Running: ./testmodel.py --libraries=/home/hudson/saved_omc/libraries/.openmodelica/libraries --ompython_omhome=/usr TransiEnt_TransiEnt.Producer.Electrical.Conventional.Components.Check.TestDetailedSteamPowerPlant.conf.json
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 9.1.3-maint.9.1.x/package.mo", uses=false)
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/DymolaCommands master/package.mo", uses=false)
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/package.mo", uses=false)
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-main/package.mo", uses=false)
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaReference 4.0.0+maint.om/package.mo", uses=false)
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica_LinearSystems2 2.4.0/package.mo", uses=false)
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica_StateGraph2 2.1.0/package.mo", uses=false)
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.0.0+maint.om/package.mo", uses=false)
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.0.0+maint.om/package.mo", uses=false)
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.0.0+maint.om/package.mo", uses=false)
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Design master/package.mo", uses=false)
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/DataFiles master/package.mo", uses=false)
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/package.mo", uses=false)
Using package TransiEnt with version 2.0.2 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/package.mo)
Using package DataFiles with version 0.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/DataFiles master/package.mo)
Using package Design with version 0.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Design master/package.mo)
Using package Modelica with version 4.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.0.0+maint.om/package.mo)
Using package Complex with version 4.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.0.0+maint.om/package.mo)
Using package ModelicaServices with version 4.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.0.0+maint.om/package.mo)
Using package Modelica_StateGraph2 with version 2.1.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica_StateGraph2 2.1.0/package.mo)
Using package Modelica_LinearSystems2 with version 2.4.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica_LinearSystems2 2.4.0/package.mo)
Using package ModelicaReference with version 4.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaReference 4.0.0+maint.om/package.mo)
Using package TILMedia with version 1.8.1 ClaRa (/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-main/package.mo)
Using package ClaRa with version 1.8.1 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/package.mo)
Using package DymolaCommands with version 0.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/DymolaCommands master/package.mo)
Using package Buildings with version 9.1.3 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 9.1.3-maint.9.1.x/package.mo)
Running command: translateModel(TransiEnt.Producer.Electrical.Conventional.Components.Check.TestDetailedSteamPowerPlant,tolerance=1e-06,outputFormat="empty",numberOfIntervals=5000,variableFilter="",fileNamePrefix="TransiEnt_TransiEnt.Producer.Electrical.Conventional.Components.Check.TestDetailedSteamPowerPlant")
translateModel(TransiEnt.Producer.Electrical.Conventional.Components.Check.TestDetailedSteamPowerPlant,tolerance=1e-06,outputFormat="empty",numberOfIntervals=5000,variableFilter="",fileNamePrefix="TransiEnt_TransiEnt.Producer.Electrical.Conventional.Components.Check.TestDetailedSteamPowerPlant")
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 9.1.3-maint.9.1.x/package.mo): time 2.176/2.176, allocations: 390.3 MB / 410 MB, free: 12.42 MB / 318.1 MB
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/DymolaCommands master/package.mo): time 0.0005716/0.0005715, allocations: 31.94 kB / 0.4899 GB, free: 4.445 MB / 398.1 MB
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Control/PredictorModels_3508/Check/package.mo:2:1-21:10:writable] Warning: The package.order file contains a class TestReheater, which is expected to be stored in file TestReheater.mo, but seems to be named testReheater.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Control/PredictorModels_3508/Check/testReheater.mo:2:1-117:17:writable] Warning: Expected the package to have name testReheater, but got TestReheater. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/package.mo:2:1-23:10:writable] Warning: PhysicalMills was referenced in the package.order file, but was not found in package.mo, PhysicalMills/package.mo or PhysicalMills.mo.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/package.mo:2:1-22:18:writable] Warning: Expected the package to have name physicalMills, but got PhysicalMills. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/package.mo:2:1-22:18:writable] Warning: The package.order file contains a class Mill_L4_advancedInit, which is expected to be stored in file Mill_L4_advancedInit.mo, but seems to be named mill_L4_advancedInit.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/package.mo:2:1-22:18:writable] Warning: The package.order file contains a class Mill_L4, which is expected to be stored in file Mill_L4.mo, but seems to be named mill_L4.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/mill_L4_advancedInit.mo:2:1-58:25:writable] Warning: Expected the package to have name mill_L4_advancedInit, but got Mill_L4_advancedInit. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/mill_L4_advancedInit.mo:2:1-58:25:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills; but got within ClaRa.Components.Mills.PhysicalMills; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/mill_L4.mo:2:1-315:12:writable] Warning: Expected the package to have name mill_L4, but got Mill_L4. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/mill_L4.mo:2:1-315:12:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills; but got within ClaRa.Components.Mills.PhysicalMills; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Check/package.mo:2:1-21:10:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills; but got within ClaRa.Components.Mills.PhysicalMills; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Check/package.mo:2:1-21:10:writable] Warning: The package.order file contains a class TestMillBox_2, which is expected to be stored in file TestMillBox_2.mo, but seems to be named testMillBox_2.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Check/package.mo:2:1-21:10:writable] Warning: The package.order file contains a class TestMillBox_1_measurementInput, which is expected to be stored in file TestMillBox_1_measurementInput.mo, but seems to be named testMillBox_1_measurementInput.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Check/package.mo:2:1-21:10:writable] Warning: The package.order file contains a class TestMillBox_1, which is expected to be stored in file TestMillBox_1.mo, but seems to be named testMillBox_1.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Check/testMillBox_2.mo:2:1-297:18:writable] Warning: Expected the package to have name testMillBox_2, but got TestMillBox_2. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Check/testMillBox_2.mo:2:1-297:18:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Check; but got within ClaRa.Components.Mills.PhysicalMills.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Check/testMillBox_1_measurementInput.mo:2:1-1342:35:writable] Warning: Expected the package to have name testMillBox_1_measurementInput, but got TestMillBox_1_measurementInput. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Check/testMillBox_1_measurementInput.mo:2:1-1342:35:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Check; but got within ClaRa.Components.Mills.PhysicalMills.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Check/testMillBox_1.mo:2:1-465:18:writable] Warning: Expected the package to have name testMillBox_1, but got TestMillBox_1. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Check/testMillBox_1.mo:2:1-465:18:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Check; but got within ClaRa.Components.Mills.PhysicalMills.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/package.mo:2:1-29:12:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills; but got within ClaRa.Components.Mills.PhysicalMills; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/FlowClassifier.mo:2:1-346:19:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/CentrifugalClassifier.mo:2:1-380:26:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/GrinderRingRoller.mo:2:1-294:22:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/FuelJoin_distributed.mo:2:1-133:25:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Dryer.mo:2:1-301:10:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/package.mo:2:1-20:17:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/package.mo:2:1-20:13:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Transport_Velocity/package.mo:2:1-20:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Transport_Velocity/Transport_complex.mo:2:1-71:22:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Transport_Velocity/Transport_constant.mo:2:1-49:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Transport_Velocity/Transport_base.mo:2:1-52:19:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Selection_Function/package.mo:2:1-20:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Selection_Function/Selection_Kersting.mo:2:1-80:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Selection_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Selection_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Selection_Function/Selection_Steinmetz.mo:2:1-104:24:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Selection_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Selection_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Selection_Function/Selection_constant.mo:2:1-45:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Selection_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Selection_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Selection_Function/Selection_base.mo:2:1-50:19:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Selection_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Selection_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Breakage_Function/package.mo:2:1-20:22:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Breakage_Function/Breakage_Austin.mo:2:1-109:20:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Breakage_Function/Breakage_Steinmetz.mo:2:1-106:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Breakage_Function/Breakage_constant.mo:2:1-45:22:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Breakage_Function/Breakage_base.mo:2:1-51:18:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Drying/package.mo:2:1-20:11:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Drying/Drying_ideal.mo:2:1-58:17:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Drying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Drying; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Drying/Drying_base.mo:2:1-44:16:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Drying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Drying; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Classifying/package.mo:2:1-20:16:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Classifying/Classifying_flow.mo:2:1-111:21:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Classifying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Classifying; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Classifying/Classifying_centrifugal.mo:2:1-153:28:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Classifying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Classifying; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Classifying/Classifying_centrifugal_base.mo:2:1-45:33:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Classifying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Classifying; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Classifying/Classifying_flow_base.mo:2:1-45:26:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Classifying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Classifying; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Records/package.mo:2:1-20:12:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Records/iCom_Dryer.mo:2:1-57:15:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Records/iCom_FlowClassifier.mo:2:1-67:24:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Records/iCom_CentrifugalClassifier.mo:2:1-69:31:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Records/iCom_Grinder.mo:2:1-61:17:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Records/FuelClassification_example_21classes.mo:2:1-43:41:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Records/GeometricProgression.mo:2:1-56:25:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Records/FuelClassification_generic.mo:2:1-43:31:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Records/FuelClassification_example_05classes.mo:2:1-43:41:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Records/FuelClassification_example_11classes.mo:2:1-43:41:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Fundamentals/Records/FuelClassification_base.mo:2:1-61:28:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Check/package.mo:2:1-23:10:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Check/package.mo:2:1-23:10:writable] Warning: The package.order file contains a class TestFuelJoin, which is expected to be stored in file TestFuelJoin.mo, but seems to be named testFuelJoin.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Check/package.mo:2:1-23:10:writable] Warning: The package.order file contains a class TestAerosolVolume, which is expected to be stored in file TestAerosolVolume.mo, but seems to be named testAerosolVolume.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Check/package.mo:2:1-23:10:writable] Warning: The package.order file contains a class TestDryer, which is expected to be stored in file TestDryer.mo, but seems to be named testDryer.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Check/package.mo:2:1-23:10:writable] Warning: The package.order file contains a class TestGrinder, which is expected to be stored in file TestGrinder.mo, but seems to be named testGrinder.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Check/testFuelJoin.mo:2:1-93:17:writable] Warning: Expected the package to have name testFuelJoin, but got TestFuelJoin. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Check/testFuelJoin.mo:2:1-93:17:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Check; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Check/testAerosolVolume.mo:2:1-176:22:writable] Warning: Expected the package to have name testAerosolVolume, but got TestAerosolVolume. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Check/testAerosolVolume.mo:2:1-176:22:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Check; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Check/testDryer.mo:2:1-93:14:writable] Warning: Expected the package to have name testDryer, but got TestDryer. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Check/testDryer.mo:2:1-93:14:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Check; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Check/testGrinder.mo:2:1-154:16:writable] Warning: Expected the package to have name testGrinder, but got TestGrinder. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/Components/Mills/physicalMills/Volumes/Check/testGrinder.mo:2:1-154:16:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Check; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/package.mo): time 0.7176/0.7176, allocations: 127.2 MB / 0.7036 GB, free: 5.387 MB / 0.4981 GB
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-main/package.mo): time 0.09117/0.09117, allocations: 22.38 MB / 0.8404 GB, free: 16.36 MB / 0.5294 GB
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaReference 4.0.0+maint.om/package.mo): time 0.01203/0.01203, allocations: 0.8857 MB / 0.9623 GB, free: 3.312 MB / 0.6388 GB
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica_LinearSystems2 2.4.0/package.mo): time 0.2528/0.2528, allocations: 45.02 MB / 1.128 GB, free: 97.66 MB / 0.6544 GB
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica_StateGraph2 2.1.0/package.mo): time 0.08628/0.08628, allocations: 13.56 MB / 1.271 GB, free: 93.54 MB / 0.6544 GB
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.0.0+maint.om/package.mo): time 0.001145/0.001145, allocations: 108.6 kB / 1.404 GB, free: 7.016 MB / 0.7013 GB
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.0.0+maint.om/package.mo): time 0.001311/0.001311, allocations: 187.7 kB / 1.537 GB, free: 222.8 MB / 0.8263 GB
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.0.0+maint.om/package.mo): time 1.555/1.555, allocations: 222.9 MB / 1.887 GB, free: 91.91 MB / 0.8888 GB
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Design master/package.mo): time 0.0005481/0.0005482, allocations: 35.94 kB / 2.069 GB, free: 15.05 MB / 0.92 GB
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/DataFiles master/package.mo): time 0.0005659/0.000566, allocations: 35.92 kB / 2.25 GB, free: 5.25 MB / 1.092 GB
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/package.mo): time 1.094/1.094, allocations: 220.7 MB / 2.647 GB, free: 132 MB / 1.123 GB
Warning: Requested package TILMedia of version 1.8.0 ClaRa, but this package was already loaded with version 1.8.1 ClaRa. OpenModelica cannot reason about compatibility between the two packages since they are not semantic versions.
Warning: TransiEnt requested package ClaRa of version 1.8.0. ClaRa 1.8.1 is used instead which states that it is only compatible with a conversion script. Use convertPackageToLibrary(TransiEnt, ClaRa, "1.8.1") to run the conversion script or proceed with potential issues as a result.
Notification: TransiEnt requested package Buildings of version 9.0.0. Buildings 9.1.3 is used instead which states that it is fully compatible without conversion script needed.
Notification: Performance of FrontEnd - loaded program: time 0.009352/0.009352, allocations: 315.3 kB / 3.12 GB, free: 9.566 MB / 1.233 GB
Notification: Performance of FrontEnd - Absyn->SCode: time 2.199/2.208, allocations: 229.5 MB / 3.344 GB, free: 5.934 MB / 1.405 GB
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Components/Mechanical/Base/PartialMechanicalConnection.mo:64:3-64:40:writable] Warning: An inner declaration for outer component modelStatistics could not be found and was automatically generated.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Components/Mechanical/Base/PartialMechanicalConnection.mo:64:3-64:40:writable] Notification: The diagnostics message for the missing inner is: Your model is using an outer "modelStatistics" but it does not contain an inner "modelStatistics" component. Drag model TransiEnt.ModelStatistics into your model to make it work.
Notification: Performance of NFInst.instantiate(TransiEnt.Producer.Electrical.Conventional.Components.Check.TestDetailedSteamPowerPlant): time 0.3321/2.541, allocations: 271.8 MB / 3.609 GB, free: 9.535 MB / 1.639 GB
Notification: Performance of NFInst.instExpressions: time 0.2683/2.809, allocations: 108.3 MB / 3.715 GB, free: 12.89 MB / 1.749 GB
Notification: Performance of NFInst.updateImplicitVariability: time 0.09586/2.905, allocations: 1.207 MB / 3.716 GB, free: 11.68 MB / 1.749 GB
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/StaticCycles/Triple.mo:32:3-32:182:writable] Warning: Connector steamSignal is not balanced: The number of potential variables (3) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Components/Statistics/Collectors/LocalCollectors/CollectKineticEnergy.mo:38:3-38:143:writable] Warning: Connector kineticEnergyCollector is not balanced: The number of potential variables (0) is not equal to the number of flow variables (1).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1-ClaRa_1.8.1_Release/StaticCycles/Triple.mo:32:3-32:182:writable] Warning: Connector steamSignal is not balanced: The number of potential variables (3) is not equal to the number of flow variables (0).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Components/Statistics/Collectors/LocalCollectors/CollectKineticEnergy.mo:38:3-38:143:writable] Warning: Connector kineticEnergyCollector is not balanced: The number of potential variables (0) is not equal to the number of flow variables (1).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/ModelStatistics.mo:85:3-85:105:writable] Warning: Connector powerCollector is not balanced: The number of potential variables (0) is not equal to the number of flow variables (1).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/ModelStatistics.mo:86:3-86:112:writable] Warning: Connector primBalPowerCollector is not balanced: The number of potential variables (0) is not equal to the number of flow variables (1).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/ModelStatistics.mo:87:3-87:102:writable] Warning: Connector primBalPowerOfferCollector is not balanced: The number of potential variables (0) is not equal to the number of flow variables (1).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/ModelStatistics.mo:88:3-88:111:writable] Warning: Connector secBalPowerCollector is not balanced: The number of potential variables (0) is not equal to the number of flow variables (1).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/ModelStatistics.mo:89:3-89:101:writable] Warning: Connector secBalPowerOfferCollector is not balanced: The number of potential variables (0) is not equal to the number of flow variables (1).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/ModelStatistics.mo:90:3-90:92:writable] Warning: Connector surroundingGridLoad is not balanced: The number of potential variables (0) is not equal to the number of flow variables (1).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/ModelStatistics.mo:92:3-92:126:writable] Warning: Connector tielinePowerCollector is not balanced: The number of potential variables (0) is not equal to the number of flow variables (1).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/ModelStatistics.mo:93:3-93:130:writable] Warning: Connector tielineSetPowerCollector is not balanced: The number of potential variables (0) is not equal to the number of flow variables (1).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/ModelStatistics.mo:95:3-95:95:writable] Warning: Connector kineticEnergyCollector is not balanced: The number of potential variables (0) is not equal to the number of flow variables (1).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/ModelStatistics.mo:98:3-98:99:writable] Warning: Connector gwpCollector is not balanced: The number of potential variables (0) is not equal to the number of flow variables (1).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/ModelStatistics.mo:100:3-100:107:writable] Warning: Connector gwpCollectorHeat is not balanced: The number of potential variables (0) is not equal to the number of flow variables (1).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/ModelStatistics.mo:103:3-103:82:writable] Warning: Connector heatFlowCollector is not balanced: The number of potential variables (0) is not equal to the number of flow variables (1).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/ModelStatistics.mo:105:3-105:87:writable] Warning: Connector costsCollector is not balanced: The number of potential variables (0) is not equal to the number of flow variables (6).
