Running: ./testmodel.py --libraries=/home/hudson/saved_omc/libraries/.openmodelica/libraries --ompython_omhome=/usr ThermofluidStream_dev_ThermofluidStream.Examples.VaporCycle.conf.json
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.0.0+maint.om/package.mo", uses=false)
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.0.0+maint.om/package.mo", uses=false)
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.0.0+maint.om/package.mo", uses=false)
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermofluidStream 1.1.0-main/package.mo", uses=false)
Using package ThermofluidStream with version 1.1.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermofluidStream 1.1.0-main/package.mo)
Using package Modelica with version 4.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.0.0+maint.om/package.mo)
Using package Complex with version 4.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.0.0+maint.om/package.mo)
Using package ModelicaServices with version 4.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.0.0+maint.om/package.mo)
Running command: "" <> buildModelFMU(ThermofluidStream.Examples.VaporCycle,fileNamePrefix="ThermofluidStream_dev_ThermofluidStream_Examples_VaporCycle",fmuType="me",version="2.0",platforms={"static"})
"" <> buildModelFMU(ThermofluidStream.Examples.VaporCycle,fileNamePrefix="ThermofluidStream_dev_ThermofluidStream_Examples_VaporCycle",fmuType="me",version="2.0",platforms={"static"})
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.0.0+maint.om/package.mo): time 0.001629/0.001629, allocations: 108 kB / 15.61 MB, free: 148 kB / 14.72 MB
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.0.0+maint.om/package.mo): time 0.001771/0.001771, allocations: 196.2 kB / 16.53 MB, free: 6.656 MB / 14.72 MB
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.0.0+maint.om/package.mo): time 1.555/1.555, allocations: 222.9 MB / 240.2 MB, free: 4.402 MB / 190.1 MB
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermofluidStream 1.1.0-main/package.mo): time 0.741/0.741, allocations: 93.71 MB / 384.1 MB, free: 6.977 MB / 318.1 MB
Warning: Ignoring unknown experiment annotation option: __Dymola_Algorithm = "Dassl"
Notification: Performance of FrontEnd - loaded program: time 0.002296/0.002296, allocations: 85.23 kB / 463.5 MB, free: 22.02 MB / 350.1 MB
Notification: Performance of FrontEnd - Absyn->SCode: time 0.1379/0.1402, allocations: 68.26 MB / 0.5193 GB, free: 6.926 MB / 398.1 MB
Notification: Performance of NFInst.instantiate(ThermofluidStream.Examples.VaporCycle): time 0.6747/0.8149, allocations: 310.1 MB / 0.8221 GB, free: 3.602 MB / 0.6231 GB
Notification: Performance of NFInst.instExpressions: time 0.5656/1.381, allocations: 195.1 MB / 1.013 GB, free: 11.12 MB / 0.67 GB
Notification: Performance of NFInst.updateImplicitVariability: time 0.005133/1.386, allocations: 130.2 kB / 1.013 GB, free: 11.04 MB / 0.67 GB
Notification: Performance of NFTyping.typeComponents: time 0.007436/1.393, allocations: 2.443 MB / 1.015 GB, free: 9.273 MB / 0.67 GB
Notification: Performance of NFTyping.typeBindings: time 0.02155/1.415, allocations: 6.33 MB / 1.021 GB, free: 3.52 MB / 0.67 GB
Notification: Performance of NFTyping.typeClassSections: time 0.06342/1.478, allocations: 19.83 MB / 1.041 GB, free: 15.62 MB / 0.7012 GB
Notification: Performance of NFFlatten.flatten: time 0.01957/1.498, allocations: 16.92 MB / 1.057 GB, free: 14.63 MB / 0.7169 GB
Notification: Performance of NFFlatten.resolveConnections: time 0.00693/1.505, allocations: 4.248 MB / 1.061 GB, free: 10.3 MB / 0.7169 GB
Notification: Performance of NFEvalConstants.evaluate: time 0.0143/1.519, allocations: 7.015 MB / 1.068 GB, free: 3.262 MB / 0.7169 GB
Notification: Performance of NFSimplifyModel.simplify: time 0.01198/1.531, allocations: 6.687 MB / 1.075 GB, free: 12.55 MB / 0.7325 GB
Notification: Performance of NFPackage.collectConstants: time 0.004132/1.535, allocations: 1.129 MB / 1.076 GB, free: 11.42 MB / 0.7325 GB
Notification: Performance of NFFlatten.collectFunctions: time 0.1042/1.64, allocations: 42.49 MB / 1.117 GB, free: 0.8438 MB / 0.7637 GB
Notification: Performance of NFScalarize.scalarize: time 0.4449/2.085, allocations: 2.627 MB / 1.12 GB, free: 43.19 MB / 0.7637 GB
Notification: Performance of NFVerifyModel.verify: time 0.01799/2.103, allocations: 6.282 MB / 1.126 GB, free: 43.19 MB / 0.7637 GB
Notification: Performance of NFConvertDAE.convert: time 0.1777/2.28, allocations: 67.86 MB / 1.192 GB, free: 39.95 MB / 0.7637 GB
Notification: Performance of FrontEnd - DAE generated: time 7.744e-06/2.281, allocations: 0 / 1.192 GB, free: 39.95 MB / 0.7637 GB
Notification: Performance of FrontEnd: time 1.703e-06/2.281, allocations: 0 / 1.192 GB, free: 39.95 MB / 0.7637 GB
Notification: Performance of Transformations before backend: time 0.0005992/2.281, allocations: 0 / 1.192 GB, free: 39.95 MB / 0.7637 GB
Notification: Model statistics after passing the front-end and creating the data structures used by the back-end:
 * Number of equations: 2216
 * Number of variables: 2216
Notification: Performance of Generate backend data structure: time 0.08445/2.366, allocations: 16.51 MB / 1.208 GB, free: 28.06 MB / 0.7637 GB
Notification: Performance of prepare preOptimizeDAE: time 4.53e-05/2.366, allocations: 12.03 kB / 1.208 GB, free: 28.05 MB / 0.7637 GB
Notification: Performance of preOpt introduceOutputAliases (simulation): time 0.004784/2.37, allocations: 1.131 MB / 1.21 GB, free: 27.64 MB / 0.7637 GB
Notification: Performance of preOpt normalInlineFunction (simulation): time 0.01603/2.386, allocations: 2.232 MB / 1.212 GB, free: 26.01 MB / 0.7637 GB
Notification: Performance of preOpt evaluateParameters (simulation): time 0.01574/2.402, allocations: 6.221 MB / 1.218 GB, free: 22.43 MB / 0.7637 GB
Notification: Performance of preOpt simplifyIfEquations (simulation): time 0.0006551/2.403, allocations: 0.6624 MB / 1.218 GB, free: 22.04 MB / 0.7637 GB
Notification: Performance of preOpt expandDerOperator (simulation): time 0.003724/2.407, allocations: 0.819 MB / 1.219 GB, free: 21.5 MB / 0.7637 GB
Notification: Performance of preOpt clockPartitioning (simulation): time 0.02967/2.436, allocations: 13.22 MB / 1.232 GB, free: 13.77 MB / 0.7637 GB
Notification: Performance of preOpt findStateOrder (simulation): time 0.0002043/2.437, allocations: 2.812 kB / 1.232 GB, free: 13.77 MB / 0.7637 GB
Notification: Performance of preOpt replaceEdgeChange (simulation): time 0.002121/2.439, allocations: 331.2 kB / 1.233 GB, free: 13.7 MB / 0.7637 GB
Notification: Performance of preOpt inlineArrayEqn (simulation): time 0.0001737/2.439, allocations: 274.5 kB / 1.233 GB, free: 13.48 MB / 0.7637 GB
Notification: Performance of preOpt removeEqualRHS (simulation): time 0.03208/2.471, allocations: 13.67 MB / 1.246 GB, free: 3.758 MB / 0.7637 GB
Warning: The model contains alias variables with redundant start and/or conflicting nominal values. It is recommended to resolve the conflicts, because otherwise the system could be hard to solve. To print the conflicting alias sets and the chosen candidates please use -d=aliasConflicts.
