Running: ./testmodel.py --libraries=/home/hudson/saved_omc/libraries/.openmodelica/libraries --ompython_omhome=/usr ThermofluidStream_ThermofluidStream.Examples.VaporCycle.conf.json
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.1.0+maint.om/package.mo", uses=false) [Timeout 180]
"Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.1.0+maint.om/package.mo): time 0.001269/0.001269, allocations: 85.17 kB / 19.87 MB, free: 4.617 MB / 18.57 MB
"
[Timeout remaining time 180]
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.1.0+maint.om/package.mo", uses=false) [Timeout 180]
"Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.1.0+maint.om/package.mo): time 0.001507/0.001507, allocations: 169 kB / 23.27 MB, free: 1.223 MB / 18.57 MB
"
[Timeout remaining time 180]
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.1.0+maint.om/package.mo", uses=false) [Timeout 180]
"Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.1.0+maint.om/package.mo): time 0.9552/0.9552, allocations: 177.1 MB / 203.7 MB, free: 5.512 MB / 186.7 MB
"
[Timeout remaining time 179]
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermofluidStream 1.4.0/package.mo", uses=false) [Timeout 180]
"Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermofluidStream 1.4.0/package.mo): time 0.752/0.752, allocations: 118.7 MB / 378.9 MB, free: 1.406 MB / 346.7 MB
"
[Timeout remaining time 179]
Using package ThermofluidStream with version 1.4.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/ThermofluidStream 1.4.0/package.mo)
Using package Modelica with version 4.1.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.1.0+maint.om/package.mo)
Using package Complex with version 4.1.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.1.0+maint.om/package.mo)
Using package ModelicaServices with version 4.1.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.1.0+maint.om/package.mo)
Running command: translateModel(ThermofluidStream.Examples.VaporCycle,tolerance=1e-06,outputFormat="mat",numberOfIntervals=1000,variableFilter="PI.x|PI1.x|PI_CompressorPressure.I.y|PI_CompressorTemperature.I.y|PI_Valve.x|Time|compressor.m_flow|condenser.thermalElementA.[0-9,]+..h|condenser.thermalElementB.[0-9,]+..h|evaporator.thermalElementA.[0-9,]+..h|evaporator.thermalElementB.[0-9,]+..h|firstOrderValve.y|multiSensor_Tp1.T|multiSensor_Tp1.p|receiver.M|receiver.U_med|source.outlet.m_flow|source1.outlet.m_flow",fileNamePrefix="ThermofluidStream_ThermofluidStream.Examples.VaporCycle")
translateModel(ThermofluidStream.Examples.VaporCycle,tolerance=1e-06,outputFormat="mat",numberOfIntervals=1000,variableFilter="PI.x|PI1.x|PI_CompressorPressure.I.y|PI_CompressorTemperature.I.y|PI_Valve.x|Time|compressor.m_flow|condenser.thermalElementA.[0-9,]+..h|condenser.thermalElementB.[0-9,]+..h|evaporator.thermalElementA.[0-9,]+..h|evaporator.thermalElementB.[0-9,]+..h|firstOrderValve.y|multiSensor_Tp1.T|multiSensor_Tp1.p|receiver.M|receiver.U_med|source.outlet.m_flow|source1.outlet.m_flow",fileNamePrefix="ThermofluidStream_ThermofluidStream.Examples.VaporCycle") [Timeout 660]
"Notification: Performance of FrontEnd - loaded program: time 2.114e-06/2.114e-06, allocations: 0 / 484.1 MB, free: 8.102 MB / 410.7 MB
Notification: Performance of FrontEnd - Absyn->SCode: time 2.217e-05/2.429e-05, allocations: 2.312 kB / 484.1 MB, free: 8.098 MB / 410.7 MB
Notification: Performance of NFInst.instantiate(ThermofluidStream.Examples.VaporCycle): time 0.1616/0.1616, allocations: 166.2 MB / 0.635 GB, free: 9.703 MB / 0.5573 GB
Notification: Performance of NFInst.instExpressions: time 0.3803/0.5419, allocations: 25.21 MB / 0.6596 GB, free: 12.22 MB / 0.5573 GB
Notification: Performance of NFInst.updateImplicitVariability: time 0.005214/0.5471, allocations: 197.6 kB / 0.6598 GB, free: 12.22 MB / 0.5573 GB
Notification: Performance of NFTyping.typeComponents: time 0.004362/0.5515, allocations: 0.8875 MB / 0.6607 GB, free: 12.22 MB / 0.5573 GB
Notification: Performance of NFTyping.typeBindings: time 0.01643/0.5679, allocations: 4.776 MB / 0.6653 GB, free: 11.96 MB / 0.5573 GB
Notification: Performance of NFTyping.typeClassSections: time 0.01078/0.5787, allocations: 3.353 MB / 0.6686 GB, free: 11.73 MB / 0.5573 GB
Notification: Performance of NFFlatten.flatten: time 0.02473/0.6034, allocations: 20.14 MB / 0.6883 GB, free: 6.117 MB / 0.5573 GB
Notification: Performance of NFFlatten.resolveConnections: time 0.006953/0.6104, allocations: 2.092 MB / 0.6903 GB, free: 21.59 MB / 0.573 GB
Notification: Performance of NFEvalConstants.evaluate: time 0.03378/0.6442, allocations: 10.56 MB / 0.7006 GB, free: 20.71 MB / 0.573 GB
Notification: Performance of NFSimplifyModel.simplify: time 0.0153/0.6595, allocations: 6.659 MB / 0.7071 GB, free: 18.72 MB / 0.573 GB
Notification: Performance of NFPackage.collectConstants: time 0.006376/0.6658, allocations: 1.119 MB / 0.7082 GB, free: 18.72 MB / 0.573 GB
Notification: Performance of NFFlatten.collectFunctions: time 0.02253/0.6884, allocations: 7.923 MB / 0.716 GB, free: 17.85 MB / 0.573 GB
Notification: Performance of NFScalarize.scalarize: time 0.005804/0.6942, allocations: 2.687 MB / 0.7186 GB, free: 16.15 MB / 0.573 GB
Notification: Performance of NFVerifyModel.verify: time 0.01675/0.7109, allocations: 4.635 MB / 0.7231 GB, free: 14.46 MB / 0.573 GB
Notification: Performance of NFConvertDAE.convert: time 0.04349/0.7544, allocations: 17.08 MB / 0.7398 GB, free: 4.723 MB / 0.573 GB
Notification: Performance of FrontEnd - DAE generated: time 1.224e-05/0.7544, allocations: 0 / 0.7398 GB, free: 4.723 MB / 0.573 GB
Notification: Performance of FrontEnd: time 2.986e-06/0.7544, allocations: 0 / 0.7398 GB, free: 4.723 MB / 0.573 GB
Notification: Performance of Transformations before backend: time 0.0008786/0.7553, allocations: 1.031 kB / 0.7398 GB, free: 4.723 MB / 0.573 GB
Notification: Model statistics after passing the front-end and creating the data structures used by the back-end:
 * Number of equations: 2304
 * Number of variables: 2304
Notification: Performance of Generate backend data structure: time 0.03228/0.7876, allocations: 14.32 MB / 0.7538 GB, free: 7.184 MB / 0.5886 GB
Notification: Performance of prepare preOptimizeDAE: time 5.238e-05/0.7876, allocations: 12.02 kB / 0.7538 GB, free: 7.172 MB / 0.5886 GB
Notification: Performance of preOpt normalInlineFunction (simulation): time 0.01435/0.802, allocations: 4.402 MB / 0.7581 GB, free: 2.766 MB / 0.5886 GB
Notification: Performance of preOpt evaluateParameters (simulation): time 0.01511/0.8171, allocations: 6.314 MB / 0.7643 GB, free: 12.8 MB / 0.6042 GB
Notification: Performance of preOpt simplifyIfEquations (simulation): time 0.0007974/0.8179, allocations: 0.7076 MB / 0.765 GB, free: 12.08 MB / 0.6042 GB
