Environment - simulationEnvironment:
startTime=3.024e+06
stopTime=3.456e+06
tolerance=1e-06
numberOfIntervals=3474
stepSize=124.352
Regular simulation: ./Buildings_latest_Buildings.DHC.Plants.Combined.Examples.AllElectricCWStorage -abortSlowSimulation -alarm=240  -emit_protected -lv LOG_STATS
LOG_STDOUT        | info    | ... loading "tab1" from "/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Resources/Data/DHC/Loads/Examples/MediumOffice-90.1-2010-5A.mos"
LOG_STDOUT        | info    | ... loading "tab1" from "/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Resources/Data/DHC/Loads/Examples/MediumOffice-90.1-2010-5A.mos"
LOG_STDOUT        | info    | ... loading "tab1" from "/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Resources/Data/DHC/Loads/Examples/MediumOffice-90.1-2010-5A.mos"
LOG_STDOUT        | info    | ... loading "tab1" from "/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Resources/Data/DHC/Loads/Examples/MediumOffice-90.1-2010-5A.mos"
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_STDOUT        | warning | Non-Linear Solver try to handle a problem with a called assert.
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_STDOUT        | warning | Non-Linear Solver try to handle a problem with a called assert.
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_STDOUT        | warning | Non-Linear Solver try to handle a problem with a called assert.
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_STDOUT        | warning | Non-Linear Solver try to handle a problem with a called assert.
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_STDOUT        | warning | Non-Linear Solver try to handle a problem with a called assert.
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_STDOUT        | warning | Non-Linear Solver try to handle a problem with a called assert.
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_STDOUT        | warning | Non-Linear Solver try to handle a problem with a called assert.
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_STDOUT        | warning | Non-Linear Solver try to handle a problem with a called assert.
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_STDOUT        | warning | Non-Linear Solver try to handle a problem with a called assert.
LOG_ASSERT        | debug   | Division by zero roughness / diameter in function context
LOG_STDOUT        | warning | Non-Linear Solver try to handle a problem with a called assert.
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:101:3-101:89:writable]
|                 | |       | The following assertion has been violated at time 3024000.000000
|                 | |       | ((pla.pumChiWat.pum.etaHyd >= 0.0)) --> "Variable violating min constraint: 0.0 <= pla.pumChiWat.pum.etaHyd, has value: -1.048e-32"
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:101:3-101:89:writable]
|                 | |       | The following assertion has been violated at time 3024000.000000
|                 | |       | ((pla.pumHeaWat.pum.etaHyd >= 0.0)) --> "Variable violating min constraint: 0.0 <= pla.pumHeaWat.pum.etaHyd, has value: -7.55987e-34"
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:101:3-101:89:writable]
|                 | |       | The following assertion has been violated at time 3024000.000000
|                 | |       | ((pla.pumConWatCon.pum.etaHyd >= 0.0)) --> "Variable violating min constraint: 0.0 <= pla.pumConWatCon.pum.etaHyd, has value: -9.3058e-37"
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:101:3-101:89:writable]
|                 | |       | The following assertion has been violated at time 3024000.000000
|                 | |       | ((pla.pumConWatEva.pum.etaHyd >= 0.0)) --> "Variable violating min constraint: 0.0 <= pla.pumConWatEva.pum.etaHyd, has value: -2.55553e-32"
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.1.0+maint.om/Fluid/Interfaces.mo:13:5-14:68:writable]
|                 | |       | The following assertion has been violated at time 3024000.000000
|                 | |       | ((disHea.ports_aCon[1].m_flow >= 0.0 and disHea.ports_aCon[1].m_flow <= 1e5)) --> "Variable violating min/max constraint: 0.0 <= disHea.ports_aCon[1].m_flow <= 1e5, has value: -1.86564e-16"
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.1.0+maint.om/Fluid/Interfaces.mo:13:5-14:68:writable]
|                 | |       | The following assertion has been violated at time 3024000.000000
|                 | |       | ((disHea.ports_aCon[2].m_flow >= 0.0 and disHea.ports_aCon[2].m_flow <= 1e5)) --> "Variable violating min/max constraint: 0.0 <= disHea.ports_aCon[2].m_flow <= 1e5, has value: -1.61433e-17"
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/DHC/Networks/BaseClasses/PartialDistribution2Pipe.mo:81:3-85:55:writable]
|                 | |       | The following assertion has been violated at time 3024000.000000
|                 | |       | ((disHea.mCon_flow[1] >= 0.0 and disHea.mCon_flow[1] <= 1e5)) --> "Variable violating min/max constraint: 0.0 <= disHea.mCon_flow[1] <= 1e5, has value: -1.86564e-16"
