Running: ./testmodel.py --libraries=/home/hudson/saved_omc/libraries/.openmodelica/libraries --ompython_omhome=/usr TransiEnt_TransiEnt.Basics.Blocks.Check.TestDiscreteTimeSlewRateLimiter.conf.json
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/DymolaCommands master/package.mo", uses=false) [Timeout 180]
"Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/DymolaCommands master/package.mo): time 0.0005783/0.0005783, allocations: 37.06 kB / 23.9 MB, free: 0.5938 MB / 18.57 MB
"
[Timeout remaining time 180]
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/package.mo", uses=false) [Timeout 180]
"[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Control/PredictorModels_3508/Check/package.mo:2:1-21:10:writable] Warning: The package.order file contains a class TestReheater, which is expected to be stored in file TestReheater.mo, but seems to be named testReheater.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Control/PredictorModels_3508/Check/testReheater.mo:2:1-117:17:writable] Warning: Expected the package to have name testReheater, but got TestReheater. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/package.mo:2:1-23:10:writable] Warning: PhysicalMills was referenced in the package.order file, but was not found in package.mo, PhysicalMills/package.mo or PhysicalMills.mo.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/package.mo:2:1-22:18:writable] Warning: Expected the package to have name physicalMills, but got PhysicalMills. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/package.mo:2:1-22:18:writable] Warning: The package.order file contains a class Mill_L4_advancedInit, which is expected to be stored in file Mill_L4_advancedInit.mo, but seems to be named mill_L4_advancedInit.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/package.mo:2:1-22:18:writable] Warning: The package.order file contains a class Mill_L4, which is expected to be stored in file Mill_L4.mo, but seems to be named mill_L4.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/mill_L4_advancedInit.mo:2:1-58:25:writable] Warning: Expected the package to have name mill_L4_advancedInit, but got Mill_L4_advancedInit. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/mill_L4_advancedInit.mo:2:1-58:25:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills; but got within ClaRa.Components.Mills.PhysicalMills; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/mill_L4.mo:2:1-315:12:writable] Warning: Expected the package to have name mill_L4, but got Mill_L4. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/mill_L4.mo:2:1-315:12:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills; but got within ClaRa.Components.Mills.PhysicalMills; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/package.mo:2:1-21:10:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills; but got within ClaRa.Components.Mills.PhysicalMills; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/package.mo:2:1-21:10:writable] Warning: The package.order file contains a class TestMillBox_2, which is expected to be stored in file TestMillBox_2.mo, but seems to be named testMillBox_2.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/package.mo:2:1-21:10:writable] Warning: The package.order file contains a class TestMillBox_1_measurementInput, which is expected to be stored in file TestMillBox_1_measurementInput.mo, but seems to be named testMillBox_1_measurementInput.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/package.mo:2:1-21:10:writable] Warning: The package.order file contains a class TestMillBox_1, which is expected to be stored in file TestMillBox_1.mo, but seems to be named testMillBox_1.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/testMillBox_2.mo:2:1-297:18:writable] Warning: Expected the package to have name testMillBox_2, but got TestMillBox_2. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/testMillBox_2.mo:2:1-297:18:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Check; but got within ClaRa.Components.Mills.PhysicalMills.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/testMillBox_1_measurementInput.mo:2:1-1342:35:writable] Warning: Expected the package to have name testMillBox_1_measurementInput, but got TestMillBox_1_measurementInput. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/testMillBox_1_measurementInput.mo:2:1-1342:35:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Check; but got within ClaRa.Components.Mills.PhysicalMills.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/testMillBox_1.mo:2:1-465:18:writable] Warning: Expected the package to have name testMillBox_1, but got TestMillBox_1. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/testMillBox_1.mo:2:1-465:18:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Check; but got within ClaRa.Components.Mills.PhysicalMills.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/package.mo:2:1-29:12:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills; but got within ClaRa.Components.Mills.PhysicalMills; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/FlowClassifier.mo:2:1-346:19:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/CentrifugalClassifier.mo:2:1-380:26:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/GrinderRingRoller.mo:2:1-294:22:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/FuelJoin_distributed.mo:2:1-133:25:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Dryer.mo:2:1-301:10:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/package.mo:2:1-20:17:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/package.mo:2:1-20:13:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Transport_Velocity/package.mo:2:1-20:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Transport_Velocity/Transport_complex.mo:2:1-71:22:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Transport_Velocity/Transport_constant.mo:2:1-49:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Transport_Velocity/Transport_base.mo:2:1-52:19:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Selection_Function/package.mo:2:1-20:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Selection_Function/Selection_Kersting.mo:2:1-80:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Selection_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Selection_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Selection_Function/Selection_Steinmetz.mo:2:1-104:24:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Selection_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Selection_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Selection_Function/Selection_constant.mo:2:1-45:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Selection_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Selection_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Selection_Function/Selection_base.mo:2:1-50:19:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Selection_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Selection_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Breakage_Function/package.mo:2:1-20:22:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Breakage_Function/Breakage_Austin.mo:2:1-109:20:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Breakage_Function/Breakage_Steinmetz.mo:2:1-106:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Breakage_Function/Breakage_constant.mo:2:1-45:22:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Breakage_Function/Breakage_base.mo:2:1-51:18:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Drying/package.mo:2:1-20:11:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Drying/Drying_ideal.mo:2:1-58:17:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Drying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Drying; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Drying/Drying_base.mo:2:1-44:16:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Drying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Drying; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Classifying/package.mo:2:1-20:16:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Classifying/Classifying_flow.mo:2:1-111:21:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Classifying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Classifying; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Classifying/Classifying_centrifugal.mo:2:1-153:28:