/home/hudson/saved_omc/OMSimulator/install/bin/OMSimulator -r=Buildings_10_Buildings.Experimental.DHC.Loads.BaseClasses.Examples.CouplingRCZ6_res.mat --tempDir=temp_Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6_fmu --startTime=0 --stopTime=604800 --timeout=50 --tolerance=1e-06 Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6.fmu
LOG_STDOUT        | info    | ... loading "Internals" from "/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/Buildings_10_Buildings.Experimental.DHC.Loads.BaseClasses.Examples.CouplingRCZ6/temp_Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6_fmu/model-ruwrrte9/temp/0001_Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6/resources/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Resources/Data/Experimental/DHC/Loads/Examples/BaseClasses/GeojsonExportRC/OfficeBuilding/InternalGains_Office.txt"
LOG_STDOUT        | info    | ... loading "Internals" from "/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/Buildings_10_Buildings.Experimental.DHC.Loads.BaseClasses.Examples.CouplingRCZ6/temp_Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6_fmu/model-ruwrrte9/temp/0001_Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6/resources/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Resources/Data/Experimental/DHC/Loads/Examples/BaseClasses/GeojsonExportRC/OfficeBuilding/InternalGains_Floor.txt"
LOG_STDOUT        | info    | ... loading "Internals" from "/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/Buildings_10_Buildings.Experimental.DHC.Loads.BaseClasses.Examples.CouplingRCZ6/temp_Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6_fmu/model-ruwrrte9/temp/0001_Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6/resources/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Resources/Data/Experimental/DHC/Loads/Examples/BaseClasses/GeojsonExportRC/OfficeBuilding/InternalGains_Storage.txt"
LOG_STDOUT        | info    | ... loading "Internals" from "/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/Buildings_10_Buildings.Experimental.DHC.Loads.BaseClasses.Examples.CouplingRCZ6/temp_Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6_fmu/model-ruwrrte9/temp/0001_Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6/resources/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Resources/Data/Experimental/DHC/Loads/Examples/BaseClasses/GeojsonExportRC/OfficeBuilding/InternalGains_Meeting.txt"
LOG_STDOUT        | info    | ... loading "Internals" from "/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/Buildings_10_Buildings.Experimental.DHC.Loads.BaseClasses.Examples.CouplingRCZ6/temp_Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6_fmu/model-ruwrrte9/temp/0001_Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6/resources/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Resources/Data/Experimental/DHC/Loads/Examples/BaseClasses/GeojsonExportRC/OfficeBuilding/InternalGains_Restroom.txt"
LOG_STDOUT        | info    | ... loading "Internals" from "/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/Buildings_10_Buildings.Experimental.DHC.Loads.BaseClasses.Examples.CouplingRCZ6/temp_Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6_fmu/model-ruwrrte9/temp/0001_Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6/resources/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Resources/Data/Experimental/DHC/Loads/Examples/BaseClasses/GeojsonExportRC/OfficeBuilding/InternalGains_ICT.txt"
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:417:3-427:39:writable]
|                 | |       | The following assertion has been violated during initialization at time 0.000000
|                 | |       | ((false)) --> "*** Warning in CouplingRCZ6.bui.terUni.fan: Mover has per.etaHydMet=.Power_VolumeFlowRate or per.etaHydMet=.EulerNumber.
|                 | |       | This requires per.pressure to be provided.
|                 | |       | Because it is not, the model overrides this setting by using per.etaHydMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve."
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:429:3-439:39:writable]
|                 | |       | The following assertion has been violated during initialization at time 0.000000
|                 | |       | ((false)) --> "*** Warning in CouplingRCZ6.bui.terUni.fan: Mover has per.etaMotMet=.Efficiency_MotorPartLoadRatio or per.etaMotMet=.GenericCurve.
|                 | |       | This requires per.WMot_nominal or per.pressure to be provided. Because neither is provided,
|                 | |       | the model overrides this setting and by using per.etaMotMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve."
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:417:3-427:39:writable]
|                 | |       | The following assertion has been violated during initialization at time 0.000000
|                 | |       | ((false)) --> "*** Warning in CouplingRCZ6.bui.terUni.fan: Mover has per.etaHydMet=.Power_VolumeFlowRate or per.etaHydMet=.EulerNumber.
|                 | |       | This requires per.pressure to be provided.
|                 | |       | Because it is not, the model overrides this setting by using per.etaHydMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve."
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:429:3-439:39:writable]
|                 | |       | The following assertion has been violated during initialization at time 0.000000
|                 | |       | ((false)) --> "*** Warning in CouplingRCZ6.bui.terUni.fan: Mover has per.etaMotMet=.Efficiency_MotorPartLoadRatio or per.etaMotMet=.GenericCurve.
|                 | |       | This requires per.WMot_nominal or per.pressure to be provided. Because neither is provided,
|                 | |       | the model overrides this setting and by using per.etaMotMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve."