Notification: Performance of preOpt removeSimpleEquations (simulation): time 0.09449/2.566, allocations: 53.33 MB / 1.298 GB, free: 5.488 MB / 0.8106 GB
Notification: Performance of preOpt comSubExp (simulation): time 0.02424/2.59, allocations: 9.725 MB / 1.308 GB, free: 12.63 MB / 0.8262 GB
Notification: Performance of preOpt resolveLoops (simulation): time 0.01636/2.606, allocations: 6.425 MB / 1.314 GB, free: 6.195 MB / 0.8262 GB
Notification: Performance of preOpt evalFunc (simulation): time 0.03615/2.642, allocations: 41.76 MB / 1.355 GB, free: 3.254 MB / 0.8731 GB
Notification: Performance of preOpt encapsulateWhenConditions (simulation): time 0.0002217/2.643, allocations: 120.6 kB / 1.355 GB, free: 3.125 MB / 0.8731 GB
Notification: Performance of pre-optimization done (n=894): time 1.788e-05/2.643, allocations: 0 / 1.355 GB, free: 3.125 MB / 0.8731 GB
Notification: Performance of matching and sorting (n=898): time 0.1336/2.776, allocations: 36.82 MB / 1.391 GB, free: 13.74 MB / 0.92 GB
Notification: Performance of inlineWhenForInitialization (initialization): time 0.000174/2.777, allocations: 231.9 kB / 1.391 GB, free: 13.48 MB / 0.92 GB
Notification: Performance of selectInitializationVariablesDAE (initialization): time 0.01364/2.79, allocations: 6.222 MB / 1.397 GB, free: 7.285 MB / 0.92 GB
Notification: Performance of collectPreVariables (initialization): time 0.002667/2.793, allocations: 161.7 kB / 1.397 GB, free: 7.121 MB / 0.92 GB
Notification: Performance of collectInitialEqns (initialization): time 0.004331/2.797, allocations: 4.011 MB / 1.401 GB, free: 3.09 MB / 0.92 GB
Notification: Performance of collectInitialBindings (initialization): time 0.004884/2.802, allocations: 2.988 MB / 1.404 GB, free: 128 kB / 0.92 GB
Notification: Performance of simplifyInitialFunctions (initialization): time 0.007216/2.809, allocations: 1.863 MB / 1.406 GB, free: 14.25 MB / 0.9356 GB
Notification: Performance of setup shared object (initialization): time 0.000122/2.81, allocations: 305.1 kB / 1.406 GB, free: 13.95 MB / 0.9356 GB
Notification: Performance of preBalanceInitialSystem (initialization): time 0.01359/2.823, allocations: 5.864 MB / 1.412 GB, free: 8.07 MB / 0.9356 GB
Notification: Performance of partitionIndependentBlocks (initialization): time 0.01642/2.84, allocations: 7.314 MB / 1.419 GB, free: 284 kB / 0.9356 GB
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[10].deltaE_system = $START.evaporator.thermalElementA[10].deltaE_system (0.0 = $START.evaporator.thermalElementA[10].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[9].deltaE_system = $START.evaporator.thermalElementA[9].deltaE_system (0.0 = $START.evaporator.thermalElementA[9].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[8].deltaE_system = $START.evaporator.thermalElementA[8].deltaE_system (0.0 = $START.evaporator.thermalElementA[8].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[7].deltaE_system = $START.evaporator.thermalElementA[7].deltaE_system (0.0 = $START.evaporator.thermalElementA[7].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[6].deltaE_system = $START.evaporator.thermalElementA[6].deltaE_system (0.0 = $START.evaporator.thermalElementA[6].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[5].deltaE_system = $START.evaporator.thermalElementA[5].deltaE_system (0.0 = $START.evaporator.thermalElementA[5].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[4].deltaE_system = $START.evaporator.thermalElementA[4].deltaE_system (0.0 = $START.evaporator.thermalElementA[4].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[3].deltaE_system = $START.evaporator.thermalElementA[3].deltaE_system (0.0 = $START.evaporator.thermalElementA[3].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[2].deltaE_system = $START.evaporator.thermalElementA[2].deltaE_system (0.0 = $START.evaporator.thermalElementA[2].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[1].deltaE_system = $START.evaporator.thermalElementA[1].deltaE_system (0.0 = $START.evaporator.thermalElementA[1].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[10].deltaE_system = $START.evaporator.thermalElementB[10].deltaE_system (0.0 = $START.evaporator.thermalElementB[10].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[9].deltaE_system = $START.evaporator.thermalElementB[9].deltaE_system (0.0 = $START.evaporator.thermalElementB[9].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[8].deltaE_system = $START.evaporator.thermalElementB[8].deltaE_system (0.0 = $START.evaporator.thermalElementB[8].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[7].deltaE_system = $START.evaporator.thermalElementB[7].deltaE_system (0.0 = $START.evaporator.thermalElementB[7].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[6].deltaE_system = $START.evaporator.thermalElementB[6].deltaE_system (0.0 = $START.evaporator.thermalElementB[6].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[5].deltaE_system = $START.evaporator.thermalElementB[5].deltaE_system (0.0 = $START.evaporator.thermalElementB[5].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[4].deltaE_system = $START.evaporator.thermalElementB[4].deltaE_system (0.0 = $START.evaporator.thermalElementB[4].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[3].deltaE_system = $START.evaporator.thermalElementB[3].deltaE_system (0.0 = $START.evaporator.thermalElementB[3].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[2].deltaE_system = $START.evaporator.thermalElementB[2].deltaE_system (0.0 = $START.evaporator.thermalElementB[2].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[1].deltaE_system = $START.evaporator.thermalElementB[1].deltaE_system (0.0 = $START.evaporator.thermalElementB[1].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[10].deltaE_system = $START.condenser.thermalElementA[10].deltaE_system (0.0 = $START.condenser.thermalElementA[10].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[9].deltaE_system = $START.condenser.thermalElementA[9].deltaE_system (0.0 = $START.condenser.thermalElementA[9].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[8].deltaE_system = $START.condenser.thermalElementA[8].deltaE_system (0.0 = $START.condenser.thermalElementA[8].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[7].deltaE_system = $START.condenser.thermalElementA[7].deltaE_system (0.0 = $START.condenser.thermalElementA[7].