Notification: Performance of NFTyping.typeComponents: time 0.07407/2.979, allocations: 26.89 MB / 3.742 GB, free: 0.6562 MB / 1.764 GB
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-main/VLEFluidFunctions.mo:177:13-181:19:writable] Warning: Pure function 'TILMedia.Internals.VLEFluidConfigurations.FullyMixtureCompatible.VLEFluidFunctions.density_phxi' contains a call to impure function 'TILMedia.Internals.VLEFluidFunctions.density_phxi'.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-main/VLEFluidFunctions.mo:787:13-791:33:writable] Warning: Pure function 'TILMedia.Internals.VLEFluidConfigurations.FullyMixtureCompatible.VLEFluidFunctions.bubbleSpecificEnthalpy_pxi' contains a call to impure function 'TILMedia.Internals.VLEFluidFunctions.bubbleSpecificEnthalpy_pxi'.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-main/VLEFluidFunctions.mo:782:13-786:30:writable] Warning: Pure function 'TILMedia.Internals.VLEFluidConfigurations.FullyMixtureCompatible.VLEFluidFunctions.dewSpecificEnthalpy_pxi' contains a call to impure function 'TILMedia.Internals.VLEFluidFunctions.dewSpecificEnthalpy_pxi'.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-main/VLEFluidFunctions.mo:777:13-781:24:writable] Warning: Pure function 'TILMedia.Internals.VLEFluidConfigurations.FullyMixtureCompatible.VLEFluidFunctions.bubbleDensity_pxi' contains a call to impure function 'TILMedia.Internals.VLEFluidFunctions.bubbleDensity_pxi'.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-main/VLEFluidFunctions.mo:772:13-776:21:writable] Warning: Pure function 'TILMedia.Internals.VLEFluidConfigurations.FullyMixtureCompatible.VLEFluidFunctions.dewDensity_pxi' contains a call to impure function 'TILMedia.Internals.VLEFluidFunctions.dewDensity_pxi'.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-main/VLEFluidFunctions.mo:524:13-528:28:writable] Warning: Pure function 'TILMedia.Internals.VLEFluidConfigurations.FullyMixtureCompatible.VLEFluidFunctions.specificEnthalpy_pTxi' contains a call to impure function 'TILMedia.Internals.VLEFluidFunctions.specificEnthalpy_pTxi'.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-main/VLEFluidFunctions.mo:353:13-357:28:writable] Warning: Pure function 'TILMedia.Internals.VLEFluidConfigurations.FullyMixtureCompatible.VLEFluidFunctions.specificEnthalpy_psxi' contains a call to impure function 'TILMedia.Internals.VLEFluidFunctions.specificEnthalpy_psxi'.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-main/VLEFluidFunctions.mo:182:13-186:27:writable] Warning: Pure function 'TILMedia.Internals.VLEFluidConfigurations.FullyMixtureCompatible.VLEFluidFunctions.specificEntropy_phxi' contains a call to impure function 'TILMedia.Internals.VLEFluidFunctions.specificEntropy_phxi'.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Basics/Functions/fullPathName.mo:2:1-78:17:writable] Warning: Pure function 'TransiEnt.Basics.Functions.fullPathName' contains a call to impure function 'Modelica.Utilities.Streams.print'.
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfPrimaryEnergyCarrier.BrownCoal as Integer: 1. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfPrimaryEnergyCarrier.BrownCoal) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfPrimaryEnergyCarrier.BlackCoal as Integer: 2. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfPrimaryEnergyCarrier.BlackCoal) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfPrimaryEnergyCarrier.NaturalGas as Integer: 3. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfPrimaryEnergyCarrier.NaturalGas) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfPrimaryEnergyCarrier.WindOnshore as Integer: 4. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfPrimaryEnergyCarrier.WindOnshore) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfPrimaryEnergyCarrier.WindOffshore as Integer: 5. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfPrimaryEnergyCarrier.WindOffshore) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfPrimaryEnergyCarrier.Solar as Integer: 6. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfPrimaryEnergyCarrier.Solar) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfPrimaryEnergyCarrier.Hydro as Integer: 7. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfPrimaryEnergyCarrier.Hydro) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfPrimaryEnergyCarrier.Nuclear as Integer: 8. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfPrimaryEnergyCarrier.Nuclear) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfPrimaryEnergyCarrier.Oil as Integer: 9. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfPrimaryEnergyCarrier.Oil) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfPrimaryEnergyCarrierHeat.NaturalGas as Integer: 3. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfPrimaryEnergyCarrierHeat.NaturalGas) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfPrimaryEnergyCarrierHeat.DistrictHeating as Integer: 4. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfPrimaryEnergyCarrierHeat.DistrictHeating) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfPrimaryEnergyCarrierHeat.Oil as Integer: 5. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfPrimaryEnergyCarrierHeat.Oil) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfPrimaryEnergyCarrierHeat.Electricity as Integer: 6. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfPrimaryEnergyCarrierHeat.Electricity) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfPrimaryEnergyCarrierHeat.Solar as Integer: 7. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfPrimaryEnergyCarrierHeat.Solar) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfPrimaryEnergyCarrierHeat.Biomass as Integer: 8. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfPrimaryEnergyCarrierHeat.Biomass) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfPrimaryEnergyCarrierHeat.Others as Integer: 10. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfPrimaryEnergyCarrierHeat.Others) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfResource.Consumer as Integer: 1. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfResource.Consumer) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfResource.Conventional as Integer: 2. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfResource.Conventional) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfResource.Cogeneration as Integer: 3. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfResource.Cogeneration) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfResource.Renewable as Integer: 4. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfResource.Renewable) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfResource.Consumer as Integer: 1. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfResource.Consumer) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfResource.Generic as Integer: 6. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfResource.Generic) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfResource.Consumer as Integer: 1. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfResource.Consumer) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfResource.Renewable as Integer: 4. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfResource.Renewable) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfResource.Cogeneration as Integer: 3. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfResource.Cogeneration) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfResource.Conventional as Integer: 2. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfResource.Conventional) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfResource.Cogeneration as Integer: 3. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfResource.Cogeneration) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfResource.Conventional as Integer: 2. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfResource.Conventional) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfResource.Storage as Integer: 5. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfResource.Storage) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfResource.Consumer as Integer: 1. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfResource.Consumer) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfResource.Conventional as Integer: 2. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfResource.Conventional) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfResource.Cogeneration as Integer: 3. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfResource.Cogeneration) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfResource.Renewable as Integer: 4. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfResource.Renewable) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfResource.Generic as Integer: 6. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfResource.Generic) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfResource.Consumer as Integer: 1. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfResource.Consumer) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfResource.Conventional as Integer: 2. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfResource.Conventional) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfResource.Cogeneration as Integer: 3. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfResource.Cogeneration) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfResource.Renewable as Integer: 4. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfResource.Renewable) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfResource.Generic as Integer: 6. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfResource.Generic) instead!
Warning: Allowing usage of enumeration expression: TransiEnt.Basics.Types.TypeOfResource.Consumer as Integer: 1. This is non-standard Modelica, use Integer(TransiEnt.Basics.Types.TypeOfResource.Consumer) instead!
Notification: Performance of NFTyping.typeBindings: time 0.1344/3.113, allocations: 39.92 MB / 3.781 GB, free: 8.555 MB / 1.811 GB
Notification: Performance of NFTyping.typeClassSections: time 0.09709/3.21, allocations: 37.14 MB / 3.818 GB, free: 3.469 MB / 1.842 GB
Notification: Performance of NFFlatten.flatten: time 0.2198/3.43, allocations: 134.6 MB / 3.949 GB, free: 12.57 MB / 1.983 GB
Notification: Performance of NFFlatten.resolveConnections: time 0.11/3.54, allocations: 60 MB / 4.008 GB, free: 348 kB / 2.03 GB
Notification: Performance of NFEvalConstants.evaluate: time 0.119/3.659, allocations: 56.63 MB / 4.063 GB, free: 7.527 MB / 2.092 GB
Notification: Performance of NFSimplifyModel.simplify: time 1.515/5.174, allocations: 51.08 MB / 4.113 GB, free: 165.3 MB / 2.092 GB
Notification: Performance of NFPackage.collectConstants: time 0.05801/5.232, allocations: 10.95 MB / 4.124 GB, free: 165.3 MB / 2.092 GB
Notification: Performance of NFFlatten.collectFunctions: time 0.07139/5.304, allocations: 13.67 MB / 4.137 GB, free: 165.3 MB / 2.092 GB
Notification: Performance of NFScalarize.scalarize: time 0.06121/5.365, allocations: 29.98 MB / 4.166 GB, free: 162 MB / 2.092 GB
Notification: Performance of NFVerifyModel.verify: time 0.1167/5.482, allocations: 50.68 MB / 4.216 GB, free: 148.2 MB / 2.092 GB
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Components/Statistics/Collectors/GlobalCollectors/GwpEmissionsStatistics.mo:79:53-79:84:writable] Error: Variable simCenter.expertMode not found in scope GwpEmissionsStatistics.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Components/Statistics/Collectors/GlobalCollectors/GwpEmissionsStatistics.mo:83:53-83:84:writable] Error: Variable simCenter.expertMode not found in scope GwpEmissionsStatistics.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/Components/Statistics/Collectors/GlobalCollectors/EconomicStatistics.mo:42:70-42:85:writable] Error: Variable True not found in scope EconomicStatistics.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.2-master/ModelStatistics.mo:105:71-105:86:writable] Error: Variable True not found in scope ModelStatistics.
Notification: Performance of NFConvertDAE.convert: time 0.2158/5.698, allocations: 160.4 MB / 4.372 GB, free: 86.85 MB / 2.092 GB
Notification: Performance of FrontEnd - DAE generated: time 7.054e-06/5.698, allocations: 2.656 kB / 4.372 GB, free: 86.85 MB / 2.092 GB
Notification: Performance of FrontEnd: time 2.565e-06/5.698, allocations: 0 / 4.372 GB, free: 86.85 MB / 2.092 GB
Notification: Performance of Transformations before backend: time 0.005138/5.703, allocations: 0 / 4.372 GB, free: 86.85 MB / 2.092 GB
Notification: Model statistics after passing the front-end and creating the data structures used by the back-end:
 * Number of equations: 14092
 * Number of variables: 14092
Notification: Performance of Generate backend data structure: time 0.3177/6.021, allocations: 98.75 MB / 4.469 GB, free: 16.06 MB / 2.092 GB
Notification: Performance of prepare preOptimizeDAE: time 5.328e-05/6.021, allocations: 13.92 kB / 4.469 GB, free: 16.05 MB / 2.092 GB
Notification: Performance of preOpt normalInlineFunction (simulation): time 0.0498/6.071, allocations: 11 MB / 4.48 GB, free: 9.977 MB / 2.092 GB
Notification: Performance of preOpt evaluateParameters (simulation): time 0.2513/6.322, allocations: 86.46 MB / 4.564 GB, free: 8.391 MB / 2.17 GB
Notification: Performance of preOpt simplifyIfEquations (simulation): time 0.005203/6.327, allocations: 3.298 MB / 4.567 GB, free: 5.102 MB / 2.17 GB
Notification: Performance of preOpt expandDerOperator (simulation): time 0.02406/6.351, allocations: 4.039 MB / 4.571 GB, free: 1.117 MB / 2.17 GB
Notification: Performance of preOpt clockPartitioning (simulation): time 0.2218/6.573, allocations: 86.15 MB / 4.655 GB, free: 15.23 MB / 2.28 GB
Notification: Performance of preOpt findStateOrder (simulation): time 0.003347/6.576, allocations: 494.1 kB / 4.656 GB, free: 15.03 MB / 2.28 GB
Notification: Performance of preOpt replaceEdgeChange (simulation): time 0.02118/6.598, allocations: 2.09 MB / 4.658 GB, free: 13 MB / 2.28 GB
Notification: Performance of preOpt inlineArrayEqn (simulation): time 0.005345/6.603, allocations: 2.844 MB / 4.661 GB, free: 10.16 MB / 2.28 GB
Notification: Performance of preOpt removeEqualRHS (simulation): time 0.1591/6.762, allocations: 59.27 MB / 4.718 GB, free: 1.484 MB / 2.327 GB
Warning: The model contains alias variables with redundant start and/or conflicting nominal values. It is recommended to resolve the conflicts, because otherwise the system could be hard to solve. To print the conflicting alias sets and the chosen candidates please use -d=aliasConflicts.
