Running: ./testmodel.py --libraries=/home/hudson/saved_omc/libraries/.openmodelica/libraries --ompython_omhome=/usr TransiEnt_TransiEnt.Components.Heat.Check.TestTurbineValveController.conf.json
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/DymolaCommands master/package.mo", uses=false) [Timeout 180]
"Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/DymolaCommands master/package.mo): time 0.000603/0.000603, allocations: 36.94 kB / 23.9 MB, free: 0.5898 MB / 18.57 MB
"
[Timeout remaining time 180]
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/package.mo", uses=false) [Timeout 180]
"[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Control/PredictorModels_3508/Check/package.mo:2:1-21:10:writable] Warning: The package.order file contains a class TestReheater, which is expected to be stored in file TestReheater.mo, but seems to be named testReheater.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Control/PredictorModels_3508/Check/testReheater.mo:2:1-117:17:writable] Warning: Expected the package to have name testReheater, but got TestReheater. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/package.mo:2:1-23:10:writable] Warning: PhysicalMills was referenced in the package.order file, but was not found in package.mo, PhysicalMills/package.mo or PhysicalMills.mo.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/package.mo:2:1-22:18:writable] Warning: Expected the package to have name physicalMills, but got PhysicalMills. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/package.mo:2:1-22:18:writable] Warning: The package.order file contains a class Mill_L4_advancedInit, which is expected to be stored in file Mill_L4_advancedInit.mo, but seems to be named mill_L4_advancedInit.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/package.mo:2:1-22:18:writable] Warning: The package.order file contains a class Mill_L4, which is expected to be stored in file Mill_L4.mo, but seems to be named mill_L4.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/mill_L4_advancedInit.mo:2:1-58:25:writable] Warning: Expected the package to have name mill_L4_advancedInit, but got Mill_L4_advancedInit. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/mill_L4_advancedInit.mo:2:1-58:25:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills; but got within ClaRa.Components.Mills.PhysicalMills; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/mill_L4.mo:2:1-315:12:writable] Warning: Expected the package to have name mill_L4, but got Mill_L4. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/mill_L4.mo:2:1-315:12:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills; but got within ClaRa.Components.Mills.PhysicalMills; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/package.mo:2:1-21:10:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills; but got within ClaRa.Components.Mills.PhysicalMills; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/package.mo:2:1-21:10:writable] Warning: The package.order file contains a class TestMillBox_2, which is expected to be stored in file TestMillBox_2.mo, but seems to be named testMillBox_2.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/package.mo:2:1-21:10:writable] Warning: The package.order file contains a class TestMillBox_1_measurementInput, which is expected to be stored in file TestMillBox_1_measurementInput.mo, but seems to be named testMillBox_1_measurementInput.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/package.mo:2:1-21:10:writable] Warning: The package.order file contains a class TestMillBox_1, which is expected to be stored in file TestMillBox_1.mo, but seems to be named testMillBox_1.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/testMillBox_2.mo:2:1-297:18:writable] Warning: Expected the package to have name testMillBox_2, but got TestMillBox_2. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/testMillBox_2.mo:2:1-297:18:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Check; but got within ClaRa.Components.Mills.PhysicalMills.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/testMillBox_1_measurementInput.mo:2:1-1342:35:writable] Warning: Expected the package to have name testMillBox_1_measurementInput, but got TestMillBox_1_measurementInput. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/testMillBox_1_measurementInput.mo:2:1-1342:35:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Check; but got within ClaRa.Components.Mills.PhysicalMills.