Running: ./testmodel.py --libraries=/home/hudson/saved_omc/libraries/.openmodelica/libraries --ompython_omhome=/usr BuildingSystems_BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DTriangularWalls.conf.json
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.1.0+maint.om/package.mo", uses=false) [Timeout 180]
"Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.1.0+maint.om/package.mo): time 0.001299/0.001299, allocations: 110.2 kB / 19.69 MB, free: 2.254 MB / 14.72 MB
"
[Timeout remaining time 180]
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.1.0+maint.om/package.mo", uses=false) [Timeout 180]
"Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.1.0+maint.om/package.mo): time 0.001442/0.001442, allocations: 216.6 kB / 23.01 MB, free: 4.566 MB / 14.72 MB
"
[Timeout remaining time 180]
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.1.0+maint.om/package.mo", uses=false) [Timeout 180]
"Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.1.0+maint.om/package.mo): time 1.434/1.434, allocations: 230.6 MB / 256.8 MB, free: 8.004 MB / 206.1 MB
"
[Timeout remaining time 178]
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/NcDataReader2 master/package.mo", uses=false) [Timeout 180]
"Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/NcDataReader2 master/package.mo): time 0.002612/0.002612, allocations: 284.5 kB / 313.5 MB, free: 2.797 MB / 238.1 MB
"
[Timeout remaining time 180]
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/package.mo", uses=false) [Timeout 180]
"Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/package.mo): time 1.243/1.243, allocations: 180.6 MB / 0.5377 GB, free: 12.91 MB / 382.1 MB
"
[Timeout remaining time 179]
Using package BuildingSystems with version 2.0.0-beta (/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/package.mo)
Using package NcDataReader2 with version 2.5.1 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/NcDataReader2 master/package.mo)
Using package Modelica with version 4.1.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.1.0+maint.om/package.mo)
Using package Complex with version 4.1.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.1.0+maint.om/package.mo)
Using package ModelicaServices with version 4.1.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.1.0+maint.om/package.mo)
Running command: translateModel(BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DTriangularWalls,tolerance=1e-06,outputFormat="empty",numberOfIntervals=2500,variableFilter="",fileNamePrefix="BuildingSystems_BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DTriangularWalls")
translateModel(BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DTriangularWalls,tolerance=1e-06,outputFormat="empty",numberOfIntervals=2500,variableFilter="",fileNamePrefix="BuildingSystems_BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DTriangularWalls") [Timeout 660]
"Notification: NcDataReader2 requested package Modelica of version 4.0.0. Modelica 4.1.0 is used instead which states that it is fully compatible without conversion script needed.
Notification: BuildingSystems requested package Modelica of version 4.0.0. Modelica 4.1.0 is used instead which states that it is fully compatible without conversion script needed.
Notification: Performance of FrontEnd - loaded program: time 0.00297/0.00297, allocations: 97.72 kB / 0.7408 GB, free: 28.2 MB / 0.5294 GB
Notification: Performance of FrontEnd - Absyn->SCode: time 0.1649/0.1679, allocations: 95.38 MB / 0.834 GB, free: 8.133 MB / 0.5762 GB
Notification: Performance of NFInst.instantiate(BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DTriangularWalls): time 0.661/0.8289, allocations: 223.3 MB / 1.052 GB, free: 2.809 MB / 0.7169 GB
Notification: Performance of NFInst.instExpressions: time 0.03545/0.8644, allocations: 18.84 MB / 1.07 GB, free: 1.715 MB / 0.7169 GB
Notification: Performance of NFInst.updateImplicitVariability: time 0.01252/0.8769, allocations: 266.5 kB / 1.071 GB, free: 1.711 MB / 0.7169 GB
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/Ambience.mo:52:3-55:54:writable] Warning: Connector toAirPorts is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/Ambience.mo:56:3-59:53:writable] Warning: Connector toSurfacePorts is not balanced: The number of potential variables (6) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Climate/SolarRadiationTransformers/SolarRadiationTransformerGeneral.mo:25:3-27:116:writable] Warning: Connector radiationPort is not balanced: The number of potential variables (5) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/BaseClasses/ZoneTemplateGeneral.mo:63:3-67:55:writable] Warning: Connector toConstructionPorts is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/BaseClasses/RadiationDistribution.mo:13:3-15:72:writable] Warning: Connector toSurfacePorts is not balanced: The number of potential variables (6) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/BaseClasses/SurfaceGeneral.mo:4:3-6:117:writable] Warning: Connector toConstructionPort is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/Surfaces/SurfaceToAir.mo:5:3-7:118:writable] Warning: Connector toAirPort is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/Surfaces/SurfaceToAir.mo:8:3-12:115:writable] Warning: Connector toSurfacesPort is not balanced: The number of potential variables (6) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/Surfaces/SurfacesToAir.mo:9:3-12:23:writable] Warning: Connector toConstructionPorts is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/Surfaces/SurfacesToAir.mo:13:3-16:23:writable] Warning: Connector toSurfacesPorts is not balanced: The number of potential variables (6) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/Surfaces/SurfacesToAir.mo:17:3-19:113:writable] Warning: Connector toAirPorts is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/BaseClasses/AirvolumeGeneral.mo:40:3-41:97:writable] Warning: Connector toSurfacePorts is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/BaseClasses/SurfaceGeneral.mo:4:3-6:117:writable] Warning: Connector toConstructionPort is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/Surfaces/SurfaceToAir.mo:5:3-7:118:writable] Warning: Connector toAirPort is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/Surfaces/SurfaceToAir.mo:8:3-12:115:writable] Warning: Connector toSurfacesPort is not balanced: The number of potential variables (6) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/BaseClasses/SurfaceGeneral.mo:4:3-6:117:writable] Warning: Connector toConstructionPort is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/Surfaces/SurfaceToAir.mo:5:3-7:118:writable] Warning: Connector toAirPort is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/Surfaces/SurfaceToAir.mo:8:3-12:115:writable] Warning: Connector toSurfacesPort is not balanced: The number of potential variables (6) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/BaseClasses/SurfaceGeneral.mo:4:3-6:117:writable] Warning: Connector toConstructionPort is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/Surfaces/SurfaceToAir.mo:5:3-7:118:writable] Warning: Connector toAirPort is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/Surfaces/SurfaceToAir.mo:8:3-12:115:writable] Warning: Connector toSurfacesPort is not balanced: The number of potential variables (6) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/BaseClasses/SurfaceGeneral.mo:4:3-6:117:writable] Warning: Connector toConstructionPort is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/Surfaces/SurfaceToAir.mo:5:3-7:118:writable] Warning: Connector toAirPort is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/Surfaces/SurfaceToAir.mo:8:3-12:115:writable] Warning: Connector toSurfacesPort is not balanced: The number of potential variables (6) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/BaseClasses/SurfaceGeneral.mo:4:3-6:117:writable] Warning: Connector toConstructionPort is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/Surfaces/SurfaceToAir.mo:5:3-7:118:writable] Warning: Connector toAirPort is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/Surfaces/SurfaceToAir.mo:8:3-12:115:writable] Warning: Connector toSurfacesPort is not balanced: The number of potential variables (6) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/BaseClasses/SurfaceGeneral.mo:4:3-6:117:writable] Warning: Connector toConstructionPort is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/Surfaces/SurfaceToAir.mo:5:3-7:118:writable] Warning: Connector toAirPort is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/Surfaces/SurfaceToAir.mo:8:3-12:115:writable] Warning: Connector toSurfacesPort is not balanced: The number of potential variables (6) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/BaseClasses/SurfaceGeneral.mo:4:3-6:117:writable] Warning: Connector toConstructionPort is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/Surfaces/SurfaceToAir.mo:5:3-7:118:writable] Warning: Connector toAirPort is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/Surfaces/SurfaceToAir.mo:8:3-12:115:writable] Warning: Connector toSurfacesPort is not balanced: The number of potential variables (6) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/BaseClasses/SurfaceGeneral.mo:4:3-6:117:writable] Warning: Connector toConstructionPort is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/Surfaces/SurfaceToAir.mo:5:3-7:118:writable] Warning: Connector toAirPort is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/Surfaces/SurfaceToAir.mo:8:3-12:115:writable] Warning: Connector toSurfacesPort is not balanced: The number of potential variables (6) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/BaseClasses/TriangularConstructionGeneral.mo:4:3-19:56:writable] Warning: Connector toSurfacePort_1 is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/BaseClasses/TriangularConstructionGeneral.mo:20:3-36:54:writable] Warning: Connector toSurfacePort_2 is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Climate/Sources/RadiationFixed.mo:4:3-10:117:writable] Warning: Connector radiationPort is not balanced: The number of potential variables (5) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/BaseClasses/TriangularConstructionGeneral.mo:4:3-19:56:writable] Warning: Connector toSurfacePort_1 is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/BaseClasses/TriangularConstructionGeneral.mo:20:3-36:54:writable] Warning: Connector toSurfacePort_2 is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Climate/Sources/RadiationFixed.mo:4:3-10:117:writable] Warning: Connector radiationPort is not balanced: The number of potential variables (5) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/BaseClasses/TriangularConstructionGeneral.mo:4:3-19:56:writable] Warning: Connector toSurfacePort_1 is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/BaseClasses/TriangularConstructionGeneral.mo:20:3-36:54:writable] Warning: Connector