startTime=2.592e+06
stopTime=3.6288e+06
tolerance=1e-06
numberOfIntervals=2500
stepSize=414.72
wasm-jit simulation: simulate(Buildings.DHC.Loads.Cooling.Examples.BuildingTimeSeriesWithETS,startTime=2.592e+06,stopTime=3.6288e+06,tolerance=1e-06,numberOfIntervals=2500,outputFormat="mat",variableFilter="time|buiWitETS.bui.loa.y.[0-9,]+.|buiWitETS.ets.Q_flow|senMasFlo.m_flow|buiWitETS.ets.senMasFlo.m_flow|supChiWat.T|buiWitETS.ets.senTDisSup.T|buiWitETS.ets.senTDisRet.T|buiWitETS.ets.senTBuiSup.T",fileNamePrefix="Buildings_12_Buildings.DHC.Loads.Cooling.Examples.BuildingTimeSeriesWithETS",simflags="-abortSlowSimulation -alarm=240  -emit_protected -lv LOG_STATS")
LOG_STDOUT        | warning | Sparsity pattern for non-linear system 1 is not regular. This indicates that something went wrong during sparsity pattern generation. Removing sparsity pattern and disabling NLS scaling.
LOG_STDOUT        | info    | ... loading "tab1" from "/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Resources/Data/DHC/Loads/Examples/MediumOffice-90.1-2010-5A.mos"
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Fluid/HeatExchangers/BaseClasses/WetCoilUARated.mo:137:3-143:34:writable]
|                 | |       | The following assertion has been violated during initialization at time 2592000.000000
|                 | |       | ((buiWitETS.bui.terUniCoo.hexWetNtu.UAFroRated.isFulDry or buiWitETS.bui.terUniCoo.hexWetNtu.UAFroRated.isFulWet)) --> "In BuildingTimeSeriesWithETS.buiWitETS.bui.terUniCoo.hexWetNtu.UAFroRated: The nominal conditions correspond to a partially-wet coil regime. The modeling uncertainty under such conditions has not been assessed. Rather specify nominal conditions in fully-dry or fully-wet regime."
LOG_SUCCESS       | info    | The initialization finished successfully with 14 homotopy steps.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.1.0+maint.om/Fluid/Interfaces.mo:13:5-14:68:writable]
|                 | |       | The following assertion has been violated at time 2593658.880000
|                 | |       | ((buiWitETS.bui.disFloCoo.ports_a1[1].m_flow >= 0.0 and buiWitETS.bui.disFloCoo.ports_a1[1].m_flow <= 1e5)) --> "Variable violating min/max constraint: 0.0 <= buiWitETS.bui.disFloCoo.ports_a1[1].m_flow <= 1e5, has value: -8.94121e-30"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/DHC/Loads/BaseClasses/FlowDistribution.mo:105:3-109:84:writable]
|                 | |       | The following assertion has been violated at time 2593658.880000
|                 | |       | ((buiWitETS.bui.disFloCoo.mReq_flow[1] >= 0.0 and buiWitETS.bui.disFloCoo.mReq_flow[1] <= 1e5)) --> "Variable violating min/max constraint: 0.0 <= buiWitETS.bui.disFloCoo.mReq_flow[1] <= 1e5, has value: -8.94121e-30"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:101:3-101:89:writable]
|                 | |       | The following assertion has been violated at time 2593658.880000
|                 | |       | ((buiWitETS.bui.disFloCoo.pumFlo.etaHyd >= 0.0)) --> "Variable violating min constraint: 0.0 <= buiWitETS.bui.disFloCoo.pumFlo.etaHyd, has value: -1.06894e-30"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Fluid/Interfaces/PartialFourPortInterface.mo:23:3-24:84:writable]
|                 | |       | The following assertion has been violated at time 2593658.880000
|                 | |       | ((buiWitETS.bui.terUniCoo.hexWetNtu.m1_flow >= 0.0 and buiWitETS.bui.terUniCoo.hexWetNtu.m1_flow <= 1e5)) --> "Variable violating min/max constraint: 0.0 <= buiWitETS.bui.terUniCoo.hexWetNtu.m1_flow <= 1e5, has value: -1.97215e-31"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Fluid/HeatExchangers/WetCoilEffectivenessNTU.mo:68:3-73:35:writable]
|                 | |       | The following assertion has been violated at time 2594073.600000
|                 | |       | ((buiWitETS.bui.terUniCoo.hexWetNtu.SHR >= 0.0 and buiWitETS.bui.terUniCoo.hexWetNtu.SHR <= 1.0)) --> "Variable violating min/max constraint: 0.0 <= buiWitETS.bui.terUniCoo.hexWetNtu.SHR <= 1.0, has value: -5.99835e-37"
LOG_ASSERT        | debug   | /home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Utilities/Psychrometrics/Functions/sublimationPressureIce.mo:16: Invalid root: (-4.01054)^(-1.5)
LOG_STATS         | info    | ### STATISTICS ###
|                 | |       | | timer
|                 | |       | | |            0s          reading init.xml
|                 | |       | | |            0s          reading info.xml
|                 | |       | | |   8.3037e-05s [  0.0%] pre-initialization
|                 | |       | | |   0.00336334s [  1.4%] initialization
|                 | |       | | |            0s [  0.0%] steps
|                 | |       | | |   0.00929279s [  3.9%] solver (excl. callbacks)
|                 | |       | | |  0.000729214s [  0.3%] creating output-file
|                 | |       | | |   0.00439002s [  1.8%] event-handling
|                 | |       | | |            0s [  0.0%] overhead
|                 | |       | | |     0.222292s [ 92.6%] simulation
|                 | |       | | |      0.24015s [100.0%] total
|                 | |       | | events
|                 | |       | | |    24 state events
|                 | |       | | |     0 time events
|                 | |       | | solver: dassl
|                 | |       | | |  6456 steps taken
|                 | |       | | | 10781 calls of functionODE
|                 | |       | | |  1851 evaluations of jacobian
|                 | |       | | |   656 error test failures
|                 | |       | | |   187 convergence test failures
|                 | |       | | | 0.0487028s time of jacobian evaluation
LOG_SUCCESS       | info    | The simulation finished successfully.