(cd run_fmpy-fmi3-cs-cvode && python3 -m fmpy simulate --output-file ../BuildingSystems_BuildingSystems.Applications.SolarThermalSystems.SolarThermalSystem2_fmpy-fmi3-cs-cvode_res.csv --start-time 0 --stop-time 3.1536e+07 --timeout 240 --relative-tolerance 1e-06 --interface-type CoSimulation --output-interval 12614.4 ../BuildingSystems_BuildingSystems_Applications_SolarThermalSystems_SolarThermalSystem2_fmpy-fmi3-cs-cvode.fmu)
LOG_SOLVER        | info    | CVODE linear multistep method CV_BDF
LOG_SOLVER        | info    | CVODE maximum integration order CV_ITER_NEWTON
LOG_SOLVER        | info    | CVODE use equidistant time grid YES
LOG_SOLVER        | info    | CVODE Using relative error tolerance 1.000000e-06
LOG_SOLVER        | info    | CVODE Using sparse linear solver SUNLinSol_KLU.
LOG_SOLVER        | info    | CVODE Use sparse Jacobian method coloredNumerical
LOG_SOLVER        | info    | CVODE uses internal root finding method YES
LOG_SOLVER        | info    | CVODE maximum absolut step size 0
LOG_SOLVER        | info    | CVODE initial step size is set automatically
LOG_SOLVER        | info    | CVODE maximum integration order 5
LOG_SOLVER        | info    | CVODE maximum number of nonlinear convergence failures permitted during one step 10
LOG_SOLVER        | info    | CVODE BDF stability limit detection algorithm ON
LOG_STDOUT        | info    | ... loading "tab1" from "/tmp/tmpxd81fwlt/resources/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Climate/weather/Egypt_ElGouna.txt"
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 26322.534317
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56499.48230978969, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.5 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 26322.534317
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56499.48230978969, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.5 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 26322.534317
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56499.48230978969, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.5 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 26322.534317
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56499.48230978969, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.5 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 26993.400440
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56496.10514664254, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.1 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 26993.400440
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56496.10514664254, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.1 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 26993.400440
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56496.10514664254, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.1 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 26993.400440
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56496.10514664254, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.1 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 27610.261919
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56496.74469480949, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.7 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 27610.261919
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56496.74469480995, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.7 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 27610.261919
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56496.74469480995, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.7 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 27610.261919
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56496.74469480995, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.7 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 28160.301422
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56496.5505659373, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.6 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 28160.301422
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56496.55056593777, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.6 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 28160.301422
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56496.55056593777, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.6 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 28160.301422
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56496.55056593777, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.6 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 28663.776561
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56496.68210151582, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.7 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 28663.776561
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56496.68210151582, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.7 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 28663.776561
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56496.68210151582, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.7 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 28663.776561
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56496.68210151582, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.7 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 29131.800917
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56496.81798169174, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 29131.800917
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56496.81798169174, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 29131.800917
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56496.81798169174, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 29131.800917
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56496.81798169174, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56496.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 29571.796374
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56497.09995188977, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.1 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 29571.796374
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56497.09995188977, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.1 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 29571.796374
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56497.09995188977, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.1 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 29571.796374
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56497.09995188977, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.1 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 29988.757123
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56497.20412122307, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.2 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 29988.757123
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56497.20412122353, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.2 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 29988.757123
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56497.20412122353, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.2 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 29988.757123
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56497.20412122353, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.2 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 30386.535289
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56497.35573073477, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.4 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 30386.535289
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56497.35573073477, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.4 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 30386.535289
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56497.35573073477, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.4 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 30386.535289
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56497.35573073477, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.4 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 30767.974305
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56497.26813876821, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.3 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 30767.974305
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56497.26813876844, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.3 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 30767.974305
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56497.26813876844, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.3 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 30767.974305
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56497.26813876844, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.3 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 31135.093184
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56497.42395264795, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.4 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 31135.093184
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56497.42395264795, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.4 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 31135.093184
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56497.42395264795, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.4 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 31135.093184
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56497.42395264795, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.4 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 31489.471352
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56497.72770518326, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.7 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 31489.471352
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56497.7277051835, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.7 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 31489.471352
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56497.7277051835, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.7 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 31489.471352
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56497.7277051835, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.7 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 31832.451067
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56497.7584702032, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 31832.451067
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56497.75847020344, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 31832.451067
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56497.75847020344, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 31832.451067
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56497.75847020344, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 32165.316974
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56497.8369167624, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 32165.316974
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56497.8369167624, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 32165.316974
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56497.8369167624, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 32165.316974
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56497.8369167624, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56497.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 32492.509801
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56498.99210360367, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 32492.509801