toSurfacePort_2 is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Climate/Sources/RadiationFixed.mo:4:3-10:117:writable] Warning: Connector radiationPort is not balanced: The number of potential variables (5) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/BaseClasses/TriangularConstructionGeneral.mo:4:3-19:56:writable] Warning: Connector toSurfacePort_1 is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/BaseClasses/TriangularConstructionGeneral.mo:20:3-36:54:writable] Warning: Connector toSurfacePort_2 is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Climate/Sources/RadiationFixed.mo:4:3-10:117:writable] Warning: Connector radiationPort is not balanced: The number of potential variables (5) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/BaseClasses/TriangularConstructionGeneral.mo:4:3-19:56:writable] Warning: Connector toSurfacePort_1 is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/BaseClasses/TriangularConstructionGeneral.mo:20:3-36:54:writable] Warning: Connector toSurfacePort_2 is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Climate/Sources/RadiationFixed.mo:4:3-10:117:writable] Warning: Connector radiationPort is not balanced: The number of potential variables (5) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/BaseClasses/TriangularConstructionGeneral.mo:4:3-19:56:writable] Warning: Connector toSurfacePort_1 is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/BaseClasses/TriangularConstructionGeneral.mo:20:3-36:54:writable] Warning: Connector toSurfacePort_2 is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Climate/Sources/RadiationFixed.mo:4:3-10:117:writable] Warning: Connector radiationPort is not balanced: The number of potential variables (5) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/BaseClasses/TriangularConstructionGeneral.mo:4:3-19:56:writable] Warning: Connector toSurfacePort_1 is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/BaseClasses/TriangularConstructionGeneral.mo:20:3-36:54:writable] Warning: Connector toSurfacePort_2 is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Climate/Sources/RadiationFixed.mo:4:3-10:117:writable] Warning: Connector radiationPort is not balanced: The number of potential variables (5) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/BaseClasses/TriangularConstructionGeneral.mo:4:3-19:56:writable] Warning: Connector toSurfacePort_1 is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/BaseClasses/TriangularConstructionGeneral.mo:20:3-36:54:writable] Warning: Connector toSurfacePort_2 is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Climate/Sources/RadiationFixed.mo:4:3-10:117:writable] Warning: Connector radiationPort is not balanced: The number of potential variables (5) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/BaseClasses/SurfaceGeneral.mo:4:3-6:117:writable] Warning: Connector toConstructionPort is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/Surfaces/SurfaceToAir.mo:5:3-7:118:writable] Warning: Connector toAirPort is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/Surfaces/SurfaceToAir.mo:8:3-12:115:writable] Warning: Connector toSurfacesPort is not balanced: The number of potential variables (6) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/BaseClasses/SurfaceGeneral.mo:4:3-6:117:writable] Warning: Connector toConstructionPort is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/Surfaces/SurfaceToAir.mo:5:3-7:118:writable] Warning: Connector toAirPort is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/Surfaces/SurfaceToAir.mo:8:3-12:115:writable] Warning: Connector toSurfacesPort is not balanced: The number of potential variables (6) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/BaseClasses/TriangularConstructionGeneral.mo:4:3-19:56:writable] Warning: Connector toSurfacePort_1 is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/BaseClasses/TriangularConstructionGeneral.mo:20:3-36:54:writable] Warning: Connector toSurfacePort_2 is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Climate/Sources/RadiationFixed.mo:4:3-10:117:writable] Warning: Connector radiationPort is not balanced: The number of potential variables (5) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/BaseClasses/TriangularConstructionGeneral.mo:4:3-19:56:writable] Warning: Connector toSurfacePort_1 is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/BaseClasses/TriangularConstructionGeneral.mo:20:3-36:54:writable] Warning: Connector toSurfacePort_2 is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Climate/Sources/RadiationFixed.mo:4:3-10:117:writable] Warning: Connector radiationPort is not balanced: The number of potential variables (5) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/BaseClasses/SurfaceGeneral.mo:4:3-6:117:writable] Warning: Connector toConstructionPort is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/Surfaces/SurfaceToAir.mo:5:3-7:118:writable] Warning: Connector toAirPort is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/Surfaces/SurfaceToAir.mo:8:3-12:115:writable] Warning: Connector toSurfacesPort is not balanced: The number of potential variables (6) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/BaseClasses/SurfaceGeneral.mo:4:3-6:117:writable] Warning: Connector toConstructionPort is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/Surfaces/SurfaceToAir.mo:5:3-7:118:writable] Warning: Connector toAirPort is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/Surfaces/SurfaceToAir.mo:8:3-12:115:writable] Warning: Connector toSurfacesPort is not balanced: The number of potential variables (6) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/BaseClasses/TriangularConstructionGeneral.mo:4:3-19:56:writable] Warning: Connector toSurfacePort_1 is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/BaseClasses/TriangularConstructionGeneral.mo:20:3-36:54:writable] Warning: Connector toSurfacePort_2 is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Climate/Sources/RadiationFixed.mo:4:3-10:117:writable] Warning: Connector radiationPort is not balanced: The number of potential variables (5) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/BaseClasses/TriangularConstructionGeneral.mo:4:3-19:56:writable] Warning: Connector toSurfacePort_1 is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/BaseClasses/TriangularConstructionGeneral.mo:20:3-36:54:writable] Warning: Connector toSurfacePort_2 is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Climate/Sources/RadiationFixed.mo:4:3-10:117:writable] Warning: Connector radiationPort is not balanced: The number of potential variables (5) is not equal to the number of flow variables (0).
Notification: Performance of NFTyping.typeComponents: time 0.009442/0.8863, allocations: 2.56 MB / 1.073 GB, free: 1.344 MB / 0.7169 GB
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems master/Buildings/Airvolumes/AirvolumeMixed.mo:70:5-70:12:writable] Warning: Conditional component 'air' is used in a non-connect context.
Notification: Performance of NFTyping.typeBindings: time 0.02005/0.9064, allocations: 5.653 MB / 1.079 GB, free: 14.82 MB / 0.7325 GB
Notification: Performance of NFTyping.typeClassSections: time 0.01411/0.9205, allocations: 4.05 MB / 1.083 GB, free: 12.36 MB / 0.7325 GB
Notification: Performance of NFFlatten.flatten: time 0.03797/0.9584, allocations: 26.3 MB / 1.108 GB, free: 11.2 MB / 0.7481 GB
Notification: Performance of NFFlatten.resolveConnections: time 0.03192/0.9904, allocations: 16.88 MB / 1.125 GB, free: 10.54 MB / 0.7637 GB
Notification: Performance of NFEvalConstants.evaluate: time 0.02671/1.017, allocations: 12.49 MB / 1.137 GB, free: 14.29 MB / 0.7794 GB
Notification: Performance of NFSimplifyModel.simplify: time 0.03078/1.048, allocations: 16.76 MB / 1.153 GB, free: 13.91 MB / 0.795 GB
Notification: Performance of NFPackage.collectConstants: time 0.01233/1.06, allocations: 3.602 MB / 1.157 GB, free: 10.3 MB / 0.795 GB
Notification: Performance of NFFlatten.collectFunctions: time 0.01972/1.08, allocations: 5.161 MB / 1.162 GB, free: 5.289 MB / 0.795 GB
Notification: Performance of NFScalarize.scalarize: time 0.01526/1.095, allocations: 9.092 MB / 1.171 GB, free: 12.24 MB / 0.8106 GB
Notification: Performance of NFVerifyModel.verify: time 0.03286/1.128, allocations: 14.6 MB / 1.185 GB, free: 13.64 MB / 0.8262 GB
Notification: Performance of NFConvertDAE.convert: time 0.06117/1.189, allocations: 42.56 MB / 1.227 GB, free: 3.762 MB / 0.8575 GB
Notification: Performance of FrontEnd - DAE generated: time 7.605e-06/1.189, allocations: 3.984 kB / 1.227 GB, free: 3.758 MB / 0.8575 GB
Notification: Performance of FrontEnd: time 1.613e-06/1.189, allocations: 0 / 1.227 GB, free: 3.758 MB / 0.8575 GB
Notification: Performance of Transformations before backend: time 0.001524/1.191, allocations: 0 / 1.227 GB, free: 3.758 MB / 0.8575 GB
Notification: Model statistics after passing the front-end and creating the data structures used by the back-end:
 * Number of equations: 5929
 * Number of variables: 5929
Notification: Performance of Generate backend data structure: time 0.07811/1.269, allocations: 27.08 MB / 1.253 GB, free: 8.445 MB / 0.8887 GB
Notification: Performance of prepare preOptimizeDAE: time 4.829e-05/1.269, allocations: 8.75 kB / 1.253 GB, free: 8.438 MB / 0.8887 GB
Notification: Performance of preOpt normalInlineFunction (simulation): time 0.02662/1.296, allocations: 7.693 MB / 1.261 GB, free: 0.7227 MB / 0.8887 GB
Notification: Performance of preOpt evaluateParameters (simulation): time 0.03244/1.328, allocations: 11.59 MB / 1.272 GB, free: 5.164 MB / 0.9044 GB
Notification: Performance of preOpt simplifyIfEquations (simulation): time 0.003241/1.331, allocations: 3.566 MB / 1.275 GB, free: 1.168 MB / 0.9044 GB
Notification: Performance of preOpt expandDerOperator (simulation): time 0.008458/1.34, allocations: 2.167 MB / 1.278 GB, free: 15.02 MB / 0.92 GB
Notification: Performance of preOpt clockPartitioning (simulation): time 0.09095/1.431, allocations: 35.4 MB / 1.312 GB, free: 10.4 MB / 0.9512 GB
Notification: Performance of preOpt findStateOrder (simulation): time 0.00086/1.431, allocations: 59.44 kB / 1.312 GB, free: 10.34 MB / 0.9512 GB
Notification: Performance of preOpt replaceEdgeChange (simulation): time 0.006815/1.438, allocations: 0.9298 MB / 1.313 GB, free: 9.426 MB / 0.9512 GB
Notification: Performance of preOpt inlineArrayEqn (simulation): time 0.001469/1.44, allocations: 1.204 MB / 1.314 GB, free: 8.219 MB / 0.9512 GB
Notification: Performance of preOpt removeEqualRHS (simulation): time 0.07921/1.519, allocations: 38.19 MB / 1.352 GB, free: 2.027 MB / 0.9825 GB
Warning: The model contains alias variables with redundant start and/or conflicting nominal values. It is recommended to resolve the conflicts, because otherwise the system could be hard to solve. To print the conflicting alias sets and the chosen candidates please use -d=aliasConflicts.