Notification: Performance of preOpt expandDerOperator (simulation): time 0.003066/0.821, allocations: 0.8693 MB / 0.7658 GB, free: 11.22 MB / 0.6042 GB
Notification: Performance of preOpt clockPartitioning (simulation): time 0.02161/0.8426, allocations: 8.62 MB / 0.7742 GB, free: 2.465 MB / 0.6042 GB
Notification: Performance of preOpt findStateOrder (simulation): time 0.0001536/0.8427, allocations: 3.188 kB / 0.7742 GB, free: 2.465 MB / 0.6042 GB
Notification: Performance of preOpt replaceEdgeChange (simulation): time 0.001566/0.8443, allocations: 345 kB / 0.7746 GB, free: 2.129 MB / 0.6042 GB
Notification: Performance of preOpt inlineArrayEqn (simulation): time 0.0001821/0.8445, allocations: 279.7 kB / 0.7748 GB, free: 1.859 MB / 0.6042 GB
Notification: Performance of preOpt removeEqualRHS (simulation): time 0.01223/0.8567, allocations: 3.484 MB / 0.7782 GB, free: 14.36 MB / 0.6198 GB
Warning: The model contains alias variables with redundant start and/or conflicting nominal values. It is recommended to resolve the conflicts, because otherwise the system could be hard to solve. To print the conflicting alias sets and the chosen candidates please use -d=aliasConflicts.
Notification: Performance of preOpt removeSimpleEquations (simulation): time 0.06876/0.9255, allocations: 26.59 MB / 0.8042 GB, free: 4.996 MB / 0.6355 GB
Notification: Performance of preOpt comSubExp (simulation): time 0.008829/0.9343, allocations: 3.708 MB / 0.8078 GB, free: 1.43 MB / 0.6355 GB
Notification: Performance of preOpt resolveLoops (simulation): time 0.004709/0.939, allocations: 1.746 MB / 0.8095 GB, free: 15.71 MB / 0.6511 GB
Notification: Performance of preOpt evalFunc (simulation): time 0.00348/0.9425, allocations: 2.018 MB / 0.8115 GB, free: 13.8 MB / 0.6511 GB
Notification: Performance of preOpt encapsulateWhenConditions (simulation): time 0.0001405/0.9426, allocations: 133.2 kB / 0.8116 GB, free: 13.66 MB / 0.6511 GB
Notification: Performance of pre-optimization done (n=888): time 9.879e-06/0.9426, allocations: 0 / 0.8116 GB, free: 13.66 MB / 0.6511 GB
Notification: Performance of matching and sorting (n=892): time 0.04222/0.9848, allocations: 13.94 MB / 0.8252 GB, free: 15.73 MB / 0.6667 GB
Notification: Performance of inlineWhenForInitialization (initialization): time 0.0005476/0.9854, allocations: 283.2 kB / 0.8255 GB, free: 15.41 MB / 0.6667 GB
Notification: Performance of selectInitializationVariablesDAE (initialization): time 0.01064/0.996, allocations: 5.979 MB / 0.8313 GB, free: 10.47 MB / 0.6667 GB
Notification: Performance of collectPreVariables (initialization): time 0.002138/0.9982, allocations: 157.7 kB / 0.8315 GB, free: 10.31 MB / 0.6667 GB
Notification: Performance of collectInitialEqns (initialization): time 0.003303/1.001, allocations: 4.734 MB / 0.8361 GB, free: 5.863 MB / 0.6667 GB
Notification: Performance of collectInitialBindings (initialization): time 0.004601/1.006, allocations: 3.325 MB / 0.8394 GB, free: 2.723 MB / 0.6667 GB
Notification: Performance of simplifyInitialFunctions (initialization): time 0.005459/1.012, allocations: 2.078 MB / 0.8414 GB, free: 0.8242 MB / 0.6667 GB
Notification: Performance of setup shared object (initialization): time 0.0001251/1.012, allocations: 480.9 kB / 0.8419 GB, free: 364 kB / 0.6667 GB
Notification: Performance of preBalanceInitialSystem (initialization): time 0.003324/1.015, allocations: 1.346 MB / 0.8432 GB, free: 15 MB / 0.6823 GB
Notification: Performance of partitionIndependentBlocks (initialization): time 0.004511/1.02, allocations: 3.739 MB / 0.8468 GB, free: 10.71 MB / 0.6823 GB
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[1].deltaE_system = $START.condenser.thermalElementB[1].deltaE_system (0.0 = $START.condenser.thermalElementB[1].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[2].deltaE_system = $START.condenser.thermalElementB[2].deltaE_system (0.0 = $START.condenser.thermalElementB[2].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[3].deltaE_system = $START.condenser.thermalElementB[3].deltaE_system (0.0 = $START.condenser.thermalElementB[3].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[4].deltaE_system = $START.condenser.thermalElementB[4].deltaE_system (0.0 = $START.condenser.thermalElementB[4].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[5].deltaE_system = $START.condenser.thermalElementB[5].deltaE_system (0.0 = $START.condenser.thermalElementB[5].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[6].deltaE_system = $START.condenser.thermalElementB[6].deltaE_system (0.0 = $START.condenser.thermalElementB[6].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[7].deltaE_system = $START.condenser.thermalElementB[7].deltaE_system (0.0 = $START.condenser.thermalElementB[7].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[8].deltaE_system = $START.condenser.thermalElementB[8].deltaE_system (0.0 = $START.condenser.thermalElementB[8].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[9].deltaE_system = $START.condenser.thermalElementB[9].deltaE_system (0.0 = $START.condenser.thermalElementB[9].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[10].deltaE_system = $START.condenser.thermalElementB[10].deltaE_system (0.0 = $START.condenser.thermalElementB[10].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[1].deltaE_system = $START.condenser.thermalElementA[1].deltaE_system (0.0 = $START.condenser.thermalElementA[1].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[2].deltaE_system = $START.condenser.thermalElementA[2].deltaE_system (0.0 = $START.condenser.thermalElementA[2].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[3].deltaE_system = $START.condenser.thermalElementA[3].deltaE_system (0.0 = $START.condenser.thermalElementA[3].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[4].deltaE_system = $START.condenser.thermalElementA[4].deltaE_system (0.0 = $START.condenser.thermalElementA[4].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[5].deltaE_system = $START.condenser.thermalElementA[5].deltaE_system (0.0 = $START.condenser.thermalElementA[5].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[6].deltaE_system = $START.condenser.thermalElementA[6].deltaE_system (0.0 = $START.condenser.thermalElementA[6].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[7].deltaE_system = $START.condenser.thermalElementA[7].deltaE_system (0.0 = $START.condenser.thermalElementA[7].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[8].deltaE_system = $START.condenser.thermalElementA[8].deltaE_system (0.0 = $START.condenser.thermalElementA[8].