Running: ./testmodel.py --libraries=/home/hudson/saved_omc/libraries/.openmodelica/libraries --ompython_omhome=/usr ThermoSysPro_ThermoSysPro.Examples.Book.SimpleExamples.Volume.TestStaticDrum3.conf.json
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.0.0-master/package.mo", uses=false) [Timeout 180]
"Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.0.0-master/package.mo): time 0.7647/0.7647, allocations: 152.6 MB / 169.6 MB, free: 15.12 MB / 142.1 MB
"
[Timeout remaining time 179]
Using package ThermoSysPro with version 4.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.0.0-master/package.mo)
Running command: translateModel(ThermoSysPro.Examples.Book.SimpleExamples.Volume.TestStaticDrum3,tolerance=1e-06,outputFormat="empty",numberOfIntervals=2500,variableFilter="",fileNamePrefix="ThermoSysPro_ThermoSysPro.Examples.Book.SimpleExamples.Volume.TestStaticDrum3")
translateModel(ThermoSysPro.Examples.Book.SimpleExamples.Volume.TestStaticDrum3,tolerance=1e-06,outputFormat="empty",numberOfIntervals=2500,variableFilter="",fileNamePrefix="ThermoSysPro_ThermoSysPro.Examples.Book.SimpleExamples.Volume.TestStaticDrum3") [Timeout 660]
"Notification: Performance of FrontEnd - loaded program: time 0.0004524/0.0004524, allocations: 15.34 kB / 245.6 MB, free: 15.77 MB / 206.1 MB
Notification: Performance of FrontEnd - Absyn->SCode: time 0.04983/0.05029, allocations: 33.06 MB / 278.6 MB, free: 0.8047 MB / 222.1 MB
Notification: Automatically loaded package Complex 4.0.0 due to uses annotation from Modelica.
Notification: Automatically loaded package ModelicaServices 4.0.0 due to uses annotation from Modelica.
Notification: Automatically loaded package Modelica 4.0.0 due to usage.
Notification: Performance of NFInst.instantiate(ThermoSysPro.Examples.Book.SimpleExamples.Volume.TestStaticDrum3): time 1.537/1.587, allocations: 305.3 MB / 0.5702 GB, free: 14.48 MB / 462.1 MB
Notification: Performance of NFInst.instExpressions: time 0.4407/2.028, allocations: 190.3 MB / 0.756 GB, free: 14.83 MB / 0.5919 GB
Notification: Performance of NFInst.updateImplicitVariability: time 0.0007077/2.028, allocations: 12.53 kB / 0.756 GB, free: 14.83 MB / 0.5919 GB
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.0.0-master/WaterSteam/Junctions/StaticDrum.mo:11:3-13:24:writable] Warning: Connector Ce_eva is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.0.0-master/WaterSteam/Junctions/StaticDrum.mo:14:3-16:24:writable] Warning: Connector Ce_eco is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.0.0-master/WaterSteam/Junctions/StaticDrum.mo:17:3-18:82:writable] Warning: Connector Cs_sup is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.0.0-master/WaterSteam/Junctions/StaticDrum.mo:19:3-21:17:writable] Warning: Connector Cs_eva is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.0.0-master/WaterSteam/Junctions/StaticDrum.mo:22:3-23:82:writable] Warning: Connector Cs_sur is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.0.0-master/WaterSteam/Junctions/StaticDrum.mo:24:3-26:17:writable] Warning: Connector Cs_purg is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.0.0-master/WaterSteam/Junctions/StaticDrum.mo:27:3-29:17:writable] Warning: Connector Ce_steam is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.0.0-master/WaterSteam/Junctions/StaticDrum.mo:30:3-32:17:writable] Warning: Connector Ce_sup is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.0.0-master/WaterSteam/PressureLosses/SingularPressureLoss.mo:25:3-27:16:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.0.0-master/WaterSteam/PressureLosses/SingularPressureLoss.mo:28:3-29:52:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.0.0-master/WaterSteam/PressureLosses/SingularPressureLoss.mo:25:3-27:16:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.0.0-master/WaterSteam/PressureLosses/SingularPressureLoss.mo:28:3-29:52:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.0.0-master/WaterSteam/BoundaryConditions/SinkQ.mo:24:3-26:16:writable] Warning: Connector C is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.0.0-master/WaterSteam/BoundaryConditions/SourcePQ.mo:29:3-30:52:writable] Warning: Connector C is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.0.0-master/Thermal/BoundaryConditions/HeatSink.mo:11:3-13:67:writable] Warning: Connector C is not balanced: The number of potential variables (0) is not equal to the number of flow variables (1).