Running: ./testmodel.py --libraries=/home/hudson/saved_omc/libraries/.openmodelica/libraries --ompython_omhome=/usr ClaRa_ClaRa.Examples.SteamCycle_02.conf.json loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-main/package.mo", uses=false) loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.0.0+maint.om/package.mo", uses=false) loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.0.0+maint.om/package.mo", uses=false) loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.0.0+maint.om/package.mo", uses=false) loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/package.mo", uses=false) Using package ClaRa with version 1.8.1 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/package.mo) Using package Modelica with version 4.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.0.0+maint.om/package.mo) Using package Complex with version 4.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.0.0+maint.om/package.mo) Using package ModelicaServices with version 4.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.0.0+maint.om/package.mo) Using package TILMedia with version 1.8.1 ClaRa (/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-main/package.mo) Running command: translateModel(ClaRa.Examples.SteamCycle_02,tolerance=1e-05,outputFormat="mat",numberOfIntervals=5000,variableFilter="Pump_FW.outlet.h_outflow|Pump_cond.outlet.h_outflow|Pump_preheater_LP1.outlet.h_outflow|Pump_preheater_LP3.outlet.h_outflow|Time|Turbine_HP1.outlet.h_outflow|Turbine_IP1.outlet.h_outflow|Turbine_IP2.outlet.h_outflow|Turbine_IP3.outlet.h_outflow|Turbine_LP1.outlet.h_outflow|Turbine_LP2.outlet.h_outflow|Turbine_LP3.outlet.h_outflow|Turbine_LP4.outlet.h_outflow|condenser.shell.outlet.1..h_outflow|condenser.shell.summary.outline.Q_flow_tot|condenser.tubes.outlet.h_outflow|condenser.tubes.summary.outline.Q_flow_tot|downComer_feedWaterTank.outlet.h_outflow|downComer_feedWaterTank.summary.outline.Q_flow_tot|feedWaterTank.volume.outlet.1..h_outflow|feedWaterTank.volume.outlet.2..h_outflow|feedWaterTank.volume.summary.outline.Q_flow_tot|join_HP.outlet1.h_outflow|join_HP.outlet2.h_outflow|join_IP3.outlet1.h_outflow|join_IP3.outlet2.h_outflow|join_LP1.outlet1.h_outflow|join_LP1.outlet2.h_outflow|join_LP2.outlet1.h_outflow|join_LP2.outlet2.h_outflow|join_LP3.outlet1.h_outflow|join_LP3.outlet2.h_outflow|join_LP_main.outlet.h_outflow|join_preheater_LP3.outlet.h_outflow|preheater_HP.shell.outlet.1..h_outflow|preheater_HP.shell.summary.outline.Q_flow_tot|preheater_HP.tubes.outlet.h_outflow|preheater_HP.tubes.summary.outline.Q_flow_tot|preheater_LP1.shell.outlet.1..h_outflow|preheater_LP1.shell.summary.outline.Q_flow_tot|preheater_LP1.tubes.outlet.h_outflow|preheater_LP1.tubes.summary.outline.Q_flow_tot|preheater_LP2.shell.outlet.1..h_outflow|preheater_LP2.shell.summary.outline.Q_flow_tot|preheater_LP2.tubes.outlet.h_outflow|preheater_LP2.tubes.summary.outline.Q_flow_tot|preheater_LP3.shell.outlet.1..h_outflow|preheater_LP3.shell.summary.outline.Q_flow_tot|preheater_LP3.tubes.outlet.h_outflow|preheater_LP3.tubes.summary.outline.Q_flow_tot|preheater_LP4.shell.outlet.1..h_outflow|preheater_LP4.shell.summary.outline.Q_flow_tot|preheater_LP4.tubes.outlet.h_outflow|preheater_LP4.tubes.summary.outline.Q_flow_tot|split_IP2.outlet1.h_outflow|split_IP2.outlet2.h_outflow|steamGenerator.reheat_out.h_outflow|valveControl_preheater_HP.outlet.h_outflow|valveControl_preheater_LP1.outlet.h_outflow|valveControl_preheater_LP2.outlet.h_outflow|valveControl_preheater_LP4.outlet.h_outflow|valvePreFeedWaterTank.outlet.h_outflow|valve_HP.outlet.h_outflow|valve_IP1.outlet.h_outflow|valve_IP3.outlet.h_outflow|valve_LP2.outlet.h_outflow|valve_LP3.outlet.h_outflow|valve_LP4.outlet.h_outflow|valve_afterPumpLP3.outlet.h_outflow",fileNamePrefix="ClaRa_ClaRa.Examples.SteamCycle_02") translateModel(ClaRa.Examples.SteamCycle_02,tolerance=1e-05,outputFormat="mat",numberOfIntervals=5000,variableFilter="Pump_FW.outlet.h_outflow|Pump_cond.outlet.h_outflow|Pump_preheater_LP1.outlet.h_outflow|Pump_preheater_LP3.outlet.h_outflow|Time|Turbine_HP1.outlet.h_outflow|Turbine_IP1.outlet.h_outflow|Turbine_IP2.outlet.h_outflow|Turbine_IP3.outlet.h_outflow|Turbine_LP1.outlet.h_outflow|Turbine_LP2.outlet.h_outflow|Turbine_LP3.outlet.h_outflow|Turbine_LP4.outlet.h_outflow|condenser.shell.outlet.1..h_outflow|condenser.shell.summary.outline.Q_flow_tot|condenser.tubes.outlet.h_outflow|condenser.tubes.summary.outline.Q_flow_tot|downComer_feedWaterTank.outlet.h_outflow|downComer_feedWaterTank.summary.outline.Q_flow_tot|feedWaterTank.volume.outlet.1..h_outflow|feedWaterTank.volume.outlet.2..h_outflow|feedWaterTank.volume.summary.outline.Q_flow_tot|join_HP.outlet1.h_outflow|join_HP.outlet2.h_outflow|join_IP3.outlet1.h_outflow|join_IP3.outlet2.h_outflow|join_LP1.outlet1.h_outflow|join_LP1.outlet2.h_outflow|join_LP2.outlet1.h_outflow|join_LP2.outlet2.h_outflow|join_LP3.outlet1.h_outflow|join_LP3.outlet2.h_outflow|join_LP_main.outlet.h_outflow|join_preheater_LP3.outlet.h_outflow|preheater_HP.shell.outlet.1..h_outflow|preheater_HP.shell.summary.outline.Q_flow_tot|preheater_HP.tubes.outlet.h_outflow|preheater_HP.tubes.summary.outline.Q_flow_tot|preheater_LP1.shell.outlet.1..h_outflow|preheater_LP1.shell.summary.outline.Q_flow_tot|preheater_LP1.tubes.outlet.h_outflow|preheater_LP1.tubes.summary.outline.Q_flow_tot|preheater_LP2.shell.outlet.1..h_outflow|preheater_LP2.shell.summary.outline.Q_flow_tot|preheater_LP2.tubes.outlet.h_outflow|preheater_LP2.tubes.summary.outline.Q_flow_tot|preheater_LP3.shell.outlet.1..h_outflow|preheater_LP3.shell.summary.outline.Q_flow_tot|preheater_LP3.tubes.outlet.h_outflow|preheater_LP3.tubes.summary.outline.Q_flow_tot|preheater_LP4.shell.outlet.1..h_outflow|preheater_LP4.shell.summary.outline.Q_flow_tot|preheater_LP4.tubes.outlet.h_outflow|preheater_LP4.tubes.summary.outline.Q_flow_tot|split_IP2.outlet1.h_outflow|split_IP2.outlet2.h_outflow|steamGenerator.reheat_out.h_outflow|valveControl_preheater_HP.outlet.h_outflow|valveControl_preheater_LP1.outlet.h_outflow|valveControl_preheater_LP2.outlet.h_outflow|valveControl_preheater_LP4.outlet.h_outflow|valvePreFeedWaterTank.outlet.h_outflow|valve_HP.outlet.h_outflow|valve_IP1.outlet.h_outflow|valve_IP3.outlet.h_outflow|valve_LP2.outlet.h_outflow|valve_LP3.outlet.h_outflow|valve_LP4.outlet.h_outflow|valve_afterPumpLP3.outlet.h_outflow",fileNamePrefix="ClaRa_ClaRa.Examples.SteamCycle_02") Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-main/package.mo): time 0.1208/0.1208, allocations: 22.37 MB / 38 MB, free: 1.633 MB / 26.18 MB Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.0.0+maint.om/package.mo): time 0.001037/0.001038, allocations: 114.2 kB / 45.17 MB, free: 3.977 MB / 34.91 MB Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.0.0+maint.om/package.mo): time 0.001198/0.001198, allocations: 178.2 kB / 52.44 MB, free: 8.34 MB / 46.55 MB Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.0.0+maint.om/package.mo): time 1.375/1.375, allocations: 222.9 MB / 282.5 MB, free: 2.465 MB / 206.1 MB [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Control/PredictorModels_3508/Check/package.mo:2:1-21:10:writable] Warning: The package.order file contains a class TestReheater, which is expected to be stored in file TestReheater.mo, but seems to be named testReheater.mo. Proceeding since only the case of the names are different. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Control/PredictorModels_3508/Check/testReheater.mo:2:1-117:17:writable] Warning: Expected the package to have name testReheater, but got TestReheater. Proceeding since only the case of the names are different. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/package.mo:2:1-23:10:writable] Warning: PhysicalMills was referenced in the package.order file, but was not found in package.mo, PhysicalMills/package.mo or PhysicalMills.mo. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/package.mo:2:1-22:18:writable] Warning: Expected the package to have name physicalMills, but got PhysicalMills. Proceeding since only the case of the names are different. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/package.mo:2:1-22:18:writable] Warning: The package.order file contains a class Mill_L4_advancedInit, which is expected to be stored in file Mill_L4_advancedInit.mo, but seems to be named mill_L4_advancedInit.mo. Proceeding since only the case of the names are different. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/package.mo:2:1-22:18:writable] Warning: The package.order file contains a class Mill_L4, which is expected to be stored in file Mill_L4.mo, but seems to be named mill_L4.mo. Proceeding since only the case of the names are different. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/mill_L4_advancedInit.mo:2:1-58:25:writable] Warning: Expected the package to have name mill_L4_advancedInit, but got Mill_L4_advancedInit. Proceeding since only the case of the names are different. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/mill_L4_advancedInit.mo:2:1-58:25:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills; but got within ClaRa.Components.Mills.PhysicalMills; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/mill_L4.mo:2:1-315:12:writable] Warning: Expected the package to have name mill_L4, but got Mill_L4. Proceeding since only the case of the names are different. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/mill_L4.mo:2:1-315:12:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills; but got within ClaRa.Components.Mills.PhysicalMills; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/package.mo:2:1-21:10:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills; but got within ClaRa.Components.Mills.PhysicalMills; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/package.mo:2:1-21:10:writable] Warning: The package.order file contains a class TestMillBox_2, which is expected to be stored in file TestMillBox_2.mo, but seems to be named testMillBox_2.mo. Proceeding since only the case of the names are different. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/package.mo:2:1-21:10:writable] Warning: The package.order file contains a class TestMillBox_1_measurementInput, which is expected to be stored in file TestMillBox_1_measurementInput.mo, but seems to be named testMillBox_1_measurementInput.mo. Proceeding since only the case of the names are different. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/package.mo:2:1-21:10:writable] Warning: The package.order file contains a class TestMillBox_1, which is expected to be stored in file TestMillBox_1.mo, but seems to be named testMillBox_1.mo. Proceeding since only the case of the names are different. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/testMillBox_2.mo:2:1-297:18:writable] Warning: Expected the package to have name testMillBox_2, but got TestMillBox_2. Proceeding since only the case of the names are different. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/testMillBox_2.mo:2:1-297:18:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Check; but got within ClaRa.Components.Mills.PhysicalMills.Check; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/testMillBox_1_measurementInput.mo:2:1-1342:35:writable] Warning: Expected the package to have name testMillBox_1_measurementInput, but got TestMillBox_1_measurementInput. Proceeding since only the case of the names are different. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/testMillBox_1_measurementInput.mo:2:1-1342:35:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Check; but got within ClaRa.Components.Mills.PhysicalMills.Check; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/testMillBox_1.mo:2:1-465:18:writable] Warning: Expected the package to have name testMillBox_1, but got TestMillBox_1. Proceeding since only the case of the names are different. