(cd run_OMSimulator-cs-cvode && /home/hudson/saved_omc/OMSimulator/install/bin/OMSimulator  --stripRoot --tempDir=temp_Buildings_13_Buildings_Fluid_HeatPumps_ModularReversible_Examples_TableData2DLoadDepSHC1And2_OMSimulator-cs-cvode_fmu --startTime=0 --stopTime=86400 --stepSize=34.56 --mode=cs --timeout=240 --tolerance=1e-06 ../Buildings_13_Buildings_Fluid_HeatPumps_ModularReversible_Examples_TableData2DLoadDepSHC1And2_OMSimulator-cs-cvode.fmu)
LOG_SOLVER        | info    | CVODE linear multistep method CV_BDF
LOG_SOLVER        | info    | CVODE maximum integration order CV_ITER_NEWTON
LOG_SOLVER        | info    | CVODE use equidistant time grid YES
LOG_SOLVER        | info    | CVODE Using relative error tolerance 1.000000e-06
LOG_SOLVER        | info    | CVODE Using dense internal linear solver SUNLinSol_Dense.
LOG_SOLVER        | info    | CVODE Use internal dense numeric jacobian method.
LOG_SOLVER        | info    | CVODE uses internal root finding method NO
LOG_SOLVER        | info    | CVODE maximum absolut step size 0
LOG_SOLVER        | info    | CVODE initial step size is set automatically
LOG_SOLVER        | info    | CVODE maximum integration order 5
LOG_SOLVER        | info    | CVODE maximum number of nonlinear convergence failures permitted during one step 10
LOG_SOLVER        | info    | CVODE BDF stability limit detection algorithm OFF
info: *** FMU Simulation Info ***
     - model     : Buildings.Fluid.HeatPumps.ModularReversible.Examples.TableData2DLoadDepSHC1And2 (co-simulation)
     - fmiVersion: 2.0
     - startTime : 0.000000
     - stopTime  : 86400.000000
     - tolerance : 1e-06
     - stepSize  : 34.56
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:101:3-101:89:writable]
|                 | |       | The following assertion has been violated at time 0.000000
|                 | |       | ((pumChwPri.pum[1].etaHyd >= 0.0)) --> "Variable violating min constraint: 0.0 <= pumChwPri.pum[1].etaHyd, has value: -1.64299e-45"
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:101:3-101:89:writable]
|                 | |       | The following assertion has been violated at time 0.000000
|                 | |       | ((pumChwPri.pum[2].etaHyd >= 0.0)) --> "Variable violating min constraint: 0.0 <= pumChwPri.pum[2].etaHyd, has value: -1.64299e-45"
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:101:3-101:89:writable]
|                 | |       | The following assertion has been violated at time 0.000000
|                 | |       | ((pumChwPri.pum[3].etaHyd >= 0.0)) --> "Variable violating min constraint: 0.0 <= pumChwPri.pum[3].etaHyd, has value: -1.64299e-45"
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:101:3-101:89:writable]
|                 | |       | The following assertion has been violated at time 0.000000
|                 | |       | ((pumHwPri.pum[1].etaHyd >= 0.0)) --> "Variable violating min constraint: 0.0 <= pumHwPri.pum[1].etaHyd, has value: -4.45264e-44"
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:101:3-101:89:writable]
|                 | |       | The following assertion has been violated at time 0.000000
|                 | |       | ((pumHwPri.pum[2].etaHyd >= 0.0)) --> "Variable violating min constraint: 0.0 <= pumHwPri.pum[2].etaHyd, has value: -4.45264e-44"
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:101:3-101:89:writable]
|                 | |       | The following assertion has been violated at time 0.000000
|                 | |       | ((pumHwPri.pum[3].etaHyd >= 0.0)) --> "Variable violating min constraint: 0.0 <= pumHwPri.pum[3].etaHyd, has value: -4.45264e-44"
info:    Result file: Buildings_13_Buildings_Fluid_HeatPumps_ModularReversible_Examples_TableData2DLoadDepSHC1And2_OMSimulator-cs-cvode_res.mat (bufferSize=10)
info:    Parameter TableData2DLoadDepSHC1And2.assMes.message will not be stored in the result file, because the signal type is not supported
info:    Parameter TableData2DLoadDepSHC1And2.dat.devIde will not be stored in the result file, because the signal type is not supported
info:    Variable TableData2DLoadDepSHC1And2.dat.tabNamPCoo[1] will not be stored in the result file, because the signal type is not supported
info:    Variable TableData2DLoadDepSHC1And2.dat.tabNamPHea[1] will not be stored in the result file, because the signal type is not supported
info:    Variable TableData2DLoadDepSHC1And2.dat.tabNamPShc[1] will not be stored in the result file, because the signal type is not supported
info:    Variable TableData2DLoadDepSHC1And2.dat.tabNamQCoo[1] will not be stored in the result file, because the signal type is not supported
info:    Variable TableData2DLoadDepSHC1And2.dat.tabNamQHea[1] will not be stored in the result file, because the signal type is not supported
info:    Variable TableData2DLoadDepSHC1And2.dat.tabNamQShc[1] will not be stored in the result file, because the signal type is not supported
