(cd run_OMSimulator-cs-cvode && /home/hudson/saved_omc/OMSimulator/install/bin/OMSimulator --stripRoot --tempDir=temp_Buildings_13_Buildings_Examples_VAVReheat_ASHRAE2006_OMSimulator-cs-cvode_fmu --startTime=0 --stopTime=172800 --stepSize=69.12 --mode=cs --timeout=240 --tolerance=1e-06 ../Buildings_13_Buildings_Examples_VAVReheat_ASHRAE2006_OMSimulator-cs-cvode.fmu) LOG_SOLVER | info | CVODE linear multistep method CV_BDF LOG_SOLVER | info | CVODE maximum integration order CV_ITER_NEWTON LOG_SOLVER | info | CVODE use equidistant time grid YES LOG_SOLVER | info | CVODE Using relative error tolerance 1.000000e-06 LOG_SOLVER | info | CVODE Using dense internal linear solver SUNLinSol_Dense. LOG_SOLVER | info | CVODE Use internal dense numeric jacobian method. LOG_SOLVER | info | CVODE uses internal root finding method NO LOG_SOLVER | info | CVODE maximum absolut step size 0 LOG_SOLVER | info | CVODE initial step size is set automatically LOG_SOLVER | info | CVODE maximum integration order 5 LOG_SOLVER | info | CVODE maximum number of nonlinear convergence failures permitted during one step 10 LOG_SOLVER | info | CVODE BDF stability limit detection algorithm OFF info: *** FMU Simulation Info *** - model : Buildings.Examples.VAVReheat.ASHRAE2006 (co-simulation) - fmiVersion: 2.0 - startTime : 0.000000 - stopTime : 172800.000000 - tolerance : 1e-06 - stepSize : 69.12 LOG_ASSERT | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/ThermalZones/Detailed/BaseClasses/InfraredRadiationExchange.mo:70:3-74:37:writable] | | | | The following assertion has been violated at time 0.000000 | | | | ((flo.cor.irRadExc.G[8] >= 0.0)) --> "Variable violating min constraint: 0.0 <= flo.cor.irRadExc.G[8], has value: -27687.2" LOG_ASSERT | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/ThermalZones/Detailed/BaseClasses/InfraredRadiationExchange.mo:70:3-74:37:writable] | | | | The following assertion has been violated at time 0.000000 | | | | ((flo.cor.irRadExc.G[7] >= 0.0)) --> "Variable violating min constraint: 0.0 <= flo.cor.irRadExc.G[7], has value: -46768.8" LOG_ASSERT | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/ThermalZones/Detailed/BaseClasses/InfraredRadiationExchange.mo:70:3-74:37:writable] | | | | The following assertion has been violated at time 0.000000 | | | | ((flo.cor.irRadExc.G[6] >= 0.0)) --> "Variable violating min constraint: 0.0 <= flo.cor.irRadExc.G[6], has value: -27687.2" LOG_ASSERT | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/ThermalZones/Detailed/BaseClasses/InfraredRadiationExchange.mo:70:3-74:37:writable] | | | | The following assertion has been violated at time 0.000000 | | | | ((flo.cor.irRadExc.G[5] >= 0.0)) --> "Variable violating min constraint: 0.0 <= flo.cor.irRadExc.G[5], has value: -46768.8" LOG_ASSERT | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/ThermalZones/Detailed/BaseClasses/InfraredRadiationExchange.mo:70:3-74:37:writable] | | | | The following assertion has been violated at time 0.000000 | | | | ((flo.cor.irRadExc.G[4] >= 0.0)) --> "Variable violating min constraint: 0.0 <= flo.cor.irRadExc.G[4], has value: -823717" LOG_ASSERT | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/ThermalZones/Detailed/BaseClasses/InfraredRadiationExchange.mo:70:3-74:37:writable] | | | | The following assertion has been violated at time 0.000000 | | | | ((flo.cor.irRadExc.G[3] >= 0.0)) --> "Variable violating min constraint: 0.0 <= flo.cor.irRadExc.G[3], has value: -412347" LOG_ASSERT | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/ThermalZones/Detailed/BaseClasses/InfraredRadiationExchange.mo:70:3-74:37:writable] | | | | The following assertion has been violated at time 0.000000 | | | | ((flo.cor.irRadExc.G[2] >= 0.0)) --> "Variable violating min constraint: 0.0 <= flo.cor.irRadExc.G[2], has value: -823717" LOG_ASSERT | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/ThermalZones/Detailed/BaseClasses/InfraredRadiationExchange.mo:70:3-74:37:writable] | | | | The following assertion has been violated at time 0.000000 | | | | ((flo.cor.irRadExc.G[1] >= 0.0)) --> "Variable violating min constraint: 0.0 <= flo.cor.irRadExc.G[1], has value: -412347" LOG_ASSERT | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/ThermalZones/Detailed/BaseClasses/InfraredRadiationExchange.mo:70:3-74:37:writable] | | | | The following assertion has been violated at time 0.000000 | | | | ((flo.wes.irRadExc.G[8] >= 0.0)) --> "Variable violating min constraint: 0.0 <= flo.wes.irRadExc.G[8], has value: -25577" LOG_ASSERT | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/ThermalZones/Detailed/BaseClasses/InfraredRadiationExchange.mo:70:3-74:37:writable] | | | | The following assertion has been violated at time 0.000000 | | | | ((flo.wes.irRadExc.G[7] >= 0.0)) --> "Variable violating min constraint: 0.0 <= flo.wes.irRadExc.G[7], has value: -7423.8" LOG_ASSERT | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/ThermalZones/Detailed/BaseClasses/InfraredRadiationExchange.mo:70:3-74:37:writable] | | | | The following assertion has been violated at time 0.000000 | | | | ((flo.wes.irRadExc.G[6] >= 0.0)) --> "Variable violating min constraint: 0.0 <= flo.wes.irRadExc.G[6], has value: -7423.8" LOG_ASSERT | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/ThermalZones/Detailed/BaseClasses/InfraredRadiationExchange.mo:70:3-74:37:writable] | | | | The following assertion has been violated at time 0.000000 | | | | ((flo.wes.irRadExc.G[5] >= 0.0)) --> "Variable violating min constraint: 0.0 <= flo.wes.irRadExc.G[5], has value: -27687.2" LOG_ASSERT | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/ThermalZones/Detailed/BaseClasses/InfraredRadiationExchange.mo:70:3-74:37:writable] | | | | The following assertion has been violated at time 0.000000 | | | | ((flo.wes.irRadExc.G[4] >= 0.0)) --> "Variable violating min constraint: 0.0 <= flo.wes.irRadExc.G[4], has value: -109934" LOG_ASSERT | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/ThermalZones/Detailed/BaseClasses/InfraredRadiationExchange.mo:70:3-74:37:writable] | | | | The following assertion has been violated at time 0.000000 | | | | ((flo.wes.irRadExc.G[3] >= 0.0)) --> "Variable violating min constraint: 0.0 <= flo.wes.irRadExc.G[3], has value: -55032.3" LOG_ASSERT | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/ThermalZones/Detailed/BaseClasses/InfraredRadiationExchange.mo:70:3-74:37:writable] | | | | The following assertion has been violated at time 0.000000 | | | | ((flo.wes.irRadExc.G[2] >= 0.0)) --> "Variable violating min constraint: 0.0 <= flo.wes.irRadExc.G[2], has value: -109934" LOG_ASSERT | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/ThermalZones/Detailed/BaseClasses/InfraredRadiationExchange.mo:70:3-74:37:writable] | | | | The