Notification: Performance of preOpt removeSimpleEquations (simulation): time 0.6385/2.157, allocations: 116.3 MB / 1.465 GB, free: 267 MB / 0.9825 GB
Notification: Performance of preOpt comSubExp (simulation): time 0.01975/2.177, allocations: 9.365 MB / 1.474 GB, free: 262.2 MB / 0.9825 GB
Notification: Performance of preOpt resolveLoops (simulation): time 0.007947/2.185, allocations: 4.646 MB / 1.479 GB, free: 259.8 MB / 0.9825 GB
Notification: Performance of preOpt evalFunc (simulation): time 0.002158/2.187, allocations: 386.6 kB / 1.479 GB, free: 259.7 MB / 0.9825 GB
Notification: Performance of preOpt encapsulateWhenConditions (simulation): time 0.009818/2.197, allocations: 5.304 MB / 1.484 GB, free: 256.3 MB / 0.9825 GB
Notification: Performance of pre-optimization done (n=590): time 1.74e-05/2.197, allocations: 0 / 1.484 GB, free: 256.3 MB / 0.9825 GB
Notification: Performance of matching and sorting (n=590): time 0.074/2.271, allocations: 23.36 MB / 1.507 GB, free: 233.3 MB / 0.9825 GB
Notification: Performance of inlineWhenForInitialization (initialization): time 0.0002528/2.271, allocations: 1.22 MB / 1.508 GB, free: 231.8 MB / 0.9825 GB
Notification: Performance of selectInitializationVariablesDAE (initialization): time 0.03015/2.302, allocations: 19.08 MB / 1.527 GB, free: 212.8 MB / 0.9825 GB
Notification: Performance of collectPreVariables (initialization): time 0.0019/2.303, allocations: 149.7 kB / 1.527 GB, free: 212.6 MB / 0.9825 GB
Notification: Performance of collectInitialEqns (initialization): time 0.009667/2.313, allocations: 9.963 MB / 1.537 GB, free: 202.7 MB / 0.9825 GB
Notification: Performance of collectInitialBindings (initialization): time 0.00315/2.316, allocations: 2.158 MB / 1.539 GB, free: 200.5 MB / 0.9825 GB
Notification: Performance of simplifyInitialFunctions (initialization): time 0.007644/2.324, allocations: 1.804 MB / 1.541 GB, free: 198.7 MB / 0.9825 GB
Notification: Performance of setup shared object (initialization): time 3.925e-05/2.324, allocations: 302.9 kB / 1.541 GB, free: 198.4 MB / 0.9825 GB
Notification: Performance of preBalanceInitialSystem (initialization): time 0.01027/2.334, allocations: 6.739 MB / 1.548 GB, free: 191.7 MB / 0.9825 GB
Notification: Performance of partitionIndependentBlocks (initialization): time 0.01113/2.345, allocations: 8.863 MB / 1.556 GB, free: 181.9 MB / 0.9825 GB
Notification: Performance of analyzeInitialSystem (initialization): time 18.81/21.15, allocations: 2.772 GB / 4.328 GB, free: 321.1 MB / 0.9825 GB
Notification: Performance of solveInitialSystemEqSystem (initialization): time 4.296e-05/21.15, allocations: 19.06 kB / 4.328 GB, free: 321.1 MB / 0.9825 GB
Notification: Performance of matching and sorting (n=1105) (initialization): time 0.04976/21.2, allocations: 23.78 MB / 4.351 GB, free: 299.8 MB / 0.9825 GB
Notification: Performance of prepare postOptimizeDAE: time 0.0009372/21.2, allocations: 1.043 MB / 4.352 GB, free: 298.6 MB / 0.9825 GB
Notification: Performance of postOpt simplifyComplexFunction (initialization): time 6.721e-05/21.2, allocations: 60.91 kB / 4.352 GB, free: 298.6 MB / 0.9825 GB
Notification: Performance of postOpt tearingSystem (initialization): time 0.05104/21.25, allocations: 17.61 MB / 4.37 GB, free: 280.9 MB / 0.9825 GB
Notification: Performance of postOpt solveSimpleEquations (initialization): time 0.01601/21.27, allocations: 3.475 MB / 4.373 GB, free: 277.4 MB / 0.9825 GB
Notification: Performance of postOpt calculateStrongComponentJacobians (initialization): time 0.05434/21.32, allocations: 70.5 MB / 4.442 GB, free: 204.1 MB / 0.9825 GB
Notification: Performance of postOpt simplifyAllExpressions (initialization): time 0.01833/21.34, allocations: 3.286 MB / 4.445 GB, free: 201.5 MB / 0.9825 GB
Notification: Performance of postOpt collapseArrayExpressions (initialization): time 0.002816/21.35, allocations: 423.8 kB / 4.445 GB, free: 201.1 MB / 0.9825 GB
Warning: Assuming fixed start value for the following 25 variables:
         zone.airvolume.mH2OLiq:VARIABLE(min = 0.0 start = zone.airvolume.mH2OLiq_start unit = \"kg\" fixed = true protected = true )  \"Liquid water mass\" type: Real
         wall5.construction.layer[1].T[1]:VARIABLE(min = 0.0 start = wall5.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 )  \"Temperature of the numerical node\" type: Real [2,1]
         wall5.construction.layer[2].T[1]:VARIABLE(min = 0.0 start = wall5.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 )  \"Temperature of the numerical node\" type: Real [2,1]
         wall6.construction.layer[1].T[1]:VARIABLE(min = 0.0 start = wall6.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 )  \"Temperature of the numerical node\" type: Real [2,1]
         wall6.construction.layer[2].T[1]:VARIABLE(min = 0.0 start = wall6.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 )  \"Temperature of the numerical node\" type: Real [2,1]
         wall7.construction.layer[1].T[1]:VARIABLE(min = 0.0 start = wall7.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 )  \"Temperature of the numerical node\" type: Real [2,1]
         wall7.construction.layer[2].T[1]:VARIABLE(min = 0.0 start = wall7.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 )  \"Temperature of the numerical node\" type: Real [2,1]
         wall8.construction.layer[1].T[1]:VARIABLE(min = 0.0 start = wall8.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 )  \"Temperature of the numerical node\" type: Real [2,1]
         wall8.construction.layer[2].T[1]:VARIABLE(min = 0.0 start = wall8.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 )  \"Temperature of the numerical node\" type: Real [2,1]
         wall1.construction.layer[1].T[1]:VARIABLE(min = 0.0 start = wall1.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 )  \"Temperature of the numerical node\" type: Real [2,1]
         wall1.construction.layer[2].T[1]:VARIABLE(min = 0.0 start = wall1.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 )  \"Temperature of the numerical node\" type: Real [2,1]
         wall2.construction.layer[1].T[1]:VARIABLE(min = 0.0 start = wall2.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 )  \"Temperature of the numerical node\" type: Real [2,1]
         wall2.construction.layer[2].T[1]:VARIABLE(min = 0.0 start = wall2.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 )  \"Temperature of the numerical node\" type: Real [2,1]
         wall4.construction.layer[1].T[1]:VARIABLE(min = 0.0 start = wall4.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 )  \"Temperature of the numerical node\" type: Real [2,1]
         wall4.construction.layer[2].T[1]:VARIABLE(min = 0.0 start = wall4.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 )  \"Temperature of the numerical node\" type: Real [2,1]
         wall3.construction.layer[1].T[1]:VARIABLE(min = 0.0 start = wall3.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 )  \"Temperature of the numerical node\" type: Real [2,1]
         wall3.construction.layer[2].T[1]:VARIABLE(min = 0.0 start = wall3.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 )  \"Temperature of the numerical node\" type: Real [2,1]
         wall9.construction.layer[1].T[1]:VARIABLE(min = 0.0 start = wall9.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 )  \"Temperature of the numerical node\" type: Real [2,1]
         wall9.construction.layer[2].T[1]:VARIABLE(min = 0.0 start = wall9.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 )  \"Temperature of the numerical node\" type: Real [2,1]
         wall10.construction.layer[1].T[1]:VARIABLE(min = 0.0 start = wall10.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 )  \"Temperature of the numerical node\" type: Real [2,1]
         wall10.construction.layer[2].T[1]:VARIABLE(min = 0.0 start = wall10.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 )  \"Temperature of the numerical node\" type: Real [2,1]
         wall11.construction.layer[1].T[1]:VARIABLE(min = 0.0 start = wall11.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 )  \"Temperature of the numerical node\" type: Real [2,1]
         wall11.construction.layer[2].T[1]:VARIABLE(min = 0.0 start = wall11.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 )  \"Temperature of the numerical node\" type: Real [2,1]
         wall12.construction.layer[1].T[1]:VARIABLE(min = 0.0 start = wall12.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 )  \"Temperature of the numerical node\" type: Real [2,1]
         wall12.construction.layer[2].T[1]:VARIABLE(min = 0.0 start = wall12.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 )  \"Temperature of the numerical node\" type: Real [2,1]
Notification: Performance of preBalanceInitialSystem (initialization_lambda0): time 0.02369/21.37, allocations: 12.82 MB / 4.458 GB, free: 188.3 MB / 0.9825 GB
Notification: Performance of partitionIndependentBlocks (initialization_lambda0): time 0.0128/21.38, allocations: 8.832 MB / 4.467 GB, free: 178.6 MB / 0.9825 GB
Notification: Performance of analyzeInitialSystem (initialization_lambda0): time 19.44/40.82, allocations: 2.772 GB / 7.238 GB, free: 323.1 MB / 0.9981 GB
Notification: Performance of solveInitialSystemEqSystem (initialization_lambda0): time 4.542e-05/40.82, allocations: 16.94 kB / 7.238 GB, free: 323.1 MB / 0.9981 GB
Notification: Performance of matching and sorting (n=1105) (initialization_lambda0): time 0.04936/40.87, allocations: 23.74 MB / 7.262 GB, free: 318.3 MB / 0.9981 GB
