/home/hudson/saved_omc/OMSimulator/install/bin/OMSimulator -r=Buildings_10_Buildings.Experimental.DHC.EnergyTransferStations.Combined.Validation.ChillerWSE_res.mat --tempDir=temp_Buildings_10_Buildings_Experimental_DHC_EnergyTransferStations_Combined_Validation_ChillerWSE_fmu --startTime=0 --stopTime=360000 --timeout=50 --tolerance=1e-06 Buildings_10_Buildings_Experimental_DHC_EnergyTransferStations_Combined_Validation_ChillerWSE.fmu
warning: /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/Buildings_10_Buildings.Experimental.DHC.EnergyTransferStations.Combined.Validation.ChillerWSE/temp_Buildings_10_Buildings_Experimental_DHC_EnergyTransferStations_Combined_Validation_ChillerWSE_fmu/model-yeael1a0/temp/0001_Buildings_10_Buildings_Experimental_DHC_EnergyTransferStations_Combined_Validation_ChillerWSE (logStatusWarning): The following assertion has been violated at time 0.000000
         (if ets.WSE.val2.res1.m_flow_nominal_pos > 1e-15 then ets.WSE.val2.res1.m_flow_nominal_pos else 1.0) >= -100000.0 and (if ets.WSE.val2.res1.m_flow_nominal_pos > 1e-15 then ets.WSE.val2.res1.m_flow_nominal_pos else 1.0) <= -0.0
assert            | warning | Nominal variable violating min/max constraint: -100000.0 <= $cse52 <= -0.0, has value: 34.0136
warning: /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/Buildings_10_Buildings.Experimental.DHC.EnergyTransferStations.Combined.Validation.ChillerWSE/temp_Buildings_10_Buildings_Experimental_DHC_EnergyTransferStations_Combined_Validation_ChillerWSE_fmu/model-yeael1a0/temp/0001_Buildings_10_Buildings_Experimental_DHC_EnergyTransferStations_Combined_Validation_ChillerWSE (logStatusWarning): /home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.0.0+maint.om/Fluid/Interfaces.mo:13: The following assertion has been violated at time 0.000000
         (if ets.splWSE.res1.m_flow_nominal_pos > 1e-15 then ets.splWSE.res1.m_flow_nominal_pos else 1.0) >= -100000.0 and (if ets.splWSE.res1.m_flow_nominal_pos > 1e-15 then ets.splWSE.res1.m_flow_nominal_pos else 1.0) <= -0.0
assert            | warning | Nominal variable violating min/max constraint: -100000.0 <= disWat.ports[1].m_flow <= -0.0, has value: 95.2381
warning: /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/Buildings_10_Buildings.Experimental.DHC.EnergyTransferStations.Combined.Validation.ChillerWSE/temp_Buildings_10_Buildings_Experimental_DHC_EnergyTransferStations_Combined_Validation_ChillerWSE_fmu/model-yeael1a0/temp/0001_Buildings_10_Buildings_Experimental_DHC_EnergyTransferStations_Combined_Validation_ChillerWSE (logStatusWarning): /home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.0-maint.10.0.x/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:417: The following assertion has been violated during initialization at time 0.000000
         not (ets.hex.pum1.per.etaHydMet == Buildings.Fluid.Movers.BaseClasses.Types.HydraulicEfficiencyMethod.Power_VolumeFlowRate or ets.hex.pum1.per.etaHydMet == Buildings.Fluid.Movers.BaseClasses.Types.HydraulicEfficiencyMethod.EulerNumber)
assert            | warning | *** Warning in Buildings.Experimental.DHC.EnergyTransferStations.Combined.Validation.ChillerWSE.ets.hex.pum1: Mover has per.etaHydMet=.Power_VolumeFlowRate or per.etaHydMet=.EulerNumber.
|                 | |       | This requires per.pressure to be provided.
|                 | |       | Because it is not, the model overrides this setting by using per.etaHydMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve.
