startTime=3.024e+06
stopTime=3.456e+06
tolerance=1e-06
numberOfIntervals=2500
stepSize=172.8
wasm-jit simulation: simulate(Buildings.DHC.Plants.Combined.Examples.AllElectricCWStorage,startTime=3.024e+06,stopTime=3.456e+06,tolerance=1e-06,numberOfIntervals=2500,outputFormat="empty",variableFilter="",fileNamePrefix="Buildings_13_Buildings.DHC.Plants.Combined.Examples.AllElectricCWStorage",simflags="-abortSlowSimulation -alarm=240   -lv LOG_STATS")
Simulation execution failed for model: Buildings.DHC.Plants.Combined.Examples.AllElectricCWStorage
LOG_STDOUT        | info    | ... loading "tab1" from "/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Resources/Data/DHC/Loads/Examples/MediumOffice-90.1-2010-5A.mos"
LOG_STDOUT        | info    | ... loading "tab1" from "/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Resources/Data/DHC/Loads/Examples/MediumOffice-90.1-2010-5A.mos"
LOG_STDOUT        | info    | ... loading "tab1" from "/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Resources/Data/DHC/Loads/Examples/MediumOffice-90.1-2010-5A.mos"
LOG_STDOUT        | info    | ... loading "tab1" from "/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Resources/Data/DHC/Loads/Examples/MediumOffice-90.1-2010-5A.mos"
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_STDOUT        | warning | Non-Linear Solver try to handle a problem with a called assert.
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_STDOUT        | warning | Non-Linear Solver try to handle a problem with a called assert.
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_STDOUT        | warning | Non-Linear Solver try to handle a problem with a called assert.
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_STDOUT        | warning | Non-Linear Solver try to handle a problem with a called assert.
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_STDOUT        | warning | Non-Linear Solver try to handle a problem with a called assert.
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_STDOUT        | warning | Non-Linear Solver try to handle a problem with a called assert.
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_STDOUT        | warning | Non-Linear Solver try to handle a problem with a called assert.
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_STDOUT        | warning | Non-Linear Solver try to handle a problem with a called assert.
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_STDOUT        | warning | Non-Linear Solver try to handle a problem with a called assert.
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_STDOUT        | warning | Non-Linear Solver try to handle a problem with a called assert.
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:101:3-101:89:writable]
|                 | |       | The following assertion has been violated at time 3024000.000000
|                 | |       | ((pla.pumChiWat.pum.etaHyd >= 0.0)) --> "Variable violating min constraint: 0.0 <= pla.pumChiWat.pum.etaHyd, has value: -7.07755e-42"
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:101:3-101:89:writable]
|                 | |       | The following assertion has been violated at time 3024000.000000
|                 | |       | ((pla.pumHeaWat.pum.etaHyd >= 0.0)) --> "Variable violating min constraint: 0.0 <= pla.pumHeaWat.pum.etaHyd, has value: -1.18534e-40"
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:101:3-101:89:writable]
|                 | |       | The following assertion has been violated at time 3024000.000000
|                 | |       | ((pla.pumConWatCon.pum.etaHyd >= 0.0)) --> "Variable violating min constraint: 0.0 <= pla.pumConWatCon.pum.etaHyd, has value: -1.16699e-46"
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:101:3-101:89:writable]
|                 | |       | The following assertion has been violated at time 3024000.000000
|                 | |       | ((pla.pumConWatEva.pum.etaHyd >= 0.0)) --> "Variable violating min constraint: 0.0 <= pla.pumConWatEva.pum.etaHyd, has value: -1.54292e-41"
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.1.0+maint.om/Fluid/Interfaces.mo:13:5-14:68:writable]
|                 | |       | The following assertion has been violated at time 3024000.000000
|                 | |       | ((disHea.ports_aCon[1].m_flow >= 0.0 and disHea.ports_aCon[1].m_flow <= 1e5)) --> "Variable violating min/max constraint: 0.0 <= disHea.ports_aCon[1].m_flow <= 1e5, has value: -4.03675e-22"
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.1.0+maint.om/Fluid/Interfaces.mo:13:5-14:68:writable]
|                 | |       | The following assertion has been violated at time 3024000.000000
|                 | |       | ((disHea.ports_aCon[2].m_flow >= 0.0 and disHea.ports_aCon[2].m_flow <= 1e5)) --> "Variable violating min/max constraint: 0.0 <= disHea.ports_aCon[2].m_flow <= 1e5, has value: -4.36323e-22"
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/DHC/Networks/BaseClasses/PartialDistribution2Pipe.mo:81:3-85:55:writable]
|                 | |       | The following assertion has been violated at time 3024000.000000
|                 | |       | ((disHea.mCon_flow[1] >= 0.0 and disHea.mCon_flow[1] <= 1e5)) --> "Variable violating min/max constraint: 0.0 <= disHea.mCon_flow[1] <= 1e5, has value: -4.03675e-22"
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/DHC/Networks/BaseClasses/PartialDistribution2Pipe.mo:81:3-85:55:writable]
|                 | |       | The following assertion has been violated at time 3024000.000000
|                 | |       | ((disHea.mCon_flow[2] >= 0.0 and disHea.mCon_flow[2] <= 1e5)) --> "Variable violating min/max constraint: 0.0 <= disHea.mCon_flow[2] <= 1e5, has value: -4.36323e-22"
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Interfaces/PartialTwoPortInterface.mo:20:3-21:81:writable]
|                 | |       | The following assertion has been violated at time 3024000.000000
|                 | |       | ((disHea.con[1].pipDisSup.m_flow >= 0.0 and disHea.con[1].pipDisSup.m_flow <= 1e5)) --> "Variable violating min/max constraint: 0.0 <= disHea.con[1].pipDisSup.m_flow <= 1e5, has value: -8.39998e-22"
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Interfaces/PartialTwoPortInterface.mo:20:3-21:81:writable]
|                 | |       | The following assertion has been violated at time 3024000.000000
|                 | |       | ((disHea.con[1].pipDisRet.m_flow >= 0.0 and disHea.con[1].pipDisRet.m_flow <= 1e5)) --> "Variable violating min/max constraint: 0.0 <= disHea.con[1].pipDisRet.m_flow <= 1e5, has value: -8.39998e-22"
LOG_SUCCESS       | info    | The initialization finished successfully with 3 homotopy steps.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:101:3-101:89:writable]
|                 | |       | The following assertion has been violated at time 3024000.692936
|                 | |       | ((pla.heaPum.pum.etaHyd >= 0.0)) --> "Variable violating min constraint: 0.0 <= pla.heaPum.pum.etaHyd, has value: -7.91561e-33"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024600.000000
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 683799 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024600.000000
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 683799 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:311:3-315:28:writable]
|                 | |       | The following assertion has been violated at time 3024600.000000
|                 | |       | ((loaCoo[1].bui.disFloCoo.pumFlo.eff.yMot >= 0.0)) --> "Variable violating min constraint: 0.0 <= loaCoo[1].bui.disFloCoo.pumFlo.eff.yMot, has value: -5.72625"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:311:3-315:28:writable]
|                 | |       | The following assertion has been violated at time 3024600.000000
|                 | |       | ((loaCoo[2].bui.disFloCoo.pumFlo.eff.yMot >= 0.0)) --> "Variable violating min constraint: 0.0 <= loaCoo[2].bui.disFloCoo.pumFlo.eff.yMot, has value: -5.72625"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024600.000000
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 683800 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024600.000000
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 683800 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024600.000000
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 683800 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024600.000000
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 683800 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024600.000000
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 683800 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024600.000000
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 683800 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024600.000000
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 683800 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024600.000000
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 683800 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024691.200000
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 780348 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024691.200000
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 780348 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024780.000000
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 877796 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024780.000000
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 877796 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024780.000000
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 877796 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024780.000000
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 877796 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024780.000000
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 877796 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024780.000000
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 877796 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024780.000000
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 877796 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024780.000000
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 877796 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024780.000000
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 877796 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024780.000000
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 877796 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024864.000000
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 955274 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024864.000000
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 955274 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024900.000000
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 988541 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024900.000000
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 988541 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024900.000000
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 988541 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024900.000000
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 988541 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024900.000000
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 988541 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024900.000000
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 988541 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024900.000000
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 988541 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024900.000000