Notification: Performance of prepare postOptimizeDAE: time 0.0009672/40.87, allocations: 1.039 MB / 7.263 GB, free: 317.4 MB / 0.9981 GB
Notification: Performance of postOpt simplifyComplexFunction (initialization): time 8.202e-05/40.87, allocations: 60.91 kB / 7.263 GB, free: 317.4 MB / 0.9981 GB
Notification: Performance of postOpt tearingSystem (initialization): time 0.05013/40.92, allocations: 17.61 MB / 7.28 GB, free: 315.4 MB / 0.9981 GB
Notification: Performance of postOpt solveSimpleEquations (initialization): time 0.01575/40.94, allocations: 3.467 MB / 7.283 GB, free: 314.9 MB / 0.9981 GB
Notification: Performance of postOpt calculateStrongComponentJacobians (initialization): time 0.05336/40.99, allocations: 70.44 MB / 7.352 GB, free: 241.7 MB / 0.9981 GB
Notification: Performance of postOpt simplifyAllExpressions (initialization): time 0.01487/41.01, allocations: 2.172 MB / 7.354 GB, free: 239.6 MB / 0.9981 GB
Notification: Performance of postOpt collapseArrayExpressions (initialization): time 0.003383/41.01, allocations: 431.6 kB / 7.355 GB, free: 239.1 MB / 0.9981 GB
Warning: Assuming fixed start value for the following 25 variables:
         zone.airvolume.mH2OLiq:VARIABLE(min = 0.0 start = zone.airvolume.mH2OLiq_start unit = \"kg\" fixed = true protected = true )  \"Liquid water mass\" type: Real
         wall5.construction.layer[1].T[1]:VARIABLE(min = 0.0 start = wall5.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 )  \"Temperature of the numerical node\" type: Real [2,1]
         wall5.construction.layer[2].T[1]:VARIABLE(min = 0.0 start = wall5.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 )  \"Temperature of the numerical node\" type: Real [2,1]
         wall6.construction.layer[1].T[1]:VARIABLE(min = 0.0 start = wall6.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 )  \"Temperature of the numerical node\" type: Real [2,1]
         wall6.construction.layer[2].T[1]:VARIABLE(min = 0.0 start = wall6.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 )  \"Temperature of the numerical node\" type: Real [2,1]
         wall7.construction.layer[1].T[1]:VARIABLE(min = 0.0 start = wall7.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 )  \"Temperature of the numerical node\" type: Real [2,1]
         wall7.construction.layer[2].T[1]:VARIABLE(min = 0.0 start = wall7.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 )  \"Temperature of the numerical node\" type: Real [2,1]
         wall8.construction.layer[1].T[1]:VARIABLE(min = 0.0 start = wall8.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 )  \"Temperature of the numerical node\" type: Real [2,1]
         wall8.construction.layer[2].T[1]:VARIABLE(min = 0.0 start = wall8.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 )  \"Temperature of the numerical node\" type: Real [2,1]
         wall1.construction.layer[1].T[1]:VARIABLE(min = 0.0 start = wall1.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 )  \"Temperature of the numerical node\" type: Real [2,1]
         wall1.construction.layer[2].T[1]:VARIABLE(min = 0.0 start = wall1.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 )  \"Temperature of the numerical node\" type: Real [2,1]
         wall2.construction.layer[1].T[1]:VARIABLE(min = 0.0 start = wall2.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 )  \"Temperature of the numerical node\" type: Real [2,1]
         wall2.construction.layer[2].T[1]:VARIABLE(min = 0.0 start = wall2.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 )  \"Temperature of the numerical node\" type: Real [2,1]
         wall4.construction.layer[1].T[1]:VARIABLE(min = 0.0 start = wall4.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 )  \"Temperature of the numerical node\" type: Real [2,1]
         wall4.construction.layer[2].T[1]:VARIABLE(min = 0.0 start = wall4.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 )  \"Temperature of the numerical node\" type: Real [2,1]
         wall3.construction.layer[1].T[1]:VARIABLE(min = 0.0 start = wall3.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 )  \"Temperature of the numerical node\" type: Real [2,1]
         wall3.construction.layer[2].T[1]:VARIABLE(min = 0.0 start = wall3.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 )  \"Temperature of the numerical node\" type: Real [2,1]
         wall9.construction.layer[1].T[1]:VARIABLE(min = 0.0 start = wall9.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 )  \"Temperature of the numerical node\" type: Real [2,1]
         wall9.construction.layer[2].T[1]:VARIABLE(min = 0.0 start = wall9.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 )  \"Temperature of the numerical node\" type: Real [2,1]
         wall10.construction.layer[1].T[1]:VARIABLE(min = 0.0 start = wall10.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 )  \"Temperature of the numerical node\" type: Real [2,1]
         wall10.construction.layer[2].T[1]:VARIABLE(min = 0.0 start = wall10.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 )  \"Temperature of the numerical node\" type: Real [2,1]
         wall11.construction.layer[1].T[1]:VARIABLE(min = 0.0 start = wall11.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 )  \"Temperature of the numerical node\" type: Real [2,1]
         wall11.construction.layer[2].T[1]:VARIABLE(min = 0.0 start = wall11.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 )  \"Temperature of the numerical node\" type: Real [2,1]
         wall12.construction.layer[1].T[1]:VARIABLE(min = 0.0 start = wall12.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 )  \"Temperature of the numerical node\" type: Real [2,1]
         wall12.construction.layer[2].T[1]:VARIABLE(min = 0.0 start = wall12.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 )  \"Temperature of the numerical node\" type: Real [2,1]
Notification: Model statistics after passing the back-end for initialization:
 * Number of independent subsystems: 277
 * Number of states: 0 ()
 * Number of discrete variables: 17 (ambience.radiation[1].outsidePolarCircle,ambience.radiation[2].outsidePolarCircle,ambience.radiation[3].outsidePolarCircle,ambience.radiation[4].outsidePolarCircle,ambience.radiation[5].outsidePolarCircle,ambience.radiation[6].outsidePolarCircle,ambience.radiation[7].outsidePolarCircle,ambience.radiation[8].outsidePolarCircle,ambience.radiation[9].outsidePolarCircle,ambience.radiation[10].outsidePolarCircle,ambience.radiation[11].outsidePolarCircle,ambience.radiation[12].outsidePolarCircle,ambience.weatherDataReader.weatherData.conTim.tNext,$PRE.ambience.weatherDataReader.weatherData.conTim.tNext,$whenCondition1,zone.coolingLoad.I.local_reset,zone.heatingLoad.I.local_reset)
 * Number of discrete states: 0 ()
 * Number of clocked states: 0 ()
 * Top-level inputs: 0
Notification: Strong component statistics for initialization (926):
 * Single equations (assignments): 853
 * Array equations: 0
 * Algorithm blocks: 24
 * Record equations: 0
 * When equations: 0
 * If-equations: 0
 * Equation systems (not torn): 24
 * Torn equation systems: 25
 * Mixed (continuous/discrete) equation systems: 0
Notification: Equation system details (not torn):
 * Constant Jacobian (size): 0 systems
 * Linear Jacobian (size,density): 0 systems
 * Non-linear Jacobian (size): 24 systems
   {1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1}
 * Without analytic Jacobian (size): 0 systems
Notification: Torn system details for strict tearing set:
 * Linear torn systems (#iteration vars, #inner vars, density): 12 systems
   {(1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%)}
 * Non-linear torn systems (#iteration vars, #inner vars): 13 systems
   {(13,47), (1,3), (1,3), (1,3), (1,3), (1,3), (1,3), (1,3), (1,3), (1,3), (1,3), (1,3), (1,3)}
Notification: Performance of prepare postOptimizeDAE: time 0.004228/41.01, allocations: 0.9038 MB / 7.355 GB, free: 238.3 MB / 0.9981 GB
Notification: Performance of postOpt lateInlineFunction (simulation): time 0.002685/41.02, allocations: 1.525 MB / 7.357 GB, free: 236.7 MB / 0.9981 GB
Notification: Performance of postOpt wrapFunctionCalls (simulation): time 0.0385/41.06, allocations: 17.44 MB / 7.374 GB, free: 219 MB / 0.9981 GB
Notification: Performance of postOpt inlineArrayEqn (simulation): time 7.275e-05/41.06, allocations: 80 kB / 7.374 GB, free: 219 MB / 0.9981 GB
Notification: Performance of postOpt constantLinearSystem (simulation): time 3.493e-05/41.06, allocations: 16 kB / 7.374 GB, free: 218.9 MB / 0.9981 GB
Notification: Performance of postOpt simplifysemiLinear (simulation): time 0.03254/41.09, allocations: 13.88 MB / 7.388 GB, free: 204.8 MB / 0.9981 GB
Notification: Performance of postOpt removeSimpleEquations (simulation): time 0.07864/41.17, allocations: 38.68 MB / 7.425 GB, free: 165.8 MB / 0.9981 GB
Notification: Performance of postOpt simplifyComplexFunction (simulation): time 8.178e-05/41.17, allocations: 12 kB / 7.425 GB, free: 165.8 MB / 0.9981 GB
Notification: Performance of postOpt solveSimpleEquations (simulation): time 0.006064/41.17, allocations: 1.166 MB / 7.427 GB, free: 164.7 MB / 0.9981 GB
Notification: Performance of postOpt tearingSystem (simulation): time 0.05283/41.23, allocations: 18.58 MB / 7.445 GB, free: 145.9 MB / 0.9981 GB
Notification: Performance of postOpt inputDerivativesUsed (simulation): time 0.001897/41.23, allocations: 211.9 kB / 7.445 GB, free: 145.7 MB / 0.9981 GB
