Running: ./testmodel.py --libraries=/home/hudson/saved_omc/libraries/.openmodelica/libraries --ompython_omhome=/usr BuildingSystems_BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DViewFactorsFlexGeo.conf.json loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.1.0+maint.om/package.mo", uses=false) [Timeout 180] "Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.1.0+maint.om/package.mo): time 0.0006042/0.0006042, allocations: 72.19 kB / 9.903 MB, free: 0.7852 MB / 10.45 MB Notification: Performance of NFInstanceAPI.mkTop(): time 0.000894/0.001498, allocations: 435.8 kB / 10.33 MB, free: 368 kB / 10.45 MB " [Timeout remaining time 180] loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.1.0+maint.om/package.mo", uses=false) [Timeout 180] "Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.1.0+maint.om/package.mo): time 0.0006855/0.0006855, allocations: 161.1 kB / 11.23 MB, free: 2.941 MB / 13.93 MB Notification: Performance of NFInstanceAPI.mkTop(): time 0.0008267/0.001512, allocations: 463.6 kB / 11.68 MB, free: 2.484 MB / 13.93 MB " [Timeout remaining time 180] loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.1.0+maint.om/package.mo", uses=false) [Timeout 180] "Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.1.0+maint.om/package.mo): time 0.9088/0.9088, allocations: 177.2 MB / 189.6 MB, free: 5.312 MB / 186.7 MB Notification: Performance of NFInstanceAPI.mkTop(): time 0.07539/0.9842, allocations: 53.66 MB / 243.2 MB, free: 15.58 MB / 250.7 MB " [Timeout remaining time 179] loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/NcDataReader2 2.5.1-master/package.mo", uses=false) [Timeout 180] "Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/NcDataReader2 2.5.1-master/package.mo): time 0.001228/0.001228, allocations: 238.5 kB / 244.2 MB, free: 14.64 MB / 250.7 MB Notification: Performance of NFInstanceAPI.mkTop(): time 0.0008655/0.002094, allocations: 475 kB / 244.7 MB, free: 14.18 MB / 250.7 MB " [Timeout remaining time 180] loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/package.mo", uses=false) [Timeout 180] "Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/package.mo): time 0.6507/0.6507, allocations: 138.7 MB / 384.1 MB, free: 0.4961 MB / 362.7 MB Notification: Performance of NFInstanceAPI.mkTop(): time 0.06523/0.716, allocations: 42.4 MB / 426.5 MB, free: 5.953 MB / 410.7 MB " [Timeout remaining time 179] Using package BuildingSystems with version 2.0.0-beta (/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/package.mo) Using package NcDataReader2 with version 2.5.1 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/NcDataReader2 2.5.1-master/package.mo) Using package Modelica with version 4.1.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.1.0+maint.om/package.mo) Using package Complex with version 4.1.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.1.0+maint.om/package.mo) Using package ModelicaServices with version 4.1.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.1.0+maint.om/package.mo) Running command: translateModel(BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DViewFactorsFlexGeo,tolerance=1e-06,outputFormat="empty",numberOfIntervals=2500,variableFilter="",fileNamePrefix="BuildingSystems_BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DViewFactorsFlexGeo") translateModel(BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DViewFactorsFlexGeo,tolerance=1e-06,outputFormat="empty",numberOfIntervals=2500,variableFilter="",fileNamePrefix="BuildingSystems_BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DViewFactorsFlexGeo") [Timeout 660] "Notification: Performance of FrontEnd - loaded program: time 1.323e-06/1.323e-06, allocations: 0 / 427.8 MB, free: 4.617 MB / 410.7 MB Notification: Performance of FrontEnd - Absyn->SCode: time 1.034e-05/1.166e-05, allocations: 2.312 kB / 427.8 MB, free: 4.613 MB / 410.7 MB Notification: Performance of NFInst.instantiate(BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DViewFactorsFlexGeo): time 0.3109/0.3109, allocations: 171.9 MB / 0.5857 GB, free: 4.578 MB / 0.5573 GB Notification: Performance of NFInst.instExpressions: time 0.02043/0.3313, allocations: 14.17 MB / 0.5995 GB, free: 6.41 MB / 0.573 GB Notification: Performance of NFInst.updateImplicitVariability: time 0.003697/0.335, allocations: 170.8 kB / 0.5997 GB, free: 6.242 MB / 0.573 GB [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/BaseClasses/ConstructionGeneral.mo:4:3-26:121:writable] Warning: Connector toSurfacePort_1 is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/BaseClasses/ConstructionGeneral.mo:27:3-50:117:writable] Warning: Connector toSurfacePort_2 is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Climate/Sources/RadiationFixed.mo:4:3-10:117:writable] Warning: Connector radiationPort is not balanced: The number of potential variables (5) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/BaseClasses/ConstructionGeneral.mo:4:3-26:121:writable] Warning: Connector toSurfacePort_1 is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/BaseClasses/ConstructionGeneral.mo:27:3-50:117:writable] Warning: Connector toSurfacePort_2 is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Climate/Sources/RadiationFixed.mo:4:3-10:117:writable] Warning: Connector radiationPort is not balanced: The number of potential variables (5) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/BaseClasses/ConstructionGeneral.mo:4:3-26:121:writable] Warning: Connector toSurfacePort_1 is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/BaseClasses/ConstructionGeneral.mo:27:3-50:117:writable] Warning: Connector toSurfacePort_2 is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Climate/Sources/RadiationFixed.mo:4:3-10:117:writable] Warning: Connector radiationPort is not balanced: The number of potential variables (5) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/BaseClasses/ConstructionGeneral.mo:4:3-26:121:writable] Warning: Connector toSurfacePort_1 is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/BaseClasses/ConstructionGeneral.mo:27:3-50:117:writable] Warning: Connector toSurfacePort_2 is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Climate/Sources/RadiationFixed.mo:4:3-10:117:writable] Warning: Connector radiationPort is not balanced: The number of potential variables (5) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/Ambience.mo:52:3-55:54:writable] Warning: Connector toAirPorts is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/Ambience.mo:56:3-59:53:writable] Warning: Connector toSurfacePorts is not balanced: The number of potential variables (6) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Climate/SolarRadiationTransformers/SolarRadiationTransformerGeneral.mo:25:3-27:116:writable] Warning: Connector radiationPort is not balanced: The number of potential variables (5) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/BaseClasses/ZoneTemplateGeneral.mo:63:3-67:55:writable] Warning: Connector toConstructionPorts is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/BaseClasses/RadiationDistribution.mo:13:3-15:72:writable] Warning: Connector toSurfacePorts is not balanced: The number of potential variables (6) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/BaseClasses/SurfaceGeneral.mo:4:3-6:117:writable] Warning: Connector toConstructionPort is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/Surfaces/SurfaceToAir.mo:5:3-7:118:writable] Warning: Connector toAirPort is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/Surfaces/SurfaceToAir.mo:8:3-12:115:writable] Warning: Connector toSurfacesPort is not balanced: The number of potential variables (6) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/Surfaces/SurfacesToAir.mo:9:3-12:23:writable] Warning: Connector toConstructionPorts is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/Surfaces/SurfacesToAir.mo:13:3-16:23:writable] Warning: Connector toSurfacesPorts is not balanced: The number of potential variables (6) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/Surfaces/SurfacesToAir.mo:17:3-19:113:writable] Warning: Connector toAirPorts is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/BaseClasses/AirvolumeGeneral.mo:40:3-41:97:writable] Warning: Connector toSurfacePorts is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/BaseClasses/SurfaceGeneral.mo:4:3-6:117:writable] Warning: Connector toConstructionPort is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/Surfaces/SurfaceToAir.mo:5:3-7:118:writable] Warning: Connector toAirPort is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/Surfaces/SurfaceToAir.mo:8:3-12:115:writable] Warning: Connector toSurfacesPort is not balanced: The number of potential variables (6) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/BaseClasses/SurfaceGeneral.mo:4:3-6:117:writable] Warning: Connector toConstructionPort is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/Surfaces/SurfaceToAir.mo:5:3-7:118:writable] Warning: Connector toAirPort is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/Surfaces/SurfaceToAir.mo:8:3-12:115:writable] Warning: Connector toSurfacesPort is not balanced: The number of potential variables (6) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/BaseClasses/SurfaceGeneral.mo:4:3-6:117:writable] Warning: Connector toConstructionPort is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/Surfaces/SurfaceToAir.mo:5:3-7:118:writable] Warning: Connector toAirPort