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.0.0-master/WaterSteam/PressureLosses/SingularPressureLoss.mo:25:3-27:16:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.0.0-master/WaterSteam/PressureLosses/SingularPressureLoss.mo:28:3-29:52:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.0.0-master/WaterSteam/BoundaryConditions/Sink.mo:17:3-19:16:writable] Warning: Connector C is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.0.0-master/WaterSteam/HeatExchangers/DynamicTwoPhaseFlowPipe.mo:184:3-185:48:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.0.0-master/WaterSteam/HeatExchangers/DynamicTwoPhaseFlowPipe.mo:188:3-189:46:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.0.0-master/WaterSteam/PressureLosses/LumpedStraightPipe.mo:49:3-50:42:writable] Warning: Connector C1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.0.0-master/WaterSteam/PressureLosses/LumpedStraightPipe.mo:51:3-53:37:writable] Warning: Connector C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.0.0-master/WaterSteam/Volumes/VolumeA.mo:25:3-27:42:writable] Warning: Connector Ce1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.0.0-master/WaterSteam/Volumes/VolumeA.mo:28:3-30:37:writable] Warning: Connector Ce2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.0.0-master/WaterSteam/Volumes/VolumeA.mo:31:3-33:37:writable] Warning: Connector Cs1 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.0.0-master/WaterSteam/Volumes/VolumeA.mo:38:3-40:43:writable] Warning: Connector Cs2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
Notification: Performance of NFTyping.typeComponents: time 0.000786/2.029, allocations: 369.7 kB / 0.7564 GB, free: 14.77 MB / 0.5919 GB
Notification: Performance of NFTyping.typeBindings: time 0.00111/2.03, allocations: 0.763 MB / 0.7571 GB, free: 14.55 MB / 0.5919 GB
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.0.0-master/Properties/WaterSteam/IF97_packages.mo:783:9-783:27:writable] Warning: cv was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.0.0-master/Properties/WaterSteam/IF97_packages.mo:850:9-850:27:writable] Warning: cv was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.0.0-master/Properties/WaterSteam/IF97_packages.mo:1088:9-1088:27:writable] Warning: cv was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.0.0-master/Properties/WaterSteamSimple/prop4_Ph.mo:69:3-69:60:writable] Warning: dh1satp was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.0.0-master/Properties/WaterSteamSimple/prop4_Ph.mo:69:3-69:60:writable] Warning: dh2satp was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.0.0-master/Properties/WaterSteamSimple/prop4_Ph_der.mo:167:3-170:49:writable] Warning: du1satp_der was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.0.0-master/Properties/WaterSteamSimple/prop4_Ph_der.mo:167:3-170:49:writable] Warning: du2satp_der was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed.
Notification: Performance of NFTyping.typeClassSections: time 0.02505/2.055, allocations: 12.44 MB / 0.7693 GB, free: 11.83 MB / 0.5919 GB
Notification: Performance of NFFlatten.flatten: time 0.006801/2.062, allocations: 9.192 MB / 0.7782 GB, free: 9.43 MB / 0.5919 GB
Notification: Performance of NFFlatten.resolveConnections: time 0.00297/2.065, allocations: 2.773 MB / 0.781 GB, free: 8.301 MB / 0.5919 GB
Notification: Performance of NFEvalConstants.evaluate: time 0.003125/2.068, allocations: 3.116 MB / 0.784 GB, free: 7.617 MB / 0.5919 GB
Notification: Performance of NFSimplifyModel.simplify: time 0.004574/2.073, allocations: 3.505 MB / 0.7874 GB, free: 6.418 MB / 0.5919 GB
Notification: Performance of NFPackage.collectConstants: time 0.0009818/2.074, allocations: 0.5375 MB / 0.7879 GB, free: 6.418 MB / 0.5919 GB
Notification: Performance of NFFlatten.collectFunctions: time 0.03434/2.108, allocations: 18.68 MB / 0.8062 GB, free: 8.363 MB / 0.6075 GB
Notification: Performance of NFScalarize.scalarize: time 0.003254/2.111, allocations: 2.02 MB / 0.8082 GB, free: 6.391 MB / 0.6075 GB
Notification: Performance of NFVerifyModel.verify: time 0.004769/2.116, allocations: 2.838 MB / 0.8109 GB, free: 3.598 MB / 0.6075 GB
Notification: Performance of NFConvertDAE.convert: time 0.02803/2.144, allocations: 15.79 MB / 0.8263 GB, free: 4.539 MB / 0.6231 GB
Notification: Performance of FrontEnd - DAE generated: time 5.761e-06/2.144, allocations: 0 / 0.8263 GB, free: 4.539 MB / 0.6231 GB