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:417:3-427:39:writable]
|                 | |       | The following assertion has been violated during initialization at time 0.000000
|                 | |       | ((false)) --> "*** Warning in CouplingRCZ6.bui.terUni.fan: Mover has per.etaHydMet=.Power_VolumeFlowRate or per.etaHydMet=.EulerNumber.
|                 | |       | This requires per.pressure to be provided.
|                 | |       | Because it is not, the model overrides this setting by using per.etaHydMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve."
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:429:3-439:39:writable]
|                 | |       | The following assertion has been violated during initialization at time 0.000000
|                 | |       | ((false)) --> "*** Warning in CouplingRCZ6.bui.terUni.fan: Mover has per.etaMotMet=.Efficiency_MotorPartLoadRatio or per.etaMotMet=.GenericCurve.
|                 | |       | This requires per.WMot_nominal or per.pressure to be provided. Because neither is provided,
|                 | |       | the model overrides this setting and by using per.etaMotMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve."
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:417:3-427:39:writable]
|                 | |       | The following assertion has been violated during initialization at time 0.000000
|                 | |       | ((false)) --> "*** Warning in CouplingRCZ6.bui.terUni.fan: Mover has per.etaHydMet=.Power_VolumeFlowRate or per.etaHydMet=.EulerNumber.
|                 | |       | This requires per.pressure to be provided.
|                 | |       | Because it is not, the model overrides this setting by using per.etaHydMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve."
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:429:3-439:39:writable]
|                 | |       | The following assertion has been violated during initialization at time 0.000000
|                 | |       | ((false)) --> "*** Warning in CouplingRCZ6.bui.terUni.fan: Mover has per.etaMotMet=.Efficiency_MotorPartLoadRatio or per.etaMotMet=.GenericCurve.
|                 | |       | This requires per.WMot_nominal or per.pressure to be provided. Because neither is provided,
|                 | |       | the model overrides this setting and by using per.etaMotMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve."
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:417:3-427:39:writable]
|                 | |       | The following assertion has been violated during initialization at time 0.000000
|                 | |       | ((false)) --> "*** Warning in CouplingRCZ6.bui.terUni.fan: Mover has per.etaHydMet=.Power_VolumeFlowRate or per.etaHydMet=.EulerNumber.
|                 | |       | This requires per.pressure to be provided.
|                 | |       | Because it is not, the model overrides this setting by using per.etaHydMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve."
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:429:3-439:39:writable]
|                 | |       | The following assertion has been violated during initialization at time 0.000000
|                 | |       | ((false)) --> "*** Warning in CouplingRCZ6.bui.terUni.fan: Mover has per.etaMotMet=.Efficiency_MotorPartLoadRatio or per.etaMotMet=.GenericCurve.
|                 | |       | This requires per.WMot_nominal or per.pressure to be provided. Because neither is provided,
|                 | |       | the model overrides this setting and by using per.etaMotMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve."
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:417:3-427:39:writable]
|                 | |       | The following assertion has been violated during initialization at time 0.000000
|                 | |       | ((false)) --> "*** Warning in CouplingRCZ6.bui.terUni.fan: Mover has per.etaHydMet=.Power_VolumeFlowRate or per.etaHydMet=.EulerNumber.
|                 | |       | This requires per.pressure to be provided.
|                 | |       | Because it is not, the model overrides this setting by using per.etaHydMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve."
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.1-maint.10.0.x/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:429:3-439:39:writable]
|                 | |       | The following assertion has been violated during initialization at time 0.000000
|                 | |       | ((false)) --> "*** Warning in CouplingRCZ6.bui.terUni.fan: Mover has per.etaMotMet=.Efficiency_MotorPartLoadRatio or per.etaMotMet=.GenericCurve.
|                 | |       | This requires per.WMot_nominal or per.pressure to be provided. Because neither is provided,
|                 | |       | the model overrides this setting and by using per.etaMotMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve."