Notification: Performance of preOpt removeSimpleEquations (simulation): time 2.197/8.959, allocations: 472 MB / 5.179 GB, free: 0.5996 GB / 2.608 GB
Notification: Performance of preOpt comSubExp (simulation): time 0.113/9.072, allocations: 56.42 MB / 5.235 GB, free: 0.5843 GB / 2.608 GB
Notification: Performance of preOpt resolveLoops (simulation): time 0.06602/9.138, allocations: 32.33 MB / 5.266 GB, free: 0.5708 GB / 2.608 GB
Notification: Performance of preOpt evalFunc (simulation): time 0.01058/9.149, allocations: 2.375 MB / 5.268 GB, free: 0.57 GB / 2.608 GB
Notification: Performance of preOpt encapsulateWhenConditions (simulation): time 0.09156/9.241, allocations: 49.26 MB / 5.317 GB, free: 0.5371 GB / 2.608 GB
Notification: Performance of preOpt simplifyInStream (simulation): time 0.07034/9.311, allocations: 19.59 MB / 5.336 GB, free: 0.5283 GB / 2.608 GB
Notification: Performance of pre-optimization done (n=7057): time 0.000415/9.311, allocations: 0 / 5.336 GB, free: 0.5283 GB / 2.608 GB
Notification: Performance of matching and sorting (n=7065): time 32.93/42.24, allocations: 8.383 GB / 13.72 GB, free: 0.7165 GB / 2.686 GB
Notification: Performance of inlineWhenForInitialization (initialization): time 0.00597/42.25, allocations: 24.51 MB / 13.74 GB, free: 0.6878 GB / 2.686 GB
Notification: Performance of selectInitializationVariablesDAE (initialization): time 0.2395/42.49, allocations: 77.62 MB / 13.82 GB, free: 0.6525 GB / 2.686 GB
Notification: Performance of collectPreVariables (initialization): time 0.01491/42.5, allocations: 0.7682 MB / 13.82 GB, free: 0.6517 GB / 2.686 GB
Notification: Performance of collectInitialEqns (initialization): time 0.05274/42.56, allocations: 32.68 MB / 13.85 GB, free: 0.6228 GB / 2.686 GB
Notification: Performance of collectInitialBindings (initialization): time 0.03923/42.59, allocations: 24.86 MB / 13.88 GB, free: 0.601 GB / 2.686 GB
Notification: Performance of simplifyInitialFunctions (initialization): time 0.0966/42.69, allocations: 18.46 MB / 13.89 GB, free: 0.5852 GB / 2.686 GB
Notification: Performance of setup shared object (initialization): time 7.017e-05/42.69, allocations: 305.1 kB / 13.89 GB, free: 0.5849 GB / 2.686 GB
Notification: Performance of preBalanceInitialSystem (initialization): time 0.08378/42.77, allocations: 35.32 MB / 13.93 GB, free: 0.5548 GB / 2.686 GB
Notification: Performance of partitionIndependentBlocks (initialization): time 0.09286/42.87, allocations: 54.44 MB / 13.98 GB, free: 0.4975 GB / 2.686 GB
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.heatingPower.E[6] = $START.modelStatistics.heatingPower.E[6] (0.0 = $START.modelStatistics.heatingPower.E[6])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.heatingPower.E[4] = $START.modelStatistics.heatingPower.E[4] (0.0 = $START.modelStatistics.heatingPower.E[4])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.heatingPower.E[3] = $START.modelStatistics.heatingPower.E[3] (0.0 = $START.modelStatistics.heatingPower.E[3])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.heatingPower.E[2] = $START.modelStatistics.heatingPower.E[2] (0.0 = $START.modelStatistics.heatingPower.E[2])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.heatingPower.E[1] = $START.modelStatistics.heatingPower.E[1] (0.0 = $START.modelStatistics.heatingPower.E[1])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.heatingPower.E[5] = $START.modelStatistics.heatingPower.E[5] (0.0 = $START.modelStatistics.heatingPower.E[5])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.negPBE[6] = $START.modelStatistics.electricPower.negPBE[6] (0.0 = $START.modelStatistics.electricPower.negPBE[6])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.negPBE[5] = $START.modelStatistics.electricPower.negPBE[5] (0.0 = $START.modelStatistics.electricPower.negPBE[5])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.negPBE[4] = $START.modelStatistics.electricPower.negPBE[4] (0.0 = $START.modelStatistics.electricPower.negPBE[4])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.negPBE[3] = $START.modelStatistics.electricPower.negPBE[3] (0.0 = $START.modelStatistics.electricPower.negPBE[3])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.negPBE[2] = $START.modelStatistics.electricPower.negPBE[2] (0.0 = $START.modelStatistics.electricPower.negPBE[2])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.negPBE[1] = $START.modelStatistics.electricPower.negPBE[1] (0.0 = $START.modelStatistics.electricPower.negPBE[1])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.posPBE[6] = $START.modelStatistics.electricPower.posPBE[6] (0.0 = $START.modelStatistics.electricPower.posPBE[6])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.posPBE[5] = $START.modelStatistics.electricPower.posPBE[5] (0.0 = $START.modelStatistics.electricPower.posPBE[5])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.posPBE[4] = $START.modelStatistics.electricPower.posPBE[4] (0.0 = $START.modelStatistics.electricPower.posPBE[4])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.posPBE[3] = $START.modelStatistics.electricPower.posPBE[3] (0.0 = $START.modelStatistics.electricPower.posPBE[3])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.posPBE[2] = $START.modelStatistics.electricPower.posPBE[2] (0.0 = $START.modelStatistics.electricPower.posPBE[2])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.posPBE[1] = $START.modelStatistics.electricPower.posPBE[1] (0.0 = $START.modelStatistics.electricPower.posPBE[1])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.E[4] = $START.modelStatistics.electricPower.E[4] (0.0 = $START.modelStatistics.electricPower.E[4])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.E[3] = $START.modelStatistics.electricPower.E[3] (0.0 = $START.modelStatistics.electricPower.E[3])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.E[2] = $START.modelStatistics.electricPower.E[2] (0.0 = $START.modelStatistics.electricPower.E[2])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.E[1] = $START.modelStatistics.electricPower.E[1] (0.0 = $START.modelStatistics.electricPower.E[1])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.E[6] = $START.modelStatistics.electricPower.E[6] (0.0 = $START.modelStatistics.electricPower.E[6])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.E[5] = $START.modelStatistics.electricPower.E[5] (0.0 = $START.modelStatistics.electricPower.E[5])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE_heat[10] = $START.modelStatistics.gwpEmissions.m_CDE_heat[10] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE_heat[10])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE_heat[8] = $START.modelStatistics.gwpEmissions.m_CDE_heat[8] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE_heat[8])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE_heat[7] = $START.modelStatistics.gwpEmissions.m_CDE_heat[7] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE_heat[7])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE_heat[6] = $START.modelStatistics.gwpEmissions.m_CDE_heat[6] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE_heat[6])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE_heat[5] = $START.modelStatistics.gwpEmissions.m_CDE_heat[5] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE_heat[5])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE_heat[4] = $START.modelStatistics.gwpEmissions.m_CDE_heat[4] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE_heat[4])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE_heat[3] = $START.modelStatistics.gwpEmissions.m_CDE_heat[3] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE_heat[3])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE[9] = $START.modelStatistics.gwpEmissions.m_CDE[9] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE[9])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE[8] = $START.modelStatistics.gwpEmissions.m_CDE[8] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE[8])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE[7] = $START.modelStatistics.gwpEmissions.m_CDE[7] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE[7])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE[6] = $START.modelStatistics.gwpEmissions.m_CDE[6] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE[6])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE[5] = $START.modelStatistics.gwpEmissions.m_CDE[5] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE[5])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE[4] = $START.modelStatistics.gwpEmissions.m_CDE[4] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE[4])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE[3] = $START.modelStatistics.gwpEmissions.m_CDE[3] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE[3])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE[2] = $START.modelStatistics.gwpEmissions.m_CDE[2] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE[2])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE[1] = $START.modelStatistics.gwpEmissions.m_CDE[1] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE[1])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE_heat[9] = $START.modelStatistics.gwpEmissions.m_CDE_heat[9] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE_heat[9])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE_heat[2] = $START.modelStatistics.gwpEmissions.m_CDE_heat[2] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE_heat[2])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE_heat[1] = $START.modelStatistics.gwpEmissions.m_CDE_heat[1] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE_heat[1])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE[14] = $START.modelStatistics.gwpEmissions.m_CDE[14] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE[14])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE[13] = $START.modelStatistics.gwpEmissions.m_CDE[13] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE[13])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE[12] = $START.modelStatistics.gwpEmissions.m_CDE[12] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE[12])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE[11] = $START.modelStatistics.gwpEmissions.m_CDE[11] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE[11])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE[10] = $START.modelStatistics.gwpEmissions.m_CDE[10] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE[10])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.negSBE[6] = $START.modelStatistics.electricPower.negSBE[6] (0.0 = $START.modelStatistics.electricPower.negSBE[6])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.negSBE[5] = $START.modelStatistics.electricPower.negSBE[5] (0.0 = $START.modelStatistics.electricPower.negSBE[5])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.negSBE[4] = $START.modelStatistics.electricPower.negSBE[4] (0.0 = $START.modelStatistics.electricPower.negSBE[4])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.negSBE[3] = $START.modelStatistics.electricPower.negSBE[3] (0.0 = $START.modelStatistics.electricPower.negSBE[3])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.negSBE[2] = $START.modelStatistics.electricPower.negSBE[2] (0.0 = $START.modelStatistics.electricPower.negSBE[2])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.negSBE[1] = $START.modelStatistics.electricPower.negSBE[1] (0.0 = $START.modelStatistics.electricPower.negSBE[1])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.posSBE[6] = $START.modelStatistics.electricPower.posSBE[6] (0.0 = $START.modelStatistics.electricPower.posSBE[6])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.posSBE[5] = $START.modelStatistics.electricPower.posSBE[5] (0.0 = $START.modelStatistics.electricPower.posSBE[5])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.posSBE[4] = $START.modelStatistics.electricPower.posSBE[4] (0.0 = $START.modelStatistics.electricPower.posSBE[4])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.posSBE[3] = $START.modelStatistics.electricPower.posSBE[3] (0.0 = $START.modelStatistics.electricPower.posSBE[3])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.posSBE[2] = $START.modelStatistics.electricPower.posSBE[2] (0.0 = $START.modelStatistics.electricPower.posSBE[2])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.posSBE[1] = $START.modelStatistics.electricPower.posSBE[1] (0.0 = $START.modelStatistics.electricPower.posSBE[1])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.E_residual_pos = $START.modelStatistics.electricPower.E_residual_pos (0.0 = $START.modelStatistics.electricPower.E_residual_pos)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.E_residual_neg = $START.modelStatistics.electricPower.E_residual_neg (0.0 = $START.modelStatistics.electricPower.E_residual_neg)
Notification: Performance of analyzeInitialSystem (initialization): time 4.241/47.11, allocations: 429.3 MB / 14.4 GB, free: 0.8637 GB / 2.686 GB
Notification: Performance of solveInitialSystemEqSystem (initialization): time 0.0009896/47.11, allocations: 190.7 kB / 14.4 GB, free: 0.8637 GB / 2.686 GB
Notification: Performance of matching and sorting (n=12288) (initialization): time 0.3109/47.42, allocations: 102 MB / 14.5 GB, free: 0.8246 GB / 2.686 GB
Notification: Performance of prepare postOptimizeDAE: time 0.0006239/47.42, allocations: 290.3 kB / 14.5 GB, free: 0.8246 GB / 2.686 GB
Notification: Performance of postOpt simplifyComplexFunction (initialization): time 0.006737/47.43, allocations: 2.066 MB / 14.5 GB, free: 0.8242 GB / 2.686 GB
Notification: Performance of postOpt tearingSystem (initialization): time 0.295/47.72, allocations: 30.13 MB / 14.53 GB, free: 0.8124 GB / 2.686 GB
Notification: Performance of postOpt solveSimpleEquations (initialization): time 0.06112/47.78, allocations: 14.41 MB / 14.55 GB, free: 0.8084 GB / 2.686 GB
Notification: Performance of postOpt calculateStrongComponentJacobians (initialization): time 0.1194/47.9, allocations: 118.5 MB / 14.66 GB, free: 0.6864 GB / 2.686 GB
Notification: Performance of postOpt simplifyAllExpressions (initialization): time 0.08464/47.99, allocations: 2.828 MB / 14.66 GB, free: 0.6837 GB / 2.686 GB
Notification: Performance of postOpt collapseArrayExpressions (initialization): time 0.0205/48.01, allocations: 3.554 MB / 14.67 GB, free: 0.6803 GB / 2.686 GB
Warning: Assuming fixed start value for the following 64 variables:
         SteamPowerPlant2.turbine_HP1.getInputsRotary.shaft_a.phi:VARIABLE(flow=false unit = "rad" fixed = true protected = true )  "Absolute rotation angle of flange" type: Real
         SteamPowerPlant2.Turbine_IP.getInputsRotary.shaft_a.phi:VARIABLE(flow=false unit = "rad" fixed = true protected = true )  "Absolute rotation angle of flange" type: Real
         SteamPowerPlant2.Turbine_LP2.getInputsRotary.shaft_a.phi:VARIABLE(flow=false unit = "rad" fixed = true protected = true )  "Absolute rotation angle of flange" type: Real
         SteamPowerPlant2.Turbine_LP1.getInputsRotary.shaft_a.phi:VARIABLE(flow=false unit = "rad" fixed = true protected = true )  "Absolute rotation angle of flange" type: Real
         SteamPowerPlant1.turbine_HP1.getInputsRotary.shaft_a.phi:VARIABLE(flow=false unit = "rad" fixed = true protected = true )  "Absolute rotation angle of flange" type: Real
         SteamPowerPlant1.Turbine_IP.getInputsRotary.shaft_a.phi:VARIABLE(flow=false unit = "rad" fixed = true protected = true )  "Absolute rotation angle of flange" type: Real
         SteamPowerPlant1.Turbine_LP2.getInputsRotary.shaft_a.phi:VARIABLE(flow=false unit = "rad" fixed = true protected = true )  "Absolute rotation angle of flange" type: Real
         SteamPowerPlant1.Turbine_LP1.getInputsRotary.shaft_a.phi:VARIABLE(flow=false unit = "rad" fixed = true protected = true )  "Absolute rotation angle of flange" type: Real
         SteamPowerPlant2.steamGenerator_1_XRG.h_IP:VARIABLE(start = SteamPowerPlant2.steamGenerator_1_XRG.h_RH_start unit = "J/kg" fixed = true nominal = 1000.0 )  "Specific enthalpy before IP injector" type: Real
         SteamPowerPlant2.steamGenerator_1_XRG.p_IP:VARIABLE(min = 0.0 start = SteamPowerPlant2.steamGenerator_1_XRG.p_RH_start unit = "Pa" fixed = true nominal = 1e5 )  "Pressure at hot reheat outlet" type: Real
