Running: ./testmodel.py --libraries=/home/hudson/saved_omc/libraries/.openmodelica/libraries --ompython_omhome=/usr ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant.conf.json loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/package.mo", uses=false) [Timeout 180] "Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/package.mo): time 0.5427/0.5427, allocations: 145.4 MB / 164.3 MB, free: 11.45 MB / 138.7 MB " [Timeout remaining time 179] Using package ThermoSysPro with version 4.2 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/package.mo) Running command: setCommandLineOptions("--fmiFlags=s:cvode") Running command: "" <> buildModelFMU(ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant,fileNamePrefix="ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant",fmuType="me_cs",version="2.0",platforms={"static"}) "" <> buildModelFMU(ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant,fileNamePrefix="ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant",fmuType="me_cs",version="2.0",platforms={"static"}) [Timeout 660] "Notification: Performance of FrontEnd - loaded program: time 0.0004773/0.0004773, allocations: 11.98 kB / 243.4 MB, free: 8.488 MB / 202.7 MB Notification: Performance of FrontEnd - Absyn->SCode: time 0.1296/0.1301, allocations: 33.57 MB / 277 MB, free: 9.266 MB / 218.7 MB Notification: Automatically loaded package Complex 4.1.0 due to uses annotation from Modelica. Notification: Automatically loaded package ModelicaServices 4.1.0 due to uses annotation from Modelica. Notification: Automatically loaded package Modelica 4.1.0 due to usage. Notification: Performance of NFInst.instantiate(ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant): time 1.285/1.415, allocations: 386.2 MB / 0.6477 GB, free: 11.71 MB / 0.5105 GB Notification: Performance of NFInst.instExpressions: time 0.4899/1.905, allocations: 200.3 MB / 0.8432 GB, free: 14.31 MB / 0.6198 GB Notification: Performance of NFInst.updateImplicitVariability: time 0.01343/1.918, allocations: 186.9 kB / 0.8434 GB, free: 14.28 MB / 0.6198 GB [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:36:3-37:80:writable] Warning: Connector Ce is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:38:3-39:78:writable] Warning: Connector Cs is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:42:3-43:99:writable] Warning: Connector M is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeD.mo:20:3-21:80:writable] Warning: Connector Ce is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeD.mo:22:3-23:78:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeD.mo:24:3-25:80:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeD.mo:26:3-27:78:writable] Warning: Connector Cs3 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:36:3-37:80:writable] Warning: Connector Ce is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:38:3-39:78:writable] Warning: Connector Cs is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:42:3-43:99:writable] Warning: Connector M is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:36:3-37:80:writable] Warning: Connector Ce is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:38:3-39:78:writable] Warning: Connector Cs is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:42:3-43:99:writable] Warning: Connector M is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:36:3-37:80:writable] Warning: Connector Ce is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:38:3-39:78:writable] Warning: Connector Cs is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:42:3-43:99:writable] Warning: Connector M is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:36:3-37:80:writable] Warning: Connector Ce is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:38:3-39:78:writable] Warning: Connector Cs is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:42:3-43:99:writable] Warning: Connector M is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:36:3-37:80:writable] Warning: Connector Ce is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:38:3-39:78:writable] Warning: Connector Cs is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:42:3-43:99:writable] Warning: Connector M is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:36:3-37:80:writable] Warning: Connector Ce is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:38:3-39:78:writable] Warning: Connector Cs is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:42:3-43:99:writable] Warning: Connector M is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:36:3-37:80:writable] Warning: Connector Ce is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:38:3-39:78:writable] Warning: Connector Cs is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:42:3-43:99:writable] Warning: Connector M is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:18:3-19:80:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:20:3-21:78:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:22:3-23:78:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:26:3-27:80:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:18:3-19:80:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:20:3-21:78:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:22:3-23:78:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:26:3-27:80:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:21:3-22:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:23:3-24:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:18:3-19:80:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:20:3-21:78:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:22:3-23:78:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:26:3-27:80:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:18:3-19:80:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:20:3-21:78:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:22:3-23:78:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:26:3-27:80:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:21:3-22:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:23:3-24:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:18:3-19:80:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:20:3-21:78:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:22:3-23:78:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:26:3-27:80:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:21:3-22:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:23:3-24:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:18:3-19:80:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:20:3-21:78:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:22:3-23:78:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:26:3-27:80:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:21:3-22:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:23:3-24:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/BoundaryConditions/SinkP.mo:19:3-20:80:writable] Warning: Connector C is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/BoundaryConditions/SourceQ.mo:13:3-14:78:writable] Warning: Connector C is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:21:3-22:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:23:3-24:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/SimpleDynamicCondenser.mo:59:3-60:78:writable] Warning: Connector Cv is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/SimpleDynamicCondenser.mo:61:3-62:79:writable] Warning: Connector Cl is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/SimpleDynamicCondenser.mo:67:3-68:81:writable] Warning: Connector Cee is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/SimpleDynamicCondenser.mo:69:3-70:79:writable] Warning: Connector Cse is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StaticCentrifugalPump.mo:33:3-34:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StaticCentrifugalPump.mo:35:3-36:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/StaticWaterWaterExchangerDTorWorEff.mo:36:3-37:78:writable] Warning: Connector Ec is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/StaticWaterWaterExchangerDTorWorEff.mo:38:3-39:80:writable] Warning: Connector Ef is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/StaticWaterWaterExchangerDTorWorEff.mo:40:3-41:77:writable] Warning: Connector Sf is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/StaticWaterWaterExchangerDTorWorEff.mo:42:3-43:76:writable] Warning: Connector Sc is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:38:3-39:80:writable] Warning: Connector Ee is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:40:3-41:78:writable] Warning: Connector Se is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:42:3-43:78:writable] Warning: Connector Ep is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:44:3-45:80:writable] Warning: Connector Sp is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:46:3-47:76:writable] Warning: Connector Ev is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:38:3-39:80:writable] Warning: Connector Ee is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:40:3-41:78:writable] Warning: Connector Se is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:42:3-43:78:writable] Warning: Connector Ep is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:44:3-45:80:writable] Warning: Connector Sp is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:46:3-47:76:writable] Warning: Connector Ev is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:38:3-39:80:writable] Warning: Connector Ee is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:40:3-41:78:writable] Warning: Connector Se is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:42:3-43:78:writable] Warning: Connector Ep is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:44:3-45:80:writable] Warning: Connector Sp is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:46:3-47:76:writable] Warning: Connector Ev is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:38:3-39:80:writable] Warning: Connector Ee is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:40:3-41:78:writable] Warning: Connector Se is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:42:3-43:78:writable] Warning: Connector Ep is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:44:3-45:80:writable] Warning: Connector Sp is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:46:3-47:76:writable] Warning: Connector Ev is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:21:3-22:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:23:3-24:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeI.mo:20:3-22:80:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeI.mo:23:3-25:81:writable] Warning: Connector Ce3 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeI.mo:26:3-28:80:writable] Warning: Connector Ce4 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeI.mo:29:3-31:79:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeI.mo:32:3-34:78:writable] Warning: Connector Cs4 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeI.mo:35:3-37:77:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeI.mo:38:3-40:78:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeI.mo:41:3-43:79:writable] Warning: Connector Cs3 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:21:3-22:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:23:3-24:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeI.mo:20:3-22:80:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeI.mo:23:3-25:81:writable] Warning: Connector Ce3 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeI.mo:26:3-28:80:writable] Warning: Connector Ce4 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeI.mo:29:3-31:79:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeI.mo:32:3-34:78:writable] Warning: Connector Cs4 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeI.mo:35:3-37:77:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeI.mo:38:3-40:78:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeI.mo:41:3-43:79:writable] Warning: Connector Cs3 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StaticCentrifugalPump.mo:33:3-34:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StaticCentrifugalPump.mo:35:3-36:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:38:3-39:80:writable] Warning: Connector Ee is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:40:3-41:78:writable] Warning: Connector Se is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:42:3-43:78:writable] Warning: Connector Ep is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:44:3-45:80:writable] Warning: Connector Sp is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:46:3-47:76:writable] Warning: Connector Ev is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:21:3-22:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:23:3-24:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:38:3-39:80:writable] Warning: Connector Ee is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:40:3-41:78:writable] Warning: Connector Se is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:42:3-43:78:writable] Warning: Connector Ep is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:44:3-45:80:writable] Warning: Connector Sp is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:46:3-47:76:writable] Warning: Connector Ev