Running: ./testmodel.py --libraries=/home/hudson/saved_omc/libraries/.openmodelica/libraries/ --ompython_omhome=/usr Buildings_8.0.0_Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3Clusters.conf.json loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/package.mo", uses=false) loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 3.2.3+maint.om/package.mo", uses=false) loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 3.2.3+maint.om/package.mo", uses=false) loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 3.2.3+maint.om/package.mo", uses=false) Using package ModelicaServices with version 3.2.3 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 3.2.3+maint.om/package.mo) Using package Modelica with version 3.2.3 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 3.2.3+maint.om/package.mo) Using package Complex with version 3.2.3 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 3.2.3+maint.om/package.mo) Using package Buildings with version 8.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/package.mo) Running command: "" <> buildModelFMU(Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3Clusters,fileNamePrefix="Buildings_8_0_0_Buildings_Obsolete_DistrictHeatingCooling_Examples_HeatingCoolingHotWater3Clusters",fmuType="me",version="2.0",platforms={"static"}) "" <> buildModelFMU(Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3Clusters,fileNamePrefix="Buildings_8_0_0_Buildings_Obsolete_DistrictHeatingCooling_Examples_HeatingCoolingHotWater3Clusters",fmuType="me",version="2.0",platforms={"static"}) Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/package.mo): time 2.604/2.604, allocations: 287.3 MB / 302.3 MB, free: 8.367 MB / 234.7 MB Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 3.2.3+maint.om/package.mo): time 0.001556/0.001556, allocations: 183 kB / 370.8 MB, free: 10.85 MB / 298.7 MB Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 3.2.3+maint.om/package.mo): time 2.053/2.053, allocations: 205.4 MB / 0.6295 GB, free: 10.59 MB / 458.7 MB Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 3.2.3+maint.om/package.mo): time 0.001128/0.001128, allocations: 78.94 kB / 0.7428 GB, free: 6.602 MB / 0.5573 GB Notification: Performance of FrontEnd - loaded program: time 0.0006494/0.0006498, allocations: 14.91 kB / 0.8657 GB, free: 141 MB / 0.6198 GB Notification: Performance of FrontEnd - Absyn->SCode: time 0.2313/0.232, allocations: 115.3 MB / 0.9783 GB, free: 28.3 MB / 0.6198 GB Notification: Performance of NFInst.instantiate(Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3Clusters): time 9.216/9.448, allocations: 2.372 GB / 3.35 GB, free: 7.711 MB / 1.51 GB Notification: Performance of NFInst.instExpressions: time 3.013/12.46, allocations: 475.3 MB / 3.815 GB, free: 41.52 MB / 1.745 GB Notification: Performance of NFInst.updateImplicitVariability: time 0.1353/12.6, allocations: 2.434 MB / 3.817 GB, free: 41.52 MB / 1.745 GB Notification: Performance of NFTyping.typeComponents: time 0.1628/12.76, allocations: 33.28 MB / 3.849 GB, free: 40.11 MB / 1.745 GB Notification: Performance of NFTyping.typeBindings: time 0.4552/13.21, allocations: 97.91 MB / 3.945 GB, free: 20.64 MB / 1.745 GB Notification: Performance of NFTyping.typeClassSections: time 0.2646/13.48, allocations: 62.17 MB / 4.006 GB, free: 5.801 MB / 1.745 GB [/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/NFFrontEnd/NFEvalFunction.mo:1112:9-1112:97:writable] Error: Internal error NFEvalFunction.evaluateKnownExternal: failed to evaluate ModelicaInternal_readLine Notification: Performance of NFFlatten.flatten: time 