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/testMillBox_1.mo:2:1-465:18:writable] Warning: Expected the package to have name testMillBox_1, but got TestMillBox_1. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/testMillBox_1.mo:2:1-465:18:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Check; but got within ClaRa.Components.Mills.PhysicalMills.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/package.mo:2:1-29:12:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills; but got within ClaRa.Components.Mills.PhysicalMills; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/FlowClassifier.mo:2:1-346:19:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/CentrifugalClassifier.mo:2:1-380:26:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/GrinderRingRoller.mo:2:1-294:22:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/FuelJoin_distributed.mo:2:1-133:25:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Dryer.mo:2:1-301:10:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/package.mo:2:1-20:17:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/package.mo:2:1-20:13:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Transport_Velocity/package.mo:2:1-20:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Transport_Velocity/Transport_complex.mo:2:1-71:22:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Transport_Velocity/Transport_constant.mo:2:1-49:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Transport_Velocity/Transport_base.mo:2:1-52:19:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Selection_Function/package.mo:2:1-20:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Selection_Function/Selection_Kersting.mo:2:1-80:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Selection_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Selection_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Selection_Function/Selection_Steinmetz.mo:2:1-104:24:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Selection_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Selection_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Selection_Function/Selection_constant.mo:2:1-45:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Selection_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Selection_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Selection_Function/Selection_base.mo:2:1-50:19:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Selection_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Selection_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Breakage_Function/package.mo:2:1-20:22:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Breakage_Function/Breakage_Austin.mo:2:1-109:20:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Breakage_Function/Breakage_Steinmetz.mo:2:1-106:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Breakage_Function/Breakage_constant.mo:2:1-45:22:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Breakage_Function/Breakage_base.mo:2:1-51:18:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Drying/package.mo:2:1-20:11:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Drying/Drying_ideal.mo:2:1-58:17:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Drying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Drying; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Drying/Drying_base.mo:2:1-44:16:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Drying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Drying; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Classifying/package.mo:2:1-20:16:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Classifying/Classifying_flow.mo:2:1-111:21:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Classifying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Classifying; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Classifying/Classifying_centrifugal.mo:2:1-153:28:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Classifying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Classifying; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Classifying/Classifying_centrifugal_base.mo:2:1-45:33:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Classifying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Classifying; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Classifying/Classifying_flow_base.mo:2:1-45:26:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Classifying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Classifying; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/package.mo:2:1-20:12:