Running: ./testmodel.py --libraries=/home/hudson/saved_omc/libraries/.openmodelica/libraries --ompython_omhome=/usr ThermofluidStream_ThermofluidStream.Examples.VaporCycle.conf.json
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.0.0+maint.om/package.mo", uses=false)
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.0.0+maint.om/package.mo", uses=false)
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.0.0+maint.om/package.mo", uses=false)
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermofluidStream 1.1.0-main/package.mo", uses=false)
Using package ThermofluidStream with version 1.1.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermofluidStream 1.1.0-main/package.mo)
Using package Modelica with version 4.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.0.0+maint.om/package.mo)
Using package Complex with version 4.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.0.0+maint.om/package.mo)
Using package ModelicaServices with version 4.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.0.0+maint.om/package.mo)
Running command: "" <> buildModelFMU(ThermofluidStream.Examples.VaporCycle,fileNamePrefix="ThermofluidStream_ThermofluidStream_Examples_VaporCycle",fmuType="me",version="2.0",platforms={"static"})
"" <> buildModelFMU(ThermofluidStream.Examples.VaporCycle,fileNamePrefix="ThermofluidStream_ThermofluidStream_Examples_VaporCycle",fmuType="me",version="2.0",platforms={"static"})
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.0.0+maint.om/package.mo): time 0.001011/0.001011, allocations: 103.4 kB / 15.33 MB, free: 0.5078 MB / 14.72 MB
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.0.0+maint.om/package.mo): time 0.0009928/0.0009928, allocations: 195.9 kB / 16.25 MB, free: 6.629 MB / 14.72 MB
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.0.0+maint.om/package.mo): time 1.367/1.367, allocations: 222.9 MB / 239.9 MB, free: 4.539 MB / 190.1 MB
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermofluidStream 1.1.0-main/package.mo): time 0.7764/0.7764, allocations: 91.21 MB / 381.3 MB, free: 9.512 MB / 318.1 MB
Warning: Ignoring unknown experiment annotation option: __Dymola_Algorithm = "Dassl"
Notification: Performance of FrontEnd - loaded program: time 0.002828/0.002828, allocations: 81.75 kB / 459.9 MB, free: 23.26 MB / 350.1 MB
Notification: Performance of FrontEnd - Absyn->SCode: time 0.151/0.1539, allocations: 67.68 MB / 0.5152 GB, free: 10.43 MB / 398.1 MB
Notification: Performance of NFInst.instantiate(ThermofluidStream.Examples.VaporCycle): time 0.6174/0.7713, allocations: 308.9 MB / 0.8169 GB, free: 9.887 MB / 0.6231 GB
Notification: Performance of NFInst.instExpressions: time 0.548/1.319, allocations: 194.2 MB / 1.007 GB, free: 3.219 MB / 0.6544 GB
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermofluidStream 1.1.0-main/FlowControl/BasicControlValve.mo:19:3-20:118:writable] Warning: Parameter Cvs_US has annotation(Evaluate=true) and no binding.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermofluidStream 1.1.0-main/FlowControl/BasicControlValve.mo:21:3-22:118:writable] Warning: Parameter Cvs_UK has annotation(Evaluate=true) and no binding.
Notification: Performance of NFInst.updateImplicitVariability: time 0.006036/1.325, allocations: 157.8 kB / 1.007 GB, free: 3.129 MB / 0.6544 GB
Notification: Performance of NFTyping.typeComponents: time 0.007399/1.333, allocations: 2.179 MB / 1.009 GB, free: 1.379 MB / 0.6544 GB
Notification: Performance of NFTyping.typeBindings: time 0.0239/1.357, allocations: 5.637 MB / 1.014 GB, free: 12.61 MB / 0.67 GB
Notification: Performance of NFTyping.typeClassSections: time 0.07339/1.43, allocations: 17.76 MB / 1.032 GB, free: 10.8 MB / 0.6856 GB
Notification: Performance of NFFlatten.flatten: time 0.01845/1.449, allocations: 16.93 MB / 1.048 GB, free: 9.801 MB / 0.7012 GB
Notification: Performance of NFFlatten.resolveConnections: time 0.006616/1.455, allocations: 4.249 MB / 1.052 GB, free: 5.477 MB / 0.7012 GB
Notification: Performance of NFEvalConstants.evaluate: time 0.01124/1.467, allocations: 7.08 MB / 1.059 GB, free: 14.37 MB / 0.7169 GB
Notification: Performance of NFSimplifyModel.simplify: time 0.01003/1.477, allocations: 6.726 MB / 1.066 GB, free: 7.617 MB / 0.7169 GB
Notification: Performance of NFPackage.collectConstants: time 0.003905/1.481, allocations: 1.129 MB / 1.067 GB, free: 6.488 MB / 0.7169 GB
Notification: Performance of NFFlatten.collectFunctions: time 0.9449/2.425, allocations: 143.8 MB / 1.207 GB, free: 35.1 MB / 0.7638 GB
Notification: Performance of NFScalarize.scalarize: time 0.004439/2.43, allocations: 2.638 MB / 1.21 GB, free: 34.28 MB / 0.7638 GB
Notification: Performance of NFVerifyModel.verify: time 0.01137/2.441, allocations: 6.29 MB / 1.216 GB, free: 31.81 MB / 0.7638 GB
Notification: Performance of NFConvertDAE.convert: time 0.224/2.665, allocations: 110.6 MB / 1.324 GB, free: 8.48 MB / 0.8419 GB
Notification: Performance of FrontEnd - DAE generated: time 7.484e-06/2.665, allocations: 0 / 1.324 GB, free: 8.48 MB / 0.8419 GB
Notification: Performance of FrontEnd: time 1.713e-06/2.665, allocations: 0 / 1.324 GB, free: 8.48 MB / 0.8419 GB
Notification: Performance of Transformations before backend: time 0.0005597/2.666, allocations: 0 / 1.324 GB, free: 8.48 MB / 0.8419 GB
Notification: Model statistics after passing the front-end and creating the data structures used by the back-end:
 * Number of equations: 2218
 * Number of variables: 2218
Notification: Performance of Generate backend data structure: time 0.06914/2.735, allocations: 16.5 MB / 1.34 GB, free: 9.949 MB / 0.8575 GB
Notification: Performance of prepare preOptimizeDAE: time 4.634e-05/2.735, allocations: 8.031 kB / 1.34 GB, free: 9.941 MB / 0.8575 GB
Notification: Performance of preOpt introduceOutputAliases (simulation): time 0.00423/2.739, allocations: 1.134 MB / 1.341 GB, free: 9.32 MB / 0.8575 GB
Notification: Performance of preOpt normalInlineFunction (simulation): time 0.01405/2.753, allocations: 2.213 MB / 1.344 GB, free: 7.422 MB / 0.8575 GB
Notification: Performance of preOpt evaluateParameters (simulation): time 0.01501/2.768, allocations: 6.213 MB / 1.35 GB, free: 2.785 MB / 0.8575 GB
Notification: Performance of preOpt simplifyIfEquations (simulation): time 0.000901/2.769, allocations: 0.664 MB / 1.35 GB, free: 2.383 MB / 0.8575 GB
Notification: Performance of preOpt expandDerOperator (simulation): time 0.0041/2.774, allocations: 0.817 MB / 1.351 GB, free: 1.836 MB / 0.8575 GB
Notification: Performance of preOpt clockPartitioning (simulation): time 0.0407/2.814, allocations: 13.23 MB / 1.364 GB, free: 8.457 MB / 0.8732 GB
Notification: Performance of preOpt findStateOrder (simulation): time 0.0003744/2.815, allocations: 2.25 kB / 1.364 GB, free: 8.457 MB / 0.8732 GB
Notification: Performance of preOpt replaceEdgeChange (simulation): time 0.003256/2.818, allocations: 331.1 kB / 1.364 GB, free: 8.387 MB / 0.8732 GB
Notification: Performance of preOpt inlineArrayEqn (simulation): time 0.000309/2.818, allocations: 268.2 kB / 1.365 GB, free: 8.172 MB / 0.8732 GB
Notification: Performance of preOpt removeEqualRHS (simulation): time 0.03488/2.853, allocations: 13.68 MB / 1.378 GB, free: 14.45 MB / 0.8888 GB
Warning: The model contains alias variables with redundant start and/or conflicting nominal values. It is recommended to resolve the conflicts, because otherwise the system could be hard to solve. To print the conflicting alias sets and the chosen candidates please use -d=aliasConflicts.