Notification: Performance of postOpt calculateStrongComponentJacobians (simulation): time 0.05268/41.28, allocations: 68.62 MB / 7.512 GB, free: 73.59 MB / 0.9981 GB
Notification: Performance of postOpt calculateStateSetsJacobians (simulation): time 8.816e-06/41.28, allocations: 19.94 kB / 7.512 GB, free: 73.57 MB / 0.9981 GB
Notification: Performance of postOpt symbolicJacobian (simulation): time 0.04696/41.33, allocations: 23.18 MB / 7.535 GB, free: 49.86 MB / 0.9981 GB
Notification: Performance of postOpt removeConstants (simulation): time 0.01006/41.34, allocations: 3.141 MB / 7.538 GB, free: 46.71 MB / 0.9981 GB
Notification: Performance of postOpt simplifyTimeIndepFuncCalls (simulation): time 0.005643/41.34, allocations: 172 kB / 7.538 GB, free: 46.54 MB / 0.9981 GB
Notification: Performance of postOpt simplifyAllExpressions (simulation): time 0.00996/41.35, allocations: 0.7021 MB / 7.538 GB, free: 45.84 MB / 0.9981 GB
Notification: Performance of postOpt findZeroCrossings (simulation): time 0.00259/41.36, allocations: 0.6176 MB / 7.539 GB, free: 45.21 MB / 0.9981 GB
Notification: Performance of postOpt collapseArrayExpressions (simulation): time 0.001541/41.36, allocations: 227.9 kB / 7.539 GB, free: 44.99 MB / 0.9981 GB
Notification: Performance of sorting global known variables: time 0.02327/41.38, allocations: 13.34 MB / 7.552 GB, free: 31.73 MB / 0.9981 GB
Notification: Performance of sort global known variables: time 2.31e-07/41.38, allocations: 0 / 7.552 GB, free: 31.73 MB / 0.9981 GB
Notification: Performance of remove unused functions: time 0.03213/41.41, allocations: 9.895 MB / 7.562 GB, free: 21.82 MB / 0.9981 GB
Notification: Model statistics after passing the back-end for simulation:
 * Number of independent subsystems: 54
 * Number of states: 30 (zone.airvolume.mH2OLiq,zone.airvolume.air.dynBal.U,zone.airvolume.air.dynBal.m,zone.airvolume.air.dynBal.mXi[1],zone.heatingLoad.I.y,zone.coolingLoad.I.y,wall5.construction.layer[1].T[1],wall5.construction.layer[2].T[1],wall6.construction.layer[1].T[1],wall6.construction.layer[2].T[1],wall7.construction.layer[1].T[1],wall7.construction.layer[2].T[1],wall8.construction.layer[1].T[1],wall8.construction.layer[2].T[1],wall1.construction.layer[1].T[1],wall1.construction.layer[2].T[1],wall2.construction.layer[1].T[1],wall2.construction.layer[2].T[1],wall4.construction.layer[1].T[1],wall4.construction.layer[2].T[1],wall3.construction.layer[1].T[1],wall3.construction.layer[2].T[1],wall9.construction.layer[1].T[1],wall9.construction.layer[2].T[1],wall10.construction.layer[1].T[1],wall10.construction.layer[2].T[1],wall11.construction.layer[1].T[1],wall11.construction.layer[2].T[1],wall12.construction.layer[1].T[1],wall12.construction.layer[2].T[1])
 * Number of discrete variables: 2 ($whenCondition1,ambience.weatherDataReader.weatherData.conTim.tNext)
 * Number of discrete states: 1 (ambience.weatherDataReader.weatherData.conTim.tNext)
 * Number of clocked states: 0 ()
 * Top-level inputs: 0
Notification: Strong component statistics for simulation (627):
 * Single equations (assignments): 577
 * Array equations: 0
 * Algorithm blocks: 0
 * Record equations: 0
 * When equations: 1
 * If-equations: 0
 * Equation systems (not torn): 0
 * Torn equation systems: 49
 * Mixed (continuous/discrete) equation systems: 0
Notification: Torn system details for strict tearing set:
 * Linear torn systems (#iteration vars, #inner vars, density): 12 systems
   {(1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%)}
 * Non-linear torn systems (#iteration vars, #inner vars): 37 systems
   {(13,47), (1,1), (1,1), (1,1), (1,1), (1,1), (1,1), (1,1), (1,1), (1,1), (1,1), (1,1), (1,1), (1,3), (1,3), (1,3), (1,3), (1,3), (1,3), (1,3), (1,3), (1,3), (1,3), (1,3), (1,3), (1,1), (1,1), (1,1), (1,1), (1,1), (1,1), (1,1), (1,1), (1,1), (1,1), (1,1), (1,1)}
Notification: Performance of Backend phase and start with SimCode phase: time 0.004166/41.42, allocations: 0.875 MB / 7.563 GB, free: 21.12 MB / 0.9981 GB
Notification: Performance of simCode: created initialization part: time 0.6218/42.04, allocations: 40.42 MB / 7.602 GB, free: 318.8 MB / 0.9981 GB
Notification: Performance of simCode: created event and clocks part: time 2.181e-05/42.04, allocations: 2.812 kB / 7.602 GB, free: 318.8 MB / 0.9981 GB
Notification: Performance of simCode: created simulation system equations: time 0.01725/42.06, allocations: 9.289 MB / 7.611 GB, free: 315.8 MB / 0.9981 GB
Notification: Performance of simCode: created of all other equations (e.g. parameter, nominal, assert, etc): time 0.01879/42.07, allocations: 3.516 MB / 7.615 GB, free: 315.4 MB / 0.9981 GB
Notification: Performance of simCode: created linear, non-linear and system jacobian parts: time 0.0816/42.16, allocations: 41.45 MB / 7.655 GB, free: 300.3 MB / 0.9981 GB
Notification: Performance of simCode: some other stuff during SimCode phase: time 0.02235/42.18, allocations: 11.66 MB / 7.667 GB, free: 296.9 MB / 0.9981 GB
Notification: Performance of simCode: all other stuff during SimCode phase: time 0.007104/42.19, allocations: 0.9299 MB / 7.668 GB, free: 296 MB / 0.9981 GB
Notification: Performance of SimCode: time 1.583e-06/42.19, allocations: 0 / 7.668 GB, free: 296 MB / 0.9981 GB
Notification: Performance of Templates: time 12.51/54.69, allocations: 5.254 GB / 12.92 GB, free: 343.9 MB / 1.045 GB
"
[Timeout remaining time 605]
make -j1 -f BuildingSystems_BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DTriangularWalls.makefile [Timeout 660]
make -j1 -f BuildingSystems_BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DTriangularWalls.makefile clang++ -std=c++17  -fopenmp=libomp  -Winvalid-pch -O2 -g -DNDEBUG -fPIC   -std=c++11 -DBOOST_ALL_DYN_LINK   -DUSE_DGESV -DUSE_LOGGER -DOMC_BUILD -DUSE_THREAD -DSUNDIALS_MAJOR_VERSION=5 -DSUNDIALS_MINOR_VERSION=4 -DPMC_USE_SUNDIALS -I"." -I"/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/" -I. "-I/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.1.0+maint.om/Resources/C-Sources" -I"." -I"." -I"/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/include/omc/sundials" "-I/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.1.0+maint.om/Resources/C-Sources"    -DMEASURETIME_PROFILEBLOCKS -DUSE_LOGGER  -c -o OMCppBuildingSystems_BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DTriangularWallsCalcHelperMain.o OMCppBuildingSystems_BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DTriangularWallsCalcHelperMain.cpp
In file included from OMCppBuildingSystems_BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DTriangularWallsCalcHelperMain.cpp:29:
./OMCppBuildingSystems_BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DTriangularWallsInitialize.cpp:9753:7: error: no matching function for call to object of type 'StatArrayDim1<double, 1, true>'
      _wall12_P_construction_P_layer2_P_dx_(2,i_) = _wall12_P_construction_P_layer2_P_lengthX_;
      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1117:20: note: candidate function not viable: requires single argument 'idx', but 2 arguments were provided
  virtual const T& operator()(const vector<size_t>& idx) const
                   ^
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1126:14: note: candidate function not viable: requires single argument 'idx', but 2 arguments were provided
  virtual T& operator()(const vector<size_t>& idx)
             ^
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1135:21: note: candidate function not viable: requires single argument 'index', but 2 arguments were provided
  inline virtual T& operator()(size_t index)
                    ^
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1144:27: note: candidate function not viable: requires single argument 'index', but 2 arguments were provided
  inline virtual const T& operator()(size_t index) const
                          ^
In file included from OMCppBuildingSystems_BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DTriangularWallsCalcHelperMain.cpp:29:
./OMCppBuildingSystems_BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DTriangularWallsInitialize.cpp:9755:7: error: no matching function for call to object of type 'StatArrayDim1<double, 1, true>'
      _wall12_P_construction_P_layer2_P_C_(2,i_) = ((((_wall12_P_construction_P_layer2_P_material_P_c_ * _wall12_P_construction_P_layer2_P_material_P_rho_) * _wall12_P_construction_P_layer2_P_dx_(2,i_)) * _wall12_P_construction_P_layer2_P_lengthY_) * _wall12_P_construction_P_layer2_P_lengthZ_);
      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1117:20: note: candidate function not viable: requires single argument 'idx', but 2 arguments were provided
  virtual const T& operator()(const vector<size_t>& idx) const
                   ^
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1126:14: note: candidate function not viable: requires single argument 'idx', but 2 arguments were provided
  virtual T& operator()(const vector<size_t>& idx)
             ^
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1135:21: note: candidate function not viable: requires single argument 'index', but 2 arguments were provided
  inline virtual T& operator()(size_t index)
                    ^
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1144:27: note: candidate function not viable: requires single argument 'index', but 2 arguments were provided
  inline virtual const T& operator()(size_t index) const
