Running: ./testmodel.py --libraries=/home/hudson/saved_omc/libraries/.openmodelica/libraries --ompython_omhome=/usr ThermofluidStream_dev_ThermofluidStream.Examples.HeatPump.conf.json
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.0.0+maint.om/package.mo", uses=false)
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.0.0+maint.om/package.mo", uses=false)
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.0.0+maint.om/package.mo", uses=false)
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermofluidStream 1.1.0-main/package.mo", uses=false)
Using package ThermofluidStream with version 1.1.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermofluidStream 1.1.0-main/package.mo)
Using package Modelica with version 4.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.0.0+maint.om/package.mo)
Using package Complex with version 4.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.0.0+maint.om/package.mo)
Using package ModelicaServices with version 4.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.0.0+maint.om/package.mo)
Running command: translateModel(ThermofluidStream.Examples.HeatPump,tolerance=1e-06,outputFormat="mat",numberOfIntervals=2000,variableFilter="PI.I.y|PI1.I.y|PI2.I.y|Time|accumulator.M|accumulator.U_med|compressor.m_flow|compressor.omega|compressor.phi|condenser.thermalElementA.10..h|condenser.thermalElementA.1..h|condenser.thermalElementA.2..h|condenser.thermalElementA.3..h|condenser.thermalElementA.4..h|condenser.thermalElementA.5..h|condenser.thermalElementA.6..h|condenser.thermalElementA.7..h|condenser.thermalElementA.8..h|condenser.thermalElementA.9..h|condenser.thermalElementB.10..h|condenser.thermalElementB.1..h|condenser.thermalElementB.2..h|condenser.thermalElementB.3..h|condenser.thermalElementB.4..h|condenser.thermalElementB.5..h|condenser.thermalElementB.6..h|condenser.thermalElementB.7..h|condenser.thermalElementB.8..h|condenser.thermalElementB.9..h|controlValve.inlet.m_flow|evaporator.thermalElementA.10..h|evaporator.thermalElementA.1..h|evaporator.thermalElementA.2..h|evaporator.thermalElementA.3..h|evaporator.thermalElementA.4..h|evaporator.thermalElementA.5..h|evaporator.thermalElementA.6..h|evaporator.thermalElementA.7..h|evaporator.thermalElementA.8..h|evaporator.thermalElementA.9..h|evaporator.thermalElementB.10..h|evaporator.thermalElementB.1..h|evaporator.thermalElementB.2..h|evaporator.thermalElementB.3..h|evaporator.thermalElementB.4..h|evaporator.thermalElementB.5..h|evaporator.thermalElementB.6..h|evaporator.thermalElementB.7..h|evaporator.thermalElementB.8..h|evaporator.thermalElementB.9..h|fan.m_flow|fan1.m_flow|firstOrder2.y|heatCapacitor.T|receiver.M|receiver.U_med|sensorVaporQuality8.value",fileNamePrefix="ThermofluidStream_dev_ThermofluidStream.Examples.HeatPump")
translateModel(ThermofluidStream.Examples.HeatPump,tolerance=1e-06,outputFormat="mat",numberOfIntervals=2000,variableFilter="PI.I.y|PI1.I.y|PI2.I.y|Time|accumulator.M|accumulator.U_med|compressor.m_flow|compressor.omega|compressor.phi|condenser.thermalElementA.10..h|condenser.thermalElementA.1..h|condenser.thermalElementA.2..h|condenser.thermalElementA.3..h|condenser.thermalElementA.4..h|condenser.thermalElementA.5..h|condenser.thermalElementA.6..h|condenser.thermalElementA.7..h|condenser.thermalElementA.8..h|condenser.thermalElementA.9..h|condenser.thermalElementB.10..h|condenser.thermalElementB.1..h|condenser.thermalElementB.2..h|condenser.thermalElementB.3..h|condenser.thermalElementB.4..h|condenser.thermalElementB.5..h|condenser.thermalElementB.6..h|condenser.thermalElementB.7..h|condenser.thermalElementB.8..h|condenser.thermalElementB.9..h|controlValve.inlet.m_flow|evaporator.thermalElementA.10..h|evaporator.thermalElementA.1..h|evaporator.thermalElementA.2..h|evaporator.thermalElementA.3..h|evaporator.thermalElementA.4..h|evaporator.thermalElementA.5..h|evaporator.thermalElementA.6..h|evaporator.thermalElementA.7..h|evaporator.thermalElementA.8..h|evaporator.thermalElementA.9..h|evaporator.thermalElementB.10..h|evaporator.thermalElementB.1..h|evaporator.thermalElementB.2..h|evaporator.thermalElementB.3..h|evaporator.thermalElementB.4..h|evaporator.thermalElementB.5..h|evaporator.thermalElementB.6..h|evaporator.thermalElementB.7..h|evaporator.thermalElementB.8..h|evaporator.thermalElementB.9..h|fan.m_flow|fan1.m_flow|firstOrder2.y|heatCapacitor.T|receiver.M|receiver.U_med|sensorVaporQuality8.value",fileNamePrefix="ThermofluidStream_dev_ThermofluidStream.Examples.HeatPump")
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.0.0+maint.om/package.mo): time 0.001519/0.001519, allocations: 111.3 kB / 15.23 MB, free: 0.6406 MB / 14.72 MB
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.0.0+maint.om/package.mo): time 0.002017/0.002017, allocations: 196.7 kB / 16.14 MB, free: 6.715 MB / 14.72 MB
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.0.0+maint.om/package.mo): time 1.502/1.502, allocations: 222.9 MB / 239.8 MB, free: 4.609 MB / 190.1 MB
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermofluidStream 1.1.0-main/package.mo): time 0.872/0.872, allocations: 93.72 MB / 383.7 MB, free: 7.164 MB / 318.1 MB
Notification: Performance of FrontEnd - loaded program: time 0.001527/0.001527, allocations: 86.3 kB / 462.7 MB, free: 22.2 MB / 350.1 MB
Notification: Performance of FrontEnd - Absyn->SCode: time 0.1452/0.1468, allocations: 68.27 MB / 0.5185 GB, free: 7.484 MB / 398.1 MB
Notification: Performance of NFInst.instantiate(ThermofluidStream.Examples.HeatPump): time 1.225/1.372, allocations: 394.5 MB / 0.9038 GB, free: 252 kB / 0.6231 GB
Notification: Performance of NFInst.instExpressions: time 0.9722/2.344, allocations: 237.9 MB / 1.136 GB, free: 1.125 MB / 0.7637 GB
Notification: Performance of NFInst.updateImplicitVariability: time 0.009454/2.353, allocations: 158.3 kB / 1.136 GB, free: 1.125 MB / 0.7637 GB
Notification: Performance of NFTyping.typeComponents: time 0.009615/2.363, allocations: 2.026 MB / 1.138 GB, free: 1.125 MB / 0.7637 GB
Notification: Performance of NFTyping.typeBindings: time 0.05186/2.415, allocations: 7.449 MB / 1.146 GB, free: 1.105 MB / 0.7637 GB
Notification: Performance of NFTyping.typeClassSections: time 0.09175/2.507, allocations: 17.65 MB / 1.163 GB, free: 1.023 MB / 0.7637 GB
