Running: ./testmodel.py --libraries=/home/hudson/saved_omc/libraries/.openmodelica/libraries --ompython_omhome=/usr TransiEnt_TransiEnt.Basics.Blocks.Check.CompareSlewRateLimiters.conf.json
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/DymolaCommands master/package.mo", uses=false) [Timeout 180]
"Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/DymolaCommands master/package.mo): time 0.0003395/0.0003395, allocations: 24.45 kB / 9.873 MB, free: 0.8203 MB / 10.45 MB
Notification: Performance of NFInstanceAPI.mkTop(<interactive>): time 0.0008226/0.001162, allocations: 421.9 kB / 10.28 MB, free: 420 kB / 10.45 MB
"
[Timeout remaining time 180]
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/package.mo", uses=false) [Timeout 180]
"[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Control/PredictorModels_3508/Check/package.mo:2:1-21:10:writable] Warning: The package.order file contains a class TestReheater, which is expected to be stored in file TestReheater.mo, but seems to be named testReheater.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Control/PredictorModels_3508/Check/testReheater.mo:2:1-117:17:writable] Warning: Expected the package to have name testReheater, but got TestReheater. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/package.mo:2:1-23:10:writable] Warning: PhysicalMills was referenced in the package.order file, but was not found in package.mo, PhysicalMills/package.mo or PhysicalMills.mo.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/package.mo:2:1-22:18:writable] Warning: Expected the package to have name physicalMills, but got PhysicalMills. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/package.mo:2:1-22:18:writable] Warning: The package.order file contains a class Mill_L4_advancedInit, which is expected to be stored in file Mill_L4_advancedInit.mo, but seems to be named mill_L4_advancedInit.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/package.mo:2:1-22:18:writable] Warning: The package.order file contains a class Mill_L4, which is expected to be stored in file Mill_L4.mo, but seems to be named mill_L4.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/mill_L4_advancedInit.mo:2:1-58:25:writable] Warning: Expected the package to have name mill_L4_advancedInit, but got Mill_L4_advancedInit. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/mill_L4_advancedInit.mo:2:1-58:25:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills; but got within ClaRa.Components.Mills.PhysicalMills; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/mill_L4.mo:2:1-315:12:writable] Warning: Expected the package to have name mill_L4, but got Mill_L4. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/mill_L4.mo:2:1-315:12:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills; but got within ClaRa.Components.Mills.PhysicalMills; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/package.mo:2:1-21:10:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills; but got within ClaRa.Components.Mills.PhysicalMills; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/package.mo:2:1-21:10:writable] Warning: The package.order file contains a class TestMillBox_2, which is expected to be stored in file TestMillBox_2.mo, but seems to be named testMillBox_2.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/package.mo:2:1-21:10:writable] Warning: The package.order file contains a class TestMillBox_1_measurementInput, which is expected to be stored in file TestMillBox_1_measurementInput.mo, but seems to be named testMillBox_1_measurementInput.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/package.mo:2:1-21:10:writable] Warning: The package.order file contains a class TestMillBox_1, which is expected to be stored in file TestMillBox_1.mo, but seems to be named testMillBox_1.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/testMillBox_2.mo:2:1-297:18:writable] Warning: Expected the package to have name testMillBox_2, but got TestMillBox_2. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/testMillBox_2.mo:2:1-297:18:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Check; but got within ClaRa.Components.Mills.PhysicalMills.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/testMillBox_1_measurementInput.mo:2:1-1342:35:writable] Warning: Expected the package to have name testMillBox_1_measurementInput, but got TestMillBox_1_measurementInput. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/testMillBox_1_measurementInput.mo:2:1-1342:35:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Check; but got within ClaRa.Components.Mills.PhysicalMills.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/testMillBox_1.mo:2:1-465:18:writable] Warning: Expected the package to have name testMillBox_1, but got TestMillBox_1. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/testMillBox_1.mo:2:1-465:18:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Check; but got within ClaRa.Components.Mills.PhysicalMills.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/package.mo:2:1-29:12:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills; but got within ClaRa.Components.Mills.PhysicalMills; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/FlowClassifier.mo:2:1-346:19:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/CentrifugalClassifier.mo:2:1-380:26:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/GrinderRingRoller.mo:2:1-294:22:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/FuelJoin_distributed.mo:2:1-133:25:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Dryer.mo:2:1-301:10:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/package.mo:2:1-20:17:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/package.mo:2:1-20:13:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Transport_Velocity/package.mo:2:1-20:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Transport_Velocity/Transport_complex.mo:2:1-71:22:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Transport_Velocity/Transport_constant.mo:2:1-49:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Transport_Velocity/Transport_base.mo:2:1-52:19:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Selection_Function/package.mo:2:1-20:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Selection_Function/Selection_Kersting.mo:2:1-80:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Selection_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Selection_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Selection_Function/Selection_Steinmetz.mo:2:1-104:24:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Selection_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Selection_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Selection_Function/Selection_constant.mo:2:1-45:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Selection_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Selection_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Selection_Function/Selection_base.mo:2:1-50:19:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Selection_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Selection_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Breakage_Function/package.mo:2:1-20:22:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Breakage_Function/Breakage_Austin.mo:2:1-109:20:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Breakage_Function/Breakage_Steinmetz.mo:2:1-106:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Breakage_Function/Breakage_constant.mo:2:1-45:22:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Breakage_Function/Breakage_base.mo:2:1-51:18:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Drying/package.mo:2:1-20:11:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Drying/Drying_ideal.mo:2:1-58:17:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Drying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Drying; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Drying/Drying_base.mo:2:1-44:16:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Drying