         SteamPowerPlant2.steamGenerator_1_XRG.h_HP:VARIABLE(start = SteamPowerPlant2.steamGenerator_1_XRG.h_LS_start unit = "J/kg" fixed = true nominal = 1000.0 )  "Specific enthalpy before HP injector" type: Real
         SteamPowerPlant2.steamGenerator_1_XRG.p_HP:VARIABLE(min = 0.0 start = SteamPowerPlant2.steamGenerator_1_XRG.p_LS_start unit = "Pa" fixed = true nominal = 1e5 )  "Live steam pressure" type: Real
         SteamPowerPlant2.condenser.shell.h_liq:VARIABLE(start = SteamPowerPlant2.condenser.shell.h_liq_start unit = "J/kg" fixed = true nominal = 1000.0 )  "Specific enthalpy of liquid phase" type: Real
         SteamPowerPlant2.condenser.shell.h_vap:VARIABLE(start = SteamPowerPlant2.condenser.shell.h_vap_start unit = "J/kg" fixed = true nominal = 1000.0 )  "Specific enthalpy of vapour phase" type: Real
         SteamPowerPlant2.condenser.shell.p_vap:VARIABLE(min = 0.0 start = SteamPowerPlant2.condenser.shell.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer )  "Vapour pressure" type: Real
         SteamPowerPlant2.feedWaterTank.volume.h_liq:VARIABLE(start = SteamPowerPlant2.feedWaterTank.volume.h_liq_start unit = "J/kg" fixed = true nominal = 1000.0 )  "Specific enthalpy of liquid phase" type: Real
         SteamPowerPlant2.feedWaterTank.volume.h_vap:VARIABLE(start = SteamPowerPlant2.feedWaterTank.volume.h_vap_start unit = "J/kg" fixed = true nominal = 1000.0 )  "Specific enthalpy of vapour phase" type: Real
         SteamPowerPlant2.feedWaterTank.volume.p_vap:VARIABLE(min = 0.0 start = SteamPowerPlant2.feedWaterTank.volume.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer )  "Vapour pressure" type: Real
         SteamPowerPlant2.join_IP.h:VARIABLE(start = SteamPowerPlant2.join_IP.h_start unit = "J/kg" fixed = true nominal = 1000.0 )  type: Real
         SteamPowerPlant2.join_IP.p:VARIABLE(min = 0.0 start = SteamPowerPlant2.join_IP.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer )  "System pressure" type: Real
         SteamPowerPlant2.join_LP1.h:VARIABLE(start = SteamPowerPlant2.join_LP1.h_start unit = "J/kg" fixed = true nominal = 1000.0 )  type: Real
         SteamPowerPlant2.join_LP1.p:VARIABLE(min = 0.0 start = SteamPowerPlant2.join_LP1.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer )  "System pressure" type: Real
         SteamPowerPlant2.preheater_HP.tubes.h:VARIABLE(start = SteamPowerPlant2.preheater_HP.tubes.h_start unit = "J/kg" fixed = true nominal = 1000.0 protected = true )  "spec. enthalpy state" type: Real
         SteamPowerPlant2.preheater_HP.shell.h_liq:VARIABLE(start = SteamPowerPlant2.preheater_HP.shell.h_liq_start unit = "J/kg" fixed = true nominal = 1000.0 )  "Specific enthalpy of liquid phase" type: Real
         SteamPowerPlant2.preheater_HP.shell.h_vap:VARIABLE(start = SteamPowerPlant2.preheater_HP.shell.h_vap_start unit = "J/kg" fixed = true nominal = 1000.0 )  "Specific enthalpy of vapour phase" type: Real
         SteamPowerPlant2.preheater_HP.shell.p_vap:VARIABLE(min = 0.0 start = SteamPowerPlant2.preheater_HP.shell.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer )  "Vapour pressure" type: Real
         SteamPowerPlant2.preheater_LP1.tubes.h:VARIABLE(start = SteamPowerPlant2.preheater_LP1.tubes.h_start unit = "J/kg" fixed = true nominal = 1000.0 protected = true )  "spec. enthalpy state" type: Real
         SteamPowerPlant2.preheater_LP1.tubes.p:VARIABLE(min = 0.0 start = SteamPowerPlant2.preheater_LP1.tubes.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer )  "System pressure" type: Real
         SteamPowerPlant2.preheater_LP1.shell.h_liq:VARIABLE(start = SteamPowerPlant2.preheater_LP1.shell.h_liq_start unit = "J/kg" fixed = true nominal = 1000.0 )  "Specific enthalpy of liquid phase" type: Real
         SteamPowerPlant2.preheater_LP1.shell.h_vap:VARIABLE(start = SteamPowerPlant2.preheater_LP1.shell.h_vap_start unit = "J/kg" fixed = true nominal = 1000.0 )  "Specific enthalpy of vapour phase" type: Real
         SteamPowerPlant2.preheater_LP1.shell.p_vap:VARIABLE(min = 0.0 start = SteamPowerPlant2.preheater_LP1.shell.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer )  "Vapour pressure" type: Real
         SteamPowerPlant2.join_LP_main.h:VARIABLE(start = SteamPowerPlant2.join_LP_main.h_start unit = "J/kg" fixed = true nominal = 1000.0 )  type: Real
         SteamPowerPlant2.join_LP_main.p:VARIABLE(min = 0.0 start = SteamPowerPlant2.join_LP_main.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer )  "System pressure" type: Real
         SteamPowerPlant1.steamGenerator_1_XRG.h_IP:VARIABLE(start = SteamPowerPlant1.steamGenerator_1_XRG.h_RH_start unit = "J/kg" fixed = true nominal = 1000.0 )  "Specific enthalpy before IP injector" type: Real
         SteamPowerPlant1.steamGenerator_1_XRG.p_IP:VARIABLE(min = 0.0 start = SteamPowerPlant1.steamGenerator_1_XRG.p_RH_start unit = "Pa" fixed = true nominal = 1e5 )  "Pressure at hot reheat outlet" type: Real
         SteamPowerPlant1.steamGenerator_1_XRG.h_HP:VARIABLE(start = SteamPowerPlant1.steamGenerator_1_XRG.h_LS_start unit = "J/kg" fixed = true nominal = 1000.0 )  "Specific enthalpy before HP injector" type: Real
         SteamPowerPlant1.steamGenerator_1_XRG.p_HP:VARIABLE(min = 0.0 start = SteamPowerPlant1.steamGenerator_1_XRG.p_LS_start unit = "Pa" fixed = true nominal = 1e5 )  "Live steam pressure" type: Real
         SteamPowerPlant1.condenser.shell.h_liq:VARIABLE(start = SteamPowerPlant1.condenser.shell.h_liq_start unit = "J/kg" fixed = true nominal = 1000.0 )  "Specific enthalpy of liquid phase" type: Real
         SteamPowerPlant1.condenser.shell.h_vap:VARIABLE(start = SteamPowerPlant1.condenser.shell.h_vap_start unit = "J/kg" fixed = true nominal = 1000.0 )  "Specific enthalpy of vapour phase" type: Real
         SteamPowerPlant1.condenser.shell.p_vap:VARIABLE(min = 0.0 start = SteamPowerPlant1.condenser.shell.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer )  "Vapour pressure" type: Real
         SteamPowerPlant1.feedWaterTank.volume.h_liq:VARIABLE(start = SteamPowerPlant1.feedWaterTank.volume.h_liq_start unit = "J/kg" fixed = true nominal = 1000.0 )  "Specific enthalpy of liquid phase" type: Real
         SteamPowerPlant1.feedWaterTank.volume.h_vap:VARIABLE(start = SteamPowerPlant1.feedWaterTank.volume.h_vap_start unit = "J/kg" fixed = true nominal = 1000.0 )  "Specific enthalpy of vapour phase" type: Real
         SteamPowerPlant1.feedWaterTank.volume.p_vap:VARIABLE(min = 0.0 start = SteamPowerPlant1.feedWaterTank.volume.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer )  "Vapour pressure" type: Real
         SteamPowerPlant1.join_IP.h:VARIABLE(start = SteamPowerPlant1.join_IP.h_start unit = "J/kg" fixed = true nominal = 1000.0 )  type: Real
         SteamPowerPlant1.join_IP.p:VARIABLE(min = 0.0 start = SteamPowerPlant1.join_IP.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer )  "System pressure" type: Real
         SteamPowerPlant1.join_LP1.h:VARIABLE(start = SteamPowerPlant1.join_LP1.h_start unit = "J/kg" fixed = true nominal = 1000.0 )  type: Real
         SteamPowerPlant1.join_LP1.p:VARIABLE(min = 0.0 start = SteamPowerPlant1.join_LP1.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer )  "System pressure" type: Real
         SteamPowerPlant1.preheater_HP.tubes.h:VARIABLE(start = SteamPowerPlant1.preheater_HP.tubes.h_start unit = "J/kg" fixed = true nominal = 1000.0 protected = true )  "spec. enthalpy state" type: Real
         SteamPowerPlant1.preheater_HP.shell.h_liq:VARIABLE(start = SteamPowerPlant1.preheater_HP.shell.h_liq_start unit = "J/kg" fixed = true nominal = 1000.0 )  "Specific enthalpy of liquid phase" type: Real
         SteamPowerPlant1.preheater_HP.shell.h_vap:VARIABLE(start = SteamPowerPlant1.preheater_HP.shell.h_vap_start unit = "J/kg" fixed = true nominal = 1000.0 )  "Specific enthalpy of vapour phase" type: Real
         SteamPowerPlant1.preheater_HP.shell.p_vap:VARIABLE(min = 0.0 start = SteamPowerPlant1.preheater_HP.shell.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer )  "Vapour pressure" type: Real
         SteamPowerPlant1.preheater_LP1.tubes.h:VARIABLE(start = SteamPowerPlant1.preheater_LP1.tubes.h_start unit = "J/kg" fixed = true nominal = 1000.0 protected = true )  "spec. enthalpy state" type: Real
         SteamPowerPlant1.preheater_LP1.tubes.p:VARIABLE(min = 0.0 start = SteamPowerPlant1.preheater_LP1.tubes.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer )  "System pressure" type: Real
         SteamPowerPlant1.preheater_LP1.shell.h_liq:VARIABLE(start = SteamPowerPlant1.preheater_LP1.shell.h_liq_start unit = "J/kg" fixed = true nominal = 1000.0 )  "Specific enthalpy of liquid phase" type: Real
         SteamPowerPlant1.preheater_LP1.shell.h_vap:VARIABLE(start = SteamPowerPlant1.preheater_LP1.shell.h_vap_start unit = "J/kg" fixed = true nominal = 1000.0 )  "Specific enthalpy of vapour phase" type: Real
         SteamPowerPlant1.preheater_LP1.shell.p_vap:VARIABLE(min = 0.0 start = SteamPowerPlant1.preheater_LP1.shell.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer )  "Vapour pressure" type: Real
         SteamPowerPlant1.join_LP_main.h:VARIABLE(start = SteamPowerPlant1.join_LP_main.h_start unit = "J/kg" fixed = true nominal = 1000.0 )  type: Real
         SteamPowerPlant1.join_LP_main.p:VARIABLE(min = 0.0 start = SteamPowerPlant1.join_LP_main.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer )  "System pressure" type: Real
         SteamPowerPlant1.PI_preheater1.switch_OnOff.u2:DISCRETE(flow=false fixed = true )  "Connector of Boolean input signal" type: Boolean
         SteamPowerPlant1.PI_Pump_cond.switch_OnOff.u2:DISCRETE(flow=false fixed = true )  "Connector of Boolean input signal" type: Boolean
         SteamPowerPlant1.steamGenerator_1_XRG.heatRelease.x_scaled[2]:VARIABLE(fixed = true protected = true )  "Scaled vector x" type: Real [2]
         SteamPowerPlant2.PI_preheater1.switch_OnOff.u2:DISCRETE(flow=false fixed = true )  "Connector of Boolean input signal" type: Boolean
         SteamPowerPlant2.PI_Pump_cond.switch_OnOff.u2:DISCRETE(flow=false fixed = true )  "Connector of Boolean input signal" type: Boolean
         SteamPowerPlant2.steamGenerator_1_XRG.heatRelease.x_scaled[2]:VARIABLE(fixed = true protected = true )  "Scaled vector x" type: Real [2]
Warning: The initial conditions are over specified. The following 62 initial equations are redundant, so they are removed from the initialization system:
         modelStatistics.heatingPower.E[6] = $START.modelStatistics.heatingPower.E[6]
         modelStatistics.heatingPower.E[4] = $START.modelStatistics.heatingPower.E[4]
         modelStatistics.heatingPower.E[3] = $START.modelStatistics.heatingPower.E[3]
         modelStatistics.heatingPower.E[2] = $START.modelStatistics.heatingPower.E[2]
         modelStatistics.heatingPower.E[1] = $START.modelStatistics.heatingPower.E[1]
         modelStatistics.heatingPower.E[5] = $START.modelStatistics.heatingPower.E[5]
         modelStatistics.electricPower.negPBE[6] = $START.modelStatistics.electricPower.negPBE[6]
         modelStatistics.electricPower.negPBE[5] = $START.modelStatistics.electricPower.negPBE[5]
         modelStatistics.electricPower.negPBE[4] = $START.modelStatistics.electricPower.negPBE[4]
         modelStatistics.electricPower.negPBE[3] = $START.modelStatistics.electricPower.negPBE[3]
         modelStatistics.electricPower.negPBE[2] = $START.modelStatistics.electricPower.negPBE[2]
         modelStatistics.electricPower.negPBE[1] = $START.modelStatistics.electricPower.negPBE[1]
         modelStatistics.electricPower.posPBE[6] = $START.modelStatistics.electricPower.posPBE[6]
         modelStatistics.electricPower.posPBE[5] = $START.modelStatistics.electricPower.posPBE[5]
         modelStatistics.electricPower.posPBE[4] = $START.modelStatistics.electricPower.posPBE[4]
         modelStatistics.electricPower.posPBE[3] = $START.modelStatistics.electricPower.posPBE[3]
         modelStatistics.electricPower.posPBE[2] = $START.modelStatistics.electricPower.posPBE[2]
         modelStatistics.electricPower.posPBE[1] = $START.modelStatistics.electricPower.posPBE[1]
         modelStatistics.electricPower.E[4] = $START.modelStatistics.electricPower.E[4]
         modelStatistics.electricPower.E[3] = $START.modelStatistics.electricPower.E[3]
         modelStatistics.electricPower.E[2] = $START.modelStatistics.electricPower.E[2]
         modelStatistics.electricPower.E[1] = $START.modelStatistics.electricPower.E[1]
         modelStatistics.electricPower.E[6] = $START.modelStatistics.electricPower.E[6]
         modelStatistics.electricPower.E[5] = $START.modelStatistics.electricPower.E[5]
         modelStatistics.gwpEmissions.m_CDE_heat[10] = $START.modelStatistics.gwpEmissions.m_CDE_heat[10]
         modelStatistics.gwpEmissions.m_CDE_heat[8] = $START.modelStatistics.gwpEmissions.m_CDE_heat[8]
         modelStatistics.gwpEmissions.m_CDE_heat[7] = $START.modelStatistics.gwpEmissions.m_CDE_heat[7]
         modelStatistics.gwpEmissions.m_CDE_heat[6] = $START.modelStatistics.gwpEmissions.m_CDE_heat[6]
         modelStatistics.gwpEmissions.m_CDE_heat[5] = $START.modelStatistics.gwpEmissions.m_CDE_heat[5]
         modelStatistics.gwpEmissions.m_CDE_heat[4] = $START.modelStatistics.gwpEmissions.m_CDE_heat[4]
         modelStatistics.gwpEmissions.m_CDE_heat[3] = $START.modelStatistics.gwpEmissions.m_CDE_heat[3]
         modelStatistics.gwpEmissions.m_CDE[9] = $START.modelStatistics.gwpEmissions.m_CDE[9]
         modelStatistics.gwpEmissions.m_CDE[8] = $START.modelStatistics.gwpEmissions.m_CDE[8]
         modelStatistics.gwpEmissions.m_CDE[7] = $START.modelStatistics.gwpEmissions.m_CDE[7]
         modelStatistics.gwpEmissions.m_CDE[6] = $START.modelStatistics.gwpEmissions.m_CDE[6]
         modelStatistics.gwpEmissions.m_CDE[5] = $START.modelStatistics.gwpEmissions.m_CDE[5]
         modelStatistics.gwpEmissions.m_CDE[4] = $START.modelStatistics.gwpEmissions.m_CDE[4]
         modelStatistics.gwpEmissions.m_CDE[3] = $START.modelStatistics.gwpEmissions.m_CDE[3]
         modelStatistics.gwpEmissions.m_CDE[2] = $START.modelStatistics.gwpEmissions.m_CDE[2]
         modelStatistics.gwpEmissions.m_CDE[1] = $START.modelStatistics.gwpEmissions.m_CDE[1]
         modelStatistics.gwpEmissions.m_CDE_heat[9] = $START.modelStatistics.gwpEmissions.m_CDE_heat[9]
         modelStatistics.gwpEmissions.m_CDE_heat[2] = $START.modelStatistics.gwpEmissions.m_CDE_heat[2]
         modelStatistics.gwpEmissions.m_CDE_heat[1] = $START.modelStatistics.gwpEmissions.m_CDE_heat[1]
         modelStatistics.gwpEmissions.m_CDE[14] = $START.modelStatistics.gwpEmissions.m_CDE[14]
         modelStatistics.gwpEmissions.m_CDE[13] = $START.modelStatistics.gwpEmissions.m_CDE[13]
         modelStatistics.gwpEmissions.m_CDE[12] = $START.modelStatistics.gwpEmissions.m_CDE[12]
         modelStatistics.gwpEmissions.m_CDE[11] = $START.modelStatistics.gwpEmissions.m_CDE[11]
         modelStatistics.gwpEmissions.m_CDE[10] = $START.modelStatistics.gwpEmissions.m_CDE[10]
         modelStatistics.electricPower.negSBE[6] = $START.modelStatistics.electricPower.negSBE[6]
         modelStatistics.electricPower.negSBE[5] = $START.modelStatistics.electricPower.negSBE[5]
         modelStatistics.electricPower.negSBE[4] = $START.modelStatistics.electricPower.negSBE[4]
         modelStatistics.electricPower.negSBE[3] = $START.modelStatistics.electricPower.negSBE[3]
         modelStatistics.electricPower.negSBE[2] = $START.modelStatistics.electricPower.negSBE[2]
         modelStatistics.electricPower.negSBE[1] = $START.modelStatistics.electricPower.negSBE[1]
         modelStatistics.electricPower.posSBE[6] = $START.modelStatistics.electricPower.posSBE[6]
         modelStatistics.electricPower.posSBE[5] = $START.modelStatistics.electricPower.posSBE[5]
         modelStatistics.electricPower.posSBE[4] = $START.modelStatistics.electricPower.posSBE[4]
         modelStatistics.electricPower.posSBE[3] = $START.modelStatistics.electricPower.posSBE[3]
         modelStatistics.electricPower.posSBE[2] = $START.modelStatistics.electricPower.posSBE[2]
         modelStatistics.electricPower.posSBE[1] = $START.modelStatistics.electricPower.posSBE[1]
         modelStatistics.electricPower.E_residual_pos = $START.modelStatistics.electricPower.E_residual_pos
         modelStatistics.electricPower.E_residual_neg = $START.modelStatistics.electricPower.E_residual_neg.
