Running: ./testmodel.py --libraries=/home/hudson/saved_omc/libraries/.openmodelica/libraries --ompython_omhome=/usr BuildingSystems_BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DViewFactors.conf.json loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.1.0+maint.om/package.mo", uses=false) [Timeout 180] "Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.1.0+maint.om/package.mo): time 0.0006642/0.0006642, allocations: 72.19 kB / 9.903 MB, free: 0.7852 MB / 10.45 MB Notification: Performance of NFInstanceAPI.mkTop(): time 0.0008895/0.001554, allocations: 435.8 kB / 10.33 MB, free: 368 kB / 10.45 MB " [Timeout remaining time 180] loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.1.0+maint.om/package.mo", uses=false) [Timeout 180] "Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.1.0+maint.om/package.mo): time 0.000704/0.000704, allocations: 161.1 kB / 11.23 MB, free: 2.941 MB / 13.93 MB Notification: Performance of NFInstanceAPI.mkTop(): time 0.000899/0.001603, allocations: 463.6 kB / 11.68 MB, free: 2.484 MB / 13.93 MB " [Timeout remaining time 180] loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.1.0+maint.om/package.mo", uses=false) [Timeout 180] "Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.1.0+maint.om/package.mo): time 0.8869/0.8869, allocations: 177.2 MB / 189.6 MB, free: 5.309 MB / 186.7 MB Notification: Performance of NFInstanceAPI.mkTop(): time 0.07699/0.9638, allocations: 53.65 MB / 243.2 MB, free: 15.58 MB / 250.7 MB " [Timeout remaining time 179] loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/NcDataReader2 2.5.1-master/package.mo", uses=false) [Timeout 180] "Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/NcDataReader2 2.5.1-master/package.mo): time 0.001272/0.001272, allocations: 241.1 kB / 244.2 MB, free: 14.63 MB / 250.7 MB Notification: Performance of NFInstanceAPI.mkTop(): time 0.0009675/0.002239, allocations: 471.5 kB / 244.7 MB, free: 14.16 MB / 250.7 MB " [Timeout remaining time 180] loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/package.mo", uses=false) [Timeout 180] "Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/package.mo): time 0.668/0.668, allocations: 138.7 MB / 384.1 MB, free: 496 kB / 362.7 MB Notification: Performance of NFInstanceAPI.mkTop(): time 0.06355/0.7315, allocations: 42.4 MB / 426.5 MB, free: 5.945 MB / 410.7 MB " [Timeout remaining time 179] Using package BuildingSystems with version 2.0.0-beta (/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/package.mo) Using package NcDataReader2 with version 2.5.1 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/NcDataReader2 2.5.1-master/package.mo) Using package Modelica with version 4.1.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.1.0+maint.om/package.mo) Using package Complex with version 4.1.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.1.0+maint.om/package.mo) Using package ModelicaServices with version 4.1.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.1.0+maint.om/package.mo) Running command: translateModel(BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DViewFactors,tolerance=1e-06,outputFormat="empty",numberOfIntervals=2500,variableFilter="",fileNamePrefix="BuildingSystems_BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DViewFactors") translateModel(BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DViewFactors,tolerance=1e-06,outputFormat="empty",numberOfIntervals=2500,variableFilter="",fileNamePrefix="BuildingSystems_BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DViewFactors") [Timeout 660] "Notification: Performance of FrontEnd - loaded program: time 1.733e-06/1.733e-06, allocations: 0 / 427.8 MB, free: 4.625 MB / 410.7 MB Notification: Performance of FrontEnd - Absyn->SCode: time 8.977e-06/1.071e-05, allocations: 6.312 kB / 427.8 MB, free: 4.617 MB / 410.7 MB Notification: Performance of NFInst.instantiate(BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DViewFactors): time 0.3219/0.3219, allocations: 171.7 MB / 0.5855 GB, free: 4.797 MB / 0.5573 GB Notification: Performance of NFInst.instExpressions: time 0.02015/0.3421, allocations: 14.08 MB / 0.5992 GB, free: 6.715 MB / 0.573 GB Notification: Performance of NFInst.updateImplicitVariability: time 0.002338/0.3444, allocations: 174.8 kB / 0.5994 GB, free: 6.543 MB / 0.573 GB [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/BaseClasses/ConstructionGeneral.mo:4:3-26:121:writable] Warning: Connector toSurfacePort_1 is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/BaseClasses/ConstructionGeneral.mo:27:3-50:117:writable] Warning: Connector toSurfacePort_2 is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Climate/Sources/RadiationFixed.mo:4:3-10:117:writable] Warning: Connector radiationPort is not