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Drying; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Classifying/package.mo:2:1-20:16:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Classifying/Classifying_flow.mo:2:1-111:21:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Classifying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Classifying; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Classifying/Classifying_centrifugal.mo:2:1-153:28:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Classifying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Classifying; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Classifying/Classifying_centrifugal_base.mo:2:1-45:33:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Classifying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Classifying; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Classifying/Classifying_flow_base.mo:2:1-45:26:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Classifying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Classifying; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/package.mo:2:1-20:12:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/iCom_Dryer.mo:2:1-57:15:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/iCom_FlowClassifier.mo:2:1-67:24:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/iCom_CentrifugalClassifier.mo:2:1-69:31:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/iCom_Grinder.mo:2:1-61:17:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/FuelClassification_example_21classes.mo:2:1-43:41:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/GeometricProgression.mo:2:1-56:25:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/FuelClassification_generic.mo:2:1-43:31:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/FuelClassification_example_05classes.mo:2:1-43:41:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/FuelClassification_example_11classes.mo:2:1-43:41:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/FuelClassification_base.mo:2:1-61:28:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/package.mo:2:1-23:10:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/package.mo:2:1-23:10:writable] Warning: The package.order file contains a class TestFuelJoin, which is expected to be stored in file TestFuelJoin.mo, but seems to be named testFuelJoin.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/package.mo:2:1-23:10:writable] Warning: The package.order file contains a class TestAerosolVolume, which is expected to be stored in file TestAerosolVolume.mo, but seems to be named testAerosolVolume.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/package.mo:2:1-23:10:writable] Warning: The package.order file contains a class TestDryer, which is expected to be stored in file TestDryer.mo, but seems to be named testDryer.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/package.mo:2:1-23:10:writable] Warning: The package.order file contains a class TestGrinder, which is expected to be stored in file TestGrinder.mo, but seems to be named testGrinder.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testFuelJoin.mo:2:1-93:17:writable] Warning: Expected the package to have name testFuelJoin, but got TestFuelJoin. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testFuelJoin.mo:2:1-93:17:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Check; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testAerosolVolume.mo:2:1-176:22:writable] Warning: Expected the package to have name testAerosolVolume, but got TestAerosolVolume. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testAerosolVolume.mo:2:1-176:22:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Check; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testDryer.mo:2:1-93:14:writable] Warning: Expected the package to have name testDryer, but got TestDryer. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testDryer.mo:2:1-93:14:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Check; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testGrinder.mo:2:1-154:16:writable] Warning: Expected the package to have name testGrinder, but got TestGrinder. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testGrinder.mo:2:1-154:16:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Check; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/package.mo): time 0.5245/0.5245, allocations: 100.7 MB / 111.7 MB, free: 14.51 MB / 122.8 MB
Notification: Performance of NFInstanceAPI.mkTop(<interactive>): time 0.0736/0.5981, allocations: 28.09 MB / 139.8 MB, free: 6.16 MB / 138.8 MB
"
[Timeout remaining time 179]
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-ClaRa/package.mo", uses=false) [Timeout 180]
"Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-ClaRa/package.mo): time 0.06076/0.06076, allocations: 16.04 MB / 156.7 MB, free: 5.699 MB / 154.8 MB
Notification: Performance of NFInstanceAPI.mkTop(<interactive>): time 0.008526/0.06929, allocations: 6.784 MB / 163.5 MB, free: 14.9 MB / 170.8 MB
"
[Timeout remaining time 180]
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.1.0+maint.om/package.mo", uses=false) [Timeout 180]
"Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.1.0+maint.om/package.mo): time 0.000576/0.000576, allocations: 80.89 kB / 164.3 MB, free: 14.09 MB / 170.8 MB
Notification: Performance of NFInstanceAPI.mkTop(<interactive>): time 0.0009561/0.001532, allocations: 446.2 kB / 164.8 MB, free: 13.65 MB / 170.8 MB
"
[Timeout remaining time 180]
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.1.0+maint.om/package.mo", uses=false) [Timeout 180]
"Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.1.0+maint.om/package.mo): time 0.0006998/0.0006998, allocations: 148.6 kB / 165.7 MB, free: 12.76 MB / 170.8 MB
Notification: Performance of NFInstanceAPI.mkTop(<interactive>): time 0.0009617/0.001662, allocations: 487 kB / 166.1 MB, free: 12.29 MB / 170.8 MB
"
[Timeout remaining time 180]
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.1.0+maint.om/package.mo", uses=false) [Timeout 180]
"Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.1.0+maint.om/package.mo): time 0.9115/0.9115, allocations: 177.1 MB / 344 MB, free: 6.082 MB / 330.8 MB
Notification: Performance of NFInstanceAPI.mkTop(<interactive>): time 0.07265/0.9841, allocations: 53.68 MB / 397.7 MB, free: 308 kB / 378.8 MB
"
[Timeout remaining time 179]
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.2/package.mo", uses=false) [Timeout 180]
"Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.2/package.mo): time 1.918/1.918, allocations: 376.9 MB / 0.7572 GB, free: 10.25 MB / 0.7293 GB
Notification: Performance of NFInstanceAPI.mkTop(<interactive>): time 0.1807/2.099, allocations: 123.2 MB / 0.8775 GB, free: 15.06 MB / 0.8543 GB
"
[Timeout remaining time 178]
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.3-master/package.mo", uses=false) [Timeout 180]
"[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.3-master/Basics/Interfaces/Thermal/package.mo:2:1-91:12:writable] Warning: The package.order file contains a class FluidPortOut_simple, which is expected to be stored in file FluidPortOut_simple.mo, but seems to be named fluidPortOut_simple.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.3-master/Basics/Interfaces/Thermal/package.mo:2:1-91:12:writable] Warning: The package.order file contains a class FluidPortIn_simple, which is expected to be stored in file FluidPortIn_simple.mo, but seems to be named fluidPortIn_simple.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.3-master/Basics/Interfaces/Thermal/fluidPortOut_simple.mo:2:1-49:24:writable] Warning: Expected the package to have name fluidPortOut_simple, but got FluidPortOut_simple. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.3-master/Basics/Interfaces/Thermal/fluidPortIn_simple.mo:2:1-50:23:writable] Warning: Expected the package to have name fluidPortIn_simple, but got FluidPortIn_simple. Proceeding since only the case of the names are different.
