startTime=0
stopTime=3600
tolerance=1e-06
numberOfIntervals=2500
stepSize=1.44
Regular simulation: ./Buildings_1.6_Buildings.Fluid.HeatExchangers.Boreholes.BaseClasses.Examples.HexInternalElement -abortSlowSimulation -alarm=480 -lv LOG_STATS
assert | error | Maximum number of iterations exceeded. Check the borehole geometry.
| | | | The tubes may be too close to the borehole wall.
| | | | Input to the function
| | | | Buildings.Fluid.HeatExchangers.Boreholes.BaseClasses.singleUTubeResistances
| | | | is
| | | | hSeg = 20 m
| | | | rBor = 0.1 m
| | | | rTub = 0.02 m
| | | | eTub = 0.002 m
| | | | xC = 0.025 m
| | | | kSoi = 2.8 W/m/K
| | | | kFil = 1.15 W/m/K
| | | | kTub = 0.5 W/m/K
| | | | Computed x = 0.0495154 K/W
| | | | Rgb = nan K/W
| | | | Rgg = nan K/W
assert | error | Failed to solve the initialization problem with global homotopy with equidistant step size.
assert | debug | Unable to solve initialization problem.
assert | info | simulation terminated by an assertion at initialization