following assertion has been violated at time 0.000000 | | | | ((flo.wes.irRadExc.G[1] >= 0.0)) --> "Variable violating min constraint: 0.0 <= flo.wes.irRadExc.G[1], has value: -55032.3" LOG_ASSERT | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/ThermalZones/Detailed/BaseClasses/InfraredRadiationExchange.mo:70:3-74:37:writable] | | | | The following assertion has been violated at time 0.000000 | | | | ((flo.nor.irRadExc.G[8] >= 0.0)) --> "Variable violating min constraint: 0.0 <= flo.nor.irRadExc.G[8], has value: -38369.3" LOG_ASSERT | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/ThermalZones/Detailed/BaseClasses/InfraredRadiationExchange.mo:70:3-74:37:writable] | | | | The following assertion has been violated at time 0.000000 | | | | ((flo.nor.irRadExc.G[7] >= 0.0)) --> "Variable violating min constraint: 0.0 <= flo.nor.irRadExc.G[7], has value: -7423.8" LOG_ASSERT | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/ThermalZones/Detailed/BaseClasses/InfraredRadiationExchange.mo:70:3-74:37:writable] | | | | The following assertion has been violated at time 0.000000 | | | | ((flo.nor.irRadExc.G[6] >= 0.0)) --> "Variable violating min constraint: 0.0 <= flo.nor.irRadExc.G[6], has value: -46768.8" LOG_ASSERT | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/ThermalZones/Detailed/BaseClasses/InfraredRadiationExchange.mo:70:3-74:37:writable] | | | | The following assertion has been violated at time 0.000000 | | | | ((flo.nor.irRadExc.G[5] >= 0.0)) --> "Variable violating min constraint: 0.0 <= flo.nor.irRadExc.G[5], has value: -7423.8" LOG_ASSERT | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/ThermalZones/Detailed/BaseClasses/InfraredRadiationExchange.mo:70:3-74:37:writable] | | | | The following assertion has been violated at time 0.000000 | | | | ((flo.nor.irRadExc.G[4] >= 0.0)) --> "Variable violating min constraint: 0.0 <= flo.nor.irRadExc.G[4], has value: -173654" LOG_ASSERT | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/ThermalZones/Detailed/BaseClasses/InfraredRadiationExchange.mo:70:3-74:37:writable] | | | | The following assertion has been violated at time 0.000000 | | | | ((flo.nor.irRadExc.G[3] >= 0.0)) --> "Variable violating min constraint: 0.0 <= flo.nor.irRadExc.G[3], has value: -86927.6" LOG_ASSERT | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/ThermalZones/Detailed/BaseClasses/InfraredRadiationExchange.mo:70:3-74:37:writable] | | | | The following assertion has been violated at time 0.000000 | | | | ((flo.nor.irRadExc.G[2] >= 0.0)) --> "Variable violating min constraint: 0.0 <= flo.nor.irRadExc.G[2], has value: -173654" LOG_ASSERT | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/ThermalZones/Detailed/BaseClasses/InfraredRadiationExchange.mo:70:3-74:37:writable] | | | | The following assertion has been violated at time 0.000000 | | | | ((flo.nor.irRadExc.G[1] >= 0.0)) --> "Variable violating min constraint: 0.0 <= flo.nor.irRadExc.G[1], has value: -86927.6" LOG_ASSERT | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/ThermalZones/Detailed/BaseClasses/InfraredRadiationExchange.mo:70:3-74:37:writable] | | | | The following assertion has been violated at time 0.000000 | | | | ((flo.eas.irRadExc.G[8] >= 0.0)) --> "Variable violating min constraint: 0.0 <= flo.eas.irRadExc.G[8], has value: -25577" LOG_ASSERT | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/ThermalZones/Detailed/BaseClasses/InfraredRadiationExchange.mo:70:3-74:37:writable] | | | | The following assertion has been violated at time 0.000000 | | | | ((flo.eas.irRadExc.G[7] >= 0.0)) --> "Variable violating min constraint: 0.0 <= flo.eas.irRadExc.G[7], has value: -7423.8" LOG_ASSERT | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/ThermalZones/Detailed/BaseClasses/InfraredRadiationExchange.mo:70:3-74:37:writable] | | | | The following assertion has been violated at time 0.000000 | | | | ((flo.eas.irRadExc.G[6] >= 0.0)) --> "Variable violating min constraint: 0.0 <= flo.eas.irRadExc.G[6], has value: -7423.8" LOG_ASSERT | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/ThermalZones/Detailed/BaseClasses/InfraredRadiationExchange.mo:70:3-74:37:writable] | | | | The following assertion has been violated at time 0.000000 | | | | ((flo.eas.irRadExc.G[5] >= 0.0)) --> "Variable violating min constraint: 0.0 <= flo.eas.irRadExc.G[5], has value: -27687.2" LOG_ASSERT | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/ThermalZones/Detailed/BaseClasses/InfraredRadiationExchange.mo:70:3-74:37:writable] | | | | The following assertion has been violated at time 0.000000 | | | | ((flo.eas.irRadExc.G[4] >= 0.0)) --> "Variable violating min constraint: 0.0 <= flo.eas.irRadExc.G[4], has value: -109934" LOG_ASSERT | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/ThermalZones/Detailed/BaseClasses/InfraredRadiationExchange.mo:70:3-74:37:writable] | | | | The following assertion has been violated at time 0.000000 | | | | ((flo.eas.irRadExc.G[3] >= 0.0)) --> "Variable violating min constraint: 0.0 <= flo.eas.irRadExc.G[3], has value: -55032.3" LOG_ASSERT | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/ThermalZones/Detailed/BaseClasses/InfraredRadiationExchange.mo:70:3-74:37:writable] | | | | The following assertion has been violated at time 0.000000 | | | | ((flo.eas.irRadExc.G[2] >= 0.0)) --> "Variable violating min constraint: 0.0 <= flo.eas.irRadExc.G[2], has value: -109934" LOG_ASSERT | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/ThermalZones/Detailed/BaseClasses/InfraredRadiationExchange.mo:70:3-74:37:writable] | | | | The following assertion has been violated at time 0.000000 | | | | ((flo.eas.irRadExc.G[1] >= 0.0)) --> "Variable violating min constraint: 0.0 <= flo.eas.irRadExc.G[1], has value: -55032.3" LOG_ASSERT | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/ThermalZones/Detailed/BaseClasses/InfraredRadiationExchange.mo:70:3-74:37:writable] | | | | The following assertion has been violated at time 0.000000 | | | | ((flo.sou.irRadExc.G[8] >= 0.0)) --> "Variable violating min constraint: 0.0 <= flo.sou.irRadExc.G[8], has value: -38369.3" LOG_ASSERT | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/ThermalZones/Detailed/BaseClasses/InfraredRadiationExchange.mo:70:3-74:37:writable] | | | | The following assertion has been violated at time 0.000000 | | | | ((flo.sou.irRadExc.G[7] >= 0.0)) --> "Variable violating min constraint: 0.0 <= flo.sou.irRadExc.G[7], has value: -7423.8" LOG_ASSERT | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/ThermalZones/Detailed/BaseClasses/InfraredRadiationExchange.mo:70:3-74:37:writable] | | | | The following assertion has been violated at time 0.000000 | | | | ((flo.sou.irRadExc.G[6] >= 0.0)) --> "Variable violating min