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.3-master/package.mo): time 1.678/1.678, allocations: 241.5 MB / 1.114 GB, free: 3.137 MB / 1.058 GB
Notification: Performance of NFInstanceAPI.mkTop(<interactive>): time 0.1022/1.78, allocations: 70.6 MB / 1.183 GB, free: 15.98 MB / 1.136 GB
"
[Timeout remaining time 178]
Using package TransiEnt with version 2.0.3 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.3-master/package.mo)
Using package Buildings with version 12.1.2 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.2/package.mo)
Using package Modelica with version 4.1.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.1.0+maint.om/package.mo)
Using package Complex with version 4.1.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.1.0+maint.om/package.mo)
Using package ModelicaServices with version 4.1.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.1.0+maint.om/package.mo)
Using package TILMedia with version 1.8.1 ClaRa (/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-ClaRa/package.mo)
Using package ClaRa with version 1.8.1 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/package.mo)
Using package DymolaCommands with version 0.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/DymolaCommands master/package.mo)
Running command: setCommandLineOptions("--fmiFlags=s:cvode")
Running command: "" <> buildModelFMU(TransiEnt.Basics.Blocks.Check.CompareSlewRateLimiters,fileNamePrefix="TransiEnt_TransiEnt_Basics_Blocks_Check_CompareSlewRateLimiters",fmuType="me_cs",version="2.0+3.0",platforms={"static"})
"" <> buildModelFMU(TransiEnt.Basics.Blocks.Check.CompareSlewRateLimiters,fileNamePrefix="TransiEnt_TransiEnt_Basics_Blocks_Check_CompareSlewRateLimiters",fmuType="me_cs",version="2.0+3.0",platforms={"static"}) [Timeout 660]
"Notification: Performance of FrontEnd - loaded program: time 1.323e-06/1.323e-06, allocations: 0 / 1.185 GB, free: 14.29 MB / 1.136 GB
Notification: Performance of FrontEnd - Absyn->SCode: time 9.668e-06/1.099e-05, allocations: 2.312 kB / 1.185 GB, free: 14.29 MB / 1.136 GB
Notification: Performance of NFInst.instantiate(TransiEnt.Basics.Blocks.Check.CompareSlewRateLimiters): time 0.002383/0.002394, allocations: 2.914 MB / 1.188 GB, free: 11.36 MB / 1.136 GB
Notification: Performance of NFInst.instExpressions: time 0.001015/0.003409, allocations: 0.9303 MB / 1.188 GB, free: 10.43 MB / 1.136 GB
Notification: Performance of NFInst.updateImplicitVariability: time 6.985e-05/0.003479, allocations: 7.938 kB / 1.188 GB, free: 10.42 MB / 1.136 GB
Notification: Performance of NFTyping.typeComponents: time 0.000121/0.0036, allocations: 83.75 kB / 1.189 GB, free: 10.34 MB / 1.136 GB
Notification: Performance of NFTyping.typeBindings: time 8.564e-05/0.003685, allocations: 99.55 kB / 1.189 GB, free: 10.24 MB / 1.136 GB
Notification: Performance of NFTyping.typeClassSections: time 0.0005688/0.004254, allocations: 219.2 kB / 1.189 GB, free: 10.02 MB / 1.136 GB
Notification: Performance of NFFlatten.flatten: time 0.0001972/0.004451, allocations: 195.5 kB / 1.189 GB, free: 9.832 MB / 1.136 GB
Notification: Performance of NFFlatten.resolveConnections: time 8.16e-05/0.004533, allocations: 25.88 kB / 1.189 GB, free: 9.805 MB / 1.136 GB
Notification: Performance of NFEvalConstants.evaluate: time 0.0001316/0.004665, allocations: 127.8 kB / 1.189 GB, free: 9.68 MB / 1.136 GB
Notification: Performance of NFSimplifyModel.simplify: time 0.0001411/0.004806, allocations: 107.7 kB / 1.189 GB, free: 9.574 MB / 1.136 GB
Notification: Performance of NFPackage.collectConstants: time 1.923e-05/0.004825, allocations: 12 kB / 1.189 GB, free: 9.562 MB / 1.136 GB
Notification: Performance of NFFlatten.collectFunctions: time 0.0001299/0.004955, allocations: 91.92 kB / 1.189 GB, free: 9.473 MB / 1.136 GB
Notification: Performance of NFScalarize.scalarize: time 5.541e-05/0.00501, allocations: 35.86 kB / 1.189 GB, free: 9.438 MB / 1.136 GB
Notification: Performance of NFVerifyModel.verify: time 5.017e-05/0.00506, allocations: 35.88 kB / 1.189 GB, free: 9.402 MB / 1.136 GB
Notification: Performance of NFConvertDAE.convert: time 0.0001952/0.005256, allocations: 167.4 kB / 1.19 GB, free: 9.238 MB / 1.136 GB
Notification: Performance of FrontEnd - DAE generated: time 1.637e-05/0.005272, allocations: 11.92 kB / 1.19 GB, free: 9.227 MB / 1.136 GB
