Running: ./testmodel.py --libraries=/home/hudson/saved_omc/libraries/.openmodelica/libraries/ --ompython_omhome=/usr Buildings_8.0.0_Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.conf.json loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/package.mo", uses=false) loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 3.2.3+maint.om/package.mo", uses=false) loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 3.2.3+maint.om/package.mo", uses=false) loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 3.2.3+maint.om/package.mo", uses=false) Using package ModelicaServices with version 3.2.3 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 3.2.3+maint.om/package.mo) Using package Modelica with version 3.2.3 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 3.2.3+maint.om/package.mo) Using package Complex with version 3.2.3 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 3.2.3+maint.om/package.mo) Using package Buildings with version 8.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/package.mo) Running command: "" <> buildModelFMU(Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase,fileNamePrefix="Buildings_8_0_0_Buildings_Obsolete_DistrictHeatingCooling_Examples_HeatingCoolingHotWater3ClustersBaseCase",fmuType="me",version="2.0",platforms={"static"}) "" <> buildModelFMU(Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase,fileNamePrefix="Buildings_8_0_0_Buildings_Obsolete_DistrictHeatingCooling_Examples_HeatingCoolingHotWater3ClustersBaseCase",fmuType="me",version="2.0",platforms={"static"}) Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/package.mo): time 1.401/1.401, allocations: 287.4 MB / 302.6 MB, free: 8.262 MB / 234.7 MB Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 3.2.3+maint.om/package.mo): time 0.0008487/0.0008487, allocations: 180.6 kB / 371.1 MB, free: 10.79 MB / 298.7 MB Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 3.2.3+maint.om/package.mo): time 1.088/1.088, allocations: 205.4 MB / 0.6298 GB, free: 10.54 MB / 458.7 MB Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 3.2.3+maint.om/package.mo): time 0.0006641/0.0006641, allocations: 96.97 kB / 0.7431 GB, free: 6.516 MB / 0.5573 GB Notification: Performance of FrontEnd - loaded program: time 0.0003017/0.0003017, allocations: 10.47 kB / 0.8662 GB, free: 141 MB / 0.6198 GB Notification: Performance of FrontEnd - Absyn->SCode: time 0.1433/0.1436, allocations: 115.3 MB / 0.9787 GB, free: 28.08 MB / 0.6198 GB Notification: Performance of NFInst.instantiate(Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase): time 2.993/3.136, allocations: 1.802 GB / 2.781 GB, free: 0.7188 MB / 1.354 GB Notification: Performance of NFInst.instExpressions: time 1.277/4.413, allocations: 0.5252 GB / 3.306 GB, free: 9.117 MB / 1.495 GB Notification: Performance of NFInst.updateImplicitVariability: time 0.0766/4.489, allocations: 2.031 MB / 3.308 GB, free: 7.773 MB / 1.495 GB Notification: Performance of NFTyping.typeComponents: time 0.06415/4.554, allocations: 18.98 MB / 3.327 GB, free: 6.016 MB / 1.51 GB [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/Experimental/DHC/Loads/BaseClasses/getPeakLoad.mo:2:1-99:16:writable] Warning: Pure function ‘Buildings.Experimental.DHC.Loads.BaseClasses.getPeakLoad‘ contains a call to impure function ‘Modelica.Utilities.Streams.readLine‘. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/BoundaryConditions/WeatherData/BaseClasses/getHeaderElementTMY3.mo:2:1-105:25:writable] Warning: Pure function ‘Buildings.BoundaryConditions.WeatherData.BaseClasses.getHeaderElementTMY3‘ contains a call to impure function ‘Modelica.Utilities.Streams.readLine‘. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/BoundaryConditions/WeatherData/BaseClasses/getLongitudeTMY3.mo:2:1-48:21:writable] Warning: Pure function ‘Buildings.BoundaryConditions.WeatherData.BaseClasses.getLongitudeTMY3‘ contains a call to impure function ‘Buildings.BoundaryConditions.WeatherData.BaseClasses.getHeaderElementTMY3‘. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/BoundaryConditions/WeatherData/BaseClasses/getLatitudeTMY3.mo:2:1-48:20:writable] Warning: Pure function ‘Buildings.BoundaryConditions.WeatherData.BaseClasses.getLatitudeTMY3‘ contains a call to impure function ‘Buildings.BoundaryConditions.WeatherData.BaseClasses.getHeaderElementTMY3‘. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/BoundaryConditions/WeatherData/BaseClasses/getTimeZoneTMY3.mo:2:1-47:20:writable] Warning: Pure function ‘Buildings.BoundaryConditions.WeatherData.BaseClasses.getTimeZoneTMY3‘ contains a call to impure function ‘Buildings.BoundaryConditions.WeatherData.BaseClasses.getHeaderElementTMY3‘. Notification: Performance of NFTyping.typeBindings: time 0.1644/4.718, allocations: 57.7 MB / 3.383 GB, free: 6.035 MB / 1.557 GB Notification: Performance of NFTyping.typeClassSections: time 0.08877/4.807, allocations: 31.17 MB / 3.413 GB, free: 10.93 MB / 1.589 GB [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/Experimental/DHC/Loads/BaseClasses/getPeakLoad.mo:34:5-36:23:writable] Error: Failed to evaluate function: Modelica.Utilities.Streams.readLine. Notification: Performance of NFFlatten.flatten: time 1.883/6.69, allocations: 162.4 MB / 3.572 GB, free: 15.48 MB / 1.682 GB Notification: Performance of NFFlatten.resolveConnections: time 0.08038/6.77, allocations: 45.16 MB / 3.616 GB, free: 25.9 MB / 1.698 GB Notification: Performance of NFEvalConstants.evaluate: time 0.09494/6.865, allocations: 44.41 MB / 3.66 GB, free: 25.78 MB / 1.698 GB Notification: Performance of NFSimplifyModel.simplify: time 0.06404/6.929, allocations: 37.15 MB / 3.696 GB, free: 25.65 MB / 1.698 GB Notification: Performance of NFPackage.collectConstants: time 0.01707/6.946, allocations: 2.059 MB / 3.698 GB, free: 25.65 MB / 1.698 GB Notification: Performance of NFFlatten.collectFunctions: time 0.06335/7.01, allocations: 15.7 MB / 3.713 GB, free: 25.63 MB / 1.698 GB Notification: Performance of NFScalarize.scalarize: time 0.02136/7.031, allocations: 11.04 MB / 3.724 GB, free: 25.63 MB / 1.698 GB Notification: Performance of NFVerifyModel.verify: time 0.02735/7.058, allocations: 12.46 MB / 3.736 GB, free: 25.6 MB / 1.698 GB Notification: Performance of NFConvertDAE.convert: time 0.08964/7.148, allocations: 82.16 MB / 3.816 GB, free: 2.008 MB / 1.698 GB Notification: Performance of FrontEnd - DAE generated: time 5.36e-06/7.148, allocations: 0 / 3.816 GB, free: 2.008 MB / 1.698 GB Notification: Performance of FrontEnd: time 1.553e-06/7.148, allocations: 0 / 3.816 GB, free: 2.008 MB / 1.698 GB Notification: Performance of Transformations before backend: time 0.00284/7.151, allocations: 0 / 3.816 GB, free: 2.008 MB / 1.698 GB Notification: Model statistics after passing the front-end and creating the data structures used by the back-end: * Number of equations: 8753 * Number of variables: 8753 Notification: Performance of Generate backend data structure: time 0.1134/7.264, allocations: 52.74 MB / 3.868 GB, free: 4.719 MB / 1.745 GB Notification: Performance of prepare preOptimizeDAE: time 3.94e-05/7.264, allocations: 8.031 kB / 3.868 GB, free: 4.711 MB / 1.745 GB Notification: Performance of preOpt introduceOutputAliases (simulation): time 0.01336/7.278, allocations: 4.339 MB / 3.872 GB, free: 2.512 MB / 1.745 GB Notification: Performance of preOpt normalInlineFunction (simulation): time 0.0706/7.348, allocations: 16.76 MB / 3.888 GB, free: 1.77 MB / 1.761 GB Notification: Performance of preOpt evaluateParameters (simulation): time 0.101/7.449, allocations: 54.02 MB / 3.941 GB, free: 1.148 MB / 1.792 GB [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-ret2.pumChi.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.ret2.pumChi.eff.getArrayAsString({(ret2.pumChi.eff.per.pressure.dp[2] - ret2.pumChi.eff.per.pressure.dp[1]) / (ret2.pumChi.eff.per.pressure.V_flow[2] - ret2.pumChi.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-ret2.pumHotWat.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.ret2.pumHotWat.eff.getArrayAsString({(ret2.pumHotWat.eff.per.pressure.dp[2] - ret2.pumHotWat.eff.per.pressure.dp[1]) / (ret2.pumHotWat.eff.per.pressure.V_flow[2] - ret2.pumHotWat.