0.3218/13.8, allocations: 116.3 MB / 4.119 GB, free: 3.328 MB / 1.807 GB Notification: Performance of NFFlatten.resolveConnections: time 0.1823/13.98, allocations: 55.61 MB / 4.174 GB, free: 11.57 MB / 1.87 GB Notification: Performance of NFEvalConstants.evaluate: time 0.2172/14.2, allocations: 56.42 MB / 4.229 GB, free: 3.074 MB / 1.917 GB Notification: Performance of NFSimplifyModel.simplify: time 0.1101/14.31, allocations: 37.07 MB / 4.265 GB, free: 13.85 MB / 1.964 GB Notification: Performance of NFPackage.collectConstants: time 0.03072/14.34, allocations: 2.785 MB / 4.268 GB, free: 11.06 MB / 1.964 GB Notification: Performance of NFFlatten.collectFunctions: time 0.1447/14.49, allocations: 22.61 MB / 4.29 GB, free: 4.789 MB / 1.979 GB Notification: Performance of NFScalarize.scalarize: time 0.04104/14.53, allocations: 14.15 MB / 4.304 GB, free: 6.586 MB / 1.995 GB Notification: Performance of NFVerifyModel.verify: time 0.04935/14.58, allocations: 16.84 MB / 4.32 GB, free: 5.695 MB / 2.01 GB Notification: Performance of NFConvertDAE.convert: time 4.684/19.26, allocations: 108.4 MB / 4.426 GB, free: 122.2 MB / 2.073 GB Notification: Performance of FrontEnd - DAE generated: time 4.369e-06/19.26, allocations: 0 / 4.426 GB, free: 122.2 MB / 2.073 GB Notification: Performance of FrontEnd: time 2.815e-06/19.26, allocations: 0.8438 kB / 4.426 GB, free: 122.2 MB / 2.073 GB Notification: Performance of Transformations before backend: time 0.004871/19.27, allocations: 2.719 kB / 4.426 GB, free: 122.2 MB / 2.073 GB Notification: Model statistics after passing the front-end and creating the data structures used by the back-end: * Number of equations: 11889 * Number of variables: 11889 Notification: Performance of Generate backend data structure: time 0.2812/19.55, allocations: 71.8 MB / 4.496 GB, free: 90.76 MB / 2.073 GB Notification: Performance of prepare preOptimizeDAE: time 6.105e-05/19.55, allocations: 9.5 kB / 4.496 GB, free: 90.76 MB / 2.073 GB Notification: Performance of preOpt introduceOutputAliases (simulation): time 0.03239/19.58, allocations: 5.929 MB / 4.502 GB, free: 90.42 MB / 2.073 GB Notification: Performance of preOpt normalInlineFunction (simulation): time 0.1767/19.76, allocations: 20.66 MB / 4.522 GB, free: 85.67 MB / 2.073 GB Notification: Performance of preOpt evaluateParameters (simulation): time 0.2526/20.01, allocations: 67.86 MB / 4.588 GB, free: 77.37 MB / 2.073 GB [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-ret2.pumChi.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3Clusters.ret2.pumChi.eff.getArrayAsString(array((ret2.pumChi.eff.per.pressure.dp[i + 1] - ret2.pumChi.eff.per.pressure.dp[i]) / (ret2.pumChi.eff.per.pressure.V_flow[i + 1] - ret2.pumChi.eff.per.pressure.V_flow[i]) for i in 1:1), "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-ret2.pumHotWat.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3Clusters.ret2.pumHotWat.eff.getArrayAsString(array((ret2.pumHotWat.eff.per.pressure.dp[i + 1] - ret2.pumHotWat.eff.per.pressure.dp[i]) / (ret2.pumHotWat.eff.per.pressure.V_flow[i + 1] - ret2.pumHotWat.eff.per.pressure.V_flow[i]) for i in 1:1), "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-ret2.pumHea.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3Clusters.ret2.pumHea.eff.getArrayAsString(array((ret2.pumHea.eff.per.pressure.dp[i + 1] - ret2.pumHea.eff.per.pressure.dp[i]) / (ret2.pumHea.eff.per.pressure.V_flow[i + 1] - ret2.pumHea.eff.per.pressure.V_flow[i]) for i in 1:1), "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-apa2.pumChi.