warning: /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/Buildings_10_Buildings.Experimental.DHC.EnergyTransferStations.Combined.Validation.ChillerWSE/temp_Buildings_10_Buildings_Experimental_DHC_EnergyTransferStations_Combined_Validation_ChillerWSE_fmu/model-yeael1a0/temp/0001_Buildings_10_Buildings_Experimental_DHC_EnergyTransferStations_Combined_Validation_ChillerWSE (logStatusWarning): /home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.0-maint.10.0.x/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:429: The following assertion has been violated during initialization at time 0.000000
         ets.hex.pum1.per.haveWMot_nominal or not (ets.hex.pum1.per.etaMotMet == Buildings.Fluid.Movers.BaseClasses.Types.MotorEfficiencyMethod.Efficiency_MotorPartLoadRatio or ets.hex.pum1.per.etaMotMet == Buildings.Fluid.Movers.BaseClasses.Types.MotorEfficiencyMethod.GenericCurve)
assert            | warning | *** Warning in Buildings.Experimental.DHC.EnergyTransferStations.Combined.Validation.ChillerWSE.ets.hex.pum1: Mover has per.etaMotMet=.Efficiency_MotorPartLoadRatio or per.etaMotMet=.GenericCurve.
|                 | |       | This requires per.WMot_nominal or per.pressure to be provided. Because neither is provided,
|                 | |       | the model overrides this setting and by using per.etaMotMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve.
warning: /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/Buildings_10_Buildings.Experimental.DHC.EnergyTransferStations.Combined.Validation.ChillerWSE/temp_Buildings_10_Buildings_Experimental_DHC_EnergyTransferStations_Combined_Validation_ChillerWSE_fmu/model-yeael1a0/temp/0001_Buildings_10_Buildings_Experimental_DHC_EnergyTransferStations_Combined_Validation_ChillerWSE (logStatusWarning): /home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.0-maint.10.0.x/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:417: The following assertion has been violated during initialization at time 0.000000
         not (ets.hex.pum2.per.etaHydMet == Buildings.Fluid.Movers.BaseClasses.Types.HydraulicEfficiencyMethod.Power_VolumeFlowRate or ets.hex.pum2.per.etaHydMet == Buildings.Fluid.Movers.BaseClasses.Types.HydraulicEfficiencyMethod.EulerNumber)
assert            | warning | *** Warning in Buildings.Experimental.DHC.EnergyTransferStations.Combined.Validation.ChillerWSE.ets.hex.pum2: Mover has per.etaHydMet=.Power_VolumeFlowRate or per.etaHydMet=.EulerNumber.
|                 | |       | This requires per.pressure to be provided.
|                 | |       | Because it is not, the model overrides this setting by using per.etaHydMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve.
warning: /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/Buildings_10_Buildings.Experimental.DHC.EnergyTransferStations.Combined.Validation.ChillerWSE/temp_Buildings_10_Buildings_Experimental_DHC_EnergyTransferStations_Combined_Validation_ChillerWSE_fmu/model-yeael1a0/temp/0001_Buildings_10_Buildings_Experimental_DHC_EnergyTransferStations_Combined_Validation_ChillerWSE (logStatusWarning): /home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.0-maint.10.0.x/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:429: The following assertion has been violated during initialization at time 0.000000
         ets.hex.pum2.per.haveWMot_nominal or not (ets.hex.pum2.per.etaMotMet == Buildings.Fluid.Movers.BaseClasses.Types.MotorEfficiencyMethod.Efficiency_MotorPartLoadRatio or ets.hex.pum2.per.etaMotMet == Buildings.Fluid.Movers.BaseClasses.Types.MotorEfficiencyMethod.GenericCurve)
assert            | warning | *** Warning in Buildings.Experimental.DHC.EnergyTransferStations.Combined.Validation.ChillerWSE.ets.hex.pum2: Mover has per.etaMotMet=.Efficiency_MotorPartLoadRatio or per.etaMotMet=.GenericCurve.
|                 | |       | This requires per.WMot_nominal or per.pressure to be provided. Because neither is provided,
|                 | |       | the model overrides this setting and by using per.etaMotMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve.