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[9].deltaE_system = $START.condenser.thermalElementA[9].deltaE_system (0.0 = $START.condenser.thermalElementA[9].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[10].deltaE_system = $START.condenser.thermalElementA[10].deltaE_system (0.0 = $START.condenser.thermalElementA[10].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[1].deltaE_system = $START.evaporator.thermalElementB[1].deltaE_system (0.0 = $START.evaporator.thermalElementB[1].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[2].deltaE_system = $START.evaporator.thermalElementB[2].deltaE_system (0.0 = $START.evaporator.thermalElementB[2].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[3].deltaE_system = $START.evaporator.thermalElementB[3].deltaE_system (0.0 = $START.evaporator.thermalElementB[3].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[4].deltaE_system = $START.evaporator.thermalElementB[4].deltaE_system (0.0 = $START.evaporator.thermalElementB[4].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[5].deltaE_system = $START.evaporator.thermalElementB[5].deltaE_system (0.0 = $START.evaporator.thermalElementB[5].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[6].deltaE_system = $START.evaporator.thermalElementB[6].deltaE_system (0.0 = $START.evaporator.thermalElementB[6].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[7].deltaE_system = $START.evaporator.thermalElementB[7].deltaE_system (0.0 = $START.evaporator.thermalElementB[7].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[8].deltaE_system = $START.evaporator.thermalElementB[8].deltaE_system (0.0 = $START.evaporator.thermalElementB[8].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[9].deltaE_system = $START.evaporator.thermalElementB[9].deltaE_system (0.0 = $START.evaporator.thermalElementB[9].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[10].deltaE_system = $START.evaporator.thermalElementB[10].deltaE_system (0.0 = $START.evaporator.thermalElementB[10].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[1].deltaE_system = $START.evaporator.thermalElementA[1].deltaE_system (0.0 = $START.evaporator.thermalElementA[1].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[2].deltaE_system = $START.evaporator.thermalElementA[2].deltaE_system (0.0 = $START.evaporator.thermalElementA[2].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[3].deltaE_system = $START.evaporator.thermalElementA[3].deltaE_system (0.0 = $START.evaporator.thermalElementA[3].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[4].deltaE_system = $START.evaporator.thermalElementA[4].deltaE_system (0.0 = $START.evaporator.thermalElementA[4].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[5].deltaE_system = $START.evaporator.thermalElementA[5].deltaE_system (0.0 = $START.evaporator.thermalElementA[5].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[6].deltaE_system = $START.evaporator.thermalElementA[6].deltaE_system (0.0 = $START.evaporator.thermalElementA[6].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[7].deltaE_system = $START.evaporator.thermalElementA[7].deltaE_system (0.0 = $START.evaporator.thermalElementA[7].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[8].deltaE_system = $START.evaporator.thermalElementA[8].deltaE_system (0.0 = $START.evaporator.thermalElementA[8].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[9].deltaE_system = $START.evaporator.thermalElementA[9].deltaE_system (0.0 = $START.evaporator.thermalElementA[9].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[10].deltaE_system = $START.evaporator.thermalElementA[10].deltaE_system (0.0 = $START.evaporator.thermalElementA[10].deltaE_system)
Notification: Performance of analyzeInitialSystem (initialization): time 0.01081/1.03, allocations: 6.017 MB / 0.8527 GB, free: 4.352 MB / 0.6823 GB
Notification: Performance of solveInitialSystemEqSystem (initialization): time 5.58e-05/1.03, allocations: 15.94 kB / 0.8527 GB, free: 4.336 MB / 0.6823 GB
Notification: Performance of matching and sorting (n=1125) (initialization): time 0.01728/1.048, allocations: 7.336 MB / 0.8599 GB, free: 13.18 MB / 0.698 GB
Notification: Performance of prepare postOptimizeDAE: time 5.28e-05/1.048, allocations: 20 kB / 0.8599 GB, free: 13.16 MB / 0.698 GB
Notification: Performance of postOpt simplifyComplexFunction (initialization): time 7.264e-05/1.048, allocations: 36 kB / 0.8599 GB, free: 13.13 MB / 0.698 GB
Notification: Performance of postOpt tearingSystem (initialization): time 0.004524/1.052, allocations: 1.401 MB / 0.8613 GB, free: 11.67 MB / 0.698 GB
Notification: Performance of postOpt solveSimpleEquations (initialization): time 0.006389/1.059, allocations: 1.831 MB / 0.8631 GB, free: 9.922 MB / 0.698 GB
Notification: Performance of postOpt calculateStrongComponentJacobians (initialization): time 0.7163/1.775, allocations: 51.7 MB / 0.9136 GB, free: 130.3 MB / 0.7293 GB
Notification: Performance of postOpt simplifyAllExpressions (initialization): time 0.008269/1.783, allocations: 333.9 kB / 0.9139 GB, free: 130.3 MB / 0.7293 GB
Notification: Performance of postOpt collapseArrayExpressions (initialization): time 0.004586/1.788, allocations: 0.6108 MB / 0.9145 GB, free: 130.3 MB / 0.7293 GB
Warning: The initial conditions are over specified. The following 40 initial equations are redundant, so they are removed from the initialization system:
         condenser.thermalElementB[1].deltaE_system = $START.condenser.thermalElementB[1].deltaE_system
         condenser.thermalElementB[2].deltaE_system = $START.condenser.thermalElementB[2].deltaE_system
         condenser.thermalElementB[3].deltaE_system = $START.condenser.thermalElementB[3].deltaE_system
         condenser.thermalElementB[4].deltaE_system = $START.condenser.thermalElementB[4].deltaE_system
         condenser.thermalElementB[5].deltaE_system = $START.condenser.thermalElementB[5].deltaE_system
         condenser.thermalElementB[6].deltaE_system = $START.condenser.thermalElementB[6].deltaE_system
         condenser.thermalElementB[7].deltaE_system = $START.condenser.thermalElementB[7].deltaE_system
         condenser.thermalElementB[8].deltaE_system = $START.condenser.thermalElementB[8].deltaE_system
         condenser.thermalElementB[9].deltaE_system = $START.condenser.thermalElementB[9].deltaE_system
         condenser.thermalElementB[10].deltaE_system = $START.condenser.thermalElementB[10].deltaE_system
         condenser.thermalElementA[1].deltaE_system = $START.condenser.thermalElementA[1].deltaE_system
         condenser.thermalElementA[2].deltaE_system = $START.condenser.thermalElementA[2].deltaE_system
         condenser.thermalElementA[3].deltaE_system = $START.condenser.thermalElementA[3].deltaE_system