is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/Surfaces/SurfaceToAir.mo:8:3-12:115:writable] Warning: Connector toSurfacesPort is not balanced: The number of potential variables (6) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/BaseClasses/SurfaceGeneral.mo:4:3-6:117:writable] Warning: Connector toConstructionPort is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/Surfaces/SurfaceToAir.mo:5:3-7:118:writable] Warning: Connector toAirPort is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/Surfaces/SurfaceToAir.mo:8:3-12:115:writable] Warning: Connector toSurfacesPort is not balanced: The number of potential variables (6) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/BaseClasses/ConstructionGeneral.mo:4:3-26:121:writable] Warning: Connector toSurfacePort_1 is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/BaseClasses/ConstructionGeneral.mo:27:3-50:117:writable] Warning: Connector toSurfacePort_2 is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Climate/Sources/RadiationFixed.mo:4:3-10:117:writable] Warning: Connector radiationPort is not balanced: The number of potential variables (5) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/BaseClasses/SurfaceGeneral.mo:4:3-6:117:writable] Warning: Connector toConstructionPort is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/Surfaces/SurfaceToAir.mo:5:3-7:118:writable] Warning: Connector toAirPort is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/Surfaces/SurfaceToAir.mo:8:3-12:115:writable] Warning: Connector toSurfacesPort is not balanced: The number of potential variables (6) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/BaseClasses/ConstructionGeneral.mo:4:3-26:121:writable] Warning: Connector toSurfacePort_1 is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/BaseClasses/ConstructionGeneral.mo:27:3-50:117:writable] Warning: Connector toSurfacePort_2 is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Climate/Sources/RadiationFixed.mo:4:3-10:117:writable] Warning: Connector radiationPort is not balanced: The number of potential variables (5) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/BaseClasses/SurfaceGeneral.mo:4:3-6:117:writable] Warning: Connector toConstructionPort is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/Surfaces/SurfaceToAir.mo:5:3-7:118:writable] Warning: Connector toAirPort is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/Surfaces/SurfaceToAir.mo:8:3-12:115:writable] Warning: Connector toSurfacesPort is not balanced: The number of potential variables (6) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] Notification: Performance of NFTyping.typeComponents: time 0.002625/0.3376, allocations: 1.62 MB / 0.6013 GB, free: 4.637 MB / 0.573 GB Notification: Performance of NFTyping.typeBindings: time 0.007131/0.3448, allocations: 4.321 MB / 0.6055 GB, free: 300 kB / 0.573 GB Notification: Performance of NFTyping.typeClassSections: time 0.004173/0.3489, allocations: 2.601 MB / 0.608 GB, free: 13.69 MB / 0.5886 GB Notification: Performance of NFFlatten.flatten: time 0.01236/0.3613, allocations: 16.53 MB / 0.6242 GB, free: 13.12 MB / 0.6042 GB Notification: Performance of NFFlatten.resolveConnections: time 0.01093/0.3722, allocations: 10.7 MB / 0.6346 GB, free: 2.312 MB / 0.6042 GB Notification: Performance of NFEvalConstants.evaluate: time 0.01158/0.3838, allocations: 11.29 MB / 0.6456 GB, free: 7.004 MB / 0.6198 GB Notification: Performance of NFSimplifyModel.simplify: time 0.2425/0.6263, allocations: 7.262 MB / 0.6527 GB, free: 25.3 MB / 0.6198 GB Notification: Performance of NFPackage.collectConstants: time 0.004951/0.6312, allocations: 1.76 MB / 0.6545 GB, free: 25.3 MB / 0.6198 GB Notification: Performance of NFFlatten.collectFunctions: time 0.00814/0.6394, allocations: 3.655 MB / 0.658 GB, free: 25.29 MB / 0.6198 GB Notification: Performance of NFScalarize.scalarize: time 0.00364/0.643, allocations: 3.666 MB / 0.6616 GB, free: 25.29 MB / 0.6198 GB Notification: Performance of NFVerifyModel.verify: time 0.007986/0.651, allocations: 4.328 MB / 0.6658 GB, free: 25.29 MB / 0.6198 GB Notification: Performance of NFConvertDAE.convert: time 0.01287/0.6639, allocations: 13.02 MB / 0.6785 GB, free: 24.19 MB / 0.6198 GB Notification: Performance of FrontEnd - DAE generated: time 1.497e-05/0.6639, allocations: 0.7188 kB / 0.6785 GB, free: 24.19 MB / 0.6198 GB Notification: Performance of FrontEnd: time 1.062e-06/0.6639, allocations: 0 / 0.6785 GB, free: 24.19 MB / 0.6198 GB Notification: Performance of Transformations before backend: time 0.0005816/0.6645, allocations: 0.5 kB / 0.6785 GB, free: 24.19 MB / 0.6198 GB Notification: Model statistics after passing the front-end and creating the data structures used by the back-end: * Number of equations: 3226 * Number of variables: 3226 Notification: Performance of Generate backend data structure: time 0.02115/0.6856, allocations: 15.65 MB / 0.6938 GB, free: 19.11 MB / 0.6198 GB Notification: Performance of prepare preOptimizeDAE: time 3.352e-05/0.6856, allocations: 9.812 kB / 0.6938 GB, free: 19.11 MB / 0.6198 GB Notification: Performance of preOpt normalInlineFunction (simulation): time 0.005446/0.6911, allocations: 2.434 MB / 0.6962 GB, free: 18.98 MB / 0.6198 GB Notification: Performance of preOpt evaluateParameters (simulation): time 0.007367/0.6985, allocations: 3.808 MB / 0.6999 GB, free: 17.77 MB / 0.6198 GB Notification: Performance of preOpt simplifyIfEquations (simulation): time 0.0007623/0.6992, allocations: 1.834 MB / 0.7017 GB, free: 16.62 MB / 0.6198 GB Notification: Performance of preOpt expandDerOperator (simulation): time 0.001374/0.7006, allocations: 1.171 MB / 0.7029 GB, free: 16.61 MB / 0.6198 GB Notification: Performance of preOpt clockPartitioning (simulation): time 0.03113/0.7317, allocations: 11.19 MB / 0.7138 GB, free: 14.87 MB / 0.6198 GB Notification: Performance of preOpt findStateOrder (simulation): time 0.0001965/0.7319, allocations: 19.17 kB / 0.7138 GB, free: 14.87 MB / 0.6198 GB Notification: Performance of preOpt replaceEdgeChange (simulation): time 0.003905/0.7358, allocations: 491.9 kB / 0.7143 GB, free: 14.87 MB / 0.6198 GB Notification: Performance of preOpt inlineArrayEqn (simulation): time 0.0007267/0.7366, allocations: 0.6548 MB / 0.7149 GB, free: 14.85 MB / 0.6198 GB Notification: Performance of preOpt removeEqualRHS (simulation): time 0.01928/0.7558, allocations: 7.296 MB / 0.7221 GB, free: 14.55 MB / 0.6198 GB Warning: The model contains alias variables with redundant start and/or conflicting nominal values. It is recommended to resolve the conflicts, because otherwise the system could be hard to solve. To print the conflicting alias sets and the chosen candidates please use -d=aliasConflicts. Notification: Performance of preOpt removeSimpleEquations (simulation): time 0.0473/0.8031, allocations: 36.01 MB / 0.7572 GB, free: 8.961 MB / 0.6355 GB Notification: Performance of preOpt comSubExp (simulation): time 0.00641/0.8095, allocations: 3.79 MB / 0.7609 GB, free: 6.371 MB / 0.6355 GB Notification: Performance of preOpt resolveLoops (simulation): time 0.001669/0.8112, allocations: 1.076 MB / 0.762 GB, free: 5.539 MB / 0.6355 GB Notification: Performance of preOpt evalFunc (simulation): time 0.001701/0.8129, allocations: 1.678 MB / 0.7636 GB, free: 4.363 MB / 0.6355 GB Notification: Performance of preOpt encapsulateWhenConditions (simulation): time 0.00272/0.8156, allocations: 2.595 MB / 0.7661 GB, free: 2.094 MB / 0.6355 GB Notification: Performance of pre-optimization done (n=488): time 6.683e-06/0.8156, allocations: 4 kB / 0.7661 GB, free: 2.09 MB / 0.6355 GB Notification: Performance of matching and sorting (n=488): time 0.01231/0.828, allocations: 5.532 MB / 0.7715 GB, free: 12.89 MB / 0.6511 GB Notification: Performance of inlineWhenForInitialization (initialization): time 0.0002197/0.8282, allocations: 0.5154 MB / 0.7721 GB, free: 12.27 MB / 0.6511 GB Notification: Performance of selectInitializationVariablesDAE (initialization): time 0.002739/0.8309, allocations: 3.316 MB / 0.7753 GB, free: 9.688 MB / 0.6511 GB Notification: Performance of collectPreVariables (initialization): time 0.0004635/0.8314, allocations: 120.2 kB / 0.7754 GB, free: 9.629 MB / 0.6511 GB Notification: Performance of collectInitialEqns (initialization): time 0.002499/0.8339, allocations: 4.454 MB / 0.7798 GB, free: 5.699 MB / 0.6511 GB Notification: Performance of collectInitialBindings (initialization): time 0.001206/0.8351, allocations: 1.742 MB / 0.7815 GB, free: 4.227 MB / 0.6511 GB Notification: Performance of simplifyInitialFunctions (initialization): time 0.001933/0.837, allocations: 1.402 MB / 0.7828 GB, free: 3.281 MB / 0.6511 GB Notification: Performance of setup shared object (initialization): time 5.736e-05/0.8371, allocations: 310 kB / 0.7831 GB, free: 2.977 MB / 0.6511 GB Notification: Performance of preBalanceInitialSystem (initialization): time 0.002528/0.8396, allocations: 1.901 MB / 0.785 GB, free: 1.203 MB / 0.6511 GB Notification: Performance of partitionIndependentBlocks (initialization): time 0.003022/0.8426, allocations: 3.343 MB / 0.7882 GB, free: 13.47 MB / 0.6667 GB Notification: Performance of analyzeInitialSystem (initialization): time 0.00748/0.8501, allocations: 6.89 MB / 0.795 GB, free: 6.453 MB / 0.6667 GB Notification: Performance of solveInitialSystemEqSystem (initialization): time 2.189e-05/0.8501, allocations: 16 kB / 0.795 GB, free: 6.438 MB / 0.6667 GB Notification: Performance of matching and sorting (n=828) (initialization): time 0.00887/0.859, allocations: 6.383 MB / 0.8012 GB, free: 376 kB / 0.6667 GB Notification: Performance of prepare postOptimizeDAE: time 0.0002952/0.8593, allocations: 0.5395 MB / 0.8017 GB, free: 15.75 MB / 0.6823 GB Notification: Performance of postOpt simplifyComplexFunction (initialization): time 3.928e-05/0.8593, allocations: 44 kB / 0.8018 GB, free: 15.71 MB / 0.6823 GB Notification: Performance of postOpt tearingSystem (initialization): time 0.003515/0.8628, allocations: 1.411 MB / 0.8032 GB, free: 14.27 MB / 0.6823 GB Notification: Performance of postOpt solveSimpleEquations (initialization): time 0.006028/0.8689, allocations: 2.698 MB / 0.8058 GB, free: 11.65 MB / 0.6823 GB Notification: Performance of postOpt calculateStrongComponentJacobians (initialization): time 0.0117/0.8806, allocations: 25 MB / 0.8302 GB, free: 1.438 MB / 0.698 GB Notification: Performance of postOpt simplifyAllExpressions (initialization): time 0.00314/0.8837, allocations: 0.6788 MB / 0.8309 GB, free: 0.7539 MB / 0.698 GB Notification: Performance of postOpt collapseArrayExpressions (initialization): time 0.0009648/0.8847, allocations: 0.8122 MB / 0.8317 GB, free: 15.94 MB / 0.7136 GB Warning: Assuming fixed start value for the following 25 variables: wall1.construction.layer[1].T[1]:VARIABLE(min = 0.0 start = wall1.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] wall1.construction.layer[1].T[2]:VARIABLE(min = 0.0 start = wall1.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] wall1.construction.layer[2].T[1]:VARIABLE(min = 0.0 start = wall1.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] wall1.construction.layer[2].T[2]:VARIABLE(min = 0.0 start = wall1.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] wall2.construction.layer[1].T[1]:VARIABLE(min = 0.0 start = wall2.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] wall2.construction.layer[1].T[2]:VARIABLE(min = 0.0 start = wall2.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] wall2.construction.layer[2].T[1]:VARIABLE(min = 0.0 start = wall2.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] wall2.construction.layer[2].T[2]:VARIABLE(min = 0.0 start = wall2.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] wall3.construction.layer[1].T[1]:VARIABLE(min = 0.0 start = wall3.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] wall3.construction.layer[1].T[2]:VARIABLE(min = 0.0 start = wall3.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] wall3.construction.layer[2].T[1]:VARIABLE(min = 0.0 start = wall3.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] wall3.construction.layer[2].T[2]:VARIABLE(min = 0.0 start = wall3.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] wall4.construction.layer[1].T[1]:VARIABLE(min = 0.0 start = wall4.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] wall4.construction.layer[1].T[2]:VARIABLE(min = 0.0 start = wall4.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] wall4.construction.layer[2].T[1]:VARIABLE(min = 0.0 start = wall4.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] wall4.construction.layer[2].T[2]:VARIABLE(min = 0.0 start = wall4.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] zone.airvolume.mH2OLiq:VARIABLE(min = 0.0 start = 0.0 unit = \"kg\" fixed = true protected = true ) \"Liquid water mass\" type: Real ceiling.construction.layer[1].T[1]:VARIABLE(min = 0.0 start = ceiling.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] ceiling.construction.layer[1].T[2]:VARIABLE(min = 0.0 start = ceiling.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] ceiling.construction.layer[2].T[1]:VARIABLE(min = 0.0 start = ceiling.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] ceiling.construction.layer[2].T[2]:VARIABLE(min = 0.0 start = ceiling.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] floor.construction.layer[1].T[1]:VARIABLE(min = 0.0 start = floor.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] floor.construction.layer[1].T[2]:VARIABLE(min = 0.0 start = floor.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] floor.construction.layer[2].T[1]:VARIABLE(min = 0.0 start = floor.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] floor.construction.layer[2].T[2]:VARIABLE(min = 0.0 start = floor.