(cd run_OMSimulator-cs-cvode && /home/hudson/saved_omc/OMSimulator/install/bin/OMSimulator --resultFile=../Buildings_latest_Buildings.Examples.VAVReheat.Validation.TraceSubstance_OMSimulator-cs-cvode_res.mat --stripRoot --tempDir=temp_Buildings_latest_Buildings_Examples_VAVReheat_Validation_TraceSubstance_OMSimulator-cs-cvode_fmu --startTime=4.4928e+06 --stopTime=4.6656e+06 --stepSize=900 --mode=cs --timeout=240 --tolerance=1e-06 ../Buildings_latest_Buildings_Examples_VAVReheat_Validation_TraceSubstance_OMSimulator-cs-cvode.fmu) LOG_SOLVER | info | CVODE linear multistep method CV_BDF LOG_SOLVER | info | CVODE maximum integration order CV_ITER_NEWTON LOG_SOLVER | info | CVODE use equidistant time grid YES LOG_SOLVER | info | CVODE Using relative error tolerance 1.000000e-06 LOG_SOLVER | info | CVODE Using dense internal linear solver SUNLinSol_Dense. LOG_SOLVER | info | CVODE Use internal dense numeric jacobian method. LOG_SOLVER | info | CVODE uses internal root finding method NO LOG_SOLVER | info | CVODE maximum absolut step size 0 LOG_SOLVER | info | CVODE initial step size is set automatically LOG_SOLVER | info | CVODE maximum integration order 5 LOG_SOLVER | info | CVODE maximum number of nonlinear convergence failures permitted during one step 10 LOG_SOLVER | info | CVODE BDF stability limit detection algorithm OFF info: *** FMU Simulation Info *** - model : Buildings.Examples.VAVReheat.Validation.TraceSubstance (co-simulation) - fmiVersion: 2.0 - startTime : 4492800.000000 - stopTime : 4665600.000000 - tolerance : 1e-06 - stepSize : 900 info: Result file: ../Buildings_latest_Buildings.Examples.VAVReheat.Validation.TraceSubstance_OMSimulator-cs-cvode_res.mat (bufferSize=10) info: Variable TraceSubstance.flo.cor.air.datConBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.cor.air.datConExt[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.cor.air.datConExtWin[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.cor.air.datConPar[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.cor.air.datConPar[2].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.cor.air.surBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.cor.air.surBou[2].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.cor.air.surBou[3].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.cor.air.surBou[4].name will not be stored in the result file, because the signal type is not supported info: Parameter TraceSubstance.flo.cor.datConBou[1].name will not be stored in the result file, because the signal type is not supported info: Parameter TraceSubstance.flo.cor.datConExt[1].name will not be stored in the result file, because the signal type is not supported info: Parameter TraceSubstance.flo.cor.datConExtWin[1].name will not be stored in the result file, because the signal type is not supported info: Parameter TraceSubstance.flo.cor.datConPar[1].name will not be stored in the result file, because the signal type is not supported info: Parameter TraceSubstance.flo.cor.datConPar[2].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.cor.irRadExc.datConBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.cor.irRadExc.datConExt[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.cor.irRadExc.datConExtWin[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.cor.irRadExc.datConPar[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.cor.irRadExc.datConPar[2].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.cor.irRadExc.surBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.cor.irRadExc.surBou[2].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.cor.irRadExc.surBou[3].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.cor.irRadExc.surBou[4].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.cor.irRadGai.datConBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.cor.irRadGai.datConExt[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.cor.irRadGai.datConExtWin[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.cor.irRadGai.datConPar[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.cor.irRadGai.datConPar[2].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.cor.irRadGai.surBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.cor.irRadGai.surBou[2].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.cor.irRadGai.surBou[3].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.cor.irRadGai.surBou[4].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.cor.radTem.datConBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.cor.radTem.datConExt[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.cor.radTem.datConExtWin[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.cor.radTem.datConPar[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.cor.radTem.datConPar[2].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.cor.radTem.surBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.cor.radTem.surBou[2].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.cor.radTem.surBou[3].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.cor.radTem.surBou[4].name will not be stored in the result file, because the signal type is not supported info: Parameter TraceSubstance.flo.cor.surBou[1].name will not be stored in the result file, because the signal type is not supported info: Parameter TraceSubstance.flo.cor.surBou[2].name will not be stored in the result file, because the signal type is not supported info: Parameter TraceSubstance.flo.cor.surBou[3].name will not be stored in the result file, because the signal type is not supported info: Parameter TraceSubstance.flo.cor.surBou[4].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.eas.air.datConBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.eas.air.datConExt[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.eas.air.datConExtWin[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.eas.air.datConPar[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.eas.air.datConPar[2].