                          ^
In file included from OMCppBuildingSystems_BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DTriangularWallsCalcHelperMain.cpp:29:
./OMCppBuildingSystems_BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DTriangularWallsInitialize.cpp:9755:159: error: no matching function for call to object of type 'StatArrayDim1<double, 1, true>'
      _wall12_P_construction_P_layer2_P_C_(2,i_) = ((((_wall12_P_construction_P_layer2_P_material_P_c_ * _wall12_P_construction_P_layer2_P_material_P_rho_) * _wall12_P_construction_P_layer2_P_dx_(2,i_)) * _wall12_P_construction_P_layer2_P_lengthY_) * _wall12_P_construction_P_layer2_P_lengthZ_);
                                                                                                                                                              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1117:20: note: candidate function not viable: requires single argument 'idx', but 2 arguments were provided
  virtual const T& operator()(const vector<size_t>& idx) const
                   ^
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1126:14: note: candidate function not viable: requires single argument 'idx', but 2 arguments were provided
  virtual T& operator()(const vector<size_t>& idx)
             ^
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1135:21: note: candidate function not viable: requires single argument 'index', but 2 arguments were provided
  inline virtual T& operator()(size_t index)
                    ^
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1144:27: note: candidate function not viable: requires single argument 'index', but 2 arguments were provided
  inline virtual const T& operator()(size_t index) const
                          ^
In file included from OMCppBuildingSystems_BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DTriangularWallsCalcHelperMain.cpp:29:
./OMCppBuildingSystems_BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DTriangularWallsInitialize.cpp:9776:11: error: no matching function for call to object of type 'StatArrayDim1<double, 2, true>'
          _wall12_P_construction_P_layer2_P_CTh_(2,i_) = ((division(_wall12_P_construction_P_layer2_P_material_P_lambda_,_wall12_P_construction_P_layer2_P_dx_(2,i_),!_initial,"wall12.construction.layer[2].dx[i]") * _wall12_P_construction_P_layer2_P_lengthY_) * _wall12_P_construction_P_layer2_P_lengthZ_);
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1117:20: note: candidate function not viable: requires single argument 'idx', but 2 arguments were provided
  virtual const T& operator()(const vector<size_t>& idx) const
                   ^
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1126:14: note: candidate function not viable: requires single argument 'idx', but 2 arguments were provided
  virtual T& operator()(const vector<size_t>& idx)
             ^
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1135:21: note: candidate function not viable: requires single argument 'index', but 2 arguments were provided
  inline virtual T& operator()(size_t index)
                    ^
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1144:27: note: candidate function not viable: requires single argument 'index', but 2 arguments were provided
  inline virtual const T& operator()(size_t index) const
                          ^
In file included from OMCppBuildingSystems_BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DTriangularWallsCalcHelperMain.cpp:29:
./OMCppBuildingSystems_BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DTriangularWallsInitialize.cpp:9776:122: error: no matching function for call to object of type 'StatArrayDim1<double, 1, true>'
          _wall12_P_construction_P_layer2_P_CTh_(2,i_) = ((division(_wall12_P_construction_P_layer2_P_material_P_lambda_,_wall12_P_construction_P_layer2_P_dx_(2,i_),!_initial,"wall12.construction.layer[2].dx[i]") * _wall12_P_construction_P_layer2_P_lengthY_) * _wall12_P_construction_P_layer2_P_lengthZ_);
                                                                                                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1117:20: note: candidate function not viable: requires single argument 'idx', but 2 arguments were provided
  virtual const T& operator()(const vector<size_t>& idx) const
                   ^
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1126:14: note: candidate function not viable: requires single argument 'idx', but 2 arguments were provided
  virtual T& operator()(const vector<size_t>& idx)
             ^
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1135:21: note: candidate function not viable: requires single argument 'index', but 2 arguments were provided
  inline virtual T& operator()(size_t index)
                    ^
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1144:27: note: candidate function not viable: requires single argument 'index', but 2 arguments were provided
  inline virtual const T& operator()(size_t index) const
                          ^
In file included from OMCppBuildingSystems_BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DTriangularWallsCalcHelperMain.cpp:29:
./OMCppBuildingSystems_BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DTriangularWallsInitialize.cpp:9779:11: error: no matching function for call to object of type 'StatArrayDim1<double, 2, true>'
          _wall12_P_construction_P_layer2_P_CTh_(2,i_) = ((division((2.0 * _wall12_P_construction_P_layer2_P_material_P_lambda_),_wall12_P_construction_P_layer2_P_dx_(2,(i_ - 1)),!_initial,"wall12.construction.layer[2].dx[i - 1]") * _wall12_P_construction_P_layer2_P_lengthY_) * _wall12_P_construction_P_layer2_P_lengthZ_);
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1117:20: note: candidate function not viable: requires single argument 'idx', but 2 arguments were provided
  virtual const T& operator()(const vector<size_t>& idx) const
                   ^
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1126:14: note: candidate function not viable: requires single argument 'idx', but 2 arguments were provided
  virtual T& operator()(const vector<size_t>& idx)
             ^
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1135:21: note: candidate function not viable: requires single argument 'index', but 2 arguments were provided
  inline virtual T& operator()(size_t index)
                    ^
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1144:27: note: candidate function not viable: requires single argument 'index', but 2 arguments were provided
  inline virtual const T& operator()(size_t index) const
                          ^
In file included from OMCppBuildingSystems_BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DTriangularWallsCalcHelperMain.cpp:29:
./OMCppBuildingSystems_BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DTriangularWallsInitialize.cpp:9779:130: error: no matching function for call to object of type 'StatArrayDim1<double, 1, true>'
          _wall12_P_construction_P_layer2_P_CTh_(2,i_) = ((division((2.0 * _wall12_P_construction_P_layer2_P_material_P_lambda_),_wall12_P_construction_P_layer2_P_dx_(2,(i_ - 1)),!_initial,"wall12.construction.layer[2].dx[i - 1]") * _wall12_P_construction_P_layer2_P_lengthY_) * _wall12_P_construction_P_layer2_P_lengthZ_);
                                                                                                                                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1117:20: note: candidate function not viable: requires single argument 'idx', but 2 arguments were provided
  virtual const T& operator()(const vector<size_t>& idx) const
                   ^
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1126:14: note: candidate function not viable: requires single argument 'idx', but 2 arguments were provided
  virtual T& operator()(const vector<size_t>& idx)
             ^
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1135:21: note: candidate function not viable: requires single argument 'index', but 2 arguments were provided
  inline virtual T& operator()(size_t index)
                    ^
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1144:27: note: candidate function not viable: requires single argument 'index', but 2 arguments were provided
  inline virtual const T& operator()(size_t index) const
                          ^
In file included from OMCppBuildingSystems_BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DTriangularWallsCalcHelperMain.cpp:29:
./OMCppBuildingSystems_BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DTriangularWallsInitialize.cpp:9906:7: error: no matching function for call to object of type 'StatArrayDim1<double, 1, true>'
      _wall12_P_construction_P_layer1_P_dx_(1,i_) = _wall12_P_construction_P_layer1_P_lengthX_;
      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1117:20: note: candidate function not viable: requires single argument 'idx', but 2 arguments were provided
  virtual const T& operator()(const vector<size_t>& idx) const
                   ^
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1126:14: note: candidate function not viable: requires single argument 'idx', but 2 arguments were provided
  virtual T& operator()(const vector<size_t>& idx)
             ^
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1135:21: note: candidate function not viable: requires single argument 'index', but 2 arguments were provided