Notification: Performance of FrontEnd: time 8.11e-07/0.005273, allocations: 4 kB / 1.19 GB, free: 9.223 MB / 1.136 GB
Notification: Performance of Transformations before backend: time 9.698e-06/0.005283, allocations: 0 / 1.19 GB, free: 9.223 MB / 1.136 GB
Notification: Model statistics after passing the front-end and creating the data structures used by the back-end:
 * Number of equations: 22
 * Number of variables: 22
Notification: Performance of Generate backend data structure: time 0.0005288/0.005811, allocations: 0.4948 MB / 1.19 GB, free: 8.691 MB / 1.136 GB
Notification: Performance of prepare preOptimizeDAE: time 2.926e-05/0.005841, allocations: 8.031 kB / 1.19 GB, free: 8.684 MB / 1.136 GB
Notification: Performance of preOpt introduceOutputAliases (simulation): time 3.285e-05/0.005873, allocations: 34.75 kB / 1.19 GB, free: 8.641 MB / 1.136 GB
Notification: Performance of preOpt normalInlineFunction (simulation): time 3.747e-05/0.005911, allocations: 36.91 kB / 1.19 GB, free: 8.605 MB / 1.136 GB
Notification: Performance of preOpt evaluateParameters (simulation): time 0.0001549/0.006066, allocations: 172.9 kB / 1.19 GB, free: 8.406 MB / 1.136 GB
Notification: Performance of preOpt simplifyIfEquations (simulation): time 1.143e-05/0.006077, allocations: 12.31 kB / 1.19 GB, free: 8.395 MB / 1.136 GB
Notification: Performance of preOpt expandDerOperator (simulation): time 1.943e-05/0.006097, allocations: 12.38 kB / 1.19 GB, free: 8.383 MB / 1.136 GB
Notification: Performance of preOpt clockPartitioning (simulation): time 0.0001872/0.006284, allocations: 233.9 kB / 1.191 GB, free: 8.121 MB / 1.136 GB
Notification: Performance of preOpt findStateOrder (simulation): time 7.314e-06/0.006291, allocations: 0 / 1.191 GB, free: 8.121 MB / 1.136 GB
Notification: Performance of preOpt replaceEdgeChange (simulation): time 1.019e-05/0.006301, allocations: 4 kB / 1.191 GB, free: 8.117 MB / 1.136 GB
Notification: Performance of preOpt inlineArrayEqn (simulation): time 3.687e-06/0.006305, allocations: 0 / 1.191 GB, free: 8.117 MB / 1.136 GB
Notification: Performance of preOpt removeEqualRHS (simulation): time 8.711e-05/0.006392, allocations: 98.2 kB / 1.191 GB, free: 8.008 MB / 1.136 GB
Notification: Performance of preOpt removeSimpleEquations (simulation): time 0.0003446/0.006737, allocations: 270.2 kB / 1.191 GB, free: 7.715 MB / 1.136 GB
Notification: Performance of preOpt comSubExp (simulation): time 0.0001702/0.006907, allocations: 165.8 kB / 1.191 GB, free: 7.531 MB / 1.136 GB
Notification: Performance of preOpt resolveLoops (simulation): time 5.568e-05/0.006963, allocations: 92.25 kB / 1.191 GB, free: 7.426 MB / 1.136 GB
Notification: Performance of preOpt evalFunc (simulation): time 2.066e-05/0.006983, allocations: 8 kB / 1.191 GB, free: 7.418 MB / 1.136 GB
Notification: Performance of preOpt encapsulateWhenConditions (simulation): time 0.0001695/0.007153, allocations: 270.6 kB / 1.191 GB, free: 7.109 MB / 1.136 GB
Notification: Performance of pre-optimization done (n=19): time 1.072e-06/0.007154, allocations: 0 / 1.191 GB, free: 7.109 MB / 1.136 GB
Notification: Performance of matching and sorting (n=19): time 0.0003031/0.007457, allocations: 362.6 kB / 1.192 GB, free: 6.715 MB / 1.136 GB
Notification: Performance of inlineWhenForInitialization (initialization): time 6.561e-05/0.007523, allocations: 199.8 kB / 1.192 GB, free: 6.477 MB / 1.136 GB
Notification: Performance of selectInitializationVariablesDAE (initialization): time 9.871e-05/0.007621, allocations: 209 kB / 1.192 GB, free: 6.262 MB / 1.136 GB
Notification: Performance of collectPreVariables (initialization): time 1.563e-05/0.007637, allocations: 33.7 kB / 1.192 GB, free: 6.223 MB / 1.136 GB
Notification: Performance of collectInitialEqns (initialization): time 3.292e-05/0.00767, allocations: 104.5 kB / 1.192 GB, free: 6.117 MB / 1.136 GB
Notification: Performance of collectInitialBindings (initialization): time 3.53e-05/0.007705, allocations: 51.56 kB / 1.192 GB, free: 6.066 MB / 1.136 GB
Notification: Performance of simplifyInitialFunctions (initialization): time 4.423e-05/0.007749, allocations: 45.67 kB / 1.192 GB, free: 6.016 MB / 1.136 GB