Notification: Performance of preBalanceInitialSystem (initialization_lambda0): time 0.1504/48.16, allocations: 55.55 MB / 14.72 GB, free: 0.626 GB / 2.686 GB
Notification: Performance of partitionIndependentBlocks (initialization_lambda0): time 0.117/48.28, allocations: 53.91 MB / 14.77 GB, free: 0.564 GB / 2.686 GB
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.heatingPower.E[6] = $START.modelStatistics.heatingPower.E[6] (0.0 = $START.modelStatistics.heatingPower.E[6])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.heatingPower.E[4] = $START.modelStatistics.heatingPower.E[4] (0.0 = $START.modelStatistics.heatingPower.E[4])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.heatingPower.E[3] = $START.modelStatistics.heatingPower.E[3] (0.0 = $START.modelStatistics.heatingPower.E[3])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.heatingPower.E[2] = $START.modelStatistics.heatingPower.E[2] (0.0 = $START.modelStatistics.heatingPower.E[2])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.heatingPower.E[1] = $START.modelStatistics.heatingPower.E[1] (0.0 = $START.modelStatistics.heatingPower.E[1])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.heatingPower.E[5] = $START.modelStatistics.heatingPower.E[5] (0.0 = $START.modelStatistics.heatingPower.E[5])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.negPBE[6] = $START.modelStatistics.electricPower.negPBE[6] (0.0 = $START.modelStatistics.electricPower.negPBE[6])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.negPBE[5] = $START.modelStatistics.electricPower.negPBE[5] (0.0 = $START.modelStatistics.electricPower.negPBE[5])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.negPBE[4] = $START.modelStatistics.electricPower.negPBE[4] (0.0 = $START.modelStatistics.electricPower.negPBE[4])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.negPBE[3] = $START.modelStatistics.electricPower.negPBE[3] (0.0 = $START.modelStatistics.electricPower.negPBE[3])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.negPBE[2] = $START.modelStatistics.electricPower.negPBE[2] (0.0 = $START.modelStatistics.electricPower.negPBE[2])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.negPBE[1] = $START.modelStatistics.electricPower.negPBE[1] (0.0 = $START.modelStatistics.electricPower.negPBE[1])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.posPBE[6] = $START.modelStatistics.electricPower.posPBE[6] (0.0 = $START.modelStatistics.electricPower.posPBE[6])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.posPBE[5] = $START.modelStatistics.electricPower.posPBE[5] (0.0 = $START.modelStatistics.electricPower.posPBE[5])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.posPBE[4] = $START.modelStatistics.electricPower.posPBE[4] (0.0 = $START.modelStatistics.electricPower.posPBE[4])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.posPBE[3] = $START.modelStatistics.electricPower.posPBE[3] (0.0 = $START.modelStatistics.electricPower.posPBE[3])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.posPBE[2] = $START.modelStatistics.electricPower.posPBE[2] (0.0 = $START.modelStatistics.electricPower.posPBE[2])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.posPBE[1] = $START.modelStatistics.electricPower.posPBE[1] (0.0 = $START.modelStatistics.electricPower.posPBE[1])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.E[4] = $START.modelStatistics.electricPower.E[4] (0.0 = $START.modelStatistics.electricPower.E[4])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.E[3] = $START.modelStatistics.electricPower.E[3] (0.0 = $START.modelStatistics.electricPower.E[3])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.E[2] = $START.modelStatistics.electricPower.E[2] (0.0 = $START.modelStatistics.electricPower.E[2])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.E[1] = $START.modelStatistics.electricPower.E[1] (0.0 = $START.modelStatistics.electricPower.E[1])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.E[6] = $START.modelStatistics.electricPower.E[6] (0.0 = $START.modelStatistics.electricPower.E[6])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.E[5] = $START.modelStatistics.electricPower.E[5] (0.0 = $START.modelStatistics.electricPower.E[5])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE_heat[10] = $START.modelStatistics.gwpEmissions.m_CDE_heat[10] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE_heat[10])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE_heat[8] = $START.modelStatistics.gwpEmissions.m_CDE_heat[8] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE_heat[8])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE_heat[7] = $START.modelStatistics.gwpEmissions.m_CDE_heat[7] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE_heat[7])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE_heat[6] = $START.modelStatistics.gwpEmissions.m_CDE_heat[6] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE_heat[6])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE_heat[5] = $START.modelStatistics.gwpEmissions.m_CDE_heat[5] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE_heat[5])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE_heat[4] = $START.modelStatistics.gwpEmissions.m_CDE_heat[4] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE_heat[4])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE_heat[3] = $START.modelStatistics.gwpEmissions.m_CDE_heat[3] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE_heat[3])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE[9] = $START.modelStatistics.gwpEmissions.m_CDE[9] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE[9])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE[8] = $START.modelStatistics.gwpEmissions.m_CDE[8] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE[8])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE[7] = $START.modelStatistics.gwpEmissions.m_CDE[7] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE[7])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE[6] = $START.modelStatistics.gwpEmissions.m_CDE[6] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE[6])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE[5] = $START.modelStatistics.gwpEmissions.m_CDE[5] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE[5])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE[4] = $START.modelStatistics.gwpEmissions.m_CDE[4] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE[4])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE[3] = $START.modelStatistics.gwpEmissions.m_CDE[3] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE[3])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE[2] = $START.modelStatistics.gwpEmissions.m_CDE[2] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE[2])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE[1] = $START.modelStatistics.gwpEmissions.m_CDE[1] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE[1])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE_heat[9] = $START.modelStatistics.gwpEmissions.m_CDE_heat[9] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE_heat[9])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE_heat[2] = $START.modelStatistics.gwpEmissions.m_CDE_heat[2] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE_heat[2])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE_heat[1] = $START.modelStatistics.gwpEmissions.m_CDE_heat[1] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE_heat[1])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE[14] = $START.modelStatistics.gwpEmissions.m_CDE[14] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE[14])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE[13] = $START.modelStatistics.gwpEmissions.m_CDE[13] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE[13])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE[12] = $START.modelStatistics.gwpEmissions.m_CDE[12] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE[12])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE[11] = $START.modelStatistics.gwpEmissions.m_CDE[11] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE[11])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.gwpEmissions.m_CDE[10] = $START.modelStatistics.gwpEmissions.m_CDE[10] (0.0 = $START.modelStatistics.gwpEmissions.m_CDE[10])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.negSBE[6] = $START.modelStatistics.electricPower.negSBE[6] (0.0 = $START.modelStatistics.electricPower.negSBE[6])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.negSBE[5] = $START.modelStatistics.electricPower.negSBE[5] (0.0 = $START.modelStatistics.electricPower.negSBE[5])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.negSBE[4] = $START.modelStatistics.electricPower.negSBE[4] (0.0 = $START.modelStatistics.electricPower.negSBE[4])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.negSBE[3] = $START.modelStatistics.electricPower.negSBE[3] (0.0 = $START.modelStatistics.electricPower.negSBE[3])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.negSBE[2] = $START.modelStatistics.electricPower.negSBE[2] (0.0 = $START.modelStatistics.electricPower.negSBE[2])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.negSBE[1] = $START.modelStatistics.electricPower.negSBE[1] (0.0 = $START.modelStatistics.electricPower.negSBE[1])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.posSBE[6] = $START.modelStatistics.electricPower.posSBE[6] (0.0 = $START.modelStatistics.electricPower.posSBE[6])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.posSBE[5] = $START.modelStatistics.electricPower.posSBE[5] (0.0 = $START.modelStatistics.electricPower.posSBE[5])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.posSBE[4] = $START.modelStatistics.electricPower.posSBE[4] (0.0 = $START.modelStatistics.electricPower.posSBE[4])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.posSBE[3] = $START.modelStatistics.electricPower.posSBE[3] (0.0 = $START.modelStatistics.electricPower.posSBE[3])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.posSBE[2] = $START.modelStatistics.electricPower.posSBE[2] (0.0 = $START.modelStatistics.electricPower.posSBE[2])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.posSBE[1] = $START.modelStatistics.electricPower.posSBE[1] (0.0 = $START.modelStatistics.electricPower.posSBE[1])
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.E_residual_pos = $START.modelStatistics.electricPower.E_residual_pos (0.0 = $START.modelStatistics.electricPower.E_residual_pos)
Warning: It was not possible to determine if the initialization problem is consistent, because of not evaluable parameters/start values during compile time: modelStatistics.electricPower.E_residual_neg = $START.modelStatistics.electricPower.E_residual_neg (0.0 = $START.modelStatistics.electricPower.E_residual_neg)
Notification: Performance of analyzeInitialSystem (initialization_lambda0): time 2.474/50.75, allocations: 423.7 MB / 15.19 GB, free: 143.6 MB / 2.686 GB
Notification: Performance of solveInitialSystemEqSystem (initialization_lambda0): time 0.001308/50.75, allocations: 188 kB / 15.19 GB, free: 143.4 MB / 2.686 GB
Notification: Performance of matching and sorting (n=12288) (initialization_lambda0): time 2.03/52.78, allocations: 99.33 MB / 15.29 GB, free: 0.8447 GB / 2.686 GB
Notification: Performance of prepare postOptimizeDAE: time 0.0005276/52.78, allocations: 293.7 kB / 15.29 GB, free: 0.8447 GB / 2.686 GB
Notification: Performance of postOpt simplifyComplexFunction (initialization): time 0.005974/52.79, allocations: 2.06 MB / 15.29 GB, free: 0.8447 GB / 2.686 GB
Notification: Performance of postOpt tearingSystem (initialization): time 0.2004/52.99, allocations: 21.25 MB / 15.31 GB, free: 0.8444 GB / 2.686 GB
Notification: Performance of postOpt solveSimpleEquations (initialization): time 0.06427/53.05, allocations: 14.6 MB / 15.32 GB, free: 0.8435 GB / 2.686 GB
Notification: Performance of postOpt calculateStrongComponentJacobians (initialization): time 0.1173/53.17, allocations: 126.5 MB / 15.45 GB, free: 0.7443 GB / 2.686 GB
Notification: Performance of postOpt simplifyAllExpressions (initialization): time 0.08975/53.26, allocations: 2.765 MB / 15.45 GB, free: 0.7432 GB / 2.686 GB
Notification: Performance of postOpt collapseArrayExpressions (initialization): time 0.0194/53.28, allocations: 3.509 MB / 15.45 GB, free: 0.7427 GB / 2.686 GB
Warning: Assuming fixed start value for the following 64 variables:
         SteamPowerPlant2.turbine_HP1.getInputsRotary.shaft_a.phi:VARIABLE(flow=false unit = "rad" fixed = true protected = true )  "Absolute rotation angle of flange" type: Real
         SteamPowerPlant2.Turbine_IP.getInputsRotary.shaft_a.phi:VARIABLE(flow=false unit = "rad" fixed = true protected = true )  "Absolute rotation angle of flange" type: Real
         SteamPowerPlant2.Turbine_LP2.getInputsRotary.shaft_a.phi:VARIABLE(flow=false unit = "rad" fixed = true protected = true )  "Absolute rotation angle of flange" type: Real
         SteamPowerPlant2.Turbine_LP1.getInputsRotary.shaft_a.phi:VARIABLE(flow=false unit = "rad" fixed = true protected = true )  "Absolute rotation angle of flange" type: Real
         SteamPowerPlant1.turbine_HP1.getInputsRotary.shaft_a.phi:VARIABLE(flow=false unit = "rad" fixed = true protected = true )  "Absolute rotation angle of flange" type: Real
         SteamPowerPlant1.Turbine_IP.getInputsRotary.shaft_a.phi:VARIABLE(flow=false unit = "rad" fixed = true protected = true )  "Absolute rotation angle of flange" type: Real
         SteamPowerPlant1.Turbine_LP2.getInputsRotary.shaft_a.phi:VARIABLE(flow=false unit = "rad" fixed = true protected = true )  "Absolute rotation angle of flange" type: Real
         SteamPowerPlant1.Turbine_LP1.getInputsRotary.shaft_a.phi:VARIABLE(flow=false unit = "rad" fixed = true protected = true )  "Absolute rotation angle of flange" type: Real
         SteamPowerPlant2.steamGenerator_1_XRG.h_IP:VARIABLE(start = SteamPowerPlant2.steamGenerator_1_XRG.h_RH_start unit = "J/kg" fixed = true nominal = 1000.0 )  "Specific enthalpy before IP injector" type: Real
         SteamPowerPlant2.steamGenerator_1_XRG.p_IP:VARIABLE(min = 0.0 start = SteamPowerPlant2.steamGenerator_1_XRG.p_RH_start unit = "Pa" fixed = true nominal = 1e5 )  "Pressure at hot reheat outlet" type: Real
         SteamPowerPlant2.steamGenerator_1_XRG.h_HP:VARIABLE(start = SteamPowerPlant2.steamGenerator_1_XRG.h_LS_start unit = "J/kg" fixed = true nominal = 1000.0 )  "Specific enthalpy before HP injector" type: Real
         SteamPowerPlant2.steamGenerator_1_XRG.p_HP:VARIABLE(min = 0.0 start = SteamPowerPlant2.steamGenerator_1_XRG.p_LS_start unit = "Pa" fixed = true nominal = 1e5 )  "Live steam pressure" type: Real
         SteamPowerPlant2.condenser.shell.h_liq:VARIABLE(start = SteamPowerPlant2.condenser.shell.h_liq_start unit = "J/kg" fixed = true nominal = 1000.0 )  "Specific enthalpy of liquid phase" type: Real
         SteamPowerPlant2.condenser.shell.h_vap:VARIABLE(start = SteamPowerPlant2.condenser.shell.h_vap_start unit = "J/kg" fixed = true nominal = 1000.0 )  "Specific enthalpy of vapour phase" type: Real
         SteamPowerPlant2.condenser.shell.p_vap:VARIABLE(min = 0.0 start = SteamPowerPlant2.condenser.shell.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer )  "Vapour pressure" type: Real