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 988541 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024900.000000
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 988541 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024900.000000
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 988541 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024900.000000
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 988541 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024900.000000
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 988541 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024900.000000
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 988541 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024900.000000
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 988541 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024900.000303
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 988541 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024900.000303
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 988541 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024900.000303
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 988542 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024900.000303
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 988542 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024900.000303
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 988542 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024900.000303
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 988542 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024900.000303
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 988542 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024900.000303
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 988542 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024900.000303
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 988542 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024900.000303
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 988542 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024900.000303
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 988542 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024900.000303
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 988542 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024900.011234
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 988572 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024900.011234
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 988572 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024900.011234
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 988572 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024900.011234
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 988572 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024900.011234
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 988572 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024900.011234
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 988572 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024900.011234
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 988572 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024900.011234
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 988572 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024900.011234
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 988572 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024900.011234
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 988572 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024900.028942
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 954827 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024900.028942
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 954827 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024900.028942
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 954827 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024900.028942
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 954827 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024900.028942
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 954827 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024900.028942
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 954827 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024900.140006
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 955835 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024900.140006
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 955835 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024900.140006
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 955835 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024900.140006
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 955835 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024900.140006
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 955835 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024900.140006
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 955835 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024900.300303
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 956295 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024900.300303
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 956295 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024900.300303
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 956295 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024900.300303
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 956295 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024900.300303
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 956295 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024900.300303
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 956295 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024900.692936
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 957451 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024900.692936
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 957451 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024900.692936
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 957451 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024900.692936
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 957451 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024900.692936
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 957451 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024900.692936
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 957451 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024900.692936
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 957451 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024900.692936
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 957451 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024900.692936
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 957451 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024900.692936
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 957451 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024902.148357
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 961461 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024902.148357
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 961461 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024902.148357
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 961462 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024902.148357
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 961462 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024902.148357
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 961462 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024902.148357
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 961462 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024902.337280
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 962174 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024902.337280
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 962174 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024902.337280
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 962174 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024902.337280
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 962174 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024902.337280
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 962174 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024902.337280
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 962174 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024909.758750
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.05182e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024909.758750
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.05182e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024909.758750
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.05182e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024909.758750
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.05182e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024909.758750
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.05182e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024909.758750
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.05182e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024909.758750
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.05182e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024909.758750
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.05182e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024918.080282
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.08522e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024918.080282
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.08522e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3024918.080282
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -90671.1 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3024918.080282
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -90671.1 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 276.19 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3024918.080282
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -90671.1 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 276.19 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3024918.080282
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -90671.1 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024918.080282
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.08522e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024918.080282
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.08522e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3024918.080282
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -90671.1 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 276.19 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3024918.080282
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -90671.1 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024918.080282
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.08522e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024918.080282
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.08522e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3024918.080282
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -90671.1 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 276.19 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3024918.080282
