Running: ./testmodel.py --libraries=/home/hudson/saved_omc/libraries/.openmodelica/libraries --ompython_omhome=/usr TransiEnt_TransiEnt.Basics.Blocks.Check.CompareSlewRateLimiters.conf.json
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/DymolaCommands master/package.mo", uses=false) [Timeout 180]
"[<interactive>:1:22-1:33:writable] Warning: Modelica only supports 32-bit signed integers! Transforming: 13743895347 into a real
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/DymolaCommands master/package.mo): time 0.0002266/0.0002266, allocations: 0 / 0, free: 0 / 0
"
[Timeout remaining time 180]
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/package.mo", uses=false) [Timeout 180]
"[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Control/PredictorModels_3508/Check/package.mo:2:1-21:10:writable] Warning: The package.order file contains a class TestReheater, which is expected to be stored in file TestReheater.mo, but seems to be named testReheater.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Control/PredictorModels_3508/Check/testReheater.mo:2:1-117:17:writable] Warning: Expected the package to have name testReheater, but got TestReheater. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/package.mo:2:1-23:10:writable] Warning: PhysicalMills was referenced in the package.order file, but was not found in package.mo, PhysicalMills/package.mo or PhysicalMills.mo.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/package.mo:2:1-22:18:writable] Warning: Expected the package to have name physicalMills, but got PhysicalMills. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/package.mo:2:1-22:18:writable] Warning: The package.order file contains a class Mill_L4_advancedInit, which is expected to be stored in file Mill_L4_advancedInit.mo, but seems to be named mill_L4_advancedInit.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/package.mo:2:1-22:18:writable] Warning: The package.order file contains a class Mill_L4, which is expected to be stored in file Mill_L4.mo, but seems to be named mill_L4.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/mill_L4_advancedInit.mo:2:1-58:25:writable] Warning: Expected the package to have name mill_L4_advancedInit, but got Mill_L4_advancedInit. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/mill_L4_advancedInit.mo:2:1-58:25:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills; but got within ClaRa.Components.Mills.PhysicalMills; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/mill_L4.mo:2:1-315:12:writable] Warning: Expected the package to have name mill_L4, but got Mill_L4. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/mill_L4.mo:2:1-315:12:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills; but got within ClaRa.Components.Mills.PhysicalMills; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/package.mo:2:1-21:10:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills; but got within ClaRa.Components.Mills.PhysicalMills; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/package.mo:2:1-21:10:writable] Warning: The package.order file contains a class TestMillBox_2, which is expected to be stored in file TestMillBox_2.mo, but seems to be named testMillBox_2.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/package.mo:2:1-21:10:writable] Warning: The package.order file contains a class TestMillBox_1_measurementInput, which is expected to be stored in file TestMillBox_1_measurementInput.mo, but seems to be named testMillBox_1_measurementInput.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/package.mo:2:1-21:10:writable] Warning: The package.order file contains a class TestMillBox_1, which is expected to be stored in file TestMillBox_1.mo, but seems to be named testMillBox_1.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/testMillBox_2.mo:2:1-297:18:writable] Warning: Expected the package to have name testMillBox_2, but got TestMillBox_2. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/testMillBox_2.mo:2:1-297:18:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Check; but got within ClaRa.Components.Mills.PhysicalMills.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/testMillBox_1_measurementInput.mo:2:1-1342:35:writable] Warning: Expected the package to have name testMillBox_1_measurementInput, but got TestMillBox_1_measurementInput. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/testMillBox_1_measurementInput.mo:2:1-1342:35:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Check; but got within ClaRa.Components.Mills.PhysicalMills.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/testMillBox_1.mo:2:1-465:18:writable] Warning: Expected the package to have name testMillBox_1, but got TestMillBox_1. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/testMillBox_1.mo:2:1-465:18:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Check; but got within ClaRa.Components.Mills.PhysicalMills.