Environment - simulationEnvironment:
startTime=0
stopTime=40
tolerance=1e-06
numberOfIntervals=1000
stepSize=0.04
Regular simulation: ./PowerGrids_dev_PowerGrids.Examples.IEEE14bus.IEEE14busLoad2Variation  -abortSlowSimulation -alarm=480  -emit_protected -lv LOG_STATS
LOG_STDOUT        | info    | Using sparse solver kinsol for nonlinear system 20 (1949),
|                 | |       | because density of 0.09 remains under threshold of 0.10.
LOG_STDOUT        | info    | Using sparse solver kinsol for nonlinear system 21 (2539),
|                 | |       | because density of 0.01 remains under threshold of 0.10.
LOG_STDOUT        | info    | Using sparse solver kinsol for nonlinear system 43 (7138),
|                 | |       | because density of 0.01 remains under threshold of 0.10.
LOG_STDOUT        | info    | The maximum density for using sparse solvers can be specified
|                 | |       | using the runtime flag '<-nlssMaxDensity=value>'.
LOG_STDOUT        | warning | Internal Numerical Jacobians without coloring are currently not supported by IDA with KLU. Colored numerical Jacobian will be used.
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/PowerGrids 2.0.0-develop/Electrical/Buses/ReferenceBus.mo:56:3-58:100:writable]
|                 | |       | The following assertion has been violated during initialization at time 0.000000
|                 | |       | ((1e-8 * abs(bus1.QSlack) < 0.01)) --> "The reactive power flowing into or out of the reference bus is above 0.01 pu.
|                 | |       | You probably need a better setup of excitation voltages, or you can set setPhaseOnly = true on the reference bus.
|                 | |       | Please check the documentation of ReferenceBus for further reference"
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/PowerGrids 2.0.0-develop/Electrical/Buses/ReferenceBus.mo:53:3-55:100:writable]
|                 | |       | The following assertion has been violated during initialization at time 0.000000
|                 | |       | ((1e-8 * abs(bus1.PSlack) < 0.01)) --> "The active power flowing into or out of the reference bus is above 0.01 pu.
|                 | |       | You probably need a better balancing of the active power generators in the system.
|                 | |       | Please check the documentation of ReferenceBus for further reference"
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/PowerGrids 2.0.0-develop/Electrical/BaseClasses/SolutionChecking.mo:35:5-35:162:writable]
|                 | |       | The following assertion has been violated during initialization at time 0.000000
|                 | |       | ((bus1.IPuCheck < bus1.IPuMax)) --> "Current too high (IPu=7.95425 > 2.5), check if the numerical solution is valid"
LOG_SUCCESS       | info    | The initialization finished successfully with 3 homotopy steps.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/PowerGrids 2.0.0-develop/Electrical/BaseClasses/SolutionChecking.mo:33:5-33:162:writable]
|                 | |       | The following assertion has been violated at time 26.215412
|                 | |       | ((bus1.VPuCheck < bus1.VPuMax)) --> "Voltage too high (VPu=1.93857 > 1.3), check if the numerical solution is valid"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/PowerGrids 2.0.0-develop/Electrical/BaseClasses/SolutionChecking.mo:33:5-33:162:writable]
|                 | |       | The following assertion has been violated at time 26.215412
|                 | |       | ((bus2.VPuCheck < bus2.VPuMax)) --> "Voltage too high (VPu=1.35817 > 1.3), check if the numerical solution is valid"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/PowerGrids 2.0.0-develop/Electrical/BaseClasses/SolutionChecking.mo:33:5-33:162:writable]
|                 | |       | The following assertion has been violated at time 26.215412
|                 | |       | ((bus5.VPuCheck < bus5.VPuMax)) --> "Voltage too high (VPu=1.3105 > 1.3), check if the numerical solution is valid"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/PowerGrids 2.0.0-develop/Electrical/BaseClasses/SolutionChecking.mo:33:5-33:162:writable]
|                 | |       | The following assertion has been violated at time 26.215412