Notification: Performance of setup shared object (initialization): time 6.931e-05/0.007819, allocations: 342.8 kB / 1.193 GB, free: 5.672 MB / 1.136 GB
Notification: Performance of preBalanceInitialSystem (initialization): time 4.862e-05/0.007867, allocations: 87.08 kB / 1.193 GB, free: 5.57 MB / 1.136 GB
Notification: Performance of partitionIndependentBlocks (initialization): time 7.325e-05/0.007941, allocations: 167 kB / 1.193 GB, free: 5.367 MB / 1.136 GB
Notification: Performance of analyzeInitialSystem (initialization): time 0.0001373/0.008078, allocations: 247.4 kB / 1.193 GB, free: 5.078 MB / 1.136 GB
Notification: Performance of solveInitialSystemEqSystem (initialization): time 1.983e-06/0.00808, allocations: 7.969 kB / 1.193 GB, free: 5.07 MB / 1.136 GB
Notification: Performance of matching and sorting (n=26) (initialization): time 0.0001591/0.008239, allocations: 263 kB / 1.193 GB, free: 4.781 MB / 1.136 GB
Notification: Performance of prepare postOptimizeDAE: time 4.124e-05/0.00828, allocations: 67.39 kB / 1.194 GB, free: 4.703 MB / 1.136 GB
Notification: Performance of postOpt simplifyComplexFunction (initialization): time 3.947e-06/0.008284, allocations: 0 / 1.194 GB, free: 4.703 MB / 1.136 GB
Notification: Performance of postOpt tearingSystem (initialization): time 9.367e-06/0.008294, allocations: 7.938 kB / 1.194 GB, free: 4.695 MB / 1.136 GB
Notification: Performance of postOpt solveSimpleEquations (initialization): time 7.846e-05/0.008372, allocations: 31.98 kB / 1.194 GB, free: 4.664 MB / 1.136 GB
Notification: Performance of postOpt calculateStrongComponentJacobians (initialization): time 4.96e-06/0.008377, allocations: 3.938 kB / 1.194 GB, free: 4.66 MB / 1.136 GB
Notification: Performance of postOpt simplifyAllExpressions (initialization): time 5.692e-05/0.008434, allocations: 23.88 kB / 1.194 GB, free: 4.637 MB / 1.136 GB
Notification: Performance of postOpt collapseArrayExpressions (initialization): time 1.11e-05/0.008445, allocations: 12.16 kB / 1.194 GB, free: 4.625 MB / 1.136 GB
Warning: Assuming fixed start value for the following 4 variables:
         SlewRateLimiter.y:DISCRETE(flow=false fixed = true )  \"Connector of Real output signal\" type: Real
         SlewRateLimiter.y_limited_by_rate:DISCRETE(fixed = true )  \"Limited value without absolute value limit\" type: Real
         SlewRateLimiter.y_rcbl_by_rate_min:DISCRETE(fixed = true )  \"Reachable output in next step if input is only limited by falling rate\" type: Real
         SlewRateLimiter.y_rcbl_by_rate_max:DISCRETE(fixed = true )  \"Reachable output in next step if input is only limited by rising rate\" type: Real
Notification: Performance of preBalanceInitialSystem (initialization_lambda0): time 0.0001153/0.00856, allocations: 178.5 kB / 1.194 GB, free: 4.43 MB / 1.136 GB
Notification: Performance of partitionIndependentBlocks (initialization_lambda0): time 6.885e-05/0.008629, allocations: 167.9 kB / 1.194 GB, free: 4.223 MB / 1.136 GB
Notification: Performance of analyzeInitialSystem (initialization_lambda0): time 0.0001242/0.008753, allocations: 255.4 kB / 1.194 GB, free: 3.926 MB / 1.136 GB
Notification: Performance of solveInitialSystemEqSystem (initialization_lambda0): time 7.61e-07/0.008754, allocations: 0 / 1.194 GB, free: 3.926 MB / 1.136 GB
Notification: Performance of matching and sorting (n=26) (initialization_lambda0): time 0.0001459/0.0089, allocations: 255.1 kB / 1.194 GB, free: 3.645 MB / 1.136 GB
Notification: Performance of prepare postOptimizeDAE: time 2.518e-05/0.008925, allocations: 71.39 kB / 1.194 GB, free: 3.562 MB / 1.136 GB
Notification: Performance of postOpt simplifyComplexFunction (initialization): time 1.783e-06/0.008927, allocations: 0 / 1.194 GB, free: 3.562 MB / 1.136 GB
Notification: Performance of postOpt tearingSystem (initialization): time 3.977e-06/0.008931, allocations: 11.94 kB / 1.194 GB, free: 3.551 MB / 1.136 GB
Notification: Performance of postOpt solveSimpleEquations (initialization): time 4.803e-05/0.008979, allocations: 27.98 kB / 1.195 GB, free: 3.523 MB / 1.136 GB
Notification: Performance of postOpt calculateStrongComponentJacobians (initialization): time 3.005e-06/0.008982, allocations: 3.938 kB / 1.195 GB, free: 3.52 MB / 1.136 GB
