((_fluid == ((modelica_integer) 1))) | ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3401:14: note: remove extraneous parentheses around the comparison to silence this warning 3401 | if((_fluid == ((modelica_integer) 1))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3401:14: note: use '=' to turn this equality comparison into an assignment 3401 | if((_fluid == ((modelica_integer) 1))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3408:16: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 3408 | if((_fluid == ((modelica_integer) 2))) | ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3408:16: note: remove extraneous parentheses around the comparison to silence this warning 3408 | if((_fluid == ((modelica_integer) 2))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3408:16: note: use '=' to turn this equality comparison into an assignment 3408 | if((_fluid == ((modelica_integer) 2))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3415:18: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 3415 | if((_fluid == ((modelica_integer) 7))) | ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3415:18: note: remove extraneous parentheses around the comparison to silence this warning 3415 | if((_fluid == ((modelica_integer) 7))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3415:18: note: use '=' to turn this equality comparison into an assignment 3415 | if((_fluid == ((modelica_integer) 7))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:35864:16: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 35864 | if((_phase == ((modelica_integer) 2))) | ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:35864:16: note: remove extraneous parentheses around the comparison to silence this warning 35864 | if((_phase == ((modelica_integer) 2))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:35864:16: note: use '=' to turn this equality comparison into an assignment 35864 | if((_phase == ((modelica_integer) 2))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:35882:24: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 35882 | if((_phase == ((modelica_integer) 1))) | ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:35882:24: note: remove extraneous parentheses around the comparison to silence this warning 35882 | if((_phase == ((modelica_integer) 1))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:35882:24: note: use '=' to turn this equality comparison into an assignment 35882 | if((_phase == ((modelica_integer) 1))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:35913:26: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 35913 | if((_phase == ((modelica_integer) 1))) | ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:35913:26: note: remove extraneous parentheses around the comparison to silence this warning 35913 | if((_phase == ((modelica_integer) 1))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:35913:26: note: use '=' to turn this equality comparison into an assignment 35913 | if((_phase == ((modelica_integer) 1))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39375:15: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 39375 | if((_region == ((modelica_integer) 1))) | ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39375:15: note: remove extraneous parentheses around the comparison to silence this warning 39375 | if((_region == ((modelica_integer) 1))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39375:15: note: use '=' to turn this equality comparison into an assignment 39375 | if((_region == ((modelica_integer) 1))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39387:17: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 39387 | if((_region == ((modelica_integer) 2))) | ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39387:17: note: remove extraneous parentheses around the comparison to silence this warning 39387 | if((_region == ((modelica_integer) 2))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39387:17: note: use '=' to turn this equality comparison into an assignment 39387 | if((_region == ((modelica_integer) 2))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39399:19: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 39399 | if((_region == ((modelica_integer) 3))) | ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39399:19: note: remove extraneous parentheses around the comparison to silence this warning 39399 | if((_region == ((modelica_integer) 3))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39399:19: note: use '=' to turn this equality comparison into an assignment 39399 | if((_region == ((modelica_integer) 3))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39413:21: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 39413 | if((_region == ((modelica_integer) 5))) | ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39413:21: note: remove extraneous parentheses around the comparison to silence this warning 39413 | if((_region == ((modelica_integer) 5))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39413:21: note: use '=' to turn this equality comparison into an assignment 39413 | if((_region == ((modelica_integer) 5))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39517:15: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 39517 | if((_region == ((modelica_integer) 1))) | ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39517:15: note: remove extraneous parentheses around the comparison to silence this warning 39517 | if((_region == ((modelica_integer) 1))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39517:15: note: use '=' to turn this equality comparison into an assignment 39517 | if((_region == ((modelica_integer) 1))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39531:17: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 39531 | if((_region == ((modelica_integer) 2))) | ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39531:17: note: remove extraneous parentheses around the comparison to silence this warning 39531 | if((_region == ((modelica_integer) 2))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39531:17: note: use '=' to turn this equality comparison into an assignment 39531 | if((_region == ((modelica_integer) 2))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39545:19: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 39545 | if((_region == ((modelica_integer) 3))) | ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39545:19: note: remove extraneous parentheses around the comparison to silence this warning 39545 | if((_region == ((modelica_integer) 3))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39545:19: note: use '=' to turn this equality comparison into an assignment 39545 | if((_region == ((modelica_integer) 3))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39566:21: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 39566 | if((_region == ((modelica_integer) 4))) | ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39566:21: note: remove extraneous parentheses around the comparison to silence this warning 39566 | if((_region == ((modelica_integer) 4))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39566:21: note: use '=' to turn this equality comparison into an assignment 39566 | if((_region == ((modelica_integer) 4))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39573:23: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 39573 | if((_region == ((modelica_integer) 5))) | ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39573:23: note: remove extraneous parentheses around the comparison to silence this warning 39573 | if((_region == ((modelica_integer) 5))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39573:23: note: use '=' to turn this equality comparison into an assignment 39573 | if((_region == ((modelica_integer) 5))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39680:15: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 39680 | if((_region == ((modelica_integer) 1))) | ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39680:15: note: remove extraneous parentheses around the comparison to silence this warning 39680 | if((_region == ((modelica_integer) 1))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39680:15: note: use '=' to turn this equality comparison into an assignment 39680 | if((_region == ((modelica_integer) 1))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39694:17: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 39694 | if((_region == ((modelica_integer) 2))) | ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39694:17: note: remove extraneous parentheses around the comparison to silence this warning 