warning: /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/Buildings_10_Buildings.Experimental.DHC.EnergyTransferStations.Combined.Validation.ChillerWSE/temp_Buildings_10_Buildings_Experimental_DHC_EnergyTransferStations_Combined_Validation_ChillerWSE_fmu/model-yeael1a0/temp/0001_Buildings_10_Buildings_Experimental_DHC_EnergyTransferStations_Combined_Validation_ChillerWSE (logStatusWarning): /home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.0-maint.10.0.x/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:417: The following assertion has been violated during initialization at time 0.000000
         not (ets.chi.pumCon.per.etaHydMet == Buildings.Fluid.Movers.BaseClasses.Types.HydraulicEfficiencyMethod.Power_VolumeFlowRate or ets.chi.pumCon.per.etaHydMet == Buildings.Fluid.Movers.BaseClasses.Types.HydraulicEfficiencyMethod.EulerNumber)
assert            | warning | *** Warning in Buildings.Experimental.DHC.EnergyTransferStations.Combined.Validation.ChillerWSE.ets.chi.pumCon: Mover has per.etaHydMet=.Power_VolumeFlowRate or per.etaHydMet=.EulerNumber.
|                 | |       | This requires per.pressure to be provided.
|                 | |       | Because it is not, the model overrides this setting by using per.etaHydMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve.
warning: /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/Buildings_10_Buildings.Experimental.DHC.EnergyTransferStations.Combined.Validation.ChillerWSE/temp_Buildings_10_Buildings_Experimental_DHC_EnergyTransferStations_Combined_Validation_ChillerWSE_fmu/model-yeael1a0/temp/0001_Buildings_10_Buildings_Experimental_DHC_EnergyTransferStations_Combined_Validation_ChillerWSE (logStatusWarning): /home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.0-maint.10.0.x/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:429: The following assertion has been violated during initialization at time 0.000000
         ets.chi.pumCon.per.haveWMot_nominal or not (ets.chi.pumCon.per.etaMotMet == Buildings.Fluid.Movers.BaseClasses.Types.MotorEfficiencyMethod.Efficiency_MotorPartLoadRatio or ets.chi.pumCon.per.etaMotMet == Buildings.Fluid.Movers.BaseClasses.Types.MotorEfficiencyMethod.GenericCurve)
assert            | warning | *** Warning in Buildings.Experimental.DHC.EnergyTransferStations.Combined.Validation.ChillerWSE.ets.chi.pumCon: Mover has per.etaMotMet=.Efficiency_MotorPartLoadRatio or per.etaMotMet=.GenericCurve.
|                 | |       | This requires per.WMot_nominal or per.pressure to be provided. Because neither is provided,
|                 | |       | the model overrides this setting and by using per.etaMotMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve.
warning: /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/Buildings_10_Buildings.Experimental.DHC.EnergyTransferStations.Combined.Validation.ChillerWSE/temp_Buildings_10_Buildings_Experimental_DHC_EnergyTransferStations_Combined_Validation_ChillerWSE_fmu/model-yeael1a0/temp/0001_Buildings_10_Buildings_Experimental_DHC_EnergyTransferStations_Combined_Validation_ChillerWSE (logStatusWarning): /home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.0-maint.10.0.x/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:417: The following assertion has been violated during initialization at time 0.000000
         not (ets.chi.pumEva.per.etaHydMet == Buildings.Fluid.Movers.BaseClasses.Types.HydraulicEfficiencyMethod.Power_VolumeFlowRate or ets.chi.pumEva.per.etaHydMet == Buildings.Fluid.Movers.BaseClasses.Types.HydraulicEfficiencyMethod.EulerNumber)
assert            | warning | *** Warning in Buildings.Experimental.DHC.EnergyTransferStations.Combined.Validation.ChillerWSE.ets.chi.pumEva: Mover has per.etaHydMet=.Power_VolumeFlowRate or per.etaHydMet=.EulerNumber.
|                 | |       | This requires per.pressure to be provided.
|                 | |       | Because it is not, the model overrides this setting by using per.etaHydMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve.