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/testMillBox_1.mo:2:1-465:18:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Check; but got within ClaRa.Components.Mills.PhysicalMills.Check; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/package.mo:2:1-29:12:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills; but got within ClaRa.Components.Mills.PhysicalMills; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/FlowClassifier.mo:2:1-346:19:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/CentrifugalClassifier.mo:2:1-380:26:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/GrinderRingRoller.mo:2:1-294:22:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/FuelJoin_distributed.mo:2:1-133:25:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Dryer.mo:2:1-301:10:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/package.mo:2:1-20:17:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/package.mo:2:1-20:13:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Transport_Velocity/package.mo:2:1-20:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Transport_Velocity/Transport_complex.mo:2:1-71:22:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Transport_Velocity/Transport_constant.mo:2:1-49:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Transport_Velocity/Transport_base.mo:2:1-52:19:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Selection_Function/package.mo:2:1-20:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Selection_Function/Selection_Kersting.mo:2:1-80:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Selection_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Selection_Function; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Selection_Function/Selection_Steinmetz.mo:2:1-104:24:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Selection_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Selection_Function; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Selection_Function/Selection_constant.mo:2:1-45:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Selection_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Selection_Function; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Selection_Function/Selection_base.mo:2:1-50:19:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Selection_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Selection_Function; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Breakage_Function/package.mo:2:1-20:22:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Breakage_Function/Breakage_Austin.mo:2:1-109:20:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Breakage_Function/Breakage_Steinmetz.mo:2:1-106:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Breakage_Function/Breakage_constant.mo:2:1-45:22:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Breakage_Function/Breakage_base.mo:2:1-51:18:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Drying/package.mo:2:1-20:11:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Drying/Drying_ideal.mo:2:1-58:17:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Drying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Drying; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Drying/Drying_base.mo:2:1-44:16:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Drying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Drying; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Classifying/package.mo:2:1-20:16:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Classifying/Classifying_flow.mo:2:1-111:21:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Classifying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Classifying; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Classifying/Classifying_centrifugal.mo:2:1-153:28:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Classifying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Classifying; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Classifying/Classifying_centrifugal_base.mo:2:1-45:33:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Classifying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Classifying; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Classifying/Classifying_flow_base.mo:2:1-45:26:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Classifying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Classifying; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/package.mo:2:1-20:12:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/iCom_Dryer.mo:2:1-57:15:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/iCom_FlowClassifier.mo:2:1-67:24:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/iCom_CentrifugalClassifier.mo:2:1-69:31:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/iCom_Grinder.mo:2:1-61:17:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/FuelClassification_example_21classes.mo:2:1-43:41:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/GeometricProgression.mo:2:1-56:25:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/FuelClassification_generic.mo:2:1-43:31:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/FuelClassification_example_05classes.mo:2:1-43:41:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/FuelClassification_example_11classes.mo:2:1-43:41:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/FuelClassification_base.mo:2:1-61:28:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/package.mo:2:1-23:10:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/package.mo:2:1-23:10:writable] Warning: The package.order file contains a class TestFuelJoin, which is expected to be stored in file TestFuelJoin.mo, but seems to be named testFuelJoin.mo. Proceeding since only the case of the names are different. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/package.mo:2:1-23:10:writable] Warning: The package.order file contains a class TestAerosolVolume, which is expected to be stored in file TestAerosolVolume.mo, but seems to be named testAerosolVolume.mo. Proceeding since only the case of the names are different. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/package.mo:2:1-23:10:writable] Warning: The package.order file contains a class TestDryer, which is expected to be stored in file TestDryer.mo, but seems to be named testDryer.mo. Proceeding since only the case of the names are different. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/package.mo:2:1-23:10:writable] Warning: The package.order file contains a class TestGrinder, which is expected to be stored in file TestGrinder.mo, but seems to be named testGrinder.mo. Proceeding since only the case of the names are different. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testFuelJoin.mo:2:1-93:17:writable] Warning: Expected the package to have name testFuelJoin, but got TestFuelJoin. Proceeding since only the case of the names are different. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testFuelJoin.mo:2:1-93:17:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Check; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Check; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testAerosolVolume.mo:2:1-176:22:writable] Warning: Expected the package to have name testAerosolVolume, but got TestAerosolVolume. Proceeding since only the case of the names are different. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testAerosolVolume.mo:2:1-176:22:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Check; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Check; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testDryer.mo:2:1-93:14:writable] Warning: Expected the package to have name testDryer, but got TestDryer. Proceeding since only the case of the names are different. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testDryer.mo:2:1-93:14:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Check; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Check; (ignoring the potential error; the class might have been inserted at an unexpected location). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testGrinder.mo:2:1-154:16:writable] Warning: Expected the package to have name testGrinder, but got TestGrinder. Proceeding since only the case of the names are different. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testGrinder.mo:2:1-154:16:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Check; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Check; (ignoring the potential error; the class might have been inserted at an unexpected location). Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/package.mo): time 0.84/0.84, allocations: 126.8 MB / 465.8 MB, free: 12.41 MB / 366.1 MB Notification: Performance of FrontEnd - loaded program: time 0.001675/0.001675, allocations: 91.86 kB / 0.6282 GB, free: 1.086 MB / 446.1 MB Notification: Performance of FrontEnd - Absyn->SCode: time 0.1466/0.1483, allocations: 81.78 MB / 0.708 GB, free: 15.31 MB / 0.5294 GB Notification: Performance of NFInst.instantiate(ClaRa.Examples.SteamCycle_02): time 0.5723/0.7207, allocations: 279.5 MB / 0.981 GB, free: 13.54 MB / 0.7482 GB Notification: Performance of NFInst.instExpressions: time 0.684/1.405, allocations: 116.8 MB / 1.095 GB, free: 2.688 MB / 0.8263 GB Notification: Performance of NFInst.updateImplicitVariability: time 0.07279/1.478, allocations: 1.315 MB / 1.096 GB, free: 2.688 MB / 0.8263 GB [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Basics/Interfaces/CycleSumModel.mo:3:3-3:52:writable] Warning: Connector cycleSumPort is not balanced: The number of potential variables (0) is not equal to the number of flow variables (4). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/StaticCycles/Triple.mo:32:3-32:182:writable] Warning: Connector steamSignal is not balanced: The number of potential variables (3) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Basics/Interfaces/CycleSumModel.mo:3:3-3:52:writable] Warning: Connector cycleSumPort is not balanced: The number of potential variables (0) is not equal to the number of flow variables (4). Notification: Performance of NFTyping.typeComponents: time 0.06859/1.546, allocations: 28.18 MB / 1.124 GB, free: 2.199 MB / 0.8263 GB [/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-main/VLEFluidFunctions.mo:177:13-181:19:writable] Warning: Pure function 'TILMedia.Internals.VLEFluidConfigurations.FullyMixtureCompatible.VLEFluidFunctions.density_phxi' contains a call to impure function 'TILMedia.Internals.VLEFluidFunctions.density_phxi'. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-main/VLEFluidFunctions.mo:787:13-791:33:writable] Warning: Pure function 'TILMedia.Internals.VLEFluidConfigurations.FullyMixtureCompatible.VLEFluidFunctions.bubbleSpecificEnthalpy_pxi' contains a call to impure function 'TILMedia.Internals.VLEFluidFunctions.bubbleSpecificEnthalpy_pxi'. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-main/VLEFluidFunctions.mo:782:13-786:30:writable] Warning: Pure function 'TILMedia.Internals.VLEFluidConfigurations.FullyMixtureCompatible.VLEFluidFunctions.dewSpecificEnthalpy_pxi' contains a call to impure function 'TILMedia.Internals.VLEFluidFunctions.dewSpecificEnthalpy_pxi'. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-main/VLEFluidFunctions.mo:202:13-206:40:writable] Warning: Pure function 'TILMedia.Internals.VLEFluidConfigurations.FullyMixtureCompatible.VLEFluidFunctions.specificIsobaricHeatCapacity_phxi' contains a call to impure function 'TILMedia.Internals.VLEFluidFunctions.specificIsobaricHeatCapacity_phxi'. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-main/VLEFluidFunctions.mo:257:13-261:28:writable] Warning: Pure function 'TILMedia.Internals.VLEFluidConfigurations.FullyMixtureCompatible.VLEFluidFunctions.dynamicViscosity_phxi' contains a call to impure function 'TILMedia.Internals.VLEFluidFunctions.dynamicViscosity_phxi'. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-main/VLEFluidFunctions.mo:252:13-256:31:writable] Warning: Pure function 'TILMedia.Internals.VLEFluidConfigurations.FullyMixtureCompatible.VLEFluidFunctions.thermalConductivity_phxi' contains a call to impure function 'TILMedia.Internals.VLEFluidFunctions.thermalConductivity_phxi'. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-main/VLEFluidFunctions.mo:777:13-781:24:writable] Warning: Pure function 'TILMedia.Internals.VLEFluidConfigurations.FullyMixtureCompatible.VLEFluidFunctions.bubbleDensity_pxi' contains a call to impure function 'TILMedia.Internals.VLEFluidFunctions.bubbleDensity_pxi'. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-main/VLEFluidFunctions.mo:772:13-776:21:writable] Warning: Pure function 'TILMedia.Internals.VLEFluidConfigurations.FullyMixtureCompatible.VLEFluidFunctions.dewDensity_pxi' contains a call to impure function 'TILMedia.Internals.VLEFluidFunctions.dewDensity_pxi'. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-main/VLEFluidFunctions.mo:519:13-523:19:writable] Warning: Pure function 'TILMedia.Internals.VLEFluidConfigurations.FullyMixtureCompatible.VLEFluidFunctions.density_pTxi' contains a call to impure function 'TILMedia.Internals.VLEFluidFunctions.density_pTxi'. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-main/VLEFluidFunctions.mo:524:13-528:28:writable] Warning: Pure function 'TILMedia.Internals.VLEFluidConfigurations.FullyMixtureCompatible.VLEFluidFunctions.specificEnthalpy_pTxi' contains a call to impure function 'TILMedia.Internals.VLEFluidFunctions.specificEnthalpy_pTxi'. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-main/VLEFluidFunctions.mo:353:13-357:28:writable] Warning: Pure function 'TILMedia.Internals.VLEFluidConfigurations.FullyMixtureCompatible.VLEFluidFunctions.specificEnthalpy_psxi' contains a call to impure function 'TILMedia.Internals.VLEFluidFunctions.specificEnthalpy_psxi'. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-main/VLEFluidFunctions.mo:182:13-186:27:writable] Warning: Pure function 'TILMedia.Internals.VLEFluidConfigurations.FullyMixtureCompatible.VLEFluidFunctions.specificEntropy_phxi' contains a call to impure function 'TILMedia.Internals.VLEFluidFunctions.specificEntropy_phxi'. Notification: Performance of NFTyping.typeBindings: time 0.1222/1.668, allocations: 46.28 MB / 1.169 GB, free: 8.176 MB / 0.8419 GB Notification: Performance of NFTyping.typeClassSections: time 0.09809/1.766, allocations: 42.61 MB / 1.211 GB, free: 6.508 MB / 0.8575 GB Notification: Performance of NFFlatten.flatten: time 0.1995/1.966, allocations: 145 MB / 1.352 GB, free: 6.488 MB / 0.9825 GB Notification: Performance of NFFlatten.resolveConnections: time 0.1139/2.08, allocations: 59.25 MB / 1.41 GB, free: 12.07 MB / 1.045 GB Notification: Performance of NFEvalConstants.evaluate: time 1.211/3.291, allocations: 60.17 MB / 1.469 GB, free: 58.86 MB / 1.076 GB Notification: Performance of NFSimplifyModel.simplify: time 0.08841/3.379, allocations: 57.06 MB / 1.525 GB, free: 53.79 MB / 1.076 GB Notification: Performance of NFPackage.collectConstants: time 0.03859/3.418, allocations: 10.25 MB / 1.535 GB, free: 53.79 MB / 1.076 GB Notification: Performance of NFFlatten.collectFunctions: time 0.05713/3.475, allocations: 13.67 MB / 1.548 GB, free: 53.79 MB / 1.076 GB Notification: Performance of NFScalarize.scalarize: time 0.04894/3.524, allocations: 31.26 MB / 1.579 GB, free: 49.97 MB / 1.076 GB Notification: Performance of NFVerifyModel.verify: time 0.09842/3.623, allocations: 53.08 MB / 1.63 GB, free: 34.71 MB / 1.076 GB Notification: Performance of NFConvertDAE.convert: time 0.2186/3.841, allocations: 148.8 MB / 1.776 GB, free: 15.61 MB / 1.139 GB Notification: Performance of FrontEnd - DAE generated: time 8.927e-06/3.841, allocations: 0 / 1.776 GB, free: 15.61 MB / 1.139 GB Notification: Performance of FrontEnd: time 1.973e-06/3.841, allocations: 2.156 kB / 1.776 GB, free: 15.61 MB / 1.139 GB Notification: Performance of Transformations before backend: time 0.00563/3.847, allocations: 0 / 1.776 GB, free: 15.61 MB / 1.139 GB Notification: Model statistics after passing the front-end and creating the data structures used by the back-end: * Number of equations: 17710 * Number of variables: 17710 Notification: Performance of Generate backend data structure: time 0.2908/4.138, allocations: 102.8 MB / 1.876 GB, free: 9.098 MB / 1.233 GB Notification: Performance of prepare preOptimizeDAE: time 5.297e-05/4.138, allocations: 8.031 kB / 1.876 GB, free: 9.09 MB / 1.233 GB Notification: Performance of preOpt normalInlineFunction (simulation): time 1.002/5.139, allocations: 11.68 MB / 1.888 GB, free: 485.5 MB / 1.233 GB Notification: Performance of preOpt evaluateParameters (simulation): time 0.2099/5.349, allocations: 78.11 MB / 1.964 GB, free: 460.9 MB / 1.233 GB Notification: Performance of preOpt simplifyIfEquations (simulation): time 0.004244/5.354, allocations: 3.802 MB / 1.968 GB, free: 459.2 MB / 1.233 GB Notification: Performance of preOpt expandDerOperator (simulation): time 0.01939/5.373, allocations: 4.793 MB / 1.972 GB, free: 457.6 MB / 1.233 GB Notification: Performance of preOpt clockPartitioning (simulation): time 0.2093/5.582, allocations: 100.1 MB / 2.07 GB, free: 381.3 MB / 1.233 GB Notification: Performance of preOpt findStateOrder (simulation): time 0.00357/5.586, allocations: 0.5975 MB / 2.071 GB, free: 380.9 MB / 1.233 GB Notification: Performance of preOpt replaceEdgeChange (simulation): time 0.01978/5.606, allocations: 2.441 MB / 2.073 GB, free: 379.4 MB / 1.233 GB Notification: Performance of preOpt inlineArrayEqn (simulation): time 0.007347/5.613, allocations: 4.445 MB / 2.077 GB, free: 378.3 MB / 1.233 GB Notification: Performance of preOpt removeEqualRHS (simulation): time 0.1524/5.766, allocations: 67.14 MB / 2.143 GB, free: 319.3 MB / 1.233 GB Warning: The model contains alias variables with redundant start and/or conflicting nominal values. It is recommended to resolve the conflicts, because otherwise the system could be hard to solve. To print the conflicting alias sets and the chosen candidates please use -d=aliasConflicts. Notification: Performance of preOpt removeSimpleEquations (simulation): time 1.828/7.594, allocations: 0.532 GB / 2.675 GB, free: 184.7 MB / 1.358 GB Notification: Performance of preOpt comSubExp (simulation): time 0.1024/7.697, allocations: 68.53 MB / 2.742 GB, free: 158.7 MB / 1.358 GB Notification: Performance of preOpt resolveLoops (simulation): time 0.06492/7.761, allocations: 36 MB / 2.777 GB, free: 138.9 MB / 1.358 GB Notification: Performance of preOpt evalFunc (simulation): time 0.01268/7.774, allocations: 2.866 MB / 2.78 GB, free: 137.8 MB / 1.358 GB Notification: Performance of preOpt encapsulateWhenConditions (simulation): time 0.09824/7.872, allocations: 57.24 MB / 2.836 GB, free: 115 MB / 1.374 GB Notification: Performance of preOpt simplifyInStream (simulation): time 0.04126/7.914, allocations: 6.624 MB / 2.842 GB, free: 113 MB / 1.374 GB Notification: Performance of pre-optimization done (n=8756): time 0.0002434/7.914, allocations: 4 kB / 2.842 GB, free: 113 MB / 1.374 GB Notification: Performance of matching and sorting (n=8779): time 30.99/38.9, allocations: 8.055 GB / 10.9 GB, free: 380.4 MB / 1.374 GB Notification: Performance of inlineWhenForInitialization (initialization): time 0.00464/38.91, allocations: 24.24 MB / 10.92 GB, free: 351.4 MB / 1.374 GB Notification: Performance of selectInitializationVariablesDAE (initialization): time 0.1698/39.08, allocations: 74.29 MB / 10.99 GB, free: 314.6 MB / 1.374 GB Notification: Performance of collectPreVariables (initialization): time 0.01193/39.09, allocations: 0.8646 MB / 10.99 GB, free: 313.7 MB / 1.374 GB Notification: Performance of collectInitialEqns (initialization): time 0.03687/39.12, allocations: 34.8 MB / 11.03 GB, free: 282.2 MB / 1.374 GB Notification: Performance of collectInitialBindings (initialization): time 0.6221/39.75, allocations: 29.24 MB / 11.06 GB, free: 0.5355 GB / 1.374 GB Notification: Performance of simplifyInitialFunctions (initialization): time 0.07447/39.82, allocations: 20.32 MB / 11.08 GB, free: 0.5337 GB / 1.374 GB Notification: Performance of setup shared object (initialization): time 4.157e-05/39.82, allocations: 302.9 kB / 11.08 GB, free: 0.5334 GB / 1.374 GB Notification: Performance of preBalanceInitialSystem (initialization): time 0.08211/39.9, allocations: 38.42 MB / 11.11 GB, free: 0.5262 GB / 1.374 GB Notification: Performance of partitionIndependentBlocks (initialization): time 0.09329/40, allocations: 60.46 MB / 11.17 GB, free: 492.3 MB / 1.374 GB Error: Initialization problem is structural singular. Please, check the initial conditions. Notification: Performance of analyzeInitialSystem (initialization): time 3.3/43.3, allocations: 0.498 GB / 11.67 GB, free: 401.9 MB / 1.374 GB Notification: Performance of solveInitialSystemEqSystem (initialization): time 0.001076/43.3, allocations: 224 kB / 11.67 GB, free: 401.7 MB / 1.374 GB Notification: Performance of matching and sorting (n=14589) (initialization): time 0.3144/43.61, allocations: 115.8 MB / 11.79 GB, free: 289.9 MB / 1.374 GB Notification: Performance of prepare postOptimizeDAE: time 0.001689/43.61, allocations: 369.7 kB / 11.79 GB, free: 289.5 MB / 1.374 GB Notification: Performance of postOpt simplifyComplexFunction (initialization): time 0.006839/43.62, allocations: 2.591 MB / 11.79 GB, free: 286.9 MB / 1.374 GB Notification: Performance of postOpt tearingSystem (initialization): time 0.2684/43.89, allocations: 32.15 MB / 11.82 GB, free: 254.7 MB / 1.374 GB Notification: Performance of postOpt solveSimpleEquations (initialization): time 0.0653/43.95, allocations: 16.05 MB / 11.84 GB, free: 238.6 MB / 1.374 GB Notification: Performance of postOpt calculateStrongComponentJacobians (initialization): time 0.7471/44.7, allocations: 132 MB / 11.96 GB, free: 420.9 MB / 1.374 GB Notification: Performance of postOpt simplifyAllExpressions (initialization): time 0.07609/44.78, allocations: 3.062 MB / 11.97 GB, free: 420.9 MB / 1.374 GB Notification: Performance of postOpt collapseArrayExpressions (initialization): time 0.01973/44.8, allocations: 4.143 MB / 11.97 GB, free: 420.9 MB / 1.374 GB Warning: Assuming fixed start value for the following 77 variables: inertia.phi:VARIABLE(start = 0.0 unit = "rad" fixed = true ) "Absolute rotation angle of component" type: Real steamGenerator.h_IP:VARIABLE(start = steamGenerator.h_RH_start unit = "J/kg" fixed = true nominal = 1000.0 ) "Specific enthalpy before IP injector" type: Real steamGenerator.p_IP:VARIABLE(min = 0.0 start = steamGenerator.p_RH_start unit = "Pa" fixed = true nominal = 1e5 ) "Pressure at hot reheat outlet" type: Real steamGenerator.h_HP:VARIABLE(start = steamGenerator.h_LS_start unit = "J/kg" fixed = true nominal = 1000.0 ) "Specific enthalpy before HP injector" type: Real steamGenerator.p_HP:VARIABLE(min = 0.0 start = steamGenerator.p_LS_start unit = "Pa" fixed = true nominal = 1e5 ) "Live steam pressure" type: Real condenser.wall.nTU.T_w_i[1]:VARIABLE(min = 0.0 start = 288.15 unit = "K" fixed = true nominal = 300.0 protected = true ) "Wall temperature at inner phase" type: Real [3] condenser.wall.nTU.T_w_o[3]:VARIABLE(min = 0.0 start = condenser.wall.nTU.T_w_o_start[3] unit = "K" fixed = true nominal = 300.0 protected = true ) "Wall temperature at outer phase" type: Real [3] condenser.wall.PI_2ph.outputI:VARIABLE(start = 0.0 fixed = true protected = true ) type: Real condenser.wall.PI_1ph_in.outputI:VARIABLE(start = 0.0 fixed = true protected = true ) type: Real condenser.tubes.h:VARIABLE(start = condenser.tubes.h_start unit = "J/kg" fixed = true nominal = 1000.0 protected = true ) "spec. enthalpy state" type: Real condenser.tubes.p:VARIABLE(min = 0.0 start = condenser.tubes.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer ) "System pressure" type: Real condenser.shell.h_liq:VARIABLE(start = condenser.shell.h_liq_start unit = "J/kg" fixed = true nominal = 1000.0 ) "Specific enthalpy of liquid phase" type: Real condenser.shell.h_vap:VARIABLE(start = condenser.shell.h_vap_start unit = "J/kg" fixed = true nominal = 1000.0 ) "Specific enthalpy of vapour phase" type: Real condenser.shell.p_vap:VARIABLE(min = 0.0 start = condenser.shell.