Notification: Performance of preOpt removeSimpleEquations (simulation): time 0.1019/2.955, allocations: 53.17 MB / 1.43 GB, free: 11.87 MB / 0.9357 GB
Notification: Performance of preOpt comSubExp (simulation): time 0.0227/2.978, allocations: 9.731 MB / 1.439 GB, free: 2.16 MB / 0.9357 GB
Notification: Performance of preOpt resolveLoops (simulation): time 0.305/3.283, allocations: 6.42 MB / 1.446 GB, free: 467.6 MB / 0.9357 GB
Notification: Performance of preOpt evalFunc (simulation): time 0.01855/3.301, allocations: 41.76 MB / 1.486 GB, free: 420.5 MB / 0.9357 GB
Notification: Performance of preOpt encapsulateWhenConditions (simulation): time 0.0001798/3.302, allocations: 118.6 kB / 1.486 GB, free: 420.5 MB / 0.9357 GB
Notification: Performance of pre-optimization done (n=894): time 1.04e-05/3.302, allocations: 0 / 1.486 GB, free: 420.5 MB / 0.9357 GB
Notification: Performance of matching and sorting (n=898): time 0.104/3.406, allocations: 36.81 MB / 1.522 GB, free: 410.7 MB / 0.9357 GB
Notification: Performance of inlineWhenForInitialization (initialization): time 0.0001445/3.406, allocations: 240.4 kB / 1.523 GB, free: 410.5 MB / 0.9357 GB
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermofluidStream 1.1.0-main/FlowControl/BasicControlValve.mo:21:3-22:118:writable] Warning: Parameter controlValve.Cvs_UK has no value, and is fixed during initialization (fixed=true), using available start value (start=0.0) as default value.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermofluidStream 1.1.0-main/FlowControl/BasicControlValve.mo:19:3-20:118:writable] Warning: Parameter controlValve.Cvs_US has no value, and is fixed during initialization (fixed=true), using available start value (start=0.0) as default value.
Notification: Performance of selectInitializationVariablesDAE (initialization): time 0.01313/3.419, allocations: 6.201 MB / 1.529 GB, free: 408.4 MB / 0.9357 GB
Notification: Performance of collectPreVariables (initialization): time 0.002504/3.422, allocations: 156.9 kB / 1.529 GB, free: 408.3 MB / 0.9357 GB
Notification: Performance of collectInitialEqns (initialization): time 0.003285/3.425, allocations: 4.017 MB / 1.533 GB, free: 404.8 MB / 0.9357 GB
Notification: Performance of collectInitialBindings (initialization): time 0.004673/3.43, allocations: 2.989 MB / 1.536 GB, free: 402.2 MB / 0.9357 GB
Notification: Performance of simplifyInitialFunctions (initialization): time 0.008179/3.438, allocations: 1.862 MB / 1.538 GB, free: 401.3 MB / 0.9357 GB
Notification: Performance of setup shared object (initialization): time 8.652e-05/3.438, allocations: 308.7 kB / 1.538 GB, free: 401 MB / 0.9357 GB
Notification: Performance of preBalanceInitialSystem (initialization): time 0.01672/3.455, allocations: 5.867 MB / 1.544 GB, free: 398 MB / 0.9357 GB
Notification: Performance of partitionIndependentBlocks (initialization): time 0.0167/3.471, allocations: 7.3 MB / 1.551 GB, free: 393.3 MB / 0.9357 GB
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[10].deltaE_system = $START.evaporator.thermalElementA[10].deltaE_system (0.0 = $START.evaporator.thermalElementA[10].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[9].deltaE_system = $START.evaporator.thermalElementA[9].deltaE_system (0.0 = $START.evaporator.thermalElementA[9].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[8].deltaE_system = $START.evaporator.thermalElementA[8].deltaE_system (0.0 = $START.evaporator.thermalElementA[8].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[7].deltaE_system = $START.evaporator.thermalElementA[7].deltaE_system (0.0 = $START.evaporator.thermalElementA[7].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[6].deltaE_system = $START.evaporator.thermalElementA[6].deltaE_system (0.0 = $START.evaporator.thermalElementA[6].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[5].deltaE_system = $START.evaporator.thermalElementA[5].deltaE_system (0.0 = $START.evaporator.thermalElementA[5].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[4].deltaE_system = $START.evaporator.thermalElementA[4].deltaE_system (0.0 = $START.evaporator.thermalElementA[4].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[3].deltaE_system = $START.evaporator.thermalElementA[3].deltaE_system (0.0 = $START.evaporator.thermalElementA[3].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[2].deltaE_system = $START.evaporator.thermalElementA[2].deltaE_system (0.0 = $START.evaporator.thermalElementA[2].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[1].deltaE_system = $START.evaporator.thermalElementA[1].deltaE_system (0.0 = $START.evaporator.thermalElementA[1].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[10].deltaE_system = $START.evaporator.thermalElementB[10].deltaE_system (0.0 = $START.evaporator.thermalElementB[10].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[9].deltaE_system = $START.evaporator.thermalElementB[9].deltaE_system (0.0 = $START.evaporator.thermalElementB[9].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[8].deltaE_system = $START.evaporator.thermalElementB[8].deltaE_system (0.0 = $START.evaporator.thermalElementB[8].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[7].deltaE_system = $START.evaporator.thermalElementB[7].deltaE_system (0.0 = $START.evaporator.thermalElementB[7].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[6].deltaE_system = $START.evaporator.thermalElementB[6].deltaE_system (0.0 = $START.evaporator.thermalElementB[6].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[5].deltaE_system = $START.evaporator.thermalElementB[5].deltaE_system (0.0 = $START.evaporator.thermalElementB[5].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[4].deltaE_system = $START.evaporator.thermalElementB[4].deltaE_system (0.0 = $START.evaporator.thermalElementB[4].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[3].deltaE_system = $START.evaporator.thermalElementB[3].deltaE_system (0.0 = $START.evaporator.thermalElementB[3].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[2].deltaE_system = $START.evaporator.thermalElementB[2].deltaE_system (0.0 = $START.evaporator.thermalElementB[2].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[1].deltaE_system = $START.evaporator.thermalElementB[1].deltaE_system (0.0 = $START.evaporator.thermalElementB[1].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[10].deltaE_system = $START.condenser.thermalElementA[10].deltaE_system (0.0 = $START.condenser.thermalElementA[10].