|                 | |       | ((busGEN1.VPuCheck < busGEN1.VPuMax)) --> "Voltage too high (VPu=2.00227 > 1.3), check if the numerical solution is valid"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/PowerGrids 2.0.0-develop/Electrical/BaseClasses/SolutionChecking.mo:33:5-33:162:writable]
|                 | |       | The following assertion has been violated at time 26.215412
|                 | |       | ((Load2.VPuCheck < Load2.VPuMax)) --> "Voltage too high (VPu=1.35817 > 1.3), check if the numerical solution is valid"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/PowerGrids 2.0.0-develop/Electrical/BaseClasses/SolutionChecking.mo:33:5-33:162:writable]
|                 | |       | The following assertion has been violated at time 26.215412
|                 | |       | ((Load5.VPuCheck < Load5.VPuMax)) --> "Voltage too high (VPu=1.3105 > 1.3), check if the numerical solution is valid"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/PowerGrids 2.0.0-develop/Electrical/BaseClasses/SolutionChecking.mo:33:5-33:162:writable]
|                 | |       | The following assertion has been violated at time 26.215412
|                 | |       | ((GEN1.AVR.VcPu < GEN1.GEN.VPuMax)) --> "Voltage too high (VPu=2.00227 > 1.3), check if the numerical solution is valid"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/PowerGrids 2.0.0-develop/Electrical/BaseClasses/SolutionChecking.mo:33:5-33:162:writable]
|                 | |       | The following assertion has been violated at time 33.903992
|                 | |       | ((bus4.VPuCheck < bus4.VPuMax)) --> "Voltage too high (VPu=1.75557 > 1.3), check if the numerical solution is valid"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/PowerGrids 2.0.0-develop/Electrical/BaseClasses/SolutionChecking.mo:33:5-33:162:writable]
|                 | |       | The following assertion has been violated at time 33.903992
|                 | |       | ((bus7.VPuCheck < bus7.VPuMax)) --> "Voltage too high (VPu=1.43742 > 1.3), check if the numerical solution is valid"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/PowerGrids 2.0.0-develop/Electrical/BaseClasses/SolutionChecking.mo:33:5-33:162:writable]
|                 | |       | The following assertion has been violated at time 33.903992
|                 | |       | ((bus9.VPuCheck < bus9.VPuMax)) --> "Voltage too high (VPu=1.44561 > 1.3), check if the numerical solution is valid"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/PowerGrids 2.0.0-develop/Electrical/BaseClasses/SolutionChecking.mo:33:5-33:162:writable]
|                 | |       | The following assertion has been violated at time 33.903992
|                 | |       | ((bus10.VPuCheck < bus10.VPuMax)) --> "Voltage too high (VPu=1.40961 > 1.3), check if the numerical solution is valid"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/PowerGrids 2.0.0-develop/Electrical/BaseClasses/SolutionChecking.mo:33:5-33:162:writable]
|                 | |       | The following assertion has been violated at time 33.903992
|                 | |       | ((bus11.VPuCheck < bus11.VPuMax)) --> "Voltage too high (VPu=1.3511 > 1.3), check if the numerical solution is valid"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/PowerGrids 2.0.0-develop/Electrical/BaseClasses/SolutionChecking.mo:33:5-33:162:writable]
|                 | |       | The following assertion has been violated at time 33.903992
|                 | |       | ((bus14.VPuCheck < bus14.VPuMax)) --> "Voltage too high (VPu=1.35817 > 1.3), check if the numerical solution is valid"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/PowerGrids 2.0.0-develop/Electrical/BaseClasses/SolutionChecking.mo:33:5-33:162:writable]
|                 | |       | The following assertion has been violated at time 33.903992
|                 | |       | ((busGEN2.VPuCheck < busGEN2.VPuMax)) --> "Voltage too high (VPu=2.33594 > 1.3), check if the numerical solution is valid"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/PowerGrids 2.0.0-develop/Electrical/BaseClasses/SolutionChecking.mo:33:5-33:162:writable]
|                 | |       | The following assertion has been violated at time 33.903992