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/package.mo:2:1-29:12:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills; but got within ClaRa.Components.Mills.PhysicalMills; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/FlowClassifier.mo:2:1-346:19:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/CentrifugalClassifier.mo:2:1-380:26:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/GrinderRingRoller.mo:2:1-294:22:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/FuelJoin_distributed.mo:2:1-133:25:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Dryer.mo:2:1-301:10:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/package.mo:2:1-20:17:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/package.mo:2:1-20:13:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Transport_Velocity/package.mo:2:1-20:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Transport_Velocity/Transport_complex.mo:2:1-71:22:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Transport_Velocity/Transport_constant.mo:2:1-49:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Transport_Velocity/Transport_base.mo:2:1-52:19:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Selection_Function/package.mo:2:1-20:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Selection_Function/Selection_Kersting.mo:2:1-80:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Selection_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Selection_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Selection_Function/Selection_Steinmetz.mo:2:1-104:24:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Selection_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Selection_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Selection_Function/Selection_constant.mo:2:1-45:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Selection_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Selection_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Selection_Function/Selection_base.mo:2:1-50:19:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Selection_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Selection_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Breakage_Function/package.mo:2:1-20:22:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Breakage_Function/Breakage_Austin.mo:2:1-109:20:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Breakage_Function/Breakage_Steinmetz.mo:2:1-106:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Breakage_Function/Breakage_constant.mo:2:1-45:22:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Breakage_Function/Breakage_base.mo:2:1-51:18:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Drying/package.mo:2:1-20:11:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Drying/Drying_ideal.mo:2:1-58:17:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Drying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Drying; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Drying/Drying_base.mo:2:1-44:16:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Drying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Drying; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Classifying/package.mo:2:1-20:16:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Classifying/Classifying_flow.mo:2:1-111:21:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Classifying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Classifying; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Classifying/Classifying_centrifugal.mo:2:1-153:28:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Classifying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Classifying; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Classifying/Classifying_centrifugal_base.mo:2:1-45:33:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Classifying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Classifying; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Classifying/Classifying_flow_base.mo:2:1-45:26:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Classifying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Classifying; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/package.mo:2:1-20:12:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/iCom_Dryer.mo:2:1-57:15:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/iCom_FlowClassifier.mo:2:1-67:24:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/iCom_CentrifugalClassifier.mo:2:1-69:31:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/iCom_Grinder.mo:2:1-61:17:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/FuelClassification_example_21classes.mo:2:1-43:41:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/GeometricProgression.mo:2:1-56:25:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/FuelClassification_generic.mo:2:1-43:31:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/FuelClassification_example_05classes.mo:2:1-43:41:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/FuelClassification_example_11classes.mo:2:1-43:41:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/FuelClassification_base.mo:2:1-61:28:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/package.mo:2:1-23:10:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/package.mo:2:1-23:10:writable] Warning: The package.order file contains a class TestFuelJoin, which is expected to be stored in file TestFuelJoin.mo, but seems to be named testFuelJoin.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/package.mo:2:1-23:10:writable] Warning: The package.order file contains a class TestAerosolVolume, which is expected to be stored in file TestAerosolVolume.mo, but seems to be named testAerosolVolume.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/package.mo:2:1-23:10:writable] Warning: The package.order file contains a class TestDryer, which is expected to be stored in file TestDryer.mo, but seems to be named testDryer.