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -90671.1 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024918.080282
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.08522e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024918.080282
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.08522e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.1.0+maint.om/Media/package.mo:5917:7-5917:55:writable]
|                 | |       | The following assertion has been violated at time 3024918.080282
|                 | |       | ((pla.chiHea.sta_b1.p >= 0.0 and pla.chiHea.sta_b1.p <= 1e8)) --> "Variable violating min/max constraint: 0.0 <= pla.chiHea.sta_b1.p <= 1e8, has value: -90671.1"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.1.0+maint.om/Fluid/Interfaces.mo:15:5-15:79:writable]
|                 | |       | The following assertion has been violated at time 3024918.080282
|                 | |       | ((pla.chiHea.valCon[1].port_b.p >= 0.0 and pla.chiHea.valCon[1].port_b.p <= 1e8)) --> "Variable violating min/max constraint: 0.0 <= pla.chiHea.valCon[1].port_b.p <= 1e8, has value: -90671.1"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/MixingVolumes/BaseClasses/PartialMixingVolume.mo:47:3-48:28:writable]
|                 | |       | The following assertion has been violated at time 3024918.080282
|                 | |       | ((pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0 and pla.chiHea.junHeaWatConOut[1].vol.p <= 1e8)) --> "Variable violating min/max constraint: 0.0 <= pla.chiHea.junHeaWatConOut[1].vol.p <= 1e8, has value: -90671.1"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024919.038503
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.08753e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024919.038503
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.08753e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3024919.038503
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -108165 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3024919.038503
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -108165 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 276.17 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3024919.038503
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -108165 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 276.17 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3024919.038503
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -108165 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024919.038503
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.08753e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024919.038503
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.08753e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3024919.038503
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -108165 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 276.17 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3024919.038503
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -108165 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024919.038503
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.08753e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024919.038503
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.08753e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024927.874316
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.11167e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024927.874316
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.11167e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3024927.874316
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -312039 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3024927.874316
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -312039 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 275.994 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3024927.874316
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -312039 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 275.994 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3024927.874316
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -312039 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024927.874316
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.11167e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024927.874316
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.11167e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3024927.874316
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -312039 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 275.994 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3024927.874316
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -312039 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024927.874316
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.11167e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024927.874316
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.11167e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:311:3-315:28:writable]
|                 | |       | The following assertion has been violated at time 3024927.874316
|                 | |       | ((pla.pumChiWat.pum.eff.yMot >= 0.0)) --> "Variable violating min constraint: 0.0 <= pla.pumChiWat.pum.eff.yMot, has value: -8.32181e-38"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024930.000303
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.1587e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024930.000303
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.1587e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3024930.000303
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372224 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3024930.000303
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372224 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 275.952 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:311:3-315:28:writable]
|                 | |       | The following assertion has been violated at time 3024930.000303
|                 | |       | ((pla.pumConWatEva.pum.eff.yMot >= 0.0)) --> "Variable violating min constraint: 0.0 <= pla.pumConWatEva.pum.eff.yMot, has value: -4.34132e-37"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024930.000303
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.1587e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024930.000303
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.1587e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3024930.000303
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372224 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3024930.000303
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372224 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 275.952 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3024930.000303
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372224 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 275.952 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3024930.000303
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372224 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024930.000303
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.1587e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024930.000303
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.1587e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3024930.000303
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372224 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 275.952 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3024930.000303
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372224 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024930.000303
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.1587e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024930.000303
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.1587e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024930.000303
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.1587e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024930.000303
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.1587e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3024930.000303
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372224 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3024930.000303
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372224 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 275.952 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024994.923462
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.24955e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024994.923462
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.24955e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3024994.923462
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3024994.923462
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 274.872 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3024994.923462
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 274.872 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3024994.923462
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024994.923462
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.24955e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024994.923462
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.24955e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3024994.923462
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 274.872 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3024994.923462
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024994.923462
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.24955e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3024994.923462
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.24955e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025021.679389
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.26911e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025021.679389
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.26911e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025021.679389
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025021.679389
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 274.545 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025021.679389
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.26911e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025021.679389
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.26911e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025021.679389
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025021.679389
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 274.545 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025021.679389
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 274.545 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025021.679389
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025021.679389
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.26911e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025021.679389
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.26911e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025021.679389
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 274.545 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025021.679389
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025021.679389
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.26911e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025021.679389
