Environment - simulationEnvironment:
startTime=0
stopTime=3.1536e+07
tolerance=1e-06
numberOfIntervals=2500
stepSize=12614.4
Regular simulation: ./BuildingSystems_BuildingSystems.Applications.SolarThermalSystems.SolarThermalSystem2  -abortSlowSimulation -alarm=480 -lv LOG_STATS
LOG_STDOUT        | warning | Internal Numerical Jacobians without coloring are currently not supported by IDA with KLU. Colored numerical Jacobian will be used.
LOG_STDOUT        | info    | ... loading "tab1" from "/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Climate/weather/Egypt_ElGouna.txt"
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:417:3-426:39:writable]
|                 | |       | The following assertion has been violated during initialization at time 0.000000
|                 | |       | ((not (pump1.per.etaHydMet == BuildingSystems.Fluid.Movers.BaseClasses.Types.HydraulicEfficiencyMethod.Power_VolumeFlowRate or pump1.per.etaHydMet == BuildingSystems.Fluid.Movers.BaseClasses.Types.HydraulicEfficiencyMethod.EulerNumber))) --> "*** Warning in SolarThermalSystem2.pump1: Mover has per.etaHydMet=.Power_VolumeFlowRate or per.etaHydMet=.EulerNumber.
|                 | |       | This requires per.pressure to be provided.
|                 | |       | Because it is not, the model overrides this setting by using per.etaHydMet=.NotProvided."
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:428:3-437:39:writable]
|                 | |       | The following assertion has been violated during initialization at time 0.000000
|                 | |       | ((pump1.per.haveWMot_nominal or not (pump1.per.etaMotMet == BuildingSystems.Fluid.Movers.BaseClasses.Types.MotorEfficiencyMethod.Efficiency_MotorPartLoadRatio or pump1.per.etaMotMet == BuildingSystems.Fluid.Movers.BaseClasses.Types.MotorEfficiencyMethod.GenericCurve))) --> "*** Warning in SolarThermalSystem2.pump1: Mover has per.etaMotMet=.Efficiency_MotorPartLoadRatio or per.etaMotMet=.GenericCurve.
|                 | |       | This requires per.WMot_nominal or per.pressure to be provided. Because neither is provided,
|                 | |       | the model overrides this setting and by using per.etaMotMet=.NotProvided."
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:417:3-426:39:writable]
|                 | |       | The following assertion has been violated during initialization at time 0.000000
|                 | |       | ((not (pump2.per.etaHydMet == BuildingSystems.Fluid.Movers.BaseClasses.Types.HydraulicEfficiencyMethod.Power_VolumeFlowRate or pump2.per.etaHydMet == BuildingSystems.Fluid.Movers.BaseClasses.Types.HydraulicEfficiencyMethod.EulerNumber))) --> "*** Warning in SolarThermalSystem2.pump2: Mover has per.etaHydMet=.Power_VolumeFlowRate or per.etaHydMet=.EulerNumber.
|                 | |       | This requires per.pressure to be provided.
|                 | |       | Because it is not, the model overrides this setting by using per.etaHydMet=.NotProvided."
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:428:3-437:39:writable]
|                 | |       | The following assertion has been violated during initialization at time 0.000000
|                 | |       | ((pump2.per.haveWMot_nominal or not (pump2.per.etaMotMet == BuildingSystems.Fluid.Movers.BaseClasses.Types.MotorEfficiencyMethod.Efficiency_MotorPartLoadRatio or pump2.per.etaMotMet == BuildingSystems.Fluid.Movers.BaseClasses.Types.MotorEfficiencyMethod.GenericCurve))) --> "*** Warning in SolarThermalSystem2.pump2: Mover has per.etaMotMet=.Efficiency_MotorPartLoadRatio or per.etaMotMet=.GenericCurve.
|                 | |       | This requires per.WMot_nominal or per.pressure to be provided. Because neither is provided,
|                 | |       | the model overrides this setting and by using per.etaMotMet=.NotProvided."
LOG_SUCCESS       | info    | The initialization finished successfully without homotopy method.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 26321.043076
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.4 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 26321.043076
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.4 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 26321.043076
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.4 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 26321.043076
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.4 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 26992.281609
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.7 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 26992.281609
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.7 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 26992.281609
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.7 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 26992.281609
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.7 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 27609.354286
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.5 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 27609.354286
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.5 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 27609.354286
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.5 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 27609.354286
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.5 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 28159.534012
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.6 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 28159.534012
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.6 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 28159.534012
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.6 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 28159.534012
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.6 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 28663.113064
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.7 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 28663.113064
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.7 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 28663.113064
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.7 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 28663.113064
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.7 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 29131.236924
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 29131.236924
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 29131.236924
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 29131.236924
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 29571.262993
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 29571.262993
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 29571.262993
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 29571.262993
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 29988.316620
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.1 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 29988.316620
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.1 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 29988.316620
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.1 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 29988.316620
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.1 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 30386.162572
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.2 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 30386.162572
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.2 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 30386.162572
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.2 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 30386.162572
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.2 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 30767.631086
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.4 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 30767.631086
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.4 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 30767.631086
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.4 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 30767.631086
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.4 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 31134.791953
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.5 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 31134.791953
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.5 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 31134.791953
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.5 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 31134.791953
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.5 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 31489.192521
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.6 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 31489.192521
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.6 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 31489.192521
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.6 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 31489.192521
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.6 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 31832.227126
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.7 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 31832.227126
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.7 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 31832.227126
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.7 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 31832.227126
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.7 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 32165.115372
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 32165.115372
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 32165.115372
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 32165.115372
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.