Running: ./testmodel.py --libraries=/home/hudson/saved_omc/libraries/.openmodelica/libraries --ompython_omhome=/usr ThermoSysPro_ThermoSysPro.Examples.Book.SimpleExamples.Volume.TestStaticDrum3.conf.json
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/package.mo", uses=false) [Timeout 180]
"Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/package.mo): time 0.8435/0.8435, allocations: 153.8 MB / 173.4 MB, free: 4.922 MB / 142.1 MB
"
[Timeout remaining time 179]
Using package ThermoSysPro with version 4.1 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/package.mo)
Running command: translateModel(ThermoSysPro.Examples.Book.SimpleExamples.Volume.TestStaticDrum3,tolerance=1e-06,outputFormat="empty",numberOfIntervals=2500,variableFilter="",fileNamePrefix="ThermoSysPro_ThermoSysPro.Examples.Book.SimpleExamples.Volume.TestStaticDrum3")
translateModel(ThermoSysPro.Examples.Book.SimpleExamples.Volume.TestStaticDrum3,tolerance=1e-06,outputFormat="empty",numberOfIntervals=2500,variableFilter="",fileNamePrefix="ThermoSysPro_ThermoSysPro.Examples.Book.SimpleExamples.Volume.TestStaticDrum3") [Timeout 660]
"Notification: Performance of FrontEnd - loaded program: time 0.0005581/0.0005581, allocations: 11.98 kB / 251 MB, free: 4.012 MB / 206.1 MB
Notification: Performance of FrontEnd - Absyn->SCode: time 0.1912/0.1918, allocations: 33.37 MB / 284.4 MB, free: 2.133 MB / 222.1 MB
Notification: Automatically loaded package Complex 4.1.0 due to uses annotation from Modelica.
Notification: Automatically loaded package ModelicaServices 4.1.0 due to uses annotation from Modelica.
Notification: Automatically loaded package Modelica 4.1.0 due to usage.
Notification: Performance of NFInst.instantiate(ThermoSysPro.Examples.Book.SimpleExamples.Volume.TestStaticDrum3): time 1.942/2.134, allocations: 311.6 MB / 0.5821 GB, free: 15.91 MB / 478.1 MB
Notification: Performance of NFInst.instExpressions: time 0.2402/2.374, allocations: 193.2 MB / 0.7708 GB, free: 15.69 MB / 0.6387 GB
Notification: Performance of NFInst.updateImplicitVariability: time 0.001607/2.376, allocations: 11.94 kB / 0.7708 GB, free: 15.68 MB / 0.6387 GB
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Junctions/StaticDrum.mo:11:3-13:24:writable] Warning: Connector Ce_eva is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Junctions/StaticDrum.mo:14:3-16:24:writable] Warning: Connector Ce_eco is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Junctions/StaticDrum.mo:17:3-18:82:writable] Warning: Connector Cs_sup is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Junctions/StaticDrum.mo:19:3-21:17:writable] Warning: Connector Cs_eva is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Junctions/StaticDrum.mo:22:3-23:82:writable] Warning: Connector Cs_sur is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Junctions/StaticDrum.mo:24:3-26:17:writable] Warning: Connector Cs_purg is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Junctions/StaticDrum.mo:27:3-29:17:writable] Warning: Connector Ce_steam is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Junctions/StaticDrum.mo:30:3-32:17:writable] Warning: Connector Ce_sup is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/SingularPressureLoss.mo:25:3-27:16:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/SingularPressureLoss.mo:28:3-29:52:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/SingularPressureLoss.mo:25:3-27:16:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/SingularPressureLoss.mo:28:3-29:52:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/BoundaryConditions/SinkQ.mo:24:3-26:16:writable] Warning: Connector C is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/BoundaryConditions/SourcePQ.mo:29:3-30:52:writable] Warning: Connector C is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/Thermal/BoundaryConditions/HeatSink.mo:11:3-13:67:writable] Warning: Connector C is not balanced: The number of potential variables (0) is not equal to the number of flow variables (1).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/SingularPressureLoss.mo:25:3-27:16:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/SingularPressureLoss.mo:28:3-29:52:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/BoundaryConditions/Sink.mo:17:3-19:16:writable] Warning: Connector C is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/DynamicTwoPhaseFlowPipe.mo:184:3-185:48:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/HeatExchangers/DynamicTwoPhaseFlowPipe.mo:188:3-189:46:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/LumpedStraightPipe.mo:49:3-50:42:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/LumpedStraightPipe.mo:51:3-53:37:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:25:3-27:42:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:28:3-30:37:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:31:3-33:37:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/Volumes/VolumeA.mo:38:3-40:43:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
Notification: Performance of NFTyping.typeComponents: time 0.001099/2.377, allocations: 365.7 kB / 0.7711 GB, free: 15.32 MB / 0.6387 GB
Notification: Performance of NFTyping.typeBindings: time 0.001681/2.379, allocations: 0.7651 MB / 0.7719 GB, free: 14.55 MB / 0.6387 GB
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/Properties/WaterSteam/IF97_packages.mo:783:9-783:27:writable] Warning: cv was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/Properties/WaterSteam/IF97_packages.mo:850:9-850:27:writable] Warning: cv was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/Properties/WaterSteam/IF97_packages.mo:1088:9-1088:27:writable] Warning: cv was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/Properties/WaterSteamSimple/prop4_Ph.mo:69:3-69:60:writable] Warning: dh1satp was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/Properties/WaterSteamSimple/prop4_Ph.mo:69:3-69:60:writable] Warning: dh2satp was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/Properties/WaterSteamSimple/prop4_Ph_der.mo:167:3-170:49:writable] Warning: du1satp_der was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/Properties/WaterSteamSimple/prop4_Ph_der.mo:167:3-170:49:writable] Warning: du2satp_der was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed.
