Running: ./testmodel.py --libraries=/home/hudson/saved_omc/libraries/.openmodelica/libraries --ompython_omhome=/usr ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant.conf.json
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/package.mo", uses=false) [Timeout 180]
"Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/package.mo): time 0.8794/0.8794, allocations: 153.8 MB / 172.7 MB, free: 4.867 MB / 142.1 MB
"
[Timeout remaining time 179]
Using package ThermoSysPro with version 4.1 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/package.mo)
Running command: "" <> buildModelFMU(ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant,fileNamePrefix="ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant",fmuType="me",version="2.0",platforms={"static"})
"" <> buildModelFMU(ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant,fileNamePrefix="ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant",fmuType="me",version="2.0",platforms={"static"}) [Timeout 660]
"Notification: Performance of FrontEnd - loaded program: time 0.0004999/0.0004999, allocations: 15.97 kB / 249.8 MB, free: 4.32 MB / 206.1 MB
Notification: Performance of FrontEnd - Absyn->SCode: time 0.1752/0.1757, allocations: 33.35 MB / 283.2 MB, free: 1.73 MB / 222.1 MB
Notification: Automatically loaded package Complex 4.1.0 due to uses annotation from Modelica.
Notification: Automatically loaded package ModelicaServices 4.1.0 due to uses annotation from Modelica.
Notification: Automatically loaded package Modelica 4.1.0 due to usage.
Notification: Performance of NFInst.instantiate(ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant): time 1.961/2.137, allocations: 376.9 MB / 0.6446 GB, free: 15.68 MB / 0.5137 GB
Notification: Performance of NFInst.instExpressions: time 0.6365/2.774, allocations: 200.2 MB / 0.8401 GB, free: 2.117 MB / 0.6856 GB
Notification: Performance of NFInst.updateImplicitVariability: time 0.01537/2.789, allocations: 183.3 kB / 0.8403 GB, free: 2.117 MB / 0.6856 GB
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:59:3-61:16:writable] Warning: Connector Ce is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:62:3-63:52:writable] Warning: Connector Cs is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:67:3-71:23:writable] Warning: Connector M is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeD.mo:29:3-31:42:writable] Warning: Connector Ce is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeD.mo:32:3-34:37:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeD.mo:35:3-37:43:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeD.mo:38:3-40:37:writable] Warning: Connector Cs3 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:59:3-61:16:writable] Warning: Connector Ce is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:62:3-63:52:writable] Warning: Connector Cs is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:67:3-71:23:writable] Warning: Connector M is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:59:3-61:16:writable] Warning: Connector Ce is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:62:3-63:52:writable] Warning: Connector Cs is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:67:3-71:23:writable] Warning: Connector M is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:59:3-61:16:writable] Warning: Connector Ce is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:62:3-63:52:writable] Warning: Connector Cs is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:67:3-71:23:writable] Warning: Connector M is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:59:3-61:16:writable] Warning: Connector Ce is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:62:3-63:52:writable] Warning: Connector Cs is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:67:3-71:23:writable] Warning: Connector M is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:59:3-61:16:writable] Warning: Connector Ce is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:62:3-63:52:writable] Warning: Connector Cs is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:67:3-71:23:writable] Warning: Connector M is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:59:3-61:16:writable] Warning: Connector Ce is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:62:3-63:52:writable] Warning: Connector Cs is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:67:3-71:23:writable] Warning: Connector M is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:59:3-61:16:writable] Warning: Connector Ce is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:62:3-63:52:writable] Warning: Connector Cs is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:67:3-71:23:writable] Warning: Connector M is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:25:3-27:42:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:28:3-30:37:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:31:3-33:37:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:38:3-40:43:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:25:3-27:42:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:28:3-30:37:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:31:3-33:37:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:38:3-40:43:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:35:3-37:42:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:38:3-40:37:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:25:3-27:42:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:28:3-30:37:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:31:3-33:37:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:38:3-40:43:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:25:3-27:42:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:28:3-30:37:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:31:3-33:37:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:38:3-40:43:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:35:3-37:42:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:38:3-40:37:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:25:3-27:42:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:28:3-30:37:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:31:3-33:37:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:38:3-40:43:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:35:3-37:42:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:38:3-40:37:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:25:3-27:42:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:28:3-30:37:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:31:3-33:37:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:38:3-40:43:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:35:3-37:42:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:38:3-40:37:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/BoundaryConditions/SinkP.mo:33:3-34:47:writable] Warning: Connector C is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/BoundaryConditions/SourceQ.mo:24:3-25:52:writable] Warning: Connector C is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:35:3-37:42:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:38:3-40:37:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/SimpleDynamicCondenser.mo:89:3-90:45:writable] Warning: Connector Cv is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/SimpleDynamicCondenser.mo:91:3-92:46:writable] Warning: Connector Cl is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/SimpleDynamicCondenser.mo:99:3-100:48:writable] Warning: Connector Cee is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/SimpleDynamicCondenser.mo:101:3-102:43:writable] Warning: Connector Cse is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StaticCentrifugalPump.mo:60:3-62:42:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StaticCentrifugalPump.mo:63:3-65:37:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/StaticWaterWaterExchangerDTorWorEff.mo:69:3-71:37:writable] Warning: Connector Ec is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/StaticWaterWaterExchangerDTorWorEff.mo:72:3-74:42:writable] Warning: Connector Ef is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/StaticWaterWaterExchangerDTorWorEff.mo:75:3-77:37:writable] Warning: Connector Sf is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/StaticWaterWaterExchangerDTorWorEff.mo:78:3-80:36:writable] Warning: Connector Sc is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:65:3-67:38:writable] Warning: Connector Ee is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:68:3-70:36:writable] Warning: Connector Se is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:71:3-73:37:writable] Warning: Connector Ep is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:74:3-76:38:writable] Warning: Connector Sp is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:77:3-79:36:writable] Warning: Connector Ev is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:65:3-67:38:writable] Warning: Connector Ee is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:68:3-70:36:writable] Warning: Connector Se is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:71:3-73:37:writable] Warning: Connector Ep is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:74:3-76:38:writable] Warning: Connector Sp is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:77:3-79:36:writable] Warning: Connector Ev is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:65:3-67:38:writable] Warning: Connector Ee is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:68:3-70:36:writable] Warning: Connector Se is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:71:3-73:37:writable] Warning: Connector Ep is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:74:3-76:38:writable] Warning: Connector Sp is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:77:3-79:36:writable] Warning: Connector Ev is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:65:3-67:38:writable] Warning: Connector Ee is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:68:3-70:36:writable] Warning: Connector Se is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:71:3-73:37:writable] Warning: Connector Ep is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:74:3-76:38:writable] Warning: Connector Sp is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:77:3-79:36:writable] Warning: Connector Ev is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:35:3-37:42:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:38:3-40:37:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeI.mo:28:3-30:67:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeI.mo:31:3-33:68:writable] Warning: Connector Ce3 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeI.mo:34:3-36:67:writable] Warning: Connector Ce4 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeI.mo:37:3-39:74:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeI.mo:40:3-42:73:writable] Warning: Connector Cs4 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeI.mo:43:3-45:72:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeI.mo:46:3-48:73:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeI.mo:49:3-51:74:writable] Warning: Connector Cs3 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:35:3-37:42:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:38:3-40:37:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeI.mo:28:3-30:67:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeI.mo:31:3-33:68:writable] Warning: Connector Ce3 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeI.mo:34:3-36:67:writable] Warning: Connector Ce4 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeI.mo:37:3-39:74:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeI.mo:40:3-42:73:writable] Warning: Connector Cs4 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeI.mo:43:3-45:72:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeI.mo:46:3-48:73:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeI.mo:49:3-51:74:writable] Warning: Connector Cs3 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StaticCentrifugalPump.mo:60:3-62:42:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StaticCentrifugalPump.mo:63:3-65:37:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:65:3-67:38:writable] Warning: Connector Ee is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:68:3-70:36:writable] Warning: Connector Se is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:71:3-73:37:writable] Warning: Connector Ep is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:74:3-76:38:writable] Warning: Connector Sp is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:77:3-79:36:writable] Warning: Connector Ev is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:35:3-37:42:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:38:3-40:37:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:65:3-67:38:writable] Warning: Connector Ee is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:68:3-70:36:writable] Warning: Connector Se is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:71:3-73:37:writable] Warning: Connector Ep is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:74:3-76:38:writable] Warning: Connector Sp is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:77:3-79:36:writable] Warning: Connector Ev is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:35:3-37:42:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:38:3-40:37:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:65:3-67:38:writable] Warning: Connector Ee is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:68:3-70:36:writable] Warning: Connector Se is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:71:3-73:37:writable] Warning: Connector Ep is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:74:3-76:38:writable] Warning: Connector Sp is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:77:3-79:36:writable] Warning: Connector Ev is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/StaticWaterWaterExchangerDTorWorEff.mo:69:3-71:37:writable] Warning: Connector Ec is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/StaticWaterWaterExchangerDTorWorEff.mo:72:3-74:42:writable] Warning: Connector Ef is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/StaticWaterWaterExchangerDTorWorEff.mo:75:3-77:37:writable] Warning: Connector Sf is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/StaticWaterWaterExchangerDTorWorEff.mo:78:3-80:36:writable] Warning: Connector Sc is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:35:3-37:42:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:38:3-40:37:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:35:3-37:42:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:38:3-40:37:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:59:3-61:16:writable] Warning: Connector Ce is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:62:3-63:52:writable] Warning: Connector Cs is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:67:3-71:23:writable] Warning: Connector M is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeD.mo:29:3-31:42:writable] Warning: Connector Ce is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeD.mo:32:3-34:37:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeD.mo:35:3-37:43:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeD.mo:38:3-40:37:writable] Warning: Connector Cs3 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Sensors/SensorT.mo:28:3-30:43:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Sensors/SensorT.mo:31:3-33:38:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/ControlValve.mo:45:3-47:43:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/ControlValve.mo:48:3-50:38:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/ControlValve.mo:45:3-47:43:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/ControlValve.mo:48:3-50:38:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/Combustion/CombustionChambers/GenericCombustion1D.mo:116:3-118:24:writable] Warning: Connector Cfuel is not balanced: The number of potential variables (14) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/Combustion/CombustionChambers/GenericCombustion1D.mo:119:3-121:16:writable] Warning: Connector Ca is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/Combustion/CombustionChambers/GenericCombustion1D.mo:122:3-123:83:writable] Warning: Connector Cfg is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/Combustion/CombustionChambers/GenericCombustion1D.mo:124:3-126:17:writable] Warning: Connector Cws is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/DynamicOnePhaseFlowPipe.mo:115:3-116:48:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/DynamicOnePhaseFlowPipe.mo:117:3-118:46:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/FlueGases/Junctions/Splitter2.mo:24:3-26:16:writable] Warning: Connector Ce is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/FlueGases/Junctions/Splitter2.mo:27:3-28:82:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/FlueGases/Junctions/Splitter2.mo:29:3-31:17:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/FlueGases/HeatExchangers/StaticWallFlueGasesExchanger.mo:89:3-91:16:writable] Warning: Connector C1 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/FlueGases/HeatExchangers/StaticWallFlueGasesExchanger.mo:94:3-95:83:writable] Warning: Connector C2 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/DynamicTwoPhaseFlowPipe.mo:184:3-185:48:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/DynamicTwoPhaseFlowPipe.mo:188:3-189:46:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:35:3-36:82:writable] Warning: Connector Cfg1 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:37:3-39:17:writable] Warning: Connector Cfg2 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:40:3-42:16:writable] Warning: Connector Cws1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:43:3-44:83:writable] Warning: Connector Cws2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/FlueGases/BoundaryConditions/Sink.mo:15:3-17:16:writable] Warning: Connector C is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/FlueGases/HeatExchangers/StaticWallFlueGasesExchanger.mo:89:3-91:16:writable] Warning: Connector C1 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/FlueGases/HeatExchangers/StaticWallFlueGasesExchanger.mo:94:3-95:83:writable] Warning: Connector C2 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/DynamicTwoPhaseFlowPipe.mo:184:3-185:48:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/DynamicTwoPhaseFlowPipe.mo:188:3-189:46:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:35:3-36:82:writable] Warning: Connector Cfg1 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:37:3-39:17:writable] Warning: Connector Cfg2 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:40:3-42:16:writable] Warning: Connector Cws1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:43:3-44:83:writable] Warning: Connector Cws2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/FlueGases/HeatExchangers/StaticWallFlueGasesExchanger.mo:89:3-91:16:writable] Warning: Connector C1 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/FlueGases/HeatExchangers/StaticWallFlueGasesExchanger.mo:94:3-95:83:writable] Warning: Connector C2 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/DynamicTwoPhaseFlowPipe.mo:184:3-185:48:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/DynamicTwoPhaseFlowPipe.mo:188:3-189:46:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:35:3-36:82:writable] Warning: Connector Cfg1 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:37:3-39:17:writable] Warning: Connector Cfg2 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:40:3-42:16:writable] Warning: Connector Cws1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:43:3-44:83:writable] Warning: Connector Cws2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/SingularPressureLoss.mo:25:3-27:16:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/SingularPressureLoss.mo:28:3-29:52:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/FlueGases/HeatExchangers/StaticWallFlueGasesExchanger.mo:89:3-91:16:writable] Warning: Connector C1 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/FlueGases/HeatExchangers/StaticWallFlueGasesExchanger.mo:94:3-95:83:writable] Warning: Connector C2 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/DynamicTwoPhaseFlowPipe.mo:184:3-185:48:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/DynamicTwoPhaseFlowPipe.mo:188:3-189:46:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:35:3-36:82:writable] Warning: Connector Cfg1 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:37:3-39:17:writable] Warning: Connector Cfg2 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:40:3-42:16:writable] Warning: Connector Cws1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:43:3-44:83:writable] Warning: Connector Cws2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/SingularPressureLoss.mo:25:3-27:16:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/SingularPressureLoss.mo:28:3-29:52:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/FlueGases/HeatExchangers/StaticWallFlueGasesExchanger.mo:89:3-91:16:writable] Warning: Connector C1 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/FlueGases/HeatExchangers/StaticWallFlueGasesExchanger.mo:94:3-95:83:writable] Warning: Connector C2 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/DynamicTwoPhaseFlowPipe.mo:184:3-185:48:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/DynamicTwoPhaseFlowPipe.mo:188:3-189:46:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:35:3-36:82:writable] Warning: Connector Cfg1 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:37:3-39:17:writable] Warning: Connector Cfg2 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:40:3-42:16:writable] Warning: Connector Cws1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:43:3-44:83:writable] Warning: Connector Cws2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/FlueGases/HeatExchangers/StaticWallFlueGasesExchanger.mo:89:3-91:16:writable] Warning: Connector C1 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/FlueGases/HeatExchangers/StaticWallFlueGasesExchanger.mo:94:3-95:83:writable] Warning: Connector C2 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/DynamicTwoPhaseFlowPipe.mo:184:3-185:48:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/DynamicTwoPhaseFlowPipe.mo:188:3-189:46:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:35:3-36:82:writable] Warning: Connector Cfg1 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:37:3-39:17:writable] Warning: Connector Cfg2 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:40:3-42:16:writable] Warning: Connector Cws1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:43:3-44:83:writable] Warning: Connector Cws2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/FlueGases/PressureLosses/InvSingularPressureLoss.mo:19:3-21:42:writable] Warning: Connector C1 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/FlueGases/PressureLosses/InvSingularPressureLoss.mo:22:3-24:37:writable] Warning: Connector C2 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/FlueGases/Junctions/Mixer2.mo:24:3-26:24:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/FlueGases/Junctions/Mixer2.mo:27:3-28:52:writable] Warning: Connector Cs is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/FlueGases/Junctions/Mixer2.mo:30:3-32:17:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/FlueGases/HeatExchangers/StaticFluegasesFluegasesExchangerKS.mo:30:3-31:83:writable] Warning: Connector Sc is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/FlueGases/HeatExchangers/StaticFluegasesFluegasesExchangerKS.mo:32:3-34:16:writable] Warning: Connector Ec is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/FlueGases/HeatExchangers/StaticFluegasesFluegasesExchangerKS.mo:35:3-37:16:writable] Warning: Connector Ef is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/FlueGases/HeatExchangers/StaticFluegasesFluegasesExchangerKS.mo:38:3-39:83:writable] Warning: Connector Sf is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/FlueGases/BoundaryConditions/SourcePQ.mo:18:3-19:83:writable] Warning: Connector C is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/FlueGases/Volumes/VolumeATh.mo:49:3-51:16:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/FlueGases/Volumes/VolumeATh.mo:52:3-54:16:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/FlueGases/Volumes/VolumeATh.mo:55:3-56:83:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/FlueGases/Volumes/VolumeATh.mo:59:3-60:83:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:25:3-27:42:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:28:3-30:37:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:31:3-33:37:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:38:3-40:43:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:25:3-27:42:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:28:3-30:37:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:31:3-33:37:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:38:3-40:43:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/BoundaryConditions/SourcePQ.mo:29:3-30:52:writable] Warning: Connector C is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/Combustion/BoundaryConditions/FuelSourcePQ.mo:21:3-22:65:writable] Warning: Connector C is not balanced: The number of potential variables (14) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/ControlValve.mo:45:3-47:43:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/ControlValve.mo:48:3-50:38:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/LoopBreakers/LoopBreakerP.mo:6:3-8:16:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/LoopBreakers/LoopBreakerP.mo:9:3-10:83:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/LoopBreakers/LoopBreakerP.mo:6:3-8:16:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/LoopBreakers/LoopBreakerP.mo:9:3-10:83:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/LoopBreakers/LoopBreakerP.mo:6:3-8:16:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/LoopBreakers/LoopBreakerP.mo:9:3-10:83:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Sensors/SensorQ.mo:19:3-21:43:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Sensors/SensorQ.mo:22:3-24:38:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Sensors/SensorQ.mo:19:3-21:43:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Sensors/SensorQ.mo:22:3-24:38:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:35:3-37:42:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:38:3-40:37:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/ControlValve.mo:45:3-47:43:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/ControlValve.mo:48:3-50:38:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:35:3-37:42:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:38:3-40:37:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:35:3-37:42:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:38:3-40:37:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:25:3-27:42:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:28:3-30:37:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:31:3-33:37:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:38:3-40:43:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/SingularPressureLoss.mo:25:3-27:16:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/SingularPressureLoss.mo:28:3-29:52:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/CheckValve.mo:38:3-39:49:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/CheckValve.mo:40:3-41:47:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Sensors/SensorQ.mo:19:3-21:43:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Sensors/SensorQ.mo:22:3-24:38:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeB.mo:29:3-31:42:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeB.mo:32:3-34:37:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeB.mo:35:3-37:37:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeB.mo:38:3-40:43:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:65:3-67:38:writable] Warning: Connector Ee is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:68:3-70:36:writable] Warning: Connector Se is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:71:3-73:37:writable] Warning: Connector Ep is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:74:3-76:38:writable] Warning: Connector Sp is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:77:3-79:36:writable] Warning: Connector Ev is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:65:3-67:38:writable] Warning: Connector Ee is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:68:3-70:36:writable] Warning: Connector Se is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:71:3-73:37:writable] Warning: Connector Ep is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:74:3-76:38:writable] Warning: Connector Sp is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:77:3-79:36:writable] Warning: Connector Ev is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeB.mo:29:3-31:42:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeB.mo:32:3-34:37:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeB.mo:35:3-37:37:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeB.mo:38:3-40:43:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeB.mo:29:3-31:42:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeB.mo:32:3-34:37:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeB.mo:35:3-37:37:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeB.mo:38:3-40:43:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:25:3-27:42:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:28:3-30:37:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:31:3-33:37:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:38:3-40:43:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:25:3-27:42:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:28:3-30:37:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:31:3-33:37:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:38:3-40:43:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/SingularPressureLoss.mo:25:3-27:16:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/SingularPressureLoss.mo:28:3-29:52:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/LoopBreakers/LoopBreakerP.mo:6:3-8:16:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/LoopBreakers/LoopBreakerP.mo:9:3-10:83:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/SingularPressureLoss.mo:25:3-27:16:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/SingularPressureLoss.mo:28:3-29:52:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/SingularPressureLoss.mo:25:3-27:16:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/SingularPressureLoss.mo:28:3-29:52:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/SingularPressureLoss.mo:25:3-27:16:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/SingularPressureLoss.mo:28:3-29:52:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/SingularPressureLoss.mo:25:3-27:16:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/SingularPressureLoss.mo:28:3-29:52:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/SingularPressureLoss.mo:25:3-27:16:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/SingularPressureLoss.mo:28:3-29:52:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:25:3-27:42:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:28:3-30:37:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:31:3-33:37:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:38:3-40:43:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:25:3-27:42:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:28:3-30:37:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:31:3-33:37:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:38:3-40:43:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
Notification: Performance of NFTyping.typeComponents: time 0.013/2.802, allocations: 4.141 MB / 0.8443 GB, free: 2.051 MB / 0.6856 GB
Notification: Performance of NFTyping.typeBindings: time 0.03314/2.835, allocations: 11.99 MB / 0.856 GB, free: 1.969 MB / 0.6856 GB
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/Properties/WaterSteam/IF97_packages.mo:783:9-783:27:writable] Warning: cv was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/Properties/WaterSteam/IF97_packages.mo:850:9-850:27:writable] Warning: cv was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/Properties/WaterSteam/IF97_packages.mo:1088:9-1088:27:writable] Warning: cv was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/Properties/WaterSteamSimple/prop4_Ph.mo:69:3-69:60:writable] Warning: dh1satp was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/Properties/WaterSteamSimple/prop4_Ph.mo:69:3-69:60:writable] Warning: dh2satp was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/Properties/WaterSteamSimple/prop4_Ph_der.mo:167:3-170:49:writable] Warning: du1satp_der was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/Properties/WaterSteamSimple/prop4_Ph_der.mo:167:3-170:49:writable] Warning: du2satp_der was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/Properties/WaterSteam/IF97_packages.mo:1445:9-1445:35:writable] Warning: h was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/Properties/WaterSteamSimple/prop4_Ps.mo:71:3-71:60:writable] Warning: dh1satp was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/Properties/WaterSteamSimple/prop4_Ps.mo:71:3-71:60:writable] Warning: dh2satp was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed.
Notification: Performance of NFTyping.typeClassSections: time 0.0547/2.89, allocations: 23.99 MB / 0.8795 GB, free: 1.473 MB / 0.6856 GB
Notification: Performance of NFFlatten.flatten: time 0.06295/2.953, allocations: 54.7 MB / 0.9329 GB, free: 6.965 MB / 0.7012 GB
Notification: Performance of NFFlatten.resolveConnections: time 0.03333/2.986, allocations: 15.14 MB / 0.9477 GB, free: 12.36 MB / 0.7169 GB
Notification: Performance of NFEvalConstants.evaluate: time 0.03816/3.024, allocations: 19.59 MB / 0.9668 GB, free: 13.67 MB / 0.7325 GB
Notification: Performance of NFSimplifyModel.simplify: time 0.0384/3.063, allocations: 18.28 MB / 0.9846 GB, free: 12.05 MB / 0.7481 GB
Notification: Performance of NFPackage.collectConstants: time 0.0146/3.077, allocations: 3.527 MB / 0.9881 GB, free: 8.523 MB / 0.7481 GB
Notification: Performance of NFFlatten.collectFunctions: time 0.07583/3.153, allocations: 30.02 MB / 1.017 GB, free: 10.77 MB / 0.7794 GB
Notification: Performance of NFScalarize.scalarize: time 0.01831/3.171, allocations: 10.03 MB / 1.027 GB, free: 0.9102 MB / 0.7794 GB
Notification: Performance of NFVerifyModel.verify: time 0.03793/3.209, allocations: 14.76 MB / 1.042 GB, free: 2.285 MB / 0.795 GB
Notification: Performance of NFConvertDAE.convert: time 0.1026/3.312, allocations: 56.88 MB / 1.097 GB, free: 11.53 MB / 0.8575 GB
Notification: Performance of FrontEnd - DAE generated: time 1.283e-05/3.312, allocations: 8 kB / 1.097 GB, free: 11.52 MB / 0.8575 GB
Notification: Performance of FrontEnd: time 2.114e-06/3.312, allocations: 0 / 1.097 GB, free: 11.52 MB / 0.8575 GB
Notification: Performance of Transformations before backend: time 0.001854/3.314, allocations: 0 / 1.097 GB, free: 11.52 MB / 0.8575 GB
Notification: Model statistics after passing the front-end and creating the data structures used by the back-end:
 * Number of equations: 8847
 * Number of variables: 8847
Notification: Performance of Generate backend data structure: time 0.1605/3.474, allocations: 50.93 MB / 1.147 GB, free: 8.375 MB / 0.9044 GB
Notification: Performance of prepare preOptimizeDAE: time 5.25e-05/3.474, allocations: 8.031 kB / 1.147 GB, free: 8.367 MB / 0.9044 GB
Notification: Performance of preOpt introduceOutputAliases (simulation): time 0.01411/3.488, allocations: 3.979 MB / 1.151 GB, free: 4.379 MB / 0.9044 GB
Notification: Performance of preOpt normalInlineFunction (simulation): time 0.02631/3.515, allocations: 4.577 MB / 1.155 GB, free: 15.78 MB / 0.92 GB
Notification: Performance of preOpt evaluateParameters (simulation): time 0.02804/3.543, allocations: 10.28 MB / 1.165 GB, free: 5.52 MB / 0.92 GB
Notification: Performance of preOpt simplifyIfEquations (simulation): time 0.4206/3.963, allocations: 11.44 MB / 1.176 GB, free: 467.2 MB / 0.92 GB
Notification: Performance of preOpt expandDerOperator (simulation): time 0.009772/3.973, allocations: 2.102 MB / 1.179 GB, free: 467.2 MB / 0.92 GB
Notification: Performance of preOpt clockPartitioning (simulation): time 0.1168/4.09, allocations: 45.6 MB / 1.223 GB, free: 450.1 MB / 0.92 GB
Notification: Performance of preOpt findStateOrder (simulation): time 0.001076/4.091, allocations: 55.72 kB / 1.223 GB, free: 450.1 MB / 0.92 GB
Notification: Performance of preOpt replaceEdgeChange (simulation): time 0.01015/4.101, allocations: 0.857 MB / 1.224 GB, free: 449.4 MB / 0.92 GB
Notification: Performance of preOpt inlineArrayEqn (simulation): time 0.001268/4.102, allocations: 1.302 MB / 1.225 GB, free: 449 MB / 0.92 GB
Notification: Performance of preOpt removeEqualRHS (simulation): time 0.1105/4.213, allocations: 47 MB / 1.271 GB, free: 410 MB / 0.92 GB
Warning: The model contains alias variables with redundant start and/or conflicting nominal values. It is recommended to resolve the conflicts, because otherwise the system could be hard to solve. To print the conflicting alias sets and the chosen candidates please use -d=aliasConflicts.