balanced: The number of potential variables (5) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/BaseClasses/ConstructionGeneral.mo:4:3-26:121:writable] Warning: Connector toSurfacePort_1 is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/BaseClasses/ConstructionGeneral.mo:27:3-50:117:writable] Warning: Connector toSurfacePort_2 is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Climate/Sources/RadiationFixed.mo:4:3-10:117:writable] Warning: Connector radiationPort is not balanced: The number of potential variables (5) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/BaseClasses/ConstructionGeneral.mo:4:3-26:121:writable] Warning: Connector toSurfacePort_1 is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/BaseClasses/ConstructionGeneral.mo:27:3-50:117:writable] Warning: Connector toSurfacePort_2 is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Climate/Sources/RadiationFixed.mo:4:3-10:117:writable] Warning: Connector radiationPort is not balanced: The number of potential variables (5) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/BaseClasses/ConstructionGeneral.mo:4:3-26:121:writable] Warning: Connector toSurfacePort_1 is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/BaseClasses/ConstructionGeneral.mo:27:3-50:117:writable] Warning: Connector toSurfacePort_2 is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Climate/Sources/RadiationFixed.mo:4:3-10:117:writable] Warning: Connector radiationPort is not balanced: The number of potential variables (5) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/Ambience.mo:52:3-55:54:writable] Warning: Connector toAirPorts is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/Ambience.mo:56:3-59:53:writable] Warning: Connector toSurfacePorts is not balanced: The number of potential variables (6) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Climate/SolarRadiationTransformers/SolarRadiationTransformerGeneral.mo:25:3-27:116:writable] Warning: Connector radiationPort is not balanced: The number of potential variables (5) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/BaseClasses/ZoneTemplateGeneral.mo:63:3-67:55:writable] Warning: Connector toConstructionPorts is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/BaseClasses/RadiationDistribution.mo:13:3-15:72:writable] Warning: Connector toSurfacePorts is not balanced: The number of potential variables (6) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/BaseClasses/SurfaceGeneral.mo:4:3-6:117:writable] Warning: Connector toConstructionPort is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/Surfaces/SurfaceToAir.mo:5:3-7:118:writable] Warning: Connector toAirPort is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/Surfaces/SurfaceToAir.mo:8:3-12:115:writable] Warning: Connector toSurfacesPort is not balanced: The number of potential variables (6) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/Surfaces/SurfacesToAir.mo:9:3-12:23:writable] Warning: Connector toConstructionPorts is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/Surfaces/SurfacesToAir.mo:13:3-16:23:writable] Warning: Connector toSurfacesPorts is not balanced: The number of potential variables (6) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/Surfaces/SurfacesToAir.mo:17:3-19:113:writable] Warning: Connector toAirPorts is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/BaseClasses/AirvolumeGeneral.mo:40:3-41:97:writable] Warning: Connector toSurfacePorts is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/BaseClasses/SurfaceGeneral.mo:4:3-6:117:writable] Warning: Connector toConstructionPort is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/Surfaces/SurfaceToAir.mo:5:3-7:118:writable] Warning: Connector toAirPort is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/Surfaces/SurfaceToAir.mo:8:3-12:115:writable] Warning: Connector toSurfacesPort is not balanced: The number of potential variables (6) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/BaseClasses/SurfaceGeneral.mo:4:3-6:117:writable] Warning: Connector toConstructionPort is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/Surfaces/SurfaceToAir.mo:5:3-7:118:writable] Warning: Connector toAirPort is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/Surfaces/SurfaceToAir.mo:8:3-12:115:writable] Warning: Connector toSurfacesPort is not balanced: The number of potential variables (6) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/BaseClasses/SurfaceGeneral.mo:4:3-6:117:writable] Warning: Connector toConstructionPort is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/Surfaces/SurfaceToAir.mo:5:3-7:118:writable] Warning: Connector toAirPort is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/Surfaces/SurfaceToAir.mo:8:3-12:115:writable] Warning: Connector toSurfacesPort is not balanced: The number of potential variables (6) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/BaseClasses/SurfaceGeneral.mo:4:3-6:117:writable] Warning: Connector toConstructionPort is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/Surfaces/SurfaceToAir.mo:5:3-7:118:writable] Warning: Connector toAirPort is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/Surfaces/SurfaceToAir.mo:8:3-12:115:writable] Warning: Connector toSurfacesPort is not balanced: The number of potential variables (6) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/BaseClasses/ConstructionGeneral.mo:4:3-26:121:writable] Warning: Connector toSurfacePort_1 is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/BaseClasses/ConstructionGeneral.mo:27:3-50:117:writable] Warning: Connector toSurfacePort_2 is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Climate/Sources/RadiationFixed.mo:4:3-10:117:writable] Warning: Connector radiationPort is not balanced: The number of potential variables (5) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/BaseClasses/SurfaceGeneral.mo:4:3-6:117:writable] Warning: Connector toConstructionPort is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/Surfaces/SurfaceToAir.mo:5:3-7:118:writable] Warning: Connector toAirPort is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/Surfaces/SurfaceToAir.mo:8:3-12:115:writable] Warning: Connector toSurfacesPort is not balanced: The number of potential variables (6) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/BaseClasses/ConstructionGeneral.mo:4:3-26:121:writable] Warning: Connector toSurfacePort_1 is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/BaseClasses/ConstructionGeneral.mo:27:3-50:117:writable] Warning: Connector toSurfacePort_2 is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Climate/Sources/RadiationFixed.mo:4:3-10:117:writable] Warning: Connector radiationPort is not balanced: The number of potential variables (5) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/BaseClasses/SurfaceGeneral.mo:4:3-6:117:writable] Warning: Connector toConstructionPort is not balanced: The number of potential variables (20) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/Surfaces/SurfaceToAir.mo:5:3-7:118:writable] Warning: Connector toAirPort is not balanced: The number of potential variables (2) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Buildings/Surfaces/SurfaceToAir.mo:8:3-12:115:writable] Warning: Connector toSurfacesPort is not balanced: The number of potential variables (6) is not equal to the number of flow variables (0). [Non-standard Modelica: --allowNonStandardModelica=unbalancedModel] Notification: Performance of NFTyping.typeComponents: time 0.002211/0.3466, allocations: 1.612 MB / 0.601 GB, free: 4.945 MB / 0.573 GB Notification: Performance of NFTyping.typeBindings: time 0.004898/0.3515, allocations: 4.253 MB / 0.6051 GB, free: 0.668 MB / 0.573 GB Notification: Performance of NFTyping.typeClassSections: time 0.003169/0.3547, allocations: 2.559 MB / 0.6076 GB, free: 14.11 MB / 0.5886 GB Notification: Performance of NFFlatten.flatten: time 0.009075/0.3638, allocations: 15.25 MB / 0.6225 GB, free: 14.81 MB / 0.6042 GB Notification: Performance of NFFlatten.resolveConnections: time 0.007977/0.3718, allocations: 9.834 MB / 0.6321 GB, free: 4.863 MB / 0.6042 GB Notification: Performance of NFEvalConstants.evaluate: time 0.00975/0.3815, allocations: 10.81 MB / 0.6427 GB, free: 10.04 MB / 0.6198 GB Notification: Performance of NFSimplifyModel.simplify: time 0.006036/0.3875, allocations: 6.801 MB / 0.6493 GB, free: 3.223 MB / 0.6198 GB Notification: Performance of NFPackage.collectConstants: time 0.001516/0.3891, allocations: 1.695 MB / 0.651 GB, free: 1.527 MB / 0.6198 GB Notification: Performance of NFFlatten.collectFunctions: time 0.2496/0.6387, allocations: 3.577 MB / 0.6545 GB, free: 31.08 MB / 0.6198 GB Notification: Performance of NFScalarize.scalarize: time 0.004551/0.6433, allocations: 3.612 MB / 0.658 GB, free: 31.08 MB / 0.6198 GB Notification: Performance of NFVerifyModel.verify: time 0.007897/0.6512, allocations: 4.184 MB / 0.6621 GB, free: 31.08 MB / 0.6198 GB Notification: Performance of NFConvertDAE.convert: time 0.01255/0.6637, allocations: 12.52 MB / 0.6743 GB, free: 30.05 MB / 0.6198 GB Notification: Performance of FrontEnd - DAE generated: time 1.502e-05/0.6637, allocations: 0 / 0.6743 GB, free: 30.05 MB / 0.6198 GB Notification: Performance of FrontEnd: time 1.533e-06/0.6637, allocations: 0 / 0.6743 GB, free: 30.05 MB / 0.6198 GB Notification: Performance of Transformations before backend: time 0.0005321/0.6642, allocations: 3.062 kB / 0.6743 GB, free: 30.05 MB / 0.6198 GB Notification: Model statistics after passing the