Notification: Performance of NFFlatten.flatten: time 0.02795/2.535, allocations: 18.91 MB / 1.181 GB, free: 1.004 MB / 0.7637 GB
Notification: Performance of NFFlatten.resolveConnections: time 0.009292/2.544, allocations: 4.071 MB / 1.185 GB, free: 15.76 MB / 0.7794 GB
Notification: Performance of NFEvalConstants.evaluate: time 0.0701/2.614, allocations: 29.86 MB / 1.214 GB, free: 8.012 MB / 0.7794 GB
Notification: Performance of NFSimplifyModel.simplify: time 0.01663/2.631, allocations: 6.387 MB / 1.221 GB, free: 3.184 MB / 0.7794 GB
Notification: Performance of NFPackage.collectConstants: time 0.005664/2.637, allocations: 0.625 MB / 1.221 GB, free: 2.559 MB / 0.7794 GB
Notification: Performance of NFFlatten.collectFunctions: time 0.3711/3.008, allocations: 200 MB / 1.417 GB, free: 0.6719 MB / 0.9669 GB
Notification: Performance of NFScalarize.scalarize: time 0.007958/3.016, allocations: 2.09 MB / 1.419 GB, free: 15.4 MB / 0.9825 GB
Notification: Performance of NFVerifyModel.verify: time 0.02339/3.039, allocations: 5.822 MB / 1.424 GB, free: 11.14 MB / 0.9825 GB
Notification: Performance of NFConvertDAE.convert: time 1.865/4.904, allocations: 190.8 MB / 1.611 GB, free: 183.6 MB / 1.029 GB
Notification: Performance of FrontEnd - DAE generated: time 9.117e-06/4.905, allocations: 0 / 1.611 GB, free: 183.6 MB / 1.029 GB
Notification: Performance of FrontEnd: time 2.765e-06/4.905, allocations: 0 / 1.611 GB, free: 183.6 MB / 1.029 GB
Notification: Performance of Transformations before backend: time 0.0008231/4.905, allocations: 4.781 kB / 1.611 GB, free: 183.6 MB / 1.029 GB
Notification: Model statistics after passing the front-end and creating the data structures used by the back-end:
 * Number of equations: 2278
 * Number of variables: 2278
Notification: Performance of Generate backend data structure: time 0.1256/5.031, allocations: 18.02 MB / 1.628 GB, free: 167.8 MB / 1.029 GB
Notification: Performance of prepare preOptimizeDAE: time 7.128e-05/5.031, allocations: 12.03 kB / 1.628 GB, free: 167.8 MB / 1.029 GB
Notification: Performance of preOpt normalInlineFunction (simulation): time 0.01676/5.048, allocations: 2.011 MB / 1.63 GB, free: 166 MB / 1.029 GB
Notification: Performance of preOpt evaluateParameters (simulation): time 0.01831/5.066, allocations: 6.623 MB / 1.637 GB, free: 161.1 MB / 1.029 GB
Notification: Performance of preOpt simplifyIfEquations (simulation): time 0.001059/5.067, allocations: 0.737 MB / 1.637 GB, free: 160.6 MB / 1.029 GB
Notification: Performance of preOpt expandDerOperator (simulation): time 0.00591/5.073, allocations: 0.8343 MB / 1.638 GB, free: 160.1 MB / 1.029 GB
Notification: Performance of preOpt clockPartitioning (simulation): time 0.04907/5.122, allocations: 15.35 MB / 1.653 GB, free: 149.3 MB / 1.029 GB
Notification: Performance of preOpt findStateOrder (simulation): time 0.0003674/5.123, allocations: 4.484 kB / 1.653 GB, free: 149.3 MB / 1.029 GB
Notification: Performance of preOpt replaceEdgeChange (simulation): time 0.004641/5.127, allocations: 342.3 kB / 1.654 GB, free: 149.2 MB / 1.029 GB
Notification: Performance of preOpt inlineArrayEqn (simulation): time 0.0002502/5.128, allocations: 276.8 kB / 1.654 GB, free: 149 MB / 1.029 GB
Notification: Performance of preOpt removeEqualRHS (simulation): time 0.04478/5.173, allocations: 17.45 MB / 1.671 GB, free: 136.9 MB / 1.029 GB
Warning: The model contains alias variables with redundant start and/or conflicting nominal values. It is recommended to resolve the conflicts, because otherwise the system could be hard to solve. To print the conflicting alias sets and the chosen candidates please use -d=aliasConflicts.
Notification: Performance of preOpt removeSimpleEquations (simulation): time 0.1155/5.288, allocations: 58.43 MB / 1.728 GB, free: 86.97 MB / 1.029 GB
Notification: Performance of preOpt comSubExp (simulation): time 0.02771/5.316, allocations: 11.92 MB / 1.74 GB, free: 75.05 MB / 1.029 GB
Notification: Performance of preOpt resolveLoops (simulation): time 0.01671/5.333, allocations: 8.267 MB / 1.748 GB, free: 66.77 MB / 1.029 GB
Notification: Performance of preOpt evalFunc (simulation): time 0.02224/5.355, allocations: 43.46 MB / 1.79 GB, free: 13.82 MB / 1.029 GB
Notification: Performance of preOpt encapsulateWhenConditions (simulation): time 0.0002686/5.355, allocations: 137.7 kB / 1.79 GB, free: 13.68 MB / 1.029 GB
Notification: Performance of pre-optimization done (n=1023): time 3.422e-05/5.355, allocations: 0 / 1.79 GB, free: 13.68 MB / 1.029 GB
Notification: Performance of matching and sorting (n=1031): time 0.1461/5.501, allocations: 46.45 MB / 1.836 GB, free: 14.58 MB / 1.076 GB
Notification: Performance of inlineWhenForInitialization (initialization): time 0.0001692/5.502, allocations: 219.2 kB / 1.836 GB, free: 14.33 MB / 1.076 GB
Notification: Performance of selectInitializationVariablesDAE (initialization): time 0.01533/5.517, allocations: 6.345 MB / 1.842 GB, free: 8.027 MB / 1.076 GB
Notification: Performance of collectPreVariables (initialization): time 0.003557/5.521, allocations: 181.7 kB / 1.842 GB, free: 7.844 MB / 1.076 GB
Notification: Performance of collectInitialEqns (initialization): time 0.004803/5.525, allocations: 3.978 MB / 1.846 GB, free: 3.859 MB / 1.076 GB
Notification: Performance of collectInitialBindings (initialization): time 0.006646/5.532, allocations: 3.43 MB / 1.849 GB, free: 480 kB / 1.076 GB
Notification: Performance of simplifyInitialFunctions (initialization): time 0.4214/5.953, allocations: 2.13 MB / 1.851 GB, free: 0.534 GB / 1.076 GB
Notification: Performance of setup shared object (initialization): time 0.0001/5.954, allocations: 302.7 kB / 1.852 GB, free: 0.5337 GB / 1.076 GB
Notification: Performance of preBalanceInitialSystem (initialization): time 0.02169/5.975, allocations: 7.519 MB / 1.859 GB, free: 0.5336 GB / 1.076 GB
Notification: Performance of partitionIndependentBlocks (initialization): time 0.02228/5.998, allocations: 9.121 MB / 1.868 GB, free: 0.5322 GB / 1.076 GB