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-ret2.pumHea.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.ret2.pumHea.eff.getArrayAsString({(ret2.pumHea.eff.per.pressure.dp[2] - ret2.pumHea.eff.per.pressure.dp[1]) / (ret2.pumHea.eff.per.pressure.V_flow[2] - ret2.pumHea.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-apa2.pumChi.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.apa2.pumChi.eff.getArrayAsString({(apa2.pumChi.eff.per.pressure.dp[2] - apa2.pumChi.eff.per.pressure.dp[1]) / (apa2.pumChi.eff.per.pressure.V_flow[2] - apa2.pumChi.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-apa2.pumHotWat.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.apa2.pumHotWat.eff.getArrayAsString({(apa2.pumHotWat.eff.per.pressure.dp[2] - apa2.pumHotWat.eff.per.pressure.dp[1]) / (apa2.pumHotWat.eff.per.pressure.V_flow[2] - apa2.pumHotWat.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-apa2.pumHea.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.apa2.pumHea.eff.getArrayAsString({(apa2.pumHea.eff.per.pressure.dp[2] - apa2.pumHea.eff.per.pressure.dp[1]) / (apa2.pumHea.eff.per.pressure.V_flow[2] - apa2.pumHea.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff4.pumChi.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.larOff4.pumChi.eff.getArrayAsString({(larOff4.pumChi.eff.per.pressure.dp[2] - larOff4.pumChi.eff.per.pressure.dp[1]) / (larOff4.pumChi.eff.per.pressure.V_flow[2] - larOff4.pumChi.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff4.pumHotWat.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.larOff4.pumHotWat.eff.getArrayAsString({(larOff4.pumHotWat.eff.per.pressure.dp[2] - larOff4.pumHotWat.eff.per.pressure.dp[1]) / (larOff4.pumHotWat.eff.per.pressure.V_flow[2] - larOff4.pumHotWat.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff4.pumHea.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.larOff4.pumHea.eff.getArrayAsString({(larOff4.pumHea.eff.per.pressure.dp[2] - larOff4.pumHea.eff.per.pressure.dp[1]) / (larOff4.pumHea.eff.per.pressure.V_flow[2] - larOff4.pumHea.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff3.pumChi.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.larOff3.pumChi.eff.getArrayAsString({(larOff3.pumChi.eff.per.pressure.dp[2] - larOff3.pumChi.eff.per.pressure.dp[1]) / (larOff3.pumChi.eff.per.pressure.V_flow[2] - larOff3.pumChi.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff3.pumHotWat.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.larOff3.pumHotWat.eff.getArrayAsString({(larOff3.pumHotWat.eff.per.pressure.dp[2] - larOff3.pumHotWat.eff.per.pressure.dp[1]) / (larOff3.pumHotWat.eff.per.pressure.V_flow[2] - larOff3.pumHotWat.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff3.pumHea.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.larOff3.pumHea.eff.getArrayAsString({(larOff3.pumHea.eff.per.pressure.dp[2] - larOff3.pumHea.eff.per.pressure.dp[1]) / (larOff3.pumHea.eff.per.pressure.V_flow[2] - larOff3.pumHea.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-apa1.pumChi.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.apa1.pumChi.eff.getArrayAsString({(apa1.pumChi.eff.per.pressure.dp[2] - apa1.pumChi.eff.per.pressure.dp[1]) / (apa1.pumChi.eff.per.pressure.V_flow[2] - apa1.pumChi.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-apa1.pumHotWat.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.apa1.pumHotWat.eff.getArrayAsString({(apa1.pumHotWat.eff.per.pressure.dp[2] - apa1.pumHotWat.eff.per.pressure.dp[1]) / (apa1.pumHotWat.eff.per.pressure.V_flow[2] - apa1.pumHotWat.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-apa1.pumHea.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.apa1.pumHea.eff.getArrayAsString({(apa1.pumHea.eff.per.pressure.dp[2] - apa1.pumHea.eff.per.pressure.dp[1]) / (apa1.pumHea.eff.per.pressure.V_flow[2] - apa1.pumHea.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff2.pumChi.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.larOff2.pumChi.eff.getArrayAsString({(larOff2.pumChi.eff.per.pressure.dp[2] - larOff2.pumChi.eff.per.pressure.dp[1]) / (larOff2.pumChi.eff.per.pressure.V_flow[2] - larOff2.pumChi.