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/DHC/Networks/BaseClasses/PartialDistribution2Pipe.mo:81:3-85:55:writable]
|                 | |       | The following assertion has been violated at time 3024000.000000
|                 | |       | ((disHea.mCon_flow[2] >= 0.0 and disHea.mCon_flow[2] <= 1e5)) --> "Variable violating min/max constraint: 0.0 <= disHea.mCon_flow[2] <= 1e5, has value: -1.61433e-17"
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Interfaces/PartialTwoPortInterface.mo:20:3-21:81:writable]
|                 | |       | The following assertion has been violated at time 3024000.000000
|                 | |       | ((disHea.con[1].pipDisSup.m_flow >= 0.0 and disHea.con[1].pipDisSup.m_flow <= 1e5)) --> "Variable violating min/max constraint: 0.0 <= disHea.con[1].pipDisSup.m_flow <= 1e5, has value: -2.02707e-16"
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Interfaces/PartialTwoPortInterface.mo:20:3-21:81:writable]
|                 | |       | The following assertion has been violated at time 3024000.000000
|                 | |       | ((disHea.con[1].pipDisRet.m_flow >= 0.0 and disHea.con[1].pipDisRet.m_flow <= 1e5)) --> "Variable violating min/max constraint: 0.0 <= disHea.con[1].pipDisRet.m_flow <= 1e5, has value: -2.02707e-16"
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.1.0+maint.om/Fluid/Interfaces.mo:13:5-14:68:writable]
|                 | |       | The following assertion has been violated at time 3024000.000000
|                 | |       | ((disCoo.ports_aCon[1].m_flow >= 0.0 and disCoo.ports_aCon[1].m_flow <= 1e5)) --> "Variable violating min/max constraint: 0.0 <= disCoo.ports_aCon[1].m_flow <= 1e5, has value: -2.05142e-15"
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/DHC/Networks/BaseClasses/PartialDistribution2Pipe.mo:81:3-85:55:writable]
|                 | |       | The following assertion has been violated at time 3024000.000000
|                 | |       | ((disCoo.mCon_flow[1] >= 0.0 and disCoo.mCon_flow[1] <= 1e5)) --> "Variable violating min/max constraint: 0.0 <= disCoo.mCon_flow[1] <= 1e5, has value: -2.05142e-15"
LOG_SUCCESS       | info    | The initialization finished successfully with 3 homotopy steps.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:101:3-101:89:writable]
|                 | |       | The following assertion has been violated at time 3024030.000302
|                 | |       | ((pla.heaPum.pum.etaHyd >= 0.0)) --> "Variable violating min constraint: 0.0 <= pla.heaPum.pum.etaHyd, has value: -5.85325e-32"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.1.0+maint.om/Fluid/Interfaces.mo:13:5-14:68:writable]
|                 | |       | The following assertion has been violated at time 3024060.000302
|                 | |       | ((disCoo.ports_aCon[2].m_flow >= 0.0 and disCoo.ports_aCon[2].m_flow <= 1e5)) --> "Variable violating min/max constraint: 0.0 <= disCoo.ports_aCon[2].m_flow <= 1e5, has value: -5.96462e-29"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/DHC/Networks/BaseClasses/PartialDistribution2Pipe.mo:81:3-85:55:writable]
|                 | |       | The following assertion has been violated at time 3024060.000302
|                 | |       | ((disCoo.mCon_flow[2] >= 0.0 and disCoo.mCon_flow[2] <= 1e5)) --> "Variable violating min/max constraint: 0.0 <= disCoo.mCon_flow[2] <= 1e5, has value: -5.96462e-29"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Interfaces/PartialTwoPortInterface.mo:20:3-21:81:writable]
|                 | |       | The following assertion has been violated at time 3024060.000302
|                 | |       | ((disCoo.con[1].pipDisSup.m_flow >= 0.0 and disCoo.con[1].pipDisSup.m_flow <= 1e5)) --> "Variable violating min/max constraint: 0.0 <= disCoo.con[1].pipDisSup.m_flow <= 1e5, has value: -1.19292e-28"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Interfaces/PartialTwoPortInterface.mo:20:3-21:81:writable]
|                 | |       | The following assertion has been violated at time 3024060.000302
|                 | |       | ((disCoo.con[1].pipDisRet.m_flow >= 0.0 and disCoo.con[1].pipDisRet.m_flow <= 1e5)) --> "Variable violating min/max constraint: 0.0 <= disCoo.con[1].pipDisRet.m_flow <= 1e5, has value: -1.19292e-28"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/HeatExchangers/WetCoilEffectivenessNTU.mo:78:3-83:35:writable]
|                 | |       | The following assertion has been violated at time 3024439.789088
|                 | |       | ((loaCoo[1].bui.terUniCoo.hexWetNtu.SHR >= 0.0 and loaCoo[1].bui.terUniCoo.hexWetNtu.SHR <= 1.0)) --> "Variable violating min/max constraint: 0.0 <= loaCoo[1].bui.terUniCoo.hexWetNtu.SHR <= 1.0, has value: -2.04359e-53"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:101:3-101:89:writable]
|                 | |       | The following assertion has been violated at time 3024915.646597