         SteamPowerPlant2.feedWaterTank.volume.h_liq:VARIABLE(start = SteamPowerPlant2.feedWaterTank.volume.h_liq_start unit = "J/kg" fixed = true nominal = 1000.0 )  "Specific enthalpy of liquid phase" type: Real
         SteamPowerPlant2.feedWaterTank.volume.h_vap:VARIABLE(start = SteamPowerPlant2.feedWaterTank.volume.h_vap_start unit = "J/kg" fixed = true nominal = 1000.0 )  "Specific enthalpy of vapour phase" type: Real
         SteamPowerPlant2.feedWaterTank.volume.p_vap:VARIABLE(min = 0.0 start = SteamPowerPlant2.feedWaterTank.volume.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer )  "Vapour pressure" type: Real
         SteamPowerPlant2.join_IP.h:VARIABLE(start = SteamPowerPlant2.join_IP.h_start unit = "J/kg" fixed = true nominal = 1000.0 )  type: Real
         SteamPowerPlant2.join_IP.p:VARIABLE(min = 0.0 start = SteamPowerPlant2.join_IP.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer )  "System pressure" type: Real
         SteamPowerPlant2.join_LP1.h:VARIABLE(start = SteamPowerPlant2.join_LP1.h_start unit = "J/kg" fixed = true nominal = 1000.0 )  type: Real
         SteamPowerPlant2.join_LP1.p:VARIABLE(min = 0.0 start = SteamPowerPlant2.join_LP1.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer )  "System pressure" type: Real
         SteamPowerPlant2.preheater_HP.tubes.h:VARIABLE(start = SteamPowerPlant2.preheater_HP.tubes.h_start unit = "J/kg" fixed = true nominal = 1000.0 protected = true )  "spec. enthalpy state" type: Real
         SteamPowerPlant2.preheater_HP.shell.h_liq:VARIABLE(start = SteamPowerPlant2.preheater_HP.shell.h_liq_start unit = "J/kg" fixed = true nominal = 1000.0 )  "Specific enthalpy of liquid phase" type: Real
         SteamPowerPlant2.preheater_HP.shell.h_vap:VARIABLE(start = SteamPowerPlant2.preheater_HP.shell.h_vap_start unit = "J/kg" fixed = true nominal = 1000.0 )  "Specific enthalpy of vapour phase" type: Real
         SteamPowerPlant2.preheater_HP.shell.p_vap:VARIABLE(min = 0.0 start = SteamPowerPlant2.preheater_HP.shell.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer )  "Vapour pressure" type: Real
         SteamPowerPlant2.preheater_LP1.tubes.h:VARIABLE(start = SteamPowerPlant2.preheater_LP1.tubes.h_start unit = "J/kg" fixed = true nominal = 1000.0 protected = true )  "spec. enthalpy state" type: Real
         SteamPowerPlant2.preheater_LP1.tubes.p:VARIABLE(min = 0.0 start = SteamPowerPlant2.preheater_LP1.tubes.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer )  "System pressure" type: Real
         SteamPowerPlant2.preheater_LP1.shell.h_liq:VARIABLE(start = SteamPowerPlant2.preheater_LP1.shell.h_liq_start unit = "J/kg" fixed = true nominal = 1000.0 )  "Specific enthalpy of liquid phase" type: Real
         SteamPowerPlant2.preheater_LP1.shell.h_vap:VARIABLE(start = SteamPowerPlant2.preheater_LP1.shell.h_vap_start unit = "J/kg" fixed = true nominal = 1000.0 )  "Specific enthalpy of vapour phase" type: Real
         SteamPowerPlant2.preheater_LP1.shell.p_vap:VARIABLE(min = 0.0 start = SteamPowerPlant2.preheater_LP1.shell.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer )  "Vapour pressure" type: Real
         SteamPowerPlant2.join_LP_main.h:VARIABLE(start = SteamPowerPlant2.join_LP_main.h_start unit = "J/kg" fixed = true nominal = 1000.0 )  type: Real
         SteamPowerPlant2.join_LP_main.p:VARIABLE(min = 0.0 start = SteamPowerPlant2.join_LP_main.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer )  "System pressure" type: Real
         SteamPowerPlant1.steamGenerator_1_XRG.h_IP:VARIABLE(start = SteamPowerPlant1.steamGenerator_1_XRG.h_RH_start unit = "J/kg" fixed = true nominal = 1000.0 )  "Specific enthalpy before IP injector" type: Real
         SteamPowerPlant1.steamGenerator_1_XRG.p_IP:VARIABLE(min = 0.0 start = SteamPowerPlant1.steamGenerator_1_XRG.p_RH_start unit = "Pa" fixed = true nominal = 1e5 )  "Pressure at hot reheat outlet" type: Real
         SteamPowerPlant1.steamGenerator_1_XRG.h_HP:VARIABLE(start = SteamPowerPlant1.steamGenerator_1_XRG.h_LS_start unit = "J/kg" fixed = true nominal = 1000.0 )  "Specific enthalpy before HP injector" type: Real
         SteamPowerPlant1.steamGenerator_1_XRG.p_HP:VARIABLE(min = 0.0 start = SteamPowerPlant1.steamGenerator_1_XRG.p_LS_start unit = "Pa" fixed = true nominal = 1e5 )  "Live steam pressure" type: Real
         SteamPowerPlant1.condenser.shell.h_liq:VARIABLE(start = SteamPowerPlant1.condenser.shell.h_liq_start unit = "J/kg" fixed = true nominal = 1000.0 )  "Specific enthalpy of liquid phase" type: Real
         SteamPowerPlant1.condenser.shell.h_vap:VARIABLE(start = SteamPowerPlant1.condenser.shell.h_vap_start unit = "J/kg" fixed = true nominal = 1000.0 )  "Specific enthalpy of vapour phase" type: Real
         SteamPowerPlant1.condenser.shell.p_vap:VARIABLE(min = 0.0 start = SteamPowerPlant1.condenser.shell.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer )  "Vapour pressure" type: Real
         SteamPowerPlant1.feedWaterTank.volume.h_liq:VARIABLE(start = SteamPowerPlant1.feedWaterTank.volume.h_liq_start unit = "J/kg" fixed = true nominal = 1000.0 )  "Specific enthalpy of liquid phase" type: Real
         SteamPowerPlant1.feedWaterTank.volume.h_vap:VARIABLE(start = SteamPowerPlant1.feedWaterTank.volume.h_vap_start unit = "J/kg" fixed = true nominal = 1000.0 )  "Specific enthalpy of vapour phase" type: Real
         SteamPowerPlant1.feedWaterTank.volume.p_vap:VARIABLE(min = 0.0 start = SteamPowerPlant1.feedWaterTank.volume.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer )  "Vapour pressure" type: Real
         SteamPowerPlant1.join_IP.h:VARIABLE(start = SteamPowerPlant1.join_IP.h_start unit = "J/kg" fixed = true nominal = 1000.0 )  type: Real
         SteamPowerPlant1.join_IP.p:VARIABLE(min = 0.0 start = SteamPowerPlant1.join_IP.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer )  "System pressure" type: Real
         SteamPowerPlant1.join_LP1.h:VARIABLE(start = SteamPowerPlant1.join_LP1.h_start unit = "J/kg" fixed = true nominal = 1000.0 )  type: Real
         SteamPowerPlant1.join_LP1.p:VARIABLE(min = 0.0 start = SteamPowerPlant1.join_LP1.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer )  "System pressure" type: Real
         SteamPowerPlant1.preheater_HP.tubes.h:VARIABLE(start = SteamPowerPlant1.preheater_HP.tubes.h_start unit = "J/kg" fixed = true nominal = 1000.0 protected = true )  "spec. enthalpy state" type: Real
         SteamPowerPlant1.preheater_HP.shell.h_liq:VARIABLE(start = SteamPowerPlant1.preheater_HP.shell.h_liq_start unit = "J/kg" fixed = true nominal = 1000.0 )  "Specific enthalpy of liquid phase" type: Real
         SteamPowerPlant1.preheater_HP.shell.h_vap:VARIABLE(start = SteamPowerPlant1.preheater_HP.shell.h_vap_start unit = "J/kg" fixed = true nominal = 1000.0 )  "Specific enthalpy of vapour phase" type: Real
         SteamPowerPlant1.preheater_HP.shell.p_vap:VARIABLE(min = 0.0 start = SteamPowerPlant1.preheater_HP.shell.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer )  "Vapour pressure" type: Real
         SteamPowerPlant1.preheater_LP1.tubes.h:VARIABLE(start = SteamPowerPlant1.preheater_LP1.tubes.h_start unit = "J/kg" fixed = true nominal = 1000.0 protected = true )  "spec. enthalpy state" type: Real
         SteamPowerPlant1.preheater_LP1.tubes.p:VARIABLE(min = 0.0 start = SteamPowerPlant1.preheater_LP1.tubes.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer )  "System pressure" type: Real
         SteamPowerPlant1.preheater_LP1.shell.h_liq:VARIABLE(start = SteamPowerPlant1.preheater_LP1.shell.h_liq_start unit = "J/kg" fixed = true nominal = 1000.0 )  "Specific enthalpy of liquid phase" type: Real
         SteamPowerPlant1.preheater_LP1.shell.h_vap:VARIABLE(start = SteamPowerPlant1.preheater_LP1.shell.h_vap_start unit = "J/kg" fixed = true nominal = 1000.0 )  "Specific enthalpy of vapour phase" type: Real
         SteamPowerPlant1.preheater_LP1.shell.p_vap:VARIABLE(min = 0.0 start = SteamPowerPlant1.preheater_LP1.shell.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer )  "Vapour pressure" type: Real
         SteamPowerPlant1.join_LP_main.h:VARIABLE(start = SteamPowerPlant1.join_LP_main.h_start unit = "J/kg" fixed = true nominal = 1000.0 )  type: Real
         SteamPowerPlant1.join_LP_main.p:VARIABLE(min = 0.0 start = SteamPowerPlant1.join_LP_main.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer )  "System pressure" type: Real
         SteamPowerPlant1.PI_preheater1.switch_OnOff.u2:DISCRETE(flow=false fixed = true )  "Connector of Boolean input signal" type: Boolean
         SteamPowerPlant1.PI_Pump_cond.switch_OnOff.u2:DISCRETE(flow=false fixed = true )  "Connector of Boolean input signal" type: Boolean
         SteamPowerPlant1.steamGenerator_1_XRG.heatRelease.x_scaled[2]:VARIABLE(fixed = true protected = true )  "Scaled vector x" type: Real [2]
         SteamPowerPlant2.PI_preheater1.switch_OnOff.u2:DISCRETE(flow=false fixed = true )  "Connector of Boolean input signal" type: Boolean
         SteamPowerPlant2.PI_Pump_cond.switch_OnOff.u2:DISCRETE(flow=false fixed = true )  "Connector of Boolean input signal" type: Boolean
         SteamPowerPlant2.steamGenerator_1_XRG.heatRelease.x_scaled[2]:VARIABLE(fixed = true protected = true )  "Scaled vector x" type: Real [2]
Warning: The initial conditions are over specified. The following 62 initial equations are redundant, so they are removed from the initialization_lambda0 system:
         modelStatistics.heatingPower.E[6] = $START.modelStatistics.heatingPower.E[6]
         modelStatistics.heatingPower.E[4] = $START.modelStatistics.heatingPower.E[4]
         modelStatistics.heatingPower.E[3] = $START.modelStatistics.heatingPower.E[3]
         modelStatistics.heatingPower.E[2] = $START.modelStatistics.heatingPower.E[2]
         modelStatistics.heatingPower.E[1] = $START.modelStatistics.heatingPower.E[1]
         modelStatistics.heatingPower.E[5] = $START.modelStatistics.heatingPower.E[5]
         modelStatistics.electricPower.negPBE[6] = $START.modelStatistics.electricPower.negPBE[6]
         modelStatistics.electricPower.negPBE[5] = $START.modelStatistics.electricPower.negPBE[5]
         modelStatistics.electricPower.negPBE[4] = $START.modelStatistics.electricPower.negPBE[4]
         modelStatistics.electricPower.negPBE[3] = $START.modelStatistics.electricPower.negPBE[3]
         modelStatistics.electricPower.negPBE[2] = $START.modelStatistics.electricPower.negPBE[2]
         modelStatistics.electricPower.negPBE[1] = $START.modelStatistics.electricPower.negPBE[1]
         modelStatistics.electricPower.posPBE[6] = $START.modelStatistics.electricPower.posPBE[6]
         modelStatistics.electricPower.posPBE[5] = $START.modelStatistics.electricPower.posPBE[5]
         modelStatistics.electricPower.posPBE[4] = $START.modelStatistics.electricPower.posPBE[4]
         modelStatistics.electricPower.posPBE[3] = $START.modelStatistics.electricPower.posPBE[3]
         modelStatistics.electricPower.posPBE[2] = $START.modelStatistics.electricPower.posPBE[2]
         modelStatistics.electricPower.posPBE[1] = $START.modelStatistics.electricPower.posPBE[1]
         modelStatistics.electricPower.E[4] = $START.modelStatistics.electricPower.E[4]
         modelStatistics.electricPower.E[3] = $START.modelStatistics.electricPower.E[3]
         modelStatistics.electricPower.E[2] = $START.modelStatistics.electricPower.E[2]
         modelStatistics.electricPower.E[1] = $START.modelStatistics.electricPower.E[1]
         modelStatistics.electricPower.E[6] = $START.modelStatistics.electricPower.E[6]
         modelStatistics.electricPower.E[5] = $START.modelStatistics.electricPower.E[5]
         modelStatistics.gwpEmissions.m_CDE_heat[10] = $START.modelStatistics.gwpEmissions.m_CDE_heat[10]
         modelStatistics.gwpEmissions.m_CDE_heat[8] = $START.modelStatistics.gwpEmissions.m_CDE_heat[8]
         modelStatistics.gwpEmissions.m_CDE_heat[7] = $START.modelStatistics.gwpEmissions.m_CDE_heat[7]
         modelStatistics.gwpEmissions.m_CDE_heat[6] = $START.modelStatistics.gwpEmissions.m_CDE_heat[6]
         modelStatistics.gwpEmissions.m_CDE_heat[5] = $START.modelStatistics.gwpEmissions.m_CDE_heat[5]
         modelStatistics.gwpEmissions.m_CDE_heat[4] = $START.modelStatistics.gwpEmissions.m_CDE_heat[4]
         modelStatistics.gwpEmissions.m_CDE_heat[3] = $START.modelStatistics.gwpEmissions.m_CDE_heat[3]
         modelStatistics.gwpEmissions.m_CDE[9] = $START.modelStatistics.gwpEmissions.m_CDE[9]
         modelStatistics.gwpEmissions.m_CDE[8] = $START.modelStatistics.gwpEmissions.m_CDE[8]
         modelStatistics.gwpEmissions.m_CDE[7] = $START.modelStatistics.gwpEmissions.m_CDE[7]
         modelStatistics.gwpEmissions.m_CDE[6] = $START.modelStatistics.gwpEmissions.m_CDE[6]
         modelStatistics.gwpEmissions.m_CDE[5] = $START.modelStatistics.gwpEmissions.m_CDE[5]
         modelStatistics.gwpEmissions.m_CDE[4] = $START.modelStatistics.gwpEmissions.m_CDE[4]
         modelStatistics.gwpEmissions.m_CDE[3] = $START.modelStatistics.gwpEmissions.m_CDE[3]
         modelStatistics.gwpEmissions.m_CDE[2] = $START.modelStatistics.gwpEmissions.m_CDE[2]
         modelStatistics.gwpEmissions.m_CDE[1] = $START.modelStatistics.gwpEmissions.m_CDE[1]
         modelStatistics.gwpEmissions.m_CDE_heat[9] = $START.modelStatistics.gwpEmissions.m_CDE_heat[9]
         modelStatistics.gwpEmissions.m_CDE_heat[2] = $START.modelStatistics.gwpEmissions.m_CDE_heat[2]
         modelStatistics.gwpEmissions.m_CDE_heat[1] = $START.modelStatistics.gwpEmissions.m_CDE_heat[1]
         modelStatistics.gwpEmissions.m_CDE[14] = $START.modelStatistics.gwpEmissions.m_CDE[14]
         modelStatistics.gwpEmissions.m_CDE[13] = $START.modelStatistics.gwpEmissions.m_CDE[13]
         modelStatistics.gwpEmissions.m_CDE[12] = $START.modelStatistics.gwpEmissions.m_CDE[12]
         modelStatistics.gwpEmissions.m_CDE[11] = $START.modelStatistics.gwpEmissions.m_CDE[11]
         modelStatistics.gwpEmissions.m_CDE[10] = $START.modelStatistics.gwpEmissions.m_CDE[10]
         modelStatistics.electricPower.negSBE[6] = $START.modelStatistics.electricPower.negSBE[6]
         modelStatistics.electricPower.negSBE[5] = $START.modelStatistics.electricPower.negSBE[5]
         modelStatistics.electricPower.negSBE[4] = $START.modelStatistics.electricPower.negSBE[4]
         modelStatistics.electricPower.negSBE[3] = $START.modelStatistics.electricPower.negSBE[3]
         modelStatistics.electricPower.negSBE[2] = $START.modelStatistics.electricPower.negSBE[2]
         modelStatistics.electricPower.negSBE[1] = $START.modelStatistics.electricPower.negSBE[1]
         modelStatistics.electricPower.posSBE[6] = $START.modelStatistics.electricPower.posSBE[6]
         modelStatistics.electricPower.posSBE[5] = $START.modelStatistics.electricPower.posSBE[5]
         modelStatistics.electricPower.posSBE[4] = $START.modelStatistics.electricPower.posSBE[4]
         modelStatistics.electricPower.posSBE[3] = $START.modelStatistics.electricPower.posSBE[3]
         modelStatistics.electricPower.posSBE[2] = $START.modelStatistics.electricPower.posSBE[2]
         modelStatistics.electricPower.posSBE[1] = $START.modelStatistics.electricPower.posSBE[1]
         modelStatistics.electricPower.E_residual_pos = $START.modelStatistics.electricPower.E_residual_pos
         modelStatistics.electricPower.E_residual_neg = $START.modelStatistics.electricPower.E_residual_neg.