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] Notification: Performance of preBalanceInitialSystem (initialization_lambda0): time 0.004771/0.8895, allocations: 2.298 MB / 0.8339 GB, free: 13.59 MB / 0.7136 GB Notification: Performance of partitionIndependentBlocks (initialization_lambda0): time 0.002868/0.8923, allocations: 3.339 MB / 0.8372 GB, free: 9.703 MB / 0.7136 GB Notification: Performance of analyzeInitialSystem (initialization_lambda0): time 0.007307/0.8996, allocations: 6.848 MB / 0.8439 GB, free: 2.305 MB / 0.7136 GB Notification: Performance of solveInitialSystemEqSystem (initialization_lambda0): time 1.767e-05/0.8996, allocations: 12 kB / 0.8439 GB, free: 2.293 MB / 0.7136 GB Notification: Performance of matching and sorting (n=828) (initialization_lambda0): time 0.008698/0.9083, allocations: 6.371 MB / 0.8501 GB, free: 11.91 MB / 0.7292 GB Notification: Performance of prepare postOptimizeDAE: time 0.0002627/0.9086, allocations: 0.5392 MB / 0.8506 GB, free: 11.3 MB / 0.7292 GB Notification: Performance of postOpt simplifyComplexFunction (initialization): time 3.331e-05/0.9086, allocations: 40 kB / 0.8507 GB, free: 11.26 MB / 0.7292 GB Notification: Performance of postOpt tearingSystem (initialization): time 0.003372/0.912, allocations: 1.407 MB / 0.852 GB, free: 9.812 MB / 0.7292 GB Notification: Performance of postOpt solveSimpleEquations (initialization): time 0.006014/0.918, allocations: 2.699 MB / 0.8547 GB, free: 7.195 MB / 0.7292 GB Notification: Performance of postOpt calculateStrongComponentJacobians (initialization): time 0.01175/0.9298, allocations: 25 MB / 0.8791 GB, free: 12.98 MB / 0.7605 GB Notification: Performance of postOpt simplifyAllExpressions (initialization): time 0.003212/0.933, allocations: 0.5624 MB / 0.8796 GB, free: 12.42 MB / 0.7605 GB Notification: Performance of postOpt collapseArrayExpressions (initialization): time 0.0009743/0.934, allocations: 0.8121 MB / 0.8804 GB, free: 11.61 MB / 0.7605 GB Warning: Assuming fixed start value for the following 25 variables: wall1.construction.layer[1].T[1]:VARIABLE(min = 0.0 start = wall1.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] wall1.construction.layer[1].T[2]:VARIABLE(min = 0.0 start = wall1.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] wall1.construction.layer[2].T[1]:VARIABLE(min = 0.0 start = wall1.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] wall1.construction.layer[2].T[2]:VARIABLE(min = 0.0 start = wall1.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] wall2.construction.layer[1].T[1]:VARIABLE(min = 0.0 start = wall2.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] wall2.construction.layer[1].T[2]:VARIABLE(min = 0.0 start = wall2.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] wall2.construction.layer[2].T[1]:VARIABLE(min = 0.0 start = wall2.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] wall2.construction.layer[2].T[2]:VARIABLE(min = 0.0 start = wall2.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] wall3.construction.layer[1].T[1]:VARIABLE(min = 0.0 start = wall3.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] wall3.construction.layer[1].T[2]:VARIABLE(min = 0.0 start = wall3.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] wall3.construction.layer[2].T[1]:VARIABLE(min = 0.0 start = wall3.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] wall3.construction.layer[2].T[2]:VARIABLE(min = 0.0 start = wall3.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] wall4.construction.layer[1].T[1]:VARIABLE(min = 0.0 start = wall4.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] wall4.construction.layer[1].T[2]:VARIABLE(min = 0.0 start = wall4.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] wall4.construction.layer[2].T[1]:VARIABLE(min = 0.0 start = wall4.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] wall4.construction.layer[2].T[2]:VARIABLE(min = 0.0 start = wall4.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] zone.airvolume.mH2OLiq:VARIABLE(min = 0.0 start = 0.0 unit = \"kg\" fixed = true protected = true ) \"Liquid water mass\" type: Real ceiling.construction.layer[1].T[1]:VARIABLE(min = 0.0 start = ceiling.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] ceiling.construction.layer[1].T[2]:VARIABLE(min = 0.0 start = ceiling.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] ceiling.construction.layer[2].T[1]:VARIABLE(min = 0.0 start = ceiling.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] ceiling.construction.layer[2].T[2]:VARIABLE(min = 0.0 start = ceiling.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] floor.construction.layer[1].T[1]:VARIABLE(min = 0.0 start = floor.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] floor.construction.layer[1].T[2]:VARIABLE(min = 0.0 start = floor.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] floor.construction.layer[2].T[1]:VARIABLE(min = 0.0 start = floor.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] floor.construction.layer[2].T[2]:VARIABLE(min = 0.0 start = floor.