info:    Variable TableData2DLoadDepSHC1And2.hp.dat.devIde will not be stored in the result file, because the signal type is not supported
info:    Variable TableData2DLoadDepSHC1And2.hp.dat.fileNameCoo will not be stored in the result file, because the signal type is not supported
info:    Variable TableData2DLoadDepSHC1And2.hp.dat.fileNameHea will not be stored in the result file, because the signal type is not supported
info:    Variable TableData2DLoadDepSHC1And2.hp.dat.fileNameShc will not be stored in the result file, because the signal type is not supported
info:    Variable TableData2DLoadDepSHC1And2.hp.dat.tabNamPCoo[1] will not be stored in the result file, because the signal type is not supported
info:    Variable TableData2DLoadDepSHC1And2.hp.dat.tabNamPHea[1] will not be stored in the result file, because the signal type is not supported
info:    Variable TableData2DLoadDepSHC1And2.hp.dat.tabNamPShc[1] will not be stored in the result file, because the signal type is not supported
info:    Variable TableData2DLoadDepSHC1And2.hp.dat.tabNamQCoo[1] will not be stored in the result file, because the signal type is not supported
info:    Variable TableData2DLoadDepSHC1And2.hp.dat.tabNamQHea[1] will not be stored in the result file, because the signal type is not supported
info:    Variable TableData2DLoadDepSHC1And2.hp.dat.tabNamQShc[1] will not be stored in the result file, because the signal type is not supported
info:    Variable TableData2DLoadDepSHC1And2.hp.refCyc.refCycHeaPumHea.calQUseP.fileNameCoo will not be stored in the result file, because the signal type is not supported
info:    Variable TableData2DLoadDepSHC1And2.hp.refCyc.refCycHeaPumHea.calQUseP.fileNameHea will not be stored in the result file, because the signal type is not supported
info:    Variable TableData2DLoadDepSHC1And2.hp.refCyc.refCycHeaPumHea.calQUseP.fileNameShc will not be stored in the result file, because the signal type is not supported
info:    Variable TableData2DLoadDepSHC1And2.hp.refCyc.refCycHeaPumHea.calQUseP.tabNamPCoo[1] will not be stored in the result file, because the signal type is not supported
info:    Variable TableData2DLoadDepSHC1And2.hp.refCyc.refCycHeaPumHea.calQUseP.tabNamPHea[1] will not be stored in the result file, because the signal type is not supported
info:    Variable TableData2DLoadDepSHC1And2.hp.refCyc.refCycHeaPumHea.calQUseP.tabNamPShc[1] will not be stored in the result file, because the signal type is not supported
info:    Variable TableData2DLoadDepSHC1And2.hp.refCyc.refCycHeaPumHea.calQUseP.tabNamQCoo[1] will not be stored in the result file, because the signal type is not supported
info:    Variable TableData2DLoadDepSHC1And2.hp.refCyc.refCycHeaPumHea.calQUseP.tabNamQHea[1] will not be stored in the result file, because the signal type is not supported
info:    Variable TableData2DLoadDepSHC1And2.hp.refCyc.refCycHeaPumHea.calQUseP.tabNamQShc[1] will not be stored in the result file, because the signal type is not supported
info:    Variable TableData2DLoadDepSHC1And2.hp.refCyc.refCycHeaPumHea.dat.devIde will not be stored in the result file, because the signal type is not supported
info:    Variable TableData2DLoadDepSHC1And2.hp.refCyc.refCycHeaPumHea.dat.fileNameCoo will not be stored in the result file, because the signal type is not supported
info:    Variable TableData2DLoadDepSHC1And2.hp.refCyc.refCycHeaPumHea.dat.fileNameHea will not be stored in the result file, because the signal type is not supported
info:    Variable TableData2DLoadDepSHC1And2.hp.refCyc.refCycHeaPumHea.dat.fileNameShc will not be stored in the result file, because the signal type is not supported
info:    Variable TableData2DLoadDepSHC1And2.hp.refCyc.refCycHeaPumHea.dat.tabNamPCoo[1] will not be stored in the result file, because the signal type is not supported
info:    Variable TableData2DLoadDepSHC1And2.hp.refCyc.refCycHeaPumHea.dat.tabNamPHea[1] will not be stored in the result file, because the signal type is not supported
info:    Variable TableData2DLoadDepSHC1And2.hp.refCyc.refCycHeaPumHea.dat.tabNamPShc[1] will not be stored in the result file, because the signal type is not supported
info:    Variable TableData2DLoadDepSHC1And2.hp.refCyc.refCycHeaPumHea.dat.tabNamQCoo[1] will not be stored in the result file, because the signal type is not supported
info:    Variable TableData2DLoadDepSHC1And2.hp.refCyc.refCycHeaPumHea.dat.tabNamQHea[1] will not be stored in the result file, because the signal type is not supported
info:    Variable TableData2DLoadDepSHC1And2.hp.refCyc.refCycHeaPumHea.dat.tabNamQShc[1] will not be stored in the result file, because the signal type is not supported
info:    Variable TableData2DLoadDepSHC1And2.hp.refCyc.refCycHeaPumHea.devIde will not be stored in the result file, because the signal type is not supported