Notification: Performance of FrontEnd: time 1.152e-06/2.144, allocations: 0 / 0.8263 GB, free: 4.539 MB / 0.6231 GB
Notification: Performance of Transformations before backend: time 0.0001583/2.144, allocations: 0 / 0.8263 GB, free: 4.539 MB / 0.6231 GB
Notification: Model statistics after passing the front-end and creating the data structures used by the back-end:
 * Number of equations: 1367
 * Number of variables: 1367
Notification: Performance of Generate backend data structure: time 0.03141/2.176, allocations: 8.626 MB / 0.8348 GB, free: 11.84 MB / 0.6387 GB
Notification: Performance of prepare preOptimizeDAE: time 3.716e-05/2.176, allocations: 8.031 kB / 0.8348 GB, free: 11.83 MB / 0.6387 GB
Notification: Performance of preOpt normalInlineFunction (simulation): time 0.001247/2.177, allocations: 0.4984 MB / 0.8353 GB, free: 11.33 MB / 0.6387 GB
Notification: Performance of preOpt evaluateParameters (simulation): time 0.00322/2.18, allocations: 1.818 MB / 0.837 GB, free: 9.473 MB / 0.6387 GB
Notification: Performance of preOpt simplifyIfEquations (simulation): time 0.002126/2.182, allocations: 1.759 MB / 0.8388 GB, free: 7.453 MB / 0.6387 GB
Notification: Performance of preOpt expandDerOperator (simulation): time 0.0008474/2.183, allocations: 339.9 kB / 0.8391 GB, free: 7.121 MB / 0.6387 GB
Notification: Performance of preOpt clockPartitioning (simulation): time 0.02329/2.206, allocations: 9.381 MB / 0.8482 GB, free: 13.6 MB / 0.6544 GB
Notification: Performance of preOpt findStateOrder (simulation): time 7.298e-05/2.206, allocations: 0 / 0.8482 GB, free: 13.6 MB / 0.6544 GB
Notification: Performance of preOpt replaceEdgeChange (simulation): time 0.0007462/2.207, allocations: 139.9 kB / 0.8484 GB, free: 13.46 MB / 0.6544 GB
Notification: Performance of preOpt inlineArrayEqn (simulation): time 0.000144/2.207, allocations: 148.7 kB / 0.8485 GB, free: 13.32 MB / 0.6544 GB
Notification: Performance of preOpt removeEqualRHS (simulation): time 0.03371/2.241, allocations: 12.1 MB / 0.8603 GB, free: 1.207 MB / 0.6544 GB
Warning: The model contains alias variables with redundant start and/or conflicting nominal values. It is recommended to resolve the conflicts, because otherwise the system could be hard to solve. To print the conflicting alias sets and the chosen candidates please use -d=aliasConflicts.
Notification: Performance of preOpt removeSimpleEquations (simulation): time 0.05071/2.292, allocations: 29.58 MB / 0.8892 GB, free: 2.488 MB / 0.6856 GB
Notification: Performance of preOpt comSubExp (simulation): time 0.02585/2.318, allocations: 9.262 MB / 0.8983 GB, free: 9.199 MB / 0.7012 GB
Notification: Performance of preOpt resolveLoops (simulation): time 0.01825/2.336, allocations: 6.805 MB / 0.9049 GB, free: 2.375 MB / 0.7012 GB
Notification: Performance of preOpt evalFunc (simulation): time 0.4748/2.811, allocations: 154.9 MB / 1.056 GB, free: 395.4 MB / 0.8106 GB
Notification: Performance of preOpt encapsulateWhenConditions (simulation): time 9.225e-05/2.811, allocations: 83.8 kB / 1.056 GB, free: 395.3 MB / 0.8106 GB
Notification: Performance of pre-optimization done (n=1061): time 1.057e-05/2.811, allocations: 0 / 1.056 GB, free: 395.3 MB / 0.8106 GB
Notification: Performance of matching and sorting (n=1061): time 0.05422/2.865, allocations: 22.96 MB / 1.079 GB, free: 374.5 MB / 0.8106 GB
Notification: Performance of inlineWhenForInitialization (initialization): time 5.28e-05/2.865, allocations: 129.8 kB / 1.079 GB, free: 374.4 MB / 0.8106 GB
Notification: Performance of selectInitializationVariablesDAE (initialization): time 0.0008908/2.866, allocations: 0.8938 MB / 1.08 GB, free: 373.5 MB / 0.8106 GB
Notification: Performance of collectPreVariables (initialization): time 0.001197/2.867, allocations: 113.7 kB / 1.08 GB, free: 373.4 MB / 0.8106 GB
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermoSysPro 4.0.0-master/WaterSteam/PressureLosses/LumpedStraightPipe.mo:6:3-7:71:writable] Warning: The parameter lumpedStraightPipe.lambda has fixed = false and a binding equation lumpedStraightPipe.lambda = 0.03, which is probably redundant.
Setting fixed = false usually means there is an additional initial equation to determine the parameter value. The binding was ignored by old Modelica tools, but this is not according to the Modelica specification. Please remove the parameter binding, or bind the parameter to another parameter with fixed = false and no binding.