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[6].deltaE_system = $START.condenser.thermalElementA[6].deltaE_system (0.0 = $START.condenser.thermalElementA[6].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[5].deltaE_system = $START.condenser.thermalElementA[5].deltaE_system (0.0 = $START.condenser.thermalElementA[5].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[4].deltaE_system = $START.condenser.thermalElementA[4].deltaE_system (0.0 = $START.condenser.thermalElementA[4].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[3].deltaE_system = $START.condenser.thermalElementA[3].deltaE_system (0.0 = $START.condenser.thermalElementA[3].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[2].deltaE_system = $START.condenser.thermalElementA[2].deltaE_system (0.0 = $START.condenser.thermalElementA[2].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[1].deltaE_system = $START.condenser.thermalElementA[1].deltaE_system (0.0 = $START.condenser.thermalElementA[1].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[10].deltaE_system = $START.condenser.thermalElementB[10].deltaE_system (0.0 = $START.condenser.thermalElementB[10].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[9].deltaE_system = $START.condenser.thermalElementB[9].deltaE_system (0.0 = $START.condenser.thermalElementB[9].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[8].deltaE_system = $START.condenser.thermalElementB[8].deltaE_system (0.0 = $START.condenser.thermalElementB[8].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[7].deltaE_system = $START.condenser.thermalElementB[7].deltaE_system (0.0 = $START.condenser.thermalElementB[7].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[6].deltaE_system = $START.condenser.thermalElementB[6].deltaE_system (0.0 = $START.condenser.thermalElementB[6].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[5].deltaE_system = $START.condenser.thermalElementB[5].deltaE_system (0.0 = $START.condenser.thermalElementB[5].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[4].deltaE_system = $START.condenser.thermalElementB[4].deltaE_system (0.0 = $START.condenser.thermalElementB[4].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[3].deltaE_system = $START.condenser.thermalElementB[3].deltaE_system (0.0 = $START.condenser.thermalElementB[3].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[2].deltaE_system = $START.condenser.thermalElementB[2].deltaE_system (0.0 = $START.condenser.thermalElementB[2].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[1].deltaE_system = $START.condenser.thermalElementB[1].deltaE_system (0.0 = $START.condenser.thermalElementB[1].deltaE_system)
Notification: Performance of analyzeInitialSystem (initialization): time 0.03555/2.875, allocations: 17.1 MB / 1.436 GB, free: 14.11 MB / 0.9669 GB
Notification: Performance of solveInitialSystemEqSystem (initialization): time 4.644e-05/2.875, allocations: 8 kB / 1.436 GB, free: 14.1 MB / 0.9669 GB
Notification: Performance of matching and sorting (n=1129) (initialization): time 0.3755/3.251, allocations: 16.02 MB / 1.451 GB, free: 462.4 MB / 0.9669 GB
Notification: Performance of prepare postOptimizeDAE: time 6.267e-05/3.251, allocations: 20.12 kB / 1.451 GB, free: 462.4 MB / 0.9669 GB
Notification: Performance of postOpt simplifyComplexFunction (initialization): time 0.0001139/3.251, allocations: 40.42 kB / 1.452 GB, free: 462.3 MB / 0.9669 GB
Notification: Performance of postOpt tearingSystem (initialization): time 0.009192/3.26, allocations: 1.945 MB / 1.453 GB, free: 462.2 MB / 0.9669 GB
Notification: Performance of postOpt solveSimpleEquations (initialization): time 0.01051/3.271, allocations: 2.259 MB / 1.456 GB, free: 462.2 MB / 0.9669 GB
Notification: Performance of postOpt calculateStrongComponentJacobians (initialization): time 0.03163/3.302, allocations: 44.07 MB / 1.499 GB, free: 430.1 MB / 0.9669 GB
Notification: Performance of postOpt simplifyAllExpressions (initialization): time 0.008751/3.311, allocations: 0.752 MB / 1.499 GB, free: 430 MB / 0.9669 GB
Notification: Performance of postOpt collapseArrayExpressions (initialization): time 0.002936/3.314, allocations: 0.6652 MB / 1.5 GB, free: 429.9 MB / 0.9669 GB
Warning: The initial conditions are over specified. The following 40 initial equations are redundant, so they are removed from the initialization system:
         evaporator.thermalElementA[10].deltaE_system = $START.evaporator.thermalElementA[10].deltaE_system
         evaporator.thermalElementA[9].deltaE_system = $START.evaporator.thermalElementA[9].deltaE_system
         evaporator.thermalElementA[8].deltaE_system = $START.evaporator.thermalElementA[8].deltaE_system
         evaporator.thermalElementA[7].deltaE_system = $START.evaporator.thermalElementA[7].deltaE_system
         evaporator.thermalElementA[6].deltaE_system = $START.evaporator.thermalElementA[6].deltaE_system
         evaporator.thermalElementA[5].deltaE_system = $START.evaporator.thermalElementA[5].deltaE_system
         evaporator.thermalElementA[4].deltaE_system = $START.evaporator.thermalElementA[4].deltaE_system
         evaporator.thermalElementA[3].deltaE_system = $START.evaporator.thermalElementA[3].deltaE_system
         evaporator.thermalElementA[2].deltaE_system = $START.evaporator.thermalElementA[2].deltaE_system
         evaporator.thermalElementA[1].deltaE_system = $START.evaporator.thermalElementA[1].deltaE_system
         evaporator.thermalElementB[10].deltaE_system = $START.evaporator.thermalElementB[10].deltaE_system
         evaporator.thermalElementB[9].deltaE_system = $START.evaporator.thermalElementB[9].deltaE_system
         evaporator.thermalElementB[8].deltaE_system = $START.evaporator.thermalElementB[8].deltaE_system
         evaporator.thermalElementB[7].deltaE_system = $START.evaporator.thermalElementB[7].deltaE_system
         evaporator.thermalElementB[6].deltaE_system = $START.evaporator.thermalElementB[6].deltaE_system
         evaporator.thermalElementB[5].deltaE_system = $START.evaporator.thermalElementB[5].deltaE_system
         evaporator.thermalElementB[4].deltaE_system = $START.evaporator.thermalElementB[4].deltaE_system
         evaporator.thermalElementB[3].deltaE_system = $START.evaporator.thermalElementB[3].deltaE_system
         evaporator.thermalElementB[2].deltaE_system = $START.evaporator.thermalElementB[2].deltaE_system
