Environment - simulationEnvironment:
startTime=0
stopTime=5000
tolerance=1e-06
numberOfIntervals=2500
stepSize=2
Regular simulation: ./Buildings_10_Buildings.Fluid.HeatExchangers.ActiveBeams.Validation.NumberOfBeams  -abortSlowSimulation -alarm=480  -emit_protected -lv LOG_STATS
assert            | warning | The following assertion has been violated during initialization at time 0.000000
|                 | |       | not (pumHotWat.per.etaHydMet == Buildings.Fluid.Movers.BaseClasses.Types.HydraulicEfficiencyMethod.Power_VolumeFlowRate or pumHotWat.per.etaHydMet == Buildings.Fluid.Movers.BaseClasses.Types.HydraulicEfficiencyMethod.EulerNumber)
assert            | warning | *** Warning in Buildings.Fluid.HeatExchangers.ActiveBeams.Validation.NumberOfBeams.pumHotWat: Mover has per.etaHydMet=.Power_VolumeFlowRate or per.etaHydMet=.EulerNumber.
|                 | |       | This requires per.pressure to be provided.
|                 | |       | Because it is not, the model overrides this setting by using per.etaHydMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve.
assert            | warning | The following assertion has been violated during initialization at time 0.000000
|                 | |       | pumHotWat.per.haveWMot_nominal or not (pumHotWat.per.etaMotMet == Buildings.Fluid.Movers.BaseClasses.Types.MotorEfficiencyMethod.Efficiency_MotorPartLoadRatio or pumHotWat.per.etaMotMet == Buildings.Fluid.Movers.BaseClasses.Types.MotorEfficiencyMethod.GenericCurve)
assert            | warning | *** Warning in Buildings.Fluid.HeatExchangers.ActiveBeams.Validation.NumberOfBeams.pumHotWat: Mover has per.etaMotMet=.Efficiency_MotorPartLoadRatio or per.etaMotMet=.GenericCurve.
|                 | |       | This requires per.WMot_nominal or per.pressure to be provided. Because neither is provided,
|                 | |       | the model overrides this setting and by using per.etaMotMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve.
assert            | warning | The following assertion has been violated during initialization at time 0.000000
|                 | |       | not (pumChiWat.per.etaHydMet == Buildings.Fluid.Movers.BaseClasses.Types.HydraulicEfficiencyMethod.Power_VolumeFlowRate or pumChiWat.per.etaHydMet == Buildings.Fluid.Movers.BaseClasses.Types.HydraulicEfficiencyMethod.EulerNumber)
assert            | warning | *** Warning in Buildings.Fluid.HeatExchangers.ActiveBeams.Validation.NumberOfBeams.pumChiWat: Mover has per.etaHydMet=.Power_VolumeFlowRate or per.etaHydMet=.EulerNumber.
|                 | |       | This requires per.pressure to be provided.
|                 | |       | Because it is not, the model overrides this setting by using per.etaHydMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve.
assert            | warning | The following assertion has been violated during initialization at time 0.000000
|                 | |       | pumChiWat.per.haveWMot_nominal or not (pumChiWat.per.etaMotMet == Buildings.Fluid.Movers.BaseClasses.Types.MotorEfficiencyMethod.Efficiency_MotorPartLoadRatio or pumChiWat.per.etaMotMet == Buildings.Fluid.Movers.BaseClasses.Types.MotorEfficiencyMethod.GenericCurve)
assert            | warning | *** Warning in Buildings.Fluid.HeatExchangers.ActiveBeams.Validation.NumberOfBeams.pumChiWat: Mover has per.etaMotMet=.Efficiency_MotorPartLoadRatio or per.etaMotMet=.GenericCurve.
|                 | |       | This requires per.WMot_nominal or per.pressure to be provided. Because neither is provided,
|                 | |       | the model overrides this setting and by using per.etaMotMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve.
assert            | warning | The following assertion has been violated during initialization at time 0.000000
|                 | |       | not (pumHotWat10.per.etaHydMet == Buildings.Fluid.Movers.BaseClasses.Types.HydraulicEfficiencyMethod.Power_VolumeFlowRate or pumHotWat10.per.etaHydMet == Buildings.Fluid.Movers.BaseClasses.Types.HydraulicEfficiencyMethod.EulerNumber)
assert            | warning | *** Warning in Buildings.Fluid.HeatExchangers.ActiveBeams.Validation.NumberOfBeams.pumHotWat10: Mover has per.etaHydMet=.Power_VolumeFlowRate or per.etaHydMet=.EulerNumber.