  inline virtual T& operator()(size_t index)
                    ^
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1144:27: note: candidate function not viable: requires single argument 'index', but 2 arguments were provided
  inline virtual const T& operator()(size_t index) const
                          ^
In file included from OMCppBuildingSystems_BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DTriangularWallsCalcHelperMain.cpp:29:
./OMCppBuildingSystems_BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DTriangularWallsInitialize.cpp:9908:7: error: no matching function for call to object of type 'StatArrayDim1<double, 1, true>'
      _wall12_P_construction_P_layer1_P_C_(1,i_) = ((((_wall12_P_construction_P_layer1_P_material_P_c_ * _wall12_P_construction_P_layer1_P_material_P_rho_) * _wall12_P_construction_P_layer1_P_dx_(1,i_)) * _wall12_P_construction_P_layer1_P_lengthY_) * _wall12_P_construction_P_layer1_P_lengthZ_);
      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1117:20: note: candidate function not viable: requires single argument 'idx', but 2 arguments were provided
  virtual const T& operator()(const vector<size_t>& idx) const
                   ^
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1126:14: note: candidate function not viable: requires single argument 'idx', but 2 arguments were provided
  virtual T& operator()(const vector<size_t>& idx)
             ^
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1135:21: note: candidate function not viable: requires single argument 'index', but 2 arguments were provided
  inline virtual T& operator()(size_t index)
                    ^
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1144:27: note: candidate function not viable: requires single argument 'index', but 2 arguments were provided
  inline virtual const T& operator()(size_t index) const
                          ^
In file included from OMCppBuildingSystems_BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DTriangularWallsCalcHelperMain.cpp:29:
./OMCppBuildingSystems_BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DTriangularWallsInitialize.cpp:9908:159: error: no matching function for call to object of type 'StatArrayDim1<double, 1, true>'
      _wall12_P_construction_P_layer1_P_C_(1,i_) = ((((_wall12_P_construction_P_layer1_P_material_P_c_ * _wall12_P_construction_P_layer1_P_material_P_rho_) * _wall12_P_construction_P_layer1_P_dx_(1,i_)) * _wall12_P_construction_P_layer1_P_lengthY_) * _wall12_P_construction_P_layer1_P_lengthZ_);
                                                                                                                                                              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1117:20: note: candidate function not viable: requires single argument 'idx', but 2 arguments were provided
  virtual const T& operator()(const vector<size_t>& idx) const
                   ^
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1126:14: note: candidate function not viable: requires single argument 'idx', but 2 arguments were provided
  virtual T& operator()(const vector<size_t>& idx)
             ^
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1135:21: note: candidate function not viable: requires single argument 'index', but 2 arguments were provided
  inline virtual T& operator()(size_t index)
                    ^
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1144:27: note: candidate function not viable: requires single argument 'index', but 2 arguments were provided
  inline virtual const T& operator()(size_t index) const
                          ^
In file included from OMCppBuildingSystems_BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DTriangularWallsCalcHelperMain.cpp:29:
./OMCppBuildingSystems_BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DTriangularWallsInitialize.cpp:9929:11: error: no matching function for call to object of type 'StatArrayDim1<double, 2, true>'
          _wall12_P_construction_P_layer1_P_CTh_(1,i_) = ((division(_wall12_P_construction_P_layer1_P_material_P_lambda_,_wall12_P_construction_P_layer1_P_dx_(1,i_),!_initial,"wall12.construction.layer[1].dx[i]") * _wall12_P_construction_P_layer1_P_lengthY_) * _wall12_P_construction_P_layer1_P_lengthZ_);
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1117:20: note: candidate function not viable: requires single argument 'idx', but 2 arguments were provided
  virtual const T& operator()(const vector<size_t>& idx) const
                   ^
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1126:14: note: candidate function not viable: requires single argument 'idx', but 2 arguments were provided
  virtual T& operator()(const vector<size_t>& idx)
             ^
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1135:21: note: candidate function not viable: requires single argument 'index', but 2 arguments were provided
  inline virtual T& operator()(size_t index)
                    ^
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1144:27: note: candidate function not viable: requires single argument 'index', but 2 arguments were provided
  inline virtual const T& operator()(size_t index) const
                          ^
In file included from OMCppBuildingSystems_BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DTriangularWallsCalcHelperMain.cpp:29:
./OMCppBuildingSystems_BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DTriangularWallsInitialize.cpp:9929:122: error: no matching function for call to object of type 'StatArrayDim1<double, 1, true>'
          _wall12_P_construction_P_layer1_P_CTh_(1,i_) = ((division(_wall12_P_construction_P_layer1_P_material_P_lambda_,_wall12_P_construction_P_layer1_P_dx_(1,i_),!_initial,"wall12.construction.layer[1].dx[i]") * _wall12_P_construction_P_layer1_P_lengthY_) * _wall12_P_construction_P_layer1_P_lengthZ_);
                                                                                                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1117:20: note: candidate function not viable: requires single argument 'idx', but 2 arguments were provided
  virtual const T& operator()(const vector<size_t>& idx) const
                   ^
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1126:14: note: candidate function not viable: requires single argument 'idx', but 2 arguments were provided
  virtual T& operator()(const vector<size_t>& idx)
             ^
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1135:21: note: candidate function not viable: requires single argument 'index', but 2 arguments were provided
  inline virtual T& operator()(size_t index)
                    ^
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1144:27: note: candidate function not viable: requires single argument 'index', but 2 arguments were provided
  inline virtual const T& operator()(size_t index) const
                          ^
In file included from OMCppBuildingSystems_BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DTriangularWallsCalcHelperMain.cpp:29:
./OMCppBuildingSystems_BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DTriangularWallsInitialize.cpp:9932:11: error: no matching function for call to object of type 'StatArrayDim1<double, 2, true>'
          _wall12_P_construction_P_layer1_P_CTh_(1,i_) = ((division((2.0 * _wall12_P_construction_P_layer1_P_material_P_lambda_),_wall12_P_construction_P_layer1_P_dx_(1,(i_ - 1)),!_initial,"wall12.construction.layer[1].dx[i - 1]") * _wall12_P_construction_P_layer1_P_lengthY_) * _wall12_P_construction_P_layer1_P_lengthZ_);
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1117:20: note: candidate function not viable: requires single argument 'idx', but 2 arguments were provided
  virtual const T& operator()(const vector<size_t>& idx) const
                   ^
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1126:14: note: candidate function not viable: requires single argument 'idx', but 2 arguments were provided
  virtual T& operator()(const vector<size_t>& idx)
             ^
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1135:21: note: candidate function not viable: requires single argument 'index', but 2 arguments were provided
  inline virtual T& operator()(size_t index)
                    ^
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1144:27: note: candidate function not viable: requires single argument 'index', but 2 arguments were provided
  inline virtual const T& operator()(size_t index) const
                          ^
In file included from OMCppBuildingSystems_BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DTriangularWallsCalcHelperMain.cpp:29:
./OMCppBuildingSystems_BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DTriangularWallsInitialize.cpp:9932:130: error: no matching function for call to object of type 'StatArrayDim1<double, 1, true>'
          _wall12_P_construction_P_layer1_P_CTh_(1,i_) = ((division((2.0 * _wall12_P_construction_P_layer1_P_material_P_lambda_),_wall12_P_construction_P_layer1_P_dx_(1,(i_ - 1)),!_initial,"wall12.construction.layer[1].dx[i - 1]") * _wall12_P_construction_P_layer1_P_lengthY_) * _wall12_P_construction_P_layer1_P_lengthZ_);