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[9].deltaE_system = $START.condenser.thermalElementA[9].deltaE_system (0.0 = $START.condenser.thermalElementA[9].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[8].deltaE_system = $START.condenser.thermalElementA[8].deltaE_system (0.0 = $START.condenser.thermalElementA[8].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[7].deltaE_system = $START.condenser.thermalElementA[7].deltaE_system (0.0 = $START.condenser.thermalElementA[7].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[6].deltaE_system = $START.condenser.thermalElementA[6].deltaE_system (0.0 = $START.condenser.thermalElementA[6].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[5].deltaE_system = $START.condenser.thermalElementA[5].deltaE_system (0.0 = $START.condenser.thermalElementA[5].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[4].deltaE_system = $START.condenser.thermalElementA[4].deltaE_system (0.0 = $START.condenser.thermalElementA[4].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[3].deltaE_system = $START.condenser.thermalElementA[3].deltaE_system (0.0 = $START.condenser.thermalElementA[3].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[2].deltaE_system = $START.condenser.thermalElementA[2].deltaE_system (0.0 = $START.condenser.thermalElementA[2].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[1].deltaE_system = $START.condenser.thermalElementA[1].deltaE_system (0.0 = $START.condenser.thermalElementA[1].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[10].deltaE_system = $START.condenser.thermalElementB[10].deltaE_system (0.0 = $START.condenser.thermalElementB[10].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[9].deltaE_system = $START.condenser.thermalElementB[9].deltaE_system (0.0 = $START.condenser.thermalElementB[9].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[8].deltaE_system = $START.condenser.thermalElementB[8].deltaE_system (0.0 = $START.condenser.thermalElementB[8].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[7].deltaE_system = $START.condenser.thermalElementB[7].deltaE_system (0.0 = $START.condenser.thermalElementB[7].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[6].deltaE_system = $START.condenser.thermalElementB[6].deltaE_system (0.0 = $START.condenser.thermalElementB[6].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[5].deltaE_system = $START.condenser.thermalElementB[5].deltaE_system (0.0 = $START.condenser.thermalElementB[5].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[4].deltaE_system = $START.condenser.thermalElementB[4].deltaE_system (0.0 = $START.condenser.thermalElementB[4].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[3].deltaE_system = $START.condenser.thermalElementB[3].deltaE_system (0.0 = $START.condenser.thermalElementB[3].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[2].deltaE_system = $START.condenser.thermalElementB[2].deltaE_system (0.0 = $START.condenser.thermalElementB[2].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[1].deltaE_system = $START.condenser.thermalElementB[1].deltaE_system (0.0 = $START.condenser.thermalElementB[1].deltaE_system)
Notification: Performance of analyzeInitialSystem (initialization): time 0.0334/3.505, allocations: 17.12 MB / 1.567 GB, free: 378.6 MB / 0.9357 GB
Notification: Performance of solveInitialSystemEqSystem (initialization): time 6.287e-05/3.505, allocations: 12 kB / 1.567 GB, free: 378.6 MB / 0.9357 GB
Notification: Performance of matching and sorting (n=1130) (initialization): time 0.03874/3.544, allocations: 16.04 MB / 1.583 GB, free: 362.5 MB / 0.9357 GB
Notification: Performance of prepare postOptimizeDAE: time 5.824e-05/3.544, allocations: 20 kB / 1.583 GB, free: 362.5 MB / 0.9357 GB
Notification: Performance of postOpt simplifyComplexFunction (initialization): time 7.977e-05/3.544, allocations: 36 kB / 1.583 GB, free: 362.5 MB / 0.9357 GB
Notification: Performance of postOpt tearingSystem (initialization): time 0.008682/3.552, allocations: 1.957 MB / 1.585 GB, free: 360.5 MB / 0.9357 GB
Notification: Performance of postOpt solveSimpleEquations (initialization): time 0.009278/3.562, allocations: 2.249 MB / 1.587 GB, free: 358.3 MB / 0.9357 GB
Notification: Performance of postOpt calculateStrongComponentJacobians (initialization): time 0.02675/3.589, allocations: 44.08 MB / 1.63 GB, free: 311.2 MB / 0.9357 GB
Notification: Performance of postOpt simplifyAllExpressions (initialization): time 0.009708/3.598, allocations: 0.9964 MB / 1.631 GB, free: 310.2 MB / 0.9357 GB
Notification: Performance of postOpt collapseArrayExpressions (initialization): time 0.002623/3.601, allocations: 0.6677 MB / 1.632 GB, free: 309.5 MB / 0.9357 GB
Warning: The initial conditions are over specified. The following 40 initial equations are redundant, so they are removed from the initialization system:
         evaporator.thermalElementA[10].deltaE_system = $START.evaporator.thermalElementA[10].deltaE_system
         evaporator.thermalElementA[9].deltaE_system = $START.evaporator.thermalElementA[9].deltaE_system
         evaporator.thermalElementA[8].deltaE_system = $START.evaporator.thermalElementA[8].deltaE_system
         evaporator.thermalElementA[7].deltaE_system = $START.evaporator.thermalElementA[7].deltaE_system
         evaporator.thermalElementA[6].deltaE_system = $START.evaporator.thermalElementA[6].deltaE_system
         evaporator.thermalElementA[5].deltaE_system = $START.evaporator.thermalElementA[5].deltaE_system
         evaporator.thermalElementA[4].deltaE_system = $START.evaporator.thermalElementA[4].deltaE_system
         evaporator.thermalElementA[3].deltaE_system = $START.evaporator.thermalElementA[3].deltaE_system
         evaporator.thermalElementA[2].deltaE_system = $START.evaporator.thermalElementA[2].deltaE_system
         evaporator.thermalElementA[1].deltaE_system = $START.evaporator.thermalElementA[1].deltaE_system
         evaporator.thermalElementB[10].deltaE_system = $START.evaporator.thermalElementB[10].deltaE_system
         evaporator.thermalElementB[9].deltaE_system = $START.evaporator.thermalElementB[9].deltaE_system
         evaporator.thermalElementB[8].deltaE_system = $START.evaporator.thermalElementB[8].deltaE_system
         evaporator.thermalElementB[7].deltaE_system = $START.evaporator.thermalElementB[7].deltaE_system
         evaporator.thermalElementB[6].deltaE_system = $START.evaporator.thermalElementB[6].deltaE_system
         evaporator.thermalElementB[5].deltaE_system = $START.evaporator.thermalElementB[5].deltaE_system