constraint: 0.0 <= flo.sou.irRadExc.G[6], has value: -46768.8" LOG_ASSERT | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/ThermalZones/Detailed/BaseClasses/InfraredRadiationExchange.mo:70:3-74:37:writable] | | | | The following assertion has been violated at time 0.000000 | | | | ((flo.sou.irRadExc.G[5] >= 0.0)) --> "Variable violating min constraint: 0.0 <= flo.sou.irRadExc.G[5], has value: -7423.8" LOG_ASSERT | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/ThermalZones/Detailed/BaseClasses/InfraredRadiationExchange.mo:70:3-74:37:writable] | | | | The following assertion has been violated at time 0.000000 | | | | ((flo.sou.irRadExc.G[4] >= 0.0)) --> "Variable violating min constraint: 0.0 <= flo.sou.irRadExc.G[4], has value: -173654" LOG_ASSERT | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/ThermalZones/Detailed/BaseClasses/InfraredRadiationExchange.mo:70:3-74:37:writable] | | | | The following assertion has been violated at time 0.000000 | | | | ((flo.sou.irRadExc.G[3] >= 0.0)) --> "Variable violating min constraint: 0.0 <= flo.sou.irRadExc.G[3], has value: -86927.6" LOG_ASSERT | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/ThermalZones/Detailed/BaseClasses/InfraredRadiationExchange.mo:70:3-74:37:writable] | | | | The following assertion has been violated at time 0.000000 | | | | ((flo.sou.irRadExc.G[2] >= 0.0)) --> "Variable violating min constraint: 0.0 <= flo.sou.irRadExc.G[2], has value: -173654" LOG_ASSERT | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/ThermalZones/Detailed/BaseClasses/InfraredRadiationExchange.mo:70:3-74:37:writable] | | | | The following assertion has been violated at time 0.000000 | | | | ((flo.sou.irRadExc.G[1] >= 0.0)) --> "Variable violating min constraint: 0.0 <= flo.sou.irRadExc.G[1], has value: -86927.6" info: Result file: Buildings_13_Buildings_Examples_VAVReheat_ASHRAE2006_OMSimulator-cs-cvode_res.mat (bufferSize=10) info: Variable ASHRAE2006.flo.cor.air.datConBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.cor.air.datConExt[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.cor.air.datConExtWin[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.cor.air.datConPar[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.cor.air.datConPar[2].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.cor.air.surBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.cor.air.surBou[2].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.cor.air.surBou[3].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.cor.air.surBou[4].name will not be stored in the result file, because the signal type is not supported info: Parameter ASHRAE2006.flo.cor.datConBou[1].name will not be stored in the result file, because the signal type is not supported info: Parameter ASHRAE2006.flo.cor.datConExt[1].name will not be stored in the result file, because the signal type is not supported info: Parameter ASHRAE2006.flo.cor.datConExtWin[1].name will not be stored in the result file, because the signal type is not supported info: Parameter ASHRAE2006.flo.cor.datConPar[1].name will not be stored in the result file, because the signal type is not supported info: Parameter ASHRAE2006.flo.cor.datConPar[2].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.cor.irRadExc.datConBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.cor.irRadExc.datConExt[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.cor.irRadExc.datConExtWin[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.cor.irRadExc.datConPar[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.cor.irRadExc.datConPar[2].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.cor.irRadExc.surBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.cor.irRadExc.surBou[2].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.cor.irRadExc.surBou[3].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.cor.irRadExc.surBou[4].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.cor.irRadGai.datConBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.cor.irRadGai.datConExt[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.cor.irRadGai.datConExtWin[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.cor.irRadGai.datConPar[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.cor.irRadGai.datConPar[2].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.cor.irRadGai.surBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.cor.irRadGai.surBou[2].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.cor.irRadGai.surBou[3].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.cor.irRadGai.surBou[4].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.cor.radTem.datConBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.cor.radTem.datConExt[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.cor.radTem.datConExtWin[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.cor.radTem.datConPar[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.cor.radTem.datConPar[2].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.cor.radTem.surBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.cor.radTem.surBou[2].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.cor.radTem.surBou[3].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.cor.radTem.surBou[4].name will not be stored in the result file, because the signal type is not supported info: Parameter ASHRAE2006.flo.cor.surBou[1].name will not be stored in the result file, because the signal type is not supported info: Parameter ASHRAE2006.flo.cor.surBou[2].name will not be stored in the result file, because the signal type is not supported info: Parameter ASHRAE2006.flo.cor.surBou[3].name will not be stored in the result file, because the signal type is not supported info: Parameter ASHRAE2006.flo.cor.surBou[4].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.eas.air.datConBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.eas.air.datConExt[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.eas.air.datConExtWin[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.eas.air.datConPar[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.eas.air.datConPar[2].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.eas.air.surBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.eas.air.surBou[2].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.eas.bouConExtWin.conPar[1].name will not be stored in the result file, because the signal type is not supported info: Parameter ASHRAE2006.flo.eas.datConBou[1].name will not be stored in the result file, because the signal type is not supported info: Parameter ASHRAE2006.flo.eas.datConExt[1].name will not be stored in the result file, because the signal type is not supported info: Parameter ASHRAE2006.flo.eas.datConExtWin[1].name will not be stored in the result file, because the signal type is not supported info: Parameter ASHRAE2006.flo.eas.datConPar[1].name will not be stored in the result file, because the signal type is not supported info: Parameter ASHRAE2006.flo.eas.datConPar[2].