Notification: Performance of collectInitialEqns (initialization): time 0.0003218/2.867, allocations: 0.6595 MB / 1.08 GB, free: 372.8 MB / 0.8106 GB
Notification: Performance of collectInitialBindings (initialization): time 0.002616/2.87, allocations: 3.67 MB / 1.084 GB, free: 369.6 MB / 0.8106 GB
Notification: Performance of simplifyInitialFunctions (initialization): time 0.00353/2.874, allocations: 1.318 MB / 1.085 GB, free: 368.3 MB / 0.8106 GB
Notification: Performance of setup shared object (initialization): time 3.412e-05/2.874, allocations: 301.7 kB / 1.086 GB, free: 368 MB / 0.8106 GB
Notification: Performance of preBalanceInitialSystem (initialization): time 0.01372/2.887, allocations: 6.304 MB / 1.092 GB, free: 361.7 MB / 0.8106 GB
Notification: Performance of partitionIndependentBlocks (initialization): time 0.01463/2.902, allocations: 7.156 MB / 1.099 GB, free: 354.4 MB / 0.8106 GB
Notification: It was not possible to check the given initialization system for consistency symbolically, because the relevant equations are part of an algebraic loop. This is not supported yet.
Notification: Performance of analyzeInitialSystem (initialization): time 0.1425/3.044, allocations: 41.43 MB / 1.139 GB, free: 312.9 MB / 0.8106 GB
Notification: Performance of solveInitialSystemEqSystem (initialization): time 1.443e-05/3.044, allocations: 0 / 1.139 GB, free: 312.9 MB / 0.8106 GB
Notification: Performance of matching and sorting (n=1150) (initialization): time 0.04147/3.086, allocations: 17.79 MB / 1.157 GB, free: 295.1 MB / 0.8106 GB
Notification: Performance of prepare postOptimizeDAE: time 2.617e-05/3.086, allocations: 15.31 kB / 1.157 GB, free: 295.1 MB / 0.8106 GB
Notification: Performance of postOpt simplifyComplexFunction (initialization): time 6.511e-05/3.086, allocations: 33.39 kB / 1.157 GB, free: 295.1 MB / 0.8106 GB
Notification: Performance of postOpt tearingSystem (initialization): time 0.04261/3.129, allocations: 19.76 MB / 1.176 GB, free: 275.3 MB / 0.8106 GB
Notification: Performance of postOpt solveSimpleEquations (initialization): time 0.006406/3.135, allocations: 1.323 MB / 1.177 GB, free: 274 MB / 0.8106 GB
Notification: Performance of postOpt calculateStrongComponentJacobians (initialization): time 0.02186/3.157, allocations: 14.64 MB / 1.192 GB, free: 259.2 MB / 0.8106 GB
Notification: Performance of postOpt simplifyAllExpressions (initialization): time 0.00755/3.164, allocations: 1.524 MB / 1.193 GB, free: 257.8 MB / 0.8106 GB
Notification: Performance of postOpt collapseArrayExpressions (initialization): time 0.0009541/3.165, allocations: 285.8 kB / 1.193 GB, free: 257.5 MB / 0.8106 GB
Warning: The initial conditions are over specified. The following 1 initial equations are redundant, so they are removed from the initialization system:
         $DER.volumeA.h = 0.0.
Notification: Model statistics after passing the back-end for initialization:
 * Number of independent subsystems: 56
 * Number of states: 0 ()
 * Number of discrete variables: 30 (volumeA.Cs2.b,volumeA.Cs1.b,volumeA.Ce2.a,volumeA.Ce1.a,lumpedStraightPipe.C2.b,lumpedStraightPipe.C1.a,dynamicTwoPhaseFlowPipe.C2.b,dynamicTwoPhaseFlowPipe.C1.a,sink.C.a,singularPressureLossVALI3.C2.b,singularPressureLossVALI3.C1.a,sourcePQ.C.b,sinkQ.C.a,singularPressureLossVALI2.C2.b,singularPressureLossVALI2.C1.a,singularPressureLossVALI1.C2.b,singularPressureLossVALI1.C1.a,StaticDrumTh1.Ce_sup.a,StaticDrumTh1.Ce_steam.a,StaticDrumTh1.Cs_purg.b,StaticDrumTh1.Cs_sur.b,StaticDrumTh1.Cs_eva.b,StaticDrumTh1.Cs_sup.b,StaticDrumTh1.Ce_eco.a,StaticDrumTh1.Ce_eva.a,volumeA.Cs2.a,volumeA.Ce2.b,StaticDrumTh1.Cs_sup.a,StaticDrumTh1.Ce_sup.b,StaticDrumTh1.Ce_steam.b)