         evaporator.thermalElementB[4].deltaE_system = $START.evaporator.thermalElementB[4].deltaE_system
         evaporator.thermalElementB[3].deltaE_system = $START.evaporator.thermalElementB[3].deltaE_system
         evaporator.thermalElementB[2].deltaE_system = $START.evaporator.thermalElementB[2].deltaE_system
         evaporator.thermalElementB[1].deltaE_system = $START.evaporator.thermalElementB[1].deltaE_system
         condenser.thermalElementA[10].deltaE_system = $START.condenser.thermalElementA[10].deltaE_system
         condenser.thermalElementA[9].deltaE_system = $START.condenser.thermalElementA[9].deltaE_system
         condenser.thermalElementA[8].deltaE_system = $START.condenser.thermalElementA[8].deltaE_system
         condenser.thermalElementA[7].deltaE_system = $START.condenser.thermalElementA[7].deltaE_system
         condenser.thermalElementA[6].deltaE_system = $START.condenser.thermalElementA[6].deltaE_system
         condenser.thermalElementA[5].deltaE_system = $START.condenser.thermalElementA[5].deltaE_system
         condenser.thermalElementA[4].deltaE_system = $START.condenser.thermalElementA[4].deltaE_system
         condenser.thermalElementA[3].deltaE_system = $START.condenser.thermalElementA[3].deltaE_system
         condenser.thermalElementA[2].deltaE_system = $START.condenser.thermalElementA[2].deltaE_system
         condenser.thermalElementA[1].deltaE_system = $START.condenser.thermalElementA[1].deltaE_system
         condenser.thermalElementB[10].deltaE_system = $START.condenser.thermalElementB[10].deltaE_system
         condenser.thermalElementB[9].deltaE_system = $START.condenser.thermalElementB[9].deltaE_system
         condenser.thermalElementB[8].deltaE_system = $START.condenser.thermalElementB[8].deltaE_system
         condenser.thermalElementB[7].deltaE_system = $START.condenser.thermalElementB[7].deltaE_system
         condenser.thermalElementB[6].deltaE_system = $START.condenser.thermalElementB[6].deltaE_system
         condenser.thermalElementB[5].deltaE_system = $START.condenser.thermalElementB[5].deltaE_system
         condenser.thermalElementB[4].deltaE_system = $START.condenser.thermalElementB[4].deltaE_system
         condenser.thermalElementB[3].deltaE_system = $START.condenser.thermalElementB[3].deltaE_system
         condenser.thermalElementB[2].deltaE_system = $START.condenser.thermalElementB[2].deltaE_system
         condenser.thermalElementB[1].deltaE_system = $START.condenser.thermalElementB[1].deltaE_system.
Notification: Performance of preBalanceInitialSystem (initialization_lambda0): time 0.01785/3.619, allocations: 8.63 MB / 1.64 GB, free: 300.9 MB / 0.9357 GB
Notification: Performance of partitionIndependentBlocks (initialization_lambda0): time 0.01318/3.632, allocations: 7.265 MB / 1.647 GB, free: 293.2 MB / 0.9357 GB
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[10].deltaE_system = $START.evaporator.thermalElementA[10].deltaE_system (0.0 = $START.evaporator.thermalElementA[10].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[9].deltaE_system = $START.evaporator.thermalElementA[9].deltaE_system (0.0 = $START.evaporator.thermalElementA[9].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[8].deltaE_system = $START.evaporator.thermalElementA[8].deltaE_system (0.0 = $START.evaporator.thermalElementA[8].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[7].deltaE_system = $START.evaporator.thermalElementA[7].deltaE_system (0.0 = $START.evaporator.thermalElementA[7].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[6].deltaE_system = $START.evaporator.thermalElementA[6].deltaE_system (0.0 = $START.evaporator.thermalElementA[6].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[5].deltaE_system = $START.evaporator.thermalElementA[5].deltaE_system (0.0 = $START.evaporator.thermalElementA[5].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[4].deltaE_system = $START.evaporator.thermalElementA[4].deltaE_system (0.0 = $START.evaporator.thermalElementA[4].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[3].deltaE_system = $START.evaporator.thermalElementA[3].deltaE_system (0.0 = $START.evaporator.thermalElementA[3].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[2].deltaE_system = $START.evaporator.thermalElementA[2].deltaE_system (0.0 = $START.evaporator.thermalElementA[2].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[1].deltaE_system = $START.evaporator.thermalElementA[1].deltaE_system (0.0 = $START.evaporator.thermalElementA[1].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[10].deltaE_system = $START.evaporator.thermalElementB[10].deltaE_system (0.0 = $START.evaporator.thermalElementB[10].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[9].deltaE_system = $START.evaporator.thermalElementB[9].deltaE_system (0.0 = $START.evaporator.thermalElementB[9].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[8].deltaE_system = $START.evaporator.thermalElementB[8].deltaE_system (0.0 = $START.evaporator.thermalElementB[8].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[7].deltaE_system = $START.evaporator.thermalElementB[7].deltaE_system (0.0 = $START.evaporator.thermalElementB[7].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[6].deltaE_system = $START.evaporator.thermalElementB[6].deltaE_system (0.0 = $START.evaporator.thermalElementB[6].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[5].deltaE_system = $START.evaporator.thermalElementB[5].deltaE_system (0.0 = $START.evaporator.thermalElementB[5].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[4].deltaE_system = $START.evaporator.thermalElementB[4].deltaE_system (0.0 = $START.evaporator.thermalElementB[4].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[3].deltaE_system = $START.evaporator.thermalElementB[3].deltaE_system (0.0 = $START.evaporator.thermalElementB[3].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[2].deltaE_system = $START.evaporator.thermalElementB[2].deltaE_system (0.0 = $START.evaporator.thermalElementB[2].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[1].deltaE_system = $START.evaporator.thermalElementB[1].deltaE_system (0.0 = $START.evaporator.thermalElementB[1].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[10].deltaE_system = $START.condenser.thermalElementA[10].deltaE_system (0.0 = $START.condenser.thermalElementA[10].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[9].deltaE_system = $START.condenser.thermalElementA[9].deltaE_system (0.0 = $START.condenser.thermalElementA[9].