         condenser.thermalElementA[4].deltaE_system = $START.condenser.thermalElementA[4].deltaE_system
         condenser.thermalElementA[5].deltaE_system = $START.condenser.thermalElementA[5].deltaE_system
         condenser.thermalElementA[6].deltaE_system = $START.condenser.thermalElementA[6].deltaE_system
         condenser.thermalElementA[7].deltaE_system = $START.condenser.thermalElementA[7].deltaE_system
         condenser.thermalElementA[8].deltaE_system = $START.condenser.thermalElementA[8].deltaE_system
         condenser.thermalElementA[9].deltaE_system = $START.condenser.thermalElementA[9].deltaE_system
         condenser.thermalElementA[10].deltaE_system = $START.condenser.thermalElementA[10].deltaE_system
         evaporator.thermalElementB[1].deltaE_system = $START.evaporator.thermalElementB[1].deltaE_system
         evaporator.thermalElementB[2].deltaE_system = $START.evaporator.thermalElementB[2].deltaE_system
         evaporator.thermalElementB[3].deltaE_system = $START.evaporator.thermalElementB[3].deltaE_system
         evaporator.thermalElementB[4].deltaE_system = $START.evaporator.thermalElementB[4].deltaE_system
         evaporator.thermalElementB[5].deltaE_system = $START.evaporator.thermalElementB[5].deltaE_system
         evaporator.thermalElementB[6].deltaE_system = $START.evaporator.thermalElementB[6].deltaE_system
         evaporator.thermalElementB[7].deltaE_system = $START.evaporator.thermalElementB[7].deltaE_system
         evaporator.thermalElementB[8].deltaE_system = $START.evaporator.thermalElementB[8].deltaE_system
         evaporator.thermalElementB[9].deltaE_system = $START.evaporator.thermalElementB[9].deltaE_system
         evaporator.thermalElementB[10].deltaE_system = $START.evaporator.thermalElementB[10].deltaE_system
         evaporator.thermalElementA[1].deltaE_system = $START.evaporator.thermalElementA[1].deltaE_system
         evaporator.thermalElementA[2].deltaE_system = $START.evaporator.thermalElementA[2].deltaE_system
         evaporator.thermalElementA[3].deltaE_system = $START.evaporator.thermalElementA[3].deltaE_system
         evaporator.thermalElementA[4].deltaE_system = $START.evaporator.thermalElementA[4].deltaE_system
         evaporator.thermalElementA[5].deltaE_system = $START.evaporator.thermalElementA[5].deltaE_system
         evaporator.thermalElementA[6].deltaE_system = $START.evaporator.thermalElementA[6].deltaE_system
         evaporator.thermalElementA[7].deltaE_system = $START.evaporator.thermalElementA[7].deltaE_system
         evaporator.thermalElementA[8].deltaE_system = $START.evaporator.thermalElementA[8].deltaE_system
         evaporator.thermalElementA[9].deltaE_system = $START.evaporator.thermalElementA[9].deltaE_system
         evaporator.thermalElementA[10].deltaE_system = $START.evaporator.thermalElementA[10].deltaE_system.
Notification: Performance of preBalanceInitialSystem (initialization_lambda0): time 0.0101/1.798, allocations: 1.861 MB / 0.9163 GB, free: 130 MB / 0.7293 GB
Notification: Performance of partitionIndependentBlocks (initialization_lambda0): time 0.006538/1.804, allocations: 3.729 MB / 0.9199 GB, free: 127.7 MB / 0.7293 GB
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[1].deltaE_system = $START.condenser.thermalElementB[1].deltaE_system (0.0 = $START.condenser.thermalElementB[1].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[2].deltaE_system = $START.condenser.thermalElementB[2].deltaE_system (0.0 = $START.condenser.thermalElementB[2].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[3].deltaE_system = $START.condenser.thermalElementB[3].deltaE_system (0.0 = $START.condenser.thermalElementB[3].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[4].deltaE_system = $START.condenser.thermalElementB[4].deltaE_system (0.0 = $START.condenser.thermalElementB[4].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[5].deltaE_system = $START.condenser.thermalElementB[5].deltaE_system (0.0 = $START.condenser.thermalElementB[5].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[6].deltaE_system = $START.condenser.thermalElementB[6].deltaE_system (0.0 = $START.condenser.thermalElementB[6].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[7].deltaE_system = $START.condenser.thermalElementB[7].deltaE_system (0.0 = $START.condenser.thermalElementB[7].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[8].deltaE_system = $START.condenser.thermalElementB[8].deltaE_system (0.0 = $START.condenser.thermalElementB[8].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[9].deltaE_system = $START.condenser.thermalElementB[9].deltaE_system (0.0 = $START.condenser.thermalElementB[9].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementB[10].deltaE_system = $START.condenser.thermalElementB[10].deltaE_system (0.0 = $START.condenser.thermalElementB[10].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[1].deltaE_system = $START.condenser.thermalElementA[1].deltaE_system (0.0 = $START.condenser.thermalElementA[1].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[2].deltaE_system = $START.condenser.thermalElementA[2].deltaE_system (0.0 = $START.condenser.thermalElementA[2].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[3].deltaE_system = $START.condenser.thermalElementA[3].deltaE_system (0.0 = $START.condenser.thermalElementA[3].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[4].deltaE_system = $START.condenser.thermalElementA[4].deltaE_system (0.0 = $START.condenser.thermalElementA[4].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[5].deltaE_system = $START.condenser.thermalElementA[5].deltaE_system (0.0 = $START.condenser.thermalElementA[5].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[6].deltaE_system = $START.condenser.thermalElementA[6].deltaE_system (0.0 = $START.condenser.thermalElementA[6].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[7].deltaE_system = $START.condenser.thermalElementA[7].deltaE_system (0.0 = $START.condenser.thermalElementA[7].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[8].deltaE_system = $START.condenser.thermalElementA[8].deltaE_system (0.0 = $START.condenser.thermalElementA[8].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[9].deltaE_system = $START.condenser.thermalElementA[9].deltaE_system (0.0 = $START.condenser.thermalElementA[9].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: condenser.thermalElementA[10].deltaE_system = $START.condenser.thermalElementA[10].deltaE_system (0.0 = $START.condenser.thermalElementA[10].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[1].deltaE_system = $START.evaporator.thermalElementB[1].deltaE_system (0.0 = $START.evaporator.thermalElementB[1].