Environment - simulationEnvironment:
startTime=0
stopTime=172800
tolerance=1e-06
numberOfIntervals=2500
stepSize=69.12
Regular simulation: ./Buildings_10_Buildings.Examples.Tutorial.Boiler.System2  -abortSlowSimulation -alarm=400  -emit_protected -lv LOG_STATS
assert            | warning | The following assertion has been violated during initialization at time 0.000000
|                 | |       | pumRad.nominalValuesDefineDefaultPressureCurve
assert            | warning | *** Warning in System2.pumRad: Mover is flow or pressure controlled and uses default pressure curve.
|                 | |       | This leads to an approximate power consumption.
|                 | |       | Set nominalValuesDefineDefaultPressureCurve=true to suppress this warning.
assert            | warning | The following assertion has been violated during initialization at time 0.000000
|                 | |       | not (pumRad.per.etaHydMet == Buildings.Fluid.Movers.BaseClasses.Types.HydraulicEfficiencyMethod.Power_VolumeFlowRate or pumRad.per.etaHydMet == Buildings.Fluid.Movers.BaseClasses.Types.HydraulicEfficiencyMethod.EulerNumber)
assert            | warning | *** Warning in System2.pumRad: Mover has per.etaHydMet=.Power_VolumeFlowRate or per.etaHydMet=.EulerNumber.
|                 | |       | This requires per.pressure to be provided.
|                 | |       | Because it is not, the model overrides this setting by using per.etaHydMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve.
assert            | warning | The following assertion has been violated during initialization at time 0.000000
|                 | |       | pumRad.per.haveWMot_nominal or not (pumRad.per.etaMotMet == Buildings.Fluid.Movers.BaseClasses.Types.MotorEfficiencyMethod.Efficiency_MotorPartLoadRatio or pumRad.per.etaMotMet == Buildings.Fluid.Movers.BaseClasses.Types.MotorEfficiencyMethod.GenericCurve)
assert            | warning | *** Warning in System2.pumRad: Mover has per.etaMotMet=.Efficiency_MotorPartLoadRatio or per.etaMotMet=.GenericCurve.
|                 | |       | This requires per.WMot_nominal or per.pressure to be provided. Because neither is provided,
|                 | |       | the model overrides this setting and by using per.etaMotMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve.
LOG_SUCCESS       | info    | The initialization finished successfully without homotopy method.
LOG_STATS         | info    | ### STATISTICS ###
|                 | |       | | timer
|                 | |       | | |    0.0177078s          reading init.xml
|                 | |       | | |   0.00162249s          reading info.xml
|                 | |       | | |  0.000775875s [  0.3%] pre-initialization
|                 | |       | | |  0.000571893s [  0.2%] initialization
|                 | |       | | |    6.062e-06s [  0.0%] steps
|                 | |       | | |    0.0173029s [  7.4%] solver (excl. callbacks)
|                 | |       | | |   0.00220687s [  0.9%] creating output-file
|                 | |       | | |    0.0617324s [ 26.6%] event-handling
|                 | |       | | |    0.0100966s [  4.3%] overhead
|                 | |       | | |     0.139757s [ 60.1%] simulation
|                 | |       | | |      0.23245s [100.0%] total
|                 | |       | | events
|                 | |       | | |   120 state events
|                 | |       | | |     0 time events
|                 | |       | | solver: dassl
|                 | |       | | | 15747 steps taken
|                 | |       | | | 18787 calls of functionODE
|                 | |       | | |  2992 evaluations of jacobian
|                 | |       | | |   234 error test failures
|                 | |       | | |     0 convergence test failures
|                 | |       | | | 0.0686529s time of jacobian evaluation
LOG_SUCCESS       | info    | The simulation finished successfully.