         evaporator.thermalElementB[1].deltaE_system = $START.evaporator.thermalElementB[1].deltaE_system
         condenser.thermalElementA[10].deltaE_system = $START.condenser.thermalElementA[10].deltaE_system
         condenser.thermalElementA[9].deltaE_system = $START.condenser.thermalElementA[9].deltaE_system
         condenser.thermalElementA[8].deltaE_system = $START.condenser.thermalElementA[8].deltaE_system
         condenser.thermalElementA[7].deltaE_system = $START.condenser.thermalElementA[7].deltaE_system
         condenser.thermalElementA[6].deltaE_system = $START.condenser.thermalElementA[6].deltaE_system
         condenser.thermalElementA[5].deltaE_system = $START.condenser.thermalElementA[5].deltaE_system
         condenser.thermalElementA[4].deltaE_system = $START.condenser.thermalElementA[4].deltaE_system
         condenser.thermalElementA[3].deltaE_system = $START.condenser.thermalElementA[3].deltaE_system
         condenser.thermalElementA[2].deltaE_system = $START.condenser.thermalElementA[2].deltaE_system
         condenser.thermalElementA[1].deltaE_system = $START.condenser.thermalElementA[1].deltaE_system
         condenser.thermalElementB[10].deltaE_system = $START.condenser.thermalElementB[10].deltaE_system
         condenser.thermalElementB[9].deltaE_system = $START.condenser.thermalElementB[9].deltaE_system
         condenser.thermalElementB[8].deltaE_system = $START.condenser.thermalElementB[8].deltaE_system
         condenser.thermalElementB[7].deltaE_system = $START.condenser.thermalElementB[7].deltaE_system
         condenser.thermalElementB[6].deltaE_system = $START.condenser.thermalElementB[6].deltaE_system
         condenser.thermalElementB[5].deltaE_system = $START.condenser.thermalElementB[5].deltaE_system
         condenser.thermalElementB[4].deltaE_system = $START.condenser.thermalElementB[4].deltaE_system
         condenser.thermalElementB[3].deltaE_system = $START.condenser.thermalElementB[3].deltaE_system
         condenser.thermalElementB[2].deltaE_system = $START.condenser.thermalElementB[2].deltaE_system
         condenser.thermalElementB[1].deltaE_system = $START.condenser.thermalElementB[1].deltaE_system.
Notification: Performance of preBalanceInitialSystem (initialization_lambda0): time 0.01935/3.333, allocations: 8.644 MB / 1.508 GB, free: 427 MB / 0.9669 GB
Notification: Performance of partitionIndependentBlocks (initialization_lambda0): time 0.01434/3.348, allocations: 7.258 MB / 1.516 GB, free: 423.7 MB / 0.9669 GB
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[10].deltaE_system = $START.evaporator.thermalElementA[10].deltaE_system (0.0 = $START.evaporator.thermalElementA[10].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[9].deltaE_system = $START.evaporator.thermalElementA[9].deltaE_system (0.0 = $START.evaporator.thermalElementA[9].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[8].deltaE_system = $START.evaporator.thermalElementA[8].deltaE_system (0.0 = $START.evaporator.thermalElementA[8].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[7].deltaE_system = $START.evaporator.thermalElementA[7].deltaE_system (0.0 = $START.evaporator.thermalElementA[7].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[6].deltaE_system = $START.evaporator.thermalElementA[6].deltaE_system (0.0 = $START.evaporator.thermalElementA[6].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[5].deltaE_system = $START.evaporator.thermalElementA[5].deltaE_system (0.0 = $START.evaporator.thermalElementA[5].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[4].deltaE_system = $START.evaporator.thermalElementA[4].deltaE_system (0.0 = $START.evaporator.thermalElementA[4].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[3].deltaE_system = $START.evaporator.thermalElementA[3].deltaE_system (0.0 = $START.evaporator.thermalElementA[3].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[2].deltaE_system = $START.evaporator.thermalElementA[2].deltaE_system (0.0 = $START.evaporator.thermalElementA[2].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[1].deltaE_system = $START.evaporator.thermalElementA[1].deltaE_system (0.0 = $START.evaporator.thermalElementA[1].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[10].deltaE_system = $START.evaporator.thermalElementB[10].deltaE_system (0.0 = $START.evaporator.thermalElementB[10].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[9].deltaE_system = $START.evaporator.thermalElementB[9].deltaE_system (0.0 = $START.evaporator.thermalElementB[9].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[8].deltaE_system = $START.evaporator.thermalElementB[8].deltaE_system (0.0 = $START.evaporator.thermalElementB[8].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[7].deltaE_system = $START.evaporator.thermalElementB[7].deltaE_system (0.0 = $START.evaporator.thermalElementB[7].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[6].deltaE_system = $START.evaporator.thermalElementB[6].deltaE_system (0.0 = $START.evaporator.thermalElementB[6].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[5].deltaE_system = $START.evaporator.thermalElementB[5].deltaE_system (0.0 = $START.evaporator.thermalElementB[5].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[4].deltaE_system = $START.evaporator.thermalElementB[4].deltaE_system (0.0 = $START.evaporator.thermalElementB[4].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[3].deltaE_system = $START.evaporator.thermalElementB[3].deltaE_system (0.0 = $START.evaporator.thermalElementB[3].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[2].deltaE_system = $START.evaporator.thermalElementB[2].deltaE_system (0.0 = $START.evaporator.thermalElementB[2].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[1].deltaE_system = $START.evaporator.thermalElementB[1].deltaE_system (0.0 = $START.evaporator.thermalElementB[1].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[10].deltaE_system = $START.condenser.thermalElementA[10].deltaE_system (0.0 = $START.condenser.thermalElementA[10].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[9].deltaE_system = $START.condenser.thermalElementA[9].deltaE_system (0.0 = $START.condenser.thermalElementA[9].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[8].deltaE_system = $START.condenser.thermalElementA[8].deltaE_system (0.0 = $START.condenser.thermalElementA[8].