|                 | |       | ((loaHea[1].bui.disFloHea.pumFlo.etaHyd >= 0.0)) --> "Variable violating min constraint: 0.0 <= loaHea[1].bui.disFloHea.pumFlo.etaHyd, has value: -0.0426998"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:311:3-315:28:writable]
|                 | |       | The following assertion has been violated at time 3024915.646597
|                 | |       | ((loaHea[1].bui.disFloHea.pumFlo.eff.yMot >= 0.0)) --> "Variable violating min constraint: 0.0 <= loaHea[1].bui.disFloHea.pumFlo.eff.yMot, has value: -0.0384693"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:101:3-101:89:writable]
|                 | |       | The following assertion has been violated at time 3024915.646597
|                 | |       | ((loaHea[2].bui.disFloHea.pumFlo.etaHyd >= 0.0)) --> "Variable violating min constraint: 0.0 <= loaHea[2].bui.disFloHea.pumFlo.etaHyd, has value: -0.0426989"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:311:3-315:28:writable]
|                 | |       | The following assertion has been violated at time 3024915.646597
|                 | |       | ((loaHea[2].bui.disFloHea.pumFlo.eff.yMot >= 0.0)) --> "Variable violating min constraint: 0.0 <= loaHea[2].bui.disFloHea.pumFlo.eff.yMot, has value: -0.0384641"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:311:3-315:28:writable]
|                 | |       | The following assertion has been violated at time 3024930.000605
|                 | |       | ((pla.pumConWatCoo.pum.eff.yMot >= 0.0)) --> "Variable violating min constraint: 0.0 <= pla.pumConWatCoo.pum.eff.yMot, has value: -6.10508e-63"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Interfaces/PartialTwoPortInterface.mo:20:3-21:81:writable]
|                 | |       | The following assertion has been violated at time 3025210.843520
|                 | |       | ((loaCoo[2].bui.disFloCoo.m_flow >= 0.0 and loaCoo[2].bui.disFloCoo.m_flow <= 1e5)) --> "Variable violating min/max constraint: 0.0 <= loaCoo[2].bui.disFloCoo.m_flow <= 1e5, has value: -5.26371e-15"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:101:3-101:89:writable]
|                 | |       | The following assertion has been violated at time 3025210.843520
|                 | |       | ((loaCoo[2].bui.disFloCoo.pumFlo.etaHyd >= 0.0)) --> "Variable violating min constraint: 0.0 <= loaCoo[2].bui.disFloCoo.pumFlo.etaHyd, has value: -7.11145e-16"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.1.0+maint.om/Fluid/Interfaces.mo:13:5-14:68:writable]
|                 | |       | The following assertion has been violated at time 3025210.843520
|                 | |       | ((loaCoo[2].bui.terUniCoo.port_bChiWat.m_flow >= -1e5 and loaCoo[2].bui.terUniCoo.port_bChiWat.m_flow <= 0.0)) --> "Variable violating min/max constraint: -1e5 <= loaCoo[2].bui.terUniCoo.port_bChiWat.m_flow <= 0.0, has value: 5.26371e-15"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Interfaces/PartialFourPortInterface.mo:23:3-24:84:writable]
|                 | |       | The following assertion has been violated at time 3025210.843520
|                 | |       | ((loaCoo[2].bui.terUniCoo.hexWetNtu.m1_flow >= 0.0 and loaCoo[2].bui.terUniCoo.hexWetNtu.m1_flow <= 1e5)) --> "Variable violating min/max constraint: 0.0 <= loaCoo[2].bui.terUniCoo.hexWetNtu.m1_flow <= 1e5, has value: -1.76464e-16"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Interfaces/PartialFourPortInterface.mo:28:3-29:84:writable]
|                 | |       | The following assertion has been violated at time 3025210.843520
|                 | |       | ((loaCoo[2].bui.terUniCoo.hexWetNtu.m2_flow >= 0.0 and loaCoo[2].bui.terUniCoo.hexWetNtu.m2_flow <= 1e5)) --> "Variable violating min/max constraint: 0.0 <= loaCoo[2].bui.terUniCoo.hexWetNtu.m2_flow <= 1e5, has value: -4.04833e-16"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/HeatExchangers/WetCoilEffectivenessNTU.mo:78:3-83:35:writable]
|                 | |       | The following assertion has been violated at time 3025210.843520
|                 | |       | ((loaCoo[2].bui.terUniCoo.hexWetNtu.SHR >= 0.0 and loaCoo[2].bui.terUniCoo.hexWetNtu.SHR <= 1.0)) --> "Variable violating min/max constraint: 0.0 <= loaCoo[2].bui.terUniCoo.hexWetNtu.SHR <= 1.0, has value: -3.26987e-52"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Actuators/BaseClasses/ActuatorSignal.mo:23:3-30:26:writable]
|                 | |       | The following assertion has been violated at time 3025989.637306
|                 | |       | ((pla.valConWatEvaMix.res3.y >= 0.0 and pla.valConWatEvaMix.res3.y <= 1.0)) --> "Variable violating min/max constraint: 0.0 <= pla.valConWatEvaMix.res3.y <= 1.0, has value: 1"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.1.0+maint.om/Blocks/Interfaces.mo:329:5-330:56:writable]
|                 | |       | The following assertion has been violated at time 3025989.637306
|                 | |       | ((pla.valConWatEvaMix.actPos.y >= 0.0 and pla.valConWatEvaMix.actPos.y <= 1.0)) --> "Variable violating min/max constraint: 0.0 <= pla.valConWatEvaMix.actPos.y <= 1.0, has value: -7.07044e-11"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:311:3-315:28:writable]
