Environment - simulationEnvironment:
startTime=0
stopTime=3.1536e+07
tolerance=1e-06
numberOfIntervals=2500
stepSize=12614.4
Regular simulation: ./BuildingSystems_BuildingSystems.Applications.SolarThermalSystems.SolarThermalSystem2  -abortSlowSimulation -alarm=480 -lv LOG_STATS
LOG_STDOUT        | info    | ... loading "tab1" from "/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Climate/weather/Egypt_ElGouna.txt"
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:417:3-426:39:writable]
|                 | |       | The following assertion has been violated during initialization at time 0.000000
|                 | |       | ((not (pump1.per.etaHydMet == BuildingSystems.Fluid.Movers.BaseClasses.Types.HydraulicEfficiencyMethod.Power_VolumeFlowRate or pump1.per.etaHydMet == BuildingSystems.Fluid.Movers.BaseClasses.Types.HydraulicEfficiencyMethod.EulerNumber))) --> "*** Warning in SolarThermalSystem2.pump1: Mover has per.etaHydMet=.Power_VolumeFlowRate or per.etaHydMet=.EulerNumber.
|                 | |       | This requires per.pressure to be provided.
|                 | |       | Because it is not, the model overrides this setting by using per.etaHydMet=.NotProvided."
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:428:3-437:39:writable]
|                 | |       | The following assertion has been violated during initialization at time 0.000000
|                 | |       | ((pump1.per.haveWMot_nominal or not (pump1.per.etaMotMet == BuildingSystems.Fluid.Movers.BaseClasses.Types.MotorEfficiencyMethod.Efficiency_MotorPartLoadRatio or pump1.per.etaMotMet == BuildingSystems.Fluid.Movers.BaseClasses.Types.MotorEfficiencyMethod.GenericCurve))) --> "*** Warning in SolarThermalSystem2.pump1: Mover has per.etaMotMet=.Efficiency_MotorPartLoadRatio or per.etaMotMet=.GenericCurve.
|                 | |       | This requires per.WMot_nominal or per.pressure to be provided. Because neither is provided,
|                 | |       | the model overrides this setting and by using per.etaMotMet=.NotProvided."
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:417:3-426:39:writable]
|                 | |       | The following assertion has been violated during initialization at time 0.000000
|                 | |       | ((not (pump2.per.etaHydMet == BuildingSystems.Fluid.Movers.BaseClasses.Types.HydraulicEfficiencyMethod.Power_VolumeFlowRate or pump2.per.etaHydMet == BuildingSystems.Fluid.Movers.BaseClasses.Types.HydraulicEfficiencyMethod.EulerNumber))) --> "*** Warning in SolarThermalSystem2.pump2: Mover has per.etaHydMet=.Power_VolumeFlowRate or per.etaHydMet=.EulerNumber.
|                 | |       | This requires per.pressure to be provided.
|                 | |       | Because it is not, the model overrides this setting by using per.etaHydMet=.NotProvided."
LOG_ASSERT        | warning | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:428:3-437:39:writable]
|                 | |       | The following assertion has been violated during initialization at time 0.000000
|                 | |       | ((pump2.per.haveWMot_nominal or not (pump2.per.etaMotMet == BuildingSystems.Fluid.Movers.BaseClasses.Types.MotorEfficiencyMethod.Efficiency_MotorPartLoadRatio or pump2.per.etaMotMet == BuildingSystems.Fluid.Movers.BaseClasses.Types.MotorEfficiencyMethod.GenericCurve))) --> "*** Warning in SolarThermalSystem2.pump2: Mover has per.etaMotMet=.Efficiency_MotorPartLoadRatio or per.etaMotMet=.GenericCurve.
|                 | |       | This requires per.WMot_nominal or per.pressure to be provided. Because neither is provided,
|                 | |       | the model overrides this setting and by using per.etaMotMet=.NotProvided."
LOG_SUCCESS       | info    | The initialization finished successfully without homotopy method.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 26320.895552
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.4 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 26320.895552
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.4 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 26320.895552
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.4 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 26992.162800
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.6 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 26992.162800
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.6 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 26992.162800
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.6 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 27609.268707
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.5 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 27609.268707
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.5 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 27609.268707
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.5 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 28159.531955
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.6 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 28159.531955
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.6 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 28159.531955
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.6 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 28663.086887
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.6 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 28663.086887
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.6 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 28663.086887
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.6 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 29131.426188
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.7 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 29131.426188
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.7 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 29131.426188
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.7 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 29571.523127
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.9 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 29571.523127
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.9 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 29571.523127
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.9 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 29988.775928
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.1 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 29988.775928
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.1 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 29988.775928
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.1 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 30386.709370
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.3 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 30386.709370
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.3 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 30386.709370
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.3 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 30768.225837
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.3 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 30768.225837
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.3 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 30768.225837
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.3 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 31135.504576
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.5 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 31135.504576
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.5 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 31135.504576
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.5 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 31489.873582
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.5 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 31489.873582
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.5 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 31489.873582
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.5 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 31833.039025
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 31833.039025
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 31833.039025
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 32166.052685
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 32166.052685
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 32166.052685
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 32493.497125
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56498.9 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 32493.497125
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56498.9 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 32493.497125
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56498.9 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 32695.380429
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.2 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 32695.380429
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.2 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 32695.380429
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.2 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 32882.825529
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.4 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 32882.825529
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.4 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 32882.825529
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.4 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33059.180156
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.6 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33059.180156
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.6 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33059.180156
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.6 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33227.116683
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.6 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33227.116683
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.6 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33227.116683
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.6 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33388.534441
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.7 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33388.534441
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.7 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33388.534441
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.7 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33544.841679
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.7 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33544.841679
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.7 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33544.841679
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.7 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33697.236221
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33697.236221
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33697.236221
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33846.740215
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33846.740215
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33846.740215
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33994.384322
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33994.384322
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33994.384322
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 34141.380236
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 34141.380236
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 34141.380236
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 34289.489007
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 34289.489007
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 34289.489007
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 34444.396304
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 34444.396304
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 34444.396304
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 37843.200000
|                 | |       | (((-pump1.dp) <= 4e4)) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | error   | No event found, but assert was triggered. Throwing now!