Notification: Model statistics after passing the back-end for initialization:
 * Number of independent subsystems: 3029
 * Number of states: 0 ()
 * Number of discrete variables: 98 ($PRE.simCenter.Variable_Ground_Temperature.MSL_combiTimeTable.nextTimeEvent,$whenCondition2,simCenter.Variable_Ground_Temperature.MSL_combiTimeTable.nextTimeEventScaled,$PRE.simCenter.Variable_Ground_Temperature.MSL_combiTimeTable.nextTimeEventScaled,simCenter.Variable_Ground_Temperature.MSL_combiTimeTable.nextTimeEvent,$PRE.simCenter.electricityPrice.MSL_combiTimeTable.nextTimeEvent,$whenCondition1,simCenter.electricityPrice.MSL_combiTimeTable.nextTimeEventScaled,$PRE.simCenter.electricityPrice.MSL_combiTimeTable.nextTimeEventScaled,simCenter.electricityPrice.MSL_combiTimeTable.nextTimeEvent,SteamPowerPlant1.PID_Qfuel.I.local_reset,SteamPowerPlant1.PI_Pump_preheater2.I.local_reset,SteamPowerPlant2.PID_Qfuel.I.local_reset,$PRE.SteamPowerPlant1.PI_preheater1.time_lag_I_activation.entryTime,$PRE.SteamPowerPlant1.PI_preheater1.switch_OnOff.u2,$PRE.SteamPowerPlant1.PI_Pump_cond.time_lag_I_activation.entryTime,$PRE.SteamPowerPlant1.PI_Pump_cond.switch_OnOff.u2,$PRE.SteamPowerPlant2.PI_preheater1.time_lag_I_activation.entryTime,$PRE.SteamPowerPlant2.PI_preheater1.switch_OnOff.u2,$PRE.SteamPowerPlant2.PI_Pump_cond.time_lag_I_activation.entryTime,$PRE.SteamPowerPlant2.PI_Pump_cond.switch_OnOff.u2,SteamPowerPlant1.valve2_HP.pressureLoss.normIsValid,SteamPowerPlant1.valve1_HP.pressureLoss.normIsValid,SteamPowerPlant1.valve_LP1.pressureLoss.normIsValid,SteamPowerPlant2.valve2_HP.pressureLoss.normIsValid,SteamPowerPlant2.valve1_HP.pressureLoss.normIsValid,SteamPowerPlant2.valve_LP1.pressureLoss.normIsValid,SteamPowerPlant1.greaterThreshold1.y,SteamPowerPlant1.and1.y,SteamPowerPlant1.lessThreshold1.y,SteamPowerPlant1.lessThreshold.y,SteamPowerPlant1.greaterThreshold.y,SteamPowerPlant1.PI_preheater1.I_activation.y,SteamPowerPlant1.PI_preheater1.time_lag_I_activation.entryTime,SteamPowerPlant1.PI_preheater1.switch_OnOff.u2,SteamPowerPlant1.preheater_LP1.shell.phaseBorder.table.tableID,SteamPowerPlant1.preheater_HP.shell.phaseBorder.table.tableID,SteamPowerPlant1.PI_Pump_cond.I_activation.y,SteamPowerPlant1.PI_Pump_cond.time_lag_I_activation.entryTime,SteamPowerPlant1.PI_Pump_cond.switch_OnOff.u2,SteamPowerPlant1.feedWaterTank.volume.phaseBorder.table.tableID,SteamPowerPlant1.condenser.shell.phaseBorder.table.tableID,SteamPowerPlant1.steamGenerator_1_XRG.calculateEfficiency.tableID,SteamPowerPlant1.steamGenerator_1_XRG.convert2HPFiring.tableID,SteamPowerPlant1.steamGenerator_1_XRG.convert2PressureDrop_IP.tableID,SteamPowerPlant1.steamGenerator_1_XRG.convert2PressureDrop_HP.tableID,SteamPowerPlant2.greaterThreshold1.y,SteamPowerPlant2.and1.y,SteamPowerPlant2.lessThreshold1.y,SteamPowerPlant2.lessThreshold.y,SteamPowerPlant2.greaterThreshold.y,SteamPowerPlant2.PI_preheater1.I_activation.y,SteamPowerPlant2.PI_preheater1.time_lag_I_activation.entryTime,SteamPowerPlant2.PI_preheater1.switch_OnOff.u2,SteamPowerPlant2.preheater_LP1.shell.phaseBorder.table.tableID,SteamPowerPlant2.preheater_HP.shell.phaseBorder.table.tableID,SteamPowerPlant2.PI_Pump_cond.I_activation.y,SteamPowerPlant2.PI_Pump_cond.time_lag_I_activation.entryTime,SteamPowerPlant2.PI_Pump_cond.switch_OnOff.u2,SteamPowerPlant2.feedWaterTank.volume.phaseBorder.table.tableID,SteamPowerPlant2.condenser.shell.phaseBorder.table.tableID,SteamPowerPlant2.steamGenerator_1_XRG.calculateEfficiency.tableID,SteamPowerPlant2.steamGenerator_1_XRG.convert2HPFiring.tableID,SteamPowerPlant2.steamGenerator_1_XRG.convert2PressureDrop_IP.tableID,SteamPowerPlant2.steamGenerator_1_XRG.convert2PressureDrop_HP.tableID,$whenCondition3,$whenCondition4,$whenCondition5,$whenCondition6,$whenCondition7,$whenCondition8,$whenCondition9,$whenCondition10,SteamPowerPlant2.INIT.valve_LP2.table1.tableID,SteamPowerPlant2.INIT.boiler.table1.tableID,SteamPowerPlant2.INIT.boiler.table2.tableID,SteamPowerPlant2.INIT.valve1_HP.table1.tableID,SteamPowerPlant2.INIT.split1.table.tableID,SteamPowerPlant2.INIT.valve_LP1.table1.tableID,SteamPowerPlant2.NOM.valve_LP2.table1.tableID,SteamPowerPlant2.NOM.boiler.table1.tableID,SteamPowerPlant2.NOM.boiler.table2.tableID,SteamPowerPlant2.NOM.valve1_HP.table1.tableID,SteamPowerPlant2.NOM.split1.table.tableID,SteamPowerPlant2.NOM.valve_LP1.table1.tableID,SteamPowerPlant1.INIT.valve_LP2.table1.tableID,SteamPowerPlant1.INIT.boiler.table1.tableID,SteamPowerPlant1.INIT.boiler.table2.tableID,SteamPowerPlant1.INIT.valve1_HP.table1.tableID,SteamPowerPlant1.INIT.split1.table.tableID,SteamPowerPlant1.INIT.valve_LP1.table1.tableID,SteamPowerPlant1.NOM.valve_LP2.table1.tableID,SteamPowerPlant1.NOM.boiler.table1.tableID,SteamPowerPlant1.NOM.boiler.table2.tableID,SteamPowerPlant1.NOM.valve1_HP.table1.tableID,SteamPowerPlant1.NOM.split1.table.tableID,SteamPowerPlant1.NOM.valve_LP1.table1.tableID,SteamPowerPlant2.PI_Pump_preheater2.I.local_reset)
 * Number of discrete states: 0 ()
 * Number of clocked states: 0 ()
 * Top-level inputs: 0
Notification: Strong component statistics for initialization (8330):
 * Single equations (assignments): 7740
 * Array equations: 0
 * Algorithm blocks: 0
 * Record equations: 524
 * When equations: 0
 * If-equations: 0
 * Equation systems (not torn): 16
 * Torn equation systems: 50
 * Mixed (continuous/discrete) equation systems: 0
Notification: Equation system details (not torn):
 * Constant Jacobian (size): 0 systems
 * Linear Jacobian (size,density): 0 systems
 * Non-linear Jacobian (size): 16 systems
   {1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1}
 * Without analytic Jacobian (size): 0 systems
Notification: Torn system details for strict tearing set:
 * Linear torn systems (#iteration vars, #inner vars, density): 24 systems
   {(4,3,87.5%), (1,1,100.0%), (4,3,87.5%), (1,1,100.0%), (4,3,87.5%), (1,1,100.0%), (4,3,87.5%), (1,1,100.0%), (1,5,100.0%), (1,1,100.0%), (1,1,100.0%), (1,4,100.0%), (1,1,100.0%), (4,3,87.5%), (4,3,87.5%), (1,1,100.0%), (4,3,87.5%), (1,1,100.0%), (4,3,87.5%), (1,1,100.0%), (1,5,100.0%), (1,1,100.0%), (1,1,100.0%), (1,4,100.0%)}
 * Non-linear torn systems (#iteration vars, #inner vars): 26 systems
   {(5,14), (1,6), (1,3), (1,21), (1,12), (5,14), (1,6), (1,2), (1,14), (1,3), (1,2), (1,38), (1,38), (5,14), (1,6), (1,3), (1,21), (1,12), (5,14), (1,6), (1,2), (1,14), (1,3), (1,2), (1,38), (1,38)}
Notification: Performance of prepare postOptimizeDAE: time 0.03586/53.32, allocations: 5.253 MB / 15.46 GB, free: 0.7393 GB / 2.686 GB
Notification: Performance of postOpt lateInlineFunction (simulation): time 0.03533/53.35, allocations: 8.402 MB / 15.47 GB, free: 0.7392 GB / 2.686 GB
Notification: Performance of postOpt wrapFunctionCalls (simulation): time 0.2451/53.6, allocations: 82.21 MB / 15.55 GB, free: 0.7053 GB / 2.686 GB
Notification: Performance of postOpt simplifysemiLinear (simulation): time 0.161/53.76, allocations: 52.75 MB / 15.6 GB, free: 0.6654 GB / 2.686 GB
Notification: Performance of postOpt simplifyComplexFunction (simulation): time 0.005801/53.76, allocations: 1.592 MB / 15.6 GB, free: 0.6639 GB / 2.686 GB
Notification: Performance of postOpt removeConstants (simulation): time 0.07282/53.84, allocations: 23.09 MB / 15.62 GB, free: 0.6441 GB / 2.686 GB
Notification: Performance of postOpt simplifyTimeIndepFuncCalls (simulation): time 0.0365/53.87, allocations: 0.9802 MB / 15.62 GB, free: 0.6431 GB / 2.686 GB
Notification: Performance of postOpt simplifyAllExpressions (simulation): time 0.05716/53.93, allocations: 1.449 MB / 15.62 GB, free: 0.6417 GB / 2.686 GB
Notification: Performance of postOpt findZeroCrossings (simulation): time 0.01583/53.95, allocations: 3.382 MB / 15.63 GB, free: 0.6384 GB / 2.686 GB
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/BackEnd/DAEMode.mo:528:7-530:90:writable] Error: Internal error DAEMode.traverserStrongComponents failed on equation:
1/1 (9): (SteamPowerPlant1.valve1_HP.summary.inlet.steamQuality, SteamPowerPlant1.valve1_HP.fluidIn.cp, SteamPowerPlant1.valve1_HP.fluidIn.cv, SteamPowerPlant1.valve1_HP.fluidIn.beta, SteamPowerPlant1.valve1_HP.fluidIn.kappa, SteamPowerPlant1.valve1_HP.fluidIn.drhodp_hxi, SteamPowerPlant1.valve1_HP.fluidIn.drhodh_pxi, _, SteamPowerPlant1.valve1_HP.fluidIn.w, SteamPowerPlant1.valve1_HP.fluidIn.gamma) = TILMedia.Internals.VLEFluidObjectFunctions.additionalProperties_phxi(SteamPowerPlant1.join_HP.p, SteamPowerPlant1.valve1_HP.summary.inlet.h, {}, SteamPowerPlant1.valve1_HP.fluidIn.vleFluidPointer)

Variables:
1: SteamPowerPlant1.valve1_HP.fluidIn.beta:VARIABLE(unit = "1/K" protected = true )  "Isobaric thermal expansion coefficient" type: Real
2: SteamPowerPlant1.valve1_HP.fluidIn.gamma:VARIABLE(protected = true )  "Heat capacity ratio aka isentropic expansion factor" type: Real
3: SteamPowerPlant1.valve1_HP.fluidIn.drhodh_pxi:VARIABLE(unit = "kg.s2/m5" protected = true )  "1st derivative of density wrt specific enthalpy at constant pressure and mass fraction" type: Real
4: SteamPowerPlant1.valve1_HP.fluidIn.w:VARIABLE(unit = "m/s" protected = true )  "Speed of sound" type: Real
5: SteamPowerPlant1.valve1_HP.fluidIn.drhodp_hxi:VARIABLE(unit = "s2/m2" protected = true )  "1st derivative of density wrt pressure at specific enthalpy and mass fraction" type: Real
6: SteamPowerPlant1.valve1_HP.fluidIn.kappa:VARIABLE(unit = "1/Pa" protected = true )  "Isothermal compressibility" type: Real
7: SteamPowerPlant1.valve1_HP.fluidIn.cp:VARIABLE(unit = "J/(kg.K)" protected = true )  "Specific isobaric heat capacity cp" type: Real
8: SteamPowerPlant1.valve1_HP.summary.inlet.steamQuality:VARIABLE(min = 0.0 max = 1.0 unit = "kg/kg" nominal = 1.0 )  "Steam quality" type: Real
9: SteamPowerPlant1.valve1_HP.fluidIn.cv:VARIABLE(unit = "J/(kg.K)" protected = true )  "Specific isochoric heat capacity cv" type: Real
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/BackEnd/DAEMode.mo:528:7-530:90:writable] Error: Internal error DAEMode.traverserStrongComponents failed on equation:
1/1 (1): SteamPowerPlant1.valve1_HP.summary.inlet.h = if noEvent(SteamPowerPlant1.valve1_HP.summary.outline.opening_ < 0.0) then SteamPowerPlant1.join_HP.h else ClaRa.Basics.Functions.Stepsmoother(10.0, -10.0, SteamPowerPlant1.valve1_HP.pressureLoss.Delta_p) * SteamPowerPlant1.join_HP.h + ClaRa.Basics.Functions.Stepsmoother(-10.0, 10.0, SteamPowerPlant1.valve1_HP.pressureLoss.Delta_p) * SteamPowerPlant1.valve1_HP.inlet.h_outflow
2/2 (1): $cse380 = ClaRa.Basics.Functions.Stepsmoother(SteamPowerPlant1.valve1_HP.fluidIn.VLE.h_v + 1000.0, SteamPowerPlant1.valve1_HP.fluidIn.VLE.h_v, SteamPowerPlant1.valve1_HP.summary.inlet.h)
3/3 (1): SteamPowerPlant1.valve1_HP.iCom.gamma_in = ($cse380 * SteamPowerPlant1.valve1_HP.fluidIn.cp + $cse381 * TILMedia.Internals.VLEFluidConfigurations.FullyMixtureCompatible.VLEFluidObjectFunctions.specificIsobaricHeatCapacity_phxi(SteamPowerPlant1.join_HP.p, SteamPowerPlant1.valve1_HP.fluidIn.VLE.h_v, {}, SteamPowerPlant1.valve1_HP.fluidIn.vleFluidPointer)) / ($cse380 * SteamPowerPlant1.valve1_HP.fluidIn.cv + $cse381 * TILMedia.Internals.VLEFluidConfigurations.FullyMixtureCompatible.VLEFluidObjectFunctions.specificIsochoricHeatCapacity_phxi(SteamPowerPlant1.join_HP.p, SteamPowerPlant1.valve1_HP.fluidIn.VLE.h_v, {}, SteamPowerPlant1.valve1_HP.fluidIn.vleFluidPointer))
4/4 (1): SteamPowerPlant1.valve1_HP.pressureLoss.gamma = if SteamPowerPlant1.valve1_HP.summary.outline.opening_ < 0.0 then SteamPowerPlant1.valve1_HP.iCom.gamma_in else ClaRa.Basics.Functions.Stepsmoother(1000.0, -1000.0, SteamPowerPlant1.valve1_HP.pressureLoss.Delta_p) * SteamPowerPlant1.valve1_HP.iCom.gamma_in + ClaRa.Basics.Functions.Stepsmoother(-1000.0, 1000.0, SteamPowerPlant1.valve1_HP.pressureLoss.Delta_p) * SteamPowerPlant1.valve1_HP.iCom.gamma_out
5/5 (1): SteamPowerPlant1.valve1_HP.iCom.gamma_out = ($cse382 * SteamPowerPlant1.valve1_HP.fluidOut.cp + $cse383 * TILMedia.Internals.VLEFluidConfigurations.FullyMixtureCompatible.VLEFluidObjectFunctions.specificIsobaricHeatCapacity_phxi(SteamPowerPlant1.preheater_HP.shell.fluidIn[1].p, SteamPowerPlant1.valve1_HP.fluidOut.VLE.h_v, {}, SteamPowerPlant1.valve1_HP.fluidOut.vleFluidPointer)) / ($cse382 * SteamPowerPlant1.valve1_HP.fluidOut.cv + $cse383 * TILMedia.Internals.VLEFluidConfigurations.FullyMixtureCompatible.VLEFluidObjectFunctions.specificIsochoricHeatCapacity_phxi(SteamPowerPlant1.preheater_HP.shell.fluidIn[1].p, SteamPowerPlant1.valve1_HP.fluidOut.VLE.h_v, {}, SteamPowerPlant1.valve1_HP.fluidOut.vleFluidPointer))
6/6 (1): $cse383 = ClaRa.Basics.Functions.Stepsmoother(SteamPowerPlant1.valve1_HP.fluidOut.VLE.h_v, SteamPowerPlant1.valve1_HP.fluidOut.VLE.h_v + 1000.0, SteamPowerPlant1.valve1_HP.summary.outlet.h)
7/7 (1): $cse382 = ClaRa.Basics.Functions.Stepsmoother(SteamPowerPlant1.valve1_HP.fluidOut.VLE.h_v + 1000.0, SteamPowerPlant1.valve1_HP.fluidOut.VLE.h_v, SteamPowerPlant1.valve1_HP.summary.outlet.h)
8/8 (1): SteamPowerPlant1.valve1_HP.pressureLoss.p_in = max(SteamPowerPlant1.join_HP.p, SteamPowerPlant1.preheater_HP.shell.fluidIn[1].p)
9/9 (1): SteamPowerPlant1.valve1_HP.pressureLoss.Delta_p_ = min(abs(SteamPowerPlant1.valve1_HP.pressureLoss.Delta_p) / SteamPowerPlant1.valve1_HP.pressureLoss.p_in, SteamPowerPlant1.valve1_HP.pressureLoss.x_TChoked)
10/10 (1): $cse298 = min(abs(SteamPowerPlant1.valve1_HP.pressureLoss.Delta_p), abs(SteamPowerPlant1.valve1_HP.pressureLoss.x_TChoked * SteamPowerPlant1.valve1_HP.pressureLoss.p_in))