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Classifying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Classifying; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Classifying/Classifying_centrifugal_base.mo:2:1-45:33:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Classifying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Classifying; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Classifying/Classifying_flow_base.mo:2:1-45:26:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Classifying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Classifying; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/package.mo:2:1-20:12:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/iCom_Dryer.mo:2:1-57:15:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/iCom_FlowClassifier.mo:2:1-67:24:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/iCom_CentrifugalClassifier.mo:2:1-69:31:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/iCom_Grinder.mo:2:1-61:17:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/FuelClassification_example_21classes.mo:2:1-43:41:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/GeometricProgression.mo:2:1-56:25:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/FuelClassification_generic.mo:2:1-43:31:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/FuelClassification_example_05classes.mo:2:1-43:41:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/FuelClassification_example_11classes.mo:2:1-43:41:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/FuelClassification_base.mo:2:1-61:28:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/package.mo:2:1-23:10:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/package.mo:2:1-23:10:writable] Warning: The package.order file contains a class TestFuelJoin, which is expected to be stored in file TestFuelJoin.mo, but seems to be named testFuelJoin.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/package.mo:2:1-23:10:writable] Warning: The package.order file contains a class TestAerosolVolume, which is expected to be stored in file TestAerosolVolume.mo, but seems to be named testAerosolVolume.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/package.mo:2:1-23:10:writable] Warning: The package.order file contains a class TestDryer, which is expected to be stored in file TestDryer.mo, but seems to be named testDryer.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/package.mo:2:1-23:10:writable] Warning: The package.order file contains a class TestGrinder, which is expected to be stored in file TestGrinder.mo, but seems to be named testGrinder.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testFuelJoin.mo:2:1-93:17:writable] Warning: Expected the package to have name testFuelJoin, but got TestFuelJoin. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testFuelJoin.mo:2:1-93:17:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Check; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testAerosolVolume.mo:2:1-176:22:writable] Warning: Expected the package to have name testAerosolVolume, but got TestAerosolVolume. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testAerosolVolume.mo:2:1-176:22:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Check; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testDryer.mo:2:1-93:14:writable] Warning: Expected the package to have name testDryer, but got TestDryer. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testDryer.mo:2:1-93:14:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Check; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testGrinder.mo:2:1-154:16:writable] Warning: Expected the package to have name testGrinder, but got TestGrinder. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testGrinder.mo:2:1-154:16:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Check; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/package.mo): time 0.5694/0.5694, allocations: 100.7 MB / 127.8 MB, free: 164 kB / 106.8 MB
"
[Timeout remaining time 179]
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.1.0+maint.om/package.mo", uses=false) [Timeout 180]
"Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.1.0+maint.om/package.mo): time 0.0009173/0.0009173, allocations: 90.23 kB / 158.9 MB, free: 1.246 MB / 138.8 MB
"
[Timeout remaining time 180]
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.1.0+maint.om/package.mo", uses=false) [Timeout 180]
"Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.1.0+maint.om/package.mo): time 0.0009518/0.0009518, allocations: 168.1 kB / 162.4 MB, free: 13.82 MB / 154.8 MB
"
[Timeout remaining time 180]
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.1.0+maint.om/package.mo", uses=false) [Timeout 180]
"Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.1.0+maint.om/package.mo): time 0.9484/0.9484, allocations: 177.1 MB / 342.8 MB, free: 11.64 MB / 314.8 MB
"
[Timeout remaining time 179]
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.2/package.mo", uses=false) [Timeout 180]
"Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.2/package.mo): time 1.951/1.951, allocations: 376.9 MB / 0.758 GB, free: 15.46 MB / 0.7137 GB
"
[Timeout remaining time 178]
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt master/package.mo", uses=false) [Timeout 180]
"[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt master/Basics/Interfaces/Thermal/package.mo:2:1-91:12:writable] Warning: The package.order file contains a class FluidPortOut_simple, which is expected to be stored in file FluidPortOut_simple.mo, but seems to be named fluidPortOut_simple.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt master/Basics/Interfaces/Thermal/package.mo:2:1-91:12:writable] Warning: The package.order file contains a class FluidPortIn_simple, which is expected to be stored in file FluidPortIn_simple.mo, but seems to be named fluidPortIn_simple.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt master/Basics/Interfaces/Thermal/fluidPortOut_simple.mo:2:1-49:24:writable] Warning: Expected the package to have name fluidPortOut_simple, but got FluidPortOut_simple. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt master/Basics/Interfaces/Thermal/fluidPortIn_simple.mo:2:1-50:23:writable] Warning: Expected the package to have name fluidPortIn_simple, but got FluidPortIn_simple. Proceeding since only the case of the names are different.
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt master/package.mo): time 1.791/1.791, allocations: 241.3 MB / 1.117 GB, free: 10.28 MB / 1.042 GB
"
[Timeout remaining time 178]
Using package TransiEnt with version 2.0.3 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt master/package.mo)
Using package Buildings with version 12.1.2 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.2/package.mo)
Using package Modelica with version 4.1.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.1.0+maint.om/package.mo)
Using package Complex with version 4.1.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.1.0+maint.om/package.mo)
Using package ModelicaServices with version 4.1.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.1.0+maint.om/package.mo)
Using package ClaRa with version 1.8.1 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/package.mo)
Using package DymolaCommands with version 0.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/DymolaCommands master/package.mo)
Running command: translateModel(TransiEnt.Basics.Blocks.Check.TestDiscreteTimeSlewRateLimiter,tolerance=1e-06,outputFormat="empty",numberOfIntervals=867,variableFilter="",fileNamePrefix="TransiEnt_TransiEnt.Basics.Blocks.Check.TestDiscreteTimeSlewRateLimiter")
translateModel(TransiEnt.Basics.Blocks.Check.TestDiscreteTimeSlewRateLimiter,tolerance=1e-06,outputFormat="empty",numberOfIntervals=867,variableFilter="",fileNamePrefix="TransiEnt_TransiEnt.Basics.Blocks.Check.TestDiscreteTimeSlewRateLimiter") [Timeout 660]
"Notification: Performance of FrontEnd - loaded program: time 1.463e-06/1.463e-06, allocations: 0 / 1.207 GB, free: 14.41 MB / 1.136 GB
Notification: Performance of FrontEnd - Absyn->SCode: time 2.296e-05/2.443e-05, allocations: 2.312 kB / 1.207 GB, free: 14.4 MB / 1.136 GB
Notification: Performance of NFInst.instantiate(TransiEnt.Basics.Blocks.Check.TestDiscreteTimeSlewRateLimiter): time 0.00311/0.003135, allocations: 2.048 MB / 1.209 GB, free: 12.34 MB / 1.136 GB