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[10].deltaE_system = $START.evaporator.thermalElementA[10].deltaE_system (0.0 = $START.evaporator.thermalElementA[10].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[9].deltaE_system = $START.evaporator.thermalElementA[9].deltaE_system (0.0 = $START.evaporator.thermalElementA[9].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[8].deltaE_system = $START.evaporator.thermalElementA[8].deltaE_system (0.0 = $START.evaporator.thermalElementA[8].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[7].deltaE_system = $START.evaporator.thermalElementA[7].deltaE_system (0.0 = $START.evaporator.thermalElementA[7].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[6].deltaE_system = $START.evaporator.thermalElementA[6].deltaE_system (0.0 = $START.evaporator.thermalElementA[6].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[5].deltaE_system = $START.evaporator.thermalElementA[5].deltaE_system (0.0 = $START.evaporator.thermalElementA[5].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[4].deltaE_system = $START.evaporator.thermalElementA[4].deltaE_system (0.0 = $START.evaporator.thermalElementA[4].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[3].deltaE_system = $START.evaporator.thermalElementA[3].deltaE_system (0.0 = $START.evaporator.thermalElementA[3].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[2].deltaE_system = $START.evaporator.thermalElementA[2].deltaE_system (0.0 = $START.evaporator.thermalElementA[2].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[1].deltaE_system = $START.evaporator.thermalElementA[1].deltaE_system (0.0 = $START.evaporator.thermalElementA[1].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[10].deltaE_system = $START.evaporator.thermalElementB[10].deltaE_system (0.0 = $START.evaporator.thermalElementB[10].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[9].deltaE_system = $START.evaporator.thermalElementB[9].deltaE_system (0.0 = $START.evaporator.thermalElementB[9].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[8].deltaE_system = $START.evaporator.thermalElementB[8].deltaE_system (0.0 = $START.evaporator.thermalElementB[8].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[7].deltaE_system = $START.evaporator.thermalElementB[7].deltaE_system (0.0 = $START.evaporator.thermalElementB[7].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[6].deltaE_system = $START.evaporator.thermalElementB[6].deltaE_system (0.0 = $START.evaporator.thermalElementB[6].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[5].deltaE_system = $START.evaporator.thermalElementB[5].deltaE_system (0.0 = $START.evaporator.thermalElementB[5].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[4].deltaE_system = $START.evaporator.thermalElementB[4].deltaE_system (0.0 = $START.evaporator.thermalElementB[4].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[3].deltaE_system = $START.evaporator.thermalElementB[3].deltaE_system (0.0 = $START.evaporator.thermalElementB[3].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[2].deltaE_system = $START.evaporator.thermalElementB[2].deltaE_system (0.0 = $START.evaporator.thermalElementB[2].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[1].deltaE_system = $START.evaporator.thermalElementB[1].deltaE_system (0.0 = $START.evaporator.thermalElementB[1].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[10].deltaE_system = $START.condenser.thermalElementA[10].deltaE_system (0.0 = $START.condenser.thermalElementA[10].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[9].deltaE_system = $START.condenser.thermalElementA[9].deltaE_system (0.0 = $START.condenser.thermalElementA[9].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[8].deltaE_system = $START.condenser.thermalElementA[8].deltaE_system (0.0 = $START.condenser.thermalElementA[8].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[7].deltaE_system = $START.condenser.thermalElementA[7].deltaE_system (0.0 = $START.condenser.thermalElementA[7].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[6].deltaE_system = $START.condenser.thermalElementA[6].deltaE_system (0.0 = $START.condenser.thermalElementA[6].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[5].deltaE_system = $START.condenser.thermalElementA[5].deltaE_system (0.0 = $START.condenser.thermalElementA[5].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[4].deltaE_system = $START.condenser.thermalElementA[4].deltaE_system (0.0 = $START.condenser.thermalElementA[4].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[3].deltaE_system = $START.condenser.thermalElementA[3].deltaE_system (0.0 = $START.condenser.thermalElementA[3].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[2].deltaE_system = $START.condenser.thermalElementA[2].deltaE_system (0.0 = $START.condenser.thermalElementA[2].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[1].deltaE_system = $START.condenser.thermalElementA[1].deltaE_system (0.0 = $START.condenser.thermalElementA[1].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[10].deltaE_system = $START.condenser.thermalElementB[10].deltaE_system (0.0 = $START.condenser.thermalElementB[10].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[9].deltaE_system = $START.condenser.thermalElementB[9].deltaE_system (0.0 = $START.condenser.thermalElementB[9].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[8].deltaE_system = $START.condenser.thermalElementB[8].deltaE_system (0.0 = $START.condenser.thermalElementB[8].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[7].deltaE_system = $START.condenser.thermalElementB[7].deltaE_system (0.0 = $START.condenser.thermalElementB[7].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[6].deltaE_system = $START.condenser.thermalElementB[6].deltaE_system (0.0 = $START.condenser.thermalElementB[6].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[5].deltaE_system = $START.condenser.thermalElementB[5].deltaE_system (0.0 = $START.condenser.thermalElementB[5].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[4].deltaE_system = $START.condenser.thermalElementB[4].deltaE_system (0.0 = $START.condenser.thermalElementB[4].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[3].deltaE_system = $START.condenser.thermalElementB[3].deltaE_system (0.0 = $START.condenser.thermalElementB[3].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[2].deltaE_system = $START.condenser.thermalElementB[2].deltaE_system (0.0 = $START.condenser.thermalElementB[2].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[1].deltaE_system = $START.condenser.thermalElementB[1].deltaE_system (0.0 = $START.condenser.thermalElementB[1].deltaE_system)