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3Clusters.apa2.pumChi.eff.getArrayAsString(array((apa2.pumChi.eff.per.pressure.dp[i + 1] - apa2.pumChi.eff.per.pressure.dp[i]) / (apa2.pumChi.eff.per.pressure.V_flow[i + 1] - apa2.pumChi.eff.per.pressure.V_flow[i]) for i in 1:1), "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-apa2.pumHotWat.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3Clusters.apa2.pumHotWat.eff.getArrayAsString(array((apa2.pumHotWat.eff.per.pressure.dp[i + 1] - apa2.pumHotWat.eff.per.pressure.dp[i]) / (apa2.pumHotWat.eff.per.pressure.V_flow[i + 1] - apa2.pumHotWat.eff.per.pressure.V_flow[i]) for i in 1:1), "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-apa2.pumHea.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3Clusters.apa2.pumHea.eff.getArrayAsString(array((apa2.pumHea.eff.per.pressure.dp[i + 1] - apa2.pumHea.eff.per.pressure.dp[i]) / (apa2.pumHea.eff.per.pressure.V_flow[i + 1] - apa2.pumHea.eff.per.pressure.V_flow[i]) for i in 1:1), "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff4.pumChi.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3Clusters.larOff4.pumChi.eff.getArrayAsString(array((larOff4.pumChi.eff.per.pressure.dp[i + 1] - larOff4.pumChi.eff.per.pressure.dp[i]) / (larOff4.pumChi.eff.per.pressure.V_flow[i + 1] - larOff4.pumChi.eff.per.pressure.V_flow[i]) for i in 1:1), "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff4.pumHotWat.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3Clusters.larOff4.pumHotWat.eff.getArrayAsString(array((larOff4.pumHotWat.eff.per.pressure.dp[i + 1] - larOff4.pumHotWat.eff.per.pressure.dp[i]) / (larOff4.pumHotWat.eff.per.pressure.V_flow[i + 1] - larOff4.pumHotWat.eff.per.pressure.V_flow[i]) for i in 1:1), "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff4.pumHea.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3Clusters.larOff4.pumHea.eff.getArrayAsString(array((larOff4.pumHea.eff.per.pressure.dp[i + 1] - larOff4.pumHea.eff.per.pressure.dp[i]) / (larOff4.pumHea.eff.per.pressure.V_flow[i + 1] - larOff4.pumHea.eff.per.pressure.V_flow[i]) for i in 1:1), "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff3.pumChi.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3Clusters.larOff3.pumChi.eff.getArrayAsString(array((larOff3.pumChi.eff.per.pressure.dp[i + 1] - larOff3.pumChi.eff.per.pressure.dp[i]) / (larOff3.pumChi.eff.per.pressure.V_flow[i + 1] - larOff3.pumChi.eff.per.pressure.V_flow[i]) for i in 1:1), "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff3.pumHotWat.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3Clusters.larOff3.pumHotWat.eff.getArrayAsString(array((larOff3.pumHotWat.eff.per.pressure.dp[i + 1] - larOff3.pumHotWat.eff.per.pressure.dp[i]) / (larOff3.pumHotWat.eff.per.pressure.V_flow[i + 1] - larOff3.pumHotWat.eff.per.pressure.V_flow[i]) for i in 1:1), "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff3.pumHea.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3Clusters.larOff3.pumHea.eff.getArrayAsString(array((larOff3.pumHea.eff.per.pressure.dp[i + 1] - larOff3.pumHea.eff.per.pressure.dp[i]) / (larOff3.pumHea.eff.per.pressure.V_flow[i + 1] - larOff3.pumHea.eff.per.pressure.V_flow[i]) for i in 1:1), "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-apa1.pumChi.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3Clusters.apa1.pumChi.eff.getArrayAsString(array((apa1.pumChi.eff.per.pressure.dp[i + 1] - apa1.pumChi.eff.per.pressure.dp[i]) / (apa1.pumChi.eff.per.pressure.V_flow[i + 1] - apa1.pumChi.eff.per.pressure.V_flow[i]) for i in 1:1), "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-apa1.pumHotWat.