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/package.mo:2:1-23:10:writable] Warning: The package.order file contains a class TestGrinder, which is expected to be stored in file TestGrinder.mo, but seems to be named testGrinder.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testFuelJoin.mo:2:1-93:17:writable] Warning: Expected the package to have name testFuelJoin, but got TestFuelJoin. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testFuelJoin.mo:2:1-93:17:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Check; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testAerosolVolume.mo:2:1-176:22:writable] Warning: Expected the package to have name testAerosolVolume, but got TestAerosolVolume. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testAerosolVolume.mo:2:1-176:22:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Check; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testDryer.mo:2:1-93:14:writable] Warning: Expected the package to have name testDryer, but got TestDryer. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testDryer.mo:2:1-93:14:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Check; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testGrinder.mo:2:1-154:16:writable] Warning: Expected the package to have name testGrinder, but got TestGrinder. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testGrinder.mo:2:1-154:16:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Check; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/package.mo): time 0.0816/0.0816, allocations: 0 / 0, free: 0 / 0
"
[Timeout remaining time 180]
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.1.0+maint.om/package.mo", uses=false) [Timeout 180]
"Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.1.0+maint.om/package.mo): time 0.0002099/0.0002099, allocations: 0 / 0, free: 0 / 0
"
[Timeout remaining time 180]
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.1.0+maint.om/package.mo", uses=false) [Timeout 180]
"Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.1.0+maint.om/package.mo): time 0.0002695/0.0002695, allocations: 0 / 0, free: 0 / 0
"
[Timeout remaining time 180]
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.1.0+maint.om/package.mo", uses=false) [Timeout 180]
"Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.1.0+maint.om/package.mo): time 0.1101/0.1101, allocations: 0 / 0, free: 0 / 0
"
[Timeout remaining time 180]
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.2/package.mo", uses=false) [Timeout 180]
"Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.2/package.mo): time 0.2204/0.2204, allocations: 0 / 0, free: 0 / 0
"
[Timeout remaining time 180]
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt master/package.mo", uses=false) [Timeout 180]
"[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt master/Consumer/Heat/Check/TestHeatConsumerNode.mo:26:12-26:23:writable] Warning: Modelica only supports 32-bit signed integers! Transforming: 60000000000 into a real
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt master/Consumer/Heat/Check/TestHeatConsumerNode.mo:26:24-26:36:writable] Warning: Modelica only supports 32-bit signed integers! Transforming: 160000000000 into a real
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt master/Producer/Electrical/Wind/Check/TestWindturbine2.mo:39:12-39:25:writable] Warning: Modelica only supports 32-bit signed integers! Transforming: 3500000000000 into a real
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt master/Components/Electrical/PowerTransformation/Check/GridN5AreaFirstVoltageCollapse.mo:225:32-225:42:writable] Warning: Modelica only supports 32-bit signed integers! Transforming: 3000000000 into a real
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt master/Components/Electrical/Machines/ExcitationSystemsVoltageController/Check/GridN5AreaVoltageCollapseOEL.mo:173:32-173:42:writable] Warning: Modelica only supports 32-bit signed integers! Transforming: 3000000000 into a real
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt master/Components/Electrical/Grid/Check/CheckElectricBusbarComplex.mo:179:32-179:42:writable] Warning: Modelica only supports 32-bit signed integers! Transforming: 3000000000 into a real
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt master/Basics/Interfaces/Thermal/package.mo:2:1-91:12:writable] Warning: The package.order file contains a class FluidPortOut_simple, which is expected to be stored in file FluidPortOut_simple.mo, but seems to be named fluidPortOut_simple.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt master/Basics/Interfaces/Thermal/package.mo:2:1-91:12:writable] Warning: The package.order file contains a class FluidPortIn_simple, which is expected to be stored in file FluidPortIn_simple.mo, but seems to be named fluidPortIn_simple.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt master/Basics/Interfaces/Thermal/fluidPortOut_simple.mo:2:1-49:24:writable] Warning: Expected the package to have name fluidPortOut_simple, but got FluidPortOut_simple. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt master/Basics/Interfaces/Thermal/fluidPortIn_simple.mo:2:1-50:23:writable] Warning: Expected the package to have name fluidPortIn_simple, but got FluidPortIn_simple. Proceeding since only the case of the names are different.