Notification: Performance of NFInst.instExpressions: time 0.001131/0.004266, allocations: 0.6192 MB / 1.209 GB, free: 11.72 MB / 1.136 GB
Notification: Performance of NFInst.updateImplicitVariability: time 6.423e-05/0.00433, allocations: 3.938 kB / 1.209 GB, free: 11.72 MB / 1.136 GB
Notification: Performance of NFTyping.typeComponents: time 0.0001678/0.004498, allocations: 71.81 kB / 1.209 GB, free: 11.65 MB / 1.136 GB
Notification: Performance of NFTyping.typeBindings: time 0.0001358/0.004634, allocations: 87.62 kB / 1.209 GB, free: 11.56 MB / 1.136 GB
Notification: Performance of NFTyping.typeClassSections: time 0.0004369/0.005071, allocations: 95.7 kB / 1.209 GB, free: 11.47 MB / 1.136 GB
Notification: Performance of NFFlatten.flatten: time 0.0001899/0.005261, allocations: 139.6 kB / 1.21 GB, free: 11.33 MB / 1.136 GB
Notification: Performance of NFFlatten.resolveConnections: time 7.549e-05/0.005336, allocations: 12 kB / 1.21 GB, free: 11.32 MB / 1.136 GB
Notification: Performance of NFEvalConstants.evaluate: time 0.0001279/0.005464, allocations: 83.78 kB / 1.21 GB, free: 11.24 MB / 1.136 GB
Notification: Performance of NFSimplifyModel.simplify: time 0.0001664/0.00563, allocations: 99.84 kB / 1.21 GB, free: 11.14 MB / 1.136 GB
Notification: Performance of NFPackage.collectConstants: time 2.306e-05/0.005654, allocations: 8 kB / 1.21 GB, free: 11.13 MB / 1.136 GB
Notification: Performance of NFFlatten.collectFunctions: time 0.0001296/0.005783, allocations: 75.88 kB / 1.21 GB, free: 11.06 MB / 1.136 GB
Notification: Performance of NFScalarize.scalarize: time 5.702e-05/0.00584, allocations: 27.92 kB / 1.21 GB, free: 11.03 MB / 1.136 GB
Notification: Performance of NFVerifyModel.verify: time 5.561e-05/0.005896, allocations: 39.84 kB / 1.21 GB, free: 10.99 MB / 1.136 GB
Notification: Performance of NFConvertDAE.convert: time 0.0002244/0.00612, allocations: 163.5 kB / 1.21 GB, free: 10.83 MB / 1.136 GB
Notification: Performance of FrontEnd - DAE generated: time 2.234e-06/0.006122, allocations: 4 kB / 1.21 GB, free: 10.83 MB / 1.136 GB
Notification: Performance of FrontEnd: time 1.042e-06/0.006123, allocations: 0 / 1.21 GB, free: 10.83 MB / 1.136 GB
Notification: Performance of Transformations before backend: time 3.267e-06/0.006127, allocations: 0 / 1.21 GB, free: 10.83 MB / 1.136 GB
Notification: Model statistics after passing the front-end and creating the data structures used by the back-end:
 * Number of equations: 14
 * Number of variables: 14
Notification: Performance of Generate backend data structure: time 0.0005163/0.006643, allocations: 423.3 kB / 1.21 GB, free: 10.38 MB / 1.136 GB
Notification: Performance of prepare preOptimizeDAE: time 3.566e-05/0.006679, allocations: 8.031 kB / 1.21 GB, free: 10.37 MB / 1.136 GB
Notification: Performance of preOpt normalInlineFunction (simulation): time 5.067e-05/0.006729, allocations: 24.92 kB / 1.21 GB, free: 10.35 MB / 1.136 GB
Notification: Performance of preOpt evaluateParameters (simulation): time 0.0001704/0.0069, allocations: 150.8 kB / 1.211 GB, free: 10.18 MB / 1.136 GB
Notification: Performance of preOpt simplifyIfEquations (simulation): time 1.011e-05/0.00691, allocations: 384 / 1.211 GB, free: 10.18 MB / 1.136 GB
Notification: Performance of preOpt expandDerOperator (simulation): time 2.061e-05/0.00693, allocations: 12.36 kB / 1.211 GB, free: 10.16 MB / 1.136 GB
Notification: Performance of preOpt clockPartitioning (simulation): time 0.0001608/0.007091, allocations: 151.7 kB / 1.211 GB, free: 10 MB / 1.136 GB
Notification: Performance of preOpt findStateOrder (simulation): time 7.113e-06/0.007098, allocations: 0 / 1.211 GB, free: 10 MB / 1.136 GB
Notification: Performance of preOpt replaceEdgeChange (simulation): time 1.182e-05/0.00711, allocations: 4 kB / 1.211 GB, free: 9.996 MB / 1.136 GB
Notification: Performance of preOpt inlineArrayEqn (simulation): time 5.11e-06/0.007115, allocations: 0 / 1.211 GB, free: 9.996 MB / 1.136 GB
Notification: Performance of preOpt removeEqualRHS (simulation): time 0.0001079/0.007223, allocations: 87.38 kB / 1.211 GB, free: 9.898 MB / 1.136 GB