is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:21:3-22:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:23:3-24:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:38:3-39:80:writable] Warning: Connector Ee is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:40:3-41:78:writable] Warning: Connector Se is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:42:3-43:78:writable] Warning: Connector Ep is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:44:3-45:80:writable] Warning: Connector Sp is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:46:3-47:76:writable] Warning: Connector Ev is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/StaticWaterWaterExchangerDTorWorEff.mo:36:3-37:78:writable] Warning: Connector Ec is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/StaticWaterWaterExchangerDTorWorEff.mo:38:3-39:80:writable] Warning: Connector Ef is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/StaticWaterWaterExchangerDTorWorEff.mo:40:3-41:77:writable] Warning: Connector Sf is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/StaticWaterWaterExchangerDTorWorEff.mo:42:3-43:76:writable] Warning: Connector Sc is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:21:3-22:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:23:3-24:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:21:3-22:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:23:3-24:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:36:3-37:80:writable] Warning: Connector Ce is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:38:3-39:78:writable] Warning: Connector Cs is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:42:3-43:99:writable] Warning: Connector M is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeD.mo:20:3-21:80:writable] Warning: Connector Ce is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeD.mo:22:3-23:78:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeD.mo:24:3-25:80:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeD.mo:26:3-27:78:writable] Warning: Connector Cs3 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Sensors/SensorT.mo:14:3-15:81:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Sensors/SensorT.mo:16:3-17:79:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/ControlValve.mo:24:3-25:81:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/ControlValve.mo:26:3-27:79:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/ControlValve.mo:24:3-25:81:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/ControlValve.mo:26:3-27:79:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/Combustion/CombustionChambers/GenericCombustion1D.mo:73:3-74:81:writable] Warning: Connector Cfuel is not balanced: The number of potential variables (14) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/Combustion/CombustionChambers/GenericCombustion1D.mo:75:3-76:80:writable] Warning: Connector Ca is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/Combustion/CombustionChambers/GenericCombustion1D.mo:77:3-78:78:writable] Warning: Connector Cfg is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/Combustion/CombustionChambers/GenericCombustion1D.mo:79:3-80:79:writable] Warning: Connector Cws is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/DynamicOnePhaseFlowPipe.mo:58:3-59:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/DynamicOnePhaseFlowPipe.mo:60:3-61:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/FlueGases/Junctions/Splitter2.mo:17:3-18:80:writable] Warning: Connector Ce is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/FlueGases/Junctions/Splitter2.mo:19:3-20:77:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/FlueGases/Junctions/Splitter2.mo:21:3-22:79:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/FlueGases/HeatExchangers/StaticWallFlueGasesExchanger.mo:48:3-49:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/FlueGases/HeatExchangers/StaticWallFlueGasesExchanger.mo:52:3-53:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/DynamicTwoPhaseFlowPipe.mo:90:3-91:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/DynamicTwoPhaseFlowPipe.mo:94:3-95:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:16:3-17:77:writable] Warning: Connector Cfg1 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:18:3-19:79:writable] Warning: Connector Cfg2 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:20:3-21:80:writable] Warning: Connector Cws1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:22:3-23:78:writable] Warning: Connector Cws2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/FlueGases/BoundaryConditions/Sink.mo:12:3-13:80:writable] Warning: Connector C is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/FlueGases/HeatExchangers/StaticWallFlueGasesExchanger.mo:48:3-49:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/FlueGases/HeatExchangers/StaticWallFlueGasesExchanger.mo:52:3-53:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/DynamicTwoPhaseFlowPipe.mo:90:3-91:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/DynamicTwoPhaseFlowPipe.mo:94:3-95:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:16:3-17:77:writable] Warning: Connector Cfg1 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:18:3-19:79:writable] Warning: Connector Cfg2 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:20:3-21:80:writable] Warning: Connector Cws1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:22:3-23:78:writable] Warning: Connector Cws2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/FlueGases/HeatExchangers/StaticWallFlueGasesExchanger.mo:48:3-49:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/FlueGases/HeatExchangers/StaticWallFlueGasesExchanger.mo:52:3-53:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/DynamicTwoPhaseFlowPipe.mo:90:3-91:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/DynamicTwoPhaseFlowPipe.mo:94:3-95:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:16:3-17:77:writable] Warning: Connector Cfg1 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:18:3-19:79:writable] Warning: Connector Cfg2 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:20:3-21:80:writable] Warning: Connector Cws1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:22:3-23:78:writable] Warning: Connector Cws2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/SingularPressureLoss.mo:15:3-16:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/SingularPressureLoss.mo:17:3-18:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/FlueGases/HeatExchangers/StaticWallFlueGasesExchanger.mo:48:3-49:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/FlueGases/HeatExchangers/StaticWallFlueGasesExchanger.mo:52:3-53:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/DynamicTwoPhaseFlowPipe.mo:90:3-91:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/DynamicTwoPhaseFlowPipe.mo:94:3-95:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:16:3-17:77:writable] Warning: Connector Cfg1 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:18:3-19:79:writable] Warning: Connector Cfg2 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:20:3-21:80:writable] Warning: Connector Cws1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:22:3-23:78:writable] Warning: Connector Cws2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/SingularPressureLoss.mo:15:3-16:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/SingularPressureLoss.mo:17:3-18:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/FlueGases/HeatExchangers/StaticWallFlueGasesExchanger.mo:48:3-49:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/FlueGases/HeatExchangers/StaticWallFlueGasesExchanger.mo:52:3-53:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/DynamicTwoPhaseFlowPipe.mo:90:3-91:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/DynamicTwoPhaseFlowPipe.mo:94:3-95:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:16:3-17:77:writable] Warning: Connector Cfg1 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:18:3-19:79:writable] Warning: Connector Cfg2 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:20:3-21:80:writable] Warning: Connector Cws1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:22:3-23:78:writable] Warning: Connector Cws2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/FlueGases/HeatExchangers/StaticWallFlueGasesExchanger.mo:48:3-49:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/FlueGases/HeatExchangers/StaticWallFlueGasesExchanger.mo:52:3-53:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/DynamicTwoPhaseFlowPipe.mo:90:3-91:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/DynamicTwoPhaseFlowPipe.mo:94:3-95:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:16:3-17:77:writable] Warning: Connector Cfg1 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:18:3-19:79:writable] Warning: Connector Cfg2 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:20:3-21:80:writable] Warning: Connector Cws1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/MultiFluids/HeatExchangers/DynamicExchangerWaterSteamFlueGases.mo:22:3-23:78:writable] Warning: Connector Cws2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/FlueGases/PressureLosses/InvSingularPressureLoss.mo:11:3-12:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/FlueGases/PressureLosses/InvSingularPressureLoss.mo:13:3-14:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/FlueGases/Junctions/Mixer2.mo:17:3-18:81:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/FlueGases/Junctions/Mixer2.mo:19:3-20:78:writable] Warning: Connector Cs is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/FlueGases/Junctions/Mixer2.mo:21:3-22:79:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/FlueGases/HeatExchangers/StaticFluegasesFluegasesExchangerKS.mo:20:3-21:78:writable] Warning: Connector Sc is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/FlueGases/HeatExchangers/StaticFluegasesFluegasesExchangerKS.mo:22:3-23:80:writable] Warning: Connector Ec is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/FlueGases/HeatExchangers/StaticFluegasesFluegasesExchangerKS.mo:24:3-25:80:writable] Warning: Connector Ef is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/FlueGases/HeatExchangers/StaticFluegasesFluegasesExchangerKS.mo:26:3-27:78:writable] Warning: Connector Sf is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/FlueGases/BoundaryConditions/SourcePQ.mo:15:3-16:78:writable] Warning: Connector C is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/FlueGases/Volumes/VolumeATh.mo:36:3-37:80:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/FlueGases/Volumes/VolumeATh.mo:38:3-39:80:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/FlueGases/Volumes/VolumeATh.mo:40:3-41:78:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/FlueGases/Volumes/VolumeATh.mo:44:3-45:78:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:18:3-19:80:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:20:3-21:78:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:22:3-23:78:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:26:3-27:80:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:18:3-19:80:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:20:3-21:78:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:22:3-23:78:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:26:3-27:80:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/BoundaryConditions/SourcePQ.mo:16:3-17:78:writable] Warning: Connector C is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/Combustion/BoundaryConditions/FuelSourcePQ.mo:18:3-19:78:writable] Warning: Connector C is not balanced: The number of potential variables (14) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/ControlValve.mo:24:3-25:81:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/ControlValve.mo:26:3-27:79:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/LoopBreakers/LoopBreakerP.mo:4:3-5:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/LoopBreakers/LoopBreakerP.mo:6:3-7:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/LoopBreakers/LoopBreakerP.mo:4:3-5:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/LoopBreakers/LoopBreakerP.mo:6:3-7:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/LoopBreakers/LoopBreakerP.mo:4:3-5:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/LoopBreakers/LoopBreakerP.mo:6:3-7:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Sensors/SensorQ.mo:8:3-9:81:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Sensors/SensorQ.mo:10:3-11:79:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Sensors/SensorQ.mo:8:3-9:81:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Sensors/SensorQ.mo:10:3-11:79:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:21:3-22:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:23:3-24:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/ControlValve.mo:24:3-25:81:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/ControlValve.mo:26:3-27:79:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:21:3-22:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:23:3-24:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:21:3-22:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:23:3-24:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:18:3-19:80:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:20:3-21:78:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:22:3-23:78:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:26:3-27:80:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/SingularPressureLoss.mo:15:3-16:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/SingularPressureLoss.mo:17:3-18:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/CheckValve.mo:23:3-24:81:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/CheckValve.mo:25:3-26:79:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Sensors/SensorQ.mo:8:3-9:81:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Sensors/SensorQ.mo:10:3-11:79:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeB.mo:20:3-21:80:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeB.mo:22:3-23:78:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeB.mo:24:3-25:78:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeB.mo:26:3-27:80:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:38:3-39:80:writable] Warning: Connector Ee is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:40:3-41:78:writable] Warning: Connector Se is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:42:3-43:78:writable] Warning: Connector Ep is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:44:3-45:80:writable] Warning: Connector Sp is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:46:3-47:76:writable] Warning: Connector Ev is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:38:3-39:80:writable] Warning: Connector Ee is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:40:3-41:78:writable] Warning: Connector Se is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:42:3-43:78:writable] Warning: Connector Ep is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:44:3-45:80:writable] Warning: Connector Sp is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/HeatExchangers/NTUWaterHeating.mo:46:3-47:76:writable] Warning: Connector Ev is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeB.mo:20:3-21:80:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeB.mo:22:3-23:78:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeB.mo:24:3-25:78:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeB.mo:26:3-27:80:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeB.mo:20:3-21:80:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeB.mo:22:3-23:78:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeB.mo:24:3-25:78:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeB.mo:26:3-27:80:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:18:3-19:80:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:20:3-21:78:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:22:3-23:78:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:26:3-27:80:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:18:3-19:80:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:20:3-21:78:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:22:3-23:78:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:26:3-27:80:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/SingularPressureLoss.mo:15:3-16:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/SingularPressureLoss.mo:17:3-18:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/LoopBreakers/LoopBreakerP.mo:4:3-5:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/LoopBreakers/LoopBreakerP.mo:6:3-7:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/SingularPressureLoss.mo:15:3-16:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/SingularPressureLoss.mo:17:3-18:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/SingularPressureLoss.mo:15:3-16:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/SingularPressureLoss.mo:17:3-18:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/SingularPressureLoss.mo:15:3-16:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/SingularPressureLoss.mo:17:3-18:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/SingularPressureLoss.mo:15:3-16:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/SingularPressureLoss.mo:17:3-18:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/SingularPressureLoss.mo:15:3-16:80:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/SingularPressureLoss.mo:17:3-18:78:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:18:3-19:80:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:20:3-21:78:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:22:3-23:78:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:26:3-27:80:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:18:3-19:80:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:20:3-21:78:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:22:3-23:78:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Volumes/VolumeA.mo:26:3-27:80:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0). Notification: Performance of NFTyping.typeComponents: time 0.01174/1.93, allocations: 4.136 MB / 0.8475 GB, free: 11.02 MB / 0.6198 GB Notification: Performance of NFTyping.typeBindings: time 0.0329/1.963, allocations: 11.98 MB / 0.8591 GB, free: 3.25 MB / 0.6198 GB [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/Properties/WaterSteam/IF97_packages.mo:470:9-470:27:writable] Warning: cv was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/Properties/WaterSteam/IF97_packages.mo:525:9-525:27:writable] Warning: cv was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/Properties/WaterSteam/IF97_packages.mo:708:9-708:27:writable] Warning: cv was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/Properties/WaterSteamSimple/prop4_Ph.mo:51:3-51:60:writable] Warning: dh1satp was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/Properties/WaterSteamSimple/prop4_Ph.mo:51:3-51:60:writable] Warning: dh2satp was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/Properties/WaterSteamSimple/prop4_Ph_der.mo:118:3-118:151:writable] Warning: du1satp_der was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/Properties/WaterSteamSimple/prop4_Ph_der.mo:118:3-118:151:writable] Warning: du2satp_der was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/Properties/WaterSteam/IF97_packages.mo:964:9-964:35:writable] Warning: h was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/Properties/WaterSteamSimple/prop4_Ps.mo:51:3-51:60:writable] Warning: dh1satp was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/Properties/WaterSteamSimple/prop4_Ps.mo:51:3-51:60:writable] Warning: dh2satp was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed. Notification: Performance of NFTyping.typeClassSections: time 0.05624/2.019, allocations: 24 MB / 0.8826 GB, free: 2.879 MB / 0.6355 GB Notification: Performance of NFFlatten.flatten: time 0.05142/2.071, allocations: 54.64 MB / 0.936 GB, free: 432 kB / 0.6823 GB Notification: Performance of NFFlatten.resolveConnections: time 0.0224/2.093, allocations: 15.15 MB / 0.9507 GB, free: 1.418 MB / 0.698 GB Notification: Performance of NFEvalConstants.evaluate: time 0.03061/2.124, allocations: 19.57 MB / 0.9699 GB, free: 14.26 MB / 0.7292 GB Notification: Performance of NFSimplifyModel.simplify: time 0.02885/2.153, allocations: 18.27 MB / 0.9877 GB, free: 12.65 MB / 0.7448 GB Notification: Performance of NFPackage.collectConstants: time 0.01311/2.166, allocations: 3.527 MB / 0.9911 GB, free: 9.121 MB / 0.7448 GB Notification: Performance of NFFlatten.collectFunctions: time 0.05063/2.216, allocations: 30 MB / 1.02 GB, free: 11.39 MB / 0.7761 GB Notification: Performance of NFScalarize.scalarize: time 0.01605/2.232, allocations: 10.03 MB / 1.03 GB, free: 1.527 MB / 0.7761 GB Notification: Performance of NFVerifyModel.verify: time 0.02999/2.262, allocations: 14.76 MB / 1.045 GB, free: 2.895 MB / 0.7917 GB Notification: Performance of NFConvertDAE.convert: time 0.7469/3.009, allocations: 56.86 MB / 1.1 GB, free: 121.9 MB / 0.8074 GB Notification: Performance of FrontEnd - DAE generated: time 6.052e-06/3.009, allocations: 0 / 1.1 GB, free: 121.9 MB / 0.8074 GB Notification: Performance of FrontEnd: time 1.793e-06/3.009, allocations: 0 / 1.1 GB, free: 121.9 MB / 0.8074 GB Notification: Performance of Transformations before backend: time 0.002105/3.011, allocations: 1.5 kB / 1.1 GB, free: 121.9 MB / 0.8074 GB Notification: Model statistics after passing the front-end and creating the data structures used by the back-end: * Number of equations: 8847 * Number of variables: 8847 Notification: Performance of Generate backend data structure: time 0.1367/3.148, allocations: 50.93 MB / 1.15 GB, free: 109.7 MB / 0.8074 GB Notification: Performance of prepare preOptimizeDAE: time 5.036e-05/3.148, allocations: 11.67 kB / 1.15 GB, free: 109.7 MB / 0.8074 GB Notification: Performance of preOpt introduceOutputAliases (simulation): time 0.01722/3.165, allocations: 3.981 MB / 1.154 GB, free: 109.5 MB / 0.8074 GB Notification: Performance of preOpt normalInlineFunction (simulation): time 0.02184/3.187, allocations: 4.574 MB / 1.158 GB, free: 107.4 MB / 0.8074 GB Notification: Performance of preOpt evaluateParameters (simulation): time 0.0259/3.213, allocations: 10.28 MB / 1.168 GB, free: 103.6 MB / 0.8074 GB Notification: Performance of preOpt simplifyIfEquations (simulation): time 0.008256/3.221, allocations: 11.44 MB / 1.18 GB, free: 92.66 MB / 0.8074 GB Notification: Performance of preOpt expandDerOperator (simulation): time 0.01309/3.234, allocations: 2.105 MB / 1.182 GB, free: 92.62 MB / 0.8074 GB Notification: Performance of preOpt clockPartitioning (simulation): time 0.1031/3.337, allocations: 45.59 MB / 1.226 GB, free: 53.98 MB / 0.8074 GB Notification: Performance of preOpt findStateOrder (simulation): time 0.0007975/3.338, allocations: 61.38 kB / 1.226 GB, free: 53.95 MB / 0.8074 GB Notification: Performance of preOpt replaceEdgeChange (simulation): time 0.01271/3.351, allocations: 0.871 MB / 1.227 GB, free: 53.08 MB / 0.8074 GB Notification: Performance of preOpt inlineArrayEqn (simulation): time 0.0009784/3.352, allocations: 1.292 MB / 1.228 GB, free: 51.79 MB / 0.8074 GB Notification: Performance of preOpt removeEqualRHS (simulation): time 0.0839/3.436, allocations: 46.99 MB / 1.274 GB, free: 5.043 MB / 0.8074 GB Warning: The model contains alias variables with redundant start and/or conflicting nominal values. It is recommended to resolve the conflicts, because otherwise the system could be hard to solve. To print the conflicting alias sets and the chosen candidates please use -d=aliasConflicts. Notification: Performance of preOpt removeSimpleEquations (simulation): time 0.5017/3.938, allocations: 142.1 MB / 1.413 GB, free: 428.3 MB / 0.9324 GB Notification: Performance of preOpt comSubExp (simulation): time 0.06606/4.004, allocations: 36.34 MB / 1.448 GB, free: 425.9 MB / 0.9324 GB Notification: Performance of preOpt resolveLoops (simulation): time 0.04959/4.053, allocations: 26.94 MB / 1.475 GB, free: 415.5 MB / 0.9324 GB Notification: Performance of preOpt evalFunc (simulation): time 0.1648/4.218, allocations: 107.6 MB / 1.58 GB, free: 354.4 MB / 0.9324 GB Notification: Performance of preOpt encapsulateWhenConditions (simulation): time 0.06492/4.283, allocations: 31.91 MB / 1.611 GB, free: 322.4 MB / 0.9324 GB Notification: Performance of pre-optimization done (n=5838): time 3.465e-05/4.283, allocations: 1.531 kB / 1.611 GB, free: 322.4 MB / 0.9324 GB Notification: Performance of matching and sorting (n=5848): time 0.6391/4.922, allocations: 270.4 MB / 1.875 GB, free: 54.14 MB / 0.9324 GB Notification: Performance of inlineWhenForInitialization (initialization): time 0.0002167/4.922, allocations: 1.06 MB / 1.876 GB, free: 52.89 MB / 0.9324 GB Notification: Performance of selectInitializationVariablesDAE (initialization): time 0.007629/4.93, allocations: 7.114 MB / 1.883 GB, free: 45.8 MB / 0.9324 GB Notification: Performance of collectPreVariables (initialization): time 0.009529/4.939, allocations: 429.7 kB / 1.883 GB, free: 45.38 MB / 0.9324 GB [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/CheckValve.mo:6:3-6:96:writable] Warning: The parameter CheckValve.k has fixed = false and a binding equation CheckValve.k = 100.0, which is probably redundant. Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/SingularPressureLoss.mo:4:3-4:55:writable] Warning: The parameter singularPressureLoss_Eco.K has fixed = false and a binding equation singularPressureLoss_Eco.K = 3867.0, which is probably redundant. Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:4:3-4:61:writable] Warning: The parameter lumpedStraightPipe_HP2.K has fixed = false and a binding equation lumpedStraightPipe_HP2.K = 1e-4, which is probably redundant. Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/SingularPressureLoss.mo:4:3-4:55:writable] Warning: The parameter singularPressureLoss_RBT.K has fixed = false and a binding equation singularPressureLoss_RBT.K = 34.39, which is probably redundant. Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/SingularPressureLoss.mo:4:3-4:55:writable] Warning: The parameter singularPressureLoss_SBT.K has fixed = false and a binding equation singularPressureLoss_SBT.K = 910.878, which is probably redundant. Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/ControlValve.mo:4:3-4:103:writable] Warning: The parameter controlValveIP.Cvmax has fixed = false and a binding equation controlValveIP.Cvmax = 8005.0, which is probably redundant. Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/ControlValve.mo:4:3-4:103:writable] Warning: The parameter controlValveHP.Cvmax has fixed = false and a binding equation controlValveHP.Cvmax = 8005.0, which is probably redundant. Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:4:3-4:60:writable] Warning: The parameter Turbine_HP1.Cst has fixed = false and a binding equation Turbine_HP1.Cst = 279474.0, which is probably redundant. Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:4:3-4:61:writable] Warning: The parameter lumpedStraightPipe_HP_IP.K has fixed = false and a binding equation lumpedStraightPipe_HP_IP.K = 10.0, which is probably redundant. Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:4:3-4:61:writable] Warning: The parameter lumpedStraightPipe_HP.K has fixed = false and a binding equation lumpedStraightPipe_HP.K = 10.0, which is probably redundant. Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:4:3-4:61:writable] Warning: The parameter lumpedStraightPipe_HP1.K has fixed = false and a binding equation lumpedStraightPipe_HP1.K = 10.0, which is probably redundant. Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StaticCentrifugalPump.mo:14:3-14:94:writable] Warning: The parameter staticCentrifugalPump1.a1 has fixed = false and a binding equation staticCentrifugalPump1.a1 = -3050.0, which is probably redundant. Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:4:3-4:61:writable] Warning: The parameter lumpedStraightPipe_IP1.K has fixed = false and a binding equation lumpedStraightPipe_IP1.K = 10.0, which is probably redundant. Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StaticCentrifugalPump.mo:14:3-14:94:writable] Warning: The parameter staticCentrifugalPump.a1 has fixed = false and a binding equation staticCentrifugalPump.a1 = -390.0, which is probably redundant. Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:4:3-4:61:writable] Warning: The parameter lumpedStraightPipe_LP3.K has fixed = false and a binding equation lumpedStraightPipe_LP3.K = 10.0, which is probably redundant. Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:4:3-4:61:writable] Warning: The parameter lumpedStraightPipe_LP2.K has fixed = false and a binding equation lumpedStraightPipe_LP2.K = 10.0, which is probably redundant. Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:4:3-4:61:writable] Warning: The parameter lumpedStraightPipe_LP1.K has fixed = false and a binding equation lumpedStraightPipe_LP1.K = 10.0, which is probably redundant. Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/PressureLosses/PipePressureLoss.mo:4:3-4:61:writable] Warning: The parameter lumpedStraightPipe_IP3.K has fixed = false and a binding equation lumpedStraightPipe_IP3.K = 10.0, which is probably redundant. Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:4:3-4:60:writable] Warning: The parameter Echappement.Cst has fixed = false and a binding equation Echappement.Cst = 14.7, which is probably redundant. Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:4:3-4:60:writable] Warning: The parameter Turbine_LP3.Cst has fixed = false and a binding equation Turbine_LP3.Cst = 59.4076, which is probably redundant. Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:4:3-4:60:writable] Warning: The parameter Turbine_IP3.Cst has fixed = false and a binding equation Turbine_IP3.Cst = 34076.9, which is probably redundant. Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:4:3-4:60:writable] Warning: The parameter Turbine_LP1.Cst has fixed = false and a binding equation Turbine_LP1.Cst = 4485.97, which is probably redundant. Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:4:3-4:60:writable] Warning: The parameter Turbine_IP1.Cst has fixed = false and a binding equation Turbine_IP1.Cst = 102478.0, which is probably redundant. Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:4:3-4:60:writable] Warning: The parameter Turbine_LP2.Cst has fixed = false and a binding equation Turbine_LP2.Cst = 1215.75, which is probably redundant. Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:4:3-4:60:writable] Warning: The parameter Turbine_IP2.Cst has fixed = false and a binding equation Turbine_IP2.Cst = 53802.6, which is probably redundant. Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.2.0-master/WaterSteam/Machines/StodolaTurbine.mo:4:3-4:60:writable] Warning: The parameter Turbine_HP.Cst has fixed = false and a binding equation Turbine_HP.Cst = 2.00537e6, which is probably redundant. Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding. Notification: Performance of collectInitialEqns (initialization): time 0.004497/4.944, allocations: 6.422 MB / 1.89 GB, free: 39 MB / 0.9324 GB Notification: Performance of collectInitialBindings (initialization): time 0.2623/5.206, allocations: 20.15 MB / 1.909 GB, free: 426.8 MB / 0.9324 GB Notification: Performance of simplifyInitialFunctions (initialization): time 0.0459/5.252, allocations: 6.517 MB / 1.916 GB, free: 426.5 MB / 0.9324 GB Notification: Performance of setup shared object (initialization): time 4.567e-05/5.252, allocations: 301.1 kB / 1.916 GB, free: 426.2 MB / 0.9324 GB Notification: Performance of preBalanceInitialSystem (initialization): time 0.05116/5.303, allocations: 24.58 MB / 1.94 GB, free: 425.7 MB / 0.9324 GB Notification: Performance of partitionIndependentBlocks (initialization): time 0.05721/5.361, allocations: 30.99 MB / 1.97 GB, free: 410.6 MB / 0.9324 GB Notification: It was not possible to check the given initialization system for consistency symbolically, because the relevant equations are part of an algebraic loop. This is not supported yet. Notification: Performance of analyzeInitialSystem (initialization): time 1.335/6.695, allocations: 0.601 GB / 2.571 GB, free: 315.7 MB / 0.9324 GB Notification: Performance of solveInitialSystemEqSystem (initialization): time 0.00019/6.695, allocations: 35.91 kB / 2.571 GB, free: 315.7 MB / 0.9324 GB Notification: Performance of matching and sorting (n=6519) (initialization): time 0.2081/6.904, allocations: 83.27 MB / 2.653 GB, free: 243.1 MB / 0.9324 GB Notification: Performance of prepare postOptimizeDAE: time 0.0001346/6.904, allocations: 109.5 kB / 2.653 GB, free: 243 MB / 0.9324 GB Notification: Performance of postOpt simplifyComplexFunction (initialization): time 0.0005101/6.904, allocations: 136 kB / 2.653 GB, free: 242.9 MB / 0.9324 GB Notification: Performance of postOpt tearingSystem (initialization): time 1.431/8.335, allocations: 0.8494 GB / 3.502 GB, free: 231.9 MB / 0.9324 GB Notification: Performance of postOpt solveSimpleEquations (initialization): time 0.005513/8.34, allocations: 1.692 MB / 3.504 GB, free: 230.7 MB / 0.9324 GB Notification: Performance of postOpt calculateStrongComponentJacobians (initialization): time 0.008673/8.349, allocations: 12.53 MB / 3.516 GB, free: 219.1 MB / 0.9324 GB Notification: Performance of postOpt simplifyAllExpressions (initialization): time 0.02671/8.376, allocations: 2.812 MB / 3.519 GB, free: 217.6 MB / 0.9324 GB Notification: Performance of postOpt collapseArrayExpressions (initialization): time 0.01114/8.387, allocations: 1.238 MB / 3.52 GB, free: 216.7 MB / 0.9324 GB Warning: Assuming fixed start value for the following 4 variables: TemperatureControl.pIsat.Integrateur1.x0:DISCRETE(fixed = true protected = true ) type: Real regulation_Level_Condenser.pIsat.Integrateur1.x0:DISCRETE(fixed = true protected = true ) type: Real regulation_Level_Condenser.pIsat1.Integrateur1.x0:DISCRETE(fixed = true protected = true ) type: Real Pump_VelocityControl.pIsat.Integrateur1.x0:DISCRETE(fixed = true protected = true ) type: Real Warning: The initial conditions are over specified. The following 30 initial equations are redundant, so they are removed from the initialization system: $DER.splitter_TurbineIP2.P = 0.0 $DER.splitter_Turbine_HP.P = 0.0 $DER.Boiler_walls.TwoPhaseFlowPipe.Q[1] = 0.0 $DER.RMT_RHT.TwoPhaseFlowPipe.Q[4] = 0.0 $DER.SBT.TwoPhaseFlowPipe.Q[1] = 0.0 $DER.RBT.TwoPhaseFlowPipe.Q[1] = 0.0 $DER.RBT.TwoPhaseFlowPipe.Q[4] = 0.0 $DER.Economiseur.TwoPhaseFlowPipe.Q[1] = 0.0 $DER.SMT_SHT.TwoPhaseFlowPipe.Q[3] = 0.0 $DER.SMT_SHT.TwoPhaseFlowPipe.Q[4] = 0.0 $DER.volumeA.P = 0.0 $DER.TemperatureControl.pIsat.Integrateur1.x = 0.0 $DER.volume_HP2.P = 0.0 $DER.volume_HP1Vap1.P = 0.0 $DER.volume_HP21.P = 0.0 $DER.volume_HP21.h = 0.0 $DER.pT1_2.x = 0.0 CheckValve.Q = $START.CheckValve.Q SMT_SHT.TwoPhaseFlowPipe.P[5] = $START.SMT_SHT.TwoPhaseFlowPipe.P[5] RMT_RHT.TwoPhaseFlowPipe.P[5] = $START.RMT_RHT.TwoPhaseFlowPipe.P[5] lumpedStraightPipe_HP_IP.Q = $START.lumpedStraightPipe_HP_IP.Q lumpedStraightPipe_LP3.Q = $START.lumpedStraightPipe_LP3.Q splitter_TurbineLP3.P = $START.splitter_TurbineLP3.P lumpedStraightPipe_LP2.Q = $START.lumpedStraightPipe_LP2.Q splitter_TurbineLP2.P = $START.splitter_TurbineLP2.P lumpedStraightPipe_LP1.Q = $START.lumpedStraightPipe_LP1.Q splitter_TurbineLP1.P = $START.splitter_TurbineLP1.P splitter_TurbineIP3.P = $START.splitter_TurbineIP3.P splitter_TurbineIP2.P = $START.splitter_TurbineIP2.P Turbine_HP.Pe = $START.Turbine_HP.Pe. Notification: Model statistics after passing the back-end for initialization: * Number of independent subsystems: 484 * Number of states: 0 () * Number of discrete variables: 348 ($PRE.TemperatureControl.pIsat.Integrateur1.x0,TemperatureControl.pIsat.Integrateur1.x0,$PRE.regulation_Level_Condenser.pIsat.Integrateur1.x0,regulation_Level_Condenser.pIsat.Integrateur1.x0,$PRE.regulation_Level_Condenser.pIsat1.Integrateur1.x0,regulation_Level_Condenser.pIsat1.Integrateur1.x0,$PRE.Pump_VelocityControl.pIsat.Integrateur1.x0,Pump_VelocityControl.pIsat.Integrateur1.x0,$PRE.CheckValve.touvert,$whenCondition2,$PRE.CheckValve.tferme,$whenCondition1,Pump_VelocityControl.pIsat.Integrateur1.reset.signal,regulation_Level_Condenser.pIsat.Integrateur1.reset.signal,TemperatureControl.pIsat.Integrateur1.reset.signal,CheckValve.tferme,CheckValve.touvert,CheckValve.ouvert,$PRE.CheckValve.ouvert,regulation_Level_Condenser.echelon.yL.signal,regulation_Level_Condenser.edge.yL.signal,regulation_Level_Condenser.edge.uL.signal,$PRE.regulation_Level_Condenser.edge.uL.signal,$whenCondition3,volume_HP22.Cs2.b,volume_HP22.Cs1.b,volume_HP22.Ce2.a,volume_HP22.Ce1.a,volume_HP21.Cs2.b,volume_HP21.Cs1.b,volume_HP21.Ce2.a,volume_HP21.Ce1.a,singularPressureLoss7.C2.b,singularPressureLoss7.C1.a,singularPressureLoss6.C2.b,singularPressureLoss6.C1.a,singularPressureLoss5.C2.b,singularPressureLoss5.C1.a,singularPressureLoss4.C2.b,singularPressureLoss4.C1.a,singularPressureLoss3.C2.b,singularPressureLoss3.C1.a,singularPressureLoss2.C2.b,singularPressureLoss2.C1.a,singularPressureLoss1.C2.b,singularPressureLoss1.C1.a,volume_HP1Vap1.Cs2.b,volume_HP1Vap1.Cs1.b,volume_HP1Vap1.Ce2.a,volume_HP1Vap1.Ce1.a,volume_HP1Vap.Cs2.b,volume_HP1Vap.Cs1.b,volume_HP1Vap.Ce2.a,volume_HP1Vap.Ce1.a,volume_HP3.Cs2.b,volume_HP3.Cs1.b,volume_HP3.Ce2.a,volume_HP3.Ce1.a,volume_HP2.Cs2.b,volume_HP2.Cs1.b,volume_HP2.Ce2.a,volume_HP2.Ce1.a,ReheaterHP2_1.Ev.a,ReheaterHP2_1.Sp.b,ReheaterHP2_1.Ep.a,ReheaterHP2_1.Se.b,ReheaterHP2_1.Ee.a,ReheaterHP1_1.Ev.a,ReheaterHP1_1.Sp.b,ReheaterHP1_1.Ep.a,ReheaterHP1_1.Se.b,ReheaterHP1_1.Ee.a,volume_HP1.Cs2.b,volume_HP1.Cs1.b,volume_HP1.Ce2.a,volume_HP1.Ce1.a,sensorQ.C2.b,sensorQ.C1.a,CheckValve.C2.b,CheckValve.C1.a,singularPressureLoss_Eco.C2.b,singularPressureLoss_Eco.C1.a,splitter_condenser.Cs2.b,splitter_condenser.Cs1.b,splitter_condenser.Ce2.a,splitter_condenser.Ce1.a,lumpedStraightPipe_HP2.C2.b,lumpedStraightPipe_HP2.C1.a,lumpedStraightPipe_Condenser1.C2.b,lumpedStraightPipe_Condenser1.C1.a,controlValve_Condenser.C2.b,controlValve_Condenser.C1.a,lumpedStraightPipe_Low.C2.b,lumpedStraightPipe_Low.C1.a,Sensor_Qvap_Cond2.C2.b,Sensor_Qvap_Cond2.C1.a,Sensor_Qvap_Cond.C2.b,Sensor_Qvap_Cond.C1.a,loopBreakerP_Cond.C2.b,loopBreakerP_Cond.C1.a,loopBreakerP_ReDrum.C2.b,loopBreakerP_ReDrum.C1.a,loopBreakerP_Drum_2.C2.b,loopBreakerP_Drum_2.C1.a,controlValveEco.C2.b,controlValveEco.C1.a,fuelSourcePQ.C.b,sourceQ.C.b,volumeA.Cs2.b,volumeA.Cs1.b,volumeA.Ce2.a,volumeA.Ce1.a,volumeA1.Cs2.b,volumeA1.Cs1.b,volumeA1.Ce2.a,volumeA1.Ce1.a,AirPreheater.Ce2.a,AirPreheater.Cs1.b,AirPreheater.Cs2.b,AirPreheater.Ce1.a,sourceAir.C.b,RA.Sf.b,RA.Ef.a,RA.Ec.a,RA.Sc.b,mixer2_1.Ce1.a,mixer2_1.Cs.b,mixer2_1.Ce2.a,singularPressureLoss.C2.b,singularPressureLoss.C1.a,SMT_SHT.TwoPhaseFlowPipe.C2.b,SMT_SHT.TwoPhaseFlowPipe.C1.a,SMT_SHT.ExchangerFlueGasesMetal.C2.b,SMT_SHT.ExchangerFlueGasesMetal.C1.a,Economiseur.TwoPhaseFlowPipe.C2.b,Economiseur.TwoPhaseFlowPipe.C1.a,Economiseur.ExchangerFlueGasesMetal.C2.b,Economiseur.ExchangerFlueGasesMetal.C1.a,singularPressureLoss_RBT.C2.b,singularPressureLoss_RBT.C1.a,RBT.TwoPhaseFlowPipe.C2.b,RBT.TwoPhaseFlowPipe.C1.a,RBT.ExchangerFlueGasesMetal.C2.b,RBT.ExchangerFlueGasesMetal.C1.a,singularPressureLoss_SBT.C2.b,singularPressureLoss_SBT.C1.a,SBT.TwoPhaseFlowPipe.C2.b,SBT.TwoPhaseFlowPipe.C1.a,SBT.ExchangerFlueGasesMetal.C2.b,SBT.ExchangerFlueGasesMetal.C1.a,RMT_RHT.TwoPhaseFlowPipe.C2.b,RMT_RHT.TwoPhaseFlowPipe.C1.a,RMT_RHT.ExchangerFlueGasesMetal.C2.b,RMT_RHT.ExchangerFlueGasesMetal.C1.a,puitsFumeesPTQXA1.C.a,Boiler_walls.TwoPhaseFlowPipe.C2.b,Boiler_walls.TwoPhaseFlowPipe.C1.a,Boiler_walls.ExchangerFlueGasesMetal.C2.b,Boiler_walls.ExchangerFlueGasesMetal.C1.a,splitter2_1.Cs2.b,splitter2_1.Cs1.b,splitter2_1.Ce.a,Wall_screen.C2.b,Wall_screen.C1.a,genericCombustion.Cws.a,genericCombustion.Cfg.b,genericCombustion.Ca.a,genericCombustion.Cfuel.a,controlValveIP.C2.b,controlValveIP.C1.a,controlValveHP.C2.b,controlValveHP.C1.a,sensorT.C2.b,sensorT.C1.a,splitter_Turbine_HP.Cs3.b,splitter_Turbine_HP.Cs2.b,splitter_Turbine_HP.Cs1.b,splitter_Turbine_HP.Ce.a,Turbine_HP1.Cs.b,