Notification: Performance of analyzeInitialSystem (initialization): time 0.04344/6.041, allocations: 20.6 MB / 1.888 GB, free: 0.524 GB / 1.076 GB
Notification: Performance of solveInitialSystemEqSystem (initialization): time 0.000205/6.041, allocations: 11.84 kB / 1.888 GB, free: 0.524 GB / 1.076 GB
Notification: Performance of matching and sorting (n=1279) (initialization): time 0.07443/6.116, allocations: 19.83 MB / 1.907 GB, free: 0.5176 GB / 1.076 GB
Notification: Performance of prepare postOptimizeDAE: time 0.0001437/6.116, allocations: 21.34 kB / 1.908 GB, free: 0.5176 GB / 1.076 GB
Notification: Performance of postOpt simplifyComplexFunction (initialization): time 0.000204/6.116, allocations: 41.03 kB / 1.908 GB, free: 0.5176 GB / 1.076 GB
Notification: Performance of postOpt tearingSystem (initialization): time 0.01446/6.131, allocations: 2.16 MB / 1.91 GB, free: 0.5169 GB / 1.076 GB
Notification: Performance of postOpt solveSimpleEquations (initialization): time 0.01308/6.144, allocations: 2.584 MB / 1.912 GB, free: 0.5167 GB / 1.076 GB
Notification: Performance of postOpt calculateStrongComponentJacobians (initialization): time 0.03235/6.176, allocations: 42.4 MB / 1.954 GB, free: 492.2 MB / 1.076 GB
Notification: Performance of postOpt simplifyAllExpressions (initialization): time 0.01319/6.189, allocations: 1.008 MB / 1.955 GB, free: 491.8 MB / 1.076 GB
Notification: Performance of postOpt collapseArrayExpressions (initialization): time 0.004913/6.194, allocations: 0.7612 MB / 1.955 GB, free: 491.6 MB / 1.076 GB
Warning: The initial conditions are over specified. The following 40 initial equations are redundant, so they are removed from the initialization system:
         evaporator.thermalElementA[10].deltaE_system = $START.evaporator.thermalElementA[10].deltaE_system
         evaporator.thermalElementA[9].deltaE_system = $START.evaporator.thermalElementA[9].deltaE_system
         evaporator.thermalElementA[8].deltaE_system = $START.evaporator.thermalElementA[8].deltaE_system
         evaporator.thermalElementA[7].deltaE_system = $START.evaporator.thermalElementA[7].deltaE_system
         evaporator.thermalElementA[6].deltaE_system = $START.evaporator.thermalElementA[6].deltaE_system
         evaporator.thermalElementA[5].deltaE_system = $START.evaporator.thermalElementA[5].deltaE_system
         evaporator.thermalElementA[4].deltaE_system = $START.evaporator.thermalElementA[4].deltaE_system
         evaporator.thermalElementA[3].deltaE_system = $START.evaporator.thermalElementA[3].deltaE_system
         evaporator.thermalElementA[2].deltaE_system = $START.evaporator.thermalElementA[2].deltaE_system
         evaporator.thermalElementA[1].deltaE_system = $START.evaporator.thermalElementA[1].deltaE_system
         evaporator.thermalElementB[10].deltaE_system = $START.evaporator.thermalElementB[10].deltaE_system
         evaporator.thermalElementB[9].deltaE_system = $START.evaporator.thermalElementB[9].deltaE_system
         evaporator.thermalElementB[8].deltaE_system = $START.evaporator.thermalElementB[8].deltaE_system
         evaporator.thermalElementB[7].deltaE_system = $START.evaporator.thermalElementB[7].deltaE_system
         evaporator.thermalElementB[6].deltaE_system = $START.evaporator.thermalElementB[6].deltaE_system
         evaporator.thermalElementB[5].deltaE_system = $START.evaporator.thermalElementB[5].deltaE_system
         evaporator.thermalElementB[4].deltaE_system = $START.evaporator.thermalElementB[4].deltaE_system
         evaporator.thermalElementB[3].deltaE_system = $START.evaporator.thermalElementB[3].deltaE_system
         evaporator.thermalElementB[2].deltaE_system = $START.evaporator.thermalElementB[2].deltaE_system
         evaporator.thermalElementB[1].deltaE_system = $START.evaporator.thermalElementB[1].deltaE_system
         condenser.thermalElementA[10].deltaE_system = $START.condenser.thermalElementA[10].deltaE_system
         condenser.thermalElementA[9].deltaE_system = $START.condenser.thermalElementA[9].deltaE_system
         condenser.thermalElementA[8].deltaE_system = $START.condenser.thermalElementA[8].deltaE_system
         condenser.thermalElementA[7].deltaE_system = $START.condenser.thermalElementA[7].deltaE_system
         condenser.thermalElementA[6].deltaE_system = $START.condenser.thermalElementA[6].deltaE_system
         condenser.thermalElementA[5].deltaE_system = $START.condenser.thermalElementA[5].deltaE_system
         condenser.thermalElementA[4].deltaE_system = $START.condenser.thermalElementA[4].deltaE_system
         condenser.thermalElementA[3].deltaE_system = $START.condenser.thermalElementA[3].deltaE_system
         condenser.thermalElementA[2].deltaE_system = $START.condenser.thermalElementA[2].deltaE_system
         condenser.thermalElementA[1].deltaE_system = $START.condenser.thermalElementA[1].deltaE_system
         condenser.thermalElementB[10].deltaE_system = $START.condenser.thermalElementB[10].deltaE_system
         condenser.thermalElementB[9].deltaE_system = $START.condenser.thermalElementB[9].deltaE_system
         condenser.thermalElementB[8].deltaE_system = $START.condenser.thermalElementB[8].deltaE_system
         condenser.thermalElementB[7].deltaE_system = $START.condenser.thermalElementB[7].deltaE_system
         condenser.thermalElementB[6].deltaE_system = $START.condenser.thermalElementB[6].deltaE_system
         condenser.thermalElementB[5].deltaE_system = $START.condenser.thermalElementB[5].deltaE_system
         condenser.thermalElementB[4].deltaE_system = $START.condenser.thermalElementB[4].deltaE_system
         condenser.thermalElementB[3].deltaE_system = $START.condenser.thermalElementB[3].deltaE_system
         condenser.thermalElementB[2].deltaE_system = $START.condenser.thermalElementB[2].deltaE_system
         condenser.thermalElementB[1].deltaE_system = $START.condenser.thermalElementB[1].deltaE_system.