Notification: Performance of preOpt removeSimpleEquations (simulation): time 0.0002282/0.007451, allocations: 175.1 kB / 1.211 GB, free: 9.711 MB / 1.136 GB
Notification: Performance of preOpt comSubExp (simulation): time 8.387e-05/0.007535, allocations: 141.9 kB / 1.211 GB, free: 9.551 MB / 1.136 GB
Notification: Performance of preOpt resolveLoops (simulation): time 5.084e-05/0.007586, allocations: 84.31 kB / 1.211 GB, free: 9.453 MB / 1.136 GB
Notification: Performance of preOpt evalFunc (simulation): time 1.413e-05/0.0076, allocations: 11.88 kB / 1.211 GB, free: 9.441 MB / 1.136 GB
Notification: Performance of preOpt encapsulateWhenConditions (simulation): time 0.0001629/0.007763, allocations: 250.6 kB / 1.211 GB, free: 9.152 MB / 1.136 GB
Notification: Performance of pre-optimization done (n=17): time 1.323e-06/0.007764, allocations: 0 / 1.211 GB, free: 9.152 MB / 1.136 GB
Notification: Performance of matching and sorting (n=17): time 0.0002394/0.008004, allocations: 335.2 kB / 1.212 GB, free: 8.785 MB / 1.136 GB
Notification: Performance of inlineWhenForInitialization (initialization): time 6.352e-05/0.008067, allocations: 170.2 kB / 1.212 GB, free: 8.582 MB / 1.136 GB
Notification: Performance of selectInitializationVariablesDAE (initialization): time 0.0001006/0.008168, allocations: 188.1 kB / 1.212 GB, free: 8.387 MB / 1.136 GB
Notification: Performance of collectPreVariables (initialization): time 1.367e-05/0.008182, allocations: 29.7 kB / 1.212 GB, free: 8.352 MB / 1.136 GB
Notification: Performance of collectInitialEqns (initialization): time 3.056e-05/0.008212, allocations: 96.09 kB / 1.212 GB, free: 8.254 MB / 1.136 GB
Notification: Performance of collectInitialBindings (initialization): time 3.395e-05/0.008246, allocations: 43.67 kB / 1.212 GB, free: 8.211 MB / 1.136 GB
Notification: Performance of simplifyInitialFunctions (initialization): time 3.8e-05/0.008284, allocations: 33.69 kB / 1.212 GB, free: 8.172 MB / 1.136 GB
Notification: Performance of setup shared object (initialization): time 7.831e-05/0.008362, allocations: 334.8 kB / 1.213 GB, free: 7.836 MB / 1.136 GB
Notification: Performance of preBalanceInitialSystem (initialization): time 3.918e-05/0.008402, allocations: 82.41 kB / 1.213 GB, free: 7.742 MB / 1.136 GB
Notification: Performance of partitionIndependentBlocks (initialization): time 5.939e-05/0.008461, allocations: 125.4 kB / 1.213 GB, free: 7.586 MB / 1.136 GB
Notification: Performance of analyzeInitialSystem (initialization): time 0.0001462/0.008607, allocations: 227.5 kB / 1.213 GB, free: 7.316 MB / 1.136 GB
Notification: Performance of solveInitialSystemEqSystem (initialization): time 2.955e-06/0.00861, allocations: 4 kB / 1.213 GB, free: 7.312 MB / 1.136 GB
Notification: Performance of matching and sorting (n=23) (initialization): time 0.000222/0.008832, allocations: 247 kB / 1.213 GB, free: 7.039 MB / 1.136 GB
Notification: Performance of prepare postOptimizeDAE: time 4.419e-05/0.008876, allocations: 63.39 kB / 1.213 GB, free: 6.965 MB / 1.136 GB
Notification: Performance of postOpt simplifyComplexFunction (initialization): time 6.682e-06/0.008883, allocations: 4 kB / 1.213 GB, free: 6.961 MB / 1.136 GB
Notification: Performance of postOpt tearingSystem (initialization): time 1.347e-05/0.008896, allocations: 0 / 1.213 GB, free: 6.961 MB / 1.136 GB
Notification: Performance of postOpt solveSimpleEquations (initialization): time 8.18e-05/0.008978, allocations: 27.92 kB / 1.213 GB, free: 6.934 MB / 1.136 GB
Notification: Performance of postOpt calculateStrongComponentJacobians (initialization): time 5.079e-06/0.008983, allocations: 4 kB / 1.213 GB, free: 6.93 MB / 1.136 GB
Notification: Performance of postOpt simplifyAllExpressions (initialization): time 7.519e-05/0.009058, allocations: 11.89 kB / 1.213 GB, free: 6.918 MB / 1.136 GB
Notification: Performance of postOpt collapseArrayExpressions (initialization): time 1.328e-05/0.009072, allocations: 8 kB / 1.213 GB, free: 6.91 MB / 1.136 GB
Warning: Assuming fixed start value for the following 4 variables:
         SlewRateLimiter.y:DISCRETE(flow=false fixed = true )  \"Connector of Real output signal\" type: Real
         SlewRateLimiter.y_limited_by_rate:DISCRETE(fixed = true )  \"Limited value without absolute value limit\" type: Real