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3Clusters.apa1.pumHotWat.eff.getArrayAsString(array((apa1.pumHotWat.eff.per.pressure.dp[i + 1] - apa1.pumHotWat.eff.per.pressure.dp[i]) / (apa1.pumHotWat.eff.per.pressure.V_flow[i + 1] - apa1.pumHotWat.eff.per.pressure.V_flow[i]) for i in 1:1), "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-apa1.pumHea.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3Clusters.apa1.pumHea.eff.getArrayAsString(array((apa1.pumHea.eff.per.pressure.dp[i + 1] - apa1.pumHea.eff.per.pressure.dp[i]) / (apa1.pumHea.eff.per.pressure.V_flow[i + 1] - apa1.pumHea.eff.per.pressure.V_flow[i]) for i in 1:1), "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff2.pumChi.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3Clusters.larOff2.pumChi.eff.getArrayAsString(array((larOff2.pumChi.eff.per.pressure.dp[i + 1] - larOff2.pumChi.eff.per.pressure.dp[i]) / (larOff2.pumChi.eff.per.pressure.V_flow[i + 1] - larOff2.pumChi.eff.per.pressure.V_flow[i]) for i in 1:1), "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff2.pumHotWat.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3Clusters.larOff2.pumHotWat.eff.getArrayAsString(array((larOff2.pumHotWat.eff.per.pressure.dp[i + 1] - larOff2.pumHotWat.eff.per.pressure.dp[i]) / (larOff2.pumHotWat.eff.per.pressure.V_flow[i + 1] - larOff2.pumHotWat.eff.per.pressure.V_flow[i]) for i in 1:1), "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff2.pumHea.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3Clusters.larOff2.pumHea.eff.getArrayAsString(array((larOff2.pumHea.eff.per.pressure.dp[i + 1] - larOff2.pumHea.eff.per.pressure.dp[i]) / (larOff2.pumHea.eff.per.pressure.V_flow[i + 1] - larOff2.pumHea.eff.per.pressure.V_flow[i]) for i in 1:1), "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-ret1.pumChi.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3Clusters.ret1.pumChi.eff.getArrayAsString(array((ret1.pumChi.eff.per.pressure.dp[i + 1] - ret1.pumChi.eff.per.pressure.dp[i]) / (ret1.pumChi.eff.per.pressure.V_flow[i + 1] - ret1.pumChi.eff.per.pressure.V_flow[i]) for i in 1:1), "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-ret1.pumHotWat.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3Clusters.ret1.pumHotWat.eff.getArrayAsString(array((ret1.pumHotWat.eff.per.pressure.dp[i + 1] - ret1.pumHotWat.eff.per.pressure.dp[i]) / (ret1.pumHotWat.eff.per.pressure.V_flow[i + 1] - ret1.pumHotWat.eff.per.pressure.V_flow[i]) for i in 1:1), "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-ret1.pumHea.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3Clusters.ret1.pumHea.eff.getArrayAsString(array((ret1.pumHea.eff.per.pressure.dp[i + 1] - ret1.pumHea.eff.per.pressure.dp[i]) / (ret1.pumHea.eff.per.pressure.V_flow[i + 1] - ret1.pumHea.eff.per.pressure.V_flow[i]) for i in 1:1), "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff1.pumChi.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3Clusters.larOff1.pumChi.eff.getArrayAsString(array((larOff1.pumChi.eff.per.pressure.dp[i + 1] - larOff1.pumChi.eff.per.pressure.dp[i]) / (larOff1.pumChi.eff.per.pressure.V_flow[i + 1] - larOff1.pumChi.eff.per.pressure.V_flow[i]) for i in 1:1), "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff1.pumHotWat.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3Clusters.larOff1.pumHotWat.eff.getArrayAsString(array((larOff1.pumHotWat.eff.per.pressure.dp[i + 1] - larOff1.pumHotWat.eff.per.pressure.dp[i]) / (larOff1.pumHotWat.eff.per.pressure.V_flow[i + 1] - larOff1.pumHotWat.eff.per.pressure.V_flow[i]) for i in 1:1), "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff1.pumHea.