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.26911e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025021.679389
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.26911e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025021.679389
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.26911e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025021.679389
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025021.679389
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 274.545 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025036.800000
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.277e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025036.800000
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.277e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025036.800000
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025036.800000
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 274.387 K)"
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025080.000000
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.29958e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025080.000000
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.29958e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025080.000000
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025080.000000
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 274.024 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025080.000000
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.29958e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025080.000000
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.29958e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025080.000000
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025080.000000
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 274.024 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025080.000000
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 274.024 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025080.000000
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025080.000000
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.29958e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025080.000000
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.29958e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025080.000000
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 274.024 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025080.000000
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025080.000000
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.29958e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025080.000000
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.29958e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025080.000000
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.29958e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025080.000000
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.29958e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025080.000000
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025080.000000
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 274.024 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025200.000303
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.35388e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025200.000303
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.35388e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025200.000303
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025200.000303
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.472 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025200.000303
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.35388e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025200.000303
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.35388e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025200.000303
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025200.000303
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.472 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025200.000303
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.472 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025200.000303
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025200.000303
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.35388e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025200.000303
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.35388e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025200.000303
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.472 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025200.000303
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025200.000303
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.35388e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025200.000303
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.35388e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025200.000303
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.35388e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025200.000303
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.35388e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025200.000303
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025200.000303
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.472 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025200.140006
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.35393e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025200.140006
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.35393e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025200.140006
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025200.140006
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.472 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025200.140006
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.35393e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025200.140006
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.35393e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025200.140006
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025200.140006
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.472 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025200.140006
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.472 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025200.140006
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025200.140006
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.35393e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025200.140006
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.35393e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025200.140006
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.472 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025200.140006
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025200.140006
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.35393e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025200.140006
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.35393e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025200.140006
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.35393e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025200.140006
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.35393e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025200.140006
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025200.140006
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.472 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025209.600000
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.35726e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025209.600000
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.35726e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025209.600000
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025209.600000
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.447 K)"
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025209.758750
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.35731e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025209.758750
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.35731e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025209.758750
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025209.758750
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.447 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025209.758750
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.35731e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025209.758750
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.35731e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025209.758750
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025209.758750
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.447 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025209.758750
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.447 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025209.758750
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025209.758750
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.35731e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025209.758750
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.35731e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025209.758750
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.447 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025209.758750
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025209.758750
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.35731e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025209.758750
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.35731e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025209.758750
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.447 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025209.758750
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025209.758750
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.35731e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025209.758750
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.35731e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025209.758750
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.447 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025209.758750
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025209.758750
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.35731e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025209.758750
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.35731e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025209.758750
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.35731e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025209.758750
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.35731e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025209.758750
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025209.758750
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.447 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025218.080282
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.36016e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025218.080282
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.36016e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025218.080282
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025218.080282
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.426 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025218.080282