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] Notification: Model statistics after passing the back-end for initialization: * Number of independent subsystems: 184 * Number of states: 0 () * Number of discrete variables: 11 (zone.heatingLoad.I.local_reset,zone.coolingLoad.I.local_reset,ambience.radiation[6].outsidePolarCircle,ambience.radiation[5].outsidePolarCircle,ambience.radiation[4].outsidePolarCircle,ambience.radiation[3].outsidePolarCircle,ambience.radiation[2].outsidePolarCircle,ambience.radiation[1].outsidePolarCircle,ambience.weatherDataReader.weatherData.conTim.tNext,$PRE.ambience.weatherDataReader.weatherData.conTim.tNext,$whenCondition1) * Number of discrete states: 0 () * Number of clocked states: 0 () * Top-level inputs: 0 Notification: Strong component statistics for initialization (703): * Single equations (assignments): 666 * Array equations: 0 * Algorithm blocks: 12 * Record equations: 0 * When equations: 0 * If-equations: 0 * Equation systems (not torn): 12 * Torn equation systems: 13 * Mixed (continuous/discrete) equation systems: 0 Notification: Equation system details (not torn): * Constant Jacobian (size): 0 systems * Linear Jacobian (size,density): 0 systems * Non-linear Jacobian (size): 12 systems {1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1} * Without analytic Jacobian (size): 0 systems Notification: Torn system details for strict tearing set: * Linear torn systems (#iteration vars, #inner vars, density): 6 systems {(1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%)} * Non-linear torn systems (#iteration vars, #inner vars): 7 systems {(10,20), (1,3), (1,3), (1,3), (1,3), (1,3), (1,3)} Notification: Performance of prepare postOptimizeDAE: time 0.001699/0.9357, allocations: 0.7489 MB / 0.8812 GB, free: 10.95 MB / 0.7605 GB Notification: Performance of postOpt lateInlineFunction (simulation): time 0.0009362/0.9366, allocations: 462.6 kB / 0.8816 GB, free: 10.5 MB / 0.7605 GB Notification: Performance of postOpt wrapFunctionCalls (simulation): time 0.008843/0.9454, allocations: 5.244 MB / 0.8867 GB, free: 5.148 MB / 0.7605 GB Notification: Performance of postOpt inlineArrayEqn (simulation): time 3.461e-05/0.9455, allocations: 60 kB / 0.8868 GB, free: 5.09 MB / 0.7605 GB Notification: Performance of postOpt constantLinearSystem (simulation): time 2.222e-05/0.9455, allocations: 4 kB / 0.8868 GB, free: 5.086 MB / 0.7605 GB Notification: Performance of postOpt simplifysemiLinear (simulation): time 0.005997/0.9515, allocations: 3.201 MB / 0.8899 GB, free: 1.758 MB / 0.7605 GB Notification: Performance of postOpt removeSimpleEquations (simulation): time 0.01813/0.9696, allocations: 11.47 MB / 0.9011 GB, free: 6.867 MB / 0.7761 GB Notification: Performance of postOpt simplifyComplexFunction (simulation): time 9.518e-06/0.9696, allocations: 4.531 kB / 0.9011 GB, free: 6.863 MB / 0.7761 GB Notification: Performance of postOpt solveSimpleEquations (simulation): time 0.004155/0.9738, allocations: 1.718 MB / 0.9028 GB, free: 5.188 MB / 0.7761 GB Notification: Performance of postOpt removeConstants (simulation): time 0.002303/0.9761, allocations: 1.306 MB / 0.9041 GB, free: 3.879 MB / 0.7761 GB Notification: Performance of postOpt tearingSystem (simulation): time 0.004231/0.9803, allocations: 1.793 MB / 0.9058 GB, free: 2.016 MB / 0.7761 GB Notification: Performance of postOpt inputDerivativesUsed (simulation): time 0.0004361/0.9808, allocations: 231.7 kB / 0.906 GB, free: 1.789 MB / 0.7761 GB Notification: Performance of postOpt calculateStrongComponentJacobians (simulation): time 0.01155/0.9923, allocations: 24.04 MB / 0.9295 GB, free: 8.48 MB / 0.8073 GB Notification: Performance of postOpt calculateStateSetsJacobians (simulation): time 1.213e-05/0.9923, allocations: 7.094 kB / 0.9295 GB, free: 8.477 MB / 0.8073 GB Notification: Performance of postOpt symbolicJacobian (simulation): time 0.009746/1.002, allocations: 5.66 MB / 0.9351 GB, free: 2.633 MB / 0.8073 GB Notification: Performance of postOpt simplifyTimeIndepFuncCalls (simulation): time 0.001028/1.003, allocations: 132 kB / 0.9352 GB, free: 2.504 MB / 0.8073 GB Notification: Performance of postOpt simplifyAllExpressions (simulation): time 0.001827/1.005, allocations: 155.2 kB / 0.9353 GB, free: 2.355 MB / 0.8073 GB Notification: Performance of postOpt findZeroCrossings (simulation): time 0.0008232/1.006, allocations: 474.4 kB / 0.9358 GB, free: 1.891 MB / 0.8073 GB Notification: Performance of postOpt collapseArrayExpressions (simulation): time 0.0008021/1.007, allocations: 0.6208 MB / 0.9364 GB, free: 1.27 MB / 0.8073 GB Notification: Performance of sorting global known variables: time 0.2599/1.266, allocations: 1.676 MB / 0.938 GB, free: 200.1 MB / 0.8073 GB Notification: Performance of sort global known variables: time 2.1e-07/1.266, allocations: 4.031 kB / 0.938 GB, free: 200.1 MB / 