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.eas.air.surBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.eas.air.surBou[2].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.eas.bouConExtWin.conPar[1].name will not be stored in the result file, because the signal type is not supported info: Parameter TraceSubstance.flo.eas.datConBou[1].name will not be stored in the result file, because the signal type is not supported info: Parameter TraceSubstance.flo.eas.datConExt[1].name will not be stored in the result file, because the signal type is not supported info: Parameter TraceSubstance.flo.eas.datConExtWin[1].name will not be stored in the result file, because the signal type is not supported info: Parameter TraceSubstance.flo.eas.datConPar[1].name will not be stored in the result file, because the signal type is not supported info: Parameter TraceSubstance.flo.eas.datConPar[2].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.eas.irRadExc.datConBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.eas.irRadExc.datConExt[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.eas.irRadExc.datConExtWin[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.eas.irRadExc.datConPar[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.eas.irRadExc.datConPar[2].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.eas.irRadExc.surBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.eas.irRadExc.surBou[2].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.eas.irRadGai.datConBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.eas.irRadGai.datConExt[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.eas.irRadGai.datConExtWin[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.eas.irRadGai.datConPar[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.eas.irRadGai.datConPar[2].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.eas.irRadGai.surBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.eas.irRadGai.surBou[2].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.eas.radTem.datConBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.eas.radTem.datConExt[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.eas.radTem.datConExtWin[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.eas.radTem.datConPar[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.eas.radTem.datConPar[2].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.eas.radTem.surBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.eas.radTem.surBou[2].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.eas.solRadExc.datConBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.eas.solRadExc.datConExt[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.eas.solRadExc.datConExtWin[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.eas.solRadExc.datConPar[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.eas.solRadExc.datConPar[2].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.eas.solRadExc.surBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.eas.solRadExc.surBou[2].name will not be stored in the result file, because the signal type is not supported info: Parameter TraceSubstance.flo.eas.surBou[1].name will not be stored in the result file, because the signal type is not supported info: Parameter TraceSubstance.flo.eas.surBou[2].name will not be stored in the result file, because the signal type is not supported info: Parameter TraceSubstance.flo.intGaiFra.delimiter will not be stored in the result file, because the signal type is not supported info: Parameter TraceSubstance.flo.intGaiFra.fileName will not be stored in the result file, because the signal type is not supported info: Parameter TraceSubstance.flo.intGaiFra.tableName will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.nor.air.datConBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.nor.air.datConBou[2].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.nor.air.datConBou[3].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.nor.air.datConExt[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.nor.air.datConExtWin[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.nor.air.datConPar[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.nor.air.datConPar[2].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.nor.air.surBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.nor.bouConExtWin.conPar[1].name will not be stored in the result file, because the signal type is not supported info: Parameter TraceSubstance.flo.nor.datConBou[1].name will not be stored in the result file, because the signal type is not supported info: Parameter TraceSubstance.flo.nor.datConBou[2].name will not be stored in the result file, because the signal type is not supported info: Parameter TraceSubstance.flo.nor.datConBou[3].name will not be stored in the result file, because the signal type is not supported info: Parameter TraceSubstance.flo.nor.datConExt[1].name will not be stored in the result file, because the signal type is not supported info: Parameter TraceSubstance.flo.nor.datConExtWin[1].name will not be stored in the result file, because the signal type is not supported info: Parameter TraceSubstance.flo.nor.datConPar[1].name will not be stored in the result file, because the signal type is not supported info: Parameter TraceSubstance.flo.nor.datConPar[2].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.nor.irRadExc.datConBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.nor.irRadExc.datConBou[2].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.nor.irRadExc.datConBou[3].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.nor.irRadExc.datConExt[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.nor.irRadExc.datConExtWin[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.nor.irRadExc.datConPar[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.nor.irRadExc.datConPar[2].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.nor.irRadExc.surBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.nor.irRadGai.datConBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.nor.irRadGai.datConBou[2].