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt master/package.mo): time 0.4973/0.4973, allocations: 0 / 0, free: 0 / 0
"
[Timeout remaining time 179]
Using package TransiEnt with version 2.0.3 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt master/package.mo)
Using package Buildings with version 12.1.2 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.2/package.mo)
Using package Modelica with version 4.1.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.1.0+maint.om/package.mo)
Using package Complex with version 4.1.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.1.0+maint.om/package.mo)
Using package ModelicaServices with version 4.1.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.1.0+maint.om/package.mo)
Using package ClaRa with version 1.8.1 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/package.mo)
Using package DymolaCommands with version 0.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/DymolaCommands master/package.mo)
Running command: simulate(TransiEnt.Basics.Blocks.Check.CompareSlewRateLimiters,startTime=0,stopTime=26000,tolerance=1e-06,numberOfIntervals=867,outputFormat="empty",variableFilter="",fileNamePrefix="TransiEnt_TransiEnt.Basics.Blocks.Check.CompareSlewRateLimiters",simflags="-abortSlowSimulation -alarm=240   -lv LOG_STATS")
simulate(TransiEnt.Basics.Blocks.Check.CompareSlewRateLimiters,startTime=0,stopTime=26000,tolerance=1e-06,numberOfIntervals=867,outputFormat="empty",variableFilter="",fileNamePrefix="TransiEnt_TransiEnt.Basics.Blocks.Check.CompareSlewRateLimiters",simflags="-abortSlowSimulation -alarm=240   -lv LOG_STATS") [Timeout 900]
"Notification: Performance of FrontEnd - loaded program: time 1.112e-06/1.112e-06, allocations: 0 / 0, free: 0 / 0
Notification: Performance of FrontEnd - Absyn->SCode: time 2.077e-05/2.188e-05, allocations: 0 / 0, free: 0 / 0
Notification: Performance of NFInst.instantiate(TransiEnt.Basics.Blocks.Check.CompareSlewRateLimiters): time 0.003646/0.003667, allocations: 0 / 0, free: 0 / 0
Notification: Performance of NFInst.instExpressions: time 0.002095/0.005763, allocations: 0 / 0, free: 0 / 0
Notification: Performance of NFInst.updateImplicitVariability: time 6.556e-05/0.005828, allocations: 0 / 0, free: 0 / 0
Notification: Performance of NFTyping.typeComponents: time 0.0001678/0.005996, allocations: 0 / 0, free: 0 / 0
Notification: Performance of NFTyping.typeBindings: time 0.000159/0.006155, allocations: 0 / 0, free: 0 / 0
Notification: Performance of NFTyping.typeClassSections: time 0.0006556/0.006811, allocations: 0 / 0, free: 0 / 0
Notification: Performance of NFFlatten.flatten: time 0.000214/0.007025, allocations: 0 / 0, free: 0 / 0
Notification: Performance of NFFlatten.resolveConnections: time 0.0001358/0.00716, allocations: 0 / 0, free: 0 / 0
Notification: Performance of NFEvalConstants.evaluate: time 0.0001844/0.007345, allocations: 0 / 0, free: 0 / 0
Notification: Performance of NFSimplifyModel.simplify: time 0.0001544/0.007499, allocations: 0 / 0, free: 0 / 0
Notification: Performance of NFPackage.collectConstants: time 2.362e-05/0.007523, allocations: 0 / 0, free: 0 / 0
Notification: Performance of NFFlatten.collectFunctions: time 0.0001489/0.007672, allocations: 0 / 0, free: 0 / 0
Notification: Performance of NFScalarize.scalarize: time 5.457e-05/0.007726, allocations: 0 / 0, free: 0 / 0
Notification: Performance of NFVerifyModel.verify: time 6.241e-05/0.007789, allocations: 0 / 0, free: 0 / 0
Notification: Performance of NFConvertDAE.convert: time 0.000358/0.008147, allocations: 0 / 0, free: 0 / 0