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/iCom_Dryer.mo:2:1-57:15:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/iCom_FlowClassifier.mo:2:1-67:24:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/iCom_CentrifugalClassifier.mo:2:1-69:31:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/iCom_Grinder.mo:2:1-61:17:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/FuelClassification_example_21classes.mo:2:1-43:41:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/GeometricProgression.mo:2:1-56:25:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/FuelClassification_generic.mo:2:1-43:31:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/FuelClassification_example_05classes.mo:2:1-43:41:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/FuelClassification_example_11classes.mo:2:1-43:41:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/FuelClassification_base.mo:2:1-61:28:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/package.mo:2:1-23:10:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/package.mo:2:1-23:10:writable] Warning: The package.order file contains a class TestFuelJoin, which is expected to be stored in file TestFuelJoin.mo, but seems to be named testFuelJoin.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/package.mo:2:1-23:10:writable] Warning: The package.order file contains a class TestAerosolVolume, which is expected to be stored in file TestAerosolVolume.mo, but seems to be named testAerosolVolume.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/package.mo:2:1-23:10:writable] Warning: The package.order file contains a class TestDryer, which is expected to be stored in file TestDryer.mo, but seems to be named testDryer.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/package.mo:2:1-23:10:writable] Warning: The package.order file contains a class TestGrinder, which is expected to be stored in file TestGrinder.mo, but seems to be named testGrinder.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testFuelJoin.mo:2:1-93:17:writable] Warning: Expected the package to have name testFuelJoin, but got TestFuelJoin. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testFuelJoin.mo:2:1-93:17:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Check; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testAerosolVolume.mo:2:1-176:22:writable] Warning: Expected the package to have name testAerosolVolume, but got TestAerosolVolume. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testAerosolVolume.mo:2:1-176:22:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Check; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testDryer.mo:2:1-93:14:writable] Warning: Expected the package to have name testDryer, but got TestDryer. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testDryer.mo:2:1-93:14:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Check; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testGrinder.mo:2:1-154:16:writable] Warning: Expected the package to have name testGrinder, but got TestGrinder. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testGrinder.mo:2:1-154:16:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Check; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/package.mo): time 0.6108/0.6108, allocations: 100.7 MB / 127.8 MB, free: 164 kB / 106.8 MB
"
[Timeout remaining time 179]
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.1.0+maint.om/package.mo", uses=false) [Timeout 180]
"Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.1.0+maint.om/package.mo): time 0.0009985/0.0009985, allocations: 88.23 kB / 158.9 MB, free: 1.246 MB / 138.8 MB
"
[Timeout remaining time 180]
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.1.0+maint.om/package.mo", uses=false) [Timeout 180]
"Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.1.0+maint.om/package.mo): time 0.0009699/0.0009699, allocations: 165.8 kB / 162.4 MB, free: 13.82 MB / 154.8 MB
"
[Timeout remaining time 180]
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.1.0+maint.om/package.mo", uses=false) [Timeout 180]
"Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.1.0+maint.om/package.mo): time 1.016/1.016, allocations: 177.1 MB / 342.8 MB, free: 11.59 MB / 314.8 MB
"
[Timeout remaining time 179]
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.2/package.mo", uses=false) [Timeout 180]
"Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.2/package.mo): time 2.083/2.083, allocations: 376.9 MB / 0.758 GB, free: 15.45 MB / 0.7137 GB
"
[Timeout remaining time 178]