Notification: Performance of preOpt removeSimpleEquations (simulation): time 0.3111/4.524, allocations: 142.2 MB / 1.41 GB, free: 270.1 MB / 0.92 GB
Notification: Performance of preOpt comSubExp (simulation): time 0.08201/4.606, allocations: 36.33 MB / 1.445 GB, free: 234.1 MB / 0.92 GB
Notification: Performance of preOpt resolveLoops (simulation): time 0.05624/4.662, allocations: 26.94 MB / 1.472 GB, free: 207.3 MB / 0.92 GB
Notification: Performance of preOpt evalFunc (simulation): time 0.3302/4.992, allocations: 107.6 MB / 1.577 GB, free: 100.3 MB / 0.92 GB
Notification: Performance of preOpt encapsulateWhenConditions (simulation): time 0.06984/5.062, allocations: 31.92 MB / 1.608 GB, free: 68.29 MB / 0.92 GB
Notification: Performance of pre-optimization done (n=5838): time 4.115e-05/5.062, allocations: 0 / 1.608 GB, free: 68.29 MB / 0.92 GB
Notification: Performance of matching and sorting (n=5848): time 1.342/6.405, allocations: 270.4 MB / 1.872 GB, free: 313.2 MB / 0.9202 GB
Notification: Performance of inlineWhenForInitialization (initialization): time 0.0002802/6.405, allocations: 1.064 MB / 1.873 GB, free: 311.9 MB / 0.9202 GB
Notification: Performance of selectInitializationVariablesDAE (initialization): time 0.007809/6.413, allocations: 7.113 MB / 1.88 GB, free: 305 MB / 0.9202 GB
Notification: Performance of collectPreVariables (initialization): time 0.006338/6.419, allocations: 429.7 kB / 1.88 GB, free: 304.6 MB / 0.9202 GB
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/CheckValve.mo:7:3-8:32:writable] Warning: The parameter CheckValve.k has fixed = false and a binding equation CheckValve.k = 100.0, which is probably redundant.
Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/SingularPressureLoss.mo:3:3-3:53:writable] Warning: The parameter singularPressureLoss_Eco.K has fixed = false and a binding equation singularPressureLoss_Eco.K = 3867.0, which is probably redundant.
Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:3:3-3:59:writable] Warning: The parameter lumpedStraightPipe_HP2.K has fixed = false and a binding equation lumpedStraightPipe_HP2.K = 1e-4, which is probably redundant.
Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/SingularPressureLoss.mo:3:3-3:53:writable] Warning: The parameter singularPressureLoss_RBT.K has fixed = false and a binding equation singularPressureLoss_RBT.K = 34.39, which is probably redundant.
Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/SingularPressureLoss.mo:3:3-3:53:writable] Warning: The parameter singularPressureLoss_SBT.K has fixed = false and a binding equation singularPressureLoss_SBT.K = 910.878, which is probably redundant.
Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/ControlValve.mo:3:3-4:43:writable] Warning: The parameter controlValveIP.Cvmax has fixed = false and a binding equation controlValveIP.Cvmax = 8005.0, which is probably redundant.
Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/ControlValve.mo:3:3-4:43:writable] Warning: The parameter controlValveHP.Cvmax has fixed = false and a binding equation controlValveHP.Cvmax = 8005.0, which is probably redundant.
Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:3:3-3:58:writable] Warning: The parameter Turbine_HP1.Cst has fixed = false and a binding equation Turbine_HP1.Cst = 279474.0, which is probably redundant.
Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:3:3-3:59:writable] Warning: The parameter lumpedStraightPipe_HP_IP.K has fixed = false and a binding equation lumpedStraightPipe_HP_IP.K = 10.0, which is probably redundant.
Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:3:3-3:59:writable] Warning: The parameter lumpedStraightPipe_HP.K has fixed = false and a binding equation lumpedStraightPipe_HP.K = 10.0, which is probably redundant.
Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:3:3-3:59:writable] Warning: The parameter lumpedStraightPipe_HP1.K has fixed = false and a binding equation lumpedStraightPipe_HP1.K = 10.0, which is probably redundant.
Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StaticCentrifugalPump.mo:22:3-23:69:writable] Warning: The parameter staticCentrifugalPump1.a1 has fixed = false and a binding equation staticCentrifugalPump1.a1 = -3050.0, which is probably redundant.
Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:3:3-3:59:writable] Warning: The parameter lumpedStraightPipe_IP1.K has fixed = false and a binding equation lumpedStraightPipe_IP1.K = 10.0, which is probably redundant.
Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StaticCentrifugalPump.mo:22:3-23:69:writable] Warning: The parameter staticCentrifugalPump.a1 has fixed = false and a binding equation staticCentrifugalPump.a1 = -390.0, which is probably redundant.
Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:3:3-3:59:writable] Warning: The parameter lumpedStraightPipe_LP3.K has fixed = false and a binding equation lumpedStraightPipe_LP3.K = 10.0, which is probably redundant.
Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:3:3-3:59:writable] Warning: The parameter lumpedStraightPipe_LP2.K has fixed = false and a binding equation lumpedStraightPipe_LP2.K = 10.0, which is probably redundant.
Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:3:3-3:59:writable] Warning: The parameter lumpedStraightPipe_LP1.K has fixed = false and a binding equation lumpedStraightPipe_LP1.K = 10.0, which is probably redundant.
Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/PipePressureLoss.mo:3:3-3:59:writable] Warning: The parameter lumpedStraightPipe_IP3.K has fixed = false and a binding equation lumpedStraightPipe_IP3.K = 10.0, which is probably redundant.
Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:3:3-3:58:writable] Warning: The parameter Echappement.Cst has fixed = false and a binding equation Echappement.Cst = 14.7, which is probably redundant.
Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:3:3-3:58:writable] Warning: The parameter Turbine_LP3.Cst has fixed = false and a binding equation Turbine_LP3.Cst = 59.4076, which is probably redundant.
Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:3:3-3:58:writable] Warning: The parameter Turbine_IP3.Cst has fixed = false and a binding equation Turbine_IP3.Cst = 34076.9, which is probably redundant.
Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:3:3-3:58:writable] Warning: The parameter Turbine_LP1.Cst has fixed = false and a binding equation Turbine_LP1.Cst = 4485.97, which is probably redundant.
Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:3:3-3:58:writable] Warning: The parameter Turbine_IP1.Cst has fixed = false and a binding equation Turbine_IP1.Cst = 102478.0, which is probably redundant.
Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:3:3-3:58:writable] Warning: The parameter Turbine_LP2.Cst has fixed = false and a binding equation Turbine_LP2.Cst = 1215.75, which is probably redundant.
Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:3:3-3:58:writable] Warning: The parameter Turbine_IP2.Cst has fixed = false and a binding equation Turbine_IP2.Cst = 53802.6, which is probably redundant.
Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Machines/StodolaTurbine.mo:3:3-3:58:writable] Warning: The parameter Turbine_HP.Cst has fixed = false and a binding equation Turbine_HP.Cst = 2.00537e6, which is probably redundant.
Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding.
Notification: Performance of collectInitialEqns (initialization): time 0.004231/6.423, allocations: 6.43 MB / 1.887 GB, free: 298.9 MB / 0.9202 GB
Notification: Performance of collectInitialBindings (initialization): time 0.01728/6.441, allocations: 20.15 MB / 1.906 GB, free: 280.5 MB / 0.9202 GB
Notification: Performance of simplifyInitialFunctions (initialization): time 0.02454/6.465, allocations: 6.512 MB / 1.913 GB, free: 274 MB / 0.9202 GB
Notification: Performance of setup shared object (initialization): time 4.521e-05/6.465, allocations: 313.1 kB / 1.913 GB, free: 273.7 MB / 0.9202 GB
Notification: Performance of preBalanceInitialSystem (initialization): time 0.05396/6.519, allocations: 24.57 MB / 1.937 GB, free: 249.1 MB / 0.9202 GB
Notification: Performance of partitionIndependentBlocks (initialization): time 0.05984/6.579, allocations: 30.99 MB / 1.967 GB, free: 216.4 MB / 0.9202 GB
Notification: It was not possible to check the given initialization system for consistency symbolically, because the relevant equations are part of an algebraic loop. This is not supported yet.
Notification: Performance of analyzeInitialSystem (initialization): time 1.709/8.289, allocations: 0.601 GB / 2.568 GB, free: 67.6 MB / 0.9202 GB
Notification: Performance of solveInitialSystemEqSystem (initialization): time 0.0001316/8.289, allocations: 28 kB / 2.568 GB, free: 67.57 MB / 0.9202 GB
Notification: Performance of matching and sorting (n=6519) (initialization): time 0.4778/8.766, allocations: 83.26 MB / 2.65 GB, free: 402.3 MB / 0.9202 GB
Notification: Performance of prepare postOptimizeDAE: time 0.0001414/8.767, allocations: 112.1 kB / 2.65 GB, free: 402.2 MB / 0.9202 GB
Notification: Performance of postOpt simplifyComplexFunction (initialization): time 0.0003614/8.767, allocations: 136.4 kB / 2.65 GB, free: 402.2 MB / 0.9202 GB
Notification: Performance of postOpt tearingSystem (initialization): time 1.875/10.64, allocations: 0.849 GB / 3.499 GB, free: 403.8 MB / 0.9202 GB
Notification: Performance of postOpt solveSimpleEquations (initialization): time 0.007746/10.65, allocations: 1.693 MB / 3.5 GB, free: 403.8 MB / 0.9202 GB
Notification: Performance of postOpt calculateStrongComponentJacobians (initialization): time 0.01134/10.66, allocations: 12.54 MB / 3.513 GB, free: 393.8 MB / 0.9202 GB
Notification: Performance of postOpt simplifyAllExpressions (initialization): time 0.03224/10.69, allocations: 2.808 MB / 3.515 GB, free: 393.8 MB / 0.9202 GB
Notification: Performance of postOpt collapseArrayExpressions (initialization): time 0.008795/10.7, allocations: 1.238 MB / 3.517 GB, free: 393.8 MB / 0.9202 GB
Warning: Assuming fixed start value for the following 4 variables:
         TemperatureControl.pIsat.Integrateur1.x0:DISCRETE(fixed = true protected = true )  type: Real
         regulation_Level_Condenser.pIsat.Integrateur1.x0:DISCRETE(fixed = true protected = true )  type: Real
         regulation_Level_Condenser.pIsat1.Integrateur1.x0:DISCRETE(fixed = true protected = true )  type: Real
         Pump_VelocityControl.pIsat.Integrateur1.x0:DISCRETE(fixed = true protected = true )  type: Real
Warning: The initial conditions are over specified. The following 30 initial equations are redundant, so they are removed from the initialization system:
         $DER.splitter_TurbineIP2.P = 0.0
         $DER.splitter_Turbine_HP.P = 0.0
         $DER.Boiler_walls.TwoPhaseFlowPipe.Q[1] = 0.0
         $DER.RMT_RHT.TwoPhaseFlowPipe.Q[4] = 0.0
         $DER.SBT.TwoPhaseFlowPipe.Q[1] = 0.0
         $DER.RBT.TwoPhaseFlowPipe.Q[1] = 0.0
         $DER.RBT.TwoPhaseFlowPipe.Q[4] = 0.0
         $DER.Economiseur.TwoPhaseFlowPipe.Q[1] = 0.0
         $DER.SMT_SHT.TwoPhaseFlowPipe.Q[3] = 0.0
         $DER.SMT_SHT.TwoPhaseFlowPipe.Q[4] = 0.0
         $DER.volumeA.P = 0.0
         $DER.TemperatureControl.pIsat.Integrateur1.x = 0.0
         $DER.volume_HP2.P = 0.0
         $DER.volume_HP1Vap1.P = 0.0
         $DER.volume_HP21.P = 0.0
         $DER.volume_HP21.h = 0.0
         $DER.pT1_2.x = 0.0
         CheckValve.Q = $START.CheckValve.Q
         SMT_SHT.TwoPhaseFlowPipe.P[5] = $START.SMT_SHT.TwoPhaseFlowPipe.P[5]
         RMT_RHT.TwoPhaseFlowPipe.P[5] = $START.RMT_RHT.TwoPhaseFlowPipe.P[5]
         lumpedStraightPipe_HP_IP.Q = $START.lumpedStraightPipe_HP_IP.Q
         lumpedStraightPipe_LP3.Q = $START.lumpedStraightPipe_LP3.Q
         splitter_TurbineLP3.P = $START.splitter_TurbineLP3.P
         lumpedStraightPipe_LP2.Q = $START.lumpedStraightPipe_LP2.Q
         splitter_TurbineLP2.P = $START.splitter_TurbineLP2.P
         lumpedStraightPipe_LP1.Q = $START.lumpedStraightPipe_LP1.Q
         splitter_TurbineLP1.P = $START.splitter_TurbineLP1.P
         splitter_TurbineIP3.P = $START.splitter_TurbineIP3.P
         splitter_TurbineIP2.P = $START.splitter_TurbineIP2.P
         Turbine_HP.Pe = $START.Turbine_HP.Pe.