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.eas.irRadExc.datConBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.eas.irRadExc.datConExt[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.eas.irRadExc.datConExtWin[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.eas.irRadExc.datConPar[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.eas.irRadExc.datConPar[2].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.eas.irRadExc.surBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.eas.irRadExc.surBou[2].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.eas.irRadGai.datConBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.eas.irRadGai.datConExt[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.eas.irRadGai.datConExtWin[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.eas.irRadGai.datConPar[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.eas.irRadGai.datConPar[2].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.eas.irRadGai.surBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.eas.irRadGai.surBou[2].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.eas.radTem.datConBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.eas.radTem.datConExt[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.eas.radTem.datConExtWin[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.eas.radTem.datConPar[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.eas.radTem.datConPar[2].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.eas.radTem.surBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.eas.radTem.surBou[2].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.eas.solRadExc.datConBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.eas.solRadExc.datConExt[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.eas.solRadExc.datConExtWin[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.eas.solRadExc.datConPar[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.eas.solRadExc.datConPar[2].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.eas.solRadExc.surBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.eas.solRadExc.surBou[2].name will not be stored in the result file, because the signal type is not supported info: Parameter ASHRAE2006.flo.eas.surBou[1].name will not be stored in the result file, because the signal type is not supported info: Parameter ASHRAE2006.flo.eas.surBou[2].name will not be stored in the result file, because the signal type is not supported info: Parameter ASHRAE2006.flo.intGaiFra.delimiter will not be stored in the result file, because the signal type is not supported info: Parameter ASHRAE2006.flo.intGaiFra.fileName will not be stored in the result file, because the signal type is not supported info: Parameter ASHRAE2006.flo.intGaiFra.tableName will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.nor.air.datConBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.nor.air.datConBou[2].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.nor.air.datConBou[3].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.nor.air.datConExt[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.nor.air.datConExtWin[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.nor.air.datConPar[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.nor.air.datConPar[2].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.nor.air.surBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.nor.bouConExtWin.conPar[1].name will not be stored in the result file, because the signal type is not supported info: Parameter ASHRAE2006.flo.nor.datConBou[1].name will not be stored in the result file, because the signal type is not supported info: Parameter ASHRAE2006.flo.nor.datConBou[2].name will not be stored in the result file, because the signal type is not supported info: Parameter ASHRAE2006.flo.nor.datConBou[3].name will not be stored in the result file, because the signal type is not supported info: Parameter ASHRAE2006.flo.nor.datConExt[1].name will not be stored in the result file, because the signal type is not supported info: Parameter ASHRAE2006.flo.nor.datConExtWin[1].name will not be stored in the result file, because the signal type is not supported info: Parameter ASHRAE2006.flo.nor.datConPar[1].name will not be stored in the result file, because the signal type is not supported info: Parameter ASHRAE2006.flo.nor.datConPar[2].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.nor.irRadExc.datConBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.nor.irRadExc.datConBou[2].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.nor.irRadExc.datConBou[3].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.nor.irRadExc.datConExt[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.nor.irRadExc.datConExtWin[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.nor.irRadExc.datConPar[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.nor.irRadExc.datConPar[2].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.nor.irRadExc.surBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.nor.irRadGai.datConBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.nor.irRadGai.datConBou[2].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.nor.irRadGai.datConBou[3].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.nor.irRadGai.datConExt[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.nor.irRadGai.datConExtWin[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.nor.irRadGai.datConPar[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.nor.irRadGai.datConPar[2].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.nor.irRadGai.surBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.nor.radTem.datConBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.nor.radTem.datConBou[2].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.nor.radTem.datConBou[3].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.nor.radTem.datConExt[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.nor.radTem.datConExtWin[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.nor.radTem.datConPar[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.nor.radTem.datConPar[2].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.nor.radTem.surBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.nor.solRadExc.datConBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.nor.solRadExc.datConBou[2].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.nor.solRadExc.datConBou[3].