Notification: Performance of NFTyping.typeClassSections: time 0.03877/2.417, allocations: 12.56 MB / 0.7841 GB, free: 2 MB / 0.6387 GB
Notification: Performance of NFFlatten.flatten: time 0.01096/2.428, allocations: 9.219 MB / 0.7931 GB, free: 8.762 MB / 0.6544 GB
Notification: Performance of NFFlatten.resolveConnections: time 0.004759/2.433, allocations: 2.616 MB / 0.7957 GB, free: 6.121 MB / 0.6544 GB
Notification: Performance of NFEvalConstants.evaluate: time 0.005021/2.438, allocations: 3.165 MB / 0.7988 GB, free: 2.949 MB / 0.6544 GB
Notification: Performance of NFSimplifyModel.simplify: time 0.007292/2.445, allocations: 3.518 MB / 0.8022 GB, free: 15.42 MB / 0.67 GB
Notification: Performance of NFPackage.collectConstants: time 0.003202/2.449, allocations: 0.5391 MB / 0.8028 GB, free: 14.88 MB / 0.67 GB
Notification: Performance of NFFlatten.collectFunctions: time 0.04208/2.491, allocations: 18.76 MB / 0.8211 GB, free: 12.11 MB / 0.6856 GB
Notification: Performance of NFScalarize.scalarize: time 0.003662/2.494, allocations: 2.026 MB / 0.823 GB, free: 10.07 MB / 0.6856 GB
Notification: Performance of NFVerifyModel.verify: time 0.006365/2.501, allocations: 2.848 MB / 0.8258 GB, free: 7.211 MB / 0.6856 GB
Notification: Performance of NFConvertDAE.convert: time 0.4097/2.91, allocations: 15.81 MB / 0.8413 GB, free: 37.54 MB / 0.6856 GB
Notification: Performance of FrontEnd - DAE generated: time 8.626e-06/2.91, allocations: 2.156 kB / 0.8413 GB, free: 37.54 MB / 0.6856 GB
Notification: Performance of FrontEnd: time 2.615e-06/2.91, allocations: 0 / 0.8413 GB, free: 37.54 MB / 0.6856 GB
Notification: Performance of Transformations before backend: time 0.0003337/2.911, allocations: 2.094 kB / 0.8413 GB, free: 37.54 MB / 0.6856 GB
Notification: Model statistics after passing the front-end and creating the data structures used by the back-end:
 * Number of equations: 1367
 * Number of variables: 1367
Notification: Performance of Generate backend data structure: time 0.04389/2.955, allocations: 8.558 MB / 0.8496 GB, free: 35.29 MB / 0.6856 GB
Notification: Performance of prepare preOptimizeDAE: time 5.357e-05/2.955, allocations: 11.78 kB / 0.8496 GB, free: 35.29 MB / 0.6856 GB
Notification: Performance of preOpt normalInlineFunction (simulation): time 0.005805/2.961, allocations: 0.8433 MB / 0.8505 GB, free: 35.04 MB / 0.6856 GB
Notification: Performance of preOpt evaluateParameters (simulation): time 0.00539/2.966, allocations: 1.768 MB / 0.8522 GB, free: 34.65 MB / 0.6856 GB
Notification: Performance of preOpt simplifyIfEquations (simulation): time 0.002231/2.968, allocations: 3.105 MB / 0.8552 GB, free: 31.7 MB / 0.6856 GB
Notification: Performance of preOpt expandDerOperator (simulation): time 0.001232/2.969, allocations: 337.9 kB / 0.8555 GB, free: 31.7 MB / 0.6856 GB
Notification: Performance of preOpt clockPartitioning (simulation): time 0.0253/2.995, allocations: 9.385 MB / 0.8647 GB, free: 31.23 MB / 0.6856 GB
Notification: Performance of preOpt findStateOrder (simulation): time 9.731e-05/2.995, allocations: 5.719 kB / 0.8647 GB, free: 31.23 MB / 0.6856 GB
Notification: Performance of preOpt replaceEdgeChange (simulation): time 0.001003/2.996, allocations: 130.1 kB / 0.8648 GB, free: 31.23 MB / 0.6856 GB
Notification: Performance of preOpt inlineArrayEqn (simulation): time 0.0001206/2.996, allocations: 156.2 kB / 0.865 GB, free: 31.23 MB / 0.6856 GB