Notification: Performance of postOpt simplifyAllExpressions (initialization): time 4.744e-05/0.009029, allocations: 24.08 kB / 1.195 GB, free: 3.496 MB / 1.136 GB
Notification: Performance of postOpt collapseArrayExpressions (initialization): time 8.566e-06/0.009038, allocations: 8 kB / 1.195 GB, free: 3.488 MB / 1.136 GB
Warning: Assuming fixed start value for the following 4 variables:
         SlewRateLimiter.y:DISCRETE(flow=false fixed = true )  \"Connector of Real output signal\" type: Real
         SlewRateLimiter.y_limited_by_rate:DISCRETE(fixed = true )  \"Limited value without absolute value limit\" type: Real
         SlewRateLimiter.y_rcbl_by_rate_min:DISCRETE(fixed = true )  \"Reachable output in next step if input is only limited by falling rate\" type: Real
         SlewRateLimiter.y_rcbl_by_rate_max:DISCRETE(fixed = true )  \"Reachable output in next step if input is only limited by rising rate\" type: Real
Notification: Model statistics after passing the back-end for initialization:
 * Number of independent subsystems: 7
 * Number of states: 0 ()
 * Number of discrete variables: 21 ($PRE.SlewRateLimiter.y,SlewRateLimiter.y,$PRE.SlewRateLimiter.y_limited_by_rate,SlewRateLimiter.y_limited_by_rate,$PRE.SlewRateLimiter.y_rcbl_by_rate_min,SlewRateLimiter.y_rcbl_by_rate_min,$PRE.SlewRateLimiter.y_rcbl_by_rate_max,SlewRateLimiter.y_rcbl_by_rate_max,SlewRateLimiter.firstTrigger,$PRE.SlewRateLimiter.firstTrigger,SlewRateLimiter.sampleTrigger,$whenCondition4,$whenCondition3,$whenCondition1,Testdata.nextEventScaled,Testdata.nextEvent,$PRE.Testdata.nextEvent,Testdata.last,Testdata.b,Testdata.a,$whenCondition2)
 * Number of discrete states: 0 ()
 * Number of clocked states: 0 ()
 * Top-level inputs: 0
Notification: Strong component statistics for initialization (20):
 * Single equations (assignments): 18
 * Array equations: 0
 * Algorithm blocks: 2
 * Record equations: 0
 * When equations: 0
 * If-equations: 0
 * Equation systems (not torn): 0
 * Torn equation systems: 0
 * Mixed (continuous/discrete) equation systems: 0
Notification: Performance of prepare postOptimizeDAE: time 0.0001054/0.009143, allocations: 276.7 kB / 1.195 GB, free: 3.203 MB / 1.136 GB
Notification: Performance of postOpt lateInlineFunction (simulation): time 2.662e-05/0.00917, allocations: 31.97 kB / 1.195 GB, free: 3.172 MB / 1.136 GB
Notification: Performance of postOpt wrapFunctionCalls (simulation): time 2.662e-05/0.009197, allocations: 18.11 kB / 1.195 GB, free: 3.156 MB / 1.136 GB
Notification: Performance of postOpt inlineArrayEqn (simulation): time 2.815e-06/0.009199, allocations: 7.938 kB / 1.195 GB, free: 3.148 MB / 1.136 GB
Notification: Performance of postOpt constantLinearSystem (simulation): time 1.593e-06/0.009201, allocations: 0 / 1.195 GB, free: 3.148 MB / 1.136 GB
Notification: Performance of postOpt simplifysemiLinear (simulation): time 3.096e-06/0.009204, allocations: 0 / 1.195 GB, free: 3.148 MB / 1.136 GB
Notification: Performance of postOpt removeSimpleEquations (simulation): time 0.0003686/0.009573, allocations: 0.5592 MB / 1.195 GB, free: 2.527 MB / 1.136 GB
Notification: Performance of postOpt simplifyComplexFunction (simulation): time 8.81e-07/0.009574, allocations: 0 / 1.195 GB, free: 2.527 MB / 1.136 GB
Notification: Performance of postOpt solveSimpleEquations (simulation): time 4.375e-05/0.009617, allocations: 12 kB / 1.195 GB, free: 2.516 MB / 1.136 GB
Notification: Performance of postOpt removeConstants (simulation): time 1.813e-05/0.009636, allocations: 27.78 kB / 1.195 GB, free: 2.488 MB / 1.136 GB
Notification: Performance of postOpt tearingSystem (simulation): time 1.212e-06/0.009637, allocations: 0 / 1.195 GB, free: 2.488 MB / 1.136 GB
Notification: Performance of postOpt inputDerivativesUsed (simulation): time 1.509e-05/0.009652, allocations: 8 kB / 1.195 GB, free: 2.48 MB / 1.136 GB
Notification: Performance of postOpt calculateStrongComponentJacobians (simulation): time 2.585e-06/0.009654, allocations: 7.938 kB / 1.195 GB, free: 2.473 MB / 1.136 GB
Notification: Performance of postOpt calculateStateSetsJacobians (simulation): time 1.052e-06/0.009655, allocations: 0 / 1.195 GB, free: 2.473 MB / 1.136 GB
Notification: Performance of postOpt symbolicJacobian (simulation): time 0.0002989/0.009954, allocations: 0.5414 MB / 1.196 GB, free: 1.879 MB / 1.136 GB