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt master/package.mo", uses=false) [Timeout 180]
"[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt master/Basics/Interfaces/Thermal/package.mo:2:1-91:12:writable] Warning: The package.order file contains a class FluidPortOut_simple, which is expected to be stored in file FluidPortOut_simple.mo, but seems to be named fluidPortOut_simple.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt master/Basics/Interfaces/Thermal/package.mo:2:1-91:12:writable] Warning: The package.order file contains a class FluidPortIn_simple, which is expected to be stored in file FluidPortIn_simple.mo, but seems to be named fluidPortIn_simple.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt master/Basics/Interfaces/Thermal/fluidPortOut_simple.mo:2:1-49:24:writable] Warning: Expected the package to have name fluidPortOut_simple, but got FluidPortOut_simple. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt master/Basics/Interfaces/Thermal/fluidPortIn_simple.mo:2:1-50:23:writable] Warning: Expected the package to have name fluidPortIn_simple, but got FluidPortIn_simple. Proceeding since only the case of the names are different.
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt master/package.mo): time 1.941/1.941, allocations: 241.3 MB / 1.117 GB, free: 10.21 MB / 1.042 GB
"
[Timeout remaining time 178]
Using package TransiEnt with version 2.0.3 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt master/package.mo)
Using package Buildings with version 12.1.2 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.2/package.mo)
Using package Modelica with version 4.1.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.1.0+maint.om/package.mo)
Using package Complex with version 4.1.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.1.0+maint.om/package.mo)
Using package ModelicaServices with version 4.1.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.1.0+maint.om/package.mo)
Using package ClaRa with version 1.8.1 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/package.mo)
Using package DymolaCommands with version 0.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/DymolaCommands master/package.mo)
Running command: translateModel(TransiEnt.Components.Heat.Check.TestTurbineValveController,tolerance=1e-06,outputFormat="empty",numberOfIntervals=2500,variableFilter="",fileNamePrefix="TransiEnt_TransiEnt.Components.Heat.Check.TestTurbineValveController")
translateModel(TransiEnt.Components.Heat.Check.TestTurbineValveController,tolerance=1e-06,outputFormat="empty",numberOfIntervals=2500,variableFilter="",fileNamePrefix="TransiEnt_TransiEnt.Components.Heat.Check.TestTurbineValveController") [Timeout 660]
"Notification: Performance of FrontEnd - loaded program: time 1.492e-06/1.492e-06, allocations: 0 / 1.207 GB, free: 14.38 MB / 1.136 GB
Notification: Performance of FrontEnd - Absyn->SCode: time 2.37e-05/2.519e-05, allocations: 6.25 kB / 1.207 GB, free: 14.37 MB / 1.136 GB
Notification: Performance of NFInst.instantiate(TransiEnt.Components.Heat.Check.TestTurbineValveController): time 0.003018/0.003043, allocations: 2.587 MB / 1.209 GB, free: 11.77 MB / 1.136 GB
Notification: Performance of NFInst.instExpressions: time 0.001362/0.004405, allocations: 1.005 MB / 1.21 GB, free: 10.76 MB / 1.136 GB
Notification: Performance of NFInst.updateImplicitVariability: time 0.0001303/0.004536, allocations: 3.938 kB / 1.21 GB, free: 10.75 MB / 1.136 GB
Notification: Performance of NFTyping.typeComponents: time 0.0004111/0.004947, allocations: 263 kB / 1.21 GB, free: 10.5 MB / 1.136 GB
Notification: Performance of NFTyping.typeBindings: time 0.000494/0.005441, allocations: 310.7 kB / 1.211 GB, free: 10.19 MB / 1.136 GB
Notification: Performance of NFTyping.typeClassSections: time 0.0008162/0.006257, allocations: 0.5107 MB / 1.211 GB, free: 9.68 MB / 1.136 GB
Notification: Performance of NFFlatten.flatten: time 0.000525/0.006782, allocations: 494.6 kB / 1.212 GB, free: 9.195 MB / 1.136 GB
Notification: Performance of NFFlatten.resolveConnections: time 0.0001395/0.006922, allocations: 45.19 kB / 1.212 GB, free: 9.148 MB / 1.136 GB
Notification: Performance of NFEvalConstants.evaluate: time 0.00027/0.007192, allocations: 235.3 kB / 1.212 GB, free: 8.918 MB / 1.136 GB
Notification: Performance of NFSimplifyModel.simplify: time 0.0001714/0.007363, allocations: 175.5 kB / 1.212 GB, free: 8.746 MB / 1.136 GB
Notification: Performance of NFPackage.collectConstants: time 3.035e-05/0.007393, allocations: 16 kB / 1.212 GB, free: 8.73 MB / 1.136 GB