|                 | |       | The following assertion has been violated at time 3027706.399428
|                 | |       | ((pla.pumChiWat.pum.eff.yMot >= 0.0)) --> "Variable violating min constraint: 0.0 <= pla.pumChiWat.pum.eff.yMot, has value: -2.53176e-88"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:311:3-315:28:writable]
|                 | |       | The following assertion has been violated at time 3028777.973410
|                 | |       | ((pla.pumConWatCon.pum.eff.yMot >= 0.0)) --> "Variable violating min constraint: 0.0 <= pla.pumConWatCon.pum.eff.yMot, has value: -2.53597e-46"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:311:3-315:28:writable]
|                 | |       | The following assertion has been violated at time 3028777.973410
|                 | |       | ((pla.heaPum.pum.eff.yMot >= 0.0)) --> "Variable violating min constraint: 0.0 <= pla.heaPum.pum.eff.yMot, has value: -2.53597e-46"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Actuators/BaseClasses/ActuatorSignal.mo:23:3-30:26:writable]
|                 | |       | The following assertion has been violated at time 3029098.445596
|                 | |       | ((pla.valBypTan.res3.y >= 0.0 and pla.valBypTan.res3.y <= 1.0)) --> "Variable violating min/max constraint: 0.0 <= pla.valBypTan.res3.y <= 1.0, has value: -2.22045e-16"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.1.0+maint.om/Blocks/Interfaces.mo:329:5-330:56:writable]
|                 | |       | The following assertion has been violated at time 3029098.445596
|                 | |       | ((pla.valBypTan.actPos.y >= 0.0 and pla.valBypTan.actPos.y <= 1.0)) --> "Variable violating min/max constraint: 0.0 <= pla.valBypTan.actPos.y <= 1.0, has value: 1"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Interfaces/PartialTwoPortInterface.mo:20:3-21:81:writable]
|                 | |       | The following assertion has been violated at time 3034072.538860
|                 | |       | ((loaCoo[1].bui.disFloCoo.m_flow >= 0.0 and loaCoo[1].bui.disFloCoo.m_flow <= 1e5)) --> "Variable violating min/max constraint: 0.0 <= loaCoo[1].bui.disFloCoo.m_flow <= 1e5, has value: -3.76492e-28"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:101:3-101:89:writable]
|                 | |       | The following assertion has been violated at time 3034072.538860
|                 | |       | ((loaCoo[1].bui.disFloCoo.pumFlo.etaHyd >= 0.0)) --> "Variable violating min constraint: 0.0 <= loaCoo[1].bui.disFloCoo.pumFlo.etaHyd, has value: -4.26991e-29"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.1.0+maint.om/Fluid/Interfaces.mo:13:5-14:68:writable]
|                 | |       | The following assertion has been violated at time 3034072.538860
|                 | |       | ((loaCoo[1].bui.terUniCoo.port_bChiWat.m_flow >= -1e5 and loaCoo[1].bui.terUniCoo.port_bChiWat.m_flow <= 0.0)) --> "Variable violating min/max constraint: -1e5 <= loaCoo[1].bui.terUniCoo.port_bChiWat.m_flow <= 0.0, has value: 3.76492e-28"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Interfaces/PartialFourPortInterface.mo:23:3-24:84:writable]
|                 | |       | The following assertion has been violated at time 3034072.538860
|                 | |       | ((loaCoo[1].bui.terUniCoo.hexWetNtu.m1_flow >= 0.0 and loaCoo[1].bui.terUniCoo.hexWetNtu.m1_flow <= 1e5)) --> "Variable violating min/max constraint: 0.0 <= loaCoo[1].bui.terUniCoo.hexWetNtu.m1_flow <= 1e5, has value: -1.26218e-29"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/HeatExchangers/CoolingTowers/BaseClasses/Merkel.mo:68:3-69:53:writable]
|                 | |       | The following assertion has been violated at time 3062020.672906
|                 | |       | ((pla.coo.coo.per.FRWat >= 0.0 and pla.coo.coo.per.FRWat <= 1.0)) --> "Variable violating min/max constraint: 0.0 <= pla.coo.coo.per.FRWat <= 1.0, has value: -3.13891e-14"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:101:3-101:89:writable]
|                 | |       | The following assertion has been violated at time 3062020.672906
|                 | |       | ((pla.pumConWatCoo.pum.etaHyd >= 0.0)) --> "Variable violating min constraint: 0.0 <= pla.pumConWatCoo.pum.etaHyd, has value: -2.56295e-27"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135792.746114
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 270108 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135799.299154
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 404482 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135799.299154
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 358169 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135799.299154
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 404482 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135799.299154
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 358169 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135799.299154