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.nor.solRadExc.datConExt[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.nor.solRadExc.datConExtWin[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.nor.solRadExc.datConPar[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.nor.solRadExc.datConPar[2].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.nor.solRadExc.surBou[1].name will not be stored in the result file, because the signal type is not supported info: Parameter ASHRAE2006.flo.nor.surBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.sou.air.datConBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.sou.air.datConBou[2].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.sou.air.datConBou[3].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.sou.air.datConExt[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.sou.air.datConExtWin[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.sou.air.datConPar[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.sou.air.datConPar[2].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.sou.air.surBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.sou.bouConExtWin.conPar[1].name will not be stored in the result file, because the signal type is not supported info: Parameter ASHRAE2006.flo.sou.datConBou[1].name will not be stored in the result file, because the signal type is not supported info: Parameter ASHRAE2006.flo.sou.datConBou[2].name will not be stored in the result file, because the signal type is not supported info: Parameter ASHRAE2006.flo.sou.datConBou[3].name will not be stored in the result file, because the signal type is not supported info: Parameter ASHRAE2006.flo.sou.datConExt[1].name will not be stored in the result file, because the signal type is not supported info: Parameter ASHRAE2006.flo.sou.datConExtWin[1].name will not be stored in the result file, because the signal type is not supported info: Parameter ASHRAE2006.flo.sou.datConPar[1].name will not be stored in the result file, because the signal type is not supported info: Parameter ASHRAE2006.flo.sou.datConPar[2].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.sou.irRadExc.datConBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.sou.irRadExc.datConBou[2].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.sou.irRadExc.datConBou[3].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.sou.irRadExc.datConExt[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.sou.irRadExc.datConExtWin[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.sou.irRadExc.datConPar[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.sou.irRadExc.datConPar[2].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.sou.irRadExc.surBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.sou.irRadGai.datConBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.sou.irRadGai.datConBou[2].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.sou.irRadGai.datConBou[3].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.sou.irRadGai.datConExt[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.sou.irRadGai.datConExtWin[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.sou.irRadGai.datConPar[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.sou.irRadGai.datConPar[2].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.sou.irRadGai.surBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.sou.radTem.datConBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.sou.radTem.datConBou[2].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.sou.radTem.datConBou[3].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.sou.radTem.datConExt[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.sou.radTem.datConExtWin[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.sou.radTem.datConPar[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.sou.radTem.datConPar[2].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.sou.radTem.surBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.sou.solRadExc.datConBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.sou.solRadExc.datConBou[2].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.sou.solRadExc.datConBou[3].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.sou.solRadExc.datConExt[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.sou.solRadExc.datConExtWin[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.sou.solRadExc.datConPar[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.sou.solRadExc.datConPar[2].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.sou.solRadExc.surBou[1].name will not be stored in the result file, because the signal type is not supported info: Parameter ASHRAE2006.flo.sou.surBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.wes.air.datConBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.wes.air.datConExt[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.wes.air.datConExtWin[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.wes.air.datConPar[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.wes.air.datConPar[2].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.wes.air.surBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.wes.air.surBou[2].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.wes.bouConExtWin.conPar[1].name will not be stored in the result file, because the signal type is not supported info: Parameter ASHRAE2006.flo.wes.datConBou[1].name will not be stored in the result file, because the signal type is not supported info: Parameter ASHRAE2006.flo.wes.datConExt[1].name will not be stored in the result file, because the signal type is not supported info: Parameter ASHRAE2006.flo.wes.datConExtWin[1].name will not be stored in the result file, because the signal type is not supported info: Parameter ASHRAE2006.flo.wes.datConPar[1].name will not be stored in the result file, because the signal type is not supported info: Parameter ASHRAE2006.flo.wes.datConPar[2].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.wes.irRadExc.datConBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.wes.irRadExc.datConExt[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.wes.irRadExc.datConExtWin[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.wes.irRadExc.datConPar[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.wes.irRadExc.datConPar[2].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.wes.irRadExc.surBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.wes.irRadExc.surBou[2].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.wes.irRadGai.datConBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.wes.irRadGai.datConExt[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.wes.irRadGai.datConExtWin[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.wes.irRadGai.datConPar[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.wes.irRadGai.datConPar[2].