front-end and creating the data structures used by the back-end: * Number of equations: 3007 * Number of variables: 3007 Notification: Performance of Generate backend data structure: time 0.01851/0.6828, allocations: 15.23 MB / 0.6892 GB, free: 25.06 MB / 0.6198 GB Notification: Performance of prepare preOptimizeDAE: time 3.347e-05/0.6828, allocations: 10.28 kB / 0.6892 GB, free: 25.06 MB / 0.6198 GB Notification: Performance of preOpt normalInlineFunction (simulation): time 0.004106/0.6869, allocations: 2.362 MB / 0.6915 GB, free: 24.93 MB / 0.6198 GB Notification: Performance of preOpt evaluateParameters (simulation): time 0.007018/0.6939, allocations: 3.77 MB / 0.6952 GB, free: 23.72 MB / 0.6198 GB Notification: Performance of preOpt simplifyIfEquations (simulation): time 0.0007662/0.6947, allocations: 1.798 MB / 0.697 GB, free: 22.57 MB / 0.6198 GB Notification: Performance of preOpt expandDerOperator (simulation): time 0.001293/0.696, allocations: 1.111 MB / 0.698 GB, free: 22.56 MB / 0.6198 GB Notification: Performance of preOpt clockPartitioning (simulation): time 0.0129/0.7089, allocations: 9.228 MB / 0.7071 GB, free: 20.89 MB / 0.6198 GB Notification: Performance of preOpt findStateOrder (simulation): time 0.0002335/0.7091, allocations: 18 kB / 0.7071 GB, free: 20.89 MB / 0.6198 GB Notification: Performance of preOpt replaceEdgeChange (simulation): time 0.0008733/0.71, allocations: 474.3 kB / 0.7075 GB, free: 20.89 MB / 0.6198 GB Notification: Performance of preOpt inlineArrayEqn (simulation): time 0.0007088/0.7107, allocations: 0.5564 MB / 0.7081 GB, free: 20.88 MB / 0.6198 GB Notification: Performance of preOpt removeEqualRHS (simulation): time 0.006345/0.717, allocations: 3.782 MB / 0.7118 GB, free: 20.62 MB / 0.6198 GB Warning: The model contains alias variables with redundant start and/or conflicting nominal values. It is recommended to resolve the conflicts, because otherwise the system could be hard to solve. To print the conflicting alias sets and the chosen candidates please use -d=aliasConflicts. Notification: Performance of preOpt removeSimpleEquations (simulation): time 0.04928/0.7663, allocations: 30.34 MB / 0.7414 GB, free: 7.633 MB / 0.6198 GB Notification: Performance of preOpt comSubExp (simulation): time 0.004697/0.771, allocations: 2.603 MB / 0.7439 GB, free: 5.953 MB / 0.6198 GB Notification: Performance of preOpt resolveLoops (simulation): time 0.001052/0.7721, allocations: 0.6653 MB / 0.7446 GB, free: 5.441 MB / 0.6198 GB Notification: Performance of preOpt evalFunc (simulation): time 0.0007925/0.7729, allocations: 303.7 kB / 0.7449 GB, free: 5.238 MB / 0.6198 GB Notification: Performance of preOpt encapsulateWhenConditions (simulation): time 0.001692/0.7745, allocations: 1.544 MB / 0.7464 GB, free: 4.246 MB / 0.6198 GB Notification: Performance of pre-optimization done (n=345): time 8.295e-06/0.7746, allocations: 0.7188 kB / 0.7464 GB, free: 4.246 MB / 0.6198 GB Notification: Performance of matching and sorting (n=345): time 0.01138/0.7859, allocations: 4.211 MB / 0.7505 GB, free: 1.441 MB / 0.6198 GB Notification: Performance of inlineWhenForInitialization (initialization): time 0.0001021/0.786, allocations: 0.7379 MB / 0.7512 GB, free: 0.5508 MB / 0.6198 GB Notification: Performance of selectInitializationVariablesDAE (initialization): time 0.005501/0.7915, allocations: 4.556 MB / 0.7557 GB, free: 13.75 MB / 0.6355 GB Notification: Performance of collectPreVariables (initialization): time 0.0003707/0.7919, allocations: 97.41 kB / 0.7558 GB, free: 13.7 MB / 0.6355 GB Notification: Performance of collectInitialEqns (initialization): time 0.003033/0.7949, allocations: 4.575 MB / 0.7602 GB, free: 9.859 MB / 0.6355 GB Notification: Performance of collectInitialBindings (initialization): time 0.0008513/0.7958, allocations: 1.288 MB / 0.7615 GB, free: 8.781 MB / 0.6355 GB Notification: Performance of simplifyInitialFunctions (initialization): time 0.001801/0.7976, allocations: 1.475 MB / 0.7629 GB, free: 7.777 MB / 0.6355 GB Notification: Performance of setup shared object (initialization): time 6.995e-05/0.7977, allocations: 305.8 kB / 0.7632 GB, free: 7.477 MB / 0.6355 GB Notification: Performance of preBalanceInitialSystem (initialization): time 0.002014/0.7997, allocations: 1.735 MB / 0.7649 GB, free: 5.867 MB / 0.6355 GB Notification: Performance of partitionIndependentBlocks (initialization): time 0.002755/0.8024, allocations: 3.67 MB / 0.7685 GB, free: 1.559 MB / 0.6355 GB Notification: Performance of analyzeInitialSystem (initialization): time 0.006089/0.8085, allocations: 6.98 MB / 0.7753 GB, free: 10.21 MB / 0.6511 GB Notification: Performance of solveInitialSystemEqSystem (initialization): time 2.955e-05/0.8086, allocations: 20 kB / 0.7753 GB, free: 