 * Number of discrete states: 0 ()
 * Number of clocked states: 0 ()
 * Top-level inputs: 0
Notification: Strong component statistics for initialization (367):
 * Single equations (assignments): 350
 * Array equations: 0
 * Algorithm blocks: 0
 * Record equations: 13
 * When equations: 0
 * If-equations: 0
 * Equation systems (not torn): 0
 * Torn equation systems: 4
 * Mixed (continuous/discrete) equation systems: 0
Notification: Torn system details for strict tearing set:
 * Linear torn systems (#iteration vars, #inner vars, density): 0 systems
 * Non-linear torn systems (#iteration vars, #inner vars): 4 systems
   {(1,3), (24,211), (1,3), (1,5)}
Notification: Performance of prepare postOptimizeDAE: time 0.002413/3.168, allocations: 1.162 MB / 1.194 GB, free: 256.4 MB / 0.8106 GB
Notification: Performance of postOpt lateInlineFunction (simulation): time 0.001053/3.169, allocations: 387 kB / 1.195 GB, free: 256 MB / 0.8106 GB
Notification: Performance of postOpt wrapFunctionCalls (simulation): time 0.03391/3.203, allocations: 18.73 MB / 1.213 GB, free: 237.3 MB / 0.8106 GB
Notification: Performance of postOpt inlineArrayEqn (simulation): time 0.02999/3.233, allocations: 16.23 MB / 1.229 GB, free: 220.9 MB / 0.8106 GB
Notification: Performance of postOpt constantLinearSystem (simulation): time 2.566e-05/3.233, allocations: 7.281 kB / 1.229 GB, free: 220.9 MB / 0.8106 GB
Notification: Performance of postOpt simplifysemiLinear (simulation): time 5.417e-05/3.233, allocations: 39.84 kB / 1.229 GB, free: 220.9 MB / 0.8106 GB
Notification: Performance of postOpt removeSimpleEquations (simulation): time 0.05094/3.284, allocations: 28.83 MB / 1.257 GB, free: 192.3 MB / 0.8106 GB
Notification: Performance of postOpt simplifyComplexFunction (simulation): time 5.728e-05/3.284, allocations: 27.92 kB / 1.257 GB, free: 192.3 MB / 0.8106 GB
Notification: Performance of postOpt solveSimpleEquations (simulation): time 0.01687/3.301, allocations: 3.509 MB / 1.261 GB, free: 188.8 MB / 0.8106 GB
Notification: Performance of postOpt tearingSystem (simulation): time 0.002631/3.303, allocations: 1.27 MB / 1.262 GB, free: 187.5 MB / 0.8106 GB
Notification: Performance of postOpt inputDerivativesUsed (simulation): time 0.0009589/3.304, allocations: 279.6 kB / 1.262 GB, free: 187.2 MB / 0.8106 GB
Notification: Performance of postOpt calculateStrongComponentJacobians (simulation): time 0.009379/3.314, allocations: 18.15 MB / 1.28 GB, free: 167.7 MB / 0.8106 GB
Notification: Performance of postOpt calculateStateSetsJacobians (simulation): time 2.435e-06/3.314, allocations: 5.812 kB / 1.28 GB, free: 167.7 MB / 0.8106 GB
Notification: Performance of postOpt symbolicJacobian (simulation): time 0.04666/3.36, allocations: 25.38 MB / 1.305 GB, free: 142.2 MB / 0.8106 GB
Notification: Performance of postOpt removeConstants (simulation): time 0.002656/3.363, allocations: 1.713 MB / 1.306 GB, free: 140.5 MB / 0.8106 GB
Notification: Performance of postOpt simplifyTimeIndepFuncCalls (simulation): time 0.0008327/3.364, allocations: 158.6 kB / 1.306 GB, free: 140.3 MB / 0.8106 GB
Notification: Performance of postOpt simplifyAllExpressions (simulation): time 0.006886/3.371, allocations: 1.065 MB / 1.307 GB, free: 139.2 MB / 0.8106 GB
Notification: Performance of postOpt findZeroCrossings (simulation): time 0.001002/3.372, allocations: 0.521 MB / 1.308 GB, free: 138.7 MB / 0.8106 GB