Notification: Performance of preBalanceInitialSystem (initialization_lambda0): time 0.02845/6.223, allocations: 10.35 MB / 1.965 GB, free: 485.9 MB / 1.076 GB
Notification: Performance of partitionIndependentBlocks (initialization_lambda0): time 0.02127/6.244, allocations: 9.083 MB / 1.974 GB, free: 479.5 MB / 1.076 GB
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[10].deltaE_system = $START.evaporator.thermalElementA[10].deltaE_system (0.0 = $START.evaporator.thermalElementA[10].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[9].deltaE_system = $START.evaporator.thermalElementA[9].deltaE_system (0.0 = $START.evaporator.thermalElementA[9].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[8].deltaE_system = $START.evaporator.thermalElementA[8].deltaE_system (0.0 = $START.evaporator.thermalElementA[8].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[7].deltaE_system = $START.evaporator.thermalElementA[7].deltaE_system (0.0 = $START.evaporator.thermalElementA[7].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[6].deltaE_system = $START.evaporator.thermalElementA[6].deltaE_system (0.0 = $START.evaporator.thermalElementA[6].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[5].deltaE_system = $START.evaporator.thermalElementA[5].deltaE_system (0.0 = $START.evaporator.thermalElementA[5].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[4].deltaE_system = $START.evaporator.thermalElementA[4].deltaE_system (0.0 = $START.evaporator.thermalElementA[4].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[3].deltaE_system = $START.evaporator.thermalElementA[3].deltaE_system (0.0 = $START.evaporator.thermalElementA[3].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[2].deltaE_system = $START.evaporator.thermalElementA[2].deltaE_system (0.0 = $START.evaporator.thermalElementA[2].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[1].deltaE_system = $START.evaporator.thermalElementA[1].deltaE_system (0.0 = $START.evaporator.thermalElementA[1].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[10].deltaE_system = $START.evaporator.thermalElementB[10].deltaE_system (0.0 = $START.evaporator.thermalElementB[10].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[9].deltaE_system = $START.evaporator.thermalElementB[9].deltaE_system (0.0 = $START.evaporator.thermalElementB[9].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[8].deltaE_system = $START.evaporator.thermalElementB[8].deltaE_system (0.0 = $START.evaporator.thermalElementB[8].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[7].deltaE_system = $START.evaporator.thermalElementB[7].deltaE_system (0.0 = $START.evaporator.thermalElementB[7].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[6].deltaE_system = $START.evaporator.thermalElementB[6].deltaE_system (0.0 = $START.evaporator.thermalElementB[6].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[5].deltaE_system = $START.evaporator.thermalElementB[5].deltaE_system (0.0 = $START.evaporator.thermalElementB[5].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[4].deltaE_system = $START.evaporator.thermalElementB[4].deltaE_system (0.0 = $START.evaporator.thermalElementB[4].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[3].deltaE_system = $START.evaporator.thermalElementB[3].deltaE_system (0.0 = $START.evaporator.thermalElementB[3].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[2].deltaE_system = $START.evaporator.thermalElementB[2].deltaE_system (0.0 = $START.evaporator.thermalElementB[2].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[1].deltaE_system = $START.evaporator.thermalElementB[1].deltaE_system (0.0 = $START.evaporator.thermalElementB[1].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[10].deltaE_system = $START.condenser.thermalElementA[10].deltaE_system (0.0 = $START.condenser.thermalElementA[10].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[9].deltaE_system = $START.condenser.thermalElementA[9].deltaE_system (0.0 = $START.condenser.thermalElementA[9].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[8].deltaE_system = $START.condenser.thermalElementA[8].deltaE_system (0.0 = $START.condenser.thermalElementA[8].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[7].deltaE_system = $START.condenser.thermalElementA[7].deltaE_system (0.0 = $START.condenser.thermalElementA[7].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[6].deltaE_system = $START.condenser.thermalElementA[6].deltaE_system (0.0 = $START.condenser.thermalElementA[6].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[5].deltaE_system = $START.condenser.thermalElementA[5].deltaE_system (0.0 = $START.condenser.thermalElementA[5].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[4].deltaE_system = $START.condenser.thermalElementA[4].deltaE_system (0.0 = $START.condenser.thermalElementA[4].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[3].deltaE_system = $START.condenser.thermalElementA[3].deltaE_system (0.0 = $START.condenser.thermalElementA[3].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[2].deltaE_system = $START.condenser.thermalElementA[2].deltaE_system (0.0 = $START.condenser.thermalElementA[2].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[1].deltaE_system = $START.condenser.thermalElementA[1].deltaE_system (0.0 = $START.condenser.thermalElementA[1].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[10].deltaE_system = $START.condenser.thermalElementB[10].deltaE_system (0.0 = $START.condenser.thermalElementB[10].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[9].deltaE_system = $START.condenser.thermalElementB[9].deltaE_system (0.0 = $START.condenser.thermalElementB[9].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[8].deltaE_system = $START.condenser.thermalElementB[8].deltaE_system (0.0 = $START.condenser.thermalElementB[8].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[7].deltaE_system = $START.condenser.thermalElementB[7].deltaE_system (0.0 = $START.condenser.thermalElementB[7].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[6].deltaE_system = $START.condenser.thermalElementB[6].deltaE_system (0.0 = $START.condenser.thermalElementB[6].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[5].deltaE_system = $START.condenser.thermalElementB[5].deltaE_system (0.0 = $START.condenser.thermalElementB[5].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[4].deltaE_system = $START.condenser.thermalElementB[4].deltaE_system (0.0 = $START.condenser.thermalElementB[4].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[3].deltaE_system = $START.condenser.thermalElementB[3].deltaE_system (0.0 = $START.condenser.thermalElementB[3].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[2].deltaE_system = $START.condenser.thermalElementB[2].deltaE_system (0.0 = $START.condenser.thermalElementB[2].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[1].deltaE_system = $START.condenser.thermalElementB[1].deltaE_system (0.0 = $START.condenser.thermalElementB[1].deltaE_system)
Notification: Performance of analyzeInitialSystem (initialization_lambda0): time 0.03948/6.284, allocations: 20.53 MB / 1.994 GB, free: 457.8 MB / 1.076 GB
Notification: Performance of solveInitialSystemEqSystem (initialization_lambda0): time 8.456e-05/6.284, allocations: 12 kB / 1.994 GB, free: 457.8 MB / 1.076 GB
Notification: Performance of matching and sorting (n=1279) (initialization_lambda0): time 0.0578/6.342, allocations: 19.76 MB / 2.014 GB, free: 438.5 MB / 1.076 GB
Notification: Performance of prepare postOptimizeDAE: time 8.81e-05/6.342, allocations: 20 kB / 2.014 GB, free: 438.5 MB / 1.076 GB
Notification: Performance of postOpt simplifyComplexFunction (initialization): time 0.0001341/6.342, allocations: 40.06 kB / 2.014 GB, free: 438.5 MB / 1.076 GB
Notification: Performance of postOpt tearingSystem (initialization): time 0.0138/6.356, allocations: 2.167 MB / 2.016 GB, free: 436.2 MB / 1.076 GB
Notification: Performance of postOpt solveSimpleEquations (initialization): time 0.01297/6.369, allocations: 2.563 MB / 2.018 GB, free: 433.7 MB / 1.076 GB
Notification: Performance of postOpt calculateStrongComponentJacobians (initialization): time 0.03391/6.403, allocations: 42.41 MB / 2.06 GB, free: 388.5 MB / 1.076 GB
Notification: Performance of postOpt simplifyAllExpressions (initialization): time 0.01658/6.419, allocations: 1.007 MB / 2.061 GB, free: 387.6 MB / 1.076 GB
Notification: Performance of postOpt collapseArrayExpressions (initialization): time 0.006283/6.426, allocations: 0.7575 MB / 2.061 GB, free: 386.8 MB / 1.076 GB