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 358169 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135799.299154
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 404482 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135799.299154
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 358169 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135799.299154
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 404482 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135799.299154
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 358169 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135799.299154
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 404482 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135799.299154
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 358169 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135799.299154
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 404482 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135799.299154
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 358169 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135799.299154
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 404482 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135799.599154
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 405014 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135799.599154
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 358700 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135799.599154
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 405014 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135799.599154
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 358700 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135799.599154
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 358700 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135799.599154
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 405014 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135799.599154
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 358700 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135799.599154
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 405014 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135812.762637
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 669852 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135812.762637
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 623539 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135812.762637
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 669852 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135812.762637
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 623539 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135812.762637
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 623539 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135812.762637
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 669852 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135812.762637
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 623539 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135812.762637
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 669852 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135812.762637
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 623539 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135812.762637
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 669852 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:311:3-315:28:writable]
|                 | |       | The following assertion has been violated at time 3135812.762637
|                 | |       | ((loaCoo[1].bui.disFloCoo.pumFlo.eff.yMot >= 0.0)) --> "Variable violating min constraint: 0.0 <= loaCoo[1].bui.disFloCoo.pumFlo.eff.yMot, has value: -0.242138"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:311:3-315:28:writable]
|                 | |       | The following assertion has been violated at time 3135812.762637
|                 | |       | ((loaCoo[2].bui.disFloCoo.pumFlo.eff.yMot >= 0.0)) --> "Variable violating min constraint: 0.0 <= loaCoo[2].bui.disFloCoo.pumFlo.eff.yMot, has value: -0.242138"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135822.335366
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 927601 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135822.335366
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 881287 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135822.335366
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 927601 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135822.335366
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 881287 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135822.335366
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 881287 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135822.335366
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 927601 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135822.335366