Notification: Performance of postOpt collapseArrayExpressions (simulation): time 0.0006338/3.372, allocations: 307.2 kB / 1.308 GB, free: 138.4 MB / 0.8106 GB
Notification: Performance of sorting global known variables: time 0.000531/3.373, allocations: 0.5849 MB / 1.309 GB, free: 137.8 MB / 0.8106 GB
Notification: Performance of sort global known variables: time 9e-08/3.373, allocations: 0 / 1.309 GB, free: 137.8 MB / 0.8106 GB
Notification: Performance of remove unused functions: time 0.006112/3.379, allocations: 3.16 MB / 1.312 GB, free: 134.7 MB / 0.8106 GB
Notification: Model statistics after passing the back-end for simulation:
 * Number of independent subsystems: 2
 * Number of states: 32 (dynamicTwoPhaseFlowPipe.P[2],dynamicTwoPhaseFlowPipe.P[3],dynamicTwoPhaseFlowPipe.P[4],dynamicTwoPhaseFlowPipe.P[5],dynamicTwoPhaseFlowPipe.P[6],dynamicTwoPhaseFlowPipe.P[7],dynamicTwoPhaseFlowPipe.P[8],dynamicTwoPhaseFlowPipe.P[9],dynamicTwoPhaseFlowPipe.P[10],dynamicTwoPhaseFlowPipe.P[11],dynamicTwoPhaseFlowPipe.Q[1],dynamicTwoPhaseFlowPipe.Q[2],dynamicTwoPhaseFlowPipe.Q[3],dynamicTwoPhaseFlowPipe.Q[4],dynamicTwoPhaseFlowPipe.Q[5],dynamicTwoPhaseFlowPipe.Q[6],dynamicTwoPhaseFlowPipe.Q[7],dynamicTwoPhaseFlowPipe.Q[8],dynamicTwoPhaseFlowPipe.Q[9],dynamicTwoPhaseFlowPipe.Q[10],dynamicTwoPhaseFlowPipe.Q[11],dynamicTwoPhaseFlowPipe.h[2],dynamicTwoPhaseFlowPipe.h[3],dynamicTwoPhaseFlowPipe.h[4],dynamicTwoPhaseFlowPipe.h[5],dynamicTwoPhaseFlowPipe.h[6],dynamicTwoPhaseFlowPipe.h[7],dynamicTwoPhaseFlowPipe.h[8],dynamicTwoPhaseFlowPipe.h[9],dynamicTwoPhaseFlowPipe.h[10],dynamicTwoPhaseFlowPipe.h[11],volumeA.h)
 * Number of discrete variables: 0 ()
 * Number of discrete states: 0 ()
 * Number of clocked states: 0 ()
 * Top-level inputs: 0
Notification: Strong component statistics for simulation (792):
 * Single equations (assignments): 733
 * Array equations: 0
 * Algorithm blocks: 0
 * Record equations: 45
 * When equations: 0
 * If-equations: 0
 * Equation systems (not torn): 0
 * Torn equation systems: 14
 * Mixed (continuous/discrete) equation systems: 0
Notification: Torn system details for strict tearing set:
 * Linear torn systems (#iteration vars, #inner vars, density): 10 systems
   {(1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%)}
 * Non-linear torn systems (#iteration vars, #inner vars): 4 systems
   {(1,4), (1,3), (1,3), (1,5)}
Notification: Performance of Backend phase and start with SimCode phase: time 0.006066/3.385, allocations: 2.415 MB / 1.314 GB, free: 132.6 MB / 0.8106 GB
Notification: Performance of simCode: created initialization part: time 0.03807/3.423, allocations: 18.77 MB / 1.333 GB, free: 113.2 MB / 0.8106 GB
Notification: Performance of simCode: created event and clocks part: time 4.088e-06/3.423, allocations: 0 / 1.333 GB, free: 113.2 MB / 0.8106 GB
Notification: Performance of simCode: created simulation system equations: time 0.01863/3.442, allocations: 10.23 MB / 1.343 GB, free: 102.8 MB / 0.8106 GB
Notification: Performance of simCode: created of all other equations (e.g. parameter, nominal, assert, etc): time 0.008484/3.45, allocations: 2.02 MB / 1.345 GB, free: 101.1 MB / 0.8106 GB
Notification: Performance of simCode: created linear, non-linear and system jacobian parts: time 0.0502/3.5, allocations: 22.69 MB / 1.367 GB, free: 78.55 MB / 0.8106 GB
Notification: Performance of simCode: some other stuff during SimCode phase: time 0.001989/3.502, allocations: 3.45 MB / 1.37 GB, free: 75.07 MB / 0.8106 GB