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.wes.irRadGai.surBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.wes.irRadGai.surBou[2].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.wes.radTem.datConBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.wes.radTem.datConExt[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.wes.radTem.datConExtWin[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.wes.radTem.datConPar[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.wes.radTem.datConPar[2].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.wes.radTem.surBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.wes.radTem.surBou[2].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.wes.solRadExc.datConBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.wes.solRadExc.datConExt[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.wes.solRadExc.datConExtWin[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.wes.solRadExc.datConPar[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.wes.solRadExc.datConPar[2].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.wes.solRadExc.surBou[1].name will not be stored in the result file, because the signal type is not supported info: Variable ASHRAE2006.flo.wes.solRadExc.surBou[2].name will not be stored in the result file, because the signal type is not supported info: Parameter ASHRAE2006.flo.wes.surBou[1].name will not be stored in the result file, because the signal type is not supported info: Parameter ASHRAE2006.flo.wes.surBou[2].name will not be stored in the result file, because the signal type is not supported info: Parameter ASHRAE2006.hvac.conVAV[1].assMes.message will not be stored in the result file, because the signal type is not supported info: Parameter ASHRAE2006.hvac.conVAV[2].assMes.message will not be stored in the result file, because the signal type is not supported info: Parameter ASHRAE2006.hvac.conVAV[3].assMes.message will not be stored in the result file, because the signal type is not supported info: Parameter ASHRAE2006.hvac.conVAV[4].assMes.message will not be stored in the result file, because the signal type is not supported info: Parameter ASHRAE2006.hvac.conVAV[5].assMes.message will not be stored in the result file, because the signal type is not supported LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -420.973 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -200.521 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -56.125 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -409887 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -268417 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -175753 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -115059 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -75304 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -49264.6 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -32208.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -21037.2 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -13719.8 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -8926.89 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -5787.55 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -3731.28 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -2384.42 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -1502.23 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -924.399 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -545.918 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -298.012 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -135.634 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -29.2768 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -1.06177e+10 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -6.95458e+09 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -4.55525e+09 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -2.98369e+09 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -1.95432e+09 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -1.28008e+09 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -8.3845e+08 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -5.49185e+08 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -3.59716e+08 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -2.35614e+08 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -1.54327e+08 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -1.01084e+08 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -6.62101e+07 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -4.33676e+07 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -2.84057e+07 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -1.86057e+07 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -1.21867e+07 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -7.98223e+06 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -5.22832e+06 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -3.4245e+06 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -2.243e+06 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -1.46912e+06 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -962229 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -5648.28 should be > 0 LOG_STDOUT | warning | While solving non-linear system an assertion failed at time 59564.6. | | | | | The non-linear solver tries to solve the problem that could take some time. | | | | | It could help to provide better start-values for the iteration variables. | | | | | For more information simulate with -lv LOG_NLS_V LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -5648.28 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -5438.21 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -2459.87 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -3.33067e-14 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -9452.55 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -6482.55 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -6779.55 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -5648.28 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -9834.67 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -9834.67 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -10131.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -2459.87 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -3.33067e-14 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -9452.55 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -6482.55 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -6779.55 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -5648.28 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -12804.