10.2 MB / 0.6511 GB Notification: Performance of matching and sorting (n=819) (initialization): time 0.008478/0.817, allocations: 6.601 MB / 0.7818 GB, free: 4.039 MB / 0.6511 GB Notification: Performance of prepare postOptimizeDAE: time 0.0003259/0.8174, allocations: 0.5396 MB / 0.7823 GB, free: 3.5 MB / 0.6511 GB Notification: Performance of postOpt simplifyComplexFunction (initialization): time 6.973e-05/0.8174, allocations: 63.98 kB / 0.7824 GB, free: 3.438 MB / 0.6511 GB Notification: Performance of postOpt tearingSystem (initialization): time 0.003616/0.821, allocations: 1.465 MB / 0.7838 GB, free: 2.004 MB / 0.6511 GB Notification: Performance of postOpt solveSimpleEquations (initialization): time 0.005601/0.8266, allocations: 2.496 MB / 0.7862 GB, free: 15.64 MB / 0.6667 GB Notification: Performance of postOpt calculateStrongComponentJacobians (initialization): time 0.01278/0.8394, allocations: 25.28 MB / 0.8109 GB, free: 6.254 MB / 0.6823 GB Notification: Performance of postOpt simplifyAllExpressions (initialization): time 0.004212/0.8436, allocations: 0.7372 MB / 0.8116 GB, free: 5.602 MB / 0.6823 GB Notification: Performance of postOpt collapseArrayExpressions (initialization): time 0.0006635/0.8443, allocations: 486.8 kB / 0.8121 GB, free: 5.172 MB / 0.6823 GB Warning: Assuming fixed start value for the following 25 variables: wall1.construction.layer[1].T[1]:VARIABLE(min = 0.0 start = wall1.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] wall1.construction.layer[1].T[2]:VARIABLE(min = 0.0 start = wall1.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] wall1.construction.layer[2].T[1]:VARIABLE(min = 0.0 start = wall1.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] wall1.construction.layer[2].T[2]:VARIABLE(min = 0.0 start = wall1.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] wall2.construction.layer[1].T[1]:VARIABLE(min = 0.0 start = wall2.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] wall2.construction.layer[1].T[2]:VARIABLE(min = 0.0 start = wall2.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] wall2.construction.layer[2].T[1]:VARIABLE(min = 0.0 start = wall2.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] wall2.construction.layer[2].T[2]:VARIABLE(min = 0.0 start = wall2.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] wall3.construction.layer[1].T[1]:VARIABLE(min = 0.0 start = wall3.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] wall3.construction.layer[1].T[2]:VARIABLE(min = 0.0 start = wall3.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] wall3.construction.layer[2].T[1]:VARIABLE(min = 0.0 start = wall3.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] wall3.construction.layer[2].T[2]:VARIABLE(min = 0.0 start = wall3.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] wall4.construction.layer[1].T[1]:VARIABLE(min = 0.0 start = wall4.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] wall4.construction.layer[1].T[2]:VARIABLE(min = 0.0 start = wall4.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] wall4.construction.layer[2].T[1]:VARIABLE(min = 0.0 start = wall4.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] wall4.construction.layer[2].T[2]:VARIABLE(min = 0.0 start = wall4.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] zone.airvolume.mH2OLiq:VARIABLE(min = 0.0 start = 0.0 unit = \"kg\" fixed = true protected = true ) \"Liquid water mass\" type: Real ceiling.construction.layer[1].T[1]:VARIABLE(min = 0.0 start = ceiling.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] ceiling.construction.layer[1].T[2]:VARIABLE(min = 0.0 start = ceiling.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] ceiling.construction.layer[2].T[1]:VARIABLE(min = 0.0 start = ceiling.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] ceiling.construction.layer[2].T[2]:VARIABLE(min = 0.0 start = ceiling.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] floor.construction.layer[1].T[1]:VARIABLE(min = 0.0 start = floor.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] floor.construction.layer[1].T[2]:VARIABLE(min = 0.0 start = floor.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] floor.construction.layer[2].T[1]:VARIABLE(min = 0.0 start = floor.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] floor.construction.layer[2].T[2]:VARIABLE(min = 0.0 start = floor.