Notification: Performance of NFFlatten.collectFunctions: time 9.432e-05/0.007488, allocations: 47.88 kB / 1.212 GB, free: 8.684 MB / 1.136 GB
Notification: Performance of NFScalarize.scalarize: time 9.129e-05/0.007579, allocations: 103.5 kB / 1.212 GB, free: 8.582 MB / 1.136 GB
Notification: Performance of NFVerifyModel.verify: time 0.000339/0.007918, allocations: 67.66 kB / 1.212 GB, free: 8.516 MB / 1.136 GB
Notification: Performance of NFConvertDAE.convert: time 0.0002824/0.0082, allocations: 258.8 kB / 1.212 GB, free: 8.262 MB / 1.136 GB
Notification: Performance of FrontEnd - DAE generated: time 2.866e-06/0.008203, allocations: 0 / 1.212 GB, free: 8.262 MB / 1.136 GB
Notification: Performance of FrontEnd: time 1.302e-06/0.008205, allocations: 0 / 1.212 GB, free: 8.262 MB / 1.136 GB
Notification: Performance of Transformations before backend: time 5.309e-06/0.00821, allocations: 0 / 1.212 GB, free: 8.262 MB / 1.136 GB
Notification: Model statistics after passing the front-end and creating the data structures used by the back-end:
 * Number of equations: 19
 * Number of variables: 19
Notification: Performance of Generate backend data structure: time 0.0005641/0.008774, allocations: 0.6227 MB / 1.213 GB, free: 7.613 MB / 1.136 GB
Notification: Performance of prepare preOptimizeDAE: time 3.638e-05/0.00881, allocations: 8.031 kB / 1.213 GB, free: 7.605 MB / 1.136 GB
Notification: Performance of preOpt normalInlineFunction (simulation): time 5.946e-05/0.00887, allocations: 28.91 kB / 1.213 GB, free: 7.578 MB / 1.136 GB
Notification: Performance of preOpt evaluateParameters (simulation): time 0.0003164/0.009186, allocations: 321.8 kB / 1.213 GB, free: 7.238 MB / 1.136 GB
Notification: Performance of preOpt simplifyIfEquations (simulation): time 1.263e-05/0.009199, allocations: 12.38 kB / 1.213 GB, free: 7.227 MB / 1.136 GB
Notification: Performance of preOpt expandDerOperator (simulation): time 1.443e-05/0.009213, allocations: 4.375 kB / 1.213 GB, free: 7.223 MB / 1.136 GB
Notification: Performance of preOpt clockPartitioning (simulation): time 0.0001456/0.009359, allocations: 86.91 kB / 1.214 GB, free: 7.129 MB / 1.136 GB
Notification: Performance of preOpt findStateOrder (simulation): time 9.107e-06/0.009368, allocations: 4.172 kB / 1.214 GB, free: 7.125 MB / 1.136 GB
Notification: Performance of preOpt replaceEdgeChange (simulation): time 1.007e-05/0.009378, allocations: 8.125 kB / 1.214 GB, free: 7.117 MB / 1.136 GB
Notification: Performance of preOpt inlineArrayEqn (simulation): time 7.114e-06/0.009385, allocations: 4 kB / 1.214 GB, free: 7.113 MB / 1.136 GB
Notification: Performance of preOpt removeEqualRHS (simulation): time 3.968e-05/0.009425, allocations: 18.73 kB / 1.214 GB, free: 7.098 MB / 1.136 GB
Notification: Performance of preOpt removeSimpleEquations (simulation): time 0.0004075/0.009832, allocations: 270.7 kB / 1.214 GB, free: 6.816 MB / 1.136 GB
Notification: Performance of preOpt comSubExp (simulation): time 6.583e-05/0.009898, allocations: 34.52 kB / 1.214 GB, free: 6.773 MB / 1.136 GB
Notification: Performance of preOpt resolveLoops (simulation): time 2.584e-05/0.009924, allocations: 16.84 kB / 1.214 GB, free: 6.754 MB / 1.136 GB
Notification: Performance of preOpt evalFunc (simulation): time 2.601e-05/0.00995, allocations: 8 kB / 1.214 GB, free: 6.746 MB / 1.136 GB
Notification: Performance of preOpt encapsulateWhenConditions (simulation): time 2.424e-05/0.009974, allocations: 30.56 kB / 1.214 GB, free: 6.707 MB / 1.136 GB
Notification: Performance of pre-optimization done (n=7): time 1.823e-06/0.009976, allocations: 0 / 1.214 GB, free: 6.707 MB / 1.136 GB
Notification: Performance of matching and sorting (n=7): time 0.0001419/0.01012, allocations: 77.8 kB / 1.214 GB, free: 6.625 MB / 1.136 GB
Notification: Performance of inlineWhenForInitialization (initialization): time 3.091e-05/0.01015, allocations: 59.28 kB / 1.214 GB, free: 6.555 MB / 1.136 GB
Notification: Performance of selectInitializationVariablesDAE (initialization): time 0.0003382/0.01049, allocations: 481 kB / 1.214 GB, free: 6.07 MB / 1.136 GB
Notification: Performance of collectPreVariables (initialization): time 1.388e-05/0.0105, allocations: 29.69 kB / 1.215 GB, free: 6.035 MB / 1.136 GB
Notification: Performance of collectInitialEqns (initialization): time 7.551e-05/0.01058, allocations: 161.2 kB / 1.215 GB, free: 5.871 MB / 1.136 GB
Notification: Performance of collectInitialBindings (initialization): time 2.459e-05/0.0106, allocations: 31.73 kB / 1.215 GB, free: 5.84 MB / 1.136 GB