         SlewRateLimiter.y_rcbl_by_rate_min:DISCRETE(fixed = true )  \"Reachable output in next step if input is only limited by falling rate\" type: Real
         SlewRateLimiter.y_rcbl_by_rate_max:DISCRETE(fixed = true )  \"Reachable output in next step if input is only limited by rising rate\" type: Real
Notification: Model statistics after passing the back-end for initialization:
 * Number of independent subsystems: 7
 * Number of states: 0 ()
 * Number of discrete variables: 21 ($PRE.SlewRateLimiter.y,SlewRateLimiter.y,$PRE.SlewRateLimiter.y_limited_by_rate,SlewRateLimiter.y_limited_by_rate,$PRE.SlewRateLimiter.y_rcbl_by_rate_min,SlewRateLimiter.y_rcbl_by_rate_min,$PRE.SlewRateLimiter.y_rcbl_by_rate_max,SlewRateLimiter.y_rcbl_by_rate_max,SlewRateLimiter.firstTrigger,$PRE.SlewRateLimiter.firstTrigger,SlewRateLimiter.sampleTrigger,$whenCondition4,$whenCondition3,$whenCondition1,Testdata.nextEventScaled,Testdata.nextEvent,$PRE.Testdata.nextEvent,Testdata.last,Testdata.b,Testdata.a,$whenCondition2)
 * Number of discrete states: 0 ()
 * Number of clocked states: 0 ()
 * Top-level inputs: 0
Notification: Strong component statistics for initialization (17):
 * Single equations (assignments): 15
 * Array equations: 0
 * Algorithm blocks: 2
 * Record equations: 0
 * When equations: 0
 * If-equations: 0
 * Equation systems (not torn): 0
 * Torn equation systems: 0
 * Mixed (continuous/discrete) equation systems: 0
Notification: Performance of prepare postOptimizeDAE: time 0.0001809/0.009253, allocations: 216.1 kB / 1.214 GB, free: 6.676 MB / 1.136 GB
Notification: Performance of postOpt lateInlineFunction (simulation): time 3.536e-05/0.009288, allocations: 23.92 kB / 1.214 GB, free: 6.652 MB / 1.136 GB
Notification: Performance of postOpt wrapFunctionCalls (simulation): time 3.016e-05/0.009318, allocations: 25.8 kB / 1.214 GB, free: 6.629 MB / 1.136 GB
Notification: Performance of postOpt inlineArrayEqn (simulation): time 2.194e-06/0.00932, allocations: 0 / 1.214 GB, free: 6.629 MB / 1.136 GB
Notification: Performance of postOpt constantLinearSystem (simulation): time 1.844e-06/0.009322, allocations: 0 / 1.214 GB, free: 6.629 MB / 1.136 GB
Notification: Performance of postOpt simplifysemiLinear (simulation): time 3.326e-06/0.009325, allocations: 96 / 1.214 GB, free: 6.629 MB / 1.136 GB
Notification: Performance of postOpt removeSimpleEquations (simulation): time 0.0003675/0.009693, allocations: 0.4972 MB / 1.214 GB, free: 6.082 MB / 1.136 GB
Notification: Performance of postOpt simplifyComplexFunction (simulation): time 1.342e-06/0.009694, allocations: 0 / 1.214 GB, free: 6.082 MB / 1.136 GB
Notification: Performance of postOpt solveSimpleEquations (simulation): time 2.086e-05/0.009715, allocations: 11.92 kB / 1.214 GB, free: 6.07 MB / 1.136 GB
Notification: Performance of postOpt tearingSystem (simulation): time 1.813e-06/0.009717, allocations: 0 / 1.214 GB, free: 6.07 MB / 1.136 GB
Notification: Performance of postOpt inputDerivativesUsed (simulation): time 9.798e-06/0.009727, allocations: 8 kB / 1.214 GB, free: 6.062 MB / 1.136 GB
Notification: Performance of postOpt calculateStrongComponentJacobians (simulation): time 1.162e-06/0.009728, allocations: 0 / 1.214 GB, free: 6.062 MB / 1.136 GB
Notification: Performance of postOpt calculateStateSetsJacobians (simulation): time 7.51e-07/0.009729, allocations: 0 / 1.214 GB, free: 6.062 MB / 1.136 GB
Notification: Performance of postOpt symbolicJacobian (simulation): time 0.0001964/0.009925, allocations: 416.8 kB / 1.215 GB, free: 5.613 MB / 1.136 GB
Notification: Performance of postOpt removeConstants (simulation): time 1.5e-05/0.00994, allocations: 19.83 kB / 1.215 GB, free: 5.594 MB / 1.136 GB
Notification: Performance of postOpt simplifyTimeIndepFuncCalls (simulation): time 2.582e-05/0.009966, allocations: 8 kB / 1.215 GB, free: 5.586 MB / 1.136 GB
Notification: Performance of postOpt simplifyAllExpressions (simulation): time 7.265e-05/0.01004, allocations: 11.98 kB / 1.215 GB, free: 5.574 MB / 1.136 GB
Notification: Performance of postOpt findZeroCrossings (simulation): time 2.705e-05/0.01007, allocations: 4 kB / 1.215 GB, free: 5.57 MB / 1.136 GB