                                                                                                                                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1117:20: note: candidate function not viable: requires single argument 'idx', but 2 arguments were provided
  virtual const T& operator()(const vector<size_t>& idx) const
                   ^
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1126:14: note: candidate function not viable: requires single argument 'idx', but 2 arguments were provided
  virtual T& operator()(const vector<size_t>& idx)
             ^
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1135:21: note: candidate function not viable: requires single argument 'index', but 2 arguments were provided
  inline virtual T& operator()(size_t index)
                    ^
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1144:27: note: candidate function not viable: requires single argument 'index', but 2 arguments were provided
  inline virtual const T& operator()(size_t index) const
                          ^
In file included from OMCppBuildingSystems_BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DTriangularWallsCalcHelperMain.cpp:29:
./OMCppBuildingSystems_BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DTriangularWallsInitialize.cpp:10070:7: error: no matching function for call to object of type 'StatArrayDim1<double, 1, true>'
      _wall11_P_construction_P_layer2_P_dx_(2,i_) = _wall11_P_construction_P_layer2_P_lengthX_;
      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1117:20: note: candidate function not viable: requires single argument 'idx', but 2 arguments were provided
  virtual const T& operator()(const vector<size_t>& idx) const
                   ^
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1126:14: note: candidate function not viable: requires single argument 'idx', but 2 arguments were provided
  virtual T& operator()(const vector<size_t>& idx)
             ^
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1135:21: note: candidate function not viable: requires single argument 'index', but 2 arguments were provided
  inline virtual T& operator()(size_t index)
                    ^
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1144:27: note: candidate function not viable: requires single argument 'index', but 2 arguments were provided
  inline virtual const T& operator()(size_t index) const
                          ^
In file included from OMCppBuildingSystems_BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DTriangularWallsCalcHelperMain.cpp:29:
./OMCppBuildingSystems_BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DTriangularWallsInitialize.cpp:10072:7: error: no matching function for call to object of type 'StatArrayDim1<double, 1, true>'
      _wall11_P_construction_P_layer2_P_C_(2,i_) = ((((_wall11_P_construction_P_layer2_P_material_P_c_ * _wall11_P_construction_P_layer2_P_material_P_rho_) * _wall11_P_construction_P_layer2_P_dx_(2,i_)) * _wall11_P_construction_P_layer2_P_lengthY_) * _wall11_P_construction_P_layer2_P_lengthZ_);
      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1117:20: note: candidate function not viable: requires single argument 'idx', but 2 arguments were provided
  virtual const T& operator()(const vector<size_t>& idx) const
                   ^
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1126:14: note: candidate function not viable: requires single argument 'idx', but 2 arguments were provided
  virtual T& operator()(const vector<size_t>& idx)
             ^
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1135:21: note: candidate function not viable: requires single argument 'index', but 2 arguments were provided
  inline virtual T& operator()(size_t index)
                    ^
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1144:27: note: candidate function not viable: requires single argument 'index', but 2 arguments were provided
  inline virtual const T& operator()(size_t index) const
                          ^
In file included from OMCppBuildingSystems_BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DTriangularWallsCalcHelperMain.cpp:29:
./OMCppBuildingSystems_BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DTriangularWallsInitialize.cpp:10072:159: error: no matching function for call to object of type 'StatArrayDim1<double, 1, true>'
      _wall11_P_construction_P_layer2_P_C_(2,i_) = ((((_wall11_P_construction_P_layer2_P_material_P_c_ * _wall11_P_construction_P_layer2_P_material_P_rho_) * _wall11_P_construction_P_layer2_P_dx_(2,i_)) * _wall11_P_construction_P_layer2_P_lengthY_) * _wall11_P_construction_P_layer2_P_lengthZ_);
                                                                                                                                                              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1117:20: note: candidate function not viable: requires single argument 'idx', but 2 arguments were provided
  virtual const T& operator()(const vector<size_t>& idx) const
                   ^
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1126:14: note: candidate function not viable: requires single argument 'idx', but 2 arguments were provided
  virtual T& operator()(const vector<size_t>& idx)
             ^
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1135:21: note: candidate function not viable: requires single argument 'index', but 2 arguments were provided
  inline virtual T& operator()(size_t index)
                    ^
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1144:27: note: candidate function not viable: requires single argument 'index', but 2 arguments were provided
  inline virtual const T& operator()(size_t index) const
                          ^
In file included from OMCppBuildingSystems_BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DTriangularWallsCalcHelperMain.cpp:29:
./OMCppBuildingSystems_BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DTriangularWallsInitialize.cpp:10093:11: error: no matching function for call to object of type 'StatArrayDim1<double, 2, true>'
          _wall11_P_construction_P_layer2_P_CTh_(2,i_) = ((division(_wall11_P_construction_P_layer2_P_material_P_lambda_,_wall11_P_construction_P_layer2_P_dx_(2,i_),!_initial,"wall11.construction.layer[2].dx[i]") * _wall11_P_construction_P_layer2_P_lengthY_) * _wall11_P_construction_P_layer2_P_lengthZ_);
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1117:20: note: candidate function not viable: requires single argument 'idx', but 2 arguments were provided
  virtual const T& operator()(const vector<size_t>& idx) const
                   ^
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1126:14: note: candidate function not viable: requires single argument 'idx', but 2 arguments were provided
  virtual T& operator()(const vector<size_t>& idx)
             ^
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1135:21: note: candidate function not viable: requires single argument 'index', but 2 arguments were provided
  inline virtual T& operator()(size_t index)
                    ^
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1144:27: note: candidate function not viable: requires single argument 'index', but 2 arguments were provided
  inline virtual const T& operator()(size_t index) const
                          ^
In file included from OMCppBuildingSystems_BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DTriangularWallsCalcHelperMain.cpp:29:
./OMCppBuildingSystems_BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DTriangularWallsInitialize.cpp:10093:122: error: no matching function for call to object of type 'StatArrayDim1<double, 1, true>'
          _wall11_P_construction_P_layer2_P_CTh_(2,i_) = ((division(_wall11_P_construction_P_layer2_P_material_P_lambda_,_wall11_P_construction_P_layer2_P_dx_(2,i_),!_initial,"wall11.construction.layer[2].dx[i]") * _wall11_P_construction_P_layer2_P_lengthY_) * _wall11_P_construction_P_layer2_P_lengthZ_);
                                                                                                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1117:20: note: candidate function not viable: requires single argument 'idx', but 2 arguments were provided
  virtual const T& operator()(const vector<size_t>& idx) const
                   ^
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1126:14: note: candidate function not viable: requires single argument 'idx', but 2 arguments were provided
  virtual T& operator()(const vector<size_t>& idx)
             ^
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1135:21: note: candidate function not viable: requires single argument 'index', but 2 arguments were provided
  inline virtual T& operator()(size_t index)
                    ^
/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/Core/Math/Array.h:1144:27: note: candidate function not viable: requires single argument 'index', but 2 arguments were provided
  inline virtual const T& operator()(size_t index) const
                          ^
fatal error: too many errors emitted, stopping now [-ferror-limit=]
20 errors generated.
make: *** [<builtin>: OMCppBuildingSystems_BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DTriangularWallsCalcHelperMain.o] Error 1
[Calling os._exit(0), Time elapsed: 60.68485914799385]
Failed to read output from testmodel.py, exit status != 0:
54.70533221610822 54.715640614 53.523657238
Calling exit ...
<OMPython.OMCSessionZMQ object at 0x7f22c6f6ece0>