Notification: Performance of preOpt removeEqualRHS (simulation): time 0.03397/3.03, allocations: 12.11 MB / 0.8768 GB, free: 31.2 MB / 0.6856 GB
Warning: The model contains alias variables with redundant start and/or conflicting nominal values. It is recommended to resolve the conflicts, because otherwise the system could be hard to solve. To print the conflicting alias sets and the chosen candidates please use -d=aliasConflicts.
Notification: Performance of preOpt removeSimpleEquations (simulation): time 0.06241/3.092, allocations: 29.57 MB / 0.9057 GB, free: 21.05 MB / 0.6856 GB
Notification: Performance of preOpt comSubExp (simulation): time 0.02517/3.117, allocations: 9.243 MB / 0.9147 GB, free: 20.81 MB / 0.6856 GB
Notification: Performance of preOpt resolveLoops (simulation): time 0.01751/3.135, allocations: 6.808 MB / 0.9214 GB, free: 17.41 MB / 0.6856 GB
Notification: Performance of preOpt evalFunc (simulation): time 0.2983/3.433, allocations: 89.54 MB / 1.009 GB, free: 9.465 MB / 0.7637 GB
Notification: Performance of preOpt encapsulateWhenConditions (simulation): time 0.0001565/3.433, allocations: 92.19 kB / 1.009 GB, free: 9.363 MB / 0.7637 GB
Notification: Performance of pre-optimization done (n=1061): time 1.099e-05/3.433, allocations: 0 / 1.009 GB, free: 9.363 MB / 0.7637 GB
Notification: Performance of matching and sorting (n=1061): time 0.07503/3.509, allocations: 21.88 MB / 1.03 GB, free: 3.363 MB / 0.7794 GB
Notification: Performance of inlineWhenForInitialization (initialization): time 0.0001234/3.509, allocations: 134.2 kB / 1.03 GB, free: 3.211 MB / 0.7794 GB
Notification: Performance of selectInitializationVariablesDAE (initialization): time 0.001641/3.51, allocations: 0.8996 MB / 1.031 GB, free: 2.305 MB / 0.7794 GB
Notification: Performance of collectPreVariables (initialization): time 0.002463/3.513, allocations: 113.7 kB / 1.031 GB, free: 2.188 MB / 0.7794 GB
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro master/WaterSteam/PressureLosses/LumpedStraightPipe.mo:6:3-7:71:writable] Warning: The parameter lumpedStraightPipe.lambda has fixed = false and a binding equation lumpedStraightPipe.lambda = 0.03, which is probably redundant.
Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding.
Notification: Performance of collectInitialEqns (initialization): time 0.0007122/3.513, allocations: 0.6621 MB / 1.032 GB, free: 1.523 MB / 0.7794 GB
Notification: Performance of collectInitialBindings (initialization): time 0.00641/3.52, allocations: 3.669 MB / 1.036 GB, free: 13.9 MB / 0.795 GB
Notification: Performance of simplifyInitialFunctions (initialization): time 0.008094/3.528, allocations: 1.311 MB / 1.037 GB, free: 12.57 MB / 0.795 GB
Notification: Performance of setup shared object (initialization): time 0.0001472/3.528, allocations: 305.1 kB / 1.037 GB, free: 12.27 MB / 0.795 GB
Notification: Performance of preBalanceInitialSystem (initialization): time 0.01904/3.547, allocations: 6.301 MB / 1.043 GB, free: 5.961 MB / 0.795 GB
Notification: Performance of partitionIndependentBlocks (initialization): time 0.01982/3.567, allocations: 7.161 MB / 1.05 GB, free: 14.61 MB / 0.8106 GB
Notification: It was not possible to check the given initialization system for consistency symbolically, because the relevant equations are part of an algebraic loop. This is not supported yet.