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer ) "Vapour pressure" type: Real feedWaterTank.volume.h_liq:VARIABLE(start = feedWaterTank.volume.h_liq_start unit = "J/kg" fixed = true nominal = 1000.0 ) "Specific enthalpy of liquid phase" type: Real feedWaterTank.volume.h_vap:VARIABLE(start = feedWaterTank.volume.h_vap_start unit = "J/kg" fixed = true nominal = 1000.0 ) "Specific enthalpy of vapour phase" type: Real feedWaterTank.volume.p_vap:VARIABLE(min = 0.0 start = feedWaterTank.volume.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer ) "Vapour pressure" type: Real join_LP1.h:VARIABLE(start = join_LP1.h_start unit = "J/kg" fixed = true nominal = 1000.0 ) type: Real join_LP1.p:VARIABLE(min = 0.0 start = join_LP1.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer ) "System pressure" type: Real join_HP.h:VARIABLE(start = join_HP.h_start unit = "J/kg" fixed = true nominal = 1000.0 ) type: Real join_HP.p:VARIABLE(min = 0.0 start = Turbine_HP1.p_out_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer ) "System pressure" type: Real preheater_HP.tubes.h:VARIABLE(start = preheater_HP.tubes.h_start unit = "J/kg" fixed = true nominal = 1000.0 protected = true ) "spec. enthalpy state" type: Real preheater_HP.tubes.p:VARIABLE(min = 0.0 start = preheater_HP.tubes.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer ) "System pressure" type: Real preheater_HP.shell.h_liq:VARIABLE(start = preheater_HP.shell.h_liq_start unit = "J/kg" fixed = true nominal = 1000.0 ) "Specific enthalpy of liquid phase" type: Real preheater_HP.shell.h_vap:VARIABLE(start = preheater_HP.shell.h_vap_start unit = "J/kg" fixed = true nominal = 1000.0 ) "Specific enthalpy of vapour phase" type: Real preheater_HP.shell.p_vap:VARIABLE(min = 0.0 start = preheater_HP.shell.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer ) "Vapour pressure" type: Real preheater_HP.wall.nTU.T_w_i[3]:VARIABLE(min = 0.0 start = preheater_HP.wall.nTU.T_w_i_start[3] unit = "K" fixed = true protected = true ) "Wall temperature at inner phase" type: Real [3] preheater_HP.wall.nTU.T_w_o[1]:VARIABLE(min = 0.0 start = preheater_HP.wall.nTU.T_w_o_start[1] unit = "K" fixed = true protected = true ) "Wall temperature at outer phase" type: Real [3] preheater_HP.wall.PI_2ph.outputI:VARIABLE(start = 0.0 fixed = true protected = true ) type: Real preheater_HP.wall.PI_1ph_in.outputI:VARIABLE(start = 0.0 fixed = true protected = true ) type: Real preheater_LP1.tubes.h:VARIABLE(start = preheater_LP1.tubes.h_start unit = "J/kg" fixed = true nominal = 1000.0 protected = true ) "spec. enthalpy state" type: Real preheater_LP1.tubes.p:VARIABLE(min = 0.0 start = preheater_LP1.tubes.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer ) "System pressure" type: Real preheater_LP1.shell.h_liq:VARIABLE(start = preheater_LP1.shell.h_liq_start unit = "J/kg" fixed = true nominal = 1000.0 ) "Specific enthalpy of liquid phase" type: Real preheater_LP1.shell.h_vap:VARIABLE(start = preheater_LP1.shell.h_vap_start unit = "J/kg" fixed = true nominal = 1000.0 ) "Specific enthalpy of vapour phase" type: Real preheater_LP1.shell.p_vap:VARIABLE(min = 0.0 start = preheater_LP1.shell.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer ) "Vapour pressure" type: Real preheater_LP1.wall.nTU.T_w_i[3]:VARIABLE(min = 0.0 start = preheater_LP1.wall.nTU.T_w_i_start[3] unit = "K" fixed = true protected = true ) "Wall temperature at inner phase" type: Real [3] preheater_LP1.wall.nTU.T_w_o[1]:VARIABLE(min = 0.0 start = preheater_LP1.wall.nTU.T_w_o_start[1] unit = "K" fixed = true protected = true ) "Wall temperature at outer phase" type: Real [3] preheater_LP1.wall.PI_2ph.outputI:VARIABLE(start = 0.0 fixed = true protected = true ) type: Real preheater_LP1.wall.PI_1ph_in.outputI:VARIABLE(start = 0.0 fixed = true protected = true ) type: Real join_LP_main.h:VARIABLE(start = join_LP_main.h_start unit = "J/kg" fixed = true nominal = 1000.0 ) type: Real join_LP_main.p:VARIABLE(min = 0.0 start = join_LP_main.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer ) "System pressure" type: Real split_IP2.h:VARIABLE(start = split_IP2.h_start unit = "J/kg" fixed = true nominal = 1000.0 ) type: Real split_IP2.p:VARIABLE(min = 0.0 start = split_IP2.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer ) "System pressure" type: Real join_IP3.h:VARIABLE(start = join_IP3.h_start unit = "J/kg" fixed = true nominal = 1000.0 ) type: Real join_IP3.p:VARIABLE(min = 0.0 start = join_IP3.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer ) "System pressure" type: Real join_LP2.h:VARIABLE(start = join_LP2.h_start unit = "J/kg" fixed = true nominal = 1000.0 ) type: Real join_LP2.p:VARIABLE(min = 0.0 start = join_LP2.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer ) "System pressure" type: Real join_LP3.h:VARIABLE(start = join_LP3.h_start unit = "J/kg" fixed = true nominal = 1000.0 ) type: Real join_LP3.p:VARIABLE(min = 0.0 start = join_LP3.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer ) "System pressure" type: Real preheater_LP2.shell.h_liq:VARIABLE(start = preheater_LP2.shell.h_liq_start unit = "J/kg" fixed = true nominal = 1000.0 ) "Specific enthalpy of liquid phase" type: Real preheater_LP2.shell.h_vap:VARIABLE(start = preheater_LP2.shell.h_vap_start unit = "J/kg" fixed = true nominal = 1000.0 ) "Specific enthalpy of vapour phase" type: Real preheater_LP2.shell.p_vap:VARIABLE(min = 0.0 start = preheater_LP2.shell.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer ) "Vapour pressure" type: Real preheater_LP3.tubes.h:VARIABLE(start = preheater_LP3.tubes.h_start unit = "J/kg" fixed = true nominal = 1000.0 protected = true ) "spec. enthalpy state" type: Real preheater_LP3.tubes.p:VARIABLE(min = 0.0 start = preheater_LP3.tubes.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer ) "System pressure" type: Real preheater_LP3.shell.h_liq:VARIABLE(start = preheater_LP3.shell.h_liq_start unit = "J/kg" fixed = true nominal = 1000.0 ) "Specific enthalpy of liquid phase" type: Real preheater_LP3.shell.h_vap:VARIABLE(start = preheater_LP3.shell.h_vap_start unit = "J/kg" fixed = true nominal = 1000.0 ) "Specific enthalpy of vapour phase" type: Real preheater_LP3.shell.p_vap:VARIABLE(min = 0.0 start = preheater_LP3.shell.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer ) "Vapour pressure" type: Real preheater_LP4.tubes.h:VARIABLE(start = preheater_LP4.tubes.h_start unit = "J/kg" fixed = true nominal = 1000.0 protected = true ) "spec. enthalpy state" type: Real preheater_LP4.tubes.p:VARIABLE(min = 0.0 start = preheater_LP4.tubes.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer ) "System pressure" type: Real preheater_LP4.shell.h_liq:VARIABLE(start = preheater_LP4.shell.h_liq_start unit = "J/kg" fixed = true nominal = 1000.0 ) "Specific enthalpy of liquid phase" type: Real preheater_LP4.shell.h_vap:VARIABLE(start = preheater_LP4.shell.h_vap_start unit = "J/kg" fixed = true nominal = 1000.0 ) "Specific enthalpy of vapour phase" type: Real preheater_LP4.shell.p_vap:VARIABLE(min = 0.0 start = preheater_LP4.shell.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer ) "Vapour pressure" type: Real preheater_LP4.wall.nTU.T_w_i[3]:VARIABLE(min = 0.0 start = preheater_LP4.wall.nTU.T_w_i_start[3] unit = "K" fixed = true protected = true ) "Wall temperature at inner phase" type: Real [3] preheater_LP4.wall.nTU.T_w_o[1]:VARIABLE(min = 0.0 start = preheater_LP4.wall.nTU.T_w_o_start[1] unit = "K" fixed = true protected = true ) "Wall temperature at outer phase" type: Real [3] join_preheater_LP3.h:VARIABLE(start = join_preheater_LP3.h_start unit = "J/kg" fixed = true nominal = 1000.0 ) type: Real join_preheater_LP3.p:VARIABLE(min = 0.0 start = join_preheater_LP3.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer ) "System pressure" type: Real downComer_feedWaterTank.h[1]:VARIABLE(start = downComer_feedWaterTank.mechanicalEquilibrium.h_start[1] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true ) "Cell enthalpy" type: Real [3] downComer_feedWaterTank.h[2]:VARIABLE(start = downComer_feedWaterTank.mechanicalEquilibrium.h_start[2] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true ) "Cell enthalpy" type: Real [3] downComer_feedWaterTank.p[1]:VARIABLE(min = 0.0 start = downComer_feedWaterTank.p_start_internal[1] unit = "Pa" fixed = true nominal = 1e5 protected = true ) "Cell pressure" type: Real [3] downComer_feedWaterTank.p[2]:VARIABLE(min = 0.0 start = downComer_feedWaterTank.p_start_internal[2] unit = "Pa" fixed = true nominal = 1e5 protected = true ) "Cell pressure" type: Real [3] PI_Pump_cond.switch_OnOff.u2:DISCRETE(flow=false fixed = true ) "Connector of Boolean input signal" type: Boolean PID_NDVW3.switch_OnOff.u2:DISCRETE(flow=false fixed = true ) "Connector of Boolean input signal" type: Boolean PID_preheaterLP3.switch_OnOff.u2:DISCRETE(flow=false fixed = true ) "Connector of Boolean input signal" type: Boolean PID_preheaterLP4.switch_OnOff.u2:DISCRETE(flow=false fixed = true ) "Connector of Boolean input signal" type: Boolean PI_preheater1.switch_OnOff.u2:DISCRETE(flow=false fixed = true ) "Connector of Boolean input signal" type: Boolean PI_valveControl_preheater_HP.switch_OnOff.u2:DISCRETE(flow=false fixed = true ) "Connector of Boolean input signal" type: Boolean steamGenerator.heatRelease.x_scaled[2]:VARIABLE(fixed = true protected = true ) "Scaled vector x" type: Real [2] Warning: The initial conditions are over specified. The following 12 initial equations are redundant, so they are removed from the initialization system: $DER.preheater_HP.wall.nTU.T_w_i[1] = 0.0 $DER.preheater_HP.wall.nTU.T_w_i[2] = 0.0 $DER.preheater_HP.wall.nTU.T_w_o[2] = 0.0 $DER.preheater_HP.wall.nTU.T_w_o[3] = 0.0 $DER.preheater_LP1.wall.nTU.T_w_i[1] = 0.0 $DER.preheater_LP1.wall.nTU.T_w_i[2] = 0.0 $DER.preheater_LP1.wall.nTU.T_w_o[2] = 0.0 $DER.preheater_LP1.wall.nTU.T_w_o[3] = 0.0 $DER.preheater_LP4.wall.nTU.T_w_i[1] = 0.0 $DER.preheater_LP4.wall.nTU.T_w_i[2] = 0.0 $DER.preheater_LP4.wall.nTU.T_w_o[2] = 0.0 $DER.preheater_LP4.wall.nTU.T_w_o[3] = 0.0. Notification: Performance of preBalanceInitialSystem (initialization_lambda0): time 0.1404/44.94, allocations: 57.02 MB / 12.03 GB, free: 400 MB / 1.374 GB Notification: Performance of partitionIndependentBlocks (initialization_lambda0): time 0.09829/45.04, allocations: 59.9 MB / 12.09 GB, free: 353.5 MB / 1.374 GB Error: Initialization problem is structural singular. Please, check the initial conditions. Notification: Performance of analyzeInitialSystem (initialization_lambda0): time 3.27/48.31, allocations: 0.4899 GB / 12.58 GB, free: 312.7 MB / 1.374 GB Notification: Performance of solveInitialSystemEqSystem (initialization_lambda0): time 0.0008417/48.31, allocations: 220 kB / 12.58 GB, free: 312.5 MB / 1.374 GB Notification: Performance of matching and sorting (n=14589) (initialization_lambda0): time 0.3001/48.61, allocations: 112.3 MB / 12.69 GB, free: 204.3 MB / 1.374 GB Notification: Performance of prepare postOptimizeDAE: time 0.0006902/48.61, allocations: 366.3 kB / 12.69 GB, free: 203.9 MB / 1.374 GB Notification: Performance of postOpt simplifyComplexFunction (initialization): time 0.006376/48.61, allocations: 2.588 MB / 12.69 GB, free: 201.3 MB / 1.374 GB Notification: Performance of postOpt tearingSystem (initialization): time 0.237/48.85, allocations: 27.12 MB / 12.71 GB, free: 174.1 MB / 1.374 GB Notification: Performance of postOpt solveSimpleEquations (initialization): time 0.06521/48.92, allocations: 16.29 MB / 12.73 GB, free: 157.8 MB / 1.374 GB Notification: Performance of postOpt calculateStrongComponentJacobians (initialization): time 0.8051/49.72, allocations: 132.4 MB / 12.86 GB, free: 354 MB / 1.374 GB Notification: Performance of postOpt simplifyAllExpressions (initialization): time 0.07322/49.8, allocations: 2.99 MB / 12.86 GB, free: 354 MB / 1.374 GB Notification: Performance of postOpt collapseArrayExpressions (initialization): time 0.0185/49.81, allocations: 4.099 MB / 12.87 GB, free: 354 MB / 1.374 GB Warning: Assuming fixed start value for the following 77 variables: inertia.phi:VARIABLE(start = 0.0 unit = "rad" fixed = true ) "Absolute rotation angle of component" type: Real steamGenerator.h_IP:VARIABLE(start = steamGenerator.h_RH_start unit = "J/kg" fixed = true nominal = 1000.0 ) "Specific enthalpy before IP injector" type: Real steamGenerator.p_IP:VARIABLE(min = 0.0 start = steamGenerator.p_RH_start unit = "Pa" fixed = true nominal = 1e5 ) "Pressure at hot reheat outlet" type: Real steamGenerator.h_HP:VARIABLE(start = steamGenerator.h_LS_start unit = "J/kg" fixed = true nominal = 1000.0 ) "Specific enthalpy before HP injector" type: Real steamGenerator.p_HP:VARIABLE(min = 0.0 start = steamGenerator.p_LS_start unit = "Pa" fixed = true nominal = 1e5 ) "Live steam pressure" type: Real condenser.wall.nTU.T_w_i[1]:VARIABLE(min = 0.0 start = 288.15 unit = "K" fixed = true nominal = 300.0 protected = true ) "Wall temperature at inner phase" type: Real [3] condenser.wall.nTU.T_w_o[3]:VARIABLE(min = 0.0 start = condenser.wall.nTU.T_w_o_start[3] unit = "K" fixed = true nominal = 300.0 protected = true ) "Wall temperature at outer phase" type: Real [3] condenser.wall.PI_2ph.outputI:VARIABLE(start = 0.0 fixed = true protected = true ) type: Real condenser.wall.PI_1ph_in.outputI:VARIABLE(start = 0.0 fixed = true protected = true ) type: Real condenser.tubes.h:VARIABLE(start = condenser.tubes.h_start unit = "J/kg" fixed = true nominal = 1000.0 protected = true ) "spec. enthalpy state" type: Real condenser.tubes.p:VARIABLE(min = 0.0 start = condenser.tubes.