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.36016e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025218.080282
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.36016e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025218.080282
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025218.080282
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.426 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025218.080282
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.426 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025218.080282
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025218.080282
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.36016e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025218.080282
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.36016e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025218.080282
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.426 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025218.080282
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025218.080282
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.36016e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025218.080282
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.36016e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025218.080282
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.426 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025218.080282
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025218.080282
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.36016e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025218.080282
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.36016e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025218.080282
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.426 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025218.080282
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025218.080282
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.36016e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025218.080282
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.36016e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025218.080282
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.36016e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025218.080282
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.36016e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025218.080282
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025218.080282
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.426 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025239.758750
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.36739e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025239.758750
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.36739e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025239.758750
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025239.758750
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.38 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025239.758750
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.36739e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025239.758750
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.36739e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025239.758750
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025239.758750
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.38 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025239.758750
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.38 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025239.758750
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025239.758750
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.36739e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025239.758750
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.36739e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025239.758750
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.38 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025239.758750
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025239.758750
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.36739e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025239.758750
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.36739e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025239.758750
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.36739e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025239.758750
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.36739e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025239.758750
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025239.758750
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.38 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025248.080282
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.36997e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025248.080282
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.36997e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025248.080282
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025248.080282
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.364 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025248.080282
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.36997e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025248.080282
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.36997e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025248.080282
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025248.080282
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.364 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025248.080282
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.364 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025248.080282
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025248.080282
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.36997e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025248.080282
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.36997e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025248.080282
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.364 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025248.080282
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025248.080282
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.36997e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025248.080282
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.36997e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025248.080282
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.36997e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025248.080282
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.36997e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025248.080282
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025248.080282
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.364 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025382.400000
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.4104e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025382.400000
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.4104e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025382.400000
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025382.400000
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.216 K)"
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025500.000303
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.44594e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025500.000303
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.44594e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025500.000303
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025500.000303
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.173 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025500.000303
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.44594e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025500.000303
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.44594e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025500.000303
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025500.000303
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.173 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025500.000303
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.173 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025500.000303
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025500.000303
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.44594e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025500.000303
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.44594e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025500.000303
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.173 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025500.000303
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025500.000303
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.44594e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025500.000303
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.44594e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025500.000303
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.173 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025500.000303
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025500.000303
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.44594e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025500.000303
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.44594e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025500.000303
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.173 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025500.000303
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025500.000303
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.44594e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025500.000303
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.44594e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025500.000303
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.44594e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025500.000303
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.44594e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025500.000303
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025500.000303
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.173 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025530.000303
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.45004e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025530.000303
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.45004e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025530.000303
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025530.000303
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.168 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025530.000303
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.45004e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025530.000303
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.45004e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025530.000303
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025530.000303
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.168 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025530.000303
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.168 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025530.000303
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025530.000303