Notification: Performance of FrontEnd - DAE generated: time 2.627e-05/0.008173, allocations: 0 / 0, free: 0 / 0
Notification: Performance of FrontEnd: time 1.644e-06/0.008175, allocations: 0 / 0, free: 0 / 0
Notification: Performance of Transformations before backend: time 7.654e-06/0.008182, allocations: 0 / 0, free: 0 / 0
Notification: Model statistics after passing the front-end and creating the data structures used by the back-end:
 * Number of equations: 22
 * Number of variables: 22
Notification: Performance of Generate backend data structure: time 0.0006422/0.008825, allocations: 0 / 0, free: 0 / 0
Notification: Performance of prepare preOptimizeDAE: time 6.141e-05/0.008886, allocations: 0 / 0, free: 0 / 0
Notification: Performance of preOpt normalInlineFunction (simulation): time 7.389e-05/0.00896, allocations: 0 / 0, free: 0 / 0
Notification: Performance of preOpt evaluateParameters (simulation): time 0.0002181/0.009178, allocations: 0 / 0, free: 0 / 0
Notification: Performance of preOpt simplifyIfEquations (simulation): time 3.381e-05/0.009212, allocations: 0 / 0, free: 0 / 0
Notification: Performance of preOpt expandDerOperator (simulation): time 4.247e-05/0.009254, allocations: 0 / 0, free: 0 / 0
Notification: Performance of preOpt clockPartitioning (simulation): time 0.0002817/0.009536, allocations: 0 / 0, free: 0 / 0
Notification: Performance of preOpt findStateOrder (simulation): time 8.886e-06/0.009545, allocations: 0 / 0, free: 0 / 0
Notification: Performance of preOpt replaceEdgeChange (simulation): time 3.373e-05/0.009579, allocations: 0 / 0, free: 0 / 0
Notification: Performance of preOpt inlineArrayEqn (simulation): time 3.266e-06/0.009582, allocations: 0 / 0, free: 0 / 0
Notification: Performance of preOpt removeEqualRHS (simulation): time 0.0001279/0.00971, allocations: 0 / 0, free: 0 / 0
Notification: Performance of preOpt removeSimpleEquations (simulation): time 0.0004823/0.01019, allocations: 0 / 0, free: 0 / 0
Notification: Performance of preOpt comSubExp (simulation): time 0.0002437/0.01044, allocations: 0 / 0, free: 0 / 0
Notification: Performance of preOpt resolveLoops (simulation): time 6.632e-05/0.0105, allocations: 0 / 0, free: 0 / 0
Notification: Performance of preOpt evalFunc (simulation): time 1.858e-05/0.01052, allocations: 0 / 0, free: 0 / 0
Notification: Performance of preOpt encapsulateWhenConditions (simulation): time 0.0001991/0.01072, allocations: 0 / 0, free: 0 / 0
Notification: Performance of pre-optimization done (n=19): time 3.005e-06/0.01072, allocations: 0 / 0, free: 0 / 0
Notification: Performance of matching and sorting (n=19): time 0.0003091/0.01103, allocations: 0 / 0, free: 0 / 0
Notification: Performance of inlineWhenForInitialization (initialization): time 5.961e-05/0.01109, allocations: 0 / 0, free: 0 / 0
Notification: Performance of selectInitializationVariablesDAE (initialization): time 0.0001167/0.01121, allocations: 0 / 0, free: 0 / 0
Notification: Performance of collectPreVariables (initialization): time 4.205e-05/0.01125, allocations: 0 / 0, free: 0 / 0
Notification: Performance of collectInitialEqns (initialization): time 4.023e-05/0.01129, allocations: 0 / 0, free: 0 / 0
Notification: Performance of collectInitialBindings (initialization): time 5.401e-05/0.01134, allocations: 0 / 0, free: 0 / 0
Notification: Performance of simplifyInitialFunctions (initialization): time 8.642e-05/0.01143, allocations: 0 / 0, free: 0 / 0
Notification: Performance of setup shared object (initialization): time 9.728e-05/0.01153, allocations: 0 / 0, free: 0 / 0
Notification: Performance of preBalanceInitialSystem (initialization): time 7.246e-05/0.0116, allocations: 0 / 0, free: 0 / 0