Warning: The initial conditions are over specified. The following 40 initial equations are redundant, so they are removed from the initialization_lambda0 system:
         evaporator.thermalElementA[10].deltaE_system = $START.evaporator.thermalElementA[10].deltaE_system
         evaporator.thermalElementA[9].deltaE_system = $START.evaporator.thermalElementA[9].deltaE_system
         evaporator.thermalElementA[8].deltaE_system = $START.evaporator.thermalElementA[8].deltaE_system
         evaporator.thermalElementA[7].deltaE_system = $START.evaporator.thermalElementA[7].deltaE_system
         evaporator.thermalElementA[6].deltaE_system = $START.evaporator.thermalElementA[6].deltaE_system
         evaporator.thermalElementA[5].deltaE_system = $START.evaporator.thermalElementA[5].deltaE_system
         evaporator.thermalElementA[4].deltaE_system = $START.evaporator.thermalElementA[4].deltaE_system
         evaporator.thermalElementA[3].deltaE_system = $START.evaporator.thermalElementA[3].deltaE_system
         evaporator.thermalElementA[2].deltaE_system = $START.evaporator.thermalElementA[2].deltaE_system
         evaporator.thermalElementA[1].deltaE_system = $START.evaporator.thermalElementA[1].deltaE_system
         evaporator.thermalElementB[10].deltaE_system = $START.evaporator.thermalElementB[10].deltaE_system
         evaporator.thermalElementB[9].deltaE_system = $START.evaporator.thermalElementB[9].deltaE_system
         evaporator.thermalElementB[8].deltaE_system = $START.evaporator.thermalElementB[8].deltaE_system
         evaporator.thermalElementB[7].deltaE_system = $START.evaporator.thermalElementB[7].deltaE_system
         evaporator.thermalElementB[6].deltaE_system = $START.evaporator.thermalElementB[6].deltaE_system
         evaporator.thermalElementB[5].deltaE_system = $START.evaporator.thermalElementB[5].deltaE_system
         evaporator.thermalElementB[4].deltaE_system = $START.evaporator.thermalElementB[4].deltaE_system
         evaporator.thermalElementB[3].deltaE_system = $START.evaporator.thermalElementB[3].deltaE_system
         evaporator.thermalElementB[2].deltaE_system = $START.evaporator.thermalElementB[2].deltaE_system
         evaporator.thermalElementB[1].deltaE_system = $START.evaporator.thermalElementB[1].deltaE_system
         condenser.thermalElementA[10].deltaE_system = $START.condenser.thermalElementA[10].deltaE_system
         condenser.thermalElementA[9].deltaE_system = $START.condenser.thermalElementA[9].deltaE_system
         condenser.thermalElementA[8].deltaE_system = $START.condenser.thermalElementA[8].deltaE_system
         condenser.thermalElementA[7].deltaE_system = $START.condenser.thermalElementA[7].deltaE_system
         condenser.thermalElementA[6].deltaE_system = $START.condenser.thermalElementA[6].deltaE_system
         condenser.thermalElementA[5].deltaE_system = $START.condenser.thermalElementA[5].deltaE_system
         condenser.thermalElementA[4].deltaE_system = $START.condenser.thermalElementA[4].deltaE_system
         condenser.thermalElementA[3].deltaE_system = $START.condenser.thermalElementA[3].deltaE_system
         condenser.thermalElementA[2].deltaE_system = $START.condenser.thermalElementA[2].deltaE_system
         condenser.thermalElementA[1].deltaE_system = $START.condenser.thermalElementA[1].deltaE_system
         condenser.thermalElementB[10].deltaE_system = $START.condenser.thermalElementB[10].deltaE_system
         condenser.thermalElementB[9].deltaE_system = $START.condenser.thermalElementB[9].deltaE_system
         condenser.thermalElementB[8].deltaE_system = $START.condenser.thermalElementB[8].deltaE_system
         condenser.thermalElementB[7].deltaE_system = $START.condenser.thermalElementB[7].deltaE_system
         condenser.thermalElementB[6].deltaE_system = $START.condenser.thermalElementB[6].deltaE_system
         condenser.thermalElementB[5].deltaE_system = $START.condenser.thermalElementB[5].deltaE_system
         condenser.thermalElementB[4].deltaE_system = $START.condenser.thermalElementB[4].deltaE_system
         condenser.thermalElementB[3].deltaE_system = $START.condenser.thermalElementB[3].deltaE_system
         condenser.thermalElementB[2].deltaE_system = $START.condenser.thermalElementB[2].deltaE_system
         condenser.thermalElementB[1].deltaE_system = $START.condenser.thermalElementB[1].deltaE_system.
Notification: Model statistics after passing the back-end for initialization:
 * Number of independent subsystems: 170
 * Number of states: 0 ()
 * Number of discrete variables: 49 (accumulator.medium.phase,receiver.medium.phase,accumulator.outlet.state.phase,accumulator.inlet.state.phase,singleFlowSensor.outlet.state.phase,receiver.outlet.state.phase,receiver.inlet.state.phase,controlValve.outlet.state.phase,evaporator.thermalElementB[10].state.phase,evaporator.thermalElementB[9].state.phase,evaporator.thermalElementB[9].outlet.state.phase,evaporator.thermalElementB[8].state.phase,evaporator.thermalElementB[8].outlet.state.phase,evaporator.thermalElementB[7].state.phase,evaporator.thermalElementB[7].outlet.state.phase,evaporator.thermalElementB[6].state.phase,evaporator.thermalElementB[6].outlet.state.phase,evaporator.thermalElementB[5].state.phase,evaporator.thermalElementB[5].outlet.state.phase,evaporator.thermalElementB[4].state.phase,evaporator.thermalElementB[4].outlet.state.phase,evaporator.thermalElementB[3].state.phase,evaporator.thermalElementB[3].outlet.state.phase,evaporator.thermalElementB[2].state.phase,evaporator.thermalElementB[2].outlet.state.phase,evaporator.thermalElementB[1].state.phase,evaporator.thermalElementB[1].outlet.state.phase,condenser.thermalElementB[10].state.phase,condenser.thermalElementB[9].state.phase,condenser.thermalElementB[9].outlet.state.phase,condenser.thermalElementB[8].state.phase,condenser.thermalElementB[8].outlet.state.phase,condenser.thermalElementB[7].state.phase,condenser.thermalElementB[7].outlet.state.phase,condenser.thermalElementB[6].state.phase,condenser.thermalElementB[6].outlet.state.phase,condenser.thermalElementB[5].state.phase,condenser.thermalElementB[5].outlet.state.phase,condenser.thermalElementB[4].state.phase,condenser.thermalElementB[4].outlet.state.phase,condenser.thermalElementB[3].state.phase,condenser.thermalElementB[3].outlet.state.phase,condenser.thermalElementB[2].state.phase,condenser.thermalElementB[2].outlet.state.phase,condenser.thermalElementB[1].state.phase,condenser.thermalElementB[1].outlet.state.phase,PI2.I.local_reset,PI1.I.local_reset,PI.I.local_reset)
 * Number of discrete states: 0 ()
 * Number of clocked states: 0 ()
 * Top-level inputs: 0
Notification: Strong component statistics for initialization (988):
 * Single equations (assignments): 915
 * Array equations: 0
 * Algorithm blocks: 0
 * Record equations: 47
 * When equations: 0
 * If-equations: 0
 * Equation systems (not torn): 0
 * Torn equation systems: 26
 * Mixed (continuous/discrete) equation systems: 0
Notification: Torn system details for strict tearing set:
 * Linear torn systems (#iteration vars, #inner vars, density): 24 systems
   {(1,13,100.0%), (1,12,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,12,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,13,100.0%)}
 * Non-linear torn systems (#iteration vars, #inner vars): 2 systems
   {(1,1), (1,1)}
Notification: Performance of prepare postOptimizeDAE: time 0.01027/6.436, allocations: 1.012 MB / 2.062 GB, free: 385.8 MB / 1.076 GB
Notification: Performance of postOpt lateInlineFunction (simulation): time 0.006864/6.443, allocations: 0.8817 MB / 2.063 GB, free: 385.2 MB / 1.076 GB
Notification: Performance of postOpt wrapFunctionCalls (simulation): time 0.08123/6.524, allocations: 33.54 MB / 2.096 GB, free: 351.8 MB / 1.076 GB
Notification: Performance of postOpt inlineArrayEqn (simulation): time 0.04964/6.574, allocations: 20.25 MB / 2.116 GB, free: 331.5 MB / 1.076 GB
Notification: Performance of postOpt constantLinearSystem (simulation): time 0.0001358/6.574, allocations: 23.94 kB / 2.116 GB, free: 331.5 MB / 1.076 GB
Notification: Performance of postOpt simplifysemiLinear (simulation): time 0.0003854/6.574, allocations: 55.8 kB / 2.116 GB, free: 331.4 MB / 1.076 GB
Warning: The model contains alias variables with redundant start and/or conflicting nominal values. It is recommended to resolve the conflicts, because otherwise the system could be hard to solve. To print the conflicting alias sets and the chosen candidates please use -d=aliasConflicts.