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[8].deltaE_system = $START.condenser.thermalElementA[8].deltaE_system (0.0 = $START.condenser.thermalElementA[8].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[7].deltaE_system = $START.condenser.thermalElementA[7].deltaE_system (0.0 = $START.condenser.thermalElementA[7].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[6].deltaE_system = $START.condenser.thermalElementA[6].deltaE_system (0.0 = $START.condenser.thermalElementA[6].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[5].deltaE_system = $START.condenser.thermalElementA[5].deltaE_system (0.0 = $START.condenser.thermalElementA[5].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[4].deltaE_system = $START.condenser.thermalElementA[4].deltaE_system (0.0 = $START.condenser.thermalElementA[4].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[3].deltaE_system = $START.condenser.thermalElementA[3].deltaE_system (0.0 = $START.condenser.thermalElementA[3].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[2].deltaE_system = $START.condenser.thermalElementA[2].deltaE_system (0.0 = $START.condenser.thermalElementA[2].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[1].deltaE_system = $START.condenser.thermalElementA[1].deltaE_system (0.0 = $START.condenser.thermalElementA[1].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[10].deltaE_system = $START.condenser.thermalElementB[10].deltaE_system (0.0 = $START.condenser.thermalElementB[10].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[9].deltaE_system = $START.condenser.thermalElementB[9].deltaE_system (0.0 = $START.condenser.thermalElementB[9].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[8].deltaE_system = $START.condenser.thermalElementB[8].deltaE_system (0.0 = $START.condenser.thermalElementB[8].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[7].deltaE_system = $START.condenser.thermalElementB[7].deltaE_system (0.0 = $START.condenser.thermalElementB[7].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[6].deltaE_system = $START.condenser.thermalElementB[6].deltaE_system (0.0 = $START.condenser.thermalElementB[6].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[5].deltaE_system = $START.condenser.thermalElementB[5].deltaE_system (0.0 = $START.condenser.thermalElementB[5].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[4].deltaE_system = $START.condenser.thermalElementB[4].deltaE_system (0.0 = $START.condenser.thermalElementB[4].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[3].deltaE_system = $START.condenser.thermalElementB[3].deltaE_system (0.0 = $START.condenser.thermalElementB[3].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[2].deltaE_system = $START.condenser.thermalElementB[2].deltaE_system (0.0 = $START.condenser.thermalElementB[2].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[1].deltaE_system = $START.condenser.thermalElementB[1].deltaE_system (0.0 = $START.condenser.thermalElementB[1].deltaE_system)
Notification: Performance of analyzeInitialSystem (initialization_lambda0): time 0.02667/3.659, allocations: 17.02 MB / 1.664 GB, free: 275.1 MB / 0.9357 GB
Notification: Performance of solveInitialSystemEqSystem (initialization_lambda0): time 4.584e-05/3.659, allocations: 12 kB / 1.664 GB, free: 275.1 MB / 0.9357 GB
Notification: Performance of matching and sorting (n=1130) (initialization_lambda0): time 0.03629/3.695, allocations: 15.94 MB / 1.68 GB, free: 259.2 MB / 0.9357 GB
Notification: Performance of prepare postOptimizeDAE: time 3.52e-05/3.695, allocations: 23.84 kB / 1.68 GB, free: 259.2 MB / 0.9357 GB
Notification: Performance of postOpt simplifyComplexFunction (initialization): time 6.5e-05/3.695, allocations: 39.72 kB / 1.68 GB, free: 259.1 MB / 0.9357 GB
Notification: Performance of postOpt tearingSystem (initialization): time 0.008052/3.703, allocations: 1.956 MB / 1.682 GB, free: 257.1 MB / 0.9357 GB
Notification: Performance of postOpt solveSimpleEquations (initialization): time 0.008633/3.712, allocations: 2.236 MB / 1.684 GB, free: 254.9 MB / 0.9357 GB
Notification: Performance of postOpt calculateStrongComponentJacobians (initialization): time 0.02615/3.738, allocations: 44.05 MB / 1.727 GB, free: 207.8 MB / 0.9357 GB
Notification: Performance of postOpt simplifyAllExpressions (initialization): time 0.009341/3.747, allocations: 0.9895 MB / 1.728 GB, free: 206.9 MB / 0.9357 GB
Notification: Performance of postOpt collapseArrayExpressions (initialization): time 0.002582/3.75, allocations: 0.6638 MB / 1.728 GB, free: 206.2 MB / 0.9357 GB
Warning: The initial conditions are over specified. The following 40 initial equations are redundant, so they are removed from the initialization_lambda0 system:
         evaporator.thermalElementA[10].deltaE_system = $START.evaporator.thermalElementA[10].deltaE_system
         evaporator.thermalElementA[9].deltaE_system = $START.evaporator.thermalElementA[9].deltaE_system
         evaporator.thermalElementA[8].deltaE_system = $START.evaporator.thermalElementA[8].deltaE_system
         evaporator.thermalElementA[7].deltaE_system = $START.evaporator.thermalElementA[7].deltaE_system
         evaporator.thermalElementA[6].deltaE_system = $START.evaporator.thermalElementA[6].deltaE_system
         evaporator.thermalElementA[5].deltaE_system = $START.evaporator.thermalElementA[5].deltaE_system
         evaporator.thermalElementA[4].deltaE_system = $START.evaporator.thermalElementA[4].deltaE_system
         evaporator.thermalElementA[3].deltaE_system = $START.evaporator.thermalElementA[3].deltaE_system
         evaporator.thermalElementA[2].deltaE_system = $START.evaporator.thermalElementA[2].deltaE_system
         evaporator.thermalElementA[1].deltaE_system = $START.evaporator.thermalElementA[1].deltaE_system
         evaporator.thermalElementB[10].deltaE_system = $START.evaporator.thermalElementB[10].deltaE_system
         evaporator.thermalElementB[9].deltaE_system = $START.evaporator.thermalElementB[9].deltaE_system
         evaporator.thermalElementB[8].deltaE_system = $START.evaporator.thermalElementB[8].deltaE_system
         evaporator.thermalElementB[7].deltaE_system = $START.evaporator.thermalElementB[7].deltaE_system
         evaporator.thermalElementB[6].deltaE_system = $START.evaporator.thermalElementB[6].deltaE_system
         evaporator.thermalElementB[5].deltaE_system = $START.evaporator.thermalElementB[5].deltaE_system
         evaporator.thermalElementB[4].deltaE_system = $START.evaporator.thermalElementB[4].deltaE_system