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[2].deltaE_system = $START.evaporator.thermalElementB[2].deltaE_system (0.0 = $START.evaporator.thermalElementB[2].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[3].deltaE_system = $START.evaporator.thermalElementB[3].deltaE_system (0.0 = $START.evaporator.thermalElementB[3].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[4].deltaE_system = $START.evaporator.thermalElementB[4].deltaE_system (0.0 = $START.evaporator.thermalElementB[4].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[5].deltaE_system = $START.evaporator.thermalElementB[5].deltaE_system (0.0 = $START.evaporator.thermalElementB[5].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[6].deltaE_system = $START.evaporator.thermalElementB[6].deltaE_system (0.0 = $START.evaporator.thermalElementB[6].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[7].deltaE_system = $START.evaporator.thermalElementB[7].deltaE_system (0.0 = $START.evaporator.thermalElementB[7].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[8].deltaE_system = $START.evaporator.thermalElementB[8].deltaE_system (0.0 = $START.evaporator.thermalElementB[8].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[9].deltaE_system = $START.evaporator.thermalElementB[9].deltaE_system (0.0 = $START.evaporator.thermalElementB[9].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementB[10].deltaE_system = $START.evaporator.thermalElementB[10].deltaE_system (0.0 = $START.evaporator.thermalElementB[10].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[1].deltaE_system = $START.evaporator.thermalElementA[1].deltaE_system (0.0 = $START.evaporator.thermalElementA[1].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[2].deltaE_system = $START.evaporator.thermalElementA[2].deltaE_system (0.0 = $START.evaporator.thermalElementA[2].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[3].deltaE_system = $START.evaporator.thermalElementA[3].deltaE_system (0.0 = $START.evaporator.thermalElementA[3].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[4].deltaE_system = $START.evaporator.thermalElementA[4].deltaE_system (0.0 = $START.evaporator.thermalElementA[4].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[5].deltaE_system = $START.evaporator.thermalElementA[5].deltaE_system (0.0 = $START.evaporator.thermalElementA[5].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[6].deltaE_system = $START.evaporator.thermalElementA[6].deltaE_system (0.0 = $START.evaporator.thermalElementA[6].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[7].deltaE_system = $START.evaporator.thermalElementA[7].deltaE_system (0.0 = $START.evaporator.thermalElementA[7].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[8].deltaE_system = $START.evaporator.thermalElementA[8].deltaE_system (0.0 = $START.evaporator.thermalElementA[8].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[9].deltaE_system = $START.evaporator.thermalElementA[9].deltaE_system (0.0 = $START.evaporator.thermalElementA[9].deltaE_system)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: evaporator.thermalElementA[10].deltaE_system = $START.evaporator.thermalElementA[10].deltaE_system (0.0 = $START.evaporator.thermalElementA[10].deltaE_system)
Notification: Performance of analyzeInitialSystem (initialization_lambda0): time 0.01352/1.818, allocations: 6.012 MB / 0.9258 GB, free: 125.6 MB / 0.7293 GB
Notification: Performance of solveInitialSystemEqSystem (initialization_lambda0): time 0.0001153/1.818, allocations: 10.97 kB / 0.9258 GB, free: 125.6 MB / 0.7293 GB
Notification: Performance of matching and sorting (n=1125) (initialization_lambda0): time 0.03002/1.848, allocations: 7.317 MB / 0.933 GB, free: 125 MB / 0.7293 GB
Notification: Performance of prepare postOptimizeDAE: time 5.041e-05/1.848, allocations: 21.22 kB / 0.933 GB, free: 125 MB / 0.7293 GB
Notification: Performance of postOpt simplifyComplexFunction (initialization): time 9.651e-05/1.848, allocations: 41.53 kB / 0.933 GB, free: 125 MB / 0.7293 GB
Notification: Performance of postOpt tearingSystem (initialization): time 0.004603/1.853, allocations: 1.405 MB / 0.9344 GB, free: 124.7 MB / 0.7293 GB
Notification: Performance of postOpt solveSimpleEquations (initialization): time 0.006049/1.859, allocations: 1.825 MB / 0.9362 GB, free: 124.7 MB / 0.7293 GB
Notification: Performance of postOpt calculateStrongComponentJacobians (initialization): time 0.02996/1.889, allocations: 51.69 MB / 0.9867 GB, free: 80.94 MB / 0.7293 GB
Notification: Performance of postOpt simplifyAllExpressions (initialization): time 0.007688/1.897, allocations: 335.8 kB / 0.987 GB, free: 80.94 MB / 0.7293 GB
Notification: Performance of postOpt collapseArrayExpressions (initialization): time 0.002597/1.899, allocations: 0.6044 MB / 0.9876 GB, free: 80.94 MB / 0.7293 GB
Warning: The initial conditions are over specified. The following 40 initial equations are redundant, so they are removed from the initialization_lambda0 system:
         condenser.thermalElementB[1].deltaE_system = $START.condenser.thermalElementB[1].deltaE_system
         condenser.thermalElementB[2].deltaE_system = $START.condenser.thermalElementB[2].deltaE_system
         condenser.thermalElementB[3].deltaE_system = $START.condenser.thermalElementB[3].deltaE_system
         condenser.thermalElementB[4].deltaE_system = $START.condenser.thermalElementB[4].deltaE_system
         condenser.thermalElementB[5].deltaE_system = $START.condenser.thermalElementB[5].deltaE_system
         condenser.thermalElementB[6].deltaE_system = $START.condenser.thermalElementB[6].deltaE_system
         condenser.thermalElementB[7].deltaE_system = $START.condenser.thermalElementB[7].deltaE_system
         condenser.thermalElementB[8].deltaE_system = $START.condenser.thermalElementB[8].deltaE_system
         condenser.thermalElementB[9].deltaE_system = $START.condenser.thermalElementB[9].deltaE_system
         condenser.thermalElementB[10].deltaE_system = $START.condenser.thermalElementB[10].deltaE_system
         condenser.thermalElementA[1].deltaE_system = $START.condenser.thermalElementA[1].deltaE_system
         condenser.thermalElementA[2].deltaE_system = $START.condenser.thermalElementA[2].deltaE_system
         condenser.thermalElementA[3].deltaE_system = $START.condenser.thermalElementA[3].deltaE_system
         condenser.thermalElementA[4].deltaE_system = $START.condenser.thermalElementA[4].deltaE_system
         condenser.thermalElementA[5].deltaE_system = $START.condenser.thermalElementA[5].deltaE_system
         condenser.thermalElementA[6].deltaE_system = $START.condenser.thermalElementA[6].deltaE_system
