Environment - simulationEnvironment:
startTime=0
stopTime=10800
tolerance=1e-06
numberOfIntervals=2500
stepSize=4.32
Regular simulation: ./Buildings_10_Buildings.Examples.Tutorial.SpaceCooling.System2  -abortSlowSimulation -alarm=400  -emit_protected -lv LOG_STATS
assert            | warning | The following assertion has been violated during initialization at time 0.000000
|                 | |       | fan.nominalValuesDefineDefaultPressureCurve
assert            | warning | *** Warning in System2.fan: Mover is flow or pressure controlled and uses default pressure curve.
|                 | |       | This leads to an approximate power consumption.
|                 | |       | Set nominalValuesDefineDefaultPressureCurve=true to suppress this warning.
assert            | warning | The following assertion has been violated during initialization at time 0.000000
|                 | |       | not (fan.per.etaHydMet == Buildings.Fluid.Movers.BaseClasses.Types.HydraulicEfficiencyMethod.Power_VolumeFlowRate or fan.per.etaHydMet == Buildings.Fluid.Movers.BaseClasses.Types.HydraulicEfficiencyMethod.EulerNumber)
assert            | warning | *** Warning in System2.fan: Mover has per.etaHydMet=.Power_VolumeFlowRate or per.etaHydMet=.EulerNumber.
|                 | |       | This requires per.pressure to be provided.
|                 | |       | Because it is not, the model overrides this setting by using per.etaHydMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve.
assert            | warning | The following assertion has been violated during initialization at time 0.000000
|                 | |       | fan.per.haveWMot_nominal or not (fan.per.etaMotMet == Buildings.Fluid.Movers.BaseClasses.Types.MotorEfficiencyMethod.Efficiency_MotorPartLoadRatio or fan.per.etaMotMet == Buildings.Fluid.Movers.BaseClasses.Types.MotorEfficiencyMethod.GenericCurve)
assert            | warning | *** Warning in System2.fan: Mover has per.etaMotMet=.Efficiency_MotorPartLoadRatio or per.etaMotMet=.GenericCurve.
|                 | |       | This requires per.WMot_nominal or per.pressure to be provided. Because neither is provided,
|                 | |       | the model overrides this setting and by using per.etaMotMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve.
assert            | warning | The following assertion has been violated at time 0.000000
|                 | |       | cooCoi.SHR >= 0.0 and cooCoi.SHR <= 1.0
assert            | warning | Variable violating min/max constraint: 0.0 <= cooCoi.SHR <= 1.0, has value: -1.2124e-18
LOG_SUCCESS       | info    | The initialization finished successfully with 3 homotopy steps.
LOG_STATS         | info    | ### STATISTICS ###
|                 | |       | | timer
|                 | |       | | |    0.0240234s          reading init.xml
|                 | |       | | |   0.00229249s          reading info.xml
|                 | |       | | |  0.000795191s [  0.7%] pre-initialization
|                 | |       | | |    0.0346967s [ 28.8%] initialization
|                 | |       | | |   1.2012e-05s [  0.0%] steps
|                 | |       | | |   0.00183121s [  1.5%] solver (excl. callbacks)
|                 | |       | | |   0.00356615s [  3.0%] creating output-file
|                 | |       | | |  0.000526065s [  0.4%] event-handling
|                 | |       | | |     0.017886s [ 14.9%] overhead
|                 | |       | | |    0.0610073s [ 50.7%] simulation
|                 | |       | | |     0.120321s [100.0%] total
|                 | |       | | events
|                 | |       | | |     0 state events
|                 | |       | | |     0 time events
|                 | |       | | solver: dassl
|                 | |       | | |   226 steps taken
|                 | |       | | |   283 calls of functionODE
|                 | |       | | |    26 evaluations of jacobian
|                 | |       | | |     1 error test failures
|                 | |       | | |     0 convergence test failures
|                 | |       | | | 0.000941469s time of jacobian evaluation
LOG_SUCCESS       | info    | The simulation finished successfully.