Notification: Performance of analyzeInitialSystem (initialization): time 0.1724/3.739, allocations: 41.43 MB / 1.091 GB, free: 5.098 MB / 0.8419 GB
Notification: Performance of solveInitialSystemEqSystem (initialization): time 2.934e-05/3.739, allocations: 8 kB / 1.091 GB, free: 5.09 MB / 0.8419 GB
Notification: Performance of matching and sorting (n=1150) (initialization): time 0.05988/3.799, allocations: 17.81 MB / 1.108 GB, free: 3.258 MB / 0.8575 GB
Notification: Performance of prepare postOptimizeDAE: time 4.995e-05/3.799, allocations: 15.94 kB / 1.108 GB, free: 3.242 MB / 0.8575 GB
Notification: Performance of postOpt simplifyComplexFunction (initialization): time 0.0001226/3.799, allocations: 38.17 kB / 1.108 GB, free: 3.207 MB / 0.8575 GB
Notification: Performance of postOpt tearingSystem (initialization): time 0.05826/3.858, allocations: 19.76 MB / 1.128 GB, free: 15.36 MB / 0.8887 GB
Notification: Performance of postOpt solveSimpleEquations (initialization): time 0.008132/3.866, allocations: 1.328 MB / 1.129 GB, free: 14.07 MB / 0.8887 GB
Notification: Performance of postOpt calculateStrongComponentJacobians (initialization): time 0.2744/4.14, allocations: 14.64 MB / 1.143 GB, free: 487.9 MB / 0.8887 GB
Notification: Performance of postOpt simplifyAllExpressions (initialization): time 0.01082/4.151, allocations: 1.53 MB / 1.145 GB, free: 487.9 MB / 0.8887 GB
Notification: Performance of postOpt collapseArrayExpressions (initialization): time 0.001802/4.153, allocations: 283.9 kB / 1.145 GB, free: 487.9 MB / 0.8887 GB
Warning: The initial conditions are over specified. The following 1 initial equations are redundant, so they are removed from the initialization system:
         $DER.volumeA.h = 0.0.
Notification: Model statistics after passing the back-end for initialization:
 * Number of independent subsystems: 56
 * Number of states: 0 ()
 * Number of discrete variables: 30 (volumeA.Cs2.b,volumeA.Cs1.b,volumeA.Ce2.a,volumeA.Ce1.a,lumpedStraightPipe.C2.b,lumpedStraightPipe.C1.a,dynamicTwoPhaseFlowPipe.C2.b,dynamicTwoPhaseFlowPipe.C1.a,sink.C.a,singularPressureLossVALI3.C2.b,singularPressureLossVALI3.C1.a,sourcePQ.C.b,sinkQ.C.a,singularPressureLossVALI2.C2.b,singularPressureLossVALI2.C1.a,singularPressureLossVALI1.C2.b,singularPressureLossVALI1.C1.a,StaticDrumTh1.Ce_sup.a,StaticDrumTh1.Ce_steam.a,StaticDrumTh1.Cs_purg.b,StaticDrumTh1.Cs_sur.b,StaticDrumTh1.Cs_eva.b,StaticDrumTh1.Cs_sup.b,StaticDrumTh1.Ce_eco.a,StaticDrumTh1.Ce_eva.a,volumeA.Cs2.a,volumeA.Ce2.b,StaticDrumTh1.Cs_sup.a,StaticDrumTh1.Ce_sup.b,StaticDrumTh1.Ce_steam.b)
 * Number of discrete states: 0 ()
 * Number of clocked states: 0 ()
 * Top-level inputs: 0
Notification: Strong component statistics for initialization (367):
 * Single equations (assignments): 350
 * Array equations: 0
 * Algorithm blocks: 0
 * Record equations: 13
 * When equations: 0
 * If-equations: 0
 * Equation systems (not torn): 0
 * Torn equation systems: 4
 * Mixed (continuous/discrete) equation systems: 0
Notification: Torn system details for strict tearing set:
 * Linear torn systems (#iteration vars, #inner vars, density): 0 systems
 * Non-linear torn systems (#iteration vars, #inner vars): 4 systems
   {(1,3), (24,211), (1,3), (1,5)}