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3Clusters.larOff1.pumHea.eff.getArrayAsString(array((larOff1.pumHea.eff.per.pressure.dp[i + 1] - larOff1.pumHea.eff.per.pressure.dp[i]) / (larOff1.pumHea.eff.per.pressure.V_flow[i + 1] - larOff1.pumHea.eff.per.pressure.V_flow[i]) for i in 1:1), "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. Notification: Performance of preOpt simplifyIfEquations (simulation): time 0.03683/20.05, allocations: 8.604 MB / 4.597 GB, free: 76.1 MB / 2.073 GB Notification: Performance of preOpt expandDerOperator (simulation): time 0.02619/20.07, allocations: 4.826 MB / 4.601 GB, free: 76.08 MB / 2.073 GB Notification: Performance of preOpt clockPartitioning (simulation): time 0.2727/20.35, allocations: 60.58 MB / 4.66 GB, free: 68.51 MB / 2.073 GB Notification: Performance of preOpt findStateOrder (simulation): time 0.00392/20.35, allocations: 125.3 kB / 4.661 GB, free: 68.5 MB / 2.073 GB Notification: Performance of preOpt replaceEdgeChange (simulation): time 0.02357/20.37, allocations: 1.939 MB / 4.663 GB, free: 68.5 MB / 2.073 GB Notification: Performance of preOpt inlineArrayEqn (simulation): time 0.002438/20.38, allocations: 1.672 MB / 4.664 GB, free: 68.41 MB / 2.073 GB Notification: Performance of preOpt removeEqualRHS (simulation): time 0.3169/20.69, allocations: 53.19 MB / 4.716 GB, free: 64.25 MB / 2.073 GB Warning: The model contains alias variables with redundant start and/or conflicting nominal values. It is recommended to resolve the conflicts, because otherwise the system could be hard to solve. To print the conflicting alias sets and the chosen candidates please use -d=aliasConflicts. Notification: Performance of preOpt removeSimpleEquations (simulation): time 0.7705/21.46, allocations: 314.9 MB / 5.024 GB, free: 11.07 MB / 2.261 GB Notification: Performance of preOpt comSubExp (simulation): time 0.2093/21.67, allocations: 45.99 MB / 5.069 GB, free: 12.05 MB / 2.292 GB Warning: The model contains alias variables with redundant start and/or conflicting nominal values. It is recommended to resolve the conflicts, because otherwise the system could be hard to solve. To print the conflicting alias sets and the chosen candidates please use -d=aliasConflicts. Notification: Performance of preOpt evalFunc (simulation): time 0.2795/21.95, allocations: 83.21 MB / 5.15 GB, free: 15.02 MB / 2.354 GB Notification: Performance of preOpt encapsulateWhenConditions (simulation): time 0.1398/22.09, allocations: 20.71 MB / 5.17 GB, free: 220 kB / 2.354 GB Notification: Performance of preOpt simplifyInStream (simulation): time 0.06759/22.16, allocations: 3.843 MB / 5.174 GB, free: 13.07 MB / 2.37 GB Notification: Performance of pre-optimization done (n=2506): time 0.000151/22.16, allocations: 0 / 5.174 GB, free: 13.07 MB / 2.37 GB Notification: Performance of matching and sorting (n=2516): time 2.555/24.71, allocations: 345.4 MB / 5.511 GB, free: 1.322 GB / 2.464 GB Notification: Performance of inlineWhenForInitialization (initialization): time 0.0006269/24.72, allocations: 1.688 MB / 5.513 GB, free: 1.32 GB / 2.464 GB [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/Fluid/Actuators/BaseClasses/ValveParameters.mo:29:3-35:74:writable] Warning: Parameter bayWatHex.valHea.res3.dpValve_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=0.0) as default value. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/Fluid/Interfaces/PartialTwoPortInterface.mo:8:3-10:52:writable] Warning: Parameter bayWatHex.valHea.res3.m_flow_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=0.0) as default value. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/Fluid/Actuators/BaseClasses/ValveParameters.mo:29:3-35:74:writable] Warning: Parameter bayWatHex.valHea.res1.dpValve_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=0.0) as default value. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/Fluid/Interfaces/PartialTwoPortInterface.mo:8:3-10:52:writable] Warning: Parameter bayWatHex.valHea.res1.m_flow_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=0.0) as default value. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/Fluid/Actuators/BaseClasses/ValveParameters.mo:29:3-35:74:writable] Warning: Parameter bayWatHex.valCoo.res3.dpValve_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=0.0) as default value. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/Fluid/Interfaces/PartialTwoPortInterface.mo:8:3-10:52:writable] Warning: Parameter bayWatHex.valCoo.res3.m_flow_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=0.0) as default value. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/Fluid/Actuators/BaseClasses/ValveParameters.mo:29:3-35:74:writable] Warning: Parameter bayWatHex.valCoo.res1.dpValve_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=0.0) as default value. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/Fluid/Interfaces/PartialTwoPortInterface.mo:8:3-10:52:writable] Warning: Parameter bayWatHex.valCoo.res1.m_flow_nominal has no value, and is fixed during initialization (fixed=true), using available start value (start=0.0) as default value. Notification: Performance of selectInitializationVariablesDAE (initialization): time 0.1843/24.9, allocations: 58.45 MB / 5.57 GB, free: 1.311 GB / 2.464 GB Notification: Performance of collectPreVariables (initialization): time 0.01221/24.91, allocations: 0.6572 MB / 5.57 GB, free: 1.31 GB / 2.464 GB Notification: Performance of collectInitialEqns (initialization): time 0.05331/24.97, allocations: 36.22 MB / 5.606 GB, free: 1.284 GB / 2.464 GB Notification: Performance of collectInitialBindings (initialization): time 0.01846/24.98, allocations: 8.727 MB / 5.614 GB, free: 1.278 GB / 2.464 GB Notification: Performance of simplifyInitialFunctions (initialization): time 0.01055/24.99, allocations: 0.6814 MB / 5.615 GB, free: 1.277 GB / 2.464 GB Notification: Performance of setup shared object (initialization): time 7.265e-05/24.99, allocations: 309.1 kB / 5.615 GB, free: 1.277 GB / 2.464 GB Notification: Performance of preBalanceInitialSystem (initialization): time 0.08863/25.08, allocations: 18.87 MB / 5.634 GB, free: 1.271 GB / 2.464 GB Notification: Performance of partitionIndependentBlocks (initialization): time 0.1017/25.18, allocations: 32.39 MB / 5.665 GB, free: 1.249 GB / 2.464 GB Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: pla.coo.con.vol.dynBal.medium.p = pla.coo.con.vol.dynBal.p_start (pla.sinCoo.p = pla.coo.con.vol.dynBal.p_start) Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: pla.hea.eva.vol.dynBal.medium.p = pla.hea.eva.vol.dynBal.p_start (pla.sinHea.p = pla.hea.eva.vol.dynBal.p_start) Notification: Performance of analyzeInitialSystem (initialization): time 0.5724/25.76, allocations: 90.54 MB / 5.754 GB, free: 1.228 GB / 2.464 GB Notification: Performance of solveInitialSystemEqSystem (initialization): time 0.0003417/25.76, allocations: 87.34 kB / 5.754 GB, free: 1.228 GB / 2.464 GB Error: Internal error IndexReduction.pantelidesIndexReduction failed! System is structurally singular and cannot be handled because the number of unassigned equations is larger than the number of states. Use -d=bltdump to get more information. Error: No system for the symbolic initialization was generated