(cd run_OMSimulator-cs-cvode && /home/hudson/saved_omc/OMSimulator/install/bin/OMSimulator --resultFile=../Buildings_latest_Buildings.Fluid.Storage.Ice.Validation.ExperimentNIST.Discharging3_OMSimulator-cs-cvode_res.mat --stripRoot --tempDir=temp_Buildings_latest_Buildings_Fluid_Storage_Ice_Validation_ExperimentNIST_Discharging3_OMSimulator-cs-cvode_fmu --startTime=0 --stopTime=19950 --stepSize=4.44519 --mode=cs --timeout=240 --tolerance=1e-06 ../Buildings_latest_Buildings_Fluid_Storage_Ice_Validation_ExperimentNIST_Discharging3_OMSimulator-cs-cvode.fmu) LOG_SOLVER | info | CVODE linear multistep method CV_BDF LOG_SOLVER | info | CVODE maximum integration order CV_ITER_NEWTON LOG_SOLVER | info | CVODE use equidistant time grid YES LOG_SOLVER | info | CVODE Using relative error tolerance 1.000000e-06 LOG_SOLVER | info | CVODE Using dense internal linear solver SUNLinSol_Dense. LOG_SOLVER | info | CVODE Use internal dense numeric jacobian method. LOG_SOLVER | info | CVODE uses internal root finding method NO LOG_SOLVER | info | CVODE maximum absolut step size 0 LOG_SOLVER | info | CVODE initial step size is set automatically LOG_SOLVER | info | CVODE maximum integration order 5 LOG_SOLVER | info | CVODE maximum number of nonlinear convergence failures permitted during one step 10 LOG_SOLVER | info | CVODE BDF stability limit detection algorithm OFF info: *** FMU Simulation Info *** - model : Buildings.Fluid.Storage.Ice.Validation.ExperimentNIST.Discharging3 (co-simulation) - fmiVersion: 2.0 - startTime : 0.000000 - stopTime : 19950.000000 - tolerance : 1e-06 - stepSize : 4.44519 LOG_STDOUT | info | ... loading "tab" from "/tmp/tmpmnqydc6i/Discharging3-3nxd63gq/temp/0001_Discharging3/resources/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 15.0.0-master/Resources/Data/Fluid/Storage/Ice/Validation/Experiment/discharging3.txt" info: Result file: ../Buildings_latest_Buildings.Fluid.Storage.Ice.Validation.ExperimentNIST.Discharging3_OMSimulator-cs-cvode_res.mat (bufferSize=10) info: Parameter Discharging3.dat.delimiter will not be stored in the result file, because the signal type is not supported info: Variable Discharging3.dat.fileName will not be stored in the result file, because the signal type is not supported info: Parameter Discharging3.dat.tableName will not be stored in the result file, because the signal type is not supported