         evaporator.thermalElementB[3].deltaE_system = $START.evaporator.thermalElementB[3].deltaE_system
         evaporator.thermalElementB[2].deltaE_system = $START.evaporator.thermalElementB[2].deltaE_system
         evaporator.thermalElementB[1].deltaE_system = $START.evaporator.thermalElementB[1].deltaE_system
         condenser.thermalElementA[10].deltaE_system = $START.condenser.thermalElementA[10].deltaE_system
         condenser.thermalElementA[9].deltaE_system = $START.condenser.thermalElementA[9].deltaE_system
         condenser.thermalElementA[8].deltaE_system = $START.condenser.thermalElementA[8].deltaE_system
         condenser.thermalElementA[7].deltaE_system = $START.condenser.thermalElementA[7].deltaE_system
         condenser.thermalElementA[6].deltaE_system = $START.condenser.thermalElementA[6].deltaE_system
         condenser.thermalElementA[5].deltaE_system = $START.condenser.thermalElementA[5].deltaE_system
         condenser.thermalElementA[4].deltaE_system = $START.condenser.thermalElementA[4].deltaE_system
         condenser.thermalElementA[3].deltaE_system = $START.condenser.thermalElementA[3].deltaE_system
         condenser.thermalElementA[2].deltaE_system = $START.condenser.thermalElementA[2].deltaE_system
         condenser.thermalElementA[1].deltaE_system = $START.condenser.thermalElementA[1].deltaE_system
         condenser.thermalElementB[10].deltaE_system = $START.condenser.thermalElementB[10].deltaE_system
         condenser.thermalElementB[9].deltaE_system = $START.condenser.thermalElementB[9].deltaE_system
         condenser.thermalElementB[8].deltaE_system = $START.condenser.thermalElementB[8].deltaE_system
         condenser.thermalElementB[7].deltaE_system = $START.condenser.thermalElementB[7].deltaE_system
         condenser.thermalElementB[6].deltaE_system = $START.condenser.thermalElementB[6].deltaE_system
         condenser.thermalElementB[5].deltaE_system = $START.condenser.thermalElementB[5].deltaE_system
         condenser.thermalElementB[4].deltaE_system = $START.condenser.thermalElementB[4].deltaE_system
         condenser.thermalElementB[3].deltaE_system = $START.condenser.thermalElementB[3].deltaE_system
         condenser.thermalElementB[2].deltaE_system = $START.condenser.thermalElementB[2].deltaE_system
         condenser.thermalElementB[1].deltaE_system = $START.condenser.thermalElementB[1].deltaE_system.
Notification: Model statistics after passing the back-end for initialization:
 * Number of independent subsystems: 156
 * Number of states: 0 ()
 * Number of discrete variables: 46 (receiver.medium.phase,singleSensorSelect5.inlet.state.phase,sensorVaporQuality.inlet.state.phase,singleFlowSensor.outlet.state.phase,receiver.outlet.state.phase,receiver.inlet.state.phase,evaporator.thermalElementB[10].state.phase,evaporator.thermalElementB[9].state.phase,evaporator.thermalElementB[9].outlet.state.phase,evaporator.thermalElementB[8].state.phase,evaporator.thermalElementB[8].outlet.state.phase,evaporator.thermalElementB[7].state.phase,evaporator.thermalElementB[7].outlet.state.phase,evaporator.thermalElementB[6].state.phase,evaporator.thermalElementB[6].outlet.state.phase,evaporator.thermalElementB[5].state.phase,evaporator.thermalElementB[5].outlet.state.phase,evaporator.thermalElementB[4].state.phase,evaporator.thermalElementB[4].outlet.state.phase,evaporator.thermalElementB[3].state.phase,evaporator.thermalElementB[3].outlet.state.phase,evaporator.thermalElementB[2].state.phase,evaporator.thermalElementB[2].outlet.state.phase,evaporator.thermalElementB[1].state.phase,evaporator.thermalElementB[1].outlet.state.phase,condenser.thermalElementB[10].state.phase,condenser.thermalElementB[9].state.phase,condenser.thermalElementB[9].outlet.state.phase,condenser.thermalElementB[8].state.phase,condenser.thermalElementB[8].outlet.state.phase,condenser.thermalElementB[7].state.phase,condenser.thermalElementB[7].outlet.state.phase,condenser.thermalElementB[6].state.phase,condenser.thermalElementB[6].outlet.state.phase,condenser.thermalElementB[5].state.phase,condenser.thermalElementB[5].outlet.state.phase,condenser.thermalElementB[4].state.phase,condenser.thermalElementB[4].outlet.state.phase,condenser.thermalElementB[3].state.phase,condenser.thermalElementB[3].outlet.state.phase,condenser.thermalElementB[2].state.phase,condenser.thermalElementB[2].outlet.state.phase,condenser.thermalElementB[1].state.phase,condenser.thermalElementB[1].outlet.state.phase,PI_CompressorPressure.I.local_reset,PI_CompressorTemperature.I.local_reset)
 * Number of discrete states: 0 ()
 * Number of clocked states: 0 ()
 * Top-level inputs: 0
Notification: Strong component statistics for initialization (849):
 * Single equations (assignments): 781
 * Array equations: 0
 * Algorithm blocks: 0
 * Record equations: 44
 * When equations: 0
 * If-equations: 0
 * Equation systems (not torn): 0
 * Torn equation systems: 24
 * Mixed (continuous/discrete) equation systems: 0
Notification: Torn system details for strict tearing set:
 * Linear torn systems (#iteration vars, #inner vars, density): 23 systems
   {(1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,23,100.0%), (1,12,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,12,100.0%)}
 * Non-linear torn systems (#iteration vars, #inner vars): 1 system
   {(1,1)}
Notification: Performance of prepare postOptimizeDAE: time 0.004342/3.754, allocations: 0.9461 MB / 1.729 GB, free: 205.2 MB / 0.9357 GB
Notification: Performance of postOpt lateInlineFunction (simulation): time 0.003321/3.758, allocations: 0.8216 MB / 1.73 GB, free: 204.4 MB / 0.9357 GB
Notification: Performance of postOpt wrapFunctionCalls (simulation): time 0.04429/3.802, allocations: 24.07 MB / 1.754 GB, free: 180.3 MB / 0.9357 GB
Notification: Performance of postOpt inlineArrayEqn (simulation): time 0.02858/3.831, allocations: 14.62 MB / 1.768 GB, free: 165.6 MB / 0.9357 GB
Notification: Performance of postOpt constantLinearSystem (simulation): time 7.478e-05/3.831, allocations: 16 kB / 1.768 GB, free: 165.6 MB / 0.9357 GB
Notification: Performance of postOpt simplifysemiLinear (simulation): time 0.000198/3.831, allocations: 43.83 kB / 1.768 GB, free: 165.6 MB / 0.9357 GB
Warning: The model contains alias variables with redundant start and/or conflicting nominal values. It is recommended to resolve the conflicts, because otherwise the system could be hard to solve. To print the conflicting alias sets and the chosen candidates please use -d=aliasConflicts.