Notification: Performance of partitionIndependentBlocks (initialization): time 7.161e-05/0.01167, allocations: 0 / 0, free: 0 / 0
Notification: Performance of analyzeInitialSystem (initialization): time 0.0001635/0.01184, allocations: 0 / 0, free: 0 / 0
Notification: Performance of solveInitialSystemEqSystem (initialization): time 3.427e-06/0.01184, allocations: 0 / 0, free: 0 / 0
Notification: Performance of matching and sorting (n=26) (initialization): time 0.0002327/0.01207, allocations: 0 / 0, free: 0 / 0
Notification: Performance of prepare postOptimizeDAE: time 3.729e-05/0.01211, allocations: 0 / 0, free: 0 / 0
Notification: Performance of postOpt simplifyComplexFunction (initialization): time 5.22e-06/0.01211, allocations: 0 / 0, free: 0 / 0
Notification: Performance of postOpt tearingSystem (initialization): time 1.682e-05/0.01213, allocations: 0 / 0, free: 0 / 0
Notification: Performance of postOpt solveSimpleEquations (initialization): time 9.16e-05/0.01222, allocations: 0 / 0, free: 0 / 0
Notification: Performance of postOpt calculateStrongComponentJacobians (initialization): time 9.818e-06/0.01223, allocations: 0 / 0, free: 0 / 0
Notification: Performance of postOpt simplifyAllExpressions (initialization): time 9.276e-05/0.01233, allocations: 0 / 0, free: 0 / 0
Notification: Performance of postOpt collapseArrayExpressions (initialization): time 2.492e-05/0.01235, allocations: 0 / 0, free: 0 / 0
Warning: Assuming fixed start value for the following 4 variables:
         SlewRateLimiter.y:DISCRETE(flow=false fixed = true )  \"Connector of Real output signal\" type: Real
         SlewRateLimiter.y_limited_by_rate:DISCRETE(fixed = true )  \"Limited value without absolute value limit\" type: Real
         SlewRateLimiter.y_rcbl_by_rate_min:DISCRETE(fixed = true )  \"Reachable output in next step if input is only limited by falling rate\" type: Real
         SlewRateLimiter.y_rcbl_by_rate_max:DISCRETE(fixed = true )  \"Reachable output in next step if input is only limited by rising rate\" type: Real
Notification: Performance of preBalanceInitialSystem (initialization_lambda0): time 0.0001156/0.01247, allocations: 0 / 0, free: 0 / 0
Notification: Performance of partitionIndependentBlocks (initialization_lambda0): time 6.322e-05/0.01253, allocations: 0 / 0, free: 0 / 0
Notification: Performance of analyzeInitialSystem (initialization_lambda0): time 0.0001447/0.01267, allocations: 0 / 0, free: 0 / 0
Notification: Performance of solveInitialSystemEqSystem (initialization_lambda0): time 3.006e-06/0.01268, allocations: 0 / 0, free: 0 / 0
Notification: Performance of matching and sorting (n=26) (initialization_lambda0): time 0.0002072/0.01288, allocations: 0 / 0, free: 0 / 0
Notification: Performance of prepare postOptimizeDAE: time 2.92e-05/0.01291, allocations: 0 / 0, free: 0 / 0
Notification: Performance of postOpt simplifyComplexFunction (initialization): time 4.168e-06/0.01292, allocations: 0 / 0, free: 0 / 0
Notification: Performance of postOpt tearingSystem (initialization): time 9.999e-06/0.01293, allocations: 0 / 0, free: 0 / 0
Notification: Performance of postOpt solveSimpleEquations (initialization): time 6.812e-05/0.013, allocations: 0 / 0, free: 0 / 0
Notification: Performance of postOpt calculateStrongComponentJacobians (initialization): time 6.492e-06/0.013, allocations: 0 / 0, free: 0 / 0
Notification: Performance of postOpt simplifyAllExpressions (initialization): time 8.574e-05/0.01309, allocations: 0 / 0, free: 0 / 0