|                 | |       | ((Load4.VPuCheck < Load4.VPuMax)) --> "Voltage too high (VPu=1.75557 > 1.3), check if the numerical solution is valid"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/PowerGrids 2.0.0-develop/Electrical/BaseClasses/SolutionChecking.mo:33:5-33:162:writable]
|                 | |       | The following assertion has been violated at time 33.903992
|                 | |       | ((Load9.VPuCheck < Load9.VPuMax)) --> "Voltage too high (VPu=1.44561 > 1.3), check if the numerical solution is valid"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/PowerGrids 2.0.0-develop/Electrical/BaseClasses/SolutionChecking.mo:33:5-33:162:writable]
|                 | |       | The following assertion has been violated at time 33.903992
|                 | |       | ((Load10.VPuCheck < Load10.VPuMax)) --> "Voltage too high (VPu=1.40961 > 1.3), check if the numerical solution is valid"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/PowerGrids 2.0.0-develop/Electrical/BaseClasses/SolutionChecking.mo:33:5-33:162:writable]
|                 | |       | The following assertion has been violated at time 33.903992
|                 | |       | ((Load11.VPuCheck < Load11.VPuMax)) --> "Voltage too high (VPu=1.3511 > 1.3), check if the numerical solution is valid"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/PowerGrids 2.0.0-develop/Electrical/BaseClasses/SolutionChecking.mo:33:5-33:162:writable]
|                 | |       | The following assertion has been violated at time 33.903992
|                 | |       | ((Load14.VPuCheck < Load14.VPuMax)) --> "Voltage too high (VPu=1.35817 > 1.3), check if the numerical solution is valid"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/PowerGrids 2.0.0-develop/Electrical/BaseClasses/SolutionChecking.mo:33:5-33:162:writable]
|                 | |       | The following assertion has been violated at time 33.903992
|                 | |       | ((Cbank9.VPuCheck < Cbank9.VPuMax)) --> "Voltage too high (VPu=1.44561 > 1.3), check if the numerical solution is valid"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/PowerGrids 2.0.0-develop/Electrical/BaseClasses/SolutionChecking.mo:33:5-33:162:writable]
|                 | |       | The following assertion has been violated at time 33.903992
|                 | |       | ((GEN2.AVR.VcPu < GEN2.GEN.VPuMax)) --> "Voltage too high (VPu=2.33594 > 1.3), check if the numerical solution is valid"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/PowerGrids 2.0.0-develop/Electrical/BaseClasses/SolutionChecking.mo:35:5-35:162:writable]
|                 | |       | The following assertion has been violated at time 33.903992
|                 | |       | ((GEN6.GEN.IPuCheck < GEN6.GEN.IPuMax)) --> "Current too high (IPu=3.80916 > 2.5), check if the numerical solution is valid"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/PowerGrids 2.0.0-develop/Electrical/BaseClasses/SolutionChecking.mo:33:5-33:162:writable]
|                 | |       | The following assertion has been violated at time 36.889839
|                 | |       | ((bus3.VPuCheck < bus3.VPuMax)) --> "Voltage too high (VPu=1.36581 > 1.3), check if the numerical solution is valid"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/PowerGrids 2.0.0-develop/Electrical/BaseClasses/SolutionChecking.mo:33:5-33:162:writable]
|                 | |       | The following assertion has been violated at time 36.889839
|                 | |       | ((bus6.VPuCheck < bus6.VPuMax)) --> "Voltage too high (VPu=2.3938 > 1.3), check if the numerical solution is valid"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/PowerGrids 2.0.0-develop/Electrical/BaseClasses/SolutionChecking.mo:33:5-33:162:writable]
|                 | |       | The following assertion has been violated at time 36.889839
|                 | |       | ((bus12.VPuCheck < bus12.VPuMax)) --> "Voltage too high (VPu=2.33195 > 1.3), check if the numerical solution is valid"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/PowerGrids 2.0.0-develop/Electrical/BaseClasses/SolutionChecking.mo:33:5-33:162:writable]
|                 | |       | The following assertion has been violated at time 36.889839