Notification: Performance of prepare postOptimizeDAE: time 0.003539/4.156, allocations: 1.155 MB / 1.146 GB, free: 487.8 MB / 0.8887 GB
Notification: Performance of postOpt lateInlineFunction (simulation): time 0.001342/4.158, allocations: 392 kB / 1.146 GB, free: 487.6 MB / 0.8887 GB
Notification: Performance of postOpt wrapFunctionCalls (simulation): time 0.04193/4.2, allocations: 18.87 MB / 1.165 GB, free: 484.4 MB / 0.8887 GB
Notification: Performance of postOpt inlineArrayEqn (simulation): time 0.03641/4.236, allocations: 16.3 MB / 1.181 GB, free: 479.4 MB / 0.8887 GB
Notification: Performance of postOpt constantLinearSystem (simulation): time 5.076e-05/4.236, allocations: 0 / 1.181 GB, free: 479.4 MB / 0.8887 GB
Notification: Performance of postOpt simplifysemiLinear (simulation): time 0.0001103/4.236, allocations: 43.78 kB / 1.181 GB, free: 479.3 MB / 0.8887 GB
Notification: Performance of postOpt removeSimpleEquations (simulation): time 0.06335/4.3, allocations: 28.89 MB / 1.209 GB, free: 457.6 MB / 0.8887 GB
Notification: Performance of postOpt simplifyComplexFunction (simulation): time 8.051e-05/4.3, allocations: 19.98 kB / 1.209 GB, free: 457.6 MB / 0.8887 GB
Notification: Performance of postOpt solveSimpleEquations (simulation): time 0.01945/4.319, allocations: 3.546 MB / 1.212 GB, free: 454.1 MB / 0.8887 GB
Notification: Performance of postOpt tearingSystem (simulation): time 0.002948/4.322, allocations: 1.269 MB / 1.214 GB, free: 452.9 MB / 0.8887 GB
Notification: Performance of postOpt inputDerivativesUsed (simulation): time 0.00221/4.324, allocations: 287.4 kB / 1.214 GB, free: 452.6 MB / 0.8887 GB
Notification: Performance of postOpt calculateStrongComponentJacobians (simulation): time 0.01078/4.335, allocations: 17.15 MB / 1.231 GB, free: 434.4 MB / 0.8887 GB
Notification: Performance of postOpt calculateStateSetsJacobians (simulation): time 2.765e-06/4.335, allocations: 4.031 kB / 1.231 GB, free: 434.4 MB / 0.8887 GB
Notification: Performance of postOpt symbolicJacobian (simulation): time 0.05583/4.391, allocations: 25.49 MB / 1.256 GB, free: 408.9 MB / 0.8887 GB
Notification: Performance of postOpt removeConstants (simulation): time 0.005214/4.396, allocations: 1.645 MB / 1.257 GB, free: 407.3 MB / 0.8887 GB
Notification: Performance of postOpt simplifyTimeIndepFuncCalls (simulation): time 0.002102/4.398, allocations: 159.9 kB / 1.257 GB, free: 407.1 MB / 0.8887 GB
Notification: Performance of postOpt simplifyAllExpressions (simulation): time 0.008919/4.407, allocations: 1.057 MB / 1.258 GB, free: 406 MB / 0.8887 GB
Notification: Performance of postOpt findZeroCrossings (simulation): time 0.001794/4.409, allocations: 0.5551 MB / 1.259 GB, free: 405.5 MB / 0.8887 GB
Notification: Performance of postOpt collapseArrayExpressions (simulation): time 0.001487/4.41, allocations: 303.7 kB / 1.259 GB, free: 405.2 MB / 0.8887 GB
Notification: Performance of sorting global known variables: time 0.000808/4.411, allocations: 0.5888 MB / 1.26 GB, free: 404.6 MB / 0.8887 GB
Notification: Performance of sort global known variables: time 1.1e-07/4.411, allocations: 0 / 1.26 GB, free: 404.6 MB / 0.8887 GB
Notification: Performance of remove unused functions: time 0.0124/4.424, allocations: 3.167 MB / 1.263 GB, free: 401.4 MB / 0.8887 GB