Notification: Performance of postOpt collapseArrayExpressions (initialization): time 2.547e-05/0.01311, allocations: 0 / 0, free: 0 / 0
Warning: Assuming fixed start value for the following 4 variables:
         SlewRateLimiter.y:DISCRETE(flow=false fixed = true )  \"Connector of Real output signal\" type: Real
         SlewRateLimiter.y_limited_by_rate:DISCRETE(fixed = true )  \"Limited value without absolute value limit\" type: Real
         SlewRateLimiter.y_rcbl_by_rate_min:DISCRETE(fixed = true )  \"Reachable output in next step if input is only limited by falling rate\" type: Real
         SlewRateLimiter.y_rcbl_by_rate_max:DISCRETE(fixed = true )  \"Reachable output in next step if input is only limited by rising rate\" type: Real
Notification: Model statistics after passing the back-end for initialization:
 * Number of independent subsystems: 7
 * Number of states: 0 ()
 * Number of discrete variables: 21 ($PRE.SlewRateLimiter.y,SlewRateLimiter.y,$PRE.SlewRateLimiter.y_limited_by_rate,SlewRateLimiter.y_limited_by_rate,$PRE.SlewRateLimiter.y_rcbl_by_rate_min,SlewRateLimiter.y_rcbl_by_rate_min,$PRE.SlewRateLimiter.y_rcbl_by_rate_max,SlewRateLimiter.y_rcbl_by_rate_max,SlewRateLimiter.firstTrigger,$PRE.SlewRateLimiter.firstTrigger,SlewRateLimiter.sampleTrigger,$whenCondition4,$whenCondition3,$whenCondition1,Testdata.nextEventScaled,Testdata.nextEvent,$PRE.Testdata.nextEvent,Testdata.last,Testdata.b,Testdata.a,$whenCondition2)
 * Number of discrete states: 0 ()
 * Number of clocked states: 0 ()
 * Top-level inputs: 0
Notification: Strong component statistics for initialization (20):
 * Single equations (assignments): 18
 * Array equations: 0
 * Algorithm blocks: 2
 * Record equations: 0
 * When equations: 0
 * If-equations: 0
 * Equation systems (not torn): 0
 * Torn equation systems: 0
 * Mixed (continuous/discrete) equation systems: 0
Notification: Performance of prepare postOptimizeDAE: time 0.0001898/0.0133, allocations: 0 / 0, free: 0 / 0
Notification: Performance of postOpt lateInlineFunction (simulation): time 5.568e-05/0.01336, allocations: 0 / 0, free: 0 / 0
Notification: Performance of postOpt wrapFunctionCalls (simulation): time 6.995e-05/0.01343, allocations: 0 / 0, free: 0 / 0
Notification: Performance of postOpt inlineArrayEqn (simulation): time 3.146e-06/0.01343, allocations: 0 / 0, free: 0 / 0
Notification: Performance of postOpt constantLinearSystem (simulation): time 5.15e-06/0.01344, allocations: 0 / 0, free: 0 / 0
Notification: Performance of postOpt simplifysemiLinear (simulation): time 3.787e-06/0.01344, allocations: 0 / 0, free: 0 / 0
Notification: Performance of postOpt removeSimpleEquations (simulation): time 0.0006431/0.01408, allocations: 0 / 0, free: 0 / 0
Notification: Performance of postOpt simplifyComplexFunction (simulation): time 2.705e-06/0.01409, allocations: 0 / 0, free: 0 / 0
Notification: Performance of postOpt solveSimpleEquations (simulation): time 5.055e-05/0.01414, allocations: 0 / 0, free: 0 / 0
Notification: Performance of postOpt tearingSystem (simulation): time 3.848e-06/0.01414, allocations: 0 / 0, free: 0 / 0
Notification: Performance of postOpt inputDerivativesUsed (simulation): time 3.516e-05/0.01418, allocations: 0 / 0, free: 0 / 0
Notification: Performance of postOpt calculateStrongComponentJacobians (simulation): time 3.196e-06/0.01418, allocations: 0 / 0, free: 0 / 0
Notification: Performance of postOpt calculateStateSetsJacobians (simulation): time 2.114e-06/0.01418, allocations: 0 / 0, free: 0 / 0
Notification: Performance of postOpt symbolicJacobian (simulation): time 0.0004063/0.01459, allocations: 0 / 0, free: 0 / 0