Turbine_HP1.Ce.a,lumpedStraightPipe_HP_IP.C2.b,lumpedStraightPipe_HP_IP.C1.a,lumpedStraightPipe_HP.C2.b,lumpedStraightPipe_HP.C1.a,Desuperheater.Sc.b,Desuperheater.Sf.b,Desuperheater.Ef.a,Desuperheater.Ec.a,ReheaterHP1.Ev.a,ReheaterHP1.Sp.b,ReheaterHP1.Ep.a,ReheaterHP1.Se.b,ReheaterHP1.Ee.a,lumpedStraightPipe_HP1.C2.b,lumpedStraightPipe_HP1.C1.a,ReheaterHP2.Ev.a,ReheaterHP2.Sp.b,ReheaterHP2.Ep.a,ReheaterHP2.Se.b,ReheaterHP2.Ee.a,lumpedStraightPipe_Desu.C2.b,lumpedStraightPipe_Desu.C1.a,ReheaterHP3.Ev.a,ReheaterHP3.Sp.b,ReheaterHP3.Ep.a,ReheaterHP3.Se.b,ReheaterHP3.Ee.a,staticCentrifugalPump1.C2.b,staticCentrifugalPump1.C1.a,Drum_2.Cs3.b,Drum_2.Cs2.b,Drum_2.Cs1.b,Drum_2.Cs4.b,Drum_2.Ce1.a,Drum_2.Ce4.a,Drum_2.Ce3.a,Drum_2.Ce2.a,lumpedStraightPipe_IP1.C2.b,lumpedStraightPipe_IP1.C1.a,Drum_1.Cs3.b,Drum_1.Cs2.b,Drum_1.Cs1.b,Drum_1.Cs4.b,Drum_1.Ce1.a,Drum_1.Ce4.a,Drum_1.Ce3.a,Drum_1.Ce2.a,pipePressureLoss_LP3_Drum.C2.b,pipePressureLoss_LP3_Drum.C1.a,ReheaterIP.Ev.a,ReheaterIP.Sp.b,ReheaterIP.Ep.a,ReheaterIP.Se.b,ReheaterIP.Ee.a,ReheaterLP1.Ev.a,ReheaterLP1.Sp.b,ReheaterLP1.Ep.a,ReheaterLP1.Se.b,ReheaterLP1.Ee.a,ReheaterLP2.Ev.a,ReheaterLP2.Sp.b,ReheaterLP2.Ep.a,ReheaterLP2.Se.b,ReheaterLP2.Ee.a,ReheaterLP3.Ev.a,ReheaterLP3.Sp.b,ReheaterLP3.Ep.a,ReheaterLP3.Se.b,ReheaterLP3.Ee.a,ReDrum.Sc.b,ReDrum.Sf.b,ReDrum.Ef.a,ReDrum.Ec.a,staticCentrifugalPump.C2.b,staticCentrifugalPump.C1.a,Condenser.Cse.b,Condenser.Cee.a,Condenser.Cl.b,Condenser.Cv.a,lumpedStraightPipe_Condenser2.C2.b,lumpedStraightPipe_Condenser2.C1.a,SourceCaloporteur.C.b,PuitsCaloporteur.C.a,lumpedStraightPipe_LP3.C2.b,lumpedStraightPipe_LP3.C1.a,splitter_TurbineLP3.Cs2.b,splitter_TurbineLP3.Cs1.b,splitter_TurbineLP3.Ce2.a,splitter_TurbineLP3.Ce1.a,lumpedStraightPipe_LP2.C2.b,lumpedStraightPipe_LP2.C1.a,splitter_TurbineLP2.Cs2.b,splitter_TurbineLP2.Cs1.b,splitter_TurbineLP2.Ce2.a,splitter_TurbineLP2.Ce1.a,lumpedStraightPipe_LP1.C2.b,lumpedStraightPipe_LP1.C1.a,splitter_TurbineLP1.Cs2.b,splitter_TurbineLP1.Cs1.b,splitter_TurbineLP1.Ce2.a,splitter_TurbineLP1.Ce1.a,splitter_TurbineIP3.Cs2.b,splitter_TurbineIP3.Cs1.b,splitter_TurbineIP3.Ce2.a,splitter_TurbineIP3.Ce1.a,lumpedStraightPipe_IP3.C2.b,lumpedStraightPipe_IP3.C1.a,splitter_TurbineIP2.Cs2.b,splitter_TurbineIP2.Cs1.b,splitter_TurbineIP2.Ce2.a,splitter_TurbineIP2.Ce1.a,splitter_TurbineIP1.Cs2.b,splitter_TurbineIP1.Cs1.b,splitter_TurbineIP1.Ce2.a,splitter_TurbineIP1.Ce1.a,Echappement.Cs.b,Echappement.Ce.a,Turbine_LP3.Cs.b,Turbine_LP3.Ce.a,Turbine_IP3.Cs.b,Turbine_IP3.Ce.a,Turbine_LP1.Cs.b,Turbine_LP1.Ce.a,Turbine_IP1.Cs.b,Turbine_IP1.Ce.a,Turbine_LP2.Cs.b,Turbine_LP2.Ce.a,Turbine_IP2.Cs.b,Turbine_IP2.Ce.a,splitter_Turbine_HP1.Cs3.b,splitter_Turbine_HP1.Cs2.b,splitter_Turbine_HP1.Cs1.b,splitter_Turbine_HP1.Ce.a,Turbine_HP.Cs.b,Turbine_HP.Ce.a,volume_HP22.Cs2.a,volume_HP22.Ce2.b,volume_HP21.Cs2.a,volume_HP21.Ce2.b,volume_HP1Vap1.Ce2.b,volume_HP1Vap.Ce2.b,volume_HP3.Cs1.a,volume_HP2.Ce1.b,ReheaterHP1_1.Ep.b,volume_HP1.Cs1.a,splitter_condenser.Cs2.a,volumeA.Cs2.a,volumeA1.Ce2.b,AirPreheater.Cs2.a,AirPreheater.Ce2.b,splitter_Turbine_HP.Cs1.a,ReheaterHP1.Ep.b,Drum_2.Cs4.a,Drum_2.Cs3.a,Drum_2.Cs2.a,Drum_2.Ce3.b,Drum_1.Cs4.a,Drum_1.Cs3.a,Drum_1.Cs2.a,Drum_1.Ce4.b,Drum_1.Ce2.b,ReheaterIP.Ep.b,ReheaterLP3.Ep.b,splitter_TurbineLP3.Ce2.b,splitter_TurbineLP2.Ce2.b,splitter_TurbineLP1.Ce2.b,splitter_TurbineIP2.Ce2.b,splitter_TurbineIP1.Ce2.b) * Number of discrete states: 0 () * Number of clocked states: 0 () * Top-level inputs: 0 Notification: Strong component statistics for initialization (1049): * Single equations (assignments): 971 * Array equations: 0 * Algorithm blocks: 2 * Record equations: 62 * When equations: 0 * If-equations: 0 * Equation systems (not torn): 3 * Torn equation systems: 11 * Mixed (continuous/discrete) equation systems: 0 Notification: Equation system details (not torn): * Constant Jacobian (size): 0 systems * Linear Jacobian (size,density): 1 system {(2,100.0%)} * Non-linear Jacobian (size): 2 systems {1, 1} * Without analytic Jacobian (size): 0 systems Notification: Torn system details for strict tearing set: * Linear torn systems (#iteration vars, #inner vars, density): 2 systems {(4,1,62.5%), (1,1,100.0%)} * Non-linear torn systems (#iteration vars, #inner vars): 9 systems {(1,3), (1,4), (1,3), (1,3), (1,3), (294,1675), (1,1), (9,3), (1,1)} Notification: Performance of prepare postOptimizeDAE: time 0.03028/8.417, allocations: 5.552 MB / 3.526 GB, free: 214.3 MB / 0.9324 GB Notification: Performance of postOpt lateInlineFunction (simulation): time 0.01404/8.431, allocations: 2.283 MB / 3.528 GB, free: 213.4 MB / 0.9324 GB Notification: Performance of postOpt wrapFunctionCalls (simulation): time 0.2055/8.637, allocations: 102.1 MB / 3.627 GB, free: 137 MB / 0.9324 GB Notification: Performance of postOpt inlineArrayEqn (simulation): time 0.1773/8.814, allocations: 87.52 MB / 3.713 GB, free: 63.32 MB / 0.9324 GB Notification: Performance of postOpt constantLinearSystem (simulation): time 0.0001661/8.814, allocations: 15.94 kB / 3.713 GB, free: 63.31 MB / 0.9324 GB Notification: Performance of postOpt simplifysemiLinear (simulation): time 0.00116/8.815, allocations: 198.9 kB / 3.713 GB, free: 63.31 MB / 0.9324 GB Warning: The model contains alias variables with redundant start and/or conflicting nominal values. It is recommended to resolve the conflicts, because otherwise the system could be hard to solve. To print the conflicting alias sets and the chosen candidates please use -d=aliasConflicts. Notification: Performance of postOpt removeSimpleEquations (simulation): time 0.6078/9.423, allocations: 153.5 MB / 3.863 GB, free: 384.3 MB / 0.9324 GB Notification: Performance of postOpt simplifyComplexFunction (simulation): time 0.00118/9.424, allocations: 35.08 kB / 3.863 GB, free: 384.3 MB / 0.9324 GB Notification: Performance of postOpt solveSimpleEquations (simulation): time 0.03729/9.461, allocations: 8.662 MB / 3.872 GB, free: 383.9 MB / 0.9324 GB Notification: Performance of postOpt tearingSystem (simulation): time 0.1052/9.567, allocations: 66.91 MB / 3.937 GB, free: 336.3 MB / 0.9324 GB Notification: Performance of postOpt inputDerivativesUsed (simulation): time 0.01915/9.586, allocations: 1.149 MB / 3.938 GB, free: 335.4 MB / 0.9324 GB Notification: Performance of postOpt calculateStrongComponentJacobians (simulation): time 0.1298/9.716, allocations: 166.9 MB / 4.101 GB, free: 164.9 MB / 0.9324 GB Notification: Performance of postOpt calculateStateSetsJacobians (simulation): time 3.066e-06/9.716, allocations: 4 kB / 4.101 GB, free: 164.9 MB / 0.9324 GB Notification: Performance of postOpt symbolicJacobian (simulation): time 0.2463/9.962, allocations: 130.7 MB / 4.229 GB, free: 34.73 MB / 0.9324 GB Notification: Performance of postOpt removeConstants (simulation): time 0.02384/9.986, allocations: 7.266 MB / 4.236 GB, free: 27.7 MB / 0.9324 GB Notification: Performance of postOpt simplifyTimeIndepFuncCalls (simulation): time 0.01196/9.998, allocations: 0.7832 MB / 4.237 GB, free: 26.92 MB / 0.9324 GB Notification: Performance of postOpt simplifyAllExpressions (simulation): time 0.02688/10.02, allocations: 2.856 MB / 4.239 GB, free: 24.06 MB / 0.9324 GB Notification: Performance of postOpt findZeroCrossings (simulation): time 0.01371/10.04, allocations: 2.835 MB / 4.242 GB, free: 21.21 MB / 0.9324 GB Notification: Performance of postOpt collapseArrayExpressions (simulation): time 0.01209/10.05, allocations: 1.304 MB / 4.243 GB, free: 19.91 MB / 0.9324 GB Notification: Performance of sorting global known variables: time 0.005373/10.06, allocations: 4.195 MB / 4.247 GB, free: 15.76 MB / 0.9324 GB Notification: Performance of sort global known variables: time 1.9e-07/10.06, allocations: 0 / 4.247 GB, free: 15.76 MB / 0.9324 GB Notification: Performance of remove unused functions: time 0.04591/10.1, allocations: 11.23 MB / 4.258 GB, free: 4.59 MB / 0.9324 GB Notification: Model statistics after passing the back-end for simulation: * Number of independent subsystems: 8 * Number of states: 152 (splitter_Turbine_HP1.P,splitter_Turbine_HP1.h,splitter_TurbineIP1.h,splitter_TurbineIP2.P,splitter_TurbineIP2.h,splitter_TurbineIP3.h,splitter_TurbineLP1.h,splitter_TurbineLP2.h,splitter_TurbineLP3.h,Condenser.P,Condenser.hl,Condenser.hv,Condenser.Vv,Drum_1.h,Drum_2.h,splitter_Turbine_HP.P,splitter_Turbine_HP.h,Wall_screen.P[2],Wall_screen.P[3],Wall_screen.P[4],Wall_screen.P[5],Wall_screen.P[6],Wall_screen.P[7],Wall_screen.P[8],Wall_screen.Q[1],Wall_screen.Q[2],Wall_screen.Q[3],Wall_screen.Q[4],Wall_screen.Q[5],Wall_screen.Q[6],Wall_screen.Q[7],Wall_screen.h[2],Wall_screen.h[3],Wall_screen.h[4],Wall_screen.h[5],Wall_screen.h[6],Wall_screen.h[7],Wall_screen.h[8],heatExchangerWall.Tp[1],heatExchangerWall.Tp[2],heatExchangerWall.Tp[3],heatExchangerWall.Tp[4],heatExchangerWall.Tp[5],heatExchangerWall.Tp[6],heatExchangerWall.Tp[7],Boiler_walls.ExchangerWall.Tp[1],Boiler_walls.ExchangerWall.Tp[2],Boiler_walls.ExchangerWall.Tp[3],Boiler_walls.TwoPhaseFlowPipe.P[2],Boiler_walls.TwoPhaseFlowPipe.P[3],Boiler_walls.TwoPhaseFlowPipe.P[4],Boiler_walls.TwoPhaseFlowPipe.Q[1],Boiler_walls.TwoPhaseFlowPipe.Q[2],Boiler_walls.TwoPhaseFlowPipe.Q[3],Boiler_walls.TwoPhaseFlowPipe.h[2],Boiler_walls.TwoPhaseFlowPipe.h[3],Boiler_walls.TwoPhaseFlowPipe.h[4],RMT_RHT.ExchangerWall.Tp[1],RMT_RHT.ExchangerWall.Tp[2],RMT_RHT.ExchangerWall.Tp[3],RMT_RHT.TwoPhaseFlowPipe.P[2],RMT_RHT.TwoPhaseFlowPipe.P[3],RMT_RHT.TwoPhaseFlowPipe.P[4],RMT_RHT.TwoPhaseFlowPipe.Q[2],RMT_RHT.TwoPhaseFlowPipe.Q[3],RMT_RHT.TwoPhaseFlowPipe.Q[4],RMT_RHT.TwoPhaseFlowPipe.h[2],RMT_RHT.TwoPhaseFlowPipe.h[3],RMT_RHT.TwoPhaseFlowPipe.h[4],SBT.ExchangerWall.Tp[1],SBT.ExchangerWall.Tp[2],SBT.ExchangerWall.Tp[3],SBT.TwoPhaseFlowPipe.P[2],SBT.TwoPhaseFlowPipe.P[3],SBT.TwoPhaseFlowPipe.P[4],SBT.TwoPhaseFlowPipe.Q[1],SBT.TwoPhaseFlowPipe.Q[2],SBT.TwoPhaseFlowPipe.Q[3],SBT.TwoPhaseFlowPipe.Q[4],SBT.TwoPhaseFlowPipe.h[2],SBT.TwoPhaseFlowPipe.h[3],SBT.TwoPhaseFlowPipe.h[4],RBT.ExchangerWall.Tp[1],RBT.ExchangerWall.Tp[2],RBT.ExchangerWall.Tp[3],RBT.TwoPhaseFlowPipe.P[2],RBT.TwoPhaseFlowPipe.P[3],RBT.TwoPhaseFlowPipe.P[4],RBT.TwoPhaseFlowPipe.Q[1],RBT.TwoPhaseFlowPipe.Q[2],RBT.TwoPhaseFlowPipe.Q[3],RBT.TwoPhaseFlowPipe.Q[4],RBT.TwoPhaseFlowPipe.h[2],RBT.TwoPhaseFlowPipe.h[3],RBT.TwoPhaseFlowPipe.h[4],Economiseur.ExchangerWall.Tp[1],Economiseur.ExchangerWall.Tp[2],Economiseur.ExchangerWall.Tp[3],Economiseur.TwoPhaseFlowPipe.P[2],Economiseur.TwoPhaseFlowPipe.P[3],Economiseur.TwoPhaseFlowPipe.P[4],Economiseur.TwoPhaseFlowPipe.Q[1],Economiseur.TwoPhaseFlowPipe.Q[2],Economiseur.TwoPhaseFlowPipe.Q[3],Economiseur.TwoPhaseFlowPipe.Q[4],Economiseur.TwoPhaseFlowPipe.h[2],Economiseur.TwoPhaseFlowPipe.h[3],Economiseur.TwoPhaseFlowPipe.h[4],SMT_SHT.ExchangerWall.Tp[1],SMT_SHT.ExchangerWall.Tp[2],SMT_SHT.ExchangerWall.Tp[3],SMT_SHT.TwoPhaseFlowPipe.P[2],SMT_SHT.TwoPhaseFlowPipe.P[3],SMT_SHT.TwoPhaseFlowPipe.P[4],SMT_SHT.TwoPhaseFlowPipe.Q[1],SMT_SHT.TwoPhaseFlowPipe.Q[2],SMT_SHT.TwoPhaseFlowPipe.Q[3],SMT_SHT.TwoPhaseFlowPipe.Q[4],SMT_SHT.TwoPhaseFlowPipe.h[2],SMT_SHT.TwoPhaseFlowPipe.h[3],SMT_SHT.TwoPhaseFlowPipe.h[4],AirPreheater.Xh2o,volumeA1.h,volumeA.P,volumeA.h,TemperatureControl.pIsat.Integrateur1.x,TemperatureControl.pT1_1.x,regulation_Level_Condenser.pIsat.Integrateur1.x,regulation_Level_Condenser.pIsat1.Integrateur1.x,regulation_Level_Condenser.pT1_1.x,regulation_Level_Condenser.pT1_2.x,regulation_Level_Condenser.pT1_3.x,splitter_condenser.h,Pump_VelocityControl.pIsat.Integrateur1.x,Pump_VelocityControl.pT1_1.x,pT1_1.x,volume_HP1.P,volume_HP1.h,volume_HP2.P,volume_HP2.h,volume_HP3.h,volume_HP1Vap.P,volume_HP1Vap.h,volume_HP1Vap1.P,volume_HP1Vap1.h,volume_HP21.P,volume_HP21.h,volume_HP22.P,volume_HP22.h,pT1_3.x,pT1_4.x,pT1_5.x) * Number of discrete variables: 13 ($whenCondition3,$whenCondition2,$whenCondition1,TemperatureControl.pIsat.Integrateur1.x0,regulation_Level_Condenser.pIsat.Integrateur1.x0,regulation_Level_Condenser.pIsat1.Integrateur1.x0,regulation_Level_Condenser.edge.uL.signal,regulation_Level_Condenser.edge.yL.signal,regulation_Level_Condenser.echelon.yL.signal,CheckValve.ouvert,CheckValve.touvert,CheckValve.tferme,Pump_VelocityControl.pIsat.Integrateur1.x0) * Number of discrete states: 5 (CheckValve.touvert,CheckValve.tferme,regulation_Level_Condenser.echelon.yL.signal,regulation_Level_Condenser.edge.yL.signal,regulation_Level_Condenser.edge.uL.signal) * Number of clocked states: 0 () * Top-level inputs: 0 Notification: Strong component statistics for simulation (3203): * Single equations (assignments): 2917 * Array equations: 0 * Algorithm blocks: 2 * Record equations: 168 * When equations: 5 * If-equations: 0 * Equation systems (not torn): 10 * Torn equation systems: 101 * Mixed (continuous/discrete) equation systems: 0 Notification: Equation system details (not torn): * Constant Jacobian (size): 0 systems * Linear Jacobian (size,density): 10 systems {(2,100.0%), (2,100.0%), (2,100.0%), (2,100.0%), (2,100.0%), (2,100.0%), (2,100.0%), (2,100.0%), (2,100.0%), (2,100.0%)} * Non-linear Jacobian (size): 0 systems * Without analytic Jacobian (size): 0 systems Notification: Torn system details for strict tearing set: * Linear torn systems (#iteration vars, #inner vars, density): 42 systems {(4,1,62.5%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (2,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (2,1,100.0%)} * Non-linear torn systems (#iteration