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 881287 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135822.335366
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 927601 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135829.299468
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.06984e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135829.299468
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.02353e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135829.299468
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.06984e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135829.299468
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.02353e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135829.299468
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.02353e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135829.299468
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.06984e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135829.299468
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.02353e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135829.299468
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.06984e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135917.098446
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.2233e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3135917.098446
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.17699e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Media/Water.mo:66:5-67:122:writable]
|                 | |       | The following assertion has been violated at time 3135917.098446
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[2].vol.dynBal.medium.T <= 403.15))) --> "In AllElectricCWStorage.pla.chiHea.junHeaWatConOut[2].vol.dynBal.medium: Temperature T = 450.404 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3136041.450777
|                 | |       | (((-loaHea[2].bui.disFloHea.pumFlo.dp) <= loaHea[2].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo: Model operates with head -dp = 1.44201e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[2].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/FlowControlled_m_flow.mo:87:3-92:58:writable]
|                 | |       | The following assertion has been violated at time 3136041.450777
|                 | |       | (((-loaHea[1].bui.disFloHea.pumFlo.dp) <= loaHea[1].bui.disFloHea.pumFlo.dpMax)) --> "In AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo: Model operates with head -dp = 1.39569e+06 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter AllElectricCWStorage.loaHea[1].bui.disFloHea.pumFlo.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Media/Water.mo:66:5-67:122:writable]
|                 | |       | The following assertion has been violated at time 3136041.450777
|                 | |       | ((noEvent(pla.chiHea.junHeaWatConOut[2].vol.dynBal.medium.T <= 403.15))) --> "In AllElectricCWStorage.pla.chiHea.junHeaWatConOut[2].vol.dynBal.medium: Temperature T = 463.791 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings master/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:311:3-315:28:writable]
|                 | |       | The following assertion has been violated at time 3136041.450777
|                 | |       | ((pla.pumConWatEva.pum.eff.yMot >= 0.0)) --> "Variable violating min constraint: 0.0 <= pla.pumConWatEva.pum.eff.yMot, has value: -3.98597e-179"
LOG_ASSERT        | error   | No event found, but assert was triggered. Throwing now!
LOG_STATS         | info    | ### STATISTICS ###
|                 | |       | | timer
|                 | |       | | |            0s          reading init.xml
|                 | |       | | |            0s          reading info.xml
|                 | |       | | |   3.5016e-05s [  0.0%] pre-initialization
|                 | |       | | |     0.030493s [  0.1%] initialization
|                 | |       | | |            0s [  0.0%] steps
|                 | |       | | |      4.26123s [  8.5%] solver (excl. callbacks)
|                 | |       | | |   0.00915956s [  0.0%] creating output-file
|                 | |       | | |      2.29684s [  4.6%] event-handling
|                 | |       | | |            0s [  0.0%] overhead
|                 | |       | | |      43.6381s [ 86.9%] simulation
|                 | |       | | |      50.2359s [100.0%] total
|                 | |       | | events
|                 | |       | | |   547 state events
|                 | |       | | |     0 time events
|                 | |       | | solver: dassl
|                 | |       | | | 33073 steps taken
|                 | |       | | | 58240 calls of functionODE
|                 | |       | | | 26815 evaluations of jacobian
|                 | |       | | |  1181 error test failures
|                 | |       | | |  6391 convergence test failures
|                 | |       | | | 40.9548s time of jacobian evaluation