Notification: Model statistics after passing the back-end for initialization:
 * Number of independent subsystems: 484
 * Number of states: 0 ()
 * Number of discrete variables: 348 ($PRE.TemperatureControl.pIsat.Integrateur1.x0,TemperatureControl.pIsat.Integrateur1.x0,$PRE.regulation_Level_Condenser.pIsat.Integrateur1.x0,regulation_Level_Condenser.pIsat.Integrateur1.x0,$PRE.regulation_Level_Condenser.pIsat1.Integrateur1.x0,regulation_Level_Condenser.pIsat1.Integrateur1.x0,$PRE.Pump_VelocityControl.pIsat.Integrateur1.x0,Pump_VelocityControl.pIsat.Integrateur1.x0,$PRE.CheckValve.touvert,$whenCondition2,$PRE.CheckValve.tferme,$whenCondition1,Pump_VelocityControl.pIsat.Integrateur1.reset.signal,regulation_Level_Condenser.pIsat.Integrateur1.reset.signal,TemperatureControl.pIsat.Integrateur1.reset.signal,CheckValve.tferme,CheckValve.touvert,CheckValve.ouvert,$PRE.CheckValve.ouvert,regulation_Level_Condenser.echelon.yL.signal,regulation_Level_Condenser.edge.yL.signal,regulation_Level_Condenser.edge.uL.signal,$PRE.regulation_Level_Condenser.edge.uL.signal,$whenCondition3,volume_HP22.Cs2.b,volume_HP22.Cs1.b,volume_HP22.Ce2.a,volume_HP22.Ce1.a,volume_HP21.Cs2.b,volume_HP21.Cs1.b,volume_HP21.Ce2.a,volume_HP21.Ce1.a,singularPressureLoss7.C2.b,singularPressureLoss7.C1.a,singularPressureLoss6.C2.b,singularPressureLoss6.C1.a,singularPressureLoss5.C2.b,singularPressureLoss5.C1.a,singularPressureLoss4.C2.b,singularPressureLoss4.C1.a,singularPressureLoss3.C2.b,singularPressureLoss3.C1.a,singularPressureLoss2.C2.b,singularPressureLoss2.C1.a,singularPressureLoss1.C2.b,singularPressureLoss1.C1.a,volume_HP1Vap1.Cs2.b,volume_HP1Vap1.Cs1.b,volume_HP1Vap1.Ce2.a,volume_HP1Vap1.Ce1.a,volume_HP1Vap.Cs2.b,volume_HP1Vap.Cs1.b,volume_HP1Vap.Ce2.a,volume_HP1Vap.Ce1.a,volume_HP3.Cs2.b,volume_HP3.Cs1.b,volume_HP3.Ce2.a,volume_HP3.Ce1.a,volume_HP2.Cs2.b,volume_HP2.Cs1.b,volume_HP2.Ce2.a,volume_HP2.Ce1.a,ReheaterHP2_1.Ev.a,ReheaterHP2_1.Sp.b,ReheaterHP2_1.Ep.a,ReheaterHP2_1.Se.b,ReheaterHP2_1.Ee.a,ReheaterHP1_1.Ev.a,ReheaterHP1_1.Sp.b,ReheaterHP1_1.Ep.a,ReheaterHP1_1.Se.b,ReheaterHP1_1.Ee.a,volume_HP1.Cs2.b,volume_HP1.Cs1.b,volume_HP1.Ce2.a,volume_HP1.Ce1.a,sensorQ.C2.b,sensorQ.C1.a,CheckValve.C2.b,CheckValve.C1.a,singularPressureLoss_Eco.C2.b,singularPressureLoss_Eco.C1.a,splitter_condenser.Cs2.b,splitter_condenser.Cs1.b,splitter_condenser.Ce2.a,splitter_condenser.Ce1.a,lumpedStraightPipe_HP2.C2.b,lumpedStraightPipe_HP2.C1.a,lumpedStraightPipe_Condenser1.C2.b,lumpedStraightPipe_Condenser1.C1.a,controlValve_Condenser.C2.b,controlValve_Condenser.C1.a,lumpedStraightPipe_Low.C2.b,lumpedStraightPipe_Low.C1.a,Sensor_Qvap_Cond2.C2.b,Sensor_Qvap_Cond2.C1.a,Sensor_Qvap_Cond.C2.b,Sensor_Qvap_Cond.C1.a,loopBreakerP_Cond.C2.b,loopBreakerP_Cond.C1.a,loopBreakerP_ReDrum.C2.b,loopBreakerP_ReDrum.C1.a,loopBreakerP_Drum_2.C2.b,loopBreakerP_Drum_2.C1.a,controlValveEco.C2.b,controlValveEco.C1.a,fuelSourcePQ.C.b,sourceQ.C.b,volumeA.Cs2.b,volumeA.Cs1.b,volumeA.Ce2.a,volumeA.Ce1.a,volumeA1.Cs2.b,volumeA1.Cs1.b,volumeA1.Ce2.a,volumeA1.Ce1.a,AirPreheater.Ce2.a,AirPreheater.Cs1.b,AirPreheater.Cs2.b,AirPreheater.Ce1.a,sourceAir.C.b,RA.Sf.b,RA.Ef.a,RA.Ec.a,RA.Sc.b,mixer2_1.Ce1.a,mixer2_1.Cs.b,mixer2_1.Ce2.a,singularPressureLoss.C2.b,singularPressureLoss.C1.a,SMT_SHT.TwoPhaseFlowPipe.C2.b,SMT_SHT.TwoPhaseFlowPipe.C1.a,SMT_SHT.ExchangerFlueGasesMetal.C2.b,SMT_SHT.ExchangerFlueGasesMetal.C1.a,Economiseur.TwoPhaseFlowPipe.C2.b,Economiseur.TwoPhaseFlowPipe.C1.a,Economiseur.ExchangerFlueGasesMetal.C2.b,Economiseur.ExchangerFlueGasesMetal.C1.a,singularPressureLoss_RBT.C2.b,singularPressureLoss_RBT.C1.a,RBT.TwoPhaseFlowPipe.C2.b,RBT.TwoPhaseFlowPipe.C1.a,RBT.ExchangerFlueGasesMetal.C2.b,RBT.ExchangerFlueGasesMetal.C1.a,singularPressureLoss_SBT.C2.b,singularPressureLoss_SBT.C1.a,SBT.TwoPhaseFlowPipe.C2.b,SBT.TwoPhaseFlowPipe.C1.a,SBT.ExchangerFlueGasesMetal.C2.b,SBT.ExchangerFlueGasesMetal.C1.a,RMT_RHT.TwoPhaseFlowPipe.C2.b,RMT_RHT.TwoPhaseFlowPipe.C1.a,RMT_RHT.ExchangerFlueGasesMetal.C2.b,RMT_RHT.ExchangerFlueGasesMetal.C1.a,puitsFumeesPTQXA1.C.a,Boiler_walls.TwoPhaseFlowPipe.C2.b,Boiler_walls.TwoPhaseFlowPipe.C1.a,Boiler_walls.ExchangerFlueGasesMetal.C2.b,Boiler_walls.ExchangerFlueGasesMetal.C1.a,splitter2_1.Cs2.b,splitter2_1.Cs1.b,splitter2_1.Ce.a,Wall_screen.C2.b,Wall_screen.C1.a,genericCombustion.Cws.a,genericCombustion.Cfg.b,genericCombustion.Ca.a,genericCombustion.Cfuel.a,controlValveIP.C2.b,controlValveIP.C1.a,controlValveHP.C2.b,controlValveHP.C1.a,sensorT.C2.b,sensorT.C1.a,splitter_Turbine_HP.Cs3.b,splitter_Turbine_HP.Cs2.b,splitter_Turbine_HP.Cs1.b,splitter_Turbine_HP.Ce.a,Turbine_HP1.Cs.b,Turbine_HP1.Ce.a,lumpedStraightPipe_HP_IP.C2.b,lumpedStraightPipe_HP_IP.C1.a,lumpedStraightPipe_HP.C2.b,lumpedStraightPipe_HP.C1.a,Desuperheater.Sc.b,Desuperheater.Sf.b,Desuperheater.Ef.a,Desuperheater.Ec.a,ReheaterHP1.Ev.a,ReheaterHP1.Sp.b,ReheaterHP1.Ep.a,ReheaterHP1.Se.b,ReheaterHP1.Ee.a,lumpedStraightPipe_HP1.C2.b,lumpedStraightPipe_HP1.C1.a,ReheaterHP2.Ev.a,ReheaterHP2.Sp.b,ReheaterHP2.Ep.a,ReheaterHP2.Se.b,ReheaterHP2.Ee.a,lumpedStraightPipe_Desu.C2.b,lumpedStraightPipe_Desu.C1.a,ReheaterHP3.Ev.a,ReheaterHP3.Sp.b,ReheaterHP3.Ep.a,ReheaterHP3.Se.b,ReheaterHP3.Ee.a,staticCentrifugalPump1.C2.b,staticCentrifugalPump1.C1.a,Drum_2.Cs3.b,Drum_2.Cs2.b,Drum_2.Cs1.b,Drum_2.Cs4.b,Drum_2.Ce1.a,Drum_2.Ce4.a,Drum_2.Ce3.a,Drum_2.Ce2.a,lumpedStraightPipe_IP1.C2.b,lumpedStraightPipe_IP1.C1.a,Drum_1.Cs3.b,Drum_1.Cs2.b,Drum_1.Cs1.b,Drum_1.Cs4.b,Drum_1.Ce1.a,Drum_1.Ce4.a,Drum_1.Ce3.a,Drum_1.Ce2.a,pipePressureLoss_LP3_Drum.C2.b,pipePressureLoss_LP3_Drum.C1.a,ReheaterIP.Ev.a,ReheaterIP.Sp.b,ReheaterIP.Ep.a,ReheaterIP.Se.b,ReheaterIP.Ee.a,ReheaterLP1.Ev.a,ReheaterLP1.Sp.b,ReheaterLP1.Ep.a,ReheaterLP1.Se.b,ReheaterLP1.Ee.a,ReheaterLP2.Ev.a,ReheaterLP2.Sp.b,ReheaterLP2.Ep.a,ReheaterLP2.Se.b,ReheaterLP2.Ee.a,ReheaterLP3.Ev.a,ReheaterLP3.Sp.b,ReheaterLP3.Ep.a,ReheaterLP3.Se.b,ReheaterLP3.Ee.a,ReDrum.Sc.b,ReDrum.Sf.b,ReDrum.Ef.a,ReDrum.Ec.a,staticCentrifugalPump.C2.b,staticCentrifugalPump.C1.a,Condenser.Cse.b,Condenser.Cee.a,Condenser.Cl.b,Condenser.Cv.a,lumpedStraightPipe_Condenser2.C2.b,lumpedStraightPipe_Condenser2.C1.a,SourceCaloporteur.C.b,PuitsCaloporteur.C.a,lumpedStraightPipe_LP3.C2.b,lumpedStraightPipe_LP3.C1.a,splitter_TurbineLP3.Cs2.b,splitter_TurbineLP3.Cs1.b,splitter_TurbineLP3.Ce2.a,splitter_TurbineLP3.Ce1.a,lumpedStraightPipe_LP2.C2.b,lumpedStraightPipe_LP2.C1.a,splitter_TurbineLP2.Cs2.b,splitter_TurbineLP2.Cs1.b,splitter_TurbineLP2.Ce2.a,splitter_TurbineLP2.Ce1.a,lumpedStraightPipe_LP1.C2.b,lumpedStraightPipe_LP1.C1.a,splitter_TurbineLP1.Cs2.b,splitter_TurbineLP1.Cs1.b,splitter_TurbineLP1.Ce2.a,splitter_TurbineLP1.Ce1.a,splitter_TurbineIP3.Cs2.b,splitter_TurbineIP3.Cs1.b,splitter_TurbineIP3.Ce2.a,splitter_TurbineIP3.Ce1.a,lumpedStraightPipe_IP3.C2.b,lumpedStraightPipe_IP3.C1.a,splitter_TurbineIP2.Cs2.b,splitter_TurbineIP2.Cs1.b,splitter_TurbineIP2.Ce2.a,splitter_TurbineIP2.Ce1.a,splitter_TurbineIP1.Cs2.b,splitter_TurbineIP1.Cs1.b,splitter_TurbineIP1.Ce2.a,splitter_TurbineIP1.Ce1.a,Echappement.Cs.b,Echappement.Ce.a,Turbine_LP3.Cs.b,Turbine_LP3.Ce.a,Turbine_IP3.Cs.b,Turbine_IP3.Ce.a,Turbine_LP1.Cs.b,Turbine_LP1.Ce.a,Turbine_IP1.Cs.b,Turbine_IP1.Ce.a,Turbine_LP2.Cs.b,Turbine_LP2.Ce.a,Turbine_IP2.Cs.b,Turbine_IP2.Ce.a,splitter_Turbine_HP1.Cs3.b,splitter_Turbine_HP1.Cs2.b,splitter_Turbine_HP1.Cs1.b,splitter_Turbine_HP1.Ce.a,Turbine_HP.Cs.b,Turbine_HP.Ce.a,volume_HP22.Cs2.a,volume_HP22.Ce2.b,volume_HP21.Cs2.a,volume_HP21.Ce2.b,volume_HP1Vap1.Ce2.b,volume_HP1Vap.Ce2.b,volume_HP3.Cs1.a,volume_HP2.Ce1.b,ReheaterHP1_1.Ep.b,volume_HP1.Cs1.a,splitter_condenser.Cs2.a,volumeA.Cs2.a,volumeA1.Ce2.b,AirPreheater.Cs2.a,AirPreheater.Ce2.b,splitter_Turbine_HP.Cs1.a,ReheaterHP1.Ep.b,Drum_2.Cs4.a,Drum_2.Cs3.a,Drum_2.Cs2.a,Drum_2.Ce3.b,Drum_1.Cs4.a,Drum_1.Cs3.a,Drum_1.Cs2.a,Drum_1.Ce4.b,Drum_1.Ce2.b,ReheaterIP.Ep.b,ReheaterLP3.Ep.b,splitter_TurbineLP3.Ce2.b,splitter_TurbineLP2.Ce2.b,splitter_TurbineLP1.Ce2.b,splitter_TurbineIP2.Ce2.b,splitter_TurbineIP1.Ce2.b)
 * Number of discrete states: 0 ()
 * Number of clocked states: 0 ()
 * Top-level inputs: 0
Notification: Strong component statistics for initialization (1049):
 * Single equations (assignments): 971
 * Array equations: 0
 * Algorithm blocks: 2
 * Record equations: 62
 * When equations: 0
 * If-equations: 0
 * Equation systems (not torn): 3
 * Torn equation systems: 11
 * Mixed (continuous/discrete) equation systems: 0
Notification: Equation system details (not torn):
 * Constant Jacobian (size): 0 systems
 * Linear Jacobian (size,density): 1 system
   {(2,100.0%)}
 * Non-linear Jacobian (size): 2 systems
   {1, 1}
 * Without analytic Jacobian (size): 0 systems
Notification: Torn system details for strict tearing set:
 * Linear torn systems (#iteration vars, #inner vars, density): 2 systems
   {(4,1,62.5%), (1,1,100.0%)}
 * Non-linear torn systems (#iteration vars, #inner vars): 9 systems
   {(1,3), (1,4), (1,3), (1,3), (1,3), (294,1675), (1,1), (9,3), (1,1)}
Notification: Performance of prepare postOptimizeDAE: time 0.02491/10.73, allocations: 5.567 MB / 3.522 GB, free: 393.4 MB / 0.9202 GB
Notification: Performance of postOpt lateInlineFunction (simulation): time 0.01313/10.74, allocations: 2.28 MB / 3.524 GB, free: 393.4 MB / 0.9202 GB
Notification: Performance of postOpt wrapFunctionCalls (simulation): time 0.2638/11, allocations: 102.1 MB / 3.624 GB, free: 335.9 MB / 0.9202 GB
Notification: Performance of postOpt inlineArrayEqn (simulation): time 0.2282/11.23, allocations: 87.52 MB / 3.71 GB, free: 253 MB / 0.9202 GB
Notification: Performance of postOpt constantLinearSystem (simulation): time 0.0001821/11.23, allocations: 16 kB / 3.71 GB, free: 253 MB / 0.9202 GB
Notification: Performance of postOpt simplifysemiLinear (simulation): time 0.001272/11.23, allocations: 206.9 kB / 3.71 GB, free: 252.8 MB / 0.9202 GB
Warning: The model contains alias variables with redundant start and/or conflicting nominal values. It is recommended to resolve the conflicts, because otherwise the system could be hard to solve. To print the conflicting alias sets and the chosen candidates please use -d=aliasConflicts.
Notification: Performance of postOpt removeSimpleEquations (simulation): time 0.4045/11.64, allocations: 153.5 MB / 3.86 GB, free: 102.1 MB / 0.9202 GB
Notification: Performance of postOpt simplifyComplexFunction (simulation): time 0.0006391/11.64, allocations: 35.62 kB / 3.86 GB, free: 102 MB / 0.9202 GB
Notification: Performance of postOpt solveSimpleEquations (simulation): time 0.04298/11.68, allocations: 8.667 MB / 3.868 GB, free: 93.46 MB / 0.9202 GB
Notification: Performance of postOpt tearingSystem (simulation): time 0.1361/11.82, allocations: 66.9 MB / 3.933 GB, free: 26.53 MB / 0.9202 GB
Notification: Performance of postOpt inputDerivativesUsed (simulation): time 0.01453/11.83, allocations: 1.147 MB / 3.935 GB, free: 25.38 MB / 0.9202 GB
Notification: Performance of postOpt calculateStrongComponentJacobians (simulation): time 0.5293/12.36, allocations: 166.9 MB / 4.098 GB, free: 309.1 MB / 0.9202 GB
Notification: Performance of postOpt calculateStateSetsJacobians (simulation): time 4.238e-06/12.36, allocations: 3.938 kB / 4.098 GB, free: 309.1 MB / 0.9202 GB
Notification: Performance of postOpt symbolicJacobian (simulation): time 0.3264/12.69, allocations: 130.7 MB / 4.225 GB, free: 203 MB / 0.9202 GB
Notification: Performance of postOpt removeConstants (simulation): time 0.02704/12.72, allocations: 7.245 MB / 4.232 GB, free: 196.9 MB / 0.9202 GB
Notification: Performance of postOpt simplifyTimeIndepFuncCalls (simulation): time 0.01239/12.73, allocations: 0.7896 MB / 4.233 GB, free: 196.1 MB / 0.9202 GB
Notification: Performance of postOpt simplifyAllExpressions (simulation): time 0.03439/12.76, allocations: 2.866 MB / 4.236 GB, free: 193.3 MB / 0.9202 GB
Notification: Performance of postOpt findZeroCrossings (simulation): time 0.01277/12.77, allocations: 2.845 MB / 4.239 GB, free: 190.4 MB / 0.9202 GB