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff2.pumHotWat.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.larOff2.pumHotWat.eff.getArrayAsString({(larOff2.pumHotWat.eff.per.pressure.dp[2] - larOff2.pumHotWat.eff.per.pressure.dp[1]) / (larOff2.pumHotWat.eff.per.pressure.V_flow[2] - larOff2.pumHotWat.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff2.pumHea.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.larOff2.pumHea.eff.getArrayAsString({(larOff2.pumHea.eff.per.pressure.dp[2] - larOff2.pumHea.eff.per.pressure.dp[1]) / (larOff2.pumHea.eff.per.pressure.V_flow[2] - larOff2.pumHea.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-ret1.pumChi.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.ret1.pumChi.eff.getArrayAsString({(ret1.pumChi.eff.per.pressure.dp[2] - ret1.pumChi.eff.per.pressure.dp[1]) / (ret1.pumChi.eff.per.pressure.V_flow[2] - ret1.pumChi.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-ret1.pumHotWat.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.ret1.pumHotWat.eff.getArrayAsString({(ret1.pumHotWat.eff.per.pressure.dp[2] - ret1.pumHotWat.eff.per.pressure.dp[1]) / (ret1.pumHotWat.eff.per.pressure.V_flow[2] - ret1.pumHotWat.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-ret1.pumHea.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.ret1.pumHea.eff.getArrayAsString({(ret1.pumHea.eff.per.pressure.dp[2] - ret1.pumHea.eff.per.pressure.dp[1]) / (ret1.pumHea.eff.per.pressure.V_flow[2] - ret1.pumHea.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff1.pumChi.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.larOff1.pumChi.eff.getArrayAsString({(larOff1.pumChi.eff.per.pressure.dp[2] - larOff1.pumChi.eff.per.pressure.dp[1]) / (larOff1.pumChi.eff.per.pressure.V_flow[2] - larOff1.pumChi.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff1.pumHotWat.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.larOff1.pumHotWat.eff.getArrayAsString({(larOff1.pumHotWat.eff.per.pressure.dp[2] - larOff1.pumHotWat.eff.per.pressure.dp[1]) / (larOff1.pumHotWat.eff.per.pressure.V_flow[2] - larOff1.pumHotWat.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/Fluid/Movers/BaseClasses/FlowMachineInterface.mo:288:5-303:24:writable] Warning: If-equations are only partially supported. Ignoring algorithm Modelica.Utilities.Streams.print("Warning:========It is recommended that the volume flow rate versus pressure relationof the fan or pump satisfies the minimum decrease condition (per.pressure.dp[i+1]-per.pressure.dp[i])d[i] = ------------------------------------------------- < " + String(-larOff1.pumHea.eff.kRes, 6, 0, true) + " (per.pressure.V_flow[i+1]-per.pressure.V_flow[i]) is" + Buildings.Obsolete.DistrictHeatingCooling.Examples.HeatingCoolingHotWater3ClustersBaseCase.larOff1.pumHea.eff.getArrayAsString({(larOff1.pumHea.eff.per.pressure.dp[2] - larOff1.pumHea.eff.per.pressure.dp[1]) / (larOff1.pumHea.eff.per.pressure.V_flow[2] - larOff1.pumHea.eff.per.pressure.V_flow[1])}, "d", 6, 6) + "Otherwise, a solution to the equations may not exist if the fan or pump speed is reduced.In this situation, the solver will fail due to non-convergence andthe simulation stops.", "");. Notification: Performance of preOpt simplifyIfEquations (simulation): time 0.01556/7.465, allocations: 7.565 MB / 3.949 GB, free: 10.66 MB / 1.807 GB Notification: Performance of preOpt expandDerOperator (simulation): time 0.01021/7.475, allocations: 3.551 MB / 3.952 GB, free: 8.242 MB / 1.807 GB Notification: Performance of preOpt clockPartitioning (simulation): time 0.09879/7.574, allocations: 44.61 MB / 3.996 GB, free: 8.445 MB / 1.839 GB Notification: Performance of preOpt findStateOrder (simulation): time 0.0005888/7.575, allocations: 84.75 kB / 3.996 GB, free: 8.41 MB / 1.839 GB Notification: Performance of preOpt replaceEdgeChange (simulation): time 0.004588/7.579, allocations: 1.429 MB / 3.997 GB, free: 8.062 MB / 1.839 GB Notification: Performance of preOpt inlineArrayEqn (simulation): time 0.0005813/7.58, allocations: 0.8615 MB / 3.998 GB, free: 7.211 MB / 1.839 GB Notification: Performance