         condenser.thermalElementA[7].deltaE_system = $START.condenser.thermalElementA[7].deltaE_system
         condenser.thermalElementA[8].deltaE_system = $START.condenser.thermalElementA[8].deltaE_system
         condenser.thermalElementA[9].deltaE_system = $START.condenser.thermalElementA[9].deltaE_system
         condenser.thermalElementA[10].deltaE_system = $START.condenser.thermalElementA[10].deltaE_system
         evaporator.thermalElementB[1].deltaE_system = $START.evaporator.thermalElementB[1].deltaE_system
         evaporator.thermalElementB[2].deltaE_system = $START.evaporator.thermalElementB[2].deltaE_system
         evaporator.thermalElementB[3].deltaE_system = $START.evaporator.thermalElementB[3].deltaE_system
         evaporator.thermalElementB[4].deltaE_system = $START.evaporator.thermalElementB[4].deltaE_system
         evaporator.thermalElementB[5].deltaE_system = $START.evaporator.thermalElementB[5].deltaE_system
         evaporator.thermalElementB[6].deltaE_system = $START.evaporator.thermalElementB[6].deltaE_system
         evaporator.thermalElementB[7].deltaE_system = $START.evaporator.thermalElementB[7].deltaE_system
         evaporator.thermalElementB[8].deltaE_system = $START.evaporator.thermalElementB[8].deltaE_system
         evaporator.thermalElementB[9].deltaE_system = $START.evaporator.thermalElementB[9].deltaE_system
         evaporator.thermalElementB[10].deltaE_system = $START.evaporator.thermalElementB[10].deltaE_system
         evaporator.thermalElementA[1].deltaE_system = $START.evaporator.thermalElementA[1].deltaE_system
         evaporator.thermalElementA[2].deltaE_system = $START.evaporator.thermalElementA[2].deltaE_system
         evaporator.thermalElementA[3].deltaE_system = $START.evaporator.thermalElementA[3].deltaE_system
         evaporator.thermalElementA[4].deltaE_system = $START.evaporator.thermalElementA[4].deltaE_system
         evaporator.thermalElementA[5].deltaE_system = $START.evaporator.thermalElementA[5].deltaE_system
         evaporator.thermalElementA[6].deltaE_system = $START.evaporator.thermalElementA[6].deltaE_system
         evaporator.thermalElementA[7].deltaE_system = $START.evaporator.thermalElementA[7].deltaE_system
         evaporator.thermalElementA[8].deltaE_system = $START.evaporator.thermalElementA[8].deltaE_system
         evaporator.thermalElementA[9].deltaE_system = $START.evaporator.thermalElementA[9].deltaE_system
         evaporator.thermalElementA[10].deltaE_system = $START.evaporator.thermalElementA[10].deltaE_system.
Notification: Model statistics after passing the back-end for initialization:
 * Number of independent subsystems: 160
 * Number of states: 0 ()
 * Number of discrete variables: 46 (PI_CompressorTemperature.I.local_reset,PI_CompressorPressure.I.local_reset,singleSensorSelect5.inlet.state.phase,singleSensorSelect4.inlet.state.phase,singleSensorSelect3.inlet.state.phase,singleSensorSelect2.inlet.state.phase,singleSensorSelect1.inlet.state.phase,evaporator.thermalElementB[10].state.phase,evaporator.thermalElementB[9].state.phase,evaporator.thermalElementB[9].outlet.state.phase,evaporator.thermalElementB[8].state.phase,evaporator.thermalElementB[8].outlet.state.phase,evaporator.thermalElementB[7].state.phase,evaporator.thermalElementB[7].outlet.state.phase,evaporator.thermalElementB[6].state.phase,evaporator.thermalElementB[6].outlet.state.phase,evaporator.thermalElementB[5].state.phase,evaporator.thermalElementB[5].outlet.state.phase,evaporator.thermalElementB[4].state.phase,evaporator.thermalElementB[4].outlet.state.phase,evaporator.thermalElementB[3].state.phase,evaporator.thermalElementB[3].outlet.state.phase,evaporator.thermalElementB[2].state.phase,evaporator.thermalElementB[2].outlet.state.phase,evaporator.thermalElementB[1].state.phase,evaporator.thermalElementB[1].outlet.state.phase,condenser.thermalElementB[10].state.phase,condenser.thermalElementB[9].state.phase,condenser.thermalElementB[9].outlet.state.phase,condenser.thermalElementB[8].state.phase,condenser.thermalElementB[8].outlet.state.phase,condenser.thermalElementB[7].state.phase,condenser.thermalElementB[7].outlet.state.phase,condenser.thermalElementB[6].state.phase,condenser.thermalElementB[6].outlet.state.phase,condenser.thermalElementB[5].state.phase,condenser.thermalElementB[5].outlet.state.phase,condenser.thermalElementB[4].state.phase,condenser.thermalElementB[4].outlet.state.phase,condenser.thermalElementB[3].state.phase,condenser.thermalElementB[3].outlet.state.phase,condenser.thermalElementB[2].state.phase,condenser.thermalElementB[2].outlet.state.phase,condenser.thermalElementB[1].state.phase,condenser.thermalElementB[1].outlet.state.phase,receiver.medium.phase)
 * Number of discrete states: 0 ()
 * Number of clocked states: 0 ()
 * Top-level inputs: 0
Notification: Strong component statistics for initialization (844):
 * Single equations (assignments): 776
 * Array equations: 0
 * Algorithm blocks: 0
 * Record equations: 44
 * When equations: 0
 * If-equations: 0
 * Equation systems (not torn): 0
 * Torn equation systems: 24
 * Mixed (continuous/discrete) equation systems: 0
Notification: Torn system details for strict tearing set:
 * Linear torn systems (#iteration vars, #inner vars, density): 23 systems
   {(1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,23,100.0%), (1,12,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,12,100.0%)}
 * Non-linear torn systems (#iteration vars, #inner vars): 1 system
   {(1,1)}
Notification: Performance of prepare postOptimizeDAE: time 0.00478/1.904, allocations: 1.04 MB / 0.9886 GB, free: 80.53 MB / 0.7293 GB
Notification: Performance of postOpt lateInlineFunction (simulation): time 0.003683/1.908, allocations: 1.153 MB / 0.9897 GB, free: 80.42 MB / 0.7293 GB
Notification: Performance of postOpt wrapFunctionCalls (simulation): time 0.02646/1.934, allocations: 15.3 MB / 1.005 GB, free: 78.78 MB / 0.7293 GB
Notification: Performance of postOpt inlineArrayEqn (simulation): time 0.01156/1.946, allocations: 5.582 MB / 1.01 GB, free: 78.07 MB / 0.7293 GB
Notification: Performance of postOpt constantLinearSystem (simulation): time 0.0001327/1.946, allocations: 19.75 kB / 1.01 GB, free: 78.07 MB / 0.7293 GB
Notification: Performance of postOpt simplifysemiLinear (simulation): time 7.574e-05/1.946, allocations: 46.97 kB / 1.01 GB, free: 78.07 MB / 0.7293 GB
Warning: The model contains alias variables with redundant start and/or conflicting nominal values. It is recommended to resolve the conflicts, because otherwise the system could be hard to solve. To print the conflicting alias sets and the chosen candidates please use -d=aliasConflicts.