Notification: Model statistics after passing the back-end for simulation:
 * Number of independent subsystems: 2
 * Number of states: 32 (dynamicTwoPhaseFlowPipe.P[2],dynamicTwoPhaseFlowPipe.P[3],dynamicTwoPhaseFlowPipe.P[4],dynamicTwoPhaseFlowPipe.P[5],dynamicTwoPhaseFlowPipe.P[6],dynamicTwoPhaseFlowPipe.P[7],dynamicTwoPhaseFlowPipe.P[8],dynamicTwoPhaseFlowPipe.P[9],dynamicTwoPhaseFlowPipe.P[10],dynamicTwoPhaseFlowPipe.P[11],dynamicTwoPhaseFlowPipe.Q[1],dynamicTwoPhaseFlowPipe.Q[2],dynamicTwoPhaseFlowPipe.Q[3],dynamicTwoPhaseFlowPipe.Q[4],dynamicTwoPhaseFlowPipe.Q[5],dynamicTwoPhaseFlowPipe.Q[6],dynamicTwoPhaseFlowPipe.Q[7],dynamicTwoPhaseFlowPipe.Q[8],dynamicTwoPhaseFlowPipe.Q[9],dynamicTwoPhaseFlowPipe.Q[10],dynamicTwoPhaseFlowPipe.Q[11],dynamicTwoPhaseFlowPipe.h[2],dynamicTwoPhaseFlowPipe.h[3],dynamicTwoPhaseFlowPipe.h[4],dynamicTwoPhaseFlowPipe.h[5],dynamicTwoPhaseFlowPipe.h[6],dynamicTwoPhaseFlowPipe.h[7],dynamicTwoPhaseFlowPipe.h[8],dynamicTwoPhaseFlowPipe.h[9],dynamicTwoPhaseFlowPipe.h[10],dynamicTwoPhaseFlowPipe.h[11],volumeA.h)
 * Number of discrete variables: 0 ()
 * Number of discrete states: 0 ()
 * Number of clocked states: 0 ()
 * Top-level inputs: 0
Notification: Strong component statistics for simulation (792):
 * Single equations (assignments): 733
 * Array equations: 0
 * Algorithm blocks: 0
 * Record equations: 45
 * When equations: 0
 * If-equations: 0
 * Equation systems (not torn): 0
 * Torn equation systems: 14
 * Mixed (continuous/discrete) equation systems: 0
Notification: Torn system details for strict tearing set:
 * Linear torn systems (#iteration vars, #inner vars, density): 10 systems
   {(1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%)}
 * Non-linear torn systems (#iteration vars, #inner vars): 4 systems
   {(1,4), (1,3), (1,3), (1,5)}
Notification: Performance of Backend phase and start with SimCode phase: time 0.009914/4.434, allocations: 2.407 MB / 1.265 GB, free: 399.4 MB / 0.8887 GB
Notification: Performance of simCode: created initialization part: time 0.04686/4.48, allocations: 18.82 MB / 1.284 GB, free: 379.9 MB / 0.8887 GB
Notification: Performance of simCode: created event and clocks part: time 7.124e-06/4.48, allocations: 0 / 1.284 GB, free: 379.9 MB / 0.8887 GB
Notification: Performance of simCode: created simulation system equations: time 0.02327/4.504, allocations: 10.26 MB / 1.294 GB, free: 369.5 MB / 0.8887 GB
Notification: Performance of simCode: created of all other equations (e.g. parameter, nominal, assert, etc): time 0.0132/4.517, allocations: 2.026 MB / 1.296 GB, free: 367.8 MB / 0.8887 GB
Notification: Performance of simCode: created linear, non-linear and system jacobian parts: time 0.05843/4.575, allocations: 22.8 MB / 1.318 GB, free: 345.1 MB / 0.8887 GB
Notification: Performance of simCode: some other stuff during SimCode phase: time 0.002548/4.578, allocations: 3.443 MB / 1.321 GB, free: 341.7 MB / 0.8887 GB
Notification: Performance of simCode: all other stuff during SimCode phase: time 0.00463/4.583, allocations: 0.6393 MB / 1.322 GB, free: 341 MB / 0.8887 GB
Notification: Performance of SimCode: time 7.61e-07/4.583, allocations: 0 / 1.322 GB, free: 341 MB / 0.8887 GB