Notification: Performance of postOpt collapseArrayExpressions (simulation): time 0.009834/12.78, allocations: 1.304 MB / 4.24 GB, free: 189.1 MB / 0.9202 GB
Notification: Performance of sorting global known variables: time 0.008268/12.79, allocations: 4.192 MB / 4.244 GB, free: 185 MB / 0.9202 GB
Notification: Performance of sort global known variables: time 9e-08/12.79, allocations: 0 / 4.244 GB, free: 185 MB / 0.9202 GB
Notification: Performance of remove unused functions: time 0.05015/12.84, allocations: 11.22 MB / 4.255 GB, free: 174.1 MB / 0.9202 GB
Notification: Model statistics after passing the back-end for simulation:
 * Number of independent subsystems: 8
 * Number of states: 152 (splitter_Turbine_HP1.P,splitter_Turbine_HP1.h,splitter_TurbineIP1.h,splitter_TurbineIP2.P,splitter_TurbineIP2.h,splitter_TurbineIP3.h,splitter_TurbineLP1.h,splitter_TurbineLP2.h,splitter_TurbineLP3.h,Condenser.P,Condenser.hl,Condenser.hv,Condenser.Vv,Drum_1.h,Drum_2.h,splitter_Turbine_HP.P,splitter_Turbine_HP.h,Wall_screen.P[2],Wall_screen.P[3],Wall_screen.P[4],Wall_screen.P[5],Wall_screen.P[6],Wall_screen.P[7],Wall_screen.P[8],Wall_screen.Q[1],Wall_screen.Q[2],Wall_screen.Q[3],Wall_screen.Q[4],Wall_screen.Q[5],Wall_screen.Q[6],Wall_screen.Q[7],Wall_screen.h[2],Wall_screen.h[3],Wall_screen.h[4],Wall_screen.h[5],Wall_screen.h[6],Wall_screen.h[7],Wall_screen.h[8],heatExchangerWall.Tp[1],heatExchangerWall.Tp[2],heatExchangerWall.Tp[3],heatExchangerWall.Tp[4],heatExchangerWall.Tp[5],heatExchangerWall.Tp[6],heatExchangerWall.Tp[7],Boiler_walls.ExchangerWall.Tp[1],Boiler_walls.ExchangerWall.Tp[2],Boiler_walls.ExchangerWall.Tp[3],Boiler_walls.TwoPhaseFlowPipe.P[2],Boiler_walls.TwoPhaseFlowPipe.P[3],Boiler_walls.TwoPhaseFlowPipe.P[4],Boiler_walls.TwoPhaseFlowPipe.Q[1],Boiler_walls.TwoPhaseFlowPipe.Q[2],Boiler_walls.TwoPhaseFlowPipe.Q[3],Boiler_walls.TwoPhaseFlowPipe.h[2],Boiler_walls.TwoPhaseFlowPipe.h[3],Boiler_walls.TwoPhaseFlowPipe.h[4],RMT_RHT.ExchangerWall.Tp[1],RMT_RHT.ExchangerWall.Tp[2],RMT_RHT.ExchangerWall.Tp[3],RMT_RHT.TwoPhaseFlowPipe.P[2],RMT_RHT.TwoPhaseFlowPipe.P[3],RMT_RHT.TwoPhaseFlowPipe.P[4],RMT_RHT.TwoPhaseFlowPipe.Q[2],RMT_RHT.TwoPhaseFlowPipe.Q[3],RMT_RHT.TwoPhaseFlowPipe.Q[4],RMT_RHT.TwoPhaseFlowPipe.h[2],RMT_RHT.TwoPhaseFlowPipe.h[3],RMT_RHT.TwoPhaseFlowPipe.h[4],SBT.ExchangerWall.Tp[1],SBT.ExchangerWall.Tp[2],SBT.ExchangerWall.Tp[3],SBT.TwoPhaseFlowPipe.P[2],SBT.TwoPhaseFlowPipe.P[3],SBT.TwoPhaseFlowPipe.P[4],SBT.TwoPhaseFlowPipe.Q[1],SBT.TwoPhaseFlowPipe.Q[2],SBT.TwoPhaseFlowPipe.Q[3],SBT.TwoPhaseFlowPipe.Q[4],SBT.TwoPhaseFlowPipe.h[2],SBT.TwoPhaseFlowPipe.h[3],SBT.TwoPhaseFlowPipe.h[4],RBT.ExchangerWall.Tp[1],RBT.ExchangerWall.Tp[2],RBT.ExchangerWall.Tp[3],RBT.TwoPhaseFlowPipe.P[2],RBT.TwoPhaseFlowPipe.P[3],RBT.TwoPhaseFlowPipe.P[4],RBT.TwoPhaseFlowPipe.Q[1],RBT.TwoPhaseFlowPipe.Q[2],RBT.TwoPhaseFlowPipe.Q[3],RBT.TwoPhaseFlowPipe.Q[4],RBT.TwoPhaseFlowPipe.h[2],RBT.TwoPhaseFlowPipe.h[3],RBT.TwoPhaseFlowPipe.h[4],Economiseur.ExchangerWall.Tp[1],Economiseur.ExchangerWall.Tp[2],Economiseur.ExchangerWall.Tp[3],Economiseur.TwoPhaseFlowPipe.P[2],Economiseur.TwoPhaseFlowPipe.P[3],Economiseur.TwoPhaseFlowPipe.P[4],Economiseur.TwoPhaseFlowPipe.Q[1],Economiseur.TwoPhaseFlowPipe.Q[2],Economiseur.TwoPhaseFlowPipe.Q[3],Economiseur.TwoPhaseFlowPipe.Q[4],Economiseur.TwoPhaseFlowPipe.h[2],Economiseur.TwoPhaseFlowPipe.h[3],Economiseur.TwoPhaseFlowPipe.h[4],SMT_SHT.ExchangerWall.Tp[1],SMT_SHT.ExchangerWall.Tp[2],SMT_SHT.ExchangerWall.Tp[3],SMT_SHT.TwoPhaseFlowPipe.P[2],SMT_SHT.TwoPhaseFlowPipe.P[3],SMT_SHT.TwoPhaseFlowPipe.P[4],SMT_SHT.TwoPhaseFlowPipe.Q[1],SMT_SHT.TwoPhaseFlowPipe.Q[2],SMT_SHT.TwoPhaseFlowPipe.Q[3],SMT_SHT.TwoPhaseFlowPipe.Q[4],SMT_SHT.TwoPhaseFlowPipe.h[2],SMT_SHT.TwoPhaseFlowPipe.h[3],SMT_SHT.TwoPhaseFlowPipe.h[4],AirPreheater.Xh2o,volumeA1.h,volumeA.P,volumeA.h,TemperatureControl.pIsat.Integrateur1.x,TemperatureControl.pT1_1.x,regulation_Level_Condenser.pIsat.Integrateur1.x,regulation_Level_Condenser.pIsat1.Integrateur1.x,regulation_Level_Condenser.pT1_1.x,regulation_Level_Condenser.pT1_2.x,regulation_Level_Condenser.pT1_3.x,splitter_condenser.h,Pump_VelocityControl.pIsat.Integrateur1.x,Pump_VelocityControl.pT1_1.x,pT1_1.x,volume_HP1.P,volume_HP1.h,volume_HP2.P,volume_HP2.h,volume_HP3.h,volume_HP1Vap.P,volume_HP1Vap.h,volume_HP1Vap1.P,volume_HP1Vap1.h,volume_HP21.P,volume_HP21.h,volume_HP22.P,volume_HP22.h,pT1_3.x,pT1_4.x,pT1_5.x)
 * Number of discrete variables: 13 ($whenCondition3,$whenCondition2,$whenCondition1,TemperatureControl.pIsat.Integrateur1.x0,regulation_Level_Condenser.pIsat.Integrateur1.x0,regulation_Level_Condenser.pIsat1.Integrateur1.x0,regulation_Level_Condenser.edge.uL.signal,regulation_Level_Condenser.edge.yL.signal,regulation_Level_Condenser.echelon.yL.signal,CheckValve.ouvert,CheckValve.touvert,CheckValve.tferme,Pump_VelocityControl.pIsat.Integrateur1.x0)
 * Number of discrete states: 5 (CheckValve.touvert,CheckValve.tferme,regulation_Level_Condenser.echelon.yL.signal,regulation_Level_Condenser.edge.yL.signal,regulation_Level_Condenser.edge.uL.signal)
 * Number of clocked states: 0 ()
 * Top-level inputs: 0
Notification: Strong component statistics for simulation (3203):
 * Single equations (assignments): 2917
 * Array equations: 0
 * Algorithm blocks: 2
 * Record equations: 168
 * When equations: 5
 * If-equations: 0
 * Equation systems (not torn): 10
 * Torn equation systems: 101
 * Mixed (continuous/discrete) equation systems: 0
Notification: Equation system details (not torn):
 * Constant Jacobian (size): 0 systems
 * Linear Jacobian (size,density): 10 systems
   {(2,100.0%), (2,100.0%), (2,100.0%), (2,100.0%), (2,100.0%), (2,100.0%), (2,100.0%), (2,100.0%), (2,100.0%), (2,100.0%)}
 * Non-linear Jacobian (size): 0 systems
 * Without analytic Jacobian (size): 0 systems
Notification: Torn system details for strict tearing set:
 * Linear torn systems (#iteration vars, #inner vars, density): 42 systems
   {(4,1,62.5%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (2,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (2,1,100.0%)}
 * Non-linear torn systems (#iteration vars, #inner vars): 59 systems
   {(1,2), (1,2), (1,2), (1,2), (1,2), (1,2), (1,4), (1,2), (1,2), (1,2), (1,2), (1,3), (1,5), (1,3), (1,2), (1,2), (1,2), (1,2), (1,3), (1,1), (93,233), (1,6), (3,7), (1,2), (1,2), (1,3), (1,6), (1,6), (1,6), (1,6), (1,34), (1,6), (1,6), (1,6), (1,6), (1,6), (1,3), (1,6), (1,6), (1,6), (2,37), (1,6), (1,6), (1,6), (1,6), (1,6), (1,5), (1,3), (52,195), (23,52), (1,3), (1,26), (1,2), (1,2), (1,1), (1,5), (1,5), (1,3), (23,52)}
Notification: Performance of Backend phase and start with SimCode phase: time 0.3512/13.19, allocations: 135.8 MB / 4.388 GB, free: 39.35 MB / 0.9202 GB
Notification: Performance of simCode: created initialization part: time 0.4866/13.68, allocations: 113.8 MB / 4.499 GB, free: 361.6 MB / 0.9202 GB
Notification: Performance of simCode: created event and clocks part: time 1.1e-05/13.68, allocations: 0 / 4.499 GB, free: 361.6 MB / 0.9202 GB
Notification: Performance of simCode: created simulation system equations: time 0.1319/13.81, allocations: 48.68 MB / 4.546 GB, free: 340.9 MB / 0.9202 GB
Notification: Performance of simCode: created of all other equations (e.g. parameter, nominal, assert, etc): time 0.09134/13.9, allocations: 13.89 MB / 4.56 GB, free: 337.7 MB / 0.9202 GB
Notification: Performance of simCode: created linear, non-linear and system jacobian parts: time 1.76/15.66, allocations: 389.1 MB / 4.94 GB, free: 351.1 MB / 0.9202 GB
Notification: Performance of simCode: some other stuff during SimCode phase: time 0.043/15.71, allocations: 17.29 MB / 4.957 GB, free: 349.4 MB / 0.9202 GB
Notification: Performance of simCode: alias equations: time 0.03337/15.74, allocations: 4.745 MB / 4.961 GB, free: 349.3 MB / 0.9202 GB
Notification: Performance of simCode: all other stuff during SimCode phase: time 0.02996/15.77, allocations: 16.89 MB / 4.978 GB, free: 337.7 MB / 0.9202 GB
Notification: Performance of SimCode: time 1.723e-06/15.77, allocations: 0 / 4.978 GB, free: 337.7 MB / 0.9202 GB
Notification: Performance of buildModelFMU: Generate the FMI files: time 2.71/18.48, allocations: 1.281 GB / 6.259 GB, free: 152.2 MB / 0.9202 GB
Error: Error building simulator. Build log: cmd: cd '431.fmutmp/sources/' && mkdir build_cmake_static && cd build_cmake_static && cmake -DCMAKE_BUILD_TYPE=Release -DCMAKE_C_COMPILER='clang' .. && cmake --build . --parallel -j1 --target install && cd .. && rm -rf build_cmake_static
-- The C compiler identification is Clang 14.0.0
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/clang - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- FMI2 include directory: /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/fmi
-- Looking for pthread.h
-- Looking for pthread.h - found
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD - Success
-- Found Threads: TRUE  
-- Building for FMI platform linux64
-- Install directory: /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/../binaries/linux64
-- CVODE: Not linked
-- Not using FMI2_FUNCTION_PREFIX
-- Installing dynamic dependencies from list: 
-- Configuring done
-- Generating done
-- Build files have been written to: /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/build_cmake_static
[  0%] Building C object CMakeFiles/431.dir/external_solvers/F77_aloc.c.o
[  1%] Building C object CMakeFiles/431.dir/external_solvers/dgemm.c.o
[  2%] Building C object CMakeFiles/431.dir/external_solvers/dgemv.c.o
[  3%] Building C object CMakeFiles/431.dir/external_solvers/dger.c.o
[  4%] Building C object CMakeFiles/431.dir/external_solvers/dgesv.c.o
[  4%] Building C object CMakeFiles/431.dir/external_solvers/dgetf2.c.o
[  5%] Building C object CMakeFiles/431.dir/external_solvers/dgetrf.c.o
[  6%] Building C object CMakeFiles/431.dir/external_solvers/dgetri.c.o
[  7%] Building C object CMakeFiles/431.dir/external_solvers/dgetrs.c.o
[  8%] Building C object CMakeFiles/431.dir/external_solvers/dlamch.c.o
[  8%] Building C object CMakeFiles/431.dir/external_solvers/dlaswp.c.o
[  9%] Building C object CMakeFiles/431.dir/external_solvers/dogleg_.c.o
[ 10%] Building C object CMakeFiles/431.dir/external_solvers/dpmpar_.c.o
[ 11%] Building C object CMakeFiles/431.dir/external_solvers/dscal.c.o
[ 12%] Building C object CMakeFiles/431.dir/external_solvers/dswap.c.o
[ 13%] Building C object CMakeFiles/431.dir/external_solvers/dtrmm.c.o
[ 13%] Building C object CMakeFiles/431.dir/external_solvers/dtrmv.c.o
[ 14%] Building C object CMakeFiles/431.dir/external_solvers/dtrsm.c.o
[ 15%] Building C object CMakeFiles/431.dir/external_solvers/dtrti2.c.o
[ 16%] Building C object CMakeFiles/431.dir/external_solvers/dtrtri.c.o
[ 17%] Building C object CMakeFiles/431.dir/external_solvers/enorm_.c.o
[ 17%] Building C object CMakeFiles/431.dir/external_solvers/exit_.c.o
[ 18%] Building C object CMakeFiles/431.dir/external_solvers/hybrj_.c.o
[ 19%] Building C object CMakeFiles/431.dir/external_solvers/i_nint.c.o
[ 20%] Building C object CMakeFiles/431.dir/external_solvers/idamax.c.o
[ 21%] Building C object CMakeFiles/431.dir/external_solvers/ieeeck.c.o
[ 21%] Building C object CMakeFiles/431.dir/external_solvers/ilaenv.c.o
[ 22%] Building C object CMakeFiles/431.dir/external_solvers/iparmq.c.o
[ 23%] Building C object CMakeFiles/431.dir/external_solvers/lsame.c.o
[ 24%] Building C object CMakeFiles/431.dir/external_solvers/pow_di.c.o
[ 25%] Building C object CMakeFiles/431.dir/external_solvers/qform_.c.o
[ 26%] Building C object CMakeFiles/431.dir/external_solvers/qrfac_.c.o
[ 26%] Building C object CMakeFiles/431.dir/external_solvers/r1mpyq_.c.o
[ 27%] Building C object CMakeFiles/431.dir/external_solvers/r1updt_.c.o
[ 28%] Building C object CMakeFiles/431.dir/external_solvers/s_cat.c.o
[ 29%] Building C object CMakeFiles/431.dir/external_solvers/s_cmp.c.o
[ 30%] Building C object CMakeFiles/431.dir/external_solvers/s_copy.c.o
[ 30%] Building C object CMakeFiles/431.dir/external_solvers/xerbla.c.o