Notification: Performance of simCode: all other stuff during SimCode phase: time 0.003728/3.506, allocations: 0.6393 MB / 1.371 GB, free: 74.43 MB / 0.8106 GB
Notification: Performance of SimCode: time 9.72e-07/3.506, allocations: 0 / 1.371 GB, free: 74.43 MB / 0.8106 GB
Notification: Performance of Templates: time 0.3535/3.86, allocations: 288.1 MB / 1.652 GB, free: 216 MB / 0.8106 GB
"
[Timeout remaining time 656]
make -j1 -f ThermoSysPro_ThermoSysPro.Examples.Book.SimpleExamples.Volume.TestStaticDrum3.makefile [Timeout 660]
make -j1 -f ThermoSysPro_ThermoSysPro.Examples.Book.SimpleExamples.Volume.TestStaticDrum3.makefile clang++ -std=c++17  -fopenmp=libomp  -Winvalid-pch -O2 -g -DNDEBUG -fPIC   -std=c++11 -DBOOST_ALL_DYN_LINK   -DUSE_DGESV -DUSE_LOGGER -DOMC_BUILD -DUSE_THREAD -DSUNDIALS_MAJOR_VERSION=5 -DSUNDIALS_MINOR_VERSION=4 -DPMC_USE_SUNDIALS -I"." -I"/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork_2/OpenModelica/OMCompiler/build/bin/../include/omc/cpp/" -I. "-I/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.0.0+maint.om/Resources/C-Sources" -I"." -I"." -I"/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork_2/OpenModelica/OMCompiler/build/include/omc/sundials" "-I/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.0.0+maint.om/Resources/C-Sources"    -DMEASURETIME_PROFILEBLOCKS -DUSE_LOGGER  -c -o OMCppThermoSysPro_ThermoSysPro.Examples.Book.SimpleExamples.Volume.TestStaticDrum3CalcHelperMain.o OMCppThermoSysPro_ThermoSysPro.Examples.Book.SimpleExamples.Volume.TestStaticDrum3CalcHelperMain.cpp
In file included from OMCppThermoSysPro_ThermoSysPro.Examples.Book.SimpleExamples.Volume.TestStaticDrum3CalcHelperMain.cpp:25:
In file included from ./OMCppThermoSysPro_ThermoSysPro.Examples.Book.SimpleExamples.Volume.TestStaticDrum3AlgLoopMain.cpp:60:
./OMCppThermoSysPro_ThermoSysPro.Examples.Book.SimpleExamples.Volume.TestStaticDrum3Algloop592.cpp:271:3: error: use of undeclared identifier '_dynamicTwoPhaseFlowPipe_P_lsat2_P_P_'
  _dynamicTwoPhaseFlowPipe_P_lsat2_P_P_ = get<0>(tmp618.data).P_;
  ^
./OMCppThermoSysPro_ThermoSysPro.Examples.Book.SimpleExamples.Volume.TestStaticDrum3Algloop592.cpp:272:3: error: use of undeclared identifier '_dynamicTwoPhaseFlowPipe_P_lsat2_P_T_'
  _dynamicTwoPhaseFlowPipe_P_lsat2_P_T_ = get<0>(tmp618.data).T_;
  ^
./OMCppThermoSysPro_ThermoSysPro.Examples.Book.SimpleExamples.Volume.TestStaticDrum3Algloop592.cpp:273:3: error: use of undeclared identifier '_dynamicTwoPhaseFlowPipe_P_lsat2_P_rho_'
  _dynamicTwoPhaseFlowPipe_P_lsat2_P_rho_ = get<0>(tmp618.data).rho_;
  ^
./OMCppThermoSysPro_ThermoSysPro.Examples.Book.SimpleExamples.Volume.TestStaticDrum3Algloop592.cpp:274:3: error: use of undeclared identifier '_dynamicTwoPhaseFlowPipe_P_lsat2_P_h_'
  _dynamicTwoPhaseFlowPipe_P_lsat2_P_h_ = get<0>(tmp618.data).h_;
  ^
./OMCppThermoSysPro_ThermoSysPro.Examples.Book.SimpleExamples.Volume.TestStaticDrum3Algloop592.cpp:275:3: error: use of undeclared identifier '_dynamicTwoPhaseFlowPipe_P_lsat2_P_cp_'
  _dynamicTwoPhaseFlowPipe_P_lsat2_P_cp_ = get<0>(tmp618.data).cp_;
  ^
./OMCppThermoSysPro_ThermoSysPro.Examples.Book.SimpleExamples.Volume.TestStaticDrum3Algloop592.cpp:276:3: error: use of undeclared identifier '_dynamicTwoPhaseFlowPipe_P_lsat2_P_pt_'
  _dynamicTwoPhaseFlowPipe_P_lsat2_P_pt_ = get<0>(tmp618.data).pt_;
  ^
./OMCppThermoSysPro_ThermoSysPro.Examples.Book.SimpleExamples.Volume.TestStaticDrum3Algloop592.cpp:277:3: error: use of undeclared identifier '_dynamicTwoPhaseFlowPipe_P_lsat2_P_cv_'