Notification: Performance of Templates: time 0.2328/4.815, allocations: 288.2 MB / 1.603 GB, free: 53.28 MB / 0.8887 GB
"
[Timeout remaining time 655]
make -j1 -f ThermoSysPro_ThermoSysPro.Examples.Book.SimpleExamples.Volume.TestStaticDrum3.makefile [Timeout 660]
make -j1 -f ThermoSysPro_ThermoSysPro.Examples.Book.SimpleExamples.Volume.TestStaticDrum3.makefile clang++ -std=c++17  -fopenmp=libomp  -Winvalid-pch -O2 -g -DNDEBUG -fPIC   -std=c++11 -DBOOST_ALL_DYN_LINK   -DUSE_DGESV -DUSE_LOGGER -DOMC_BUILD -DUSE_THREAD -DSUNDIALS_MAJOR_VERSION=5 -DSUNDIALS_MINOR_VERSION=4 -DPMC_USE_SUNDIALS -I"." -I"/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/" -I.  -I"." -I"." -I"/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/include/omc/sundials"     -DMEASURETIME_PROFILEBLOCKS -DUSE_LOGGER  -c -o OMCppThermoSysPro_ThermoSysPro.Examples.Book.SimpleExamples.Volume.TestStaticDrum3CalcHelperMain.o OMCppThermoSysPro_ThermoSysPro.Examples.Book.SimpleExamples.Volume.TestStaticDrum3CalcHelperMain.cpp
In file included from OMCppThermoSysPro_ThermoSysPro.Examples.Book.SimpleExamples.Volume.TestStaticDrum3CalcHelperMain.cpp:25:
In file included from ./OMCppThermoSysPro_ThermoSysPro.Examples.Book.SimpleExamples.Volume.TestStaticDrum3AlgLoopMain.cpp:60:
./OMCppThermoSysPro_ThermoSysPro.Examples.Book.SimpleExamples.Volume.TestStaticDrum3Algloop592.cpp:271:3: error: use of undeclared identifier '_dynamicTwoPhaseFlowPipe_P_lsat2_P_P_'
  _dynamicTwoPhaseFlowPipe_P_lsat2_P_P_ = get<0>(tmp636.data).P_;
  ^
./OMCppThermoSysPro_ThermoSysPro.Examples.Book.SimpleExamples.Volume.TestStaticDrum3Algloop592.cpp:272:3: error: use of undeclared identifier '_dynamicTwoPhaseFlowPipe_P_lsat2_P_T_'
  _dynamicTwoPhaseFlowPipe_P_lsat2_P_T_ = get<0>(tmp636.data).T_;
  ^
./OMCppThermoSysPro_ThermoSysPro.Examples.Book.SimpleExamples.Volume.TestStaticDrum3Algloop592.cpp:273:3: error: use of undeclared identifier '_dynamicTwoPhaseFlowPipe_P_lsat2_P_rho_'
  _dynamicTwoPhaseFlowPipe_P_lsat2_P_rho_ = get<0>(tmp636.data).rho_;
  ^
./OMCppThermoSysPro_ThermoSysPro.Examples.Book.SimpleExamples.Volume.TestStaticDrum3Algloop592.cpp:274:3: error: use of undeclared identifier '_dynamicTwoPhaseFlowPipe_P_lsat2_P_h_'
  _dynamicTwoPhaseFlowPipe_P_lsat2_P_h_ = get<0>(tmp636.data).h_;
  ^
./OMCppThermoSysPro_ThermoSysPro.Examples.Book.SimpleExamples.Volume.TestStaticDrum3Algloop592.cpp:275:3: error: use of undeclared identifier '_dynamicTwoPhaseFlowPipe_P_lsat2_P_cp_'
  _dynamicTwoPhaseFlowPipe_P_lsat2_P_cp_ = get<0>(tmp636.data).cp_;
  ^
./OMCppThermoSysPro_ThermoSysPro.Examples.Book.SimpleExamples.Volume.TestStaticDrum3Algloop592.cpp:276:3: error: use of undeclared identifier '_dynamicTwoPhaseFlowPipe_P_lsat2_P_pt_'
  _dynamicTwoPhaseFlowPipe_P_lsat2_P_pt_ = get<0>(tmp636.data).pt_;
  ^
./OMCppThermoSysPro_ThermoSysPro.Examples.Book.SimpleExamples.Volume.TestStaticDrum3Algloop592.cpp:277:3: error: use of undeclared identifier '_dynamicTwoPhaseFlowPipe_P_lsat2_P_cv_'
  _dynamicTwoPhaseFlowPipe_P_lsat2_P_cv_ = get<0>(tmp636.data).cv_;
  ^
./OMCppThermoSysPro_ThermoSysPro.Examples.Book.SimpleExamples.Volume.TestStaticDrum3Algloop592.cpp:278:3: error: use of undeclared identifier '_dynamicTwoPhaseFlowPipe_P_vsat2_P_P_'
  _dynamicTwoPhaseFlowPipe_P_vsat2_P_P_ = get<1>(tmp636.data).P_;