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.nor.irRadGai.datConBou[3].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.nor.irRadGai.datConExt[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.nor.irRadGai.datConExtWin[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.nor.irRadGai.datConPar[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.nor.irRadGai.datConPar[2].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.nor.irRadGai.surBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.nor.radTem.datConBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.nor.radTem.datConBou[2].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.nor.radTem.datConBou[3].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.nor.radTem.datConExt[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.nor.radTem.datConExtWin[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.nor.radTem.datConPar[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.nor.radTem.datConPar[2].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.nor.radTem.surBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.nor.solRadExc.datConBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.nor.solRadExc.datConBou[2].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.nor.solRadExc.datConBou[3].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.nor.solRadExc.datConExt[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.nor.solRadExc.datConExtWin[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.nor.solRadExc.datConPar[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.nor.solRadExc.datConPar[2].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.nor.solRadExc.surBou[1].name will not be stored in the result file, because the signal type is not supported info: Parameter TraceSubstance.flo.nor.surBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.sou.air.datConBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.sou.air.datConBou[2].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.sou.air.datConBou[3].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.sou.air.datConExt[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.sou.air.datConExtWin[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.sou.air.datConPar[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.sou.air.datConPar[2].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.sou.air.surBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.sou.bouConExtWin.conPar[1].name will not be stored in the result file, because the signal type is not supported info: Parameter TraceSubstance.flo.sou.datConBou[1].name will not be stored in the result file, because the signal type is not supported info: Parameter TraceSubstance.flo.sou.datConBou[2].name will not be stored in the result file, because the signal type is not supported info: Parameter TraceSubstance.flo.sou.datConBou[3].name will not be stored in the result file, because the signal type is not supported info: Parameter TraceSubstance.flo.sou.datConExt[1].name will not be stored in the result file, because the signal type is not supported info: Parameter TraceSubstance.flo.sou.datConExtWin[1].name will not be stored in the result file, because the signal type is not supported info: Parameter TraceSubstance.flo.sou.datConPar[1].name will not be stored in the result file, because the signal type is not supported info: Parameter TraceSubstance.flo.sou.datConPar[2].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.sou.irRadExc.datConBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.sou.irRadExc.datConBou[2].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.sou.irRadExc.datConBou[3].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.sou.irRadExc.datConExt[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.sou.irRadExc.datConExtWin[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.sou.irRadExc.datConPar[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.sou.irRadExc.datConPar[2].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.sou.irRadExc.surBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.sou.irRadGai.datConBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.sou.irRadGai.datConBou[2].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.sou.irRadGai.datConBou[3].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.sou.irRadGai.datConExt[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.sou.irRadGai.datConExtWin[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.sou.irRadGai.datConPar[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.sou.irRadGai.datConPar[2].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.sou.irRadGai.surBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.sou.radTem.datConBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.sou.radTem.datConBou[2].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.sou.radTem.datConBou[3].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.sou.radTem.datConExt[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.sou.radTem.datConExtWin[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.sou.radTem.datConPar[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.sou.radTem.datConPar[2].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.sou.radTem.surBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.sou.solRadExc.datConBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.sou.solRadExc.datConBou[2].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.sou.solRadExc.datConBou[3].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.sou.solRadExc.datConExt[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.sou.solRadExc.datConExtWin[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.sou.solRadExc.datConPar[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.sou.solRadExc.datConPar[2].