warning: /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/Buildings_10_Buildings.Experimental.DHC.EnergyTransferStations.Combined.Validation.ChillerWSE/temp_Buildings_10_Buildings_Experimental_DHC_EnergyTransferStations_Combined_Validation_ChillerWSE_fmu/model-yeael1a0/temp/0001_Buildings_10_Buildings_Experimental_DHC_EnergyTransferStations_Combined_Validation_ChillerWSE (logStatusWarning): /home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.0-maint.10.0.x/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:429: The following assertion has been violated during initialization at time 0.000000
         ets.chi.pumEva.per.haveWMot_nominal or not (ets.chi.pumEva.per.etaMotMet == Buildings.Fluid.Movers.BaseClasses.Types.MotorEfficiencyMethod.Efficiency_MotorPartLoadRatio or ets.chi.pumEva.per.etaMotMet == Buildings.Fluid.Movers.BaseClasses.Types.MotorEfficiencyMethod.GenericCurve)
assert            | warning | *** Warning in Buildings.Experimental.DHC.EnergyTransferStations.Combined.Validation.ChillerWSE.ets.chi.pumEva: Mover has per.etaMotMet=.Efficiency_MotorPartLoadRatio or per.etaMotMet=.GenericCurve.
|                 | |       | This requires per.WMot_nominal or per.pressure to be provided. Because neither is provided,
|                 | |       | the model overrides this setting and by using per.etaMotMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve.
warning: /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/Buildings_10_Buildings.Experimental.DHC.EnergyTransferStations.Combined.Validation.ChillerWSE/temp_Buildings_10_Buildings_Experimental_DHC_EnergyTransferStations_Combined_Validation_ChillerWSE_fmu/model-yeael1a0/temp/0001_Buildings_10_Buildings_Experimental_DHC_EnergyTransferStations_Combined_Validation_ChillerWSE (logStatusWarning): /home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.0-maint.10.0.x/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:417: The following assertion has been violated during initialization at time 0.000000
         not (ets.WSE.pum1.per.etaHydMet == Buildings.Fluid.Movers.BaseClasses.Types.HydraulicEfficiencyMethod.Power_VolumeFlowRate or ets.WSE.pum1.per.etaHydMet == Buildings.Fluid.Movers.BaseClasses.Types.HydraulicEfficiencyMethod.EulerNumber)
assert            | warning | *** Warning in Buildings.Experimental.DHC.EnergyTransferStations.Combined.Validation.ChillerWSE.ets.WSE.pum1: Mover has per.etaHydMet=.Power_VolumeFlowRate or per.etaHydMet=.EulerNumber.
|                 | |       | This requires per.pressure to be provided.
|                 | |       | Because it is not, the model overrides this setting by using per.etaHydMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve.
warning: /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/Buildings_10_Buildings.Experimental.DHC.EnergyTransferStations.Combined.Validation.ChillerWSE/temp_Buildings_10_Buildings_Experimental_DHC_EnergyTransferStations_Combined_Validation_ChillerWSE_fmu/model-yeael1a0/temp/0001_Buildings_10_Buildings_Experimental_DHC_EnergyTransferStations_Combined_Validation_ChillerWSE (logStatusWarning): /home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.0-maint.10.0.x/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:429: The following assertion has been violated during initialization at time 0.000000
         ets.WSE.pum1.per.haveWMot_nominal or not (ets.WSE.pum1.per.etaMotMet == Buildings.Fluid.Movers.BaseClasses.Types.MotorEfficiencyMethod.Efficiency_MotorPartLoadRatio or ets.WSE.pum1.per.etaMotMet == Buildings.Fluid.Movers.BaseClasses.Types.MotorEfficiencyMethod.GenericCurve)
assert            | warning | *** Warning in Buildings.Experimental.DHC.EnergyTransferStations.Combined.Validation.ChillerWSE.ets.WSE.pum1: Mover has per.etaMotMet=.Efficiency_MotorPartLoadRatio or per.etaMotMet=.GenericCurve.
|                 | |       | This requires per.WMot_nominal or per.pressure to be provided. Because neither is provided,
|                 | |       | the model overrides this setting and by using per.etaMotMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve.