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -9834.67 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -10131.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -12804.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -9834.67 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -10131.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -12804.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -9834.67 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -10131.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -12804.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -9834.67 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -10131.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -5648.28 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -9834.67 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -10131.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -2459.87 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was 0 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -9452.55 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -6482.55 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -6779.55 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -5648.28 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -9834.67 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -9834.67 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -10131.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -2459.87 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was 0 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -9452.55 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -6482.55 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -6779.55 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -5648.28 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -12804.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -9834.67 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -10131.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -12804.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -9834.67 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -10131.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -12804.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -9834.67 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -10131.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -12804.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -9834.67 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -10131.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -12804.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -9834.67 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -10131.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -9834.67 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -9834.67 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -10131.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -2459.87 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -3.33067e-14 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -9452.55 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -6482.55 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -6779.55 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -5648.28 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -12804.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -9834.67 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -10131.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -12804.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -9834.67 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -10131.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -12804.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -9834.67 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -10131.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -12804.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -9834.67 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -10131.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -12804.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -9834.67 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -10131.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -9834.67 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -9834.67 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -10131.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -2459.87 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -3.33067e-14 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -9452.55 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -6482.55 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -6779.55 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -5648.28 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -12804.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -9834.67 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -10131.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -12804.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -9834.67 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -10131.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -12804.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -9834.67 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -10131.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -12804.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -9834.67 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -10131.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -12804.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -9834.67 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -10131.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -9834.67 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -9834.67 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -10131.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -2459.87 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -3.33067e-14 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -9452.55 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -6482.55 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -6779.55 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -5648.28 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -12804.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -9834.67 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -10131.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -12804.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -9834.67 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -10131.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -12804.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -9834.67 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -10131.