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] Notification: Performance of preBalanceInitialSystem (initialization_lambda0): time 0.004762/0.8491, allocations: 2.138 MB / 0.8142 GB, free: 3.285 MB / 0.6823 GB Notification: Performance of partitionIndependentBlocks (initialization_lambda0): time 0.002699/0.8518, allocations: 3.665 MB / 0.8178 GB, free: 14.97 MB / 0.698 GB Notification: Performance of analyzeInitialSystem (initialization_lambda0): time 0.005919/0.8577, allocations: 6.924 MB / 0.8245 GB, free: 7.594 MB / 0.698 GB Notification: Performance of solveInitialSystemEqSystem (initialization_lambda0): time 2.436e-05/0.8577, allocations: 16 kB / 0.8245 GB, free: 7.578 MB / 0.698 GB Notification: Performance of matching and sorting (n=819) (initialization_lambda0): time 0.008312/0.866, allocations: 6.597 MB / 0.831 GB, free: 1.426 MB / 0.698 GB Notification: Performance of prepare postOptimizeDAE: time 0.0002583/0.8663, allocations: 0.5411 MB / 0.8315 GB, free: 0.8867 MB / 0.698 GB Notification: Performance of postOpt simplifyComplexFunction (initialization): time 6.221e-05/0.8663, allocations: 63.98 kB / 0.8316 GB, free: 0.8242 MB / 0.698 GB Notification: Performance of postOpt tearingSystem (initialization): time 0.003518/0.8699, allocations: 1.46 MB / 0.833 GB, free: 15.38 MB / 0.7136 GB Notification: Performance of postOpt solveSimpleEquations (initialization): time 0.005306/0.8752, allocations: 2.496 MB / 0.8354 GB, free: 13.02 MB / 0.7136 GB Notification: Performance of postOpt calculateStrongComponentJacobians (initialization): time 0.01218/0.8873, allocations: 25.24 MB / 0.8601 GB, free: 2.973 MB / 0.7292 GB Notification: Performance of postOpt simplifyAllExpressions (initialization): time 0.003907/0.8912, allocations: 0.5813 MB / 0.8607 GB, free: 2.391 MB / 0.7292 GB Notification: Performance of postOpt collapseArrayExpressions (initialization): time 0.000653/0.8919, allocations: 487.7 kB / 0.8611 GB, free: 1.914 MB / 0.7292 GB Warning: Assuming fixed start value for the following 25 variables: wall1.construction.layer[1].T[1]:VARIABLE(min = 0.0 start = wall1.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] wall1.construction.layer[1].T[2]:VARIABLE(min = 0.0 start = wall1.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] wall1.construction.layer[2].T[1]:VARIABLE(min = 0.0 start = wall1.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] wall1.construction.layer[2].T[2]:VARIABLE(min = 0.0 start = wall1.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] wall2.construction.layer[1].T[1]:VARIABLE(min = 0.0 start = wall2.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] wall2.construction.layer[1].T[2]:VARIABLE(min = 0.0 start = wall2.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] wall2.construction.layer[2].T[1]:VARIABLE(min = 0.0 start = wall2.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] wall2.construction.layer[2].T[2]:VARIABLE(min = 0.0 start = wall2.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] wall3.construction.layer[1].T[1]:VARIABLE(min = 0.0 start = wall3.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] wall3.construction.layer[1].T[2]:VARIABLE(min = 0.0 start = wall3.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] wall3.construction.layer[2].T[1]:VARIABLE(min = 0.0 start = wall3.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] wall3.construction.layer[2].T[2]:VARIABLE(min = 0.0 start = wall3.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] wall4.construction.layer[1].T[1]:VARIABLE(min = 0.0 start = wall4.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] wall4.construction.layer[1].T[2]:VARIABLE(min = 0.0 start = wall4.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] wall4.construction.layer[2].T[1]:VARIABLE(min = 0.0 start = wall4.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] wall4.construction.layer[2].T[2]:VARIABLE(min = 0.0 start = wall4.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] zone.airvolume.mH2OLiq:VARIABLE(min = 0.0 start = 0.0 unit = \"kg\" fixed = true protected = true ) \"Liquid water mass\" type: Real ceiling.construction.layer[1].T[1]:VARIABLE(min = 0.0 start = ceiling.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] ceiling.construction.layer[1].T[2]:VARIABLE(min = 0.0 start = ceiling.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] ceiling.construction.layer[2].T[1]:VARIABLE(min = 0.0 start = ceiling.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] ceiling.construction.layer[2].T[2]:VARIABLE(min = 0.0 start = ceiling.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] floor.construction.layer[1].T[1]:VARIABLE(min = 0.0 start = floor.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] floor.construction.layer[1].T[2]:VARIABLE(min = 0.0 start = floor.construction.layer[1].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] floor.construction.layer[2].T[1]:VARIABLE(min = 0.0 start = floor.