  _dynamicTwoPhaseFlowPipe_P_lsat2_P_cv_ = get<0>(tmp618.data).cv_;
  ^
./OMCppThermoSysPro_ThermoSysPro.Examples.Book.SimpleExamples.Volume.TestStaticDrum3Algloop592.cpp:278:3: error: use of undeclared identifier '_dynamicTwoPhaseFlowPipe_P_vsat2_P_P_'
  _dynamicTwoPhaseFlowPipe_P_vsat2_P_P_ = get<1>(tmp618.data).P_;
  ^
./OMCppThermoSysPro_ThermoSysPro.Examples.Book.SimpleExamples.Volume.TestStaticDrum3Algloop592.cpp:279:3: error: use of undeclared identifier '_dynamicTwoPhaseFlowPipe_P_vsat2_P_T_'
  _dynamicTwoPhaseFlowPipe_P_vsat2_P_T_ = get<1>(tmp618.data).T_;
  ^
./OMCppThermoSysPro_ThermoSysPro.Examples.Book.SimpleExamples.Volume.TestStaticDrum3Algloop592.cpp:280:3: error: use of undeclared identifier '_dynamicTwoPhaseFlowPipe_P_vsat2_P_rho_'
  _dynamicTwoPhaseFlowPipe_P_vsat2_P_rho_ = get<1>(tmp618.data).rho_;
  ^
./OMCppThermoSysPro_ThermoSysPro.Examples.Book.SimpleExamples.Volume.TestStaticDrum3Algloop592.cpp:281:3: error: use of undeclared identifier '_dynamicTwoPhaseFlowPipe_P_vsat2_P_h_'
  _dynamicTwoPhaseFlowPipe_P_vsat2_P_h_ = get<1>(tmp618.data).h_;
  ^
./OMCppThermoSysPro_ThermoSysPro.Examples.Book.SimpleExamples.Volume.TestStaticDrum3Algloop592.cpp:282:3: error: use of undeclared identifier '_dynamicTwoPhaseFlowPipe_P_vsat2_P_cp_'
  _dynamicTwoPhaseFlowPipe_P_vsat2_P_cp_ = get<1>(tmp618.data).cp_;
  ^
./OMCppThermoSysPro_ThermoSysPro.Examples.Book.SimpleExamples.Volume.TestStaticDrum3Algloop592.cpp:283:3: error: use of undeclared identifier '_dynamicTwoPhaseFlowPipe_P_vsat2_P_pt_'
  _dynamicTwoPhaseFlowPipe_P_vsat2_P_pt_ = get<1>(tmp618.data).pt_;
  ^
./OMCppThermoSysPro_ThermoSysPro.Examples.Book.SimpleExamples.Volume.TestStaticDrum3Algloop592.cpp:284:3: error: use of undeclared identifier '_dynamicTwoPhaseFlowPipe_P_vsat2_P_cv_'
  _dynamicTwoPhaseFlowPipe_P_vsat2_P_cv_ = get<1>(tmp618.data).cv_;
  ^
./OMCppThermoSysPro_ThermoSysPro.Examples.Book.SimpleExamples.Volume.TestStaticDrum3Algloop592.cpp:290:3: error: use of undeclared identifier '_dynamicTwoPhaseFlowPipe_P_lsat2_P_P_'
  _dynamicTwoPhaseFlowPipe_P_lsat2_P_P_ = get<0>(tmp619.data).P_;
  ^
./OMCppThermoSysPro_ThermoSysPro.Examples.Book.SimpleExamples.Volume.TestStaticDrum3Algloop592.cpp:291:3: error: use of undeclared identifier '_dynamicTwoPhaseFlowPipe_P_lsat2_P_T_'
  _dynamicTwoPhaseFlowPipe_P_lsat2_P_T_ = get<0>(tmp619.data).T_;
  ^
./OMCppThermoSysPro_ThermoSysPro.Examples.Book.SimpleExamples.Volume.TestStaticDrum3Algloop592.cpp:292:3: error: use of undeclared identifier '_dynamicTwoPhaseFlowPipe_P_lsat2_P_rho_'
  _dynamicTwoPhaseFlowPipe_P_lsat2_P_rho_ = get<0>(tmp619.data).rho_;
  ^
./OMCppThermoSysPro_ThermoSysPro.Examples.Book.SimpleExamples.Volume.TestStaticDrum3Algloop592.cpp:293:3: error: use of undeclared identifier '_dynamicTwoPhaseFlowPipe_P_lsat2_P_h_'
  _dynamicTwoPhaseFlowPipe_P_lsat2_P_h_ = get<0>(tmp619.data).h_;
  ^
./OMCppThermoSysPro_ThermoSysPro.Examples.Book.SimpleExamples.Volume.TestStaticDrum3Algloop592.cpp:294:3: error: use of undeclared identifier '_dynamicTwoPhaseFlowPipe_P_lsat2_P_cp_'
  _dynamicTwoPhaseFlowPipe_P_lsat2_P_cp_ = get<0>(tmp619.data).cp_;
  ^
fatal error: too many errors emitted, stopping now [-ferror-limit=]
20 errors generated.
make: *** [<builtin>: OMCppThermoSysPro_ThermoSysPro.Examples.Book.SimpleExamples.Volume.TestStaticDrum3CalcHelperMain.o] Error 1
[Calling os._exit(0), Time elapsed: 7.367844940163195]
Failed to read output from testmodel.py, exit status != 0:
3.973788679111749 3.981640133 1.83562249
Calling exit ...
<OMPython.OMCSessionZMQ object at 0x7fb26b0a2050>