Notification: Performance of postOpt removeSimpleEquations (simulation): time 0.095/6.669, allocations: 43.93 MB / 2.159 GB, free: 286.2 MB / 1.076 GB
Notification: Performance of postOpt simplifyComplexFunction (simulation): time 0.0002126/6.67, allocations: 4 kB / 2.159 GB, free: 286.2 MB / 1.076 GB
Notification: Performance of postOpt solveSimpleEquations (simulation): time 0.01137/6.681, allocations: 2.302 MB / 2.161 GB, free: 283.9 MB / 1.076 GB
Notification: Performance of postOpt tearingSystem (simulation): time 0.006568/6.688, allocations: 2.161 MB / 2.163 GB, free: 281.7 MB / 1.076 GB
Notification: Performance of postOpt inputDerivativesUsed (simulation): time 0.003693/6.691, allocations: 403.7 kB / 2.164 GB, free: 281.3 MB / 1.076 GB
Notification: Performance of postOpt calculateStrongComponentJacobians (simulation): time 0.02849/6.72, allocations: 43.6 MB / 2.206 GB, free: 234.4 MB / 1.076 GB
Notification: Performance of postOpt calculateStateSetsJacobians (simulation): time 2.705e-06/6.72, allocations: 0 / 2.206 GB, free: 234.4 MB / 1.076 GB
Notification: Performance of postOpt symbolicJacobian (simulation): time 0.07282/6.793, allocations: 31.12 MB / 2.237 GB, free: 203.1 MB / 1.076 GB
Notification: Performance of postOpt removeConstants (simulation): time 0.01018/6.803, allocations: 2.638 MB / 2.239 GB, free: 200.5 MB / 1.076 GB
Notification: Performance of postOpt simplifyTimeIndepFuncCalls (simulation): time 0.005632/6.809, allocations: 212 kB / 2.239 GB, free: 200.3 MB / 1.076 GB
Notification: Performance of postOpt simplifyAllExpressions (simulation): time 0.01268/6.821, allocations: 1.276 MB / 2.241 GB, free: 199 MB / 1.076 GB
Notification: Performance of postOpt findZeroCrossings (simulation): time 0.004413/6.826, allocations: 0.7766 MB / 2.241 GB, free: 198.2 MB / 1.076 GB
Notification: Performance of postOpt collapseArrayExpressions (simulation): time 0.003965/6.83, allocations: 0.5388 MB / 2.242 GB, free: 197.7 MB / 1.076 GB
Notification: Performance of sorting global known variables: time 0.01037/6.84, allocations: 4.318 MB / 2.246 GB, free: 193.4 MB / 1.076 GB
Notification: Performance of sort global known variables: time 1.022e-06/6.84, allocations: 0 / 2.246 GB, free: 193.4 MB / 1.076 GB
Notification: Performance of remove unused functions: time 0.08093/6.921, allocations: 8.913 MB / 2.255 GB, free: 185.2 MB / 1.076 GB
Notification: Model statistics after passing the back-end for simulation:
 * Number of independent subsystems: 3
 * Number of states: 56 (condenser.thermalElementB[1].h,condenser.thermalElementB[2].h,condenser.thermalElementB[3].h,condenser.thermalElementB[4].h,condenser.thermalElementB[5].h,condenser.thermalElementB[6].h,condenser.thermalElementB[7].h,condenser.thermalElementB[8].h,condenser.thermalElementB[9].h,condenser.thermalElementB[10].h,condenser.thermalElementA[1].h,condenser.thermalElementA[2].h,condenser.thermalElementA[3].h,condenser.thermalElementA[4].h,condenser.thermalElementA[5].h,condenser.thermalElementA[6].h,condenser.thermalElementA[7].h,condenser.thermalElementA[8].h,condenser.thermalElementA[9].h,condenser.thermalElementA[10].h,evaporator.thermalElementB[1].h,evaporator.thermalElementB[2].h,evaporator.thermalElementB[3].h,evaporator.thermalElementB[4].h,evaporator.thermalElementB[5].h,evaporator.thermalElementB[6].h,evaporator.thermalElementB[7].h,evaporator.thermalElementB[8].h,evaporator.thermalElementB[9].h,evaporator.thermalElementB[10].h,evaporator.thermalElementA[1].h,evaporator.thermalElementA[2].h,evaporator.thermalElementA[3].h,evaporator.thermalElementA[4].h,evaporator.thermalElementA[5].h,evaporator.thermalElementA[6].h,evaporator.thermalElementA[7].h,evaporator.thermalElementA[8].h,evaporator.thermalElementA[9].h,evaporator.thermalElementA[10].h,compressor.m_flow,compressor.phi,compressor.omega,receiver.M,receiver.U_med,fan.m_flow,fan1.m_flow,accumulator.M,accumulator.U_med,accumulator.m_flow_in,heatCapacitor.T,sensorVaporQuality8.value,PI.I.y,PI1.I.y,PI2.I.y,firstOrder2.y)
 * Number of discrete variables: 117 (condenser.thermalElementB[1].outlet.state.phase,condenser.thermalElementB[2].outlet.state.phase,condenser.thermalElementB[3].outlet.state.phase,condenser.thermalElementB[4].outlet.state.phase,condenser.thermalElementB[5].outlet.state.phase,condenser.thermalElementB[6].outlet.state.phase,condenser.thermalElementB[7].outlet.state.phase,condenser.thermalElementB[8].outlet.state.phase,condenser.thermalElementB[9].outlet.state.phase,receiver.inlet.state.phase,evaporator.thermalElementB[1].outlet.state.phase,evaporator.thermalElementB[2].outlet.state.phase,evaporator.thermalElementB[3].outlet.state.phase,evaporator.thermalElementB[4].outlet.state.phase,evaporator.thermalElementB[5].outlet.state.phase,evaporator.thermalElementB[6].outlet.state.phase,evaporator.thermalElementB[7].outlet.state.phase,evaporator.thermalElementB[8].outlet.state.phase,evaporator.thermalElementB[9].outlet.state.phase,accumulator.inlet.state.phase,singleFlowSensor.outlet.state.phase,receiver.outlet.state.phase,accumulator.outlet.state.phase,$cse1.phase,$cse2,$cse3.phase,$cse4,$cse5.phase,$cse6,$cse7.phase,$cse8,$cse9.phase,$cse11.phase,$cse12,$cse15.phase,$cse18.phase,$cse19,$cse21.phase,$cse22,$cse24.phase,$cse25,$cse27.phase,$cse28,$cse30.phase,$cse31,$cse33.phase,$cse34,$cse37.phase,$cse38.phase,$cse39,$cse41.phase,$cse42,$cse45.phase,$cse46,$cse49.phase,$cse50,$cse53.phase,$cse54,$cse57.phase,$cse58,$cse61.phase,$cse62,$cse65.phase,$cse66,$cse69.phase,$cse70,$cse73.phase,$cse74,$cse77.phase,$cse78,$cse81.phase,$cse82,$cse85.phase,$cse86,$cse89.phase,$cse90,$cse93.phase,$cse94,$cse97.phase,$cse98,$cse101.phase,$cse102,$cse105.phase,$cse106,$cse109.phase,$cse110,$cse113.phase,$cse114,$cse117.phase,$cse118,$cse122.phase,$cse123,$cse124.phase,$cse125,$cse126.phase,$cse127,condenser.thermalElementB[1].state.phase,condenser.thermalElementB[2].state.phase,condenser.thermalElementB[3].state.phase,condenser.thermalElementB[4].state.phase,condenser.thermalElementB[5].state.phase,condenser.thermalElementB[6].state.phase,condenser.thermalElementB[7].state.phase,condenser.thermalElementB[8].state.phase,condenser.thermalElementB[9].state.phase,condenser.thermalElementB[10].state.phase,evaporator.thermalElementB[1].state.phase,evaporator.thermalElementB[2].state.phase,evaporator.thermalElementB[3].state.phase,evaporator.thermalElementB[4].state.phase,evaporator.thermalElementB[5].state.phase,evaporator.thermalElementB[6].state.phase,evaporator.thermalElementB[7].state.phase,evaporator.thermalElementB[8].state.phase,evaporator.thermalElementB[9].state.phase,evaporator.thermalElementB[10].state.phase,controlValve.outlet.state.phase)
 * Number of discrete states: 0 ()
 * Number of clocked states: 0 ()
 * Top-level inputs: 0
Notification: Strong component statistics for simulation (960):
 * Single equations (assignments): 850
 * Array equations: 0
 * Algorithm blocks: 0
 * Record equations: 82
 * When equations: 0
 * If-equations: 0
 * Equation systems (not torn): 0
 * Torn equation systems: 28
 * Mixed (continuous/discrete) equation systems: 0
Notification: Torn system details for strict tearing set:
 * Linear torn systems (#iteration vars, #inner vars, density): 24 systems
   {(1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,13,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,13,100.0%), (1,12,100.0%), (1,12,100.0%)}