Notification: Performance of postOpt collapseArrayExpressions (simulation): time 1.72e-05/0.01008, allocations: 11.98 kB / 1.215 GB, free: 5.559 MB / 1.136 GB
Notification: Performance of sorting global known variables: time 3.908e-05/0.01012, allocations: 49.81 kB / 1.215 GB, free: 5.508 MB / 1.136 GB
Notification: Performance of sort global known variables: time 7e-08/0.01012, allocations: 4 kB / 1.215 GB, free: 5.504 MB / 1.136 GB
Notification: Performance of remove unused functions: time 0.0001824/0.0103, allocations: 51.94 kB / 1.215 GB, free: 5.453 MB / 1.136 GB
Notification: Model statistics after passing the back-end for simulation:
 * Number of independent subsystems: 1
 * Number of states: 0 ()
 * Number of discrete variables: 15 (SlewRateLimiter.sampleTrigger,$whenCondition1,$whenCondition2,$whenCondition3,$whenCondition4,SlewRateLimiter.firstTrigger,SlewRateLimiter.y,SlewRateLimiter.y_rcbl_by_rate_max,SlewRateLimiter.y_rcbl_by_rate_min,SlewRateLimiter.y_limited_by_rate,Testdata.a,Testdata.b,Testdata.last,Testdata.nextEvent,Testdata.nextEventScaled)
 * Number of discrete states: 12 (Testdata.nextEvent,Testdata.last,Testdata.nextEventScaled,Testdata.b,Testdata.a,$whenCondition2,$whenCondition4,SlewRateLimiter.y,SlewRateLimiter.y_limited_by_rate,SlewRateLimiter.y_rcbl_by_rate_min,SlewRateLimiter.y_rcbl_by_rate_max,$whenCondition3)
 * Number of clocked states: 0 ()
 * Top-level inputs: 0
Notification: Strong component statistics for simulation (7):
 * Single equations (assignments): 4
 * Array equations: 0
 * Algorithm blocks: 2
 * Record equations: 0
 * When equations: 1
 * If-equations: 0
 * Equation systems (not torn): 0
 * Torn equation systems: 0
 * Mixed (continuous/discrete) equation systems: 0
Notification: Performance of Backend phase and start with SimCode phase: time 0.000141/0.01045, allocations: 132.8 kB / 1.215 GB, free: 5.312 MB / 1.136 GB
Notification: Performance of simCode: created initialization part: time 0.0002013/0.01065, allocations: 326.4 kB / 1.215 GB, free: 4.941 MB / 1.136 GB
Notification: Performance of simCode: created event and clocks part: time 4.608e-06/0.01065, allocations: 4 kB / 1.215 GB, free: 4.938 MB / 1.136 GB
Notification: Performance of simCode: created simulation system equations: time 0.0001103/0.01076, allocations: 242.4 kB / 1.215 GB, free: 4.664 MB / 1.136 GB
Notification: Performance of simCode: created of all other equations (e.g. parameter, nominal, assert, etc): time 0.0001536/0.01092, allocations: 27.86 kB / 1.215 GB, free: 4.637 MB / 1.136 GB
Notification: Performance of simCode: created linear, non-linear and system jacobian parts: time 0.0003793/0.01129, allocations: 367.1 kB / 1.216 GB, free: 4.234 MB / 1.136 GB
Notification: Performance of simCode: some other stuff during SimCode phase: time 4.413e-05/0.01134, allocations: 75.31 kB / 1.216 GB, free: 4.141 MB / 1.136 GB
Notification: Performance of simCode: alias equations: time 2.399e-05/0.01136, allocations: 8.5 kB / 1.216 GB, free: 4.129 MB / 1.136 GB
Notification: Performance of simCode: all other stuff during SimCode phase: time 9.365e-05/0.01146, allocations: 87.36 kB / 1.216 GB, free: 4.043 MB / 1.136 GB
Notification: Performance of SimCode: time 6.41e-07/0.01146, allocations: 0 / 1.216 GB, free: 4.043 MB / 1.136 GB
Notification: Performance of Templates: time 0.003512/0.01497, allocations: 2.008 MB / 1.218 GB, free: 2.055 MB / 1.136 GB
"
[Timeout remaining time 660]
make -j1 -f TransiEnt_TransiEnt.Basics.Blocks.Check.TestDiscreteTimeSlewRateLimiter.makefile [Timeout 660]
(rm -f TransiEnt_TransiEnt.Basics.Blocks.Check.TestDiscreteTimeSlewRateLimiter.pipe ; mkfifo TransiEnt_TransiEnt.Basics.Blocks.Check.TestDiscreteTimeSlewRateLimiter.pipe ; head -c 1048576 < TransiEnt_TransiEnt.Basics.Blocks.Check.TestDiscreteTimeSlewRateLimiter.pipe >> ../files/TransiEnt_TransiEnt.Basics.Blocks.Check.TestDiscreteTimeSlewRateLimiter.sim & ./TransiEnt_TransiEnt.Basics.Blocks.Check.TestDiscreteTimeSlewRateLimiter -abortSlowSimulation -alarm=240  -lv LOG_STATS > TransiEnt_TransiEnt.Basics.Blocks.Check.TestDiscreteTimeSlewRateLimiter.pipe 2>&1) [Timeout 240]
[Calling sys.exit(0), Time elapsed: 7.267114507034421]