Notification: Performance of postOpt removeSimpleEquations (simulation): time 0.03825/1.984, allocations: 15.33 MB / 1.025 GB, free: 76.43 MB / 0.7293 GB
Notification: Performance of postOpt simplifyComplexFunction (simulation): time 2.82e-05/1.984, allocations: 0 / 1.025 GB, free: 76.43 MB / 0.7293 GB
Notification: Performance of postOpt solveSimpleEquations (simulation): time 0.003708/1.988, allocations: 1.666 MB / 1.027 GB, free: 76.43 MB / 0.7293 GB
Notification: Performance of postOpt tearingSystem (simulation): time 0.0029/1.991, allocations: 1.388 MB / 1.028 GB, free: 76.07 MB / 0.7293 GB
Notification: Performance of postOpt inputDerivativesUsed (simulation): time 0.001164/1.992, allocations: 350.5 kB / 1.028 GB, free: 76.07 MB / 0.7293 GB
Notification: Performance of postOpt calculateStrongComponentJacobians (simulation): time 0.0182/2.01, allocations: 46.06 MB / 1.073 GB, free: 34.19 MB / 0.7293 GB
Notification: Performance of postOpt calculateStateSetsJacobians (simulation): time 2.715e-06/2.01, allocations: 4.094 kB / 1.073 GB, free: 34.18 MB / 0.7293 GB
Notification: Performance of postOpt symbolicJacobian (simulation): time 0.02128/2.031, allocations: 9.643 MB / 1.083 GB, free: 28.23 MB / 0.7293 GB
Notification: Performance of postOpt removeConstants (simulation): time 0.007205/2.039, allocations: 1.796 MB / 1.085 GB, free: 26.94 MB / 0.7293 GB
Notification: Performance of postOpt simplifyTimeIndepFuncCalls (simulation): time 0.002717/2.041, allocations: 206.3 kB / 1.085 GB, free: 26.88 MB / 0.7293 GB
Notification: Performance of postOpt simplifyAllExpressions (simulation): time 0.005292/2.047, allocations: 384 kB / 1.085 GB, free: 26.62 MB / 0.7293 GB
Notification: Performance of postOpt findZeroCrossings (simulation): time 0.0018/2.048, allocations: 0.7058 MB / 1.086 GB, free: 26 MB / 0.7293 GB
Notification: Performance of postOpt collapseArrayExpressions (simulation): time 0.001198/2.05, allocations: 408.4 kB / 1.086 GB, free: 25.67 MB / 0.7293 GB
Notification: Performance of sorting global known variables: time 0.004606/2.054, allocations: 2.959 MB / 1.089 GB, free: 23.32 MB / 0.7293 GB
Notification: Performance of sort global known variables: time 3.51e-07/2.054, allocations: 4 kB / 1.089 GB, free: 23.31 MB / 0.7293 GB
Notification: Performance of remove unused functions: time 0.02414/2.078, allocations: 5.344 MB / 1.094 GB, free: 18.52 MB / 0.7293 GB
Notification: Model statistics after passing the back-end for simulation:
 * Number of independent subsystems: 6
 * Number of states: 53 (condenser.thermalElementB[1].h,condenser.thermalElementB[2].h,condenser.thermalElementB[3].h,condenser.thermalElementB[4].h,condenser.thermalElementB[5].h,condenser.thermalElementB[6].h,condenser.thermalElementB[7].h,condenser.thermalElementB[8].h,condenser.thermalElementB[9].h,condenser.thermalElementB[10].h,condenser.thermalElementA[1].inlet.m_flow,condenser.thermalElementA[1].h,condenser.thermalElementA[2].h,condenser.thermalElementA[3].h,condenser.thermalElementA[4].h,condenser.thermalElementA[5].h,condenser.thermalElementA[6].h,condenser.thermalElementA[7].h,condenser.thermalElementA[8].h,condenser.thermalElementA[9].h,condenser.thermalElementA[10].h,evaporator.thermalElementB[1].h,evaporator.thermalElementB[2].h,evaporator.thermalElementB[3].h,evaporator.thermalElementB[4].h,evaporator.thermalElementB[5].h,evaporator.thermalElementB[6].h,evaporator.thermalElementB[7].h,evaporator.thermalElementB[8].h,evaporator.thermalElementB[9].h,evaporator.thermalElementB[10].h,evaporator.thermalElementA[1].inlet.m_flow,evaporator.thermalElementA[1].h,evaporator.thermalElementA[2].h,evaporator.thermalElementA[3].h,evaporator.thermalElementA[4].h,evaporator.thermalElementA[5].h,evaporator.thermalElementA[6].h,evaporator.thermalElementA[7].h,evaporator.thermalElementA[8].h,evaporator.thermalElementA[9].h,evaporator.thermalElementA[10].h,receiver.M,receiver.U_med,PI.x,PI1.x,multiSensor_Tp1.p,multiSensor_Tp1.T,compressor.m_flow,PI_Valve.x,firstOrderValve.y,PI_CompressorTemperature.I.y,PI_CompressorPressure.I.y)
 * Number of discrete variables: 68 (condenser.thermalElementB[1].state.phase,condenser.thermalElementB[1].outlet.state.phase,condenser.thermalElementB[2].outlet.state.phase,condenser.thermalElementB[2].state.phase,condenser.thermalElementB[5].outlet.state.phase,condenser.thermalElementB[5].state.phase,condenser.thermalElementB[6].outlet.state.phase,condenser.thermalElementB[6].state.phase,condenser.thermalElementB[7].outlet.state.phase,condenser.thermalElementB[7].state.phase,condenser.thermalElementB[8].outlet.state.phase,condenser.thermalElementB[8].state.phase,condenser.thermalElementB[9].outlet.state.phase,condenser.thermalElementB[9].state.phase,singleSensorSelect2.inlet.state.phase,condenser.thermalElementB[10].state.phase,condenser.thermalElementB[4].outlet.state.phase,condenser.thermalElementB[4].state.phase,condenser.thermalElementB[3].outlet.state.phase,condenser.thermalElementB[3].state.phase,evaporator.thermalElementB[1].state.phase,evaporator.thermalElementB[1].outlet.state.phase,evaporator.thermalElementB[4].outlet.state.phase,evaporator.thermalElementB[4].state.phase,evaporator.thermalElementB[5].outlet.state.phase,evaporator.thermalElementB[5].state.phase,evaporator.thermalElementB[6].outlet.state.phase,evaporator.thermalElementB[6].state.phase,evaporator.thermalElementB[7].outlet.state.phase,evaporator.thermalElementB[7].state.phase,evaporator.thermalElementB[9].outlet.state.phase,evaporator.thermalElementB[9].state.phase,singleSensorSelect1.inlet.state.phase,singleSensorSelect5.inlet.state.phase,evaporator.thermalElementB[10].state.phase,evaporator.thermalElementB[8].outlet.state.phase,evaporator.thermalElementB[8].state.phase,evaporator.thermalElementB[3].outlet.state.phase,evaporator.thermalElementB[3].state.phase,evaporator.thermalElementB[2].outlet.state.phase,evaporator.thermalElementB[2].state.phase,singleSensorSelect4.inlet.state.phase,singleSensorSelect3.inlet.state.phase,$cse5.phase,$cse6.phase,$cse7.phase,$cse8.phase,$cse9.phase,$cse10.phase,$cse11.phase,$cse12.phase,$cse13.phase,$cse14.phase,$cse15.phase,$cse16.phase,$cse17.phase,$cse18.phase,$cse19.phase,$cse20.phase,$cse21.phase,$cse22.phase,$cse23.phase,$cse24.phase,$cse25.phase,$cse26,$cse29.phase,$cse31.phase,$cse32.phase)