info:    maximum step size for 'model.root': 0.001000
info:    Result file: Buildings_10_Buildings.Experimental.DHC.Loads.BaseClasses.Examples.CouplingRCZ6_res.mat (bufferSize=1)
info:    Parameter model.root.Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6.bui.floor.internalGains.tableName will not be stored in the result file, because the signal type is not supported
info:    Parameter model.root.Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6.bui.iCT.internalGains.tableName will not be stored in the result file, because the signal type is not supported
info:    Parameter model.root.Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6.bui.meeting.internalGains.tableName will not be stored in the result file, because the signal type is not supported
info:    Parameter model.root.Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6.bui.office.internalGains.tableName will not be stored in the result file, because the signal type is not supported
info:    Parameter model.root.Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6.bui.restroom.internalGains.tableName will not be stored in the result file, because the signal type is not supported
info:    Parameter model.root.Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6.bui.storage.internalGains.tableName will not be stored in the result file, because the signal type is not supported
error:   [operator()] Timeout occurred during simulation
info:    0 warnings
info:    1 errors
error:   [fmi2logger] /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/Buildings_10_Buildings.Experimental.DHC.Loads.BaseClasses.Examples.CouplingRCZ6/temp_Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6_fmu/model-ruwrrte9/temp/0001_Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6 (logStatusError): fmi2SetTime: Illegal model exchange call sequence. fmi2SetTime is not allowed in model_state_terminated state.
error:   [doStep] fmi2_setTime failed for FMU "model.root.Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6"
error:   [fmi2logger] /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/Buildings_10_Buildings.Experimental.DHC.Loads.BaseClasses.Examples.CouplingRCZ6/temp_Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6_fmu/model-ruwrrte9/temp/0001_Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6 (logStatusError): fmi2SetContinuousStates: Illegal model exchange call sequence. fmi2SetContinuousStates is not allowed in model_state_error state.
error:   [setContinuousStates] fmi2_setContinuousStates failed for FMU "model.root.Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6"
error:   [fmi2logger] /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/Buildings_10_Buildings.Experimental.DHC.Loads.BaseClasses.Examples.CouplingRCZ6/temp_Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6_fmu/model-ruwrrte9/temp/0001_Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6 (logStatusError): fmi2SetContinuousStates: Illegal model exchange call sequence. fmi2SetContinuousStates is not allowed in model_state_error state.
error:   [setContinuousStates] fmi2_setContinuousStates failed for FMU "model.root.Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6"
error:   [fmi2logger] /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/Buildings_10_Buildings.Experimental.DHC.Loads.BaseClasses.Examples.CouplingRCZ6/temp_Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6_fmu/model-ruwrrte9/temp/0001_Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6 (logStatusError): fmi2SetContinuousStates: Illegal model exchange call sequence. fmi2SetContinuousStates is not allowed in model_state_error state.
error:   [setContinuousStates] fmi2_setContinuousStates failed for FMU "model.root.Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6"
error:   [fmi2logger] /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/Buildings_10_Buildings.Experimental.DHC.Loads.BaseClasses.Examples.CouplingRCZ6/temp_Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6_fmu/model-ruwrrte9/temp/0001_Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6 (logStatusError): fmi2SetContinuousStates: Illegal model exchange call sequence. fmi2SetContinuousStates is not allowed in model_state_error state.
error:   [setContinuousStates] fmi2_setContinuousStates failed for FMU "model.root.Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6"
error:   [fmi2logger] /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/Buildings_10_Buildings.Experimental.DHC.Loads.BaseClasses.Examples.CouplingRCZ6/temp_Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6_fmu/model-ruwrrte9/temp/0001_Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6 (logStatusError): fmi2SetContinuousStates: Illegal model exchange call sequence. fmi2SetContinuousStates is not allowed in model_state_error state.
error:   [setContinuousStates] fmi2_setContinuousStates failed for FMU "model.root.Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6"
error:   [fmi2logger] /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/Buildings_10_Buildings.Experimental.DHC.Loads.BaseClasses.Examples.CouplingRCZ6/temp_Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6_fmu/model-ruwrrte9/temp/0001_Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6 (logStatusError): fmi2SetContinuousStates: Illegal model exchange call sequence. fmi2SetContinuousStates is not allowed in model_state_error state.
error:   [setContinuousStates] fmi2_setContinuousStates failed for FMU "model.root.Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6"
error:   [fmi2logger] /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/Buildings_10_Buildings.Experimental.DHC.Loads.BaseClasses.Examples.CouplingRCZ6/temp_Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6_fmu/model-ruwrrte9/temp/0001_Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6 (logStatusError): fmi2SetContinuousStates: Illegal model exchange call sequence. fmi2SetContinuousStates is not allowed in model_state_error state.
error:   [setContinuousStates] fmi2_setContinuousStates failed for FMU "model.root.Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6"
error:   [fmi2logger] /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/Buildings_10_Buildings.Experimental.DHC.Loads.BaseClasses.Examples.CouplingRCZ6/temp_Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6_fmu/model-ruwrrte9/temp/0001_Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6 (logStatusError): fmi2SetContinuousStates: Illegal model exchange call sequence. fmi2SetContinuousStates is not allowed in model_state_error state.