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[7].deltaE_system = $START.condenser.thermalElementA[7].deltaE_system (0.0 = $START.condenser.thermalElementA[7].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[6].deltaE_system = $START.condenser.thermalElementA[6].deltaE_system (0.0 = $START.condenser.thermalElementA[6].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[5].deltaE_system = $START.condenser.thermalElementA[5].deltaE_system (0.0 = $START.condenser.thermalElementA[5].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[4].deltaE_system = $START.condenser.thermalElementA[4].deltaE_system (0.0 = $START.condenser.thermalElementA[4].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[3].deltaE_system = $START.condenser.thermalElementA[3].deltaE_system (0.0 = $START.condenser.thermalElementA[3].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[2].deltaE_system = $START.condenser.thermalElementA[2].deltaE_system (0.0 = $START.condenser.thermalElementA[2].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[1].deltaE_system = $START.condenser.thermalElementA[1].deltaE_system (0.0 = $START.condenser.thermalElementA[1].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[10].deltaE_system = $START.condenser.thermalElementB[10].deltaE_system (0.0 = $START.condenser.thermalElementB[10].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[9].deltaE_system = $START.condenser.thermalElementB[9].deltaE_system (0.0 = $START.condenser.thermalElementB[9].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[8].deltaE_system = $START.condenser.thermalElementB[8].deltaE_system (0.0 = $START.condenser.thermalElementB[8].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[7].deltaE_system = $START.condenser.thermalElementB[7].deltaE_system (0.0 = $START.condenser.thermalElementB[7].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[6].deltaE_system = $START.condenser.thermalElementB[6].deltaE_system (0.0 = $START.condenser.thermalElementB[6].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[5].deltaE_system = $START.condenser.thermalElementB[5].deltaE_system (0.0 = $START.condenser.thermalElementB[5].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[4].deltaE_system = $START.condenser.thermalElementB[4].deltaE_system (0.0 = $START.condenser.thermalElementB[4].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[3].deltaE_system = $START.condenser.thermalElementB[3].deltaE_system (0.0 = $START.condenser.thermalElementB[3].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[2].deltaE_system = $START.condenser.thermalElementB[2].deltaE_system (0.0 = $START.condenser.thermalElementB[2].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[1].deltaE_system = $START.condenser.thermalElementB[1].deltaE_system (0.0 = $START.condenser.thermalElementB[1].deltaE_system)
Notification: Performance of analyzeInitialSystem (initialization_lambda0): time 0.02868/3.377, allocations: 17.02 MB / 1.532 GB, free: 414.3 MB / 0.9669 GB
Notification: Performance of solveInitialSystemEqSystem (initialization_lambda0): time 7.824e-05/3.377, allocations: 14.25 kB / 1.532 GB, free: 414.3 MB / 0.9669 GB
Notification: Performance of matching and sorting (n=1129) (initialization_lambda0): time 0.04038/3.417, allocations: 15.94 MB / 1.548 GB, free: 409.3 MB / 0.9669 GB
Notification: Performance of prepare postOptimizeDAE: time 4.005e-05/3.417, allocations: 22.52 kB / 1.548 GB, free: 409.3 MB / 0.9669 GB
Notification: Performance of postOpt simplifyComplexFunction (initialization): time 7.958e-05/3.417, allocations: 35.38 kB / 1.548 GB, free: 409.3 MB / 0.9669 GB
Notification: Performance of postOpt tearingSystem (initialization): time 0.008376/3.426, allocations: 1.96 MB / 1.55 GB, free: 408.7 MB / 0.9669 GB
Notification: Performance of postOpt solveSimpleEquations (initialization): time 0.01033/3.436, allocations: 2.241 MB / 1.552 GB, free: 408.5 MB / 0.9669 GB
Notification: Performance of postOpt calculateStrongComponentJacobians (initialization): time 0.02951/3.466, allocations: 44.05 MB / 1.595 GB, free: 371.2 MB / 0.9669 GB
Notification: Performance of postOpt simplifyAllExpressions (initialization): time 0.00965/3.475, allocations: 0.7501 MB / 1.596 GB, free: 371 MB / 0.9669 GB
Notification: Performance of postOpt collapseArrayExpressions (initialization): time 0.003148/3.478, allocations: 0.6635 MB / 1.596 GB, free: 371 MB / 0.9669 GB
Warning: The initial conditions are over specified. The following 40 initial equations are redundant, so they are removed from the initialization_lambda0 system:
         evaporator.thermalElementA[10].deltaE_system = $START.evaporator.thermalElementA[10].deltaE_system
         evaporator.thermalElementA[9].deltaE_system = $START.evaporator.thermalElementA[9].deltaE_system
         evaporator.thermalElementA[8].deltaE_system = $START.evaporator.thermalElementA[8].deltaE_system
         evaporator.thermalElementA[7].deltaE_system = $START.evaporator.thermalElementA[7].deltaE_system
         evaporator.thermalElementA[6].deltaE_system = $START.evaporator.thermalElementA[6].deltaE_system
         evaporator.thermalElementA[5].deltaE_system = $START.evaporator.thermalElementA[5].deltaE_system
         evaporator.thermalElementA[4].deltaE_system = $START.evaporator.thermalElementA[4].deltaE_system
         evaporator.thermalElementA[3].deltaE_system = $START.evaporator.thermalElementA[3].deltaE_system
         evaporator.thermalElementA[2].deltaE_system = $START.evaporator.thermalElementA[2].deltaE_system
         evaporator.thermalElementA[1].deltaE_system = $START.evaporator.thermalElementA[1].deltaE_system
         evaporator.thermalElementB[10].deltaE_system = $START.evaporator.thermalElementB[10].deltaE_system
         evaporator.thermalElementB[9].deltaE_system = $START.evaporator.thermalElementB[9].deltaE_system
         evaporator.thermalElementB[8].deltaE_system = $START.evaporator.thermalElementB[8].deltaE_system
         evaporator.thermalElementB[7].deltaE_system = $START.evaporator.thermalElementB[7].deltaE_system
         evaporator.thermalElementB[6].deltaE_system = $START.evaporator.thermalElementB[6].deltaE_system
         evaporator.thermalElementB[5].deltaE_system = $START.evaporator.thermalElementB[5].deltaE_system
         evaporator.thermalElementB[4].deltaE_system = $START.evaporator.thermalElementB[4].deltaE_system
         evaporator.thermalElementB[3].deltaE_system = $START.evaporator.thermalElementB[3].deltaE_system