Notification: Performance of postOpt simplifyTimeIndepFuncCalls (simulation): time 2.756e-05/0.009982, allocations: 15.94 kB / 1.196 GB, free: 1.863 MB / 1.136 GB
Notification: Performance of postOpt simplifyAllExpressions (simulation): time 7.101e-05/0.01005, allocations: 20.02 kB / 1.196 GB, free: 1.844 MB / 1.136 GB
Notification: Performance of postOpt findZeroCrossings (simulation): time 2.565e-05/0.01008, allocations: 3.984 kB / 1.196 GB, free: 1.84 MB / 1.136 GB
Notification: Performance of postOpt collapseArrayExpressions (simulation): time 1.629e-05/0.01009, allocations: 12 kB / 1.196 GB, free: 1.828 MB / 1.136 GB
Notification: Performance of sorting global known variables: time 4.553e-05/0.01014, allocations: 66.78 kB / 1.196 GB, free: 1.758 MB / 1.136 GB
Notification: Performance of sort global known variables: time 4e-08/0.01014, allocations: 0 / 1.196 GB, free: 1.758 MB / 1.136 GB
Notification: Performance of remove unused functions: time 0.0002151/0.01036, allocations: 87.83 kB / 1.196 GB, free: 1.672 MB / 1.136 GB
Notification: Model statistics after passing the back-end for simulation:
 * Number of independent subsystems: 1
 * Number of states: 1 (SlewRateLimiterClaRa.y_aux)
 * Number of discrete variables: 15 (SlewRateLimiter.sampleTrigger,$whenCondition1,$whenCondition2,$whenCondition3,$whenCondition4,SlewRateLimiter.firstTrigger,SlewRateLimiter.y,SlewRateLimiter.y_rcbl_by_rate_max,SlewRateLimiter.y_rcbl_by_rate_min,SlewRateLimiter.y_limited_by_rate,Testdata.a,Testdata.b,Testdata.last,Testdata.nextEvent,Testdata.nextEventScaled)
 * Number of discrete states: 12 (Testdata.nextEvent,Testdata.last,Testdata.nextEventScaled,Testdata.b,Testdata.a,$whenCondition2,$whenCondition4,SlewRateLimiter.y,SlewRateLimiter.y_limited_by_rate,SlewRateLimiter.y_rcbl_by_rate_min,SlewRateLimiter.y_rcbl_by_rate_max,$whenCondition3)
 * Number of clocked states: 0 ()
 * Top-level inputs: 0
Notification: Strong component statistics for simulation (9):
 * Single equations (assignments): 6
 * Array equations: 0
 * Algorithm blocks: 2
 * Record equations: 0
 * When equations: 1
 * If-equations: 0
 * Equation systems (not torn): 0
 * Torn equation systems: 0
 * Mixed (continuous/discrete) equation systems: 0
Notification: Performance of Backend phase and start with SimCode phase: time 0.0003064/0.01066, allocations: 0.7454 MB / 1.197 GB, free: 0.8984 MB / 1.136 GB
Notification: Performance of simCode: created initialization part: time 0.0003048/0.01097, allocations: 0.5837 MB / 1.198 GB, free: 228 kB / 1.136 GB
Notification: Performance of simCode: created event and clocks part: time 2.835e-06/0.01097, allocations: 0 / 1.198 GB, free: 228 kB / 1.136 GB
Notification: Performance of simCode: created simulation system equations: time 0.0001224/0.01109, allocations: 249.4 kB / 1.198 GB, free: 15.94 MB / 1.151 GB
Notification: Performance of simCode: created of all other equations (e.g. parameter, nominal, assert, etc): time 0.0001874/0.01128, allocations: 63.06 kB / 1.198 GB, free: 15.88 MB / 1.151 GB
Notification: Performance of simCode: created linear, non-linear and system jacobian parts: time 0.001226/0.01251, allocations: 1.711 MB / 1.199 GB, free: 14.05 MB / 1.151 GB
Notification: Performance of simCode: some other stuff during SimCode phase: time 4.353e-05/0.01255, allocations: 84.22 kB / 1.2 GB, free: 13.94 MB / 1.151 GB
Notification: Performance of simCode: alias equations: time 3.951e-05/0.01259, allocations: 16.64 kB / 1.2 GB, free: 13.93 MB / 1.151 GB
Notification: Performance of simCode: all other stuff during SimCode phase: time 0.0001568/0.01275, allocations: 151.3 kB / 1.2 GB, free: 13.78 MB / 1.151 GB
Notification: Performance of SimCode: time 7.52e-07/0.01275, allocations: 0 / 1.2 GB, free: 13.78 MB / 1.151 GB
Notification: Performance of FMU documentation: time 0.02404/0.03679, allocations: 7.912 MB / 1.207 GB, free: 6.266 MB / 1.151 GB
Notification: FMU-only work: backend 0.0001798, simCode 0.0007307, templates 0
Notification: Performance of buildModelFMU: Generate the FMI files: time 0.06845/0.1052, allocations: 1.329 MB / 1.209 GB, free: 4.906 MB / 1.151 GB
Notification: Building FMU for platform 'static' (1/1).
Notification: Finished FMU for platform 'static' (1/1).