Notification: Performance of simplifyInitialFunctions (initialization): time 3.01e-05/0.01063, allocations: 17.72 kB / 1.215 GB, free: 5.816 MB / 1.136 GB
Notification: Performance of setup shared object (initialization): time 0.0001104/0.01074, allocations: 370.6 kB / 1.215 GB, free: 5.445 MB / 1.136 GB
Notification: Performance of preBalanceInitialSystem (initialization): time 1.698e-05/0.01076, allocations: 4 kB / 1.215 GB, free: 5.441 MB / 1.136 GB
Notification: Performance of partitionIndependentBlocks (initialization): time 1.568e-05/0.01077, allocations: 7.984 kB / 1.215 GB, free: 5.434 MB / 1.136 GB
Notification: Performance of analyzeInitialSystem (initialization): time 4.33e-05/0.01082, allocations: 27.66 kB / 1.215 GB, free: 5.402 MB / 1.136 GB
Notification: Performance of solveInitialSystemEqSystem (initialization): time 1.793e-06/0.01082, allocations: 0 / 1.215 GB, free: 5.402 MB / 1.136 GB
Notification: Performance of matching and sorting (n=7) (initialization): time 8.26e-05/0.0109, allocations: 74.06 kB / 1.215 GB, free: 5.324 MB / 1.136 GB
Notification: Performance of prepare postOptimizeDAE: time 1.083e-05/0.01091, allocations: 4 kB / 1.215 GB, free: 5.32 MB / 1.136 GB
Notification: Performance of postOpt simplifyComplexFunction (initialization): time 3.938e-06/0.01092, allocations: 0 / 1.215 GB, free: 5.32 MB / 1.136 GB
Notification: Performance of postOpt tearingSystem (initialization): time 1.035e-05/0.01093, allocations: 0 / 1.215 GB, free: 5.32 MB / 1.136 GB
Notification: Performance of postOpt solveSimpleEquations (initialization): time 7.071e-05/0.011, allocations: 15.98 kB / 1.215 GB, free: 5.305 MB / 1.136 GB
Notification: Performance of postOpt calculateStrongComponentJacobians (initialization): time 3.586e-06/0.011, allocations: 4.062 kB / 1.215 GB, free: 5.301 MB / 1.136 GB
Notification: Performance of postOpt simplifyAllExpressions (initialization): time 3.505e-05/0.01104, allocations: 8 kB / 1.215 GB, free: 5.293 MB / 1.136 GB
Notification: Performance of postOpt collapseArrayExpressions (initialization): time 5e-06/0.01104, allocations: 0 / 1.215 GB, free: 5.293 MB / 1.136 GB
Notification: Model statistics after passing the back-end for initialization:
 * Number of independent subsystems: 1
 * Number of states: 0 ()
 * Number of discrete variables: 0 ()
 * Number of discrete states: 0 ()
 * Number of clocked states: 0 ()
 * Top-level inputs: 0
Notification: Strong component statistics for initialization (7):
 * Single equations (assignments): 7
 * Array equations: 0
 * Algorithm blocks: 0
 * Record equations: 0
 * When equations: 0
 * If-equations: 0
 * Equation systems (not torn): 0
 * Torn equation systems: 0
 * Mixed (continuous/discrete) equation systems: 0
Notification: Performance of prepare postOptimizeDAE: time 7.744e-05/0.01112, allocations: 120.6 kB / 1.215 GB, free: 5.164 MB / 1.136 GB
Notification: Performance of postOpt lateInlineFunction (simulation): time 3.117e-05/0.01115, allocations: 23.97 kB / 1.215 GB, free: 5.141 MB / 1.136 GB
Notification: Performance of postOpt wrapFunctionCalls (simulation): time 0.0001372/0.01129, allocations: 109.7 kB / 1.215 GB, free: 5.023 MB / 1.136 GB
Notification: Performance of postOpt inlineArrayEqn (simulation): time 1.933e-06/0.01129, allocations: 0 / 1.215 GB, free: 5.023 MB / 1.136 GB
Notification: Performance of postOpt constantLinearSystem (simulation): time 1.393e-06/0.01129, allocations: 0 / 1.215 GB, free: 5.023 MB / 1.136 GB
Notification: Performance of postOpt simplifysemiLinear (simulation): time 2.645e-06/0.01129, allocations: 0 / 1.215 GB, free: 5.023 MB / 1.136 GB
Notification: Performance of postOpt removeSimpleEquations (simulation): time 0.0001718/0.01146, allocations: 169.6 kB / 1.216 GB, free: 4.84 MB / 1.136 GB
Notification: Performance of postOpt simplifyComplexFunction (simulation): time 1.233e-06/0.01147, allocations: 0 / 1.216 GB, free: 4.84 MB / 1.136 GB
Notification: Performance of postOpt solveSimpleEquations (simulation): time 3.85e-05/0.0115, allocations: 19.98 kB / 1.216 GB, free: 4.82 MB / 1.136 GB
Notification: Performance of postOpt tearingSystem (simulation): time 1.473e-06/0.01151, allocations: 0 / 1.216 GB, free: 4.82 MB / 1.136 GB
Notification: Performance of postOpt inputDerivativesUsed (simulation): time 5.28e-06/0.01151, allocations: 0 / 1.216 GB, free: 4.82 MB / 1.136 GB
Notification: Performance of postOpt calculateStrongComponentJacobians (simulation): time 2.835e-06/0.01151, allocations: 4 kB / 1.216 GB, free: 4.816 MB / 1.136 GB