|                 | |       | This requires per.pressure to be provided.
|                 | |       | Because it is not, the model overrides this setting by using per.etaHydMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve.
assert            | warning | The following assertion has been violated during initialization at time 0.000000
|                 | |       | pumHotWat10.per.haveWMot_nominal or not (pumHotWat10.per.etaMotMet == Buildings.Fluid.Movers.BaseClasses.Types.MotorEfficiencyMethod.Efficiency_MotorPartLoadRatio or pumHotWat10.per.etaMotMet == Buildings.Fluid.Movers.BaseClasses.Types.MotorEfficiencyMethod.GenericCurve)
assert            | warning | *** Warning in Buildings.Fluid.HeatExchangers.ActiveBeams.Validation.NumberOfBeams.pumHotWat10: Mover has per.etaMotMet=.Efficiency_MotorPartLoadRatio or per.etaMotMet=.GenericCurve.
|                 | |       | This requires per.WMot_nominal or per.pressure to be provided. Because neither is provided,
|                 | |       | the model overrides this setting and by using per.etaMotMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve.
assert            | warning | The following assertion has been violated during initialization at time 0.000000
|                 | |       | not (pumChiWat10.per.etaHydMet == Buildings.Fluid.Movers.BaseClasses.Types.HydraulicEfficiencyMethod.Power_VolumeFlowRate or pumChiWat10.per.etaHydMet == Buildings.Fluid.Movers.BaseClasses.Types.HydraulicEfficiencyMethod.EulerNumber)
assert            | warning | *** Warning in Buildings.Fluid.HeatExchangers.ActiveBeams.Validation.NumberOfBeams.pumChiWat10: Mover has per.etaHydMet=.Power_VolumeFlowRate or per.etaHydMet=.EulerNumber.
|                 | |       | This requires per.pressure to be provided.
|                 | |       | Because it is not, the model overrides this setting by using per.etaHydMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve.
assert            | warning | The following assertion has been violated during initialization at time 0.000000
|                 | |       | pumChiWat10.per.haveWMot_nominal or not (pumChiWat10.per.etaMotMet == Buildings.Fluid.Movers.BaseClasses.Types.MotorEfficiencyMethod.Efficiency_MotorPartLoadRatio or pumChiWat10.per.etaMotMet == Buildings.Fluid.Movers.BaseClasses.Types.MotorEfficiencyMethod.GenericCurve)
assert            | warning | *** Warning in Buildings.Fluid.HeatExchangers.ActiveBeams.Validation.NumberOfBeams.pumChiWat10: Mover has per.etaMotMet=.Efficiency_MotorPartLoadRatio or per.etaMotMet=.GenericCurve.
|                 | |       | This requires per.WMot_nominal or per.pressure to be provided. Because neither is provided,
|                 | |       | the model overrides this setting and by using per.etaMotMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve.
LOG_SUCCESS       | info    | The initialization finished successfully without homotopy method.
LOG_STATS         | info    | ### STATISTICS ###
|                 | |       | | timer
|                 | |       | | |    0.0358827s          reading init.xml
|                 | |       | | |   0.00448104s          reading info.xml
|                 | |       | | |   0.00103113s [  3.1%] pre-initialization
|                 | |       | | |  0.000508704s [  1.5%] initialization
|                 | |       | | |    2.986e-06s [  0.0%] steps
|                 | |       | | |   1.1273e-05s [  0.0%] solver (excl. callbacks)
|                 | |       | | |   0.00283141s [  8.5%] creating output-file
|                 | |       | | |  0.000635005s [  1.9%] event-handling
|                 | |       | | |    0.0114152s [ 34.4%] overhead
|                 | |       | | |    0.0167589s [ 50.5%] simulation
|                 | |       | | |    0.0331946s [100.0%] total
|                 | |       | | events
|                 | |       | | |     3 state events
|                 | |       | | |     0 time events
|                 | |       | | solver: euler
|                 | |       | | | 12509 steps taken
|                 | |       | | | 12509 calls of functionODE
|                 | |       | | |     0 evaluations of jacobian
|                 | |       | | |     0 error test failures
|                 | |       | | |     0 convergence test failures
|                 | |       | | | 0s time of jacobian evaluation
LOG_SUCCESS       | info    | The simulation finished successfully.