39694 | if((_region == ((modelica_integer) 2))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39694:17: note: use '=' to turn this equality comparison into an assignment 39694 | if((_region == ((modelica_integer) 2))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39708:19: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 39708 | if((_region == ((modelica_integer) 3))) | ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39708:19: note: remove extraneous parentheses around the comparison to silence this warning 39708 | if((_region == ((modelica_integer) 3))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39708:19: note: use '=' to turn this equality comparison into an assignment 39708 | if((_region == ((modelica_integer) 3))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39722:21: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 39722 | if((_region == ((modelica_integer) 4))) | ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39722:21: note: remove extraneous parentheses around the comparison to silence this warning 39722 | if((_region == ((modelica_integer) 4))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39722:21: note: use '=' to turn this equality comparison into an assignment 39722 | if((_region == ((modelica_integer) 4))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39729:23: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 39729 | if((_region == ((modelica_integer) 5))) | ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39729:23: note: remove extraneous parentheses around the comparison to silence this warning 39729 | if((_region == ((modelica_integer) 5))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39729:23: note: use '=' to turn this equality comparison into an assignment 39729 | if((_region == ((modelica_integer) 5))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39898:15: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 39898 | if((_region == ((modelica_integer) 1))) | ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39898:15: note: remove extraneous parentheses around the comparison to silence this warning 39898 | if((_region == ((modelica_integer) 1))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39898:15: note: use '=' to turn this equality comparison into an assignment 39898 | if((_region == ((modelica_integer) 1))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39910:17: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 39910 | if((_region == ((modelica_integer) 2))) | ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39910:17: note: remove extraneous parentheses around the comparison to silence this warning 39910 | if((_region == ((modelica_integer) 2))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39910:17: note: use '=' to turn this equality comparison into an assignment 39910 | if((_region == ((modelica_integer) 2))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39922:19: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 39922 | if((_region == ((modelica_integer) 3))) | ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39922:19: note: remove extraneous parentheses around the comparison to silence this warning 39922 | if((_region == ((modelica_integer) 3))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39922:19: note: use '=' to turn this equality comparison into an assignment 39922 | if((_region == ((modelica_integer) 3))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39936:21: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 39936 | if((_region == ((modelica_integer) 5))) | ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39936:21: note: remove extraneous parentheses around the comparison to silence this warning 39936 | if((_region == ((modelica_integer) 5))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39936:21: note: use '=' to turn this equality comparison into an assignment 39936 | if((_region == ((modelica_integer) 5))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:40678:18: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 40678 | if((_phase == ((modelica_integer) 2))) | ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:40678:18: note: remove extraneous parentheses around the comparison to silence this warning 40678 | if((_phase == ((modelica_integer) 2))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:40678:18: note: use '=' to turn this equality comparison into an assignment 40678 | if((_phase == ((modelica_integer) 2))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:40757:18: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 40757 | if((_phase == ((modelica_integer) 2))) | ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:40757:18: note: remove extraneous parentheses around the comparison to silence this warning 40757 | if((_phase == ((modelica_integer) 2))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:40757:18: note: use '=' to turn this equality comparison into an assignment 40757 | if((_phase == ((modelica_integer) 2))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42202:15: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 42202 | if((_region == ((modelica_integer) 1))) | ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42202:15: note: remove extraneous parentheses around the comparison to silence this warning 42202 | if((_region == ((modelica_integer) 1))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42202:15: note: use '=' to turn this equality comparison into an assignment 42202 | if((_region == ((modelica_integer) 1))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42209:17: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 42209 | if((_region == ((modelica_integer) 2))) | ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42209:17: note: remove extraneous parentheses around the comparison to silence this warning 42209 | if((_region == ((modelica_integer) 2))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42209:17: note: use '=' to turn this equality comparison into an assignment 42209 | if((_region == ((modelica_integer) 2))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42216:19: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 42216 | if((_region == ((modelica_integer) 4))) | ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42216:19: note: remove extraneous parentheses around the comparison to silence this warning 42216 | if((_region == ((modelica_integer) 4))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42216:19: note: use '=' to turn this equality comparison into an assignment 42216 | if((_region == ((modelica_integer) 4))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42293:15: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 42293 | if((_region == ((modelica_integer) 1))) | ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42293:15: note: remove extraneous parentheses around the comparison to silence this warning 42293 | if((_region == ((modelica_integer) 1))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42293:15: note: use '=' to turn this equality comparison into an assignment 42293 | if((_region == ((modelica_integer) 1))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42300:17: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 42300 | if((_region == ((modelica_integer) 2))) | ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42300:17: note: remove extraneous parentheses around the comparison to silence this warning 42300 | if((_region == ((modelica_integer) 2))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42300:17: note: use '=' to turn this equality comparison into an assignment 42300 | if((_region == ((modelica_integer) 2))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42307:19: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 42307 | if((_region == ((modelica_integer) 4))) | ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42307:19: note: remove extraneous parentheses around the comparison to silence this warning 42307 | if((_region == ((modelica_integer) 4))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/562.fmutmp/sources/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42307:19: note: use '=' to turn this equality comparison into an assignment 42307 | if((_region == ((modelica_integer) 4))) | ^~ | = 45 warnings and 1 error generated. gmake[2]: *** [CMakeFiles/562.dir/build.make:1787: CMakeFiles/562.dir/ThermoSysPro_ThermoSysPro_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c.o] Error 1 gmake[1]: *** [CMakeFiles/Makefile2:88: CMakeFiles/562.dir/all] Error 2 gmake: *** [Makefile:136: all] Error 2 " [Timeout remaining time 599] [Calling sys.exit(0), Time elapsed: 62.35596531443298]