error:   [setContinuousStates] fmi2_setContinuousStates failed for FMU "model.root.Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6"
error:   [fmi2logger] /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/Buildings_10_Buildings.Experimental.DHC.Loads.BaseClasses.Examples.CouplingRCZ6/temp_Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6_fmu/model-ruwrrte9/temp/0001_Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6 (logStatusError): fmi2SetContinuousStates: Illegal model exchange call sequence. fmi2SetContinuousStates is not allowed in model_state_error state.
error:   [setContinuousStates] fmi2_setContinuousStates failed for FMU "model.root.Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6"
error:   [fmi2logger] /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/Buildings_10_Buildings.Experimental.DHC.Loads.BaseClasses.Examples.CouplingRCZ6/temp_Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6_fmu/model-ruwrrte9/temp/0001_Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6 (logStatusError): fmi2SetContinuousStates: Illegal model exchange call sequence. fmi2SetContinuousStates is not allowed in model_state_error state.
error:   [setContinuousStates] fmi2_setContinuousStates failed for FMU "model.root.Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6"
error:   [fmi2logger] /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/Buildings_10_Buildings.Experimental.DHC.Loads.BaseClasses.Examples.CouplingRCZ6/temp_Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6_fmu/model-ruwrrte9/temp/0001_Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6 (logStatusError): fmi2SetContinuousStates: Illegal model exchange call sequence. fmi2SetContinuousStates is not allowed in model_state_error state.
error:   [setContinuousStates] fmi2_setContinuousStates failed for FMU "model.root.Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6"
error:   [fmi2logger] /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/Buildings_10_Buildings.Experimental.DHC.Loads.BaseClasses.Examples.CouplingRCZ6/temp_Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6_fmu/model-ruwrrte9/temp/0001_Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6 (logStatusError): fmi2SetContinuousStates: Illegal model exchange call sequence. fmi2SetContinuousStates is not allowed in model_state_error state.
error:   [setContinuousStates] fmi2_setContinuousStates failed for FMU "model.root.Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6"
error:   [fmi2logger] /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/Buildings_10_Buildings.Experimental.DHC.Loads.BaseClasses.Examples.CouplingRCZ6/temp_Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6_fmu/model-ruwrrte9/temp/0001_Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6 (logStatusError): fmi2SetContinuousStates: Illegal model exchange call sequence. fmi2SetContinuousStates is not allowed in model_state_error state.
error:   [setContinuousStates] fmi2_setContinuousStates failed for FMU "model.root.Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6"
error:   [fmi2logger] /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/Buildings_10_Buildings.Experimental.DHC.Loads.BaseClasses.Examples.CouplingRCZ6/temp_Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6_fmu/model-ruwrrte9/temp/0001_Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6 (logStatusError): fmi2SetContinuousStates: Illegal model exchange call sequence. fmi2SetContinuousStates is not allowed in model_state_error state.
error:   [setContinuousStates] fmi2_setContinuousStates failed for FMU "model.root.Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6"
error:   [fmi2logger] /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/Buildings_10_Buildings.Experimental.DHC.Loads.BaseClasses.Examples.CouplingRCZ6/temp_Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6_fmu/model-ruwrrte9/temp/0001_Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6 (logStatusError): fmi2SetContinuousStates: Illegal model exchange call sequence. fmi2SetContinuousStates is not allowed in model_state_error state.
error:   [setContinuousStates] fmi2_setContinuousStates failed for FMU "model.root.Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6"
error:   [fmi2logger] /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/Buildings_10_Buildings.Experimental.DHC.Loads.BaseClasses.Examples.CouplingRCZ6/temp_Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6_fmu/model-ruwrrte9/temp/0001_Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6 (logStatusError): fmi2SetContinuousStates: Illegal model exchange call sequence. fmi2SetContinuousStates is not allowed in model_state_error state.
error:   [setContinuousStates] fmi2_setContinuousStates failed for FMU "model.root.Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6"

[CVODE ERROR]  CVode
  At t = 28.561 repeated recoverable right-hand side function errors.

error:   [doStep] SUNDIALS_ERROR: CVode() failed with flag = -10
error:   [fmi2logger] /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/Buildings_10_Buildings.Experimental.DHC.Loads.BaseClasses.Examples.CouplingRCZ6/temp_Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6_fmu/model-ruwrrte9/temp/0001_Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6 (logStatusError): fmi2SetContinuousStates: Illegal model exchange call sequence. fmi2SetContinuousStates is not allowed in model_state_error state.
error:   [setContinuousStates] fmi2_setContinuousStates failed for FMU "model.root.Buildings_10_Buildings_Experimental_DHC_Loads_BaseClasses_Examples_CouplingRCZ6"