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer ) "System pressure" type: Real condenser.shell.h_liq:VARIABLE(start = condenser.shell.h_liq_start unit = "J/kg" fixed = true nominal = 1000.0 ) "Specific enthalpy of liquid phase" type: Real condenser.shell.h_vap:VARIABLE(start = condenser.shell.h_vap_start unit = "J/kg" fixed = true nominal = 1000.0 ) "Specific enthalpy of vapour phase" type: Real condenser.shell.p_vap:VARIABLE(min = 0.0 start = condenser.shell.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer ) "Vapour pressure" type: Real feedWaterTank.volume.h_liq:VARIABLE(start = feedWaterTank.volume.h_liq_start unit = "J/kg" fixed = true nominal = 1000.0 ) "Specific enthalpy of liquid phase" type: Real feedWaterTank.volume.h_vap:VARIABLE(start = feedWaterTank.volume.h_vap_start unit = "J/kg" fixed = true nominal = 1000.0 ) "Specific enthalpy of vapour phase" type: Real feedWaterTank.volume.p_vap:VARIABLE(min = 0.0 start = feedWaterTank.volume.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer ) "Vapour pressure" type: Real join_LP1.h:VARIABLE(start = join_LP1.h_start unit = "J/kg" fixed = true nominal = 1000.0 ) type: Real join_LP1.p:VARIABLE(min = 0.0 start = join_LP1.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer ) "System pressure" type: Real join_HP.h:VARIABLE(start = join_HP.h_start unit = "J/kg" fixed = true nominal = 1000.0 ) type: Real join_HP.p:VARIABLE(min = 0.0 start = Turbine_HP1.p_out_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer ) "System pressure" type: Real preheater_HP.tubes.h:VARIABLE(start = preheater_HP.tubes.h_start unit = "J/kg" fixed = true nominal = 1000.0 protected = true ) "spec. enthalpy state" type: Real preheater_HP.tubes.p:VARIABLE(min = 0.0 start = preheater_HP.tubes.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer ) "System pressure" type: Real preheater_HP.shell.h_liq:VARIABLE(start = preheater_HP.shell.h_liq_start unit = "J/kg" fixed = true nominal = 1000.0 ) "Specific enthalpy of liquid phase" type: Real preheater_HP.shell.h_vap:VARIABLE(start = preheater_HP.shell.h_vap_start unit = "J/kg" fixed = true nominal = 1000.0 ) "Specific enthalpy of vapour phase" type: Real preheater_HP.shell.p_vap:VARIABLE(min = 0.0 start = preheater_HP.shell.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer ) "Vapour pressure" type: Real preheater_HP.wall.nTU.T_w_i[3]:VARIABLE(min = 0.0 start = preheater_HP.wall.nTU.T_w_i_start[3] unit = "K" fixed = true protected = true ) "Wall temperature at inner phase" type: Real [3] preheater_HP.wall.nTU.T_w_o[1]:VARIABLE(min = 0.0 start = preheater_HP.wall.nTU.T_w_o_start[1] unit = "K" fixed = true protected = true ) "Wall temperature at outer phase" type: Real [3] preheater_HP.wall.PI_2ph.outputI:VARIABLE(start = 0.0 fixed = true protected = true ) type: Real preheater_HP.wall.PI_1ph_in.outputI:VARIABLE(start = 0.0 fixed = true protected = true ) type: Real preheater_LP1.tubes.h:VARIABLE(start = preheater_LP1.tubes.h_start unit = "J/kg" fixed = true nominal = 1000.0 protected = true ) "spec. enthalpy state" type: Real preheater_LP1.tubes.p:VARIABLE(min = 0.0 start = preheater_LP1.tubes.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer ) "System pressure" type: Real preheater_LP1.shell.h_liq:VARIABLE(start = preheater_LP1.shell.h_liq_start unit = "J/kg" fixed = true nominal = 1000.0 ) "Specific enthalpy of liquid phase" type: Real preheater_LP1.shell.h_vap:VARIABLE(start = preheater_LP1.shell.h_vap_start unit = "J/kg" fixed = true nominal = 1000.0 ) "Specific enthalpy of vapour phase" type: Real preheater_LP1.shell.p_vap:VARIABLE(min = 0.0 start = preheater_LP1.shell.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer ) "Vapour pressure" type: Real preheater_LP1.wall.nTU.T_w_i[3]:VARIABLE(min = 0.0 start = preheater_LP1.wall.nTU.T_w_i_start[3] unit = "K" fixed = true protected = true ) "Wall temperature at inner phase" type: Real [3] preheater_LP1.wall.nTU.T_w_o[1]:VARIABLE(min = 0.0 start = preheater_LP1.wall.nTU.T_w_o_start[1] unit = "K" fixed = true protected = true ) "Wall temperature at outer phase" type: Real [3] preheater_LP1.wall.PI_2ph.outputI:VARIABLE(start = 0.0 fixed = true protected = true ) type: Real preheater_LP1.wall.PI_1ph_in.outputI:VARIABLE(start = 0.0 fixed = true protected = true ) type: Real join_LP_main.h:VARIABLE(start = join_LP_main.h_start unit = "J/kg" fixed = true nominal = 1000.0 ) type: Real join_LP_main.p:VARIABLE(min = 0.0 start = join_LP_main.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer ) "System pressure" type: Real split_IP2.h:VARIABLE(start = split_IP2.h_start unit = "J/kg" fixed = true nominal = 1000.0 ) type: Real split_IP2.p:VARIABLE(min = 0.0 start = split_IP2.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer ) "System pressure" type: Real join_IP3.h:VARIABLE(start = join_IP3.h_start unit = "J/kg" fixed = true nominal = 1000.0 ) type: Real join_IP3.p:VARIABLE(min = 0.0 start = join_IP3.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer ) "System pressure" type: Real join_LP2.h:VARIABLE(start = join_LP2.h_start unit = "J/kg" fixed = true nominal = 1000.0 ) type: Real join_LP2.p:VARIABLE(min = 0.0 start = join_LP2.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer ) "System pressure" type: Real join_LP3.h:VARIABLE(start = join_LP3.h_start unit = "J/kg" fixed = true nominal = 1000.0 ) type: Real join_LP3.p:VARIABLE(min = 0.0 start = join_LP3.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer ) "System pressure" type: Real preheater_LP2.shell.h_liq:VARIABLE(start = preheater_LP2.shell.h_liq_start unit = "J/kg" fixed = true nominal = 1000.0 ) "Specific enthalpy of liquid phase" type: Real preheater_LP2.shell.h_vap:VARIABLE(start = preheater_LP2.shell.h_vap_start unit = "J/kg" fixed = true nominal = 1000.0 ) "Specific enthalpy of vapour phase" type: Real preheater_LP2.shell.p_vap:VARIABLE(min = 0.0 start = preheater_LP2.shell.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer ) "Vapour pressure" type: Real preheater_LP3.tubes.h:VARIABLE(start = preheater_LP3.tubes.h_start unit = "J/kg" fixed = true nominal = 1000.0 protected = true ) "spec. enthalpy state" type: Real preheater_LP3.tubes.p:VARIABLE(min = 0.0 start = preheater_LP3.tubes.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer ) "System pressure" type: Real preheater_LP3.shell.h_liq:VARIABLE(start = preheater_LP3.shell.h_liq_start unit = "J/kg" fixed = true nominal = 1000.0 ) "Specific enthalpy of liquid phase" type: Real preheater_LP3.shell.h_vap:VARIABLE(start = preheater_LP3.shell.h_vap_start unit = "J/kg" fixed = true nominal = 1000.0 ) "Specific enthalpy of vapour phase" type: Real preheater_LP3.shell.p_vap:VARIABLE(min = 0.0 start = preheater_LP3.shell.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer ) "Vapour pressure" type: Real preheater_LP4.tubes.h:VARIABLE(start = preheater_LP4.tubes.h_start unit = "J/kg" fixed = true nominal = 1000.0 protected = true ) "spec. enthalpy state" type: Real preheater_LP4.tubes.p:VARIABLE(min = 0.0 start = preheater_LP4.tubes.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer ) "System pressure" type: Real preheater_LP4.shell.h_liq:VARIABLE(start = preheater_LP4.shell.h_liq_start unit = "J/kg" fixed = true nominal = 1000.0 ) "Specific enthalpy of liquid phase" type: Real preheater_LP4.shell.h_vap:VARIABLE(start = preheater_LP4.shell.h_vap_start unit = "J/kg" fixed = true nominal = 1000.0 ) "Specific enthalpy of vapour phase" type: Real preheater_LP4.shell.p_vap:VARIABLE(min = 0.0 start = preheater_LP4.shell.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer ) "Vapour pressure" type: Real preheater_LP4.wall.nTU.T_w_i[3]:VARIABLE(min = 0.0 start = preheater_LP4.wall.nTU.T_w_i_start[3] unit = "K" fixed = true protected = true ) "Wall temperature at inner phase" type: Real [3] preheater_LP4.wall.nTU.T_w_o[1]:VARIABLE(min = 0.0 start = preheater_LP4.wall.nTU.T_w_o_start[1] unit = "K" fixed = true protected = true ) "Wall temperature at outer phase" type: Real [3] join_preheater_LP3.h:VARIABLE(start = join_preheater_LP3.h_start unit = "J/kg" fixed = true nominal = 1000.0 ) type: Real join_preheater_LP3.p:VARIABLE(min = 0.0 start = join_preheater_LP3.p_start unit = "Pa" fixed = true nominal = 1e5 stateSelect=StateSelect.prefer ) "System pressure" type: Real downComer_feedWaterTank.h[1]:VARIABLE(start = downComer_feedWaterTank.mechanicalEquilibrium.h_start[1] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true ) "Cell enthalpy" type: Real [3] downComer_feedWaterTank.h[2]:VARIABLE(start = downComer_feedWaterTank.mechanicalEquilibrium.h_start[2] unit = "J/kg" fixed = true nominal = 1000.0 stateSelect=StateSelect.prefer protected = true ) "Cell enthalpy" type: Real [3] downComer_feedWaterTank.p[1]:VARIABLE(min = 0.0 start = downComer_feedWaterTank.p_start_internal[1] unit = "Pa" fixed = true nominal = 1e5 protected = true ) "Cell pressure" type: Real [3] downComer_feedWaterTank.p[2]:VARIABLE(min = 0.0 start = downComer_feedWaterTank.p_start_internal[2] unit = "Pa" fixed = true nominal = 1e5 protected = true ) "Cell pressure" type: Real [3] PI_Pump_cond.switch_OnOff.u2:DISCRETE(flow=false fixed = true ) "Connector of Boolean input signal" type: Boolean PID_NDVW3.switch_OnOff.u2:DISCRETE(flow=false fixed = true ) "Connector of Boolean input signal" type: Boolean PID_preheaterLP3.switch_OnOff.u2:DISCRETE(flow=false fixed = true ) "Connector of Boolean input signal" type: Boolean PID_preheaterLP4.switch_OnOff.u2:DISCRETE(flow=false fixed = true ) "Connector of Boolean input signal" type: Boolean PI_preheater1.switch_OnOff.u2:DISCRETE(flow=false fixed = true ) "Connector of Boolean input signal" type: Boolean PI_valveControl_preheater_HP.switch_OnOff.u2:DISCRETE(flow=false fixed = true ) "Connector of Boolean input signal" type: Boolean steamGenerator.heatRelease.x_scaled[2]:VARIABLE(fixed = true protected = true ) "Scaled vector x" type: Real [2] Warning: The initial conditions are over specified. The following 12 initial equations are redundant, so they are removed from the initialization_lambda0 system: $DER.preheater_HP.wall.nTU.T_w_i[1] = 0.0 $DER.preheater_HP.wall.nTU.T_w_i[2] = 0.0 $DER.preheater_HP.wall.nTU.T_w_o[2] = 0.0 $DER.preheater_HP.wall.nTU.T_w_o[3] = 0.0 $DER.preheater_LP1.wall.nTU.T_w_i[1] = 0.0 $DER.preheater_LP1.wall.nTU.T_w_i[2] = 0.0 $DER.preheater_LP1.wall.nTU.T_w_o[2] = 0.0 $DER.preheater_LP1.wall.nTU.T_w_o[3] = 0.0 $DER.preheater_LP4.wall.nTU.T_w_i[1] = 0.0 $DER.preheater_LP4.wall.nTU.T_w_i[2] = 0.0 $DER.preheater_LP4.wall.nTU.T_w_o[2] = 0.0 $DER.preheater_LP4.wall.nTU.T_w_o[3] = 0.0. Notification: Model statistics after passing the back-end for initialization: * Number of independent subsystems: 3533 * Number of states: 0 () * Number of discrete variables: 103 (preheater_LP4.wall.nTU.smallShellFlow[2],preheater_LP1.wall.nTU.smallShellFlow[2],preheater_HP.wall.nTU.smallShellFlow[2],condenser.wall.nTU.smallShellFlow[2],$PRE.PI_Pump_cond.time_lag_I_activation.entryTime,$PRE.PI_Pump_cond.switch_OnOff.u2,$PRE.PID_NDVW3.time_lag_I_activation.entryTime,$PRE.PID_NDVW3.switch_OnOff.u2,$PRE.PID_preheaterLP3.time_lag_I_activation.entryTime,$PRE.PID_preheaterLP3.switch_OnOff.u2,$PRE.PID_preheaterLP4.time_lag_I_activation.entryTime,$PRE.PID_preheaterLP4.switch_OnOff.u2,$PRE.PI_preheater1.time_lag_I_activation.entryTime,$PRE.PI_preheater1.switch_OnOff.u2,$PRE.PI_valveControl_preheater_HP.time_lag_I_activation.entryTime,$PRE.PI_valveControl_preheater_HP.switch_OnOff.u2,valveControl_preheater_HP.pressureLoss.normIsValid,valve_HP.pressureLoss.normIsValid,valve_IP3.pressureLoss.normIsValid,motor.table.tableID,PI_Pump_cond.I_activation.y,PI_Pump_cond.time_lag_I_activation.entryTime,PI_Pump_cond.switch_OnOff.u2,downComer_feedWaterTank.heatTransfer.table_block.tableID,PTarget.nextEventScaled,PTarget.nextEvent,$PRE.PTarget.nextEvent,PTarget.last,PTarget.b,PTarget.a,PID_NDVW3.I_activation.y,PID_NDVW3.time_lag_I_activation.entryTime,PID_NDVW3.switch_OnOff.u2,PID_preheaterLP3.I_activation.y,PID_preheaterLP3.time_lag_I_activation.entryTime,PID_preheaterLP3.switch_OnOff.u2,PID_preheaterLP4.I_activation.y,PID_preheaterLP4.time_lag_I_activation.entryTime,PID_preheaterLP4.switch_OnOff.u2,preheater_LP4.wall.nTU.smallShellFlow[3],preheater_LP4.wall.nTU.smallShellFlow[1],preheater_LP4.wall.nTU.mass,preheater_LP4.shell.phaseBorder.table.tableID,preheater_LP3.shell.phaseBorder.table.tableID,preheater_LP2.shell.phaseBorder.table.tableID,PI_preheater1.I_activation.y,PI_preheater1.time_lag_I_activation.entryTime,PI_preheater1.switch_OnOff.u2,PI_valveControl_preheater_HP.I_activation.y,PI_valveControl_preheater_HP.time_lag_I_activation.entryTime,PI_valveControl_preheater_HP.switch_OnOff.u2,preheater_LP1.wall.nTU.smallShellFlow[3],preheater_LP1.wall.nTU.smallShellFlow[1],preheater_LP1.wall.nTU.mass,preheater_LP1.shell.phaseBorder.table.tableID,preheater_HP.wall.nTU.smallShellFlow[3],preheater_HP.wall.nTU.smallShellFlow[1],preheater_HP.wall.nTU.mass,preheater_HP.shell.phaseBorder.table.tableID,feedWaterTank.volume.phaseBorder.table.tableID,condenser.shell.phaseBorder.table.tableID,condenser.wall.nTU.smallShellFlow[3],condenser.wall.nTU.smallShellFlow[1],condenser.wall.nTU.mass,steamGenerator.calculateEfficiency.tableID,steamGenerator.convert2HPFiring.tableID,steamGenerator.convert2PressureDrop_IP.tableID,steamGenerator.convert2PressureDrop_HP.tableID,$whenCondition1,$whenCondition2,$whenCondition3,$whenCondition4,$whenCondition5,$whenCondition6,$whenCondition7,$whenCondition8,$whenCondition9,$whenCondition10,$whenCondition11,$whenCondition12,$whenCondition13,INIT.valvePreFeedWaterTank.table1.tableID,INIT.boiler.table1.tableID,INIT.boiler.table2.tableID,INIT.valve_HP.table1.tableID,INIT.valve_LP1.table1.tableID,INIT.splitIP2.table.tableID,INIT.splitIP3.table.tableID,INIT.pressureAnchor_constFlow1_1.table.tableID,INIT.valve_LP2.table1.tableID,INIT.valve_LP3.table1.tableID,INIT.downComer_feedWaterTank.table.tableID,NOM.valvePreFeedWaterTank.table1.tableID,NOM.boiler.table1.tableID,NOM.boiler.table2.tableID,NOM.valve_HP.table1.tableID,NOM.valve_LP1.table1.tableID,NOM.splitIP2.table.tableID,NOM.splitIP3.table.tableID,NOM.pressureAnchor_constFlow1_1.table.tableID,NOM.valve_LP2.table1.tableID,NOM.valve_LP3.table1.tableID,NOM.downComer_feedWaterTank.table.tableID) * Number of discrete states: 0 () * Number of clocked states: 0 () * Top-level inputs: 0 Notification: Strong component statistics for initialization (9407): * Single equations (assignments): 8641 * Array equations: 0 * Algorithm blocks: 1 * Record equations: 684 * When equations: 0 * If-equations: 0 * Equation systems (not torn): 22 * Torn equation systems: 59 * Mixed (continuous/discrete) equation systems: 0 Notification: Equation system details (not torn): * Constant Jacobian (size): 0 systems * Linear Jacobian (size,density): 0 systems * Non-linear Jacobian (size): 22 systems {1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1} * Without analytic Jacobian (size): 0 systems Notification: Torn system details for strict tearing set: * Linear torn systems (#iteration vars, #inner vars, density): 31 systems {(1,1,100.0%), (2,2,100.0%), (2,2,100.0%), (4,3,87.5%), (1,4,100.0%), (1,2,100.0%), (1,1,100.0%), (1,1,100.0%), (4,3,87.5%), (4,5,93.8%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (4,3,87.5%), (1,4,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (4,3,87.5%), (1,1,100.0%), (1,3,100.0%), (4,3,87.5%), (1,1,100.0%), (1,1,100.0%), (4,3,87.5%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%)} * Non-linear torn systems (#iteration vars, #inner vars): 28 systems {(1,1), (3,14), (2,18), (4,18), (15,54), (1,2), (1,3), (1,5), (1,13), (1,3), (1,3), (1,1), (1,3), (14,74), (1,8), (5,13), (11,64), (1,2), (1,8), (5,13), (2,5), (1,80), (1,6), (1,3), (1,3), (1,4), (1,3), (1,80)} Notification: Performance of prepare postOptimizeDAE: time 0.03408/49.85, allocations: 5.478 MB / 12.87 GB, free: 353.5 MB / 1.374 GB Notification: Performance of postOpt lateInlineFunction (simulation): time 0.03158/49.88, allocations: 8.475 MB / 12.88 GB, free: 353.5 MB / 1.374 GB Notification: Performance of postOpt wrapFunctionCalls (simulation): time 0.25/50.13, allocations: 98.74 MB / 12.98 GB, free: 315.8 MB / 1.374 GB Notification: Performance of postOpt inlineArrayEqn (simulation): time 0.001855/50.13, allocations: 0.8067 MB / 12.98 GB, free: 315.8 MB / 1.374 GB Notification: Performance of postOpt constantLinearSystem (simulation): time 0.0004732/50.13, allocations: 242.7 kB / 12.98 GB, free: 315.8 MB / 1.374 GB Notification: Performance of postOpt simplifysemiLinear (simulation): time 0.1657/50.3, allocations: 60.36 MB / 13.04 GB, free: 291.5 MB / 1.374 GB Notification: Performance of postOpt removeSimpleEquations (simulation): time 1.215/51.51, allocations: 329.2 MB / 13.36 GB, free: 385.4 MB / 1.374 GB Notification: Performance of postOpt simplifyComplexFunction (simulation): time 0.005756/51.52, allocations: 2.016 MB / 13.36 GB, free: 385.3 MB / 1.374 GB Notification: Performance of postOpt solveSimpleEquations (simulation): time 0.03524/51.55, allocations: 7.093 MB / 13.37 GB, free: 384.7 MB / 1.374 GB Notification: Performance of postOpt tearingSystem (simulation): time 0.1265/51.68, allocations: 15.29 MB / 13.38 GB, free: 382.6 MB / 1.374 GB Notification: Performance of postOpt inputDerivativesUsed (simulation): time 0.01342/51.69, allocations: 1.818 MB / 13.38 GB, free: 382 MB / 1.374 GB Notification: Performance of postOpt calculateStrongComponentJacobians (simulation): time 0.07929/51.77, allocations: 95.93 MB / 13.48 GB, free: 297.6 MB / 1.374 GB Notification: Performance of postOpt calculateStateSetsJacobians (simulation): time 0.0001202/51.77, allocations: 287.6 kB / 13.48 GB, free: 297.6 MB / 1.374 GB Notification: Performance of postOpt symbolicJacobian (simulation): time 0.2839/52.06, allocations: 144.1 MB / 13.62 GB, free: 165.4 MB / 1.374 GB Notification: Performance of postOpt removeConstants (simulation): time 0.06443/52.12, allocations: 21.27 MB / 13.64 GB, free: 148.7 MB / 1.374 GB Notification: Performance of postOpt simplifyTimeIndepFuncCalls (simulation): time 0.03152/52.15, allocations: 1.147 MB / 13.64 GB, free: 147.6 MB / 1.374 GB Notification: Performance of postOpt simplifyAllExpressions (simulation): time 0.05599/52.21, allocations: 1.531 MB / 13.64 GB, free: 146.1 MB / 1.374 GB Notification: Performance of postOpt findZeroCrossings (simulation): time 0.01586/52.23, allocations: 3.898 MB / 13.65 GB, free: 142.2 MB / 1.374 GB Notification: Performance of postOpt collapseArrayExpressions (simulation): time 0.01256/52.24, allocations: 2.077 MB / 13.65 GB, free: 140.1 MB / 1.374 GB Notification: Performance of sorting global known variables: time 0.7842/53.02, allocations: 49.27 MB / 13.7 GB, free: 407.3 MB / 1.374 GB Notification: Performance of sort global known variables: time 7.81e-07/53.02, allocations: 2.562 kB / 13.7 GB, free: 407.3 MB / 1.374 GB Notification: Performance of remove unused functions: time 0.1786/53.2, allocations: 33.42 MB / 13.73 GB, free: 407.3 MB / 1.374 GB Notification: Model statistics after passing the back-end for simulation: * Number of independent subsystems: 830 * Number of states: 166 (PI_valveControl_preheater_HP.smoothPIDInput.y_aux,PI_valveControl_preheater_HP.smoothPIDOutput.y_aux,PI_valveControl_preheater_HP.smoothPIDOutput1.y_aux,PI_valveControl_preheater_HP.resetValueI,PI_preheater1.smoothPIDInput.y_aux,PI_preheater1.smoothPIDOutput.y_aux,PI_preheater1.smoothPIDOutput1.y_aux,PI_preheater1.resetValueI,PID_preheaterLP4.smoothPIDOutput1.y_aux,PID_preheaterLP4.resetValueI,PID_preheaterLP3.smoothPIDOutput1.y_aux,PID_preheaterLP3.resetValueI,PID_NDVW3.smoothPIDOutput1.y_aux,PID_NDVW3.resetValueI,PI_Pump_cond.smoothPIDInput.y_aux,PI_Pump_cond.smoothPIDOutput.y_aux,PI_Pump_cond.smoothPIDOutput1.y_aux,PI_Pump_cond.resetValueI,steamGenerator.h_IP,steamGenerator.p_IP,steamGenerator.h_HP,steamGenerator.p_HP,steamGenerator.heatRelease.x_scaled[1],steamGenerator.heatRelease.x_scaled[2],condenser.wall.nTU.T_w_i[1],condenser.wall.nTU.T_w_o[3],condenser.wall.nTU.Q_flow_s[1],condenser.wall.nTU.Q_flow_s[2],condenser.wall.nTU.Q_flow_s[3],condenser.wall.nTU.yps[1],condenser.wall.nTU.yps[2],condenser.wall.nTU.yps[3],condenser.wall.PI_2ph.outputI,condenser.wall.PI_1ph_in.outputI,condenser.tubes.h,condenser.tubes.p,condenser.shell.h_liq,condenser.shell.h_vap,condenser.shell.volume_vap,condenser.shell.p_vap,feedWaterTank.volume.h_liq,feedWaterTank.volume.h_vap,feedWaterTank.volume.volume_vap,feedWaterTank.volume.p_vap,feedWaterTank.volume.level_abs_,feedWaterTank.wall.U[1],feedWaterTank.wall.U[2],feedWaterTank.wall.U[3],Pump_cond.rho_CF_ps,Pump_cond.rho_upstream_ps,join_LP1.h,join_LP1.p,join_HP.h,join_HP.p,preheater_HP.tubes.h,preheater_HP.tubes.p,preheater_HP.shell.h_liq,preheater_HP.shell.h_vap,preheater_HP.shell.volume_vap,preheater_HP.shell.p_vap,preheater_HP.wall.nTU.T_w_i[3],preheater_HP.wall.nTU.T_w_o[1],preheater_HP.wall.nTU.Q_flow_s[1],preheater_HP.wall.nTU.Q_flow_s[2],preheater_HP.wall.nTU.Q_flow_s[3],preheater_HP.wall.nTU.yps[1],preheater_HP.wall.nTU.yps[2],preheater_HP.wall.nTU.yps[3],preheater_HP.wall.PI_2ph.outputI,preheater_HP.wall.PI_1ph_in.outputI,preheater_LP1.tubes.h,preheater_LP1.tubes.p,preheater_LP1.shell.h_liq,preheater_LP1.shell.h_vap,preheater_LP1.shell.volume_vap,preheater_LP1.shell.p_vap,preheater_LP1.wall.nTU.T_w_i[3],preheater_LP1.wall.nTU.T_w_o[1],preheater_LP1.wall.nTU.Q_flow_s[1],preheater_LP1.wall.nTU.Q_flow_s[2],preheater_LP1.wall.nTU.Q_flow_s[3],preheater_LP1.wall.nTU.yps[1],preheater_LP1.wall.nTU.yps[2],preheater_LP1.wall.nTU.yps[3],preheater_LP1.wall.PI_2ph.outputI,preheater_LP1.wall.PI_1ph_in.outputI,PI_valveControl_preheater_HP.resetValueP,PI_valveControl_preheater_HP.resetValueID,PI_valveControl_preheater_HP.I.y,measurement.y,join_LP_main.h,join_LP_main.p,PI_preheater1.resetValueP,PI_preheater1.resetValueID,PI_preheater1.I.y,split_IP2.h,split_IP2.p,join_IP3.h,join_IP3.p,join_LP2.h,join_LP2.p,join_LP3.h,join_LP3.p,preheater_LP2.tubes.h,preheater_LP2.tubes.p,preheater_LP2.shell.h_liq,preheater_LP2.shell.h_vap,preheater_LP2.shell.volume_vap,preheater_LP2.shell.p_vap,preheater_LP2.wall.U[1],preheater_LP2.wall.U[2],preheater_LP2.wall.U[3],preheater_LP3.tubes.h,preheater_LP3.tubes.p,preheater_LP3.shell.h_liq,preheater_LP3.shell.h_vap,preheater_LP3.shell.volume_vap,preheater_LP3.shell.p_vap,preheater_LP3.wall.U[1],preheater_LP3.wall.U[2],preheater_LP3.wall.U[3],preheater_LP4.tubes.h,preheater_LP4.tubes.p,preheater_LP4.shell.h_liq,preheater_LP4.shell.h_vap,preheater_LP4.shell.volume_vap,preheater_LP4.shell.p_vap,preheater_LP4.wall.nTU.T_w_i[3],preheater_LP4.wall.nTU.T_w_o[1],preheater_LP4.wall.nTU.Q_flow_s[1],preheater_LP4.wall.nTU.Q_flow_s[2],preheater_LP4.wall.nTU.Q_flow_s[3],preheater_LP4.wall.nTU.yps[1],preheater_LP4.wall.nTU.yps[2],preheater_LP4.wall.nTU.yps[3],preheater_LP4.wall.PI_2ph.outputI,preheater_LP4.wall.PI_1ph_in.outputI,join_preheater_LP3.h,join_preheater_LP3.p,PID_preheaterLP4.resetValueP,PID_preheaterLP4.resetValueID,PID_preheaterLP4.I.y,PID_preheaterLP4.smoothPIDInput.y_aux,PID_preheaterLP4.smoothPIDOutput.y_aux,PID_preheaterLP3.resetValueP,PID_preheaterLP3.resetValueID,PID_preheaterLP3.I.y,PID_preheaterLP3.smoothPIDInput.y_aux,PID_preheaterLP3.smoothPIDOutput.y_aux,PID_NDVW3.resetValueP,PID_NDVW3.resetValueID,PID_NDVW3.I.y,PID_NDVW3.smoothPIDInput.y_aux,PID_NDVW3.smoothPIDOutput.y_aux,downComer_feedWaterTank.h[1],downComer_feedWaterTank.h[2],downComer_feedWaterTank.h[3],downComer_feedWaterTank.p[1],downComer_feedWaterTank.p[2],downComer_feedWaterTank.p[3],PI_Pump_cond.resetValueP,PI_Pump_cond.resetValueID,PI_Pump_cond.I.y,motor.rpm,motor.shaft.phi,inertia.phi) * Number