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.sou.solRadExc.surBou[1].name will not be stored in the result file, because the signal type is not supported info: Parameter TraceSubstance.flo.sou.surBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.wes.air.datConBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.wes.air.datConExt[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.wes.air.datConExtWin[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.wes.air.datConPar[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.wes.air.datConPar[2].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.wes.air.surBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.wes.air.surBou[2].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.wes.bouConExtWin.conPar[1].name will not be stored in the result file, because the signal type is not supported info: Parameter TraceSubstance.flo.wes.datConBou[1].name will not be stored in the result file, because the signal type is not supported info: Parameter TraceSubstance.flo.wes.datConExt[1].name will not be stored in the result file, because the signal type is not supported info: Parameter TraceSubstance.flo.wes.datConExtWin[1].name will not be stored in the result file, because the signal type is not supported info: Parameter TraceSubstance.flo.wes.datConPar[1].name will not be stored in the result file, because the signal type is not supported info: Parameter TraceSubstance.flo.wes.datConPar[2].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.wes.irRadExc.datConBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.wes.irRadExc.datConExt[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.wes.irRadExc.datConExtWin[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.wes.irRadExc.datConPar[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.wes.irRadExc.datConPar[2].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.wes.irRadExc.surBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.wes.irRadExc.surBou[2].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.wes.irRadGai.datConBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.wes.irRadGai.datConExt[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.wes.irRadGai.datConExtWin[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.wes.irRadGai.datConPar[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.wes.irRadGai.datConPar[2].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.wes.irRadGai.surBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.wes.irRadGai.surBou[2].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.wes.radTem.datConBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.wes.radTem.datConExt[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.wes.radTem.datConExtWin[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.wes.radTem.datConPar[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.wes.radTem.datConPar[2].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.wes.radTem.surBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.wes.radTem.surBou[2].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.wes.solRadExc.datConBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.wes.solRadExc.datConExt[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.wes.solRadExc.datConExtWin[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.wes.solRadExc.datConPar[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.wes.solRadExc.datConPar[2].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.wes.solRadExc.surBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable TraceSubstance.flo.wes.solRadExc.surBou[2].name will not be stored in the result file, because the signal type is not supported info: Parameter TraceSubstance.flo.wes.surBou[1].name will not be stored in the result file, because the signal type is not supported info: Parameter TraceSubstance.flo.wes.surBou[2].name will not be stored in the result file, because the signal type is not supported info: Parameter TraceSubstance.hvac.conVAV[1].assMes.message will not be stored in the result file, because the signal type is not supported info: Parameter TraceSubstance.hvac.conVAV[2].assMes.message will not be stored in the result file, because the signal type is not supported info: Parameter TraceSubstance.hvac.conVAV[3].assMes.message will not be stored in the result file, because the signal type is not supported info: Parameter TraceSubstance.hvac.conVAV[4].assMes.message will not be stored in the result file, because the signal type is not supported info: Parameter TraceSubstance.hvac.conVAV[5].assMes.message will not be stored in the result file, because the signal type is not supported LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -1.04415e+08 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -1.04415e+08 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -1.04415e+08 should be > 0 LOG_ASSERT | debug | Solving non-linear system 18938 failed at time=4498226.5545672. | | | | For more information please use -lv LOG_NLS. error: [fmi2logger] [fmi2Fatal] TraceSubstance/logStatusFatal: fmi2DoStep: ##CVODE## -8 error occurred at time = 4498200. error: [fmi2logger] [fmi2Fatal] TraceSubstance/logStatusFatal: fmi2DoStep: CVODE integrator step failed. error: [stepUntil] fmi2_doStep failed for FMU "TraceSubstance.root.TraceSubstance" Traceback (most recent call last): File "", line 198, in _run_module_as_main File "", line 88, in _run_code File "/home/hudson/saved_omc/OMSimulator/install/lib/x86_64-linux-gnu/OMSimulator/__main__.py", line 38, in sys.exit(main()) ~~~~^^ File "/home/hudson/saved_omc/OMSimulator/install/lib/x86_64-linux-gnu/OMSimulator/cli.py", line 309, in main handler(args.model, args) ~~~~~~~^^^^^^^^^^^^^^^^^^ File "/home/hudson/saved_omc/OMSimulator/install/lib/x86_64-linux-gnu/OMSimulator/cli.py", line 176, in _runFMU fmu.simulate() ~~~~~~~~~~~~^^ File "/home/hudson/saved_omc/OMSimulator/install/lib/x86_64-linux-gnu/OMSimulator/fmu.py", line 906, in simulate raise RuntimeError(f"Failed to simulate model: {status}") RuntimeError: Failed to simulate model: Status.error info: 0 warnings info: 3 errors