         evaporator.thermalElementB[2].deltaE_system = $START.evaporator.thermalElementB[2].deltaE_system
         evaporator.thermalElementB[1].deltaE_system = $START.evaporator.thermalElementB[1].deltaE_system
         condenser.thermalElementA[10].deltaE_system = $START.condenser.thermalElementA[10].deltaE_system
         condenser.thermalElementA[9].deltaE_system = $START.condenser.thermalElementA[9].deltaE_system
         condenser.thermalElementA[8].deltaE_system = $START.condenser.thermalElementA[8].deltaE_system
         condenser.thermalElementA[7].deltaE_system = $START.condenser.thermalElementA[7].deltaE_system
         condenser.thermalElementA[6].deltaE_system = $START.condenser.thermalElementA[6].deltaE_system
         condenser.thermalElementA[5].deltaE_system = $START.condenser.thermalElementA[5].deltaE_system
         condenser.thermalElementA[4].deltaE_system = $START.condenser.thermalElementA[4].deltaE_system
         condenser.thermalElementA[3].deltaE_system = $START.condenser.thermalElementA[3].deltaE_system
         condenser.thermalElementA[2].deltaE_system = $START.condenser.thermalElementA[2].deltaE_system
         condenser.thermalElementA[1].deltaE_system = $START.condenser.thermalElementA[1].deltaE_system
         condenser.thermalElementB[10].deltaE_system = $START.condenser.thermalElementB[10].deltaE_system
         condenser.thermalElementB[9].deltaE_system = $START.condenser.thermalElementB[9].deltaE_system
         condenser.thermalElementB[8].deltaE_system = $START.condenser.thermalElementB[8].deltaE_system
         condenser.thermalElementB[7].deltaE_system = $START.condenser.thermalElementB[7].deltaE_system
         condenser.thermalElementB[6].deltaE_system = $START.condenser.thermalElementB[6].deltaE_system
         condenser.thermalElementB[5].deltaE_system = $START.condenser.thermalElementB[5].deltaE_system
         condenser.thermalElementB[4].deltaE_system = $START.condenser.thermalElementB[4].deltaE_system
         condenser.thermalElementB[3].deltaE_system = $START.condenser.thermalElementB[3].deltaE_system
         condenser.thermalElementB[2].deltaE_system = $START.condenser.thermalElementB[2].deltaE_system
         condenser.thermalElementB[1].deltaE_system = $START.condenser.thermalElementB[1].deltaE_system.
Notification: Model statistics after passing the back-end for initialization:
 * Number of independent subsystems: 156
 * Number of states: 0 ()
 * Number of discrete variables: 46 (receiver.medium.phase,singleSensorSelect5.inlet.state.phase,sensorVaporQuality.inlet.state.phase,singleFlowSensor.outlet.state.phase,receiver.outlet.state.phase,receiver.inlet.state.phase,evaporator.thermalElementB[10].state.phase,evaporator.thermalElementB[9].state.phase,evaporator.thermalElementB[9].outlet.state.phase,evaporator.thermalElementB[8].state.phase,evaporator.thermalElementB[8].outlet.state.phase,evaporator.thermalElementB[7].state.phase,evaporator.thermalElementB[7].outlet.state.phase,evaporator.thermalElementB[6].state.phase,evaporator.thermalElementB[6].outlet.state.phase,evaporator.thermalElementB[5].state.phase,evaporator.thermalElementB[5].outlet.state.phase,evaporator.thermalElementB[4].state.phase,evaporator.thermalElementB[4].outlet.state.phase,evaporator.thermalElementB[3].state.phase,evaporator.thermalElementB[3].outlet.state.phase,evaporator.thermalElementB[2].state.phase,evaporator.thermalElementB[2].outlet.state.phase,evaporator.thermalElementB[1].state.phase,evaporator.thermalElementB[1].outlet.state.phase,condenser.thermalElementB[10].state.phase,condenser.thermalElementB[9].state.phase,condenser.thermalElementB[9].outlet.state.phase,condenser.thermalElementB[8].state.phase,condenser.thermalElementB[8].outlet.state.phase,condenser.thermalElementB[7].state.phase,condenser.thermalElementB[7].outlet.state.phase,condenser.thermalElementB[6].state.phase,condenser.thermalElementB[6].outlet.state.phase,condenser.thermalElementB[5].state.phase,condenser.thermalElementB[5].outlet.state.phase,condenser.thermalElementB[4].state.phase,condenser.thermalElementB[4].outlet.state.phase,condenser.thermalElementB[3].state.phase,condenser.thermalElementB[3].outlet.state.phase,condenser.thermalElementB[2].state.phase,condenser.thermalElementB[2].outlet.state.phase,condenser.thermalElementB[1].state.phase,condenser.thermalElementB[1].outlet.state.phase,PI_CompressorPressure.I.local_reset,PI_CompressorTemperature.I.local_reset)
 * Number of discrete states: 0 ()
 * Number of clocked states: 0 ()
 * Top-level inputs: 0
Notification: Strong component statistics for initialization (848):
 * Single equations (assignments): 780
 * Array equations: 0
 * Algorithm blocks: 0
 * Record equations: 44
 * When equations: 0
 * If-equations: 0
 * Equation systems (not torn): 0
 * Torn equation systems: 24
 * Mixed (continuous/discrete) equation systems: 0
Notification: Torn system details for strict tearing set:
 * Linear torn systems (#iteration vars, #inner vars, density): 23 systems
   {(1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,23,100.0%), (1,12,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,12,100.0%)}
 * Non-linear torn systems (#iteration vars, #inner vars): 1 system
   {(1,1)}
Notification: Performance of prepare postOptimizeDAE: time 0.003929/3.482, allocations: 0.9472 MB / 1.597 GB, free: 370.3 MB / 0.9669 GB
Notification: Performance of postOpt lateInlineFunction (simulation): time 0.002857/3.485, allocations: 0.8184 MB / 1.598 GB, free: 370.3 MB / 0.9669 GB
Notification: Performance of postOpt wrapFunctionCalls (simulation): time 0.04863/3.534, allocations: 24.09 MB / 1.622 GB, free: 360.7 MB / 0.9669 GB
Notification: Performance of postOpt inlineArrayEqn (simulation): time 0.03136/3.565, allocations: 14.61 MB / 1.636 GB, free: 346.1 MB / 0.9669 GB
Notification: Performance of postOpt constantLinearSystem (simulation): time 5.209e-05/3.565, allocations: 24 kB / 1.636 GB, free: 346 MB / 0.9669 GB
Notification: Performance of postOpt simplifysemiLinear (simulation): time 0.0001971/3.566, allocations: 43.83 kB / 1.636 GB, free: 346 MB / 0.9669 GB
Warning: The model contains alias variables with redundant start and/or conflicting nominal values. It is recommended to resolve the conflicts, because otherwise the system could be hard to solve. To print the conflicting alias sets and the chosen candidates please use -d=aliasConflicts.