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] floor.construction.layer[2].T[2]:VARIABLE(min = 0.0 start = floor.construction.layer[2].T_start unit = \"K\" fixed = true nominal = 300.0 ) \"Temperature of the numerical node\" type: Real [2,2] Notification: Model statistics after passing the back-end for initialization: * Number of independent subsystems: 272 * Number of states: 0 () * Number of discrete variables: 11 (zone.heatingLoad.I.local_reset,zone.coolingLoad.I.local_reset,ambience.radiation[6].outsidePolarCircle,ambience.radiation[5].outsidePolarCircle,ambience.radiation[4].outsidePolarCircle,ambience.radiation[3].outsidePolarCircle,ambience.radiation[2].outsidePolarCircle,ambience.radiation[1].outsidePolarCircle,ambience.weatherDataReader.weatherData.conTim.tNext,$PRE.ambience.weatherDataReader.weatherData.conTim.tNext,$whenCondition1) * Number of discrete states: 0 () * Number of clocked states: 0 () * Top-level inputs: 0 Notification: Strong component statistics for initialization (694): * Single equations (assignments): 657 * Array equations: 0 * Algorithm blocks: 12 * Record equations: 0 * When equations: 0 * If-equations: 0 * Equation systems (not torn): 12 * Torn equation systems: 13 * Mixed (continuous/discrete) equation systems: 0 Notification: Equation system details (not torn): * Constant Jacobian (size): 0 systems * Linear Jacobian (size,density): 0 systems * Non-linear Jacobian (size): 12 systems {1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1} * Without analytic Jacobian (size): 0 systems Notification: Torn system details for strict tearing set: * Linear torn systems (#iteration vars, #inner vars, density): 6 systems {(1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%)} * Non-linear torn systems (#iteration vars, #inner vars): 7 systems {(6,24), (1,3), (1,3), (1,3), (1,3), (1,3), (1,3)} Notification: Performance of prepare postOptimizeDAE: time 0.001443/0.8933, allocations: 0.7673 MB / 0.8619 GB, free: 1.254 MB / 0.7292 GB Notification: Performance of postOpt lateInlineFunction (simulation): time 0.0007173/0.8941, allocations: 409.4 kB / 0.8623 GB, free: 0.8594 MB / 0.7292 GB Notification: Performance of postOpt wrapFunctionCalls (simulation): time 0.006036/0.9001, allocations: 3.696 MB / 0.8659 GB, free: 13.11 MB / 0.7448 GB Notification: Performance of postOpt inlineArrayEqn (simulation): time 2.352e-05/0.9001, allocations: 44 kB / 0.8659 GB, free: 13.07 MB / 0.7448 GB Notification: Performance of postOpt constantLinearSystem (simulation): time 1.473e-05/0.9001, allocations: 8 kB / 0.8659 GB, free: 13.06 MB / 0.7448 GB Notification: Performance of postOpt simplifysemiLinear (simulation): time 0.004032/0.9042, allocations: 2.412 MB / 0.8683 GB, free: 10.57 MB / 0.7448 GB Notification: Performance of postOpt removeSimpleEquations (simulation): time 0.01216/0.9163, allocations: 9.376 MB / 0.8774 GB, free: 1.758 MB / 0.7448 GB Notification: Performance of postOpt simplifyComplexFunction (simulation): time 9.838e-06/0.9163, allocations: 8 kB / 0.8774 GB, free: 1.75 MB / 0.7448 GB Notification: Performance of postOpt solveSimpleEquations (simulation): time 0.002362/0.9187, allocations: 1.061 MB / 0.8785 GB, free: 0.7227 MB / 0.7448 GB Notification: Performance of postOpt removeConstants (simulation): time 0.001381/0.9201, allocations: 1.03 MB / 0.8795 GB, free: 15.69 MB / 0.7605 GB Notification: Performance of postOpt tearingSystem (simulation): time 0.004169/0.9242, allocations: 1.837 MB / 0.8813 GB, free: 13.79 MB / 0.7605 GB Notification: Performance of postOpt inputDerivativesUsed (simulation): time 0.0002124/0.9245, allocations: 119.9 kB / 0.8814 GB, free: 13.67 MB / 0.7605 GB Notification: Performance of postOpt calculateStrongComponentJacobians (simulation): time 0.01165/0.9361, allocations: 24.24 MB / 0.9051 GB, free: 4.176 MB / 0.7761 GB Notification: Performance of postOpt calculateStateSetsJacobians (simulation): time 1.447e-05/0.9361, allocations: 15.08 kB / 0.9051 GB, free: 4.164 MB / 0.7761 GB Notification: Performance of postOpt symbolicJacobian (simulation): time 0.006114/0.9422, allocations: 4.329 MB / 0.9093 GB, free: 15.69 MB / 0.7917 GB Notification: Performance of postOpt simplifyTimeIndepFuncCalls (simulation): time 0.0006009/0.9428, allocations: 116 kB / 0.9094 GB, free: 15.58 MB / 0.7917 GB Notification: Performance of postOpt simplifyAllExpressions (simulation): time 0.00144/0.9443, allocations: 127.3 kB / 0.9095 GB, free: 15.46 MB / 0.7917 GB Notification: Performance of postOpt findZeroCrossings (simulation): time 0.0004624/0.9447, allocations: 319.9 kB / 0.9098 GB, free: 15.15 MB / 0.7917 GB Notification: Performance of postOpt collapseArrayExpressions (simulation): time 0.0001898/0.9449, allocations: 95.94 kB / 0.9099 GB, free: 15.06 MB / 0.7917 GB Notification: Performance of sorting global known variables: time 0.001927/0.9469, allocations: 2.154 MB / 0.912 GB, free: 13.15 MB / 0.7917 GB Notification: Performance of sort global known variables: time 7e-08/0.9469, allocations: 4 kB / 0.912 GB, free: 13.14 MB / 0.7917 GB Notification: Performance of remove unused functions: time 0.01114/0.958, allocations: 6.464 MB / 0.9184 GB, free: 6.66 MB / 0.7917 GB Notification: Model statistics after passing the back-end for simulation: * Number of independent subsystems: 33 * Number of states: 30 (wall1.construction.layer[1].T[1],wall1.construction.layer[1].T[2],wall1.construction.layer[2].T[1],wall1.construction.layer[2].T[2],wall2.construction.layer[1].T[1],wall2.construction.layer[1].T[2],wall2.construction.layer[2].T[1],wall2.construction.layer[2].T[2],wall3.construction.layer[1].T[1],wall3.construction.layer[1].T[2],wall3.construction.layer[2].T[1],wall3.construction.layer[2].T[2],wall4.construction.layer[1].T[1],wall4.construction.layer[1].T[2],wall4.construction.layer[2].T[1],wall4.construction.layer[2].T[2],zone.airvolume.mH2OLiq,zone.airvolume.air.dynBal.U,zone.airvolume.air.dynBal.m,zone.airvolume.air.dynBal.mXi[1],zone.heatingLoad.I.y,zone.coolingLoad.I.y,ceiling.construction.layer[1].T[1],ceiling.construction.layer[1].T[2],ceiling.construction.layer[2].T[1],ceiling.construction.layer[2].T[2],floor.construction.layer[1].T[1],floor.construction.layer[1].T[2],floor.construction.layer[2].T[1],floor.construction.layer[2].T[2]) * Number of discrete variables: 2 ($whenCondition1,ambience.weatherDataReader.weatherData.conTim.tNext) * Number of discrete states: 1 (ambience.weatherDataReader.weatherData.conTim.tNext) * Number of clocked states: 0 () * Top-level inputs: 0 Notification: Strong component statistics for simulation (364): * Single equations (assignments): 338 * Array equations: 0 * Algorithm blocks: 0 * Record equations: 0 * When equations: 1 * If-equations: 0 * Equation systems (not torn): 0 * Torn equation systems: 25 * Mixed (continuous/discrete) equation systems: 0 Notification: Torn system details for strict tearing set: * Linear torn systems (#iteration vars, #inner vars, density): 6 systems {(1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%)} * Non-linear torn systems (#iteration vars, #inner vars): 19 systems {(6,24), (1,1), (1,1), (1,1), (1,1), (1,1), (1,1), (1,3), (1,3), (1,3), (1,3), (1,3), (1,3), (1,1), (1,1), (1,1), (1,1), (1,1), (1,1)} Notification: Performance of Backend phase and start with SimCode phase: time 0.002262/0.9603, allocations: 1.185 MB / 0.9195 GB, free: 5.844 MB / 0.7917 GB Notification: Performance of simCode: created initialization part: time 0.2584/1.219, allocations: 16.12 MB / 0.9353 GB, free: 209.5 MB / 0.7917 GB Notification: Performance of simCode: created event and clocks part: time 0.0002017/1.219, allocations: 108.4 kB / 0.9354 GB, free: 209.5 MB / 0.7917 GB Notification: Performance of simCode: created simulation system equations: time 0.003427/1.222, allocations: 3.154 MB / 0.9384 GB, free: 207.9 MB / 0.7917 GB Notification: Performance of simCode: created of all other equations (e.g. parameter, nominal, assert, etc): time 0.00551/1.228, allocations: 2.474 MB / 0.9409 GB, free: 207.9 MB / 0.7917 GB Notification: Performance of simCode: created linear, non-linear and system jacobian parts: time 0.04557/1.273, allocations: 17.36 MB / 0.9578 GB, free: 201 MB / 0.7917 GB Notification: Performance of simCode: some other stuff during SimCode phase: time 0.002653/1.276, allocations: 2.267 MB / 0.96 GB, free: 200.7 MB / 0.7917 GB Notification: Performance of simCode: alias equations: time 0.007843/1.284, allocations: 2.046 MB / 0.962 GB, free: 200.3 MB / 0.7917 GB Notification: Performance of simCode: all other stuff during SimCode phase: time 0.003986/1.288, allocations: 1.291 MB / 0.9633 GB, free: 200.2 MB / 0.7917 GB Notification: Performance of SimCode: time 1.463e-06/1.288, allocations: 0 / 0.9633 GB, free: 200.2 MB / 0.7917 GB Notification: Performance of Templates: time 0.1411/1.429, allocations: 148 MB / 1.108 GB, free: 85.95 MB / 0.7917 GB " [Timeout remaining time 659] make -j1 -f BuildingSystems_BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DViewFactors.makefile [Timeout 660] (rm -f BuildingSystems_BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DViewFactors.pipe ; mkfifo BuildingSystems_BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DViewFactors.pipe ; head -c 1048576 < BuildingSystems_BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DViewFactors.pipe >> ../files/BuildingSystems_BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DViewFactors.sim & ./BuildingSystems_BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DViewFactors -abortSlowSimulation -alarm=240 -lv LOG_STATS > BuildingSystems_BuildingSystems.Buildings.Zones.Examples.SingleZoneThermal1DViewFactors.pipe 2>&1) [Timeout 240] [Calling sys.exit(0), Time elapsed: 10.811401791870594]