of discrete variables: 83 (NOM.downComer_feedWaterTank.table.tableID,NOM.valve_LP3.table1.tableID,NOM.valve_LP2.table1.tableID,NOM.pressureAnchor_constFlow1_1.table.tableID,NOM.splitIP3.table.tableID,NOM.splitIP2.table.tableID,NOM.valve_LP1.table1.tableID,NOM.valve_HP.table1.tableID,NOM.boiler.table2.tableID,NOM.boiler.table1.tableID,NOM.valvePreFeedWaterTank.table1.tableID,INIT.downComer_feedWaterTank.table.tableID,INIT.valve_LP3.table1.tableID,INIT.valve_LP2.table1.tableID,INIT.pressureAnchor_constFlow1_1.table.tableID,INIT.splitIP3.table.tableID,INIT.splitIP2.table.tableID,INIT.valve_LP1.table1.tableID,INIT.valve_HP.table1.tableID,INIT.boiler.table2.tableID,INIT.boiler.table1.tableID,INIT.valvePreFeedWaterTank.table1.tableID,$whenCondition13,$whenCondition12,$whenCondition11,$whenCondition10,$whenCondition9,$whenCondition8,$whenCondition7,$whenCondition6,$whenCondition5,$whenCondition4,$whenCondition3,$whenCondition2,$whenCondition1,steamGenerator.convert2PressureDrop_HP.tableID,steamGenerator.convert2PressureDrop_IP.tableID,steamGenerator.convert2HPFiring.tableID,steamGenerator.calculateEfficiency.tableID,condenser.wall.nTU.mass,condenser.wall.nTU.smallShellFlow[1],condenser.wall.nTU.smallShellFlow[3],condenser.shell.phaseBorder.table.tableID,feedWaterTank.volume.phaseBorder.table.tableID,preheater_HP.shell.phaseBorder.table.tableID,preheater_HP.wall.nTU.mass,preheater_HP.wall.nTU.smallShellFlow[1],preheater_HP.wall.nTU.smallShellFlow[3],preheater_LP1.shell.phaseBorder.table.tableID,preheater_LP1.wall.nTU.mass,preheater_LP1.wall.nTU.smallShellFlow[1],preheater_LP1.wall.nTU.smallShellFlow[3],PI_valveControl_preheater_HP.switch_OnOff.u2,PI_valveControl_preheater_HP.time_lag_I_activation.entryTime,PI_valveControl_preheater_HP.I_activation.y,PI_preheater1.switch_OnOff.u2,PI_preheater1.time_lag_I_activation.entryTime,PI_preheater1.I_activation.y,preheater_LP2.shell.phaseBorder.table.tableID,preheater_LP3.shell.phaseBorder.table.tableID,preheater_LP4.shell.phaseBorder.table.tableID,preheater_LP4.wall.nTU.mass,preheater_LP4.wall.nTU.smallShellFlow[1],preheater_LP4.wall.nTU.smallShellFlow[3],PID_preheaterLP4.switch_OnOff.u2,PID_preheaterLP4.time_lag_I_activation.entryTime,PID_preheaterLP4.I_activation.y,PID_preheaterLP3.switch_OnOff.u2,PID_preheaterLP3.time_lag_I_activation.entryTime,PID_preheaterLP3.I_activation.y,PID_NDVW3.switch_OnOff.u2,PID_NDVW3.time_lag_I_activation.entryTime,PID_NDVW3.I_activation.y,PTarget.a,PTarget.b,PTarget.last,PTarget.nextEvent,PTarget.nextEventScaled,downComer_feedWaterTank.heatTransfer.table_block.tableID,PI_Pump_cond.switch_OnOff.u2,PI_Pump_cond.time_lag_I_activation.entryTime,PI_Pump_cond.I_activation.y,motor.table.tableID) * Number of discrete states: 18 (PI_Pump_cond.switch_OnOff.u2,PID_NDVW3.switch_OnOff.u2,PID_preheaterLP3.switch_OnOff.u2,PID_preheaterLP4.switch_OnOff.u2,PI_preheater1.switch_OnOff.u2,PI_valveControl_preheater_HP.switch_OnOff.u2,PTarget.nextEvent,PTarget.last,PTarget.nextEventScaled,PTarget.b,PTarget.a,$whenCondition1,PI_Pump_cond.toPU.y,PID_NDVW3.toPU.y,PID_preheaterLP3.toPU.y,PID_preheaterLP4.toPU.y,PI_preheater1.toPU.y,PI_valveControl_preheater_HP.toPU.y) * Number of clocked states: 0 () * Top-level inputs: 0 Notification: Strong component statistics for simulation (4398): * Single equations (assignments): 3600 * Array equations: 0 * Algorithm blocks: 1 * Record equations: 684 * When equations: 45 * If-equations: 0 * Equation systems (not torn): 2 * Torn equation systems: 66 * Mixed (continuous/discrete) equation systems: 0 Notification: Equation system details (not torn): * Constant Jacobian (size): 0 systems * Linear Jacobian (size,density): 0 systems * Non-linear Jacobian (size): 2 systems {1, 1} * Without analytic Jacobian (size): 0 systems Notification: Torn system details for strict tearing set: * Linear torn systems (#iteration vars, #inner vars, density): 39 systems {(1,1,100.0%), (1,1,100.0%), (2,2,100.0%), (2,2,100.0%), (1,1,100.0%), (1,1,100.0%), (3,3,77.8%), (3,3,77.8%), (3,3,77.8%), (3,3,77.8%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (3,3,77.8%), (3,3,77.8%), (4,3,87.5%), (4,3,87.5%), (4,3,87.5%), (4,3,87.5%), (1,4,100.0%), (1,1,100.0%), (4,5,93.8%), (1,1,100.0%), (1,1,100.0%), (4,3,87.5%), (1,5,100.0%), (4,3,87.5%), (1,5,100.0%), (1,5,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,1,100.0%), (1,3,100.0%), (1,1,100.0%)} * Non-linear torn systems (#iteration vars, #inner vars): 27 systems {(1,4), (1,4), (1,2), (1,3), (1,6), (1,4), (1,15), (1,4), (1,3), (1,4), (1,1), (1,13), (1,4), (1,2), (1,13), (1,4), (1,4), (1,4), (1,6), (1,4), (1,4), (1,5), (1,4), (1,6), (3,8), (3,8), (1,8)} [/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-main/Internals/VLEFluidConfigurations/FullyMixtureCompatible/VLEFluid.mo:86:25-87:61:writable] Warning: Could not find library TILMedia181ClaRa in either of: /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.a /usr/lib/x86_64-linux-gnu/libTILMedia181ClaRa.a /lib/x86_64-linux-gnu/libTILMedia181ClaRa.a /usr/lib//libTILMedia181ClaRa.a /lib//libTILMedia181ClaRa.a /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.a /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib//libTILMedia181ClaRa.a /home/hudson/saved_omc/libraries/.openmodelica/binaries/ClaRa/libTILMedia181ClaRa.a /home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Resources/Library/x86_64-linux/libTILMedia181ClaRa.a /home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Resources/Library/linux64/libTILMedia181ClaRa.a /home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Resources/Library/libTILMedia181ClaRa.a /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.so /usr/lib/x86_64-linux-gnu/libTILMedia181ClaRa.so /lib/x86_64-linux-gnu/libTILMedia181ClaRa.so /usr/lib//libTILMedia181ClaRa.so /lib//libTILMedia181ClaRa.so /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.so /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib//libTILMedia181ClaRa.so /home/hudson/saved_omc/libraries/.openmodelica/binaries/ClaRa/libTILMedia181ClaRa.so /home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Resources/Library/x86_64-linux/libTILMedia181ClaRa.so /home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Resources/Library/linux64/libTILMedia181ClaRa.so /home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Resources/Library/libTILMedia181ClaRa.so [/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-main/Internals/VLEFluidConfigurations/FullyMixtureCompatible/VLEFluid.mo:119:25-120:61:writable] Warning: Could not find library TILMedia181ClaRa in either of: /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.a /usr/lib/x86_64-linux-gnu/libTILMedia181ClaRa.a /lib/x86_64-linux-gnu/libTILMedia181ClaRa.a /usr/lib//libTILMedia181ClaRa.a /lib//libTILMedia181ClaRa.a /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.a /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib//libTILMedia181ClaRa.a /home/hudson/saved_omc/libraries/.openmodelica/binaries/ClaRa/libTILMedia181ClaRa.a /home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Resources/Library/x86_64-linux/libTILMedia181ClaRa.a /home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Resources/Library/linux64/libTILMedia181ClaRa.a /home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Resources/Library/libTILMedia181ClaRa.a /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.so /usr/lib/x86_64-linux-gnu/libTILMedia181ClaRa.so /lib/x86_64-linux-gnu/libTILMedia181ClaRa.so /usr/lib//libTILMedia181ClaRa.so /lib//libTILMedia181ClaRa.so /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.so /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib//libTILMedia181ClaRa.so /home/hudson/saved_omc/libraries/.openmodelica/binaries/ClaRa/libTILMedia181ClaRa.so /home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Resources/Library/x86_64-linux/libTILMedia181ClaRa.so /home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Resources/Library/linux64/libTILMedia181ClaRa.so /home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Resources/Library/libTILMedia181ClaRa.so [/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-main/Internals/VLEFluidConfigurations/FullyMixtureCompatible/VLEFluid.mo:121:25-122:60:writable] Warning: Could not find library TILMedia181ClaRa in either of: /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.a /usr/lib/x86_64-linux-gnu/libTILMedia181ClaRa.a /lib/x86_64-linux-gnu/libTILMedia181ClaRa.a /usr/lib//libTILMedia181ClaRa.a /lib//libTILMedia181ClaRa.a /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.a /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib//libTILMedia181ClaRa.a /home/hudson/saved_omc/libraries/.openmodelica/binaries/ClaRa/libTILMedia181ClaRa.a /home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Resources/Library/x86_64-linux/libTILMedia181ClaRa.a /home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Resources/Library/linux64/libTILMedia181ClaRa.a /home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Resources/Library/libTILMedia181ClaRa.a /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.so /usr/lib/x86_64-linux-gnu/libTILMedia181ClaRa.so /lib/x86_64-linux-gnu/libTILMedia181ClaRa.so /usr/lib//libTILMedia181ClaRa.so /lib//libTILMedia181ClaRa.so /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.so /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib//libTILMedia181ClaRa.so /home/hudson/saved_omc/libraries/.openmodelica/binaries/ClaRa/libTILMedia181ClaRa.so /home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Resources/Library/x86_64-linux/libTILMedia181ClaRa.so /home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Resources/Library/linux64/libTILMedia181ClaRa.so /home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Resources/Library/libTILMedia181ClaRa.so [/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-main/Internals/VLEFluidConfigurations/FullyMixtureCompatible/VLEFluid.mo:119:25-120:61:writable] Warning: Could not find library TILMedia181ClaRa in either of: /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.a /usr/lib/x86_64-linux-gnu/libTILMedia181ClaRa.a /lib/x86_64-linux-gnu/libTILMedia181ClaRa.a /usr/lib//libTILMedia181ClaRa.a /lib//libTILMedia181ClaRa.a /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.a /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib//libTILMedia181ClaRa.a /home/hudson/saved_omc/libraries/.openmodelica/binaries/ClaRa/libTILMedia181ClaRa.a /home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Resources/Library/x86_64-linux/libTILMedia181ClaRa.a /home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Resources/Library/linux64/libTILMedia181ClaRa.a /home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Resources/Library/libTILMedia181ClaRa.a /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.so /usr/lib/x86_64-linux-gnu/libTILMedia181ClaRa.so /lib/x86_64-linux-gnu/libTILMedia181ClaRa.so /usr/lib//libTILMedia181ClaRa.so /lib//libTILMedia181ClaRa.so /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.so /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib//libTILMedia181ClaRa.so /home/hudson/saved_omc/libraries/.openmodelica/binaries/ClaRa/libTILMedia181ClaRa.so /home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Resources/Library/x86_64-linux/libTILMedia181ClaRa.so /home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Resources/Library/linux64/libTILMedia181ClaRa.so /home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Resources/Library/libTILMedia181ClaRa.so [/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-main/Internals/VLEFluidConfigurations/FullyMixtureCompatible/VLEFluid.mo:121:25-122:60:writable] Warning: Could not find library TILMedia181ClaRa in either of: /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.a /usr/lib/x86_64-linux-gnu/libTILMedia181ClaRa.a /lib/x86_64-linux-gnu/libTILMedia181ClaRa.a /usr/lib//libTILMedia181ClaRa.a /lib//libTILMedia181ClaRa.a /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.a /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib//libTILMedia181ClaRa.a /home/hudson/saved_omc/libraries/.openmodelica/binaries/ClaRa/libTILMedia181ClaRa.a /home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Resources/Library/x86_64-linux/libTILMedia181ClaRa.a /home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Resources/Library/linux64/libTILMedia181ClaRa.a /home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Resources/Library/libTILMedia181ClaRa.a /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.so /usr/lib/x86_64-linux-gnu/libTILMedia181ClaRa.so /lib/x86_64-linux-gnu/libTILMedia181ClaRa.so /usr/lib//libTILMedia181ClaRa.so /lib//libTILMedia181ClaRa.so /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.so /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib//libTILMedia181ClaRa.so /home/hudson/saved_omc/libraries/.openmodelica/binaries/ClaRa/libTILMedia181ClaRa.so /home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Resources/Library/x86_64-linux/libTILMedia181ClaRa.so /home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Resources/Library/linux64/libTILMedia181ClaRa.so /home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Resources/Library/libTILMedia181ClaRa.so [/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-main/Internals/VLEFluidConfigurations/FullyMixtureCompatible/VLEFluid.mo:119:25-120:61:writable] Warning: Could not find library TILMedia181ClaRa in either of: /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.a /usr/lib/x86_64-linux-gnu/libTILMedia181ClaRa.a /lib/x86_64-linux-gnu/libTILMedia181ClaRa.a /usr/lib//libTILMedia181ClaRa.a /lib//libTILMedia181ClaRa.a /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.a /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib//libTILMedia181ClaRa.a /home/hudson/saved_omc/libraries/.openmodelica/binaries/ClaRa/libTILMedia181ClaRa.a /home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Resources/Library/x86_64-linux/libTILMedia181ClaRa.a /home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Resources/Library/linux64/libTILMedia181ClaRa.a /home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Resources/Library/libTILMedia181ClaRa.a /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.so /usr/lib/x86_64-linux-gnu/libTILMedia181ClaRa.so /lib/x86_64-linux-gnu/libTILMedia181ClaRa.so /usr/lib//libTILMedia181ClaRa.so /lib//libTILMedia181ClaRa.so /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.so /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib//libTILMedia181ClaRa.so /home/hudson/saved_omc/libraries/.openmodelica/binaries/ClaRa/libTILMedia181ClaRa.so /home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Resources/Library/x86_64-linux/libTILMedia181ClaRa.so /home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Resources/Library/linux64/libTILMedia181ClaRa.so /home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Resources/Library/libTILMedia181ClaRa.so [/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-main/Internals/VLEFluidConfigurations/FullyMixtureCompatible/VLEFluid.mo:121:25-122:60:writable] Warning: Could not find library TILMedia181ClaRa in either of: /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.a /usr/lib/x86_64-linux-gnu/libTILMedia181ClaRa.a /lib/x86_64-linux-gnu/libTILMedia181ClaRa.a /usr/lib//libTILMedia181ClaRa.a /lib//libTILMedia181ClaRa.a /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.a /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib//libTILMedia181ClaRa.a /home/hudson/saved_omc/libraries/.openmodelica/binaries/ClaRa/libTILMedia181ClaRa.a /home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Resources/Library/x86_64-linux/libTILMedia181ClaRa.a /home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Resources/Library/linux64/libTILMedia181ClaRa.a /home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Resources/Library/libTILMedia181ClaRa.a /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.so /usr/lib/x86_64-linux-gnu/libTILMedia181ClaRa.so /lib/x86_64-linux-gnu/libTILMedia181ClaRa.so /usr/lib//libTILMedia181ClaRa.so /lib//libTILMedia181ClaRa.so /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib/x86_64-linux-gnu/omc/libTILMedia181ClaRa.so /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../lib//libTILMedia181ClaRa.so /home/hudson/saved_omc/libraries/.openmodelica/binaries/ClaRa/libTILMedia181ClaRa.so /home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Resources/Library/x86_64-linux/libTILMedia181ClaRa.so /home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Resources/Library/linux64/libTILMedia181ClaRa.so /home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Resources/Library/libTILMedia181ClaRa.so Notification: Performance of Backend phase and start with SimCode phase: time 0.01938/53.22, allocations: 5.195 MB / 13.73 GB, free: 406.2 MB / 1.374 GB [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Basics/ControlVolumes/FluidVolumes/VolumeVLE_L3_TwoZonesNPort.mo:130:3-130:139:writable] Warning: Variable $DER.preheater_LP3.shell.volume_vap has attribute stateSelect=StateSelect.always, but can't be selected as a state. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Basics/ControlVolumes/FluidVolumes/VolumeVLE_L3_TwoZonesNPort.mo:130:3-130:139:writable] Warning: Variable $DER.preheater_LP1.shell.volume_vap has attribute stateSelect=StateSelect.always, but can't be selected as a state. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Basics/ControlVolumes/FluidVolumes/VolumeVLE_L3_TwoZonesNPort.mo:130:3-130:139:writable] Warning: Variable $DER.preheater_LP2.shell.volume_vap has attribute stateSelect=StateSelect.always, but can't be selected as a state. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Basics/ControlVolumes/FluidVolumes/VolumeVLE_L3_TwoZonesNPort.mo:130:3-130:139:writable] Warning: Variable $DER.preheater_HP.shell.volume_vap has attribute stateSelect=StateSelect.always, but can't be selected as a state. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Basics/ControlVolumes/FluidVolumes/VolumeVLE_L3_TwoZonesNPort.mo:130:3-130:139:writable] Warning: Variable $DER.feedWaterTank.volume.volume_vap has attribute stateSelect=StateSelect.always, but can't be selected as a state. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Basics/ControlVolumes/FluidVolumes/VolumeVLE_L3_TwoZonesNPort.mo:130:3-130:139:writable] Warning: Variable $DER.preheater_LP4.shell.volume_vap has attribute stateSelect=StateSelect.always, but can't be selected as a state. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Basics/ControlVolumes/FluidVolumes/VolumeVLE_L3_TwoZonesNPort.mo:130:3-130:139:writable] Warning: Variable $DER.condenser.shell.volume_vap has attribute stateSelect=StateSelect.always, but can't be selected as a state. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Basics/ControlVolumes/FluidVolumes/VolumeVLE_L3_TwoZonesNPort.mo:130:3-130:139:writable] Warning: Variable $DER.preheater_LP3.shell.volume_vap has attribute stateSelect=StateSelect.always, but can't be selected as a state. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Basics/ControlVolumes/FluidVolumes/VolumeVLE_L3_TwoZonesNPort.mo:130:3-130:139:writable] Warning: Variable $DER.preheater_LP1.shell.volume_vap has attribute stateSelect=StateSelect.always, but can't be selected as a state. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Basics/ControlVolumes/FluidVolumes/VolumeVLE_L3_TwoZonesNPort.mo:130:3-130:139:writable] Warning: Variable $DER.preheater_LP2.shell.volume_vap has attribute stateSelect=StateSelect.always, but can't be selected as a state. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Basics/ControlVolumes/FluidVolumes/VolumeVLE_L3_TwoZonesNPort.mo:130:3-130:139:writable] Warning: Variable $DER.preheater_HP.shell.volume_vap has attribute stateSelect=StateSelect.always, but can't be selected as a state. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Basics/ControlVolumes/FluidVolumes/VolumeVLE_L3_TwoZonesNPort.mo:130:3-130:139:writable] Warning: Variable $DER.feedWaterTank.volume.volume_vap has attribute stateSelect=StateSelect.always, but can't be selected as a state. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Basics/ControlVolumes/FluidVolumes/VolumeVLE_L3_TwoZonesNPort.mo:130:3-130:139:writable] Warning: Variable $DER.preheater_LP4.shell.volume_vap has attribute stateSelect=StateSelect.always, but can't be selected as a state. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Basics/ControlVolumes/FluidVolumes/VolumeVLE_L3_TwoZonesNPort.mo:130:3-130:139:writable] Warning: Variable $DER.condenser.shell.volume_vap has attribute stateSelect=StateSelect.always, but can't be selected as a state. Notification: Performance of simCode: created initialization part: time 0.33/53.55, allocations: 190.1 MB / 13.92 GB, free: 292.9 MB / 1.374 GB Notification: Performance of simCode: created event and clocks part: time 0.000144/53.55, allocations: 33.31 kB / 13.92 GB, free: 292.9 MB / 1.374 GB Notification: Performance of simCode: created simulation system equations: time 0.1352/53.69, allocations: 88.9 MB / 14.01 GB, free: 208.8 MB / 1.374 GB Notification: Performance of simCode: created of all other equations (e.g. parameter, nominal, assert, etc): time 0.1296/53.82, allocations: 15.14 MB / 14.02 GB, free: 195.5 MB / 1.374 GB Notification: Performance of simCode: created linear, non-linear and system jacobian parts: time 1.057/54.87, allocations: 178.1 MB / 14.19 GB, free: 335.9 MB / 1.374 GB Notification: Performance of simCode: some other stuff during SimCode phase: time 0.1041/54.98, allocations: 42.19 MB / 14.24 GB, free: 331.7 MB / 1.374 GB Notification: Performance of simCode: alias equations: time 0.109/55.08, allocations: 26.9 MB / 14.26 GB, free: 328.1 MB / 1.374 GB Notification: Performance of simCode: all other stuff during SimCode phase: time 0.03301/55.12, allocations: 7.257 MB / 14.27 GB, free: 327.8 MB / 1.374 GB Notification: Performance of SimCode: time 9.62e-07/55.12, allocations: 0 / 14.27 GB, free: 327.8 MB / 1.374 GB Notification: Performance of Templates: time 3.261/58.38, allocations: 1.126 GB / 15.4 GB, free: 228.1 MB / 1.405 GB make -j1 -f ClaRa_ClaRa.Examples.SteamCycle_02.makefile (rm -f ClaRa_ClaRa.Examples.SteamCycle_02.pipe ; mkfifo ClaRa_ClaRa.Examples.SteamCycle_02.pipe ; head -c 1048576 < ClaRa_ClaRa.Examples.SteamCycle_02.pipe >> ../files/ClaRa_ClaRa.Examples.SteamCycle_02.sim & ./ClaRa_ClaRa.Examples.SteamCycle_02 -abortSlowSimulation -alarm=480 -emit_protected -lv LOG_STATS > ClaRa_ClaRa.Examples.SteamCycle_02.pipe 2>&1)