Notification: Performance of postOpt removeSimpleEquations (simulation): time 0.06082/3.626, allocations: 32.3 MB / 1.667 GB, free: 313.7 MB / 0.9669 GB
Notification: Performance of postOpt simplifyComplexFunction (simulation): time 9.957e-05/3.627, allocations: 4 kB / 1.667 GB, free: 313.7 MB / 0.9669 GB
Notification: Performance of postOpt solveSimpleEquations (simulation): time 0.00907/3.636, allocations: 2.079 MB / 1.669 GB, free: 311.6 MB / 0.9669 GB
Notification: Performance of postOpt tearingSystem (simulation): time 0.004684/3.64, allocations: 1.879 MB / 1.671 GB, free: 309.7 MB / 0.9669 GB
Notification: Performance of postOpt inputDerivativesUsed (simulation): time 0.002232/3.643, allocations: 359.7 kB / 1.672 GB, free: 309.3 MB / 0.9669 GB
Notification: Performance of postOpt calculateStrongComponentJacobians (simulation): time 0.02569/3.668, allocations: 44.31 MB / 1.715 GB, free: 261.9 MB / 0.9669 GB
Notification: Performance of postOpt calculateStateSetsJacobians (simulation): time 2.906e-06/3.668, allocations: 4.031 kB / 1.715 GB, free: 261.9 MB / 0.9669 GB
Notification: Performance of postOpt symbolicJacobian (simulation): time 0.04457/3.713, allocations: 24.14 MB / 1.739 GB, free: 237.7 MB / 0.9669 GB
Notification: Performance of postOpt removeConstants (simulation): time 0.005999/3.719, allocations: 2.128 MB / 1.741 GB, free: 235.5 MB / 0.9669 GB
Notification: Performance of postOpt simplifyTimeIndepFuncCalls (simulation): time 0.002822/3.722, allocations: 219.9 kB / 1.741 GB, free: 235.3 MB / 0.9669 GB
Notification: Performance of postOpt simplifyAllExpressions (simulation): time 0.007403/3.729, allocations: 0.8504 MB / 1.742 GB, free: 234.5 MB / 0.9669 GB
Notification: Performance of postOpt findZeroCrossings (simulation): time 0.001691/3.731, allocations: 0.6819 MB / 1.742 GB, free: 233.8 MB / 0.9669 GB
Notification: Performance of postOpt collapseArrayExpressions (simulation): time 0.001004/3.732, allocations: 475.7 kB / 1.743 GB, free: 233.3 MB / 0.9669 GB
Notification: Performance of sorting global known variables: time 0.00611/3.738, allocations: 4.248 MB / 1.747 GB, free: 229.1 MB / 0.9669 GB
Notification: Performance of sort global known variables: time 2.71e-07/3.738, allocations: 0 / 1.747 GB, free: 229.1 MB / 0.9669 GB
Notification: Performance of remove unused functions: time 0.03991/3.778, allocations: 7.431 MB / 1.754 GB, free: 222.1 MB / 0.9669 GB
Notification: Model statistics after passing the back-end for simulation:
 * Number of independent subsystems: 6
 * Number of states: 53 (condenser.thermalElementB[1].h,condenser.thermalElementB[2].h,condenser.thermalElementB[3].h,condenser.thermalElementB[4].h,condenser.thermalElementB[5].h,condenser.thermalElementB[6].h,condenser.thermalElementB[7].h,condenser.thermalElementB[8].h,condenser.thermalElementB[9].h,condenser.thermalElementB[10].h,condenser.thermalElementA[1].inlet.m_flow,condenser.thermalElementA[1].h,condenser.thermalElementA[2].h,condenser.thermalElementA[3].h,condenser.thermalElementA[4].h,condenser.thermalElementA[5].h,condenser.thermalElementA[6].h,condenser.thermalElementA[7].h,condenser.thermalElementA[8].h,condenser.thermalElementA[9].h,condenser.thermalElementA[10].h,evaporator.thermalElementB[1].h,evaporator.thermalElementB[2].h,evaporator.thermalElementB[3].h,evaporator.thermalElementB[4].h,evaporator.thermalElementB[5].h,evaporator.thermalElementB[6].h,evaporator.thermalElementB[7].h,evaporator.thermalElementB[8].h,evaporator.thermalElementB[9].h,evaporator.thermalElementB[10].h,evaporator.thermalElementA[1].inlet.m_flow,evaporator.thermalElementA[1].h,evaporator.thermalElementA[2].h,evaporator.thermalElementA[3].h,evaporator.thermalElementA[4].h,evaporator.thermalElementA[5].h,evaporator.thermalElementA[6].h,evaporator.thermalElementA[7].h,evaporator.thermalElementA[8].h,evaporator.thermalElementA[9].h,evaporator.thermalElementA[10].h,receiver.M,receiver.U_med,PI.x,PI1.x,multiSensor_Tp1.p,multiSensor_Tp1.T,compressor.m_flow,PI_Valve.x,firstOrderValve.y,PI_CompressorTemperature.I.y,PI_CompressorPressure.I.y)
 * Number of discrete variables: 68 (condenser.thermalElementB[1].state.phase,condenser.thermalElementB[1].outlet.state.phase,condenser.thermalElementB[4].outlet.state.phase,condenser.thermalElementB[4].state.phase,condenser.thermalElementB[6].outlet.state.phase,condenser.thermalElementB[6].state.phase,condenser.thermalElementB[9].outlet.state.phase,condenser.thermalElementB[9].state.phase,receiver.inlet.state.phase,condenser.thermalElementB[10].state.phase,condenser.thermalElementB[8].outlet.state.phase,condenser.thermalElementB[8].state.phase,condenser.thermalElementB[7].outlet.state.phase,condenser.thermalElementB[7].state.phase,condenser.thermalElementB[5].outlet.state.phase,condenser.thermalElementB[5].state.phase,condenser.thermalElementB[3].outlet.state.phase,condenser.thermalElementB[3].state.phase,condenser.thermalElementB[2].outlet.state.phase,condenser.thermalElementB[2].state.phase,evaporator.thermalElementB[1].state.phase,evaporator.thermalElementB[1].outlet.state.phase,evaporator.thermalElementB[4].outlet.state.phase,evaporator.thermalElementB[4].state.phase,evaporator.thermalElementB[8].outlet.state.phase,evaporator.thermalElementB[8].state.phase,singleFlowSensor.outlet.state.phase,singleSensorSelect5.inlet.state.phase,evaporator.thermalElementB[10].state.phase,evaporator.thermalElementB[9].outlet.state.phase,evaporator.thermalElementB[9].state.phase,evaporator.thermalElementB[7].outlet.state.phase,evaporator.thermalElementB[7].state.phase,evaporator.thermalElementB[6].outlet.state.phase,evaporator.thermalElementB[6].state.phase,evaporator.thermalElementB[5].outlet.state.phase,evaporator.thermalElementB[5].state.phase,evaporator.thermalElementB[3].outlet.state.phase,evaporator.thermalElementB[3].state.phase,evaporator.thermalElementB[2].outlet.state.phase,evaporator.thermalElementB[2].state.phase,sensorVaporQuality.inlet.state.phase,receiver.outlet.state.phase,$cse1.phase,$cse2.phase,$cse3.phase,$cse4.phase,$cse5.phase,$cse6.phase,$cse7.phase,$cse8.phase,$cse9.phase,$cse10.phase,$cse11.phase,$cse12.phase,$cse13.phase,$cse14.phase,$cse15.phase,$cse16.phase,$cse17.phase,$cse18.phase,$cse19.phase,$cse20.phase,$cse21.phase,$cse22,$cse25.phase,$cse27.phase,$cse30.phase)