[ 31%] Building C object CMakeFiles/431.dir/fmi-export/fmu2_model_interface.c.o
[ 32%] Building C object CMakeFiles/431.dir/fmi-export/fmu_read_flags.c.o
[ 33%] Building C object CMakeFiles/431.dir/gc/memory_pool.c.o
[ 34%] Building C object CMakeFiles/431.dir/gc/omc_gc.c.o
[ 34%] Building C object CMakeFiles/431.dir/math-support/pivot.c.o
[ 35%] Building C object CMakeFiles/431.dir/meta/meta_modelica_catch.c.o
[ 36%] Building C object CMakeFiles/431.dir/simulation/arrayIndex.c.o
[ 37%] Building C object CMakeFiles/431.dir/simulation/jacobian_util.c.o
[ 38%] Building C object CMakeFiles/431.dir/simulation/omc_simulation_util.c.o
[ 39%] Building C object CMakeFiles/431.dir/simulation/options.c.o
[ 39%] Building C object CMakeFiles/431.dir/simulation/simulation_info_json.c.o
[ 40%] Building C object CMakeFiles/431.dir/simulation/simulation_omc_assert.c.o
[ 41%] Building C object CMakeFiles/431.dir/simulation/solver/delay.c.o
[ 42%] Building C object CMakeFiles/431.dir/simulation/solver/fmi_events.c.o
[ 43%] Building C object CMakeFiles/431.dir/simulation/solver/initialization/initialization.c.o
[ 43%] Building C object CMakeFiles/431.dir/simulation/solver/linearSolverLapack.c.o
[ 44%] Building C object CMakeFiles/431.dir/simulation/solver/linearSolverTotalPivot.c.o
[ 45%] Building C object CMakeFiles/431.dir/simulation/solver/linearSystem.c.o
[ 46%] Building C object CMakeFiles/431.dir/simulation/solver/model_help.c.o
[ 47%] Building C object CMakeFiles/431.dir/simulation/solver/nonlinearSolverHomotopy.c.o
[ 47%] Building C object CMakeFiles/431.dir/simulation/solver/nonlinearSolverHybrd.c.o
[ 48%] Building C object CMakeFiles/431.dir/simulation/solver/nonlinearSystem.c.o
[ 49%] Building C object CMakeFiles/431.dir/simulation/solver/nonlinearValuesList.c.o
[ 50%] Building C object CMakeFiles/431.dir/simulation/solver/omc_math.c.o
[ 51%] Building C object CMakeFiles/431.dir/simulation/solver/spatialDistribution.c.o
[ 52%] Building C object CMakeFiles/431.dir/simulation/solver/stateset.c.o
[ 52%] Building C object CMakeFiles/431.dir/simulation/solver/synchronous.c.o
[ 53%] Building C object CMakeFiles/431.dir/util/ModelicaUtilities.c.o
[ 54%] Building C object CMakeFiles/431.dir/util/base_array.c.o
[ 55%] Building C object CMakeFiles/431.dir/util/boolean_array.c.o
[ 56%] Building C object CMakeFiles/431.dir/util/context.c.o
[ 56%] Building C object CMakeFiles/431.dir/util/division.c.o
[ 57%] Building C object CMakeFiles/431.dir/util/doubleEndedList.c.o
[ 58%] Building C object CMakeFiles/431.dir/util/generic_array.c.o
[ 59%] Building C object CMakeFiles/431.dir/util/index_spec.c.o
[ 60%] Building C object CMakeFiles/431.dir/util/integer_array.c.o
[ 60%] Building C object CMakeFiles/431.dir/util/list.c.o
[ 61%] Building C object CMakeFiles/431.dir/util/modelica_string.c.o
[ 62%] Building C object CMakeFiles/431.dir/util/modelica_string_lit.c.o
[ 63%] Building C object CMakeFiles/431.dir/util/omc_error.c.o
[ 64%] Building C object CMakeFiles/431.dir/util/omc_file.c.o
[ 65%] Building C object CMakeFiles/431.dir/util/omc_init.c.o
[ 65%] Building C object CMakeFiles/431.dir/util/omc_mmap.c.o
[ 66%] Building C object CMakeFiles/431.dir/util/omc_msvc.c.o
[ 67%] Building C object CMakeFiles/431.dir/util/omc_numbers.c.o
[ 68%] Building C object CMakeFiles/431.dir/util/parallel_helper.c.o
[ 69%] Building C object CMakeFiles/431.dir/util/rational.c.o
[ 69%] Building C object CMakeFiles/431.dir/util/real_array.c.o
[ 70%] Building C object CMakeFiles/431.dir/util/ringbuffer.c.o
[ 71%] Building C object CMakeFiles/431.dir/util/simulation_options.c.o
[ 72%] Building C object CMakeFiles/431.dir/util/string_array.c.o
[ 73%] Building C object CMakeFiles/431.dir/util/utility.c.o
[ 73%] Building C object CMakeFiles/431.dir/util/varinfo.c.o
[ 74%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant.c.o
[ 75%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_01exo.c.o
[ 76%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_02nls.c.o
[ 77%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_02nls_part0.c.o
[ 78%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_02nls_part1.c.o
[ 78%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_03lsy.c.o
[ 79%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_04set.c.o
[ 80%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_05evt.c.o
[ 81%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_06inz.c.o
[ 82%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_06inz_part2.c.o
[ 82%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_06inz_part3.c.o
[ 83%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_06inz_part4.c.o
[ 84%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_07dly.c.o
[ 85%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_08bnd.c.o
[ 86%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_08bnd_part5.c.o
[ 86%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_08bnd_part6.c.o
[ 87%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_08bnd_part7.c.o
[ 88%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_09alg.c.o
[ 89%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_10asr.c.o
[ 90%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_11mix.c.o
[ 91%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_12jac.c.o
[ 91%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_13opt.c.o
[ 92%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_14lnz.c.o
[ 93%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_15syn.c.o
[ 94%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_16dae.c.o
[ 95%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_17inl.c.o
[ 95%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_18spd.c.o
[ 96%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_FMU.c.o
[ 97%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c.o
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:237:331: error: invalid operands to binary expression ('double' and 'real_array' (aka 'struct base_array_s'))
  __omcQ_24ThermoSysPro_24PProperties_24PFlueGases_24PFlueGases_5Fh_24funDERh = (__omcQ_24ThermoSysPro_24PProperties_24PFlueGases_24PFlueGases_5Fh_24funDERstate._T) * (omc__omcQ_24DER_24ThermoSysPro_24PProperties_24PModelicaMediaFlueGases_24Ph_5F_5FTX(threadData, _state._T, _state._X, 1 /* true */, 1, 0.0, 1.0, _OMC_LIT8, 0.0)) + mul_alloc_real_array_scalar(__omcQ_24ThermoSysPro_24PProperties_24PFlueGases_24PFlueGases_5Fh_24funDERstate._X, omc__omcQ_24DER_24ThermoSysPro_24PProperties_24PModelicaMediaFlueGases_24Ph_5F_5FTX(threadData, _state._T, _state._X, 1 /* true */, 1, 0.0, 0.0, _OMC_LIT9, 0.0)) + (__omcQ_24ThermoSysPro_24PProperties_24PFlueGases_24PFlueGases_5Fh_24funDERXh2o) * (_Hlat) - (mul_alloc_real_array_scalar(__omcQ_24ThermoSysPro_24PProperties_24PFlueGases_24PFlueGases_5Fh_24funDERstate0._X, omc__omcQ_24DER_24ThermoSysPro_24PProperties_24PModelicaMediaFlueGases_24Ph_5F_5FTX(threadData, _state0._T, _state0._X, 1 /* true */, 1, 0.0, 0.0, _OMC_LIT9, 0.0))) - ((__omcQ_24ThermoSysPro_24PProperties_24PFlueGases_24PFlueGases_5Fh_24funDERstate0._T) * (omc__omcQ_24DER_24ThermoSysPro_24PProperties_24PModelicaMediaFlueGases_24Ph_5F_5FTX(threadData, _state0._T, _state0._X, 1 /* true */, 1, 0.0, 1.0, _OMC_LIT8, 0.0)));
                                                                                ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1100:31: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
    if((_option_interpolation == ((modelica_integer) 1)))
        ~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1100:31: note: remove extraneous parentheses around the comparison to silence this warning
    if((_option_interpolation == ((modelica_integer) 1)))
       ~                      ^                        ~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1100:31: note: use '=' to turn this equality comparison into an assignment
    if((_option_interpolation == ((modelica_integer) 1)))
                              ^~
                              =
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1106:33: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
      if((_option_interpolation == ((modelica_integer) 2)))
          ~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1106:33: note: remove extraneous parentheses around the comparison to silence this warning
      if((_option_interpolation == ((modelica_integer) 2)))
         ~                      ^                        ~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1106:33: note: use '=' to turn this equality comparison into an assignment
      if((_option_interpolation == ((modelica_integer) 2)))
                                ^~
                                =
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1315:29: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
  if((_option_interpolation == ((modelica_integer) 1)))
      ~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1315:29: note: remove extraneous parentheses around the comparison to silence this warning
  if((_option_interpolation == ((modelica_integer) 1)))
     ~                      ^                        ~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1315:29: note: use '=' to turn this equality comparison into an assignment
  if((_option_interpolation == ((modelica_integer) 1)))
                            ^~
                            =
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1321:31: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
    if((_option_interpolation == ((modelica_integer) 2)))
        ~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1321:31: note: remove extraneous parentheses around the comparison to silence this warning
    if((_option_interpolation == ((modelica_integer) 2)))
       ~                      ^                        ~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1321:31: note: use '=' to turn this equality comparison into an assignment
    if((_option_interpolation == ((modelica_integer) 2)))
                              ^~
                              =
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1527:31: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
    if((_option_interpolation == ((modelica_integer) 1)))
        ~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1527:31: note: remove extraneous parentheses around the comparison to silence this warning
    if((_option_interpolation == ((modelica_integer) 1)))
       ~                      ^                        ~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1527:31: note: use '=' to turn this equality comparison into an assignment
    if((_option_interpolation == ((modelica_integer) 1)))
                              ^~
                              =
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1533:33: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
      if((_option_interpolation == ((modelica_integer) 2)))
          ~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1533:33: note: remove extraneous parentheses around the comparison to silence this warning
      if((_option_interpolation == ((modelica_integer) 2)))
         ~                      ^                        ~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1533:33: note: use '=' to turn this equality comparison into an assignment
      if((_option_interpolation == ((modelica_integer) 2)))
                                ^~
                                =
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1553:31: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
    if((_option_interpolation == ((modelica_integer) 1)))
        ~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1553:31: note: remove extraneous parentheses around the comparison to silence this warning
    if((_option_interpolation == ((modelica_integer) 1)))
       ~                      ^                        ~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1553:31: note: use '=' to turn this equality comparison into an assignment
    if((_option_interpolation == ((modelica_integer) 1)))