Notification: Performance of postOpt removeSimpleEquations (simulation): time 0.0616/3.893, allocations: 32.26 MB / 1.799 GB, free: 132.7 MB / 0.9357 GB
Notification: Performance of postOpt simplifyComplexFunction (simulation): time 6.451e-05/3.893, allocations: 4 kB / 1.799 GB, free: 132.6 MB / 0.9357 GB
Notification: Performance of postOpt solveSimpleEquations (simulation): time 0.00875/3.901, allocations: 2.087 MB / 1.802 GB, free: 130.6 MB / 0.9357 GB
Notification: Performance of postOpt tearingSystem (simulation): time 0.006496/3.908, allocations: 1.877 MB / 1.803 GB, free: 128.6 MB / 0.9357 GB
Notification: Performance of postOpt inputDerivativesUsed (simulation): time 0.002112/3.91, allocations: 355.7 kB / 1.804 GB, free: 128.3 MB / 0.9357 GB
Notification: Performance of postOpt calculateStrongComponentJacobians (simulation): time 0.02709/3.937, allocations: 44.32 MB / 1.847 GB, free: 80.7 MB / 0.9357 GB
Notification: Performance of postOpt calculateStateSetsJacobians (simulation): time 2.264e-06/3.937, allocations: 0 / 1.847 GB, free: 80.7 MB / 0.9357 GB
Notification: Performance of postOpt symbolicJacobian (simulation): time 0.04809/3.985, allocations: 24.14 MB / 1.871 GB, free: 56.34 MB / 0.9357 GB
Notification: Performance of postOpt removeConstants (simulation): time 0.008265/3.994, allocations: 2.129 MB / 1.873 GB, free: 54.18 MB / 0.9357 GB
Notification: Performance of postOpt simplifyTimeIndepFuncCalls (simulation): time 0.003524/3.997, allocations: 208 kB / 1.873 GB, free: 53.98 MB / 0.9357 GB
Notification: Performance of postOpt simplifyAllExpressions (simulation): time 0.009971/4.007, allocations: 1.321 MB / 1.874 GB, free: 52.65 MB / 0.9357 GB
Notification: Performance of postOpt findZeroCrossings (simulation): time 0.002384/4.01, allocations: 0.6702 MB / 1.875 GB, free: 51.98 MB / 0.9357 GB
Notification: Performance of postOpt collapseArrayExpressions (simulation): time 0.002103/4.012, allocations: 479.7 kB / 1.875 GB, free: 51.51 MB / 0.9357 GB
Notification: Performance of sorting global known variables: time 0.007507/4.019, allocations: 4.247 MB / 1.879 GB, free: 47.3 MB / 0.9357 GB
Notification: Performance of sort global known variables: time 6.51e-07/4.019, allocations: 0 / 1.879 GB, free: 47.3 MB / 0.9357 GB
Notification: Performance of remove unused functions: time 0.03881/4.058, allocations: 7.483 MB / 1.887 GB, free: 40.24 MB / 0.9357 GB
Notification: Model statistics after passing the back-end for simulation:
 * Number of independent subsystems: 6
 * Number of states: 53 (condenser.thermalElementB[1].h,condenser.thermalElementB[2].h,condenser.thermalElementB[3].h,condenser.thermalElementB[4].h,condenser.thermalElementB[5].h,condenser.thermalElementB[6].h,condenser.thermalElementB[7].h,condenser.thermalElementB[8].h,condenser.thermalElementB[9].h,condenser.thermalElementB[10].h,condenser.thermalElementA[1].inlet.m_flow,condenser.thermalElementA[1].h,condenser.thermalElementA[2].h,condenser.thermalElementA[3].h,condenser.thermalElementA[4].h,condenser.thermalElementA[5].h,condenser.thermalElementA[6].h,condenser.thermalElementA[7].h,condenser.thermalElementA[8].h,condenser.thermalElementA[9].h,condenser.thermalElementA[10].h,evaporator.thermalElementB[1].h,evaporator.thermalElementB[2].h,evaporator.thermalElementB[3].h,evaporator.thermalElementB[4].h,evaporator.thermalElementB[5].h,evaporator.thermalElementB[6].h,evaporator.thermalElementB[7].h,evaporator.thermalElementB[8].h,evaporator.thermalElementB[9].h,evaporator.thermalElementB[10].h,evaporator.thermalElementA[1].inlet.m_flow,evaporator.thermalElementA[1].h,evaporator.thermalElementA[2].h,evaporator.thermalElementA[3].h,evaporator.thermalElementA[4].h,evaporator.thermalElementA[5].h,evaporator.thermalElementA[6].h,evaporator.thermalElementA[7].h,evaporator.thermalElementA[8].h,evaporator.thermalElementA[9].h,evaporator.thermalElementA[10].h,receiver.M,receiver.U_med,PI.x,PI1.x,multiSensor_Tp1.p,multiSensor_Tp1.T,compressor.m_flow,PI_Valve.x,firstOrderValve.y,PI_CompressorTemperature.I.y,PI_CompressorPressure.I.y)
 * Number of discrete variables: 68 (condenser.thermalElementB[1].state.phase,condenser.thermalElementB[1].outlet.state.phase,condenser.thermalElementB[2].outlet.state.phase,condenser.thermalElementB[2].state.phase,condenser.thermalElementB[3].outlet.state.phase,condenser.thermalElementB[3].state.phase,condenser.thermalElementB[5].outlet.state.phase,condenser.thermalElementB[5].state.phase,condenser.thermalElementB[9].outlet.state.phase,condenser.thermalElementB[9].state.phase,receiver.inlet.state.phase,condenser.thermalElementB[10].state.phase,condenser.thermalElementB[8].outlet.state.phase,condenser.thermalElementB[8].state.phase,condenser.thermalElementB[7].outlet.state.phase,condenser.thermalElementB[7].state.phase,condenser.thermalElementB[6].outlet.state.phase,condenser.thermalElementB[6].state.phase,condenser.thermalElementB[4].outlet.state.phase,condenser.thermalElementB[4].state.phase,evaporator.thermalElementB[1].state.phase,evaporator.thermalElementB[1].outlet.state.phase,evaporator.thermalElementB[2].outlet.state.phase,evaporator.thermalElementB[2].state.phase,evaporator.thermalElementB[3].outlet.state.phase,evaporator.thermalElementB[3].state.phase,evaporator.thermalElementB[9].outlet.state.phase,evaporator.thermalElementB[9].state.phase,singleFlowSensor.outlet.state.phase,singleSensorSelect5.inlet.state.phase,evaporator.thermalElementB[10].state.phase,evaporator.thermalElementB[8].outlet.state.phase,evaporator.thermalElementB[8].state.phase,evaporator.thermalElementB[7].outlet.state.phase,evaporator.thermalElementB[7].state.phase,evaporator.thermalElementB[6].outlet.state.phase,evaporator.thermalElementB[6].state.phase,evaporator.thermalElementB[5].outlet.state.phase,evaporator.thermalElementB[5].state.phase,evaporator.thermalElementB[4].outlet.state.phase,evaporator.thermalElementB[4].state.phase,sensorVaporQuality.inlet.state.phase,receiver.outlet.state.phase,$cse1.phase,$cse2.phase,$cse3.phase,$cse4.phase,$cse5.phase,$cse6.phase,$cse7.phase,$cse8.phase,$cse9.phase,$cse10.phase,$cse11.phase,$cse12.phase,$cse13.phase,$cse14.phase,$cse15.phase,$cse16.phase,$cse17.phase,$cse18.phase,$cse19.phase,$cse20.phase,$cse21.phase,$cse22,$cse25.phase,$cse27.phase,$cse30.phase)