vars, #inner vars): 59 systems {(1,2), (1,2), (1,2), (1,2), (1,2), (1,2), (1,4), (1,2), (1,2), (1,2), (1,2), (1,3), (1,5), (1,3), (1,2), (1,2), (1,2), (1,2), (1,3), (1,1), (93,233), (1,6), (3,7), (1,2), (1,2), (1,3), (1,6), (1,6), (1,6), (1,6), (1,34), (1,6), (1,6), (1,6), (1,6), (1,6), (1,3), (1,6), (1,6), (1,6), (2,37), (1,6), (1,6), (1,6), (1,6), (1,6), (1,5), (1,3), (52,195), (23,52), (1,3), (1,26), (1,2), (1,2), (1,1), (1,5), (1,5), (1,3), (23,52)} Notification: Performance of Backend phase and start with SimCode phase: time 0.5381/10.64, allocations: 135.8 MB / 4.391 GB, free: 356.4 MB / 0.9324 GB Notification: Performance of simCode: created initialization part: time 0.1403/10.78, allocations: 113.8 MB / 4.502 GB, free: 254.6 MB / 0.9324 GB Notification: Performance of simCode: created event and clocks part: time 9.017e-06/10.78, allocations: 7.375 kB / 4.502 GB, free: 254.6 MB / 0.9324 GB Notification: Performance of simCode: created simulation system equations: time 0.07921/10.86, allocations: 48.69 MB / 4.55 GB, free: 208.6 MB / 0.9324 GB Notification: Performance of simCode: created of all other equations (e.g. parameter, nominal, assert, etc): time 0.05958/10.92, allocations: 13.89 MB / 4.563 GB, free: 195.9 MB / 0.9324 GB Notification: Performance of simCode: created linear, non-linear and system jacobian parts: time 1.435/12.35, allocations: 389 MB / 4.943 GB, free: 284.3 MB / 0.9325 GB Notification: Performance of simCode: some other stuff during SimCode phase: time 0.02431/12.38, allocations: 17.3 MB / 4.96 GB, free: 272.1 MB / 0.9325 GB Notification: Performance of simCode: alias equations: time 0.01876/12.4, allocations: 4.754 MB / 4.965 GB, free: 269.2 MB / 0.9325 GB Notification: Performance of simCode: all other stuff during SimCode phase: time 0.0222/12.42, allocations: 16.89 MB / 4.981 GB, free: 253.6 MB / 0.9325 GB Notification: Performance of SimCode: time 1.753e-06/12.42, allocations: 0 / 4.981 GB, free: 253.6 MB / 0.9325 GB Notification: Performance of buildModelFMU: Generate the FMI files: time 1.848/14.27, allocations: 1.281 GB / 6.262 GB, free: 107.4 MB / 0.9325 GB Error: Error building simulator. Build log: cmd: cd '431.fmutmp/sources/' && mkdir build_cmake_static && cd build_cmake_static && cmake -DCMAKE_BUILD_TYPE=Release -DCMAKE_C_COMPILER='clang' .. && cmake --build . --parallel -j1 --target install && cd .. && rm -rf build_cmake_static CMake Warning (deprecated) at CMakeLists.txt:1 (cmake_minimum_required): Compatibility with CMake < 3.10 will be removed from a future version of CMake. Update the VERSION argument value. Or, use the ... syntax to tell CMake that the project requires at least but has been updated to work with policies introduced by or earlier. This warning is for project developers. Use -Wno-author or -Wno-deprecated to suppress it. -- The C compiler identification is Clang 21.1.8 -- Detecting C compiler ABI info -- Detecting C compiler ABI info - done -- Check for working C compiler: /usr/bin/clang - skipped -- Detecting C compile features -- Detecting C compile features - done -- FMI2 include directory: /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/fmi -- Performing Test CMAKE_HAVE_LIBC_PTHREAD -- Performing Test CMAKE_HAVE_LIBC_PTHREAD - Success -- Found Threads: TRUE -- Building for FMI platform linux64 -- Install directory: /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/../binaries/linux64 -- CVODE_DIRECTORY: /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc -- SUNDIALS_CVODE_LIBRARY: /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/lib/x86_64-linux-gnu/omc/libsundials_cvode.so -- SUNDIALS_NVECSERIAL_LIBRARY: /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/lib/x86_64-linux-gnu/omc/libsundials_nvecserial.so -- CVODE: /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/lib/x86_64-linux-gnu/omc/libsundials_nvecserial.so /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/lib/x86_64-linux-gnu/omc/libsundials_cvode.so -- Not using FMI2_FUNCTION_PREFIX -- Installing dynamic dependencies from list: /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/lib/x86_64-linux-gnu/omc/libsundials_cvode.so;/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/lib/x86_64-linux-gnu/omc/libsundials_nvecserial.so CMake Warning (policy) at CMakeLists.txt:234 (install): Policy CMP0177 is not set: install() DESTINATION paths are normalized. Run \"cmake --help-policy CMP0177\" for policy details. Use the cmake_policy command to set the policy and suppress this warning. This warning is for project developers. Use -Wno-author or -Wno-policy to suppress it. CMake Warning (policy) at CMakeLists.txt:234 (install): Policy CMP0177 is not set: install() DESTINATION paths are normalized. Run \"cmake --help-policy CMP0177\" for policy details. Use the cmake_policy command to set the policy and suppress this warning. This warning is for project developers. Use -Wno-author or -Wno-policy to suppress it. CMake Warning (policy) at CMakeLists.txt:234 (install): Policy CMP0177 is not set: install() DESTINATION paths are normalized. Run \"cmake --help-policy CMP0177\" for policy details. Use the cmake_policy command to set the policy and suppress this warning. This warning is for project developers. Use -Wno-author or -Wno-policy to suppress it. -- Configuring done (0.1s) -- Generating done (0.0s) -- Build files have been written to: /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/build_cmake_static [ 0%] Building C object CMakeFiles/431.dir/external_solvers/F77_aloc.c.o [ 1%] Building C object CMakeFiles/431.dir/external_solvers/dgemm.c.o [ 2%] Building C object CMakeFiles/431.dir/external_solvers/dgemv.c.o [ 3%] Building C object CMakeFiles/431.dir/external_solvers/dger.c.o [ 4%] Building C object CMakeFiles/431.dir/external_solvers/dgesv.c.o [ 4%] Building C object CMakeFiles/431.dir/external_solvers/dgetf2.c.o [ 5%] Building C object CMakeFiles/431.dir/external_solvers/dgetrf.c.o [ 6%] Building C object CMakeFiles/431.dir/external_solvers/dgetri.c.o [ 7%] Building C object CMakeFiles/431.dir/external_solvers/dgetrs.c.o [ 8%] Building C object CMakeFiles/431.dir/external_solvers/dlamch.c.o [ 8%] Building C object CMakeFiles/431.dir/external_solvers/dlaswp.c.o [ 9%] Building C object CMakeFiles/431.dir/external_solvers/dogleg_.c.o [ 10%] Building C object CMakeFiles/431.dir/external_solvers/dpmpar_.c.o [ 11%] Building C object CMakeFiles/431.dir/external_solvers/dscal.c.o [ 12%] Building C object CMakeFiles/431.dir/external_solvers/dswap.c.o [ 12%] Building C object CMakeFiles/431.dir/external_solvers/dtrmm.c.o [ 13%] Building C object CMakeFiles/431.dir/external_solvers/dtrmv.c.o [ 14%] Building C object CMakeFiles/431.dir/external_solvers/dtrsm.c.o [ 15%] Building C object CMakeFiles/431.dir/external_solvers/dtrti2.c.o [ 16%] Building C object CMakeFiles/431.dir/external_solvers/dtrtri.c.o [ 16%] Building C object CMakeFiles/431.dir/external_solvers/enorm_.c.o [ 17%] Building C object CMakeFiles/431.dir/external_solvers/exit_.c.o [ 18%] Building C object CMakeFiles/431.dir/external_solvers/hybrj_.c.o [ 19%] Building C object CMakeFiles/431.dir/external_solvers/i_nint.c.o [ 20%] Building C object CMakeFiles/431.dir/external_solvers/idamax.c.o [ 20%] Building C object CMakeFiles/431.dir/external_solvers/ieeeck.c.o [ 21%] Building C object CMakeFiles/431.dir/external_solvers/ilaenv.c.o [ 22%] Building C object CMakeFiles/431.dir/external_solvers/iparmq.c.o [ 23%] Building C object CMakeFiles/431.dir/external_solvers/lsame.c.o [ 24%] Building C object CMakeFiles/431.dir/external_solvers/pow_di.c.o [ 24%] Building C object CMakeFiles/431.dir/external_solvers/qform_.c.o [ 25%] Building C object CMakeFiles/431.dir/external_solvers/qrfac_.c.o [ 26%] Building C object CMakeFiles/431.dir/external_solvers/r1mpyq_.c.o [ 27%] Building C object CMakeFiles/431.dir/external_solvers/r1updt_.c.o [ 28%] Building C object CMakeFiles/431.dir/external_solvers/s_cat.c.o [ 28%] Building C object CMakeFiles/431.dir/external_solvers/s_cmp.c.o [ 29%] Building C object CMakeFiles/431.dir/external_solvers/s_copy.c.o [ 30%] Building C object CMakeFiles/431.dir/external_solvers/xerbla.c.o [ 31%] Building C object CMakeFiles/431.dir/fmi-export/fmu2_model_interface.c.o [ 32%] Building C object CMakeFiles/431.dir/fmi-export/fmu_read_flags.c.o [ 32%] Building C object CMakeFiles/431.dir/gc/memory_pool.c.o [ 33%] Building C object CMakeFiles/431.dir/gc/omc_gc.c.o [ 34%] Building C object CMakeFiles/431.dir/math-support/pivot.c.o [ 35%] Building C object CMakeFiles/431.dir/meta/meta_modelica_catch.c.o [ 36%] Building C object CMakeFiles/431.dir/simulation/arrayIndex.c.o [ 36%] Building C object CMakeFiles/431.dir/simulation/jacobian_util.c.o [ 37%] Building C object CMakeFiles/431.dir/simulation/omc_simulation_util.c.o [ 38%] Building C object CMakeFiles/431.dir/simulation/options.c.o [ 39%] Building C object CMakeFiles/431.dir/simulation/simulation_info_json.c.o [ 40%] Building C object CMakeFiles/431.dir/simulation/simulation_omc_assert.c.o [ 40%] Building C object CMakeFiles/431.dir/simulation/solver/cvode_solver.c.o [ 41%] Building C object CMakeFiles/431.dir/simulation/solver/delay.c.o [ 42%] Building C object CMakeFiles/431.dir/simulation/solver/fmi_events.c.o [ 43%] Building C object CMakeFiles/431.dir/simulation/solver/initialization/initialization.c.o [ 44%] Building C object CMakeFiles/431.dir/simulation/solver/linearSolverLapack.c.o [ 44%] Building C object CMakeFiles/431.dir/simulation/solver/linearSolverTotalPivot.c.o [ 45%] Building C object CMakeFiles/431.dir/simulation/solver/linearSystem.c.o [ 46%] Building C object CMakeFiles/431.dir/simulation/solver/model_help.c.o [ 47%] Building C object CMakeFiles/431.dir/simulation/solver/nonlinearSolverHomotopy.c.o [ 48%] Building C object CMakeFiles/431.dir/simulation/solver/nonlinearSolverHybrd.c.o [ 48%] Building C object CMakeFiles/431.dir/simulation/solver/nonlinearSystem.c.o [ 49%] Building C object CMakeFiles/431.dir/simulation/solver/nonlinearValuesList.c.o [ 50%] Building C object CMakeFiles/431.dir/simulation/solver/omc_math.c.o [ 51%] Building C object CMakeFiles/431.dir/simulation/solver/spatialDistribution.c.o [ 52%] Building C object CMakeFiles/431.dir/simulation/solver/stateset.c.o [ 52%] Building C object CMakeFiles/431.dir/simulation/solver/sundials_error.c.o [ 53%] Building C object CMakeFiles/431.dir/simulation/solver/synchronous.c.o [ 54%] Building C object CMakeFiles/431.dir/util/ModelicaUtilities.c.o [ 55%] Building C object CMakeFiles/431.dir/util/base_array.c.o [ 56%] Building C object CMakeFiles/431.dir/util/boolean_array.c.o [ 56%] Building C object CMakeFiles/431.dir/util/context.c.o [ 57%] Building C object CMakeFiles/431.dir/util/division.c.o [ 58%] Building C object CMakeFiles/431.dir/util/doubleEndedList.c.o [ 59%] Building C object CMakeFiles/431.dir/util/generic_array.c.o [ 60%] Building C object CMakeFiles/431.dir/util/index_spec.c.o [ 60%] Building C object CMakeFiles/431.dir/util/integer_array.c.o [ 61%] Building C object CMakeFiles/431.dir/util/list.c.o [ 62%] Building C object CMakeFiles/431.dir/util/modelica_string.c.o [ 63%] Building C object CMakeFiles/431.dir/util/modelica_string_lit.c.o [ 64%] Building C object CMakeFiles/431.dir/util/omc_error.c.o [ 64%] Building C object CMakeFiles/431.dir/util/omc_file.c.o [ 65%] Building C object CMakeFiles/431.dir/util/omc_init.c.o [ 66%] Building C object CMakeFiles/431.dir/util/omc_mmap.c.o [ 67%] Building C object CMakeFiles/431.dir/util/omc_msvc.c.o [ 68%] Building C object CMakeFiles/431.dir/util/omc_numbers.c.o [ 68%] Building C object CMakeFiles/431.dir/util/parallel_helper.c.o [ 69%] Building C object CMakeFiles/431.dir/util/rational.c.o [ 70%] Building C object CMakeFiles/431.dir/util/real_array.c.o [ 71%] Building C object CMakeFiles/431.dir/util/ringbuffer.c.o [ 72%] Building C object CMakeFiles/431.dir/util/simulation_options.c.o [ 72%] Building C object CMakeFiles/431.dir/util/string_array.c.o [ 73%] Building C object CMakeFiles/431.dir/util/utility.c.o [ 74%] Building C object CMakeFiles/431.dir/util/varinfo.c.o [ 75%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant.c.o [ 76%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_01exo.c.o [ 76%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_02nls.c.o [ 77%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_02nls_part0.c.o [ 78%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_02nls_part1.c.o [ 79%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_03lsy.c.o [ 80%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_04set.c.o [ 80%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_05evt.c.o [ 81%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_06inz.c.o [ 82%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_06inz_part2.c.o [ 83%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_06inz_part3.c.o [ 84%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_06inz_part4.c.o [ 84%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_07dly.c.o [ 85%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_08bnd.c.o [ 86%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_08bnd_part5.c.o [ 87%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_08bnd_part6.c.o [ 88%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_08bnd_part7.c.o [ 88%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_09alg.c.o [ 89%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_10asr.c.o [ 90%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_11mix.c.o [ 91%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_12jac.c.o [ 92%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_13opt.c.o [ 92%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_14lnz.c.o [ 93%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_15syn.c.o [ 94%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_16dae.c.o [ 95%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_17inl.c.o [ 96%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_18spd.c.o [ 96%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_FMU.c.o [ 97%] Building C object CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c.o /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:237:331: error: invalid operands to binary expression ('modelica_real' (aka 'double') and 'real_array' (aka 'struct base_array_s')) 237 | __omcQ_24ThermoSysPro_24PProperties_24PFlueGases_24PFlueGases_5Fh_24funDERh = (__omcQ_24ThermoSysPro_24PProperties_24PFlueGases_24PFlueGases_5Fh_24funDERstate._T) * (omc__omcQ_24DER_24ThermoSysPro_24PProperties_24PModelicaMediaFlueGases_24Ph_5F_5FTX(threadData, _state._T, _state._X, 1 /* true */, 1, 0.0, 1.0, _OMC_LIT8, 0.0)) + mul_alloc_real_array_scalar(__omcQ_24ThermoSysPro_24PProperties_24PFlueGases_24PFlueGases_5Fh_24funDERstate._X, omc__omcQ_24DER_24ThermoSysPro_24PProperties_24PModelicaMediaFlueGases_24Ph_5F_5FTX(threadData, _state._T, _state._X, 1 /* true */, 1, 0.0, 0.0, _OMC_LIT9, 0.0)) + (__omcQ_24ThermoSysPro_24PProperties_24PFlueGases_24PFlueGases_5Fh_24funDERXh2o) * (_Hlat) - (mul_alloc_real_array_scalar(__omcQ_24ThermoSysPro_24PProperties_24PFlueGases_24PFlueGases_5Fh_24funDERstate0._X, omc__omcQ_24DER_24ThermoSysPro_24PProperties_24PModelicaMediaFlueGases_24Ph_5F_5FTX(threadData, _state0._T, _state0._X, 1 /* true */, 1, 0.0, 0.0, _OMC_LIT9, 0.0))) - ((__omcQ_24ThermoSysPro_24PProperties_24PFlueGases_24PFlueGases_5Fh_24funDERstate0._T) * (omc__omcQ_24DER_24ThermoSysPro_24PProperties_24PModelicaMediaFlueGases_24Ph_5F_5FTX(threadData, _state0._T, _state0._X, 1 /* true */, 1, 0.0, 1.0, _OMC_LIT8, 0.0))); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1100:31: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 1100 | if((_option_interpolation == ((modelica_integer) 1))) | ~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1100:31: note: remove extraneous parentheses around the comparison to silence this warning 1100 | if((_option_interpolation == ((modelica_integer) 1))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1100:31: note: use '=' to turn this equality comparison into an assignment 1100 | if((_option_interpolation == ((modelica_integer) 1))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1106:33: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 1106 | if((_option_interpolation == ((modelica_integer) 2))) | ~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1106:33: note: remove extraneous parentheses around the comparison to silence this warning 1106 | if((_option_interpolation == ((modelica_integer) 2))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1106:33: note: use '=' to turn this equality comparison into an assignment 1106 | if((_option_interpolation == ((modelica_integer) 2))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1315:29: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 1315 | if((_option_interpolation == ((modelica_integer) 1))) | ~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1315:29: note: remove extraneous parentheses around the comparison to silence this warning 1315 | if((_option_interpolation == ((modelica_integer) 1))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1315:29: note: use '=' to turn this equality comparison into an assignment 1315 | if((_option_interpolation == ((modelica_integer) 1))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1321:31: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 1321 | if((_option_interpolation == ((modelica_integer) 2))) | ~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1321:31: note: remove extraneous parentheses around the comparison to silence this warning 1321 | if((_option_interpolation == ((modelica_integer) 2))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1321:31: note: use '=' to turn this equality comparison into an assignment 1321 | if((_option_interpolation == ((modelica_integer) 2))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1527:31: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 1527 | if((_option_interpolation == ((modelica_integer) 1))) | ~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1527:31: note: remove extraneous parentheses around the comparison to silence this warning 1527 | if((_option_interpolation == ((modelica_integer) 1))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1527:31: note: use '=' to turn this equality comparison into an assignment 1527 | if((_option_interpolation == ((modelica_integer) 1))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1533:33: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 1533 | if((_option_interpolation == ((modelica_integer) 2))) | ~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1533:33: note: remove extraneous parentheses around the comparison to silence this warning 1533 | if((_option_interpolation == ((modelica_integer) 2))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1533:33: note: use '=' to turn this equality comparison into an assignment 1533 | if((_option_interpolation == ((modelica_integer) 2))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1553:31: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 1553 | if((_option_interpolation == ((modelica_integer) 1))) | ~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1553:31: note: remove extraneous parentheses around the comparison to silence this warning 1553 | if((_option_interpolation == ((modelica_integer) 1))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1553:31: note: use '=' to turn this equality comparison into an assignment 1553 | if((_option_interpolation == ((modelica_integer) 1))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1559:33: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 1559 | if((_option_interpolation == ((modelica_integer) 2))) | ~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1559:33: note: remove extraneous parentheses around the comparison to silence this warning 1559 | if((_option_interpolation == ((modelica_integer) 2))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1559:33: note: use '=' to turn this equality comparison into an assignment 1559 | if((_option_interpolation == ((modelica_integer) 2))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1740:15: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 1740 | if((_IndX == _dimX)) | ~~~~~~^~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1740:15: note: remove extraneous parentheses around the comparison to silence this warning 1740 | if((_IndX == _dimX)) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1740:15: note: use '=' to turn this equality comparison into an assignment 1740 | if((_IndX == _dimX)) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1751:15: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 1751 | if((_IndX == ((modelica_integer) 2))) | ~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1751:15: note: remove extraneous parentheses around the comparison to silence this warning 1751 | if((_IndX == ((modelica_integer) 2))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:1751:15: note: use '=' to turn this equality comparison into an assignment 1751 | if((_IndX == ((modelica_integer) 2))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3318:14: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 3318 | if((_fluid == ((modelica_integer) 1))) | ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3318:14: note: remove extraneous parentheses around the comparison to silence this warning 3318 | if((_fluid == ((modelica_integer) 1))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3318:14: note: use '=' to turn this equality comparison into an assignment 3318 | if((_fluid == ((modelica_integer) 1))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3325:16: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 3325 | if((_fluid == ((modelica_integer) 2))) | ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3325:16: note: remove extraneous parentheses around the comparison to silence this warning 3325 | if((_fluid == ((modelica_integer) 2))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3325:16: note: use '=' to turn this equality comparison into an assignment 3325 | if((_fluid == ((modelica_integer) 2))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3332:18: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 3332 | if((_fluid == ((modelica_integer) 7))) | ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3332:18: note: remove extraneous parentheses around the comparison to silence this warning 3332 | if((_fluid == ((modelica_integer) 7))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3332:18: note: use '=' to turn this equality comparison into an assignment 3332 | if((_fluid == ((modelica_integer) 7))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3401:14: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 3401 | if((_fluid == ((modelica_integer) 1))) | ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3401:14: note: remove extraneous parentheses around the comparison to silence this warning 3401 | if((_fluid == ((modelica_integer) 1))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3401:14: note: use '=' to turn this equality comparison into an assignment 3401 | if((_fluid == ((modelica_integer) 1))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3408:16: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 3408 | if((_fluid == ((modelica_integer) 2))) | ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3408:16: note: remove extraneous parentheses around the comparison to silence this warning 3408 | if((_fluid == ((modelica_integer) 2))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3408:16: note: use '=' to turn this equality comparison into an assignment 3408 | if((_fluid == ((modelica_integer) 2))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3415:18: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 3415 | if((_fluid == ((modelica_integer) 7))) | ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3415:18: note: remove extraneous parentheses around the comparison to silence this warning 3415 | if((_fluid == ((modelica_integer) 7))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:3415:18: note: use '=' to turn this equality comparison into an assignment 3415 | if((_fluid == ((modelica_integer) 7))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:35864:16: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 35864 | if((_phase == ((modelica_integer) 2))) | ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:35864:16: note: remove extraneous parentheses around the comparison to silence this warning 35864 | if((_phase == ((modelica_integer) 2))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:35864:16: note: use '=' to turn this equality comparison into an assignment 35864 | if((_phase == ((modelica_integer) 2))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:35882:24: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 35882 | if((_phase == ((modelica_integer) 1))) | ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:35882:24: note: remove extraneous parentheses around the comparison to silence this warning 35882 | if((_phase == ((modelica_integer) 1))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:35882:24: note: use '=' to turn this equality comparison into an assignment 35882 | if((_phase == ((modelica_integer) 1))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:35913:26: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 35913 | if((_phase == ((modelica_integer) 1))) | ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:35913:26: note: remove extraneous parentheses around the comparison to silence this warning 35913 | if((_phase == ((modelica_integer) 1))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:35913:26: note: use '=' to turn this equality comparison into an assignment 35913 | if((_phase == ((modelica_integer) 1))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39375:15: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 39375 | if((_region == ((modelica_integer) 1))) | ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39375:15: note: remove extraneous parentheses around the comparison to silence this warning 39375 | if((_region == ((modelica_integer) 1))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39375:15: note: use '=' to turn this equality comparison into an assignment 39375 | if((_region == ((modelica_integer) 1))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39387:17: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 39387 | if((_region == ((modelica_integer) 2))) | ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39387:17: note: remove extraneous parentheses around the comparison to silence this warning 39387 | if((_region == ((modelica_integer) 2))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39387:17: note: use '=' to turn this equality comparison into an