                              ^~
                              =
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1559:33: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
      if((_option_interpolation == ((modelica_integer) 2)))
          ~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1559:33: note: remove extraneous parentheses around the comparison to silence this warning
      if((_option_interpolation == ((modelica_integer) 2)))
         ~                      ^                        ~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1559:33: note: use '=' to turn this equality comparison into an assignment
      if((_option_interpolation == ((modelica_integer) 2)))
                                ^~
                                =
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1740:15: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
    if((_IndX == _dimX))
        ~~~~~~^~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1740:15: note: remove extraneous parentheses around the comparison to silence this warning
    if((_IndX == _dimX))
       ~      ^       ~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1740:15: note: use '=' to turn this equality comparison into an assignment
    if((_IndX == _dimX))
              ^~
              =
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1751:15: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
    if((_IndX == ((modelica_integer) 2)))
        ~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1751:15: note: remove extraneous parentheses around the comparison to silence this warning
    if((_IndX == ((modelica_integer) 2)))
       ~      ^                        ~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1751:15: note: use '=' to turn this equality comparison into an assignment
    if((_IndX == ((modelica_integer) 2)))
              ^~
              =
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3345:14: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
  if((_fluid == ((modelica_integer) 1)))
      ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3345:14: note: remove extraneous parentheses around the comparison to silence this warning
  if((_fluid == ((modelica_integer) 1)))
     ~       ^                        ~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3345:14: note: use '=' to turn this equality comparison into an assignment
  if((_fluid == ((modelica_integer) 1)))
             ^~
             =
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3352:16: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
    if((_fluid == ((modelica_integer) 2)))
        ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3352:16: note: remove extraneous parentheses around the comparison to silence this warning
    if((_fluid == ((modelica_integer) 2)))
       ~       ^                        ~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3352:16: note: use '=' to turn this equality comparison into an assignment
    if((_fluid == ((modelica_integer) 2)))
               ^~
               =
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3359:18: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
      if((_fluid == ((modelica_integer) 7)))
          ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3359:18: note: remove extraneous parentheses around the comparison to silence this warning
      if((_fluid == ((modelica_integer) 7)))
         ~       ^                        ~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3359:18: note: use '=' to turn this equality comparison into an assignment
      if((_fluid == ((modelica_integer) 7)))
                 ^~
                 =
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3428:14: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
  if((_fluid == ((modelica_integer) 1)))
      ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3428:14: note: remove extraneous parentheses around the comparison to silence this warning
  if((_fluid == ((modelica_integer) 1)))
     ~       ^                        ~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3428:14: note: use '=' to turn this equality comparison into an assignment
  if((_fluid == ((modelica_integer) 1)))
             ^~
             =
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3435:16: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
    if((_fluid == ((modelica_integer) 2)))
        ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3435:16: note: remove extraneous parentheses around the comparison to silence this warning
    if((_fluid == ((modelica_integer) 2)))
       ~       ^                        ~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3435:16: note: use '=' to turn this equality comparison into an assignment
    if((_fluid == ((modelica_integer) 2)))
               ^~
               =
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3442:18: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
      if((_fluid == ((modelica_integer) 7)))
          ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3442:18: note: remove extraneous parentheses around the comparison to silence this warning
      if((_fluid == ((modelica_integer) 7)))
         ~       ^                        ~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3442:18: note: use '=' to turn this equality comparison into an assignment
      if((_fluid == ((modelica_integer) 7)))
                 ^~
                 =
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:35891:16: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
    if((_phase == ((modelica_integer) 2)))
        ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:35891:16: note: remove extraneous parentheses around the comparison to silence this warning
    if((_phase == ((modelica_integer) 2)))
       ~       ^                        ~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:35891:16: note: use '=' to turn this equality comparison into an assignment
    if((_phase == ((modelica_integer) 2)))
               ^~
               =
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:35909:24: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
            if((_phase == ((modelica_integer) 1)))
                ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:35909:24: note: remove extraneous parentheses around the comparison to silence this warning
            if((_phase == ((modelica_integer) 1)))
               ~       ^                        ~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:35909:24: note: use '=' to turn this equality comparison into an assignment
            if((_phase == ((modelica_integer) 1)))
                       ^~
                       =
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:35940:26: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
              if((_phase == ((modelica_integer) 1)))
                  ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:35940:26: note: remove extraneous parentheses around the comparison to silence this warning
              if((_phase == ((modelica_integer) 1)))
                 ~       ^                        ~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:35940:26: note: use '=' to turn this equality comparison into an assignment
              if((_phase == ((modelica_integer) 1)))
                         ^~
                         =
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39402:15: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
  if((_region == ((modelica_integer) 1)))
      ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39402:15: note: remove extraneous parentheses around the comparison to silence this warning
  if((_region == ((modelica_integer) 1)))
     ~        ^                        ~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39402:15: note: use '=' to turn this equality comparison into an assignment
  if((_region == ((modelica_integer) 1)))
              ^~
              =
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39414:17: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
    if((_region == ((modelica_integer) 2)))
        ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39414:17: note: remove extraneous parentheses around the comparison to silence this warning
    if((_region == ((modelica_integer) 2)))
       ~        ^                        ~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39414:17: note: use '=' to turn this equality comparison into an assignment
    if((_region == ((modelica_integer) 2)))
                ^~
                =
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39426:19: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
      if((_region == ((modelica_integer) 3)))
          ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39426:19: note: remove extraneous parentheses around the comparison to silence this warning
      if((_region == ((modelica_integer) 3)))
         ~        ^                        ~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39426:19: note: use '=' to turn this equality comparison into an assignment
      if((_region == ((modelica_integer) 3)))
                  ^~
                  =
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39440:21: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
        if((_region == ((modelica_integer) 5)))
            ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39440:21: note: remove extraneous parentheses around the comparison to silence this warning
        if((_region == ((modelica_integer) 5)))
           ~        ^                        ~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39440:21: note: use '=' to turn this equality comparison into an assignment
        if((_region == ((modelica_integer) 5)))
                    ^~
                    =
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39544:15: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
  if((_region == ((modelica_integer) 1)))
      ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39544:15: note: remove extraneous parentheses around the comparison to silence this warning
  if((_region == ((modelica_integer) 1)))
     ~        ^                        ~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39544:15: note: use '=' to turn this equality comparison into an assignment
  if((_region == ((modelica_integer) 1)))
              ^~
              =
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39558:17: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
    if((_region == ((modelica_integer) 2)))
        ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39558:17: note: remove extraneous parentheses around the comparison to silence this warning
    if((_region == ((modelica_integer) 2)))
       ~        ^                        ~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39558:17: note: use '=' to turn this equality comparison into an assignment
    if((_region == ((modelica_integer) 2)))
                ^~
                =
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39572:19: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
      if((_region == ((modelica_integer) 3)))
          ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39572:19: note: remove extraneous parentheses around the comparison to silence this warning
      if((_region == ((modelica_integer) 3)))
         ~        ^                        ~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39572:19: note: use '=' to turn this equality comparison into an assignment
      if((_region == ((modelica_integer) 3)))
                  ^~
                  =
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39593:21: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
        if((_region == ((modelica_integer) 4)))
            ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39593:21: note: remove extraneous parentheses around the comparison to silence this warning