11/11 (1): SteamPowerPlant1.valve1_HP.pressureLoss.Delta_p_actual = /*Real*/(sign(SteamPowerPlant1.valve1_HP.pressureLoss.Delta_p)) * $cse298
12/12 (1): $cse297 = ClaRa.Basics.Functions.ThermoRoot(SteamPowerPlant1.valve1_HP.pressureLoss.Delta_p_actual, SteamPowerPlant1.valve1_HP.pressureLoss.Delta_p_eps)
13/13 (1): SteamPowerPlant1.quadruple11.m_flow = 2.777777777777778e-5 * SteamPowerPlant1.valve1_HP.pressureLoss.Kv * SteamPowerPlant1.valve1_HP.pressureLoss.F_P * SteamPowerPlant1.valve1_HP.pressureLoss.Y * $cse297 * sqrt(max(1e-15, SteamPowerPlant1.valve1_HP.iCom.rho_in))
14/14 (1): SteamPowerPlant1.valve1_HP.pressureLoss.Y = min(1.0, $cse299)
15/15 (1): $cse299 = max(0.6666666666666666, 1.0 - SteamPowerPlant1.valve1_HP.pressureLoss.Delta_p_ / (3.0 * SteamPowerPlant1.valve1_HP.pressureLoss.x_TChoked))
16/16 (1): SteamPowerPlant1.valve1_HP.pressureLoss.x_TChoked = SteamPowerPlant1.valve1_HP.pressureLoss.F_gamma * SteamPowerPlant1.valve1_HP.pressureLoss.x_TP
17/17 (1): SteamPowerPlant1.valve1_HP.pressureLoss.F_gamma = 0.7142857142857143 * SteamPowerPlant1.valve1_HP.pressureLoss.gamma
18/18 (1): SteamPowerPlant1.preheater_HP.shell.summary.outline.Delta_p = SteamPowerPlant1.preheater_HP.shell.fluidIn[1].p - SteamPowerPlant1.statePoint_XRG1.p
19/19 (1): 0.0 = SteamPowerPlant1.preheater_HP.shell.pressureLoss.Delta_p[1] + SteamPowerPlant1.preheater_HP.shell.phaseBorder.Delta_p_geo_in[1] + (-SteamPowerPlant1.preheater_HP.shell.phaseBorder.Delta_p_geo_out[1]) - SteamPowerPlant1.preheater_HP.shell.summary.outline.Delta_p
20/20 (1): SteamPowerPlant1.quadruple11.m_flow = semiLinear(SteamPowerPlant1.preheater_HP.shell.pressureLoss.Delta_p[1] / SteamPowerPlant1.preheater_HP.shell.pressureLoss.Delta_p_nom[1], 1.0, SteamPowerPlant1.preheater_HP.shell.pressureLoss.CF_backflow) * SteamPowerPlant1.preheater_HP.shell.iCom.m_flow_nom
21/21 (10): (SteamPowerPlant1.valve1_HP.fluidOut.VLE.d_l, SteamPowerPlant1.valve1_HP.fluidOut.VLE.h_l, SteamPowerPlant1.valve1_HP.fluidOut.VLE.p_l, SteamPowerPlant1.valve1_HP.fluidOut.VLE.s_l, SteamPowerPlant1.valve1_HP.fluidOut.VLE.T_l, _, SteamPowerPlant1.valve1_HP.fluidOut.VLE.d_v, SteamPowerPlant1.valve1_HP.fluidOut.VLE.h_v, SteamPowerPlant1.valve1_HP.fluidOut.VLE.p_v, SteamPowerPlant1.valve1_HP.fluidOut.VLE.s_v, SteamPowerPlant1.valve1_HP.fluidOut.VLE.T_v, _) = TILMedia.Internals.VLEFluidObjectFunctions.VLEProperties_phxi(SteamPowerPlant1.preheater_HP.shell.fluidIn[1].p, -1.0, {}, SteamPowerPlant1.valve1_HP.fluidOut.vleFluidPointer)
22/31 (9): (SteamPowerPlant1.valve1_HP.summary.outlet.steamQuality, SteamPowerPlant1.valve1_HP.fluidOut.cp, SteamPowerPlant1.valve1_HP.fluidOut.cv, SteamPowerPlant1.valve1_HP.fluidOut.beta, SteamPowerPlant1.valve1_HP.fluidOut.kappa, SteamPowerPlant1.valve1_HP.fluidOut.drhodp_hxi, SteamPowerPlant1.valve1_HP.fluidOut.drhodh_pxi, _, SteamPowerPlant1.valve1_HP.fluidOut.w, SteamPowerPlant1.valve1_HP.fluidOut.gamma) = TILMedia.Internals.VLEFluidObjectFunctions.additionalProperties_phxi(SteamPowerPlant1.preheater_HP.shell.fluidIn[1].p, SteamPowerPlant1.valve1_HP.summary.outlet.h, {}, SteamPowerPlant1.valve1_HP.fluidOut.vleFluidPointer)
23/40 (1): SteamPowerPlant1.valve1_HP.summary.outlet.rho = TILMedia.Internals.VLEFluidConfigurations.FullyMixtureCompatible.VLEFluidObjectFunctions.density_phxi(SteamPowerPlant1.preheater_HP.shell.fluidIn[1].p, SteamPowerPlant1.valve1_HP.summary.outlet.h, {}, SteamPowerPlant1.valve1_HP.fluidOut.vleFluidPointer)
24/41 (1): SteamPowerPlant1.valve1_HP.iCom.rho_in = if noEvent(SteamPowerPlant1.valve1_HP.summary.outline.opening_ < 0.0) then SteamPowerPlant1.valve1_HP.summary.inlet.rho else ClaRa.Basics.Functions.Stepsmoother(10.0, -10.0, SteamPowerPlant1.valve1_HP.pressureLoss.Delta_p) * SteamPowerPlant1.valve1_HP.summary.inlet.rho + ClaRa.Basics.Functions.Stepsmoother(-10.0, 10.0, SteamPowerPlant1.valve1_HP.pressureLoss.Delta_p) * SteamPowerPlant1.valve1_HP.summary.outlet.rho
25/42 (1): SteamPowerPlant1.valve1_HP.pressureLoss.Delta_p = SteamPowerPlant1.join_HP.p - SteamPowerPlant1.preheater_HP.shell.fluidIn[1].p
26/43 (1): SteamPowerPlant1.valve1_HP.summary.outlet.h = if noEvent(SteamPowerPlant1.valve1_HP.summary.outline.opening_ < 0.0) then SteamPowerPlant1.join_HP.h else ClaRa.Basics.Functions.Stepsmoother(10.0, -10.0, SteamPowerPlant1.valve1_HP.pressureLoss.Delta_p) * SteamPowerPlant1.join_HP.h + ClaRa.Basics.Functions.Stepsmoother(-10.0, 10.0, SteamPowerPlant1.valve1_HP.pressureLoss.Delta_p) * SteamPowerPlant1.valve1_HP.inlet.h_outflow
27/44 (1): $cse381 = ClaRa.Basics.Functions.Stepsmoother(SteamPowerPlant1.valve1_HP.fluidIn.VLE.h_v, SteamPowerPlant1.valve1_HP.fluidIn.VLE.h_v + 1000.0, SteamPowerPlant1.valve1_HP.summary.inlet.h)
28/45 (9): (SteamPowerPlant1.valve1_HP.summary.inlet.steamQuality, SteamPowerPlant1.valve1_HP.fluidIn.cp, SteamPowerPlant1.valve1_HP.fluidIn.cv, SteamPowerPlant1.valve1_HP.fluidIn.beta, SteamPowerPlant1.valve1_HP.fluidIn.kappa, SteamPowerPlant1.valve1_HP.fluidIn.drhodp_hxi, SteamPowerPlant1.valve1_HP.fluidIn.drhodh_pxi, _, SteamPowerPlant1.valve1_HP.fluidIn.w, SteamPowerPlant1.valve1_HP.fluidIn.gamma) = TILMedia.Internals.VLEFluidObjectFunctions.additionalProperties_phxi(SteamPowerPlant1.join_HP.p, SteamPowerPlant1.valve1_HP.summary.inlet.h, {}, SteamPowerPlant1.valve1_HP.fluidIn.vleFluidPointer)
29/54 (1): SteamPowerPlant1.valve1_HP.summary.inlet.rho = TILMedia.Internals.VLEFluidConfigurations.FullyMixtureCompatible.VLEFluidObjectFunctions.density_phxi(SteamPowerPlant1.join_HP.p, SteamPowerPlant1.valve1_HP.summary.inlet.h, {}, SteamPowerPlant1.valve1_HP.fluidIn.vleFluidPointer)

Variables:
1: SteamPowerPlant1.valve1_HP.summary.inlet.rho:VARIABLE(min = 0.0 unit = "kg/m3" nominal = 1000.0 )  "Density" type: Real
2: SteamPowerPlant1.valve1_HP.fluidIn.beta:VARIABLE(unit = "1/K" protected = true )  "Isobaric thermal expansion coefficient" type: Real
3: SteamPowerPlant1.valve1_HP.fluidIn.gamma:VARIABLE(protected = true )  "Heat capacity ratio aka isentropic expansion factor" type: Real
4: SteamPowerPlant1.valve1_HP.fluidIn.drhodh_pxi:VARIABLE(unit = "kg.s2/m5" protected = true )  "1st derivative of density wrt specific enthalpy at constant pressure and mass fraction" type: Real
5: SteamPowerPlant1.valve1_HP.fluidIn.w:VARIABLE(unit = "m/s" protected = true )  "Speed of sound" type: Real
6: SteamPowerPlant1.valve1_HP.fluidIn.drhodp_hxi:VARIABLE(unit = "s2/m2" protected = true )  "1st derivative of density wrt pressure at specific enthalpy and mass fraction" type: Real
7: SteamPowerPlant1.valve1_HP.fluidIn.kappa:VARIABLE(unit = "1/Pa" protected = true )  "Isothermal compressibility" type: Real
8: SteamPowerPlant1.valve1_HP.fluidIn.cp:VARIABLE(unit = "J/(kg.K)" protected = true )  "Specific isobaric heat capacity cp" type: Real
9: SteamPowerPlant1.valve1_HP.summary.inlet.steamQuality:VARIABLE(min = 0.0 max = 1.0 unit = "kg/kg" nominal = 1.0 )  "Steam quality" type: Real
10: SteamPowerPlant1.valve1_HP.fluidIn.cv:VARIABLE(unit = "J/(kg.K)" protected = true )  "Specific isochoric heat capacity cv" type: Real
11: $cse381:VARIABLE(protected = true )  type: Real unreplaceable
12: SteamPowerPlant1.valve1_HP.summary.outlet.h:VARIABLE(unit = "J/kg" nominal = 1000.0 )  "Specific enthalpy" type: Real
13: SteamPowerPlant1.valve1_HP.pressureLoss.Delta_p:VARIABLE(unit = "Pa" nominal = 1e5 )  "Pressure difference p_in - p_out" type: Real
14: SteamPowerPlant1.valve1_HP.iCom.rho_in:VARIABLE(min = 0.0 start = 1.0 unit = "kg/m3" nominal = 1000.0 protected = true )  "Inlet density" type: Real
15: SteamPowerPlant1.valve1_HP.summary.outlet.rho:VARIABLE(min = 0.0 unit = "kg/m3" nominal = 1000.0 )  "Density" type: Real
16: SteamPowerPlant1.valve1_HP.fluidOut.beta:VARIABLE(unit = "1/K" protected = true )  "Isobaric thermal expansion coefficient" type: Real
17: SteamPowerPlant1.valve1_HP.fluidOut.w:VARIABLE(unit = "m/s" protected = true )  "Speed of sound" type: Real
18: SteamPowerPlant1.valve1_HP.summary.outlet.steamQuality:VARIABLE(min = 0.0 max = 1.0 unit = "kg/kg" nominal = 1.0 )  "Steam quality" type: Real
19: SteamPowerPlant1.valve1_HP.fluidOut.cp:VARIABLE(unit = "J/(kg.K)" protected = true )  "Specific isobaric heat capacity cp" type: Real
20: SteamPowerPlant1.valve1_HP.fluidOut.drhodp_hxi:VARIABLE(unit = "s2/m2" protected = true )  "1st derivative of density wrt pressure at specific enthalpy and mass fraction" type: Real
21: SteamPowerPlant1.valve1_HP.fluidOut.drhodh_pxi:VARIABLE(unit = "kg.s2/m5" protected = true )  "1st derivative of density wrt specific enthalpy at constant pressure and mass fraction" type: Real
22: SteamPowerPlant1.valve1_HP.fluidOut.kappa:VARIABLE(unit = "1/Pa" protected = true )  "Isothermal compressibility" type: Real
23: SteamPowerPlant1.valve1_HP.fluidOut.gamma:VARIABLE(protected = true )  "Heat capacity ratio aka isentropic expansion factor" type: Real
24: SteamPowerPlant1.valve1_HP.fluidOut.cv:VARIABLE(unit = "J/(kg.K)" protected = true )  "Specific isochoric heat capacity cv" type: Real
25: SteamPowerPlant1.valve1_HP.fluidOut.VLE.p_l:VARIABLE(min = 0.0 unit = "Pa" nominal = 1e5 protected = true )  "Pressure of liquid phase" type: Real
26: SteamPowerPlant1.valve1_HP.fluidOut.VLE.d_v:VARIABLE(min = 0.0 unit = "kg/m3" protected = true )  "Density of vapour phase" type: Real
27: SteamPowerPlant1.valve1_HP.fluidOut.VLE.T_v:VARIABLE(min = 0.0 start = 288.15 unit = "K" nominal = 300.0 protected = true )  "Temperature of vapour phase" type: Real
28: SteamPowerPlant1.valve1_HP.fluidOut.VLE.h_l:VARIABLE(unit = "J/kg" protected = true )  "Specific enthalpy of liquid phase" type: Real
29: SteamPowerPlant1.valve1_HP.fluidOut.VLE.s_v:VARIABLE(unit = "J/(kg.K)" protected = true )  "Specific entropy of vapour phase" type: Real
30: SteamPowerPlant1.valve1_HP.fluidOut.VLE.T_l:VARIABLE(min = 0.0 start = 288.15 unit = "K" nominal = 300.0 protected = true )  "Temperature of liquid phase" type: Real
31: SteamPowerPlant1.valve1_HP.fluidOut.VLE.s_l:VARIABLE(unit = "J/(kg.K)" protected = true )  "Specific entropy of liquid phase" type: Real
32: SteamPowerPlant1.valve1_HP.fluidOut.VLE.d_l:VARIABLE(min = 0.0 unit = "kg/m3" protected = true )  "Density of liquid phase" type: Real
33: SteamPowerPlant1.valve1_HP.fluidOut.VLE.p_v:VARIABLE(min = 0.0 unit = "Pa" nominal = 1e5 protected = true )  "Pressure of vapour phase" type: Real
34: SteamPowerPlant1.quadruple11.m_flow:VARIABLE(nominal = 1.0 )  "Mass flow rate" type: Real
35: SteamPowerPlant1.preheater_HP.shell.pressureLoss.Delta_p[1]:VARIABLE(start = 1.0 unit = "Pa" nominal = 1e5 )  "Pressure difference du to friction" type: Real [3]
36: SteamPowerPlant1.preheater_HP.shell.summary.outline.Delta_p:VARIABLE(unit = "Pa" nominal = 1e5 )  "Pressure difference p_in - p_out" type: Real
37: SteamPowerPlant1.valve1_HP.pressureLoss.gamma:VARIABLE()  "Heat capacity ratio at actual inlet" type: Real
38: SteamPowerPlant1.valve1_HP.pressureLoss.F_gamma:VARIABLE(protected = true )  "Normalising factor for heat capacity ratio" type: Real
39: SteamPowerPlant1.valve1_HP.pressureLoss.Delta_p_:VARIABLE(protected = true )  "(p_inlet-p_outlet)/p_inlet; naming in DIN EN 60534: x" type: Real
40: $cse299:VARIABLE(protected = true )  type: Real unreplaceable
41: SteamPowerPlant1.valve1_HP.pressureLoss.Y:VARIABLE()  "Expansion factor" type: Real
42: $cse297:VARIABLE(protected = true )  type: Real unreplaceable
43: SteamPowerPlant1.valve1_HP.pressureLoss.Delta_p_actual:VARIABLE(min = 0.0 unit = "Pa" nominal = 1e5 protected = true )  "Actual pressure difference with respect to choking flow" type: Real
44: $cse298:VARIABLE(protected = true )  type: Real unreplaceable
45: SteamPowerPlant1.valve1_HP.pressureLoss.x_TChoked:VARIABLE(protected = true )  "Pressure ratio at which choking of flow occurs" type: Real
46: SteamPowerPlant1.valve1_HP.pressureLoss.p_in:VARIABLE(min = 0.0 unit = "Pa" nominal = 1e5 protected = true )  type: Real
47: SteamPowerPlant1.preheater_HP.shell.fluidIn[1].p:VARIABLE(min = 0.0 unit = "Pa" nominal = 1e5 final = true )  "Pressure" type: Real [3]
48: $cse382:VARIABLE(protected = true )  type: Real unreplaceable
49: SteamPowerPlant1.valve1_HP.fluidOut.VLE.h_v:VARIABLE(unit = "J/kg" protected = true )  "Specific enthalpy of vapour phase" type: Real
50: $cse383:VARIABLE(protected = true )  type: Real unreplaceable
51: SteamPowerPlant1.valve1_HP.iCom.gamma_out:VARIABLE(start = 2.0 protected = true )  "Heat capacity ratio at outlet" type: Real
52: SteamPowerPlant1.valve1_HP.iCom.gamma_in:VARIABLE(start = 2.0 protected = true )  "Heat capacity ratio at inlet" type: Real
53: $cse380:VARIABLE(protected = true )  type: Real unreplaceable
54: SteamPowerPlant1.valve1_HP.summary.inlet.h:VARIABLE(unit = "J/kg" nominal = 1000.0 )  "Specific enthalpy" type: Real
[/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/Compiler/BackEnd/BackendDAEUtil.mo:9805:5-9806:77:writable] Error: Internal error BackendDAEUtil.traverseEqSystemStrongComponents failed with function:
omc_DAEMode_traverserStrongComponents
Notification: Performance of <failed> postOpt createDAEmodeBDAE (simulation): time 0.0244/53.97, allocations: 72.56 MB / 15.7 GB, free: 0.5666 GB / 2.686 GB
Error: post-optimization module createDAEmodeBDAE (simulation) failed.
Error: Internal error SimCode DAEmode: The model TransiEnt.Producer.Electrical.Conventional.Components.Check.TestDetailedSteamPowerPlant could not be translated