Notification: Performance of buildModelFMU: Generate platform static: time 2.474/2.579, allocations: 15.41 kB / 1.209 GB, free: 4.895 MB / 1.151 GB
"
[Timeout remaining time 657]
(rm -f TransiEnt_TransiEnt.Basics.Blocks.Check.CompareSlewRateLimiters.pipe ; mkfifo TransiEnt_TransiEnt.Basics.Blocks.Check.CompareSlewRateLimiters.pipe ; head -c 1048576 < TransiEnt_TransiEnt.Basics.Blocks.Check.CompareSlewRateLimiters.pipe >> ../files/TransiEnt_TransiEnt.Basics.Blocks.Check.CompareSlewRateLimiters.sim & (cd run_OMSimulator && /home/hudson/saved_omc/OMSimulator/install/bin/OMSimulator  --stripRoot --tempDir=temp_TransiEnt_TransiEnt_Basics_Blocks_Check_CompareSlewRateLimiters_fmu --startTime=0 --stopTime=26000 --stepSize=29.9885 --mode=me --timeout=240 --tolerance=1e-06 ../TransiEnt_TransiEnt_Basics_Blocks_Check_CompareSlewRateLimiters.fmu) > TransiEnt_TransiEnt.Basics.Blocks.Check.CompareSlewRateLimiters.pipe 2>&1) [Timeout 252.0]
(rm -f TransiEnt_TransiEnt.Basics.Blocks.Check.CompareSlewRateLimiters_OMSimulator-cs-cvode.pipe ; mkfifo TransiEnt_TransiEnt.Basics.Blocks.Check.CompareSlewRateLimiters_OMSimulator-cs-cvode.pipe ; head -c 1048576 < TransiEnt_TransiEnt.Basics.Blocks.Check.CompareSlewRateLimiters_OMSimulator-cs-cvode.pipe >> /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/files/TransiEnt_TransiEnt.Basics.Blocks.Check.CompareSlewRateLimiters_OMSimulator-cs-cvode.sim & (cd run_OMSimulator-cs-cvode && /home/hudson/saved_omc/OMSimulator/install/bin/OMSimulator  --stripRoot --tempDir=temp_TransiEnt_TransiEnt_Basics_Blocks_Check_CompareSlewRateLimiters_OMSimulator-cs-cvode_fmu --startTime=0 --stopTime=26000 --stepSize=29.9885 --mode=cs --timeout=240 --tolerance=1e-06 ../TransiEnt_TransiEnt_Basics_Blocks_Check_CompareSlewRateLimiters_OMSimulator-cs-cvode.fmu) > TransiEnt_TransiEnt.Basics.Blocks.Check.CompareSlewRateLimiters_OMSimulator-cs-cvode.pipe 2>&1) [Timeout 252.0]
(rm -f TransiEnt_TransiEnt.Basics.Blocks.Check.CompareSlewRateLimiters_OMSimulator-cs-euler.pipe ; mkfifo TransiEnt_TransiEnt.Basics.Blocks.Check.CompareSlewRateLimiters_OMSimulator-cs-euler.pipe ; head -c 1048576 < TransiEnt_TransiEnt.Basics.Blocks.Check.CompareSlewRateLimiters_OMSimulator-cs-euler.pipe >> /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/files/TransiEnt_TransiEnt.Basics.Blocks.Check.CompareSlewRateLimiters_OMSimulator-cs-euler.sim & (cd run_OMSimulator-cs-euler && /home/hudson/saved_omc/OMSimulator/install/bin/OMSimulator  --stripRoot --tempDir=temp_TransiEnt_TransiEnt_Basics_Blocks_Check_CompareSlewRateLimiters_OMSimulator-cs-euler_fmu --startTime=0 --stopTime=26000 --stepSize=29.9885 --mode=cs --timeout=240 --tolerance=1e-06 ../TransiEnt_TransiEnt_Basics_Blocks_Check_CompareSlewRateLimiters_OMSimulator-cs-euler.fmu) > TransiEnt_TransiEnt.Basics.Blocks.Check.CompareSlewRateLimiters_OMSimulator-cs-euler.pipe 2>&1) [Timeout 252.0]
(rm -f TransiEnt_TransiEnt.Basics.Blocks.Check.CompareSlewRateLimiters_fmpy.pipe ; mkfifo TransiEnt_TransiEnt.Basics.Blocks.Check.CompareSlewRateLimiters_fmpy.pipe ; head -c 1048576 < TransiEnt_TransiEnt.Basics.Blocks.Check.CompareSlewRateLimiters_fmpy.pipe >> /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/files/TransiEnt_TransiEnt.Basics.Blocks.Check.CompareSlewRateLimiters_fmpy.sim & (cd run_fmpy && python3 -m fmpy simulate --output-file ../TransiEnt_TransiEnt.Basics.Blocks.Check.CompareSlewRateLimiters_fmpy_res.csv --start-time 0 --stop-time 26000 --timeout 240 --relative-tolerance 1e-06 --interface-type ModelExchange --solver CVode --output-interval 29.9885 ../TransiEnt_TransiEnt_Basics_Blocks_Check_CompareSlewRateLimiters.fmu) > TransiEnt_TransiEnt.Basics.Blocks.Check.CompareSlewRateLimiters_fmpy.pipe 2>&1) [Timeout 252.0]
(rm -f TransiEnt_TransiEnt.Basics.Blocks.Check.CompareSlewRateLimiters_fmpy-fmi3-cs-cvode.pipe ; mkfifo TransiEnt_TransiEnt.Basics.Blocks.Check.CompareSlewRateLimiters_fmpy-fmi3-cs-cvode.pipe ; head -c 1048576 < TransiEnt_TransiEnt.Basics.Blocks.Check.CompareSlewRateLimiters_fmpy-fmi3-cs-cvode.pipe >> /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/files/TransiEnt_TransiEnt.Basics.Blocks.Check.CompareSlewRateLimiters_fmpy-fmi3-cs-cvode.sim & (cd run_fmpy-fmi3-cs-cvode && python3 -m fmpy simulate --output-file ../TransiEnt_TransiEnt.Basics.Blocks.Check.CompareSlewRateLimiters_fmpy-fmi3-cs-cvode_res.csv --start-time 0 --stop-time 26000 --timeout 240 --relative-tolerance 1e-06 --interface-type CoSimulation --output-interval 29.9885 ../TransiEnt_TransiEnt_Basics_Blocks_Check_CompareSlewRateLimiters_fmpy-fmi3-cs-cvode.fmu) > TransiEnt_TransiEnt.Basics.Blocks.Check.CompareSlewRateLimiters_fmpy-fmi3-cs-cvode.pipe 2>&1) [Timeout 252.0]
[Calling sys.exit(0), Time elapsed: 9.488806652836502]