 * Number of discrete states: 0 ()
 * Number of clocked states: 0 ()
 * Top-level inputs: 0
Notification: Strong component statistics for simulation (837):
 * Single equations (assignments): 767
 * Array equations: 0
 * Algorithm blocks: 0
 * Record equations: 45
 * When equations: 0
 * If-equations: 0
 * Equation systems (not torn): 0
 * Torn equation systems: 25
 * Mixed (continuous/discrete) equation systems: 0
Notification: Torn system details for strict tearing set:
 * Linear torn systems (#iteration vars, #inner vars, density): 23 systems
   {(1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,23,100.0%), (1,12,100.0%), (1,12,100.0%)}
 * Non-linear torn systems (#iteration vars, #inner vars): 2 systems
   {(1,1), (1,3)}
Notification: Performance of Backend phase and start with SimCode phase: time 0.2103/3.988, allocations: 51.43 MB / 1.804 GB, free: 171.3 MB / 0.9669 GB
Notification: Performance of simCode: created initialization part: time 0.16/4.148, allocations: 69.71 MB / 1.872 GB, free: 99.82 MB / 0.9669 GB
Notification: Performance of simCode: created event and clocks part: time 1.393e-05/4.148, allocations: 5.75 kB / 1.872 GB, free: 99.82 MB / 0.9669 GB
Notification: Performance of simCode: created simulation system equations: time 0.01737/4.166, allocations: 10.45 MB / 1.883 GB, free: 89.07 MB / 0.9669 GB
Notification: Performance of simCode: created of all other equations (e.g. parameter, nominal, assert, etc): time 0.02136/4.187, allocations: 3.973 MB / 1.887 GB, free: 85.26 MB / 0.9669 GB
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect5.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality3.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality2.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality1.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getFlowUnit(singleFlowSensor.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect4.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect3.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect2.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect1.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect5.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorCondenserSubcooling.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorEvaporatorSuperheating.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality3.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality2.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality1.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getFlowUnit(singleFlowSensor.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect4.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect3.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect2.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect1.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorCondenserSubcooling.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorEvaporatorSuperheating.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect5.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality3.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality2.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality1.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getFlowUnit(singleFlowSensor.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect4.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect3.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect2.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect1.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10354:11-10354:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect.quantity)
Notification: Performance of simCode: created linear, non-linear and system jacobian parts: time 0.5375/4.725, allocations: 124.2 MB / 2.008 GB, free: 409.4 MB / 0.9669 GB
Notification: Performance of simCode: some other stuff during SimCode phase: time 0.009829/4.735, allocations: 6.748 MB / 2.014 GB, free: 408.5 MB / 0.9669 GB
Notification: Performance of simCode: alias equations: time 0.03228/4.767, allocations: 11.28 MB / 2.025 GB, free: 408.1 MB / 0.9669 GB
Notification: Performance of simCode: all other stuff during SimCode phase: time 0.01271/4.78, allocations: 5.551 MB / 2.031 GB, free: 407.2 MB / 0.9669 GB
Notification: Performance of SimCode: time 9.82e-07/4.78, allocations: 0 / 2.031 GB, free: 407.2 MB / 0.9669 GB
Notification: Performance of buildModelFMU: Generate the FMI files: time 0.9182/5.698, allocations: 389.2 MB / 2.411 GB, free: 419.4 MB / 0.9669 GB
Notification: Performance of buildModelFMU: Generate platform static: time 25.17/30.87, allocations: 5.203 kB / 2.411 GB, free: 419.4 MB / 0.9669 GB
(rm -f ThermofluidStream_dev_ThermofluidStream.Examples.VaporCycle.pipe ; mkfifo ThermofluidStream_dev_ThermofluidStream.Examples.VaporCycle.pipe ; head -c 1048576 < ThermofluidStream_dev_ThermofluidStream.Examples.VaporCycle.pipe >> ../files/ThermofluidStream_dev_ThermofluidStream.Examples.VaporCycle.sim & /home/hudson/saved_omc/OMSimulator/install/bin/OMSimulator -r=ThermofluidStream_dev_ThermofluidStream.Examples.VaporCycle_res.mat --tempDir=temp_ThermofluidStream_dev_ThermofluidStream_Examples_VaporCycle_fmu --startTime=0 --stopTime=1500 --timeout=1200 --tolerance=1e-06 ThermofluidStream_dev_ThermofluidStream_Examples_VaporCycle.fmu > ThermofluidStream_dev_ThermofluidStream.Examples.VaporCycle.pipe 2>&1)