  ^
./OMCppThermoSysPro_ThermoSysPro.Examples.Book.SimpleExamples.Volume.TestStaticDrum3Algloop592.cpp:279:3: error: use of undeclared identifier '_dynamicTwoPhaseFlowPipe_P_vsat2_P_T_'
  _dynamicTwoPhaseFlowPipe_P_vsat2_P_T_ = get<1>(tmp636.data).T_;
  ^
./OMCppThermoSysPro_ThermoSysPro.Examples.Book.SimpleExamples.Volume.TestStaticDrum3Algloop592.cpp:280:3: error: use of undeclared identifier '_dynamicTwoPhaseFlowPipe_P_vsat2_P_rho_'
  _dynamicTwoPhaseFlowPipe_P_vsat2_P_rho_ = get<1>(tmp636.data).rho_;
  ^
./OMCppThermoSysPro_ThermoSysPro.Examples.Book.SimpleExamples.Volume.TestStaticDrum3Algloop592.cpp:281:3: error: use of undeclared identifier '_dynamicTwoPhaseFlowPipe_P_vsat2_P_h_'
  _dynamicTwoPhaseFlowPipe_P_vsat2_P_h_ = get<1>(tmp636.data).h_;
  ^
./OMCppThermoSysPro_ThermoSysPro.Examples.Book.SimpleExamples.Volume.TestStaticDrum3Algloop592.cpp:282:3: error: use of undeclared identifier '_dynamicTwoPhaseFlowPipe_P_vsat2_P_cp_'
  _dynamicTwoPhaseFlowPipe_P_vsat2_P_cp_ = get<1>(tmp636.data).cp_;
  ^
./OMCppThermoSysPro_ThermoSysPro.Examples.Book.SimpleExamples.Volume.TestStaticDrum3Algloop592.cpp:283:3: error: use of undeclared identifier '_dynamicTwoPhaseFlowPipe_P_vsat2_P_pt_'
  _dynamicTwoPhaseFlowPipe_P_vsat2_P_pt_ = get<1>(tmp636.data).pt_;
  ^
./OMCppThermoSysPro_ThermoSysPro.Examples.Book.SimpleExamples.Volume.TestStaticDrum3Algloop592.cpp:284:3: error: use of undeclared identifier '_dynamicTwoPhaseFlowPipe_P_vsat2_P_cv_'
  _dynamicTwoPhaseFlowPipe_P_vsat2_P_cv_ = get<1>(tmp636.data).cv_;
  ^
./OMCppThermoSysPro_ThermoSysPro.Examples.Book.SimpleExamples.Volume.TestStaticDrum3Algloop592.cpp:290:3: error: use of undeclared identifier '_dynamicTwoPhaseFlowPipe_P_lsat2_P_P_'
  _dynamicTwoPhaseFlowPipe_P_lsat2_P_P_ = get<0>(tmp637.data).P_;
  ^
./OMCppThermoSysPro_ThermoSysPro.Examples.Book.SimpleExamples.Volume.TestStaticDrum3Algloop592.cpp:291:3: error: use of undeclared identifier '_dynamicTwoPhaseFlowPipe_P_lsat2_P_T_'
  _dynamicTwoPhaseFlowPipe_P_lsat2_P_T_ = get<0>(tmp637.data).T_;
  ^
./OMCppThermoSysPro_ThermoSysPro.Examples.Book.SimpleExamples.Volume.TestStaticDrum3Algloop592.cpp:292:3: error: use of undeclared identifier '_dynamicTwoPhaseFlowPipe_P_lsat2_P_rho_'
  _dynamicTwoPhaseFlowPipe_P_lsat2_P_rho_ = get<0>(tmp637.data).rho_;
  ^
./OMCppThermoSysPro_ThermoSysPro.Examples.Book.SimpleExamples.Volume.TestStaticDrum3Algloop592.cpp:293:3: error: use of undeclared identifier '_dynamicTwoPhaseFlowPipe_P_lsat2_P_h_'
  _dynamicTwoPhaseFlowPipe_P_lsat2_P_h_ = get<0>(tmp637.data).h_;
  ^
./OMCppThermoSysPro_ThermoSysPro.Examples.Book.SimpleExamples.Volume.TestStaticDrum3Algloop592.cpp:294:3: error: use of undeclared identifier '_dynamicTwoPhaseFlowPipe_P_lsat2_P_cp_'
  _dynamicTwoPhaseFlowPipe_P_lsat2_P_cp_ = get<0>(tmp637.data).cp_;
  ^
fatal error: too many errors emitted, stopping now [-ferror-limit=]
20 errors generated.
make: *** [<builtin>: OMCppThermoSysPro_ThermoSysPro.Examples.Book.SimpleExamples.Volume.TestStaticDrum3CalcHelperMain.o] Error 1
[Calling os._exit(0), Time elapsed: 9.186365451896563]
Failed to read output from testmodel.py, exit status != 0:
5.197199673159048 5.208242974 2.2949008650000002
Calling exit ...
<OMPython.OMCSessionZMQ object at 0x7eff5d3f2ce0>