 * Non-linear torn systems (#iteration vars, #inner vars): 4 systems
   {(1,1), (1,1), (1,3), (1,3)}
Notification: Performance of Backend phase and start with SimCode phase: time 0.3718/7.293, allocations: 50.74 MB / 2.304 GB, free: 135.7 MB / 1.076 GB
Notification: Performance of simCode: created initialization part: time 0.07562/7.369, allocations: 34.76 MB / 2.338 GB, free: 100.2 MB / 1.076 GB
Notification: Performance of simCode: created event and clocks part: time 1.975e-05/7.369, allocations: 6.562 kB / 2.338 GB, free: 100.2 MB / 1.076 GB
Notification: Performance of simCode: created simulation system equations: time 0.0273/7.396, allocations: 13.83 MB / 2.352 GB, free: 85.88 MB / 1.076 GB
Notification: Performance of simCode: created of all other equations (e.g. parameter, nominal, assert, etc): time 0.0294/7.426, allocations: 3.615 MB / 2.355 GB, free: 82.32 MB / 1.076 GB
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10228:11-10228:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality8.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10228:11-10228:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect5.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10228:11-10228:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect4.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10228:11-10228:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect3.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10228:11-10228:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect2.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10228:11-10228:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality1.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10228:11-10228:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getFlowUnit(singleFlowSensor.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10228:11-10228:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality6.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10228:11-10228:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality4.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10228:11-10228:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality3.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10228:11-10228:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality2.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10228:11-10228:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10228:11-10228:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getFlowUnit(compressor.outputQuantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10228:11-10228:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality8.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10228:11-10228:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect5.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10228:11-10228:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect4.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10228:11-10228:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect3.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10228:11-10228:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect2.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10228:11-10228:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality1.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10228:11-10228:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getFlowUnit(singleFlowSensor.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10228:11-10228:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality6.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10228:11-10228:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality4.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10228:11-10228:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality3.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10228:11-10228:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality2.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10228:11-10228:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10228:11-10228:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality8.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10228:11-10228:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect2.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10228:11-10228:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect5.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10228:11-10228:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect4.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10228:11-10228:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getUnit(singleSensorSelect3.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10228:11-10228:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality1.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10228:11-10228:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getFlowUnit(singleFlowSensor.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10228:11-10228:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality6.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10228:11-10228:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality4.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10228:11-10228:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality3.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10228:11-10228:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality2.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10228:11-10228:220:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality.quantity)
Notification: Performance of simCode: created linear, non-linear and system jacobian parts: time 0.07523/7.501, allocations: 34.42 MB / 2.389 GB, free: 47.95 MB / 1.076 GB
Notification: Performance of simCode: some other stuff during SimCode phase: time 0.01613/7.517, allocations: 6.917 MB / 2.396 GB, free: 40.98 MB / 1.076 GB
Notification: Performance of simCode: alias equations: time 0.03941/7.557, allocations: 16.62 MB / 2.412 GB, free: 24.33 MB / 1.076 GB
Notification: Performance of simCode: all other stuff during SimCode phase: time 0.01047/7.567, allocations: 1.557 MB / 2.413 GB, free: 22.77 MB / 1.076 GB
Notification: Performance of SimCode: time 1.813e-06/7.567, allocations: 3.938 kB / 2.413 GB, free: 22.77 MB / 1.076 GB
Notification: Performance of Templates: time 0.9293/8.497, allocations: 311 MB / 2.717 GB, free: 284 MB / 1.076 GB
make -j1 -f ThermofluidStream_dev_ThermofluidStream.Examples.HeatPump.makefile
(rm -f ThermofluidStream_dev_ThermofluidStream.Examples.HeatPump.pipe ; mkfifo ThermofluidStream_dev_ThermofluidStream.Examples.HeatPump.pipe ; head -c 1048576 < ThermofluidStream_dev_ThermofluidStream.Examples.HeatPump.pipe >> ../files/ThermofluidStream_dev_ThermofluidStream.Examples.HeatPump.sim & ./ThermofluidStream_dev_ThermofluidStream.Examples.HeatPump  -abortSlowSimulation -alarm=1200  -emit_protected -lv LOG_STATS > ThermofluidStream_dev_ThermofluidStream.Examples.HeatPump.pipe 2>&1)
diffSimulationResults("ThermofluidStream_dev_ThermofluidStream.Examples.HeatPump_res.mat","/mnt/ReferenceFiles/ThermofluidStream-main-regression/ReferenceData/ThermofluidStream.Examples.HeatPump_ref.mat","/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/files/ThermofluidStream_dev_ThermofluidStream.Examples.HeatPump.diff",relTol=0.003,relTolDiffMinMax=0.003,rangeDelta=0.001)
Reference file matches