 * Number of discrete states: 0 ()
 * Number of clocked states: 0 ()
 * Top-level inputs: 0
Notification: Strong component statistics for simulation (837):
 * Single equations (assignments): 767
 * Array equations: 0
 * Algorithm blocks: 0
 * Record equations: 45
 * When equations: 0
 * If-equations: 0
 * Equation systems (not torn): 0
 * Torn equation systems: 25
 * Mixed (continuous/discrete) equation systems: 0
Notification: Torn system details for strict tearing set:
 * Linear torn systems (#iteration vars, #inner vars, density): 23 systems
   {(1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,23,100.0%), (1,12,100.0%), (1,12,100.0%)}
 * Non-linear torn systems (#iteration vars, #inner vars): 2 systems
   {(1,1), (1,3)}
Notification: Performance of Backend phase and start with SimCode phase: time 0.4703/4.528, allocations: 51.41 MB / 1.937 GB, free: 425.4 MB / 0.9357 GB
Notification: Performance of simCode: created initialization part: time 0.1697/4.698, allocations: 69.67 MB / 2.005 GB, free: 405.2 MB / 0.9357 GB
Notification: Performance of simCode: created event and clocks part: time 1.089e-05/4.698, allocations: 9.344 kB / 2.005 GB, free: 405.2 MB / 0.9357 GB
Notification: Performance of simCode: created simulation system equations: time 0.01839/4.717, allocations: 10.48 MB / 2.015 GB, free: 398.3 MB / 0.9357 GB
Notification: Performance of simCode: created of all other equations (e.g. parameter, nominal, assert, etc): time 0.0224/4.739, allocations: 3.983 MB / 2.019 GB, free: 396.1 MB / 0.9357 GB
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect5.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorCondenserSubcooling.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorEvaporatorSuperheating.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality3.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality2.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality1.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getFlowUnit(singleFlowSensor.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect4.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect3.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect2.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect1.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect5.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorCondenserSubcooling.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorEvaporatorSuperheating.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality3.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality2.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality1.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getFlowUnit(singleFlowSensor.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect4.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect3.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect2.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect1.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorCondenserSubcooling.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorEvaporatorSuperheating.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect5.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality3.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality2.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality1.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getFlowUnit(singleFlowSensor.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect4.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect3.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect2.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect1.quantity)
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10264:11-10264:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect.quantity)
Notification: Performance of simCode: created linear, non-linear and system jacobian parts: time 0.2613/5, allocations: 128 MB / 2.144 GB, free: 271.1 MB / 0.9357 GB
Notification: Performance of simCode: some other stuff during SimCode phase: time 0.009092/5.009, allocations: 6.737 MB / 2.151 GB, free: 264.3 MB / 0.9357 GB
Notification: Performance of simCode: alias equations: time 0.02673/5.036, allocations: 11.27 MB / 2.162 GB, free: 253 MB / 0.9357 GB
Notification: Performance of simCode: all other stuff during SimCode phase: time 0.01228/5.049, allocations: 5.54 MB / 2.167 GB, free: 247.5 MB / 0.9357 GB
Notification: Performance of SimCode: time 1.082e-06/5.049, allocations: 0 / 2.167 GB, free: 247.5 MB / 0.9357 GB
Notification: Performance of buildModelFMU: Generate the FMI files: time 0.7743/5.823, allocations: 389.4 MB / 2.547 GB, free: 252.2 MB / 0.9357 GB
Notification: Performance of buildModelFMU: configured platform static using cached values: time 0.0001802/5.823, allocations: 260.8 kB / 2.548 GB, free: 251.8 MB / 0.9357 GB
Notification: Performance of buildModelFMU: Generate platform static: time 15.29/21.11, allocations: 0 / 2.548 GB, free: 251.8 MB / 0.9357 GB
(rm -f ThermofluidStream_ThermofluidStream.Examples.VaporCycle.pipe ; mkfifo ThermofluidStream_ThermofluidStream.Examples.VaporCycle.pipe ; head -c 1048576 < ThermofluidStream_ThermofluidStream.Examples.VaporCycle.pipe >> ../files/ThermofluidStream_ThermofluidStream.Examples.VaporCycle.sim & /home/hudson/saved_omc/OMSimulator/install/bin/OMSimulator -r=ThermofluidStream_ThermofluidStream.Examples.VaporCycle_res.mat --tempDir=temp_ThermofluidStream_ThermofluidStream_Examples_VaporCycle_fmu --startTime=0 --stopTime=1500 --timeout=1200 --tolerance=1e-06 ThermofluidStream_ThermofluidStream_Examples_VaporCycle.fmu > ThermofluidStream_ThermofluidStream.Examples.VaporCycle.pipe 2>&1)