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56498.99210360367, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 32492.509801
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56498.99210360367, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 32492.509801
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56498.99210360367, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 32694.454989
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56499.24247937975, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.2 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 32694.454989
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56499.24247937975, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.2 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 32694.454989
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56499.24247937975, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.2 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 32694.454989
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56499.24247937975, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.2 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 32881.991317
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56498.87530400645, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56498.9 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 32881.991317
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56498.87530400645, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56498.9 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 32881.991317
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56498.87530400645, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56498.9 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 32881.991317
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56498.87530400645, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56498.9 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33058.403378
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56499.56799697789, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.6 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33058.403378
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56499.56799697789, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.6 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33058.403378
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56499.56799697789, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.6 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33058.403378
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56499.56799697789, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.6 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33226.372144
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56499.61116427887, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.6 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33226.372144
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56499.61116427887, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.6 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33226.372144
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56499.61116427887, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.6 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33226.372144
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56499.61116427887, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.6 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33387.812159
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56499.16250030161, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.2 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33387.812159
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56499.16250030161, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.2 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33387.812159
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56499.16250030161, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.2 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33387.812159
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56499.16250030161, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.2 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33544.141917
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56499.71651386883, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.7 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33544.141917
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56499.71651386883, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.7 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33544.141917
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56499.71651386883, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.7 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33544.141917
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56499.71651386883, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.7 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33696.548821
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56499.69279406295, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.7 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33696.548821
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56499.69279406295, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.7 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33696.548821
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56499.69279406295, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.7 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33696.548821
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56499.69279406295, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.7 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33846.069774
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56499.76145550667, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33846.069774
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56499.76145550667, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33846.069774
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56499.76145550667, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33846.069774
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56499.76145550667, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33993.729131
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56499.78363189683, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33993.729131
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56499.78363189683, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33993.729131
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56499.78363189683, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 33993.729131
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56499.78363189683, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 34140.720219
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56499.78860432236, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 34140.720219
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56499.78860432236, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 34140.720219
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56499.78860432236, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 34140.720219
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56499.78860432236, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 34288.832906
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56499.79480681563, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 34288.832906
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56499.79480681563, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 34288.832906
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56499.79480681563, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 34288.832906
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56499.79480681563, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 34443.618630
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56499.78049501614, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 34443.618630
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56499.78049501614, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 34443.618630
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56499.78049501614, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 34443.618630
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56499.78049501614, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | Found event, previous asserts are ignored.
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 37843.200000
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56499.79614483146, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 37843.200000
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56499.79614483146, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | info    | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Fluid/Movers/FlowControlled_m_flow.mo:93:3-98:58:writable]
|                 | |       | The following assertion has been violated at time 37843.200000
|                 | |       | (((-pump1.dp) <= pump1.dpMax), pump1.dp=-56499.79614483146, pump1.dpMax=40000) --> "In SolarThermalSystem2.pump1: Model operates with head -dp = 56499.8 Pa,
|                 | |       |     exceeding the pressure allowed by the parameter SolarThermalSystem2.pump1.dpMax.
|                 | |       |     This can happen if the model forces a high mass flow rate through a closed actuator,
|                 | |       |     or if the performance record is unreasonable. Please verify your model, and
|                 | |       |     consider using one of the other pump or fan models."
LOG_ASSERT        | error   | No event found, but assert was triggered. Throwing now!
Traceback (most recent call last):
  File "<frozen runpy>", line 198, in _run_module_as_main
  File "<frozen runpy>", line 88, in _run_code
  File "/opt/libtest-venv/lib/python3.14/site-packages/fmpy/__main__.py", line 4, in <module>
    main()
    ~~~~^^
  File "/opt/libtest-venv/lib/python3.14/site-packages/fmpy/cli.py", line 186, in main
    result = simulate_fmu(args.fmu_filename,
                          validate=args.validate,
    ...<14 lines>...
                          visible=args.visible,
                          fmi_call_logger=fmi_call_logger)
  File "/opt/libtest-venv/lib/python3.14/site-packages/fmpy/simulation.py", line 801, in simulate_fmu
    result = simulateCS(model_description, fmu, start_time, stop_time, relative_tolerance, start_values, apply_default_start_values, input, output, output_interval, timeout, step_finished, set_input_derivatives, use_event_mode, early_return_allowed, validate, initialize, terminate, set_stop_time)
  File "/opt/libtest-venv/lib/python3.14/site-packages/fmpy/simulation.py", line 1350, in simulateCS
    event_encountered, terminate_simulation, early_return, last_successful_time = fmu.doStep(currentCommunicationPoint=time, communicationStepSize=step_size)
                                                                                  ~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/opt/libtest-venv/lib/python3.14/site-packages/fmpy/fmi3.py", line 1968, in doStep
    self.fmi3DoStep(
    ~~~~~~~~~~~~~~~^
        self.component,
        ^^^^^^^^^^^^^^^
    ...<6 lines>...
        byref(lastSuccessfulTime),
        ^^^^^^^^^^^^^^^^^^^^^^^^^^
    )
    ^
  File "/opt/libtest-venv/lib/python3.14/site-packages/fmpy/fmi3.py", line 1268, in fmi3DoStep
    return self._call(
           ~~~~~~~~~~^
        "fmi3DoStep",
        ^^^^^^^^^^^^^
    ...<7 lines>...
        lastSuccessfulTime,
        ^^^^^^^^^^^^^^^^^^^
    )
    ^
  File "/opt/libtest-venv/lib/python3.14/site-packages/fmpy/fmi1.py", line 369, in _call
    raise FMICallException(function=fname, status=res)
fmpy.fmi1.FMICallException: fmi3DoStep failed with status 3 (error).