warning: /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/Buildings_10_Buildings.Experimental.DHC.EnergyTransferStations.Combined.Validation.ChillerWSE/temp_Buildings_10_Buildings_Experimental_DHC_EnergyTransferStations_Combined_Validation_ChillerWSE_fmu/model-yeael1a0/temp/0001_Buildings_10_Buildings_Experimental_DHC_EnergyTransferStations_Combined_Validation_ChillerWSE (logStatusWarning): /home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.0-maint.10.0.x/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:417: The following assertion has been violated during initialization at time 0.000000
         not (pumChiWat.per.etaHydMet == Buildings.Fluid.Movers.BaseClasses.Types.HydraulicEfficiencyMethod.Power_VolumeFlowRate or pumChiWat.per.etaHydMet == Buildings.Fluid.Movers.BaseClasses.Types.HydraulicEfficiencyMethod.EulerNumber)
assert            | warning | *** Warning in Buildings.Experimental.DHC.EnergyTransferStations.Combined.Validation.ChillerWSE.pumChiWat: Mover has per.etaHydMet=.Power_VolumeFlowRate or per.etaHydMet=.EulerNumber.
|                 | |       | This requires per.pressure to be provided.
|                 | |       | Because it is not, the model overrides this setting by using per.etaHydMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve.
warning: /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/Buildings_10_Buildings.Experimental.DHC.EnergyTransferStations.Combined.Validation.ChillerWSE/temp_Buildings_10_Buildings_Experimental_DHC_EnergyTransferStations_Combined_Validation_ChillerWSE_fmu/model-yeael1a0/temp/0001_Buildings_10_Buildings_Experimental_DHC_EnergyTransferStations_Combined_Validation_ChillerWSE (logStatusWarning): /home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.0-maint.10.0.x/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:429: The following assertion has been violated during initialization at time 0.000000
         pumChiWat.per.haveWMot_nominal or not (pumChiWat.per.etaMotMet == Buildings.Fluid.Movers.BaseClasses.Types.MotorEfficiencyMethod.Efficiency_MotorPartLoadRatio or pumChiWat.per.etaMotMet == Buildings.Fluid.Movers.BaseClasses.Types.MotorEfficiencyMethod.GenericCurve)
assert            | warning | *** Warning in Buildings.Experimental.DHC.EnergyTransferStations.Combined.Validation.ChillerWSE.pumChiWat: Mover has per.etaMotMet=.Efficiency_MotorPartLoadRatio or per.etaMotMet=.GenericCurve.
|                 | |       | This requires per.WMot_nominal or per.pressure to be provided. Because neither is provided,
|                 | |       | the model overrides this setting and by using per.etaMotMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve.
warning: /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/Buildings_10_Buildings.Experimental.DHC.EnergyTransferStations.Combined.Validation.ChillerWSE/temp_Buildings_10_Buildings_Experimental_DHC_EnergyTransferStations_Combined_Validation_ChillerWSE_fmu/model-yeael1a0/temp/0001_Buildings_10_Buildings_Experimental_DHC_EnergyTransferStations_Combined_Validation_ChillerWSE (logStatusWarning): /home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.0-maint.10.0.x/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:417: The following assertion has been violated during initialization at time 0.000000
         not (pumHeaWat.per.etaHydMet == Buildings.Fluid.Movers.BaseClasses.Types.HydraulicEfficiencyMethod.Power_VolumeFlowRate or pumHeaWat.per.etaHydMet == Buildings.Fluid.Movers.BaseClasses.Types.HydraulicEfficiencyMethod.EulerNumber)
assert            | warning | *** Warning in Buildings.Experimental.DHC.EnergyTransferStations.Combined.Validation.ChillerWSE.pumHeaWat: Mover has per.etaHydMet=.Power_VolumeFlowRate or per.etaHydMet=.EulerNumber.
|                 | |       | This requires per.pressure to be provided.
|                 | |       | Because it is not, the model overrides this setting by using per.etaHydMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve.
warning: /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/Buildings_10_Buildings.Experimental.DHC.EnergyTransferStations.Combined.Validation.ChillerWSE/temp_Buildings_10_Buildings_Experimental_DHC_EnergyTransferStations_Combined_Validation_ChillerWSE_fmu/model-yeael1a0/temp/0001_Buildings_10_Buildings_Experimental_DHC_EnergyTransferStations_Combined_Validation_ChillerWSE (logStatusWarning): /home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.0-maint.10.0.x/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:429: The following assertion has been violated during initialization at time 0.000000
         pumHeaWat.per.haveWMot_nominal or not (pumHeaWat.per.etaMotMet == Buildings.Fluid.Movers.BaseClasses.Types.MotorEfficiencyMethod.Efficiency_MotorPartLoadRatio or pumHeaWat.per.etaMotMet == Buildings.Fluid.Movers.BaseClasses.Types.MotorEfficiencyMethod.GenericCurve)
assert            | warning | *** Warning in Buildings.Experimental.DHC.EnergyTransferStations.Combined.Validation.ChillerWSE.pumHeaWat: Mover has per.etaMotMet=.Efficiency_MotorPartLoadRatio or per.etaMotMet=.GenericCurve.