0.8073 GB Notification: Performance of remove unused functions: time 0.01776/1.284, allocations: 6.946 MB / 0.9448 GB, free: 199.8 MB / 0.8073 GB Notification: Model statistics after passing the back-end for simulation: * Number of independent subsystems: 18 * Number of states: 30 (wall1.construction.layer[1].T[1],wall1.construction.layer[1].T[2],wall1.construction.layer[2].T[1],wall1.construction.layer[2].T[2],wall2.construction.layer[1].T[1],wall2.construction.layer[1].T[2],wall2.construction.layer[2].T[1],wall2.construction.layer[2].T[2],wall3.construction.layer[1].T[1],wall3.construction.layer[1].T[2],wall3.construction.layer[2].T[1],wall3.construction.layer[2].T[2],wall4.construction.layer[1].T[1],wall4.construction.layer[1].T[2],wall4.construction.layer[2].T[1],wall4.construction.layer[2].T[2],zone.airvolume.mH2OLiq,zone.airvolume.air.dynBal.U,zone.airvolume.air.dynBal.m,zone.airvolume.air.dynBal.mXi[1],zone.heatingLoad.I.y,zone.coolingLoad.I.y,ceiling.construction.layer[1].T[1],ceiling.construction.layer[1].T[2],ceiling.construction.layer[2].T[1],ceiling.construction.layer[2].T[2],floor.construction.layer[1].T[1],floor.construction.layer[1].T[2],floor.construction.layer[2].T[1],floor.construction.layer[2].T[2]) * Number of discrete variables: 2 ($whenCondition1,ambience.weatherDataReader.weatherData.conTim.tNext) * Number of discrete states: 1 (ambience.weatherDataReader.weatherData.conTim.tNext) * Number of clocked states: 0 () * Top-level inputs: 0 Notification: Strong component statistics for simulation (508): * Single equations (assignments): 482 * Array equations: 0 * Algorithm blocks: 0 * Record equations: 0 * When equations: 1 * If-equations: 0 * Equation systems (not torn): 0 * Torn equation systems: 25 * Mixed (continuous/discrete) equation systems: 0 Notification: Torn system details for strict tearing set: * Linear torn systems (#iteration vars, #inner vars, density): 6 systems {(1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%)} * Non-linear torn systems (#iteration vars, #inner vars): 19 systems {(10,20), (1,3), (1,1), (1,1), (1,3), (1,1), (1,1), (1,3), (1,1), (1,1), (1,3), (1,1), (1,1), (1,1), (1,1), (1,3), (1,3), (1,1), (1,1)} Notification: Performance of Backend phase and start with SimCode phase: time 0.003179/1.287, allocations: 1.21 MB / 0.946 GB, free: 199.6 MB / 0.8073 GB Notification: Performance of simCode: created initialization part: time 0.02798/1.315, allocations: 16.84 MB / 0.9624 GB, free: 194 MB / 0.8073 GB Notification: Performance of simCode: created event and clocks part: time 0.0002275/1.316, allocations: 112.3 kB / 0.9625 GB, free: 193.9 MB / 0.8073 GB Notification: Performance of simCode: created simulation system equations: time 0.004579/1.32, allocations: 3.778 MB / 0.9662 GB, free: 192.4 MB / 0.8073 GB Notification: Performance of simCode: created of all other equations (e.g. parameter, nominal, assert, etc): time 0.005913/1.326, allocations: 2.834 MB / 0.969 GB, free: 192.2 MB / 0.8073 GB Notification: Performance of simCode: created linear, non-linear and system jacobian parts: time 0.04234/1.368, allocations: 18.19 MB / 0.9868 GB, free: 185.2 MB / 0.8073 GB Notification: Performance of simCode: some other stuff during SimCode phase: time 0.002059/1.371, allocations: 2.384 MB / 0.9891 GB, free: 184.9 MB / 0.8073 GB Notification: Performance of simCode: alias equations: time 0.00795/1.378, allocations: 3.333 MB / 0.9924 GB, free: 184 MB / 0.8073 GB Notification: Performance of simCode: all other stuff during SimCode phase: time 0.00554/1.384, allocations: 1.738 MB / 0.994 GB, free: 183.8 MB / 0.8073 GB Notification: Performance of SimCode: time 1.834e-06/1.384, allocations: 0 / 0.994 GB, free: 183.8 MB / 0.8073 GB Notification: Performance of Templates: time 0.1746/1.559, allocations: 210.9 MB / 1.2 GB, free: 13.94 MB / 0.823 GB " [Timeout remaining time 658] make -j1 -f BuildingSystems_BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DViewFactorsFlexGeo.makefile [Timeout 660] (rm -f BuildingSystems_BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DViewFactorsFlexGeo.pipe ; mkfifo BuildingSystems_BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DViewFactorsFlexGeo.pipe ; head -c 1048576 < BuildingSystems_BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DViewFactorsFlexGeo.pipe >> ../files/BuildingSystems_BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DViewFactorsFlexGeo.sim & ./BuildingSystems_BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DViewFactorsFlexGeo -abortSlowSimulation -alarm=240 -lv LOG_STATS > BuildingSystems_BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DViewFactorsFlexGeo.pipe 2>&1) [Timeout 240] [Calling sys.exit(0), Time elapsed: 16.33465506695211]