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.45004e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025530.000303
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.45004e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025530.000303
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.168 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025530.000303
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025530.000303
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.45004e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025530.000303
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.45004e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025530.000303
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.168 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025530.000303
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025530.000303
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.45004e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025530.000303
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.45004e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025530.000303
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.168 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025530.000303
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025530.000303
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.45004e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025530.000303
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.45004e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025530.000303
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.168 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025530.000303
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025530.000303
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.45004e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025530.000303
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.45004e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025530.000303
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.45004e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025530.000303
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.45004e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025530.000303
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025530.000303
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.168 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025555.200000
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.45239e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025555.200000
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.45239e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025555.200000
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025555.200000
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.164 K)"
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025560.000303
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.45284e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025560.000303
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.45284e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025560.000303
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025560.000303
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.163 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025560.000303
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.45284e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025560.000303
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.45284e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025560.000303
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025560.000303
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.163 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025560.000303
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.163 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025560.000303
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025560.000303
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.45284e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025560.000303
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.45284e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025560.000303
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.163 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025560.000303
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025560.000303
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.45284e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025560.000303
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.45284e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025560.000303
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.45284e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025560.000303
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.45284e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025560.000303
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025560.000303
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.163 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025728.000000
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.46761e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025728.000000
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.46761e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025728.000000
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025728.000000
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.153 K)"
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025800.000000
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.47401e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025800.000000
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.47401e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025800.000000
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025800.000000
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.151 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025800.000000
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.47401e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025800.000000
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.47401e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025800.000000
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025800.000000
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.151 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025800.000000
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.151 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025800.000000
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025800.000000
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.47401e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025800.000000
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.47401e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025800.000000
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.151 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025800.000000
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025800.000000
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.47401e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025800.000000
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.47401e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025800.000000
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.151 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025800.000000
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025800.000000
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.47401e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025800.000000
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.47401e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025800.000000
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.151 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025800.000000
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025800.000000
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.47401e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025800.000000
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.47401e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025800.000000
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.47401e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025800.000000
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.47401e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025800.000000
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025800.000000
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.151 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025800.000303
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.47401e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025800.000303
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.47401e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025800.000303
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025800.000303
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.151 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025800.000303
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.151 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025800.000303
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025800.000303
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.47401e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025800.000303
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.47401e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025800.000303
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.151 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025800.000303
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025800.000303
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.47401e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025800.000303
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.47401e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025800.000303
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.151 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025800.000303
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025800.000303
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.47401e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025800.000303
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.47401e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025900.800000
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.60102e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3025900.800000
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.60102e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025900.800000
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3025900.800000
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.151 K)"
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3026073.600000
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.83106e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3026073.600000
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.83106e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3026073.600000
|                 | |       | ((noEvent(pla.chiHea.sta_b1.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 293.15 K)"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable]
|                 | |       | The following assertion has been violated at time 3026073.600000
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[1].vol.p >= 0.0))) --> "Pressure (= -372555 Pa) of medium "Buildings.Media.Water" is negative
|                 | |       | (Temperature = 273.15 K)"
LOG_ASSERT        | error   | No event found, but assert was triggered. Throwing now!