|                 | |       | This requires per.WMot_nominal or per.pressure to be provided. Because neither is provided,
|                 | |       | the model overrides this setting and by using per.etaMotMet=.NotProvided.
|                 | |       | Also consider using models under Movers.Preconfigured which autopopulate a pressure curve.
warning: /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/Buildings_10_Buildings.Experimental.DHC.EnergyTransferStations.Combined.Validation.ChillerWSE/temp_Buildings_10_Buildings_Experimental_DHC_EnergyTransferStations_Combined_Validation_ChillerWSE_fmu/model-yeael1a0/temp/0001_Buildings_10_Buildings_Experimental_DHC_EnergyTransferStations_Combined_Validation_ChillerWSE (logStatusWarning): /home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.0.0+maint.om/Media/package.mo:5870: The following assertion has been violated at time 0.000000
         ets.WSE.hex.state_a2_inflow.T >= 1.0 and ets.WSE.hex.state_a2_inflow.T <= 10000.0
assert            | warning | Variable violating min/max constraint: 1.0 <= ets.WSE.hex.state_a2_inflow.T <= 10000.0, has value: 0
warning: /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/Buildings_10_Buildings.Experimental.DHC.EnergyTransferStations.Combined.Validation.ChillerWSE/temp_Buildings_10_Buildings_Experimental_DHC_EnergyTransferStations_Combined_Validation_ChillerWSE_fmu/model-yeael1a0/temp/0001_Buildings_10_Buildings_Experimental_DHC_EnergyTransferStations_Combined_Validation_ChillerWSE (logStatusWarning): /home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 10.1.0-maint.10.0.x/Fluid/HeatExchangers/BaseClasses/PartialEffectiveness.mo:13: The following assertion has been violated at time 0.000000
         ets.WSE.hex.T_in2 >= 1.0 and ets.WSE.hex.T_in2 <= 10000.0
assert            | warning | Variable violating min/max constraint: 1.0 <= ets.WSE.hex.T_in2 <= 10000.0, has value: 0
assert            | debug   | division by zero at time 0, (a=0) / (b=0), where divisor b expression is: 0.0
error:   [fmi2logger] /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/Buildings_10_Buildings.Experimental.DHC.EnergyTransferStations.Combined.Validation.ChillerWSE/temp_Buildings_10_Buildings_Experimental_DHC_EnergyTransferStations_Combined_Validation_ChillerWSE_fmu/model-yeael1a0/temp/0001_Buildings_10_Buildings_Experimental_DHC_EnergyTransferStations_Combined_Validation_ChillerWSE (logFmi2Call): internalEventUpdate: terminated by an assertion.
assert            | debug   | division by zero at time 0, (a=0) / (b=0), where divisor b expression is: 0.0
error:   [fmi2logger] /var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/Buildings_10_Buildings.Experimental.DHC.EnergyTransferStations.Combined.Validation.ChillerWSE/temp_Buildings_10_Buildings_Experimental_DHC_EnergyTransferStations_Combined_Validation_ChillerWSE_fmu/model-yeael1a0/temp/0001_Buildings_10_Buildings_Experimental_DHC_EnergyTransferStations_Combined_Validation_ChillerWSE (logFmi2Call): internalEventUpdate: terminated by an assertion.
error:   [doEventIteration] fmi2_import_new_discrete_states failed for FMU "model.root.Buildings_10_Buildings_Experimental_DHC_EnergyTransferStations_Combined_Validation_ChillerWSE"
error:   [initialize] Initialization of system "model.root" failed
error:   [simulate] Model "model" is in wrong model state
info:    18 warnings
info:    5 errors