Notification: Performance of postOpt removeConstants (simulation): time 3.683e-05/0.01462, allocations: 0 / 0, free: 0 / 0
Notification: Performance of postOpt simplifyTimeIndepFuncCalls (simulation): time 0.0001044/0.01473, allocations: 0 / 0, free: 0 / 0
Notification: Performance of postOpt simplifyAllExpressions (simulation): time 0.0001271/0.01486, allocations: 0 / 0, free: 0 / 0
Notification: Performance of postOpt findZeroCrossings (simulation): time 4.637e-05/0.0149, allocations: 0 / 0, free: 0 / 0
Notification: Performance of postOpt collapseArrayExpressions (simulation): time 3.317e-05/0.01494, allocations: 0 / 0, free: 0 / 0
Notification: Performance of sorting global known variables: time 7.155e-05/0.01501, allocations: 0 / 0, free: 0 / 0
Notification: Performance of sort global known variables: time 6.342e-06/0.01501, allocations: 0 / 0, free: 0 / 0
Notification: Performance of remove unused functions: time 0.0006722/0.01569, allocations: 0 / 0, free: 0 / 0
Notification: Model statistics after passing the back-end for simulation:
 * Number of independent subsystems: 1
 * Number of states: 1 (SlewRateLimiterClaRa.y_aux)
 * Number of discrete variables: 15 (SlewRateLimiter.sampleTrigger,$whenCondition1,$whenCondition2,$whenCondition3,$whenCondition4,SlewRateLimiter.firstTrigger,SlewRateLimiter.y,SlewRateLimiter.y_rcbl_by_rate_max,SlewRateLimiter.y_rcbl_by_rate_min,SlewRateLimiter.y_limited_by_rate,Testdata.a,Testdata.b,Testdata.last,Testdata.nextEvent,Testdata.nextEventScaled)
 * Number of discrete states: 12 (Testdata.nextEvent,Testdata.last,Testdata.nextEventScaled,Testdata.b,Testdata.a,$whenCondition2,$whenCondition4,SlewRateLimiter.y,SlewRateLimiter.y_limited_by_rate,SlewRateLimiter.y_rcbl_by_rate_min,SlewRateLimiter.y_rcbl_by_rate_max,$whenCondition3)
 * Number of clocked states: 0 ()
 * Top-level inputs: 0
Notification: Strong component statistics for simulation (9):
 * Single equations (assignments): 6
 * Array equations: 0
 * Algorithm blocks: 2
 * Record equations: 0
 * When equations: 1
 * If-equations: 0
 * Equation systems (not torn): 0
 * Torn equation systems: 0
 * Mixed (continuous/discrete) equation systems: 0
Notification: Performance of Backend phase and start with SimCode phase: time 0.0002805/0.01597, allocations: 0 / 0, free: 0 / 0
Notification: Performance of simCode: created initialization part: time 0.0003839/0.01635, allocations: 0 / 0, free: 0 / 0
Notification: Performance of simCode: created event and clocks part: time 8.957e-06/0.01636, allocations: 0 / 0, free: 0 / 0
Notification: Performance of simCode: created simulation system equations: time 0.0001279/0.01649, allocations: 0 / 0, free: 0 / 0
Notification: Performance of simCode: created of all other equations (e.g. parameter, nominal, assert, etc): time 0.00044/0.01693, allocations: 0 / 0, free: 0 / 0
Notification: Performance of simCode: created linear, non-linear and system jacobian parts: time 0.0004908/0.01742, allocations: 0 / 0, free: 0 / 0
Notification: Performance of simCode: some other stuff during SimCode phase: time 6.193e-05/0.01748, allocations: 0 / 0, free: 0 / 0
Notification: Performance of simCode: alias equations: time 5.678e-05/0.01754, allocations: 0 / 0, free: 0 / 0
Notification: Performance of simCode: all other stuff during SimCode phase: time 0.0001752/0.01771, allocations: 0 / 0, free: 0 / 0
Notification: Performance of SimCode: time 2.258e-05/0.01773, allocations: 0 / 0, free: 0 / 0
Notification: Performance of Templates: time 0.0009529/0.01869, allocations: 0 / 0, free: 0 / 0
"
[Timeout remaining time 900]
[Calling sys.exit(0), Time elapsed: 1.6913580019026995]