 * Number of discrete states: 0 ()
 * Number of clocked states: 0 ()
 * Top-level inputs: 0
Notification: Strong component statistics for simulation (829):
 * Single equations (assignments): 759
 * Array equations: 0
 * Algorithm blocks: 0
 * Record equations: 45
 * When equations: 0
 * If-equations: 0
 * Equation systems (not torn): 0
 * Torn equation systems: 25
 * Mixed (continuous/discrete) equation systems: 0
Notification: Torn system details for strict tearing set:
 * Linear torn systems (#iteration vars, #inner vars, density): 24 systems
   {(1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,3,100.0%), (1,23,100.0%), (1,1,100.0%), (1,12,100.0%), (1,12,100.0%)}
 * Non-linear torn systems (#iteration vars, #inner vars): 1 system
   {(1,3)}
Notification: Performance of Backend phase and start with SimCode phase: time 0.01432/2.093, allocations: 4.332 MB / 1.099 GB, free: 14.6 MB / 0.7293 GB
Notification: Performance of simCode: created initialization part: time 0.03363/2.126, allocations: 22.83 MB / 1.121 GB, free: 7.527 MB / 0.7449 GB
Notification: Performance of simCode: created event and clocks part: time 1.816e-05/2.126, allocations: 5.812 kB / 1.121 GB, free: 7.523 MB / 0.7449 GB
Notification: Performance of simCode: created simulation system equations: time 0.01394/2.14, allocations: 7.755 MB / 1.128 GB, free: 92 kB / 0.7449 GB
Notification: Performance of simCode: created of all other equations (e.g. parameter, nominal, assert, etc): time 0.02473/2.165, allocations: 5.502 MB / 1.134 GB, free: 11.02 MB / 0.7605 GB
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10151:11-10151:222:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality3.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10151:11-10151:222:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality2.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10151:11-10151:222:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality1.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10151:11-10151:222:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10151:11-10151:222:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getFlowUnit(singleFlowSensor.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10151:11-10151:222:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorCondenserSubcooling.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10151:11-10151:222:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorEvaporatorSuperheating.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10151:11-10151:222:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality3.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10151:11-10151:222:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality2.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10151:11-10151:222:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality1.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10151:11-10151:222:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10151:11-10151:222:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getFlowUnit(singleFlowSensor.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10151:11-10151:222:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorCondenserSubcooling.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10151:11-10151:222:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorEvaporatorSuperheating.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10151:11-10151:222:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality3.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10151:11-10151:222:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality2.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10151:11-10151:222:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality1.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10151:11-10151:222:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getTwoPhaseUnit(sensorVaporQuality.quantity)
[/var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:10151:11-10151:222:writable] Error: Internal error Unexpected expression (should have been handled earlier, probably in the front-end. Unit/displayUnit expression is not a string literal: ThermofluidStream.Sensors.Internal.getFlowUnit(singleFlowSensor.quantity)
Notification: Performance of simCode: created linear, non-linear and system jacobian parts: time 0.04974/2.215, allocations: 21.5 MB / 1.155 GB, free: 5.598 MB / 0.7762 GB
Notification: Performance of simCode: some other stuff during SimCode phase: time 0.007476/2.222, allocations: 2.841 MB / 1.158 GB, free: 2.73 MB / 0.7762 GB
Notification: Performance of simCode: alias equations: time 0.02367/2.246, allocations: 8.865 MB / 1.166 GB, free: 9.996 MB / 0.7918 GB
Notification: Performance of simCode: all other stuff during SimCode phase: time 0.01835/2.264, allocations: 4.297 MB / 1.17 GB, free: 5.703 MB / 0.7918 GB
Notification: Performance of SimCode: time 3.176e-06/2.264, allocations: 4 kB / 1.17 GB, free: 5.699 MB / 0.7918 GB
Notification: Performance of Templates: time 0.6628/2.927, allocations: 279.9 MB / 1.444 GB, free: 5.402 MB / 0.8074 GB
"
[Timeout remaining time 657]
make -j1 -f ThermofluidStream_ThermofluidStream.Examples.VaporCycle.makefile [Timeout 660]
(rm -f ThermofluidStream_ThermofluidStream.Examples.VaporCycle.pipe ; mkfifo ThermofluidStream_ThermofluidStream.Examples.VaporCycle.pipe ; head -c 1048576 < ThermofluidStream_ThermofluidStream.Examples.VaporCycle.pipe >> ../files/ThermofluidStream_ThermofluidStream.Examples.VaporCycle.sim & ./ThermofluidStream_ThermofluidStream.Examples.VaporCycle -abortSlowSimulation -alarm=240  -emit_protected -lv LOG_STATS > ThermofluidStream_ThermofluidStream.Examples.VaporCycle.pipe 2>&1) [Timeout 240]
diffSimulationResults("ThermofluidStream_ThermofluidStream.Examples.VaporCycle_res.mat","/mnt/ReferenceFiles/ThermofluidStream-main-regression/ReferenceData/ThermofluidStream.Examples.VaporCycle_ref.mat","",relTol=0.003,relTolDiffMinMax=0.003,rangeDelta=0.001) [Timeout 660]
""
[Timeout remaining time 660]
Reference file matches
[Calling sys.exit(0), Time elapsed: 21.77548758080229]