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -12804.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -9834.67 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -10131.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -12804.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -9834.67 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -10131.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -9834.67 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -9834.67 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -10131.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -2459.87 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -3.33067e-14 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -9452.55 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -6482.55 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -6779.55 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -5648.28 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -12804.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -9834.67 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -10131.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -12804.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -9834.67 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -10131.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -12804.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -9834.67 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -10131.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -12804.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -9834.67 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -10131.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -12804.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -9834.67 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -10131.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -9834.67 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -9834.67 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -10131.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -2459.87 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -3.33067e-14 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -9452.55 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -6482.55 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -6779.55 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -5648.28 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -12804.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -9834.67 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -10131.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -12804.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -9834.67 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -10131.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -12804.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -9834.67 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -10131.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -12804.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -9834.67 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -10131.7 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -110.08 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -69.4545 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -146.255 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -69.4545 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -31.0545 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -11.8545 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -2.25454 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -7.05454 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -2.25454 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -4.65454 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -2.25454 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -1.05454 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -0.454543 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -0.154543 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -0.00454264 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -0.0795426 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -0.00454264 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -0.0420426 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -0.00454264 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -146.681 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -26.6806 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -86.6806 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -26.6806 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -56.6806 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -26.6806 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -11.6806 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -4.18057 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -0.43057 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -2.30557 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -0.43057 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -1.36807 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -0.43057 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -0.89932 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -0.43057 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -0.196195 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -0.0790075 should be > 0 LOG_ASSERT | debug | Model error: Argument of log(hvac.cooCoi.dryWetCalcs.TAirInDewPoi) was -0.0204138 should be > 0 LOG_ASSERT | debug | Solving non-linear system 17325 failed at time=59564.569302677. | | | | For more information please use -lv LOG_NLS. error: [fmi2logger] [fmi2Fatal] ASHRAE2006/logStatusFatal: fmi2DoStep: ##CVODE## -8 error occurred at time = 59532.7424920687. error: [fmi2logger] [fmi2Fatal] ASHRAE2006/logStatusFatal: fmi2DoStep: CVODE integrator step failed. error: [stepUntil] fmi2_doStep failed for FMU "ASHRAE2006.root.ASHRAE2006" Traceback (most recent call last): File "", line 198, in _run_module_as_main File "", line 88, in _run_code File "/home/hudson/saved_omc/OMSimulator/install/lib/x86_64-linux-gnu/OMSimulator/__main__.py", line 38, in sys.exit(main()) ~~~~^^ File "/home/hudson/saved_omc/OMSimulator/install/lib/x86_64-linux-gnu/OMSimulator/cli.py", line 309, in main handler(args.model, args) ~~~~~~~^^^^^^^^^^^^^^^^^^ File "/home/hudson/saved_omc/OMSimulator/install/lib/x86_64-linux-gnu/OMSimulator/cli.py", line 176, in _runFMU fmu.simulate() ~~~~~~~~~~~~^^ File "/home/hudson/saved_omc/OMSimulator/install/lib/x86_64-linux-gnu/OMSimulator/fmu.py", line 906, in simulate raise RuntimeError(f"Failed to simulate model: {status}") RuntimeError: Failed to simulate model: Status.error info: 0 warnings info: 3 errors