|                 | |       | ((bus13.VPuCheck < bus13.VPuMax)) --> "Voltage too high (VPu=2.29485 > 1.3), check if the numerical solution is valid"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/PowerGrids 2.0.0-develop/Electrical/BaseClasses/SolutionChecking.mo:33:5-33:162:writable]
|                 | |       | The following assertion has been violated at time 36.889839
|                 | |       | ((busGEN3.VPuCheck < busGEN3.VPuMax)) --> "Voltage too high (VPu=1.30454 > 1.3), check if the numerical solution is valid"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/PowerGrids 2.0.0-develop/Electrical/BaseClasses/SolutionChecking.mo:33:5-33:162:writable]
|                 | |       | The following assertion has been violated at time 36.889839
|                 | |       | ((Load3.VPuCheck < Load3.VPuMax)) --> "Voltage too high (VPu=1.36581 > 1.3), check if the numerical solution is valid"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/PowerGrids 2.0.0-develop/Electrical/BaseClasses/SolutionChecking.mo:33:5-33:162:writable]
|                 | |       | The following assertion has been violated at time 36.889839
|                 | |       | ((Load6.VPuCheck < Load6.VPuMax)) --> "Voltage too high (VPu=2.3938 > 1.3), check if the numerical solution is valid"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/PowerGrids 2.0.0-develop/Electrical/BaseClasses/SolutionChecking.mo:33:5-33:162:writable]
|                 | |       | The following assertion has been violated at time 36.889839
|                 | |       | ((Load12.VPuCheck < Load12.VPuMax)) --> "Voltage too high (VPu=2.33195 > 1.3), check if the numerical solution is valid"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/PowerGrids 2.0.0-develop/Electrical/BaseClasses/SolutionChecking.mo:33:5-33:162:writable]
|                 | |       | The following assertion has been violated at time 36.889839
|                 | |       | ((Load13.VPuCheck < Load13.VPuMax)) --> "Voltage too high (VPu=2.29485 > 1.3), check if the numerical solution is valid"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/PowerGrids 2.0.0-develop/Electrical/BaseClasses/SolutionChecking.mo:33:5-33:162:writable]
|                 | |       | The following assertion has been violated at time 36.889839
|                 | |       | ((GEN3.AVR.VcPu < GEN3.GEN.VPuMax)) --> "Voltage too high (VPu=1.30454 > 1.3), check if the numerical solution is valid"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/PowerGrids 2.0.0-develop/Electrical/BaseClasses/SolutionChecking.mo:33:5-33:162:writable]
|                 | |       | The following assertion has been violated at time 36.889839
|                 | |       | ((GEN6.AVR.VcPu < GEN6.GEN.VPuMax)) --> "Voltage too high (VPu=2.3938 > 1.3), check if the numerical solution is valid"
LOG_STATS         | info    | ### STATISTICS ###
|                 | |       | | timer
|                 | |       | | |     0.102113s          reading init.xml
|                 | |       | | |    0.0102116s          reading info.xml
|                 | |       | | |     0.198695s [ 46.6%] pre-initialization
|                 | |       | | |   0.00396894s [  0.9%] initialization
|                 | |       | | |  0.000220734s [  0.1%] steps
|                 | |       | | |     0.116574s [ 27.3%] solver (excl. callbacks)
|                 | |       | | |   0.00801459s [  1.9%] creating output-file
|                 | |       | | |    0.0131853s [  3.1%] event-handling
|                 | |       | | |    0.0102314s [  2.4%] overhead
|                 | |       | | |     0.075891s [ 17.8%] simulation
|                 | |       | | |     0.426781s [100.0%] total
|                 | |       | | events
|                 | |       | | |     7 state events
|                 | |       | | |     0 time events
|                 | |       | | solver: ida
|                 | |       | | |  2170 steps taken
|                 | |       | | |  3514 calls of functionODE
|                 | |       | | |   130 evaluations of jacobian
|                 | |       | | |    13 error test failures
|                 | |       | | |     0 convergence test failures
|                 | |       | | | 0.0252321s time of jacobian evaluation
LOG_SUCCESS       | info    | The simulation finished successfully.