        if((_region == ((modelica_integer) 4)))
           ~        ^                        ~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39593:21: note: use '=' to turn this equality comparison into an assignment
        if((_region == ((modelica_integer) 4)))
                    ^~
                    =
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39600:23: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
          if((_region == ((modelica_integer) 5)))
              ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39600:23: note: remove extraneous parentheses around the comparison to silence this warning
          if((_region == ((modelica_integer) 5)))
             ~        ^                        ~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39600:23: note: use '=' to turn this equality comparison into an assignment
          if((_region == ((modelica_integer) 5)))
                      ^~
                      =
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39707:15: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
  if((_region == ((modelica_integer) 1)))
      ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39707:15: note: remove extraneous parentheses around the comparison to silence this warning
  if((_region == ((modelica_integer) 1)))
     ~        ^                        ~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39707:15: note: use '=' to turn this equality comparison into an assignment
  if((_region == ((modelica_integer) 1)))
              ^~
              =
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39721:17: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
    if((_region == ((modelica_integer) 2)))
        ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39721:17: note: remove extraneous parentheses around the comparison to silence this warning
    if((_region == ((modelica_integer) 2)))
       ~        ^                        ~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39721:17: note: use '=' to turn this equality comparison into an assignment
    if((_region == ((modelica_integer) 2)))
                ^~
                =
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39735:19: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
      if((_region == ((modelica_integer) 3)))
          ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39735:19: note: remove extraneous parentheses around the comparison to silence this warning
      if((_region == ((modelica_integer) 3)))
         ~        ^                        ~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39735:19: note: use '=' to turn this equality comparison into an assignment
      if((_region == ((modelica_integer) 3)))
                  ^~
                  =
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39749:21: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
        if((_region == ((modelica_integer) 4)))
            ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39749:21: note: remove extraneous parentheses around the comparison to silence this warning
        if((_region == ((modelica_integer) 4)))
           ~        ^                        ~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39749:21: note: use '=' to turn this equality comparison into an assignment
        if((_region == ((modelica_integer) 4)))
                    ^~
                    =
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39756:23: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
          if((_region == ((modelica_integer) 5)))
              ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39756:23: note: remove extraneous parentheses around the comparison to silence this warning
          if((_region == ((modelica_integer) 5)))
             ~        ^                        ~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39756:23: note: use '=' to turn this equality comparison into an assignment
          if((_region == ((modelica_integer) 5)))
                      ^~
                      =
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39925:15: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
  if((_region == ((modelica_integer) 1)))
      ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39925:15: note: remove extraneous parentheses around the comparison to silence this warning
  if((_region == ((modelica_integer) 1)))
     ~        ^                        ~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39925:15: note: use '=' to turn this equality comparison into an assignment
  if((_region == ((modelica_integer) 1)))
              ^~
              =
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39937:17: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
    if((_region == ((modelica_integer) 2)))
        ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39937:17: note: remove extraneous parentheses around the comparison to silence this warning
    if((_region == ((modelica_integer) 2)))
       ~        ^                        ~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39937:17: note: use '=' to turn this equality comparison into an assignment
    if((_region == ((modelica_integer) 2)))
                ^~
                =
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39949:19: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
      if((_region == ((modelica_integer) 3)))
          ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39949:19: note: remove extraneous parentheses around the comparison to silence this warning
      if((_region == ((modelica_integer) 3)))
         ~        ^                        ~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39949:19: note: use '=' to turn this equality comparison into an assignment
      if((_region == ((modelica_integer) 3)))
                  ^~
                  =
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39963:21: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
        if((_region == ((modelica_integer) 5)))
            ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39963:21: note: remove extraneous parentheses around the comparison to silence this warning
        if((_region == ((modelica_integer) 5)))
           ~        ^                        ~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39963:21: note: use '=' to turn this equality comparison into an assignment
        if((_region == ((modelica_integer) 5)))
                    ^~
                    =
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:40705:18: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
      if((_phase == ((modelica_integer) 2)))
          ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:40705:18: note: remove extraneous parentheses around the comparison to silence this warning
      if((_phase == ((modelica_integer) 2)))
         ~       ^                        ~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:40705:18: note: use '=' to turn this equality comparison into an assignment
      if((_phase == ((modelica_integer) 2)))
                 ^~
                 =
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:40784:18: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
      if((_phase == ((modelica_integer) 2)))
          ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:40784:18: note: remove extraneous parentheses around the comparison to silence this warning
      if((_phase == ((modelica_integer) 2)))
         ~       ^                        ~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:40784:18: note: use '=' to turn this equality comparison into an assignment
      if((_phase == ((modelica_integer) 2)))
                 ^~
                 =
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42229:15: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
  if((_region == ((modelica_integer) 1)))
      ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42229:15: note: remove extraneous parentheses around the comparison to silence this warning
  if((_region == ((modelica_integer) 1)))
     ~        ^                        ~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42229:15: note: use '=' to turn this equality comparison into an assignment
  if((_region == ((modelica_integer) 1)))
              ^~
              =
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42236:17: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
    if((_region == ((modelica_integer) 2)))
        ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42236:17: note: remove extraneous parentheses around the comparison to silence this warning
    if((_region == ((modelica_integer) 2)))
       ~        ^                        ~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42236:17: note: use '=' to turn this equality comparison into an assignment
    if((_region == ((modelica_integer) 2)))
                ^~
                =
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42243:19: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
      if((_region == ((modelica_integer) 4)))
          ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42243:19: note: remove extraneous parentheses around the comparison to silence this warning
      if((_region == ((modelica_integer) 4)))
         ~        ^                        ~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42243:19: note: use '=' to turn this equality comparison into an assignment
      if((_region == ((modelica_integer) 4)))
                  ^~
                  =
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42320:15: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
  if((_region == ((modelica_integer) 1)))
      ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42320:15: note: remove extraneous parentheses around the comparison to silence this warning
  if((_region == ((modelica_integer) 1)))
     ~        ^                        ~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42320:15: note: use '=' to turn this equality comparison into an assignment
  if((_region == ((modelica_integer) 1)))
              ^~
              =
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42327:17: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
    if((_region == ((modelica_integer) 2)))
        ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42327:17: note: remove extraneous parentheses around the comparison to silence this warning
    if((_region == ((modelica_integer) 2)))
       ~        ^                        ~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42327:17: note: use '=' to turn this equality comparison into an assignment
    if((_region == ((modelica_integer) 2)))
                ^~
                =
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42334:19: warning: equality comparison with extraneous parentheses [-Wparentheses-equality]
      if((_region == ((modelica_integer) 4)))
          ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42334:19: note: remove extraneous parentheses around the comparison to silence this warning
      if((_region == ((modelica_integer) 4)))
         ~        ^                        ~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42334:19: note: use '=' to turn this equality comparison into an assignment
      if((_region == ((modelica_integer) 4)))
                  ^~
                  =
45 warnings and 1 error generated.
gmake[2]: *** [CMakeFiles/431.dir/build.make:1742: CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c.o] Error 1
gmake[1]: *** [CMakeFiles/Makefile2:84: CMakeFiles/431.dir/all] Error 2
gmake: *** [Makefile:136: all] Error 2
"
[Timeout remaining time 567]
[Calling sys.exit(0), Time elapsed: 94.28019314212725]
Failed to read output from testmodel.py, exit status != 0:
92.88974130991846 92.900331286 89.585521103
Calling exit ...
<OMPython.OMCSessionZMQ object at 0x7f7c0006efb0>