assignment 39387 | if((_region == ((modelica_integer) 2))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39399:19: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 39399 | if((_region == ((modelica_integer) 3))) | ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39399:19: note: remove extraneous parentheses around the comparison to silence this warning 39399 | if((_region == ((modelica_integer) 3))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39399:19: note: use '=' to turn this equality comparison into an assignment 39399 | if((_region == ((modelica_integer) 3))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39413:21: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 39413 | if((_region == ((modelica_integer) 5))) | ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39413:21: note: remove extraneous parentheses around the comparison to silence this warning 39413 | if((_region == ((modelica_integer) 5))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39413:21: note: use '=' to turn this equality comparison into an assignment 39413 | if((_region == ((modelica_integer) 5))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39517:15: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 39517 | if((_region == ((modelica_integer) 1))) | ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39517:15: note: remove extraneous parentheses around the comparison to silence this warning 39517 | if((_region == ((modelica_integer) 1))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39517:15: note: use '=' to turn this equality comparison into an assignment 39517 | if((_region == ((modelica_integer) 1))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39531:17: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 39531 | if((_region == ((modelica_integer) 2))) | ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39531:17: note: remove extraneous parentheses around the comparison to silence this warning 39531 | if((_region == ((modelica_integer) 2))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39531:17: note: use '=' to turn this equality comparison into an assignment 39531 | if((_region == ((modelica_integer) 2))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39545:19: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 39545 | if((_region == ((modelica_integer) 3))) | ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39545:19: note: remove extraneous parentheses around the comparison to silence this warning 39545 | if((_region == ((modelica_integer) 3))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39545:19: note: use '=' to turn this equality comparison into an assignment 39545 | if((_region == ((modelica_integer) 3))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39566:21: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 39566 | if((_region == ((modelica_integer) 4))) | ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39566:21: note: remove extraneous parentheses around the comparison to silence this warning 39566 | if((_region == ((modelica_integer) 4))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39566:21: note: use '=' to turn this equality comparison into an assignment 39566 | if((_region == ((modelica_integer) 4))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39573:23: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 39573 | if((_region == ((modelica_integer) 5))) | ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39573:23: note: remove extraneous parentheses around the comparison to silence this warning 39573 | if((_region == ((modelica_integer) 5))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39573:23: note: use '=' to turn this equality comparison into an assignment 39573 | if((_region == ((modelica_integer) 5))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39680:15: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 39680 | if((_region == ((modelica_integer) 1))) | ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39680:15: note: remove extraneous parentheses around the comparison to silence this warning 39680 | if((_region == ((modelica_integer) 1))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39680:15: note: use '=' to turn this equality comparison into an assignment 39680 | if((_region == ((modelica_integer) 1))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39694:17: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 39694 | if((_region == ((modelica_integer) 2))) | ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39694:17: note: remove extraneous parentheses around the comparison to silence this warning 39694 | if((_region == ((modelica_integer) 2))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39694:17: note: use '=' to turn this equality comparison into an assignment 39694 | if((_region == ((modelica_integer) 2))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39708:19: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 39708 | if((_region == ((modelica_integer) 3))) | ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39708:19: note: remove extraneous parentheses around the comparison to silence this warning 39708 | if((_region == ((modelica_integer) 3))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39708:19: note: use '=' to turn this equality comparison into an assignment 39708 | if((_region == ((modelica_integer) 3))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39722:21: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 39722 | if((_region == ((modelica_integer) 4))) | ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39722:21: note: remove extraneous parentheses around the comparison to silence this warning 39722 | if((_region == ((modelica_integer) 4))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39722:21: note: use '=' to turn this equality comparison into an assignment 39722 | if((_region == ((modelica_integer) 4))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39729:23: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 39729 | if((_region == ((modelica_integer) 5))) | ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39729:23: note: remove extraneous parentheses around the comparison to silence this warning 39729 | if((_region == ((modelica_integer) 5))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39729:23: note: use '=' to turn this equality comparison into an assignment 39729 | if((_region == ((modelica_integer) 5))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39898:15: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 39898 | if((_region == ((modelica_integer) 1))) | ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39898:15: note: remove extraneous parentheses around the comparison to silence this warning 39898 | if((_region == ((modelica_integer) 1))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39898:15: note: use '=' to turn this equality comparison into an assignment 39898 | if((_region == ((modelica_integer) 1))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39910:17: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 39910 | if((_region == ((modelica_integer) 2))) | ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39910:17: note: remove extraneous parentheses around the comparison to silence this warning 39910 | if((_region == ((modelica_integer) 2))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39910:17: note: use '=' to turn this equality comparison into an assignment 39910 | if((_region == ((modelica_integer) 2))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39922:19: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 39922 | if((_region == ((modelica_integer) 3))) | ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39922:19: note: remove extraneous parentheses around the comparison to silence this warning 39922 | if((_region == ((modelica_integer) 3))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39922:19: note: use '=' to turn this equality comparison into an assignment 39922 | if((_region == ((modelica_integer) 3))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39936:21: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 39936 | if((_region == ((modelica_integer) 5))) | ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39936:21: note: remove extraneous parentheses around the comparison to silence this warning 39936 | if((_region == ((modelica_integer) 5))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:39936:21: note: use '=' to turn this equality comparison into an assignment 39936 | if((_region == ((modelica_integer) 5))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:40678:18: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 40678 | if((_phase == ((modelica_integer) 2))) | ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:40678:18: note: remove extraneous parentheses around the comparison to silence this warning 40678 | if((_phase == ((modelica_integer) 2))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:40678:18: note: use '=' to turn this equality comparison into an assignment 40678 | if((_phase == ((modelica_integer) 2))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:40757:18: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 40757 | if((_phase == ((modelica_integer) 2))) | ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:40757:18: note: remove extraneous parentheses around the comparison to silence this warning 40757 | if((_phase == ((modelica_integer) 2))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:40757:18: note: use '=' to turn this equality comparison into an assignment 40757 | if((_phase == ((modelica_integer) 2))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42202:15: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 42202 | if((_region == ((modelica_integer) 1))) | ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42202:15: note: remove extraneous parentheses around the comparison to silence this warning 42202 | if((_region == ((modelica_integer) 1))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42202:15: note: use '=' to turn this equality comparison into an assignment 42202 | if((_region == ((modelica_integer) 1))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42209:17: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 42209 | if((_region == ((modelica_integer) 2))) | ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42209:17: note: remove extraneous parentheses around the comparison to silence this warning 42209 | if((_region == ((modelica_integer) 2))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42209:17: note: use '=' to turn this equality comparison into an assignment 42209 | if((_region == ((modelica_integer) 2))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42216:19: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 42216 | if((_region == ((modelica_integer) 4))) | ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42216:19: note: remove extraneous parentheses around the comparison to silence this warning 42216 | if((_region == ((modelica_integer) 4))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42216:19: note: use '=' to turn this equality comparison into an assignment 42216 | if((_region == ((modelica_integer) 4))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42293:15: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 42293 | if((_region == ((modelica_integer) 1))) | ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42293:15: note: remove extraneous parentheses around the comparison to silence this warning 42293 | if((_region == ((modelica_integer) 1))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42293:15: note: use '=' to turn this equality comparison into an assignment 42293 | if((_region == ((modelica_integer) 1))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42300:17: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 42300 | if((_region == ((modelica_integer) 2))) | ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42300:17: note: remove extraneous parentheses around the comparison to silence this warning 42300 | if((_region == ((modelica_integer) 2))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42300:17: note: use '=' to turn this equality comparison into an assignment 42300 | if((_region == ((modelica_integer) 2))) | ^~ | = /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42307:19: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] 42307 | if((_region == ((modelica_integer) 4))) | ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42307:19: note: remove extraneous parentheses around the comparison to silence this warning 42307 | if((_region == ((modelica_integer) 4))) | ~ ^ ~ /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/ThermoSysPro_ThermoSysPro.Fluid.Examples.Book.PowerPlants.SupercriticalPulverizedCoalPowerPlant/431.fmutmp/sources/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c:42307:19: note: use '=' to turn this equality comparison into an assignment 42307 | if((_region == ((modelica_integer) 4))) | ^~ | = 45 warnings and 1 error generated. gmake[2]: *** [CMakeFiles/431.dir/build.make:1773: CMakeFiles/431.dir/ThermoSysPro_ThermoSysPro_Fluid_Examples_Book_PowerPlants_SupercriticalPulverizedCoalPowerPlant_functions.c.o] Error 1 gmake[1]: *** [CMakeFiles/Makefile2:88: CMakeFiles/431.dir/all] Error 2 gmake: *** [Makefile:136: all] Error 2 " [Timeout remaining time 603] [Calling sys.exit(0), Time elapsed: 58.58279226440936]