Notification: Performance of postOpt calculateStateSetsJacobians (simulation): time 7.72e-07/0.01152, allocations: 0 / 1.216 GB, free: 4.816 MB / 1.136 GB
Notification: Performance of postOpt symbolicJacobian (simulation): time 0.0001125/0.01163, allocations: 179.4 kB / 1.216 GB, free: 4.625 MB / 1.136 GB
Notification: Performance of postOpt removeConstants (simulation): time 3.252e-05/0.01166, allocations: 35.72 kB / 1.216 GB, free: 4.59 MB / 1.136 GB
Notification: Performance of postOpt simplifyTimeIndepFuncCalls (simulation): time 1.882e-05/0.01168, allocations: 4 kB / 1.216 GB, free: 4.586 MB / 1.136 GB
Notification: Performance of postOpt simplifyAllExpressions (simulation): time 4.445e-05/0.01172, allocations: 0 / 1.216 GB, free: 4.586 MB / 1.136 GB
Notification: Performance of postOpt findZeroCrossings (simulation): time 2.831e-05/0.01175, allocations: 15.92 kB / 1.216 GB, free: 4.57 MB / 1.136 GB
Notification: Performance of postOpt collapseArrayExpressions (simulation): time 3.677e-06/0.01176, allocations: 0 / 1.216 GB, free: 4.57 MB / 1.136 GB
Notification: Performance of sorting global known variables: time 0.0001769/0.01193, allocations: 235.2 kB / 1.216 GB, free: 4.34 MB / 1.136 GB
Notification: Performance of sort global known variables: time 6e-08/0.01193, allocations: 0 / 1.216 GB, free: 4.34 MB / 1.136 GB
Notification: Performance of remove unused functions: time 0.0001613/0.01209, allocations: 39.89 kB / 1.216 GB, free: 4.301 MB / 1.136 GB
Notification: Model statistics after passing the back-end for simulation:
 * Number of independent subsystems: 1
 * Number of states: 0 ()
 * Number of discrete variables: 0 ()
 * Number of discrete states: 0 ()
 * Number of clocked states: 0 ()
 * Top-level inputs: 0
Notification: Strong component statistics for simulation (7):
 * Single equations (assignments): 7
 * Array equations: 0
 * Algorithm blocks: 0
 * Record equations: 0
 * When equations: 0
 * If-equations: 0
 * Equation systems (not torn): 0
 * Torn equation systems: 0
 * Mixed (continuous/discrete) equation systems: 0
Notification: Performance of Backend phase and start with SimCode phase: time 0.0009335/0.01303, allocations: 433.5 kB / 1.217 GB, free: 4.07 MB / 1.136 GB
Notification: Performance of simCode: created initialization part: time 7.734e-05/0.0131, allocations: 36.83 kB / 1.217 GB, free: 4.031 MB / 1.136 GB
Notification: Performance of simCode: created event and clocks part: time 6.742e-06/0.01311, allocations: 4 kB / 1.217 GB, free: 4.027 MB / 1.136 GB
Notification: Performance of simCode: created simulation system equations: time 2.326e-05/0.01313, allocations: 24.77 kB / 1.217 GB, free: 4 MB / 1.136 GB
Notification: Performance of simCode: created of all other equations (e.g. parameter, nominal, assert, etc): time 0.0003186/0.01345, allocations: 117.4 kB / 1.217 GB, free: 3.887 MB / 1.136 GB
Notification: Performance of simCode: created linear, non-linear and system jacobian parts: time 0.0006553/0.01411, allocations: 0.5859 MB / 1.217 GB, free: 3.27 MB / 1.136 GB
Notification: Performance of simCode: some other stuff during SimCode phase: time 7.279e-05/0.01418, allocations: 112.3 kB / 1.217 GB, free: 3.141 MB / 1.136 GB
Notification: Performance of simCode: alias equations: time 8.958e-05/0.01427, allocations: 50.55 kB / 1.217 GB, free: 3.094 MB / 1.136 GB
Notification: Performance of simCode: all other stuff during SimCode phase: time 0.0001247/0.0144, allocations: 107.3 kB / 1.218 GB, free: 2.988 MB / 1.136 GB
Notification: Performance of SimCode: time 6.62e-07/0.0144, allocations: 0 / 1.218 GB, free: 2.988 MB / 1.136 GB
Notification: Performance of Templates: time 0.006843/0.02124, allocations: 3.983 MB / 1.221 GB, free: 15.07 MB / 1.151 GB
"
[Timeout remaining time 660]
make -j1 -f TransiEnt_TransiEnt.Components.Heat.Check.TestTurbineValveController.makefile [Timeout 660]
(rm -f TransiEnt_TransiEnt.Components.Heat.Check.TestTurbineValveController.pipe ; mkfifo TransiEnt_TransiEnt.Components.Heat.Check.TestTurbineValveController.pipe ; head -c 1048576 < TransiEnt_TransiEnt.Components.Heat.Check.TestTurbineValveController.pipe >> ../files/TransiEnt_TransiEnt.Components.Heat.Check.TestTurbineValveController.sim & ./TransiEnt_TransiEnt.Components.Heat.Check.TestTurbineValveController -abortSlowSimulation -alarm=240  -lv LOG_STATS > TransiEnt_TransiEnt.Components.Heat.Check.TestTurbineValveController.pipe 2>&1) [Timeout 240]
[Calling sys.exit(0), Time elapsed: 8.054936538916081]