of preOpt removeEqualRHS (simulation): time 0.09483/7.675, allocations: 39.62 MB / 4.037 GB, free: 12.88 MB / 1.87 GB Warning: The model contains alias variables with redundant start and/or conflicting nominal values. It is recommended to resolve the conflicts, because otherwise the system could be hard to solve. To print the conflicting alias sets and the chosen candidates please use -d=aliasConflicts. Notification: Performance of preOpt removeSimpleEquations (simulation): time 0.2873/7.962, allocations: 212 MB / 4.244 GB, free: 1.297 MB / 2.026 GB Notification: Performance of preOpt comSubExp (simulation): time 0.5431/8.505, allocations: 42.64 MB / 4.285 GB, free: 1.165 GB / 2.042 GB Notification: Performance of preOpt resolveLoops (simulation): time 0.03328/8.538, allocations: 14.23 MB / 4.299 GB, free: 1.165 GB / 2.042 GB Notification: Performance of preOpt evalFunc (simulation): time 0.08393/8.622, allocations: 66.9 MB / 4.365 GB, free: 1.13 GB / 2.042 GB Notification: Performance of preOpt encapsulateWhenConditions (simulation): time 0.02923/8.652, allocations: 15.94 MB / 4.38 GB, free: 1.125 GB / 2.042 GB Notification: Performance of preOpt simplifyInStream (simulation): time 0.01652/8.668, allocations: 2.86 MB / 4.383 GB, free: 1.125 GB / 2.042 GB Notification: Performance of pre-optimization done (n=1811): time 5.036e-05/8.668, allocations: 0 / 4.383 GB, free: 1.125 GB / 2.042 GB Notification: Performance of matching and sorting (n=1811): time 0.188/8.856, allocations: 64.9 MB / 4.446 GB, free: 1.111 GB / 2.042 GB Notification: Performance of inlineWhenForInitialization (initialization): time 0.0002484/8.857, allocations: 1.185 MB / 4.447 GB, free: 1.11 GB / 2.042 GB Notification: Performance of selectInitializationVariablesDAE (initialization): time 0.07256/8.929, allocations: 44.9 MB / 4.491 GB, free: 1.094 GB / 2.042 GB Notification: Performance of collectPreVariables (initialization): time 0.004877/8.934, allocations: 0.4971 MB / 4.492 GB, free: 1.093 GB / 2.042 GB Notification: Performance of collectInitialEqns (initialization): time 0.02092/8.955, allocations: 26.53 MB / 4.518 GB, free: 1.075 GB / 2.042 GB Notification: Performance of collectInitialBindings (initialization): time 0.006809/8.962, allocations: 6.176 MB / 4.524 GB, free: 1.07 GB / 2.042 GB Notification: Performance of simplifyInitialFunctions (initialization): time 0.003463/8.965, allocations: 0.5031 MB / 4.524 GB, free: 1.07 GB / 2.042 GB Notification: Performance of setup shared object (initialization): time 3.913e-05/8.965, allocations: 301.1 kB / 4.525 GB, free: 1.07 GB / 2.042 GB Notification: Performance of preBalanceInitialSystem (initialization): time 0.0307/8.996, allocations: 14.92 MB / 4.539 GB, free: 1.065 GB / 2.042 GB Notification: Performance of partitionIndependentBlocks (initialization): time 0.03454/9.031, allocations: 25.4 MB / 4.564 GB, free: 1.048 GB / 2.042 GB Notification: Performance of analyzeInitialSystem (initialization): time 0.06002/9.091, allocations: 35.95 MB / 4.599 GB, free: 1.017 GB / 2.042 GB Notification: Performance of solveInitialSystemEqSystem (initialization): time 0.0001534/9.091, allocations: 67.84 kB / 4.599 GB, free: 1.017 GB / 2.042 GB Notification: Performance of matching and sorting (n=3373) (initialization): time 0.09972/9.19, allocations: 47.16 MB / 4.645 GB, free: 0.9707 GB / 2.042 GB Notification: Performance of prepare postOptimizeDAE: time 0.002581/9.193, allocations: 7.146 MB / 4.652 GB, free: 0.9606 GB / 2.042 GB Notification: Performance of postOpt simplifyComplexFunction (initialization): time 0.0001995/9.193, allocations: 236 kB / 4.652 GB, free: 0.9604 GB / 2.042 GB Notification: Performance of postOpt tearingSystem (initialization): time 0.01959/9.213, allocations: 7.614 MB / 4.66 GB, free: 0.953 GB / 2.042 GB Notification: Performance of postOpt solveSimpleEquations (initialization): time 0.02461/9.238, allocations: 6.56 MB / 4.666 GB, free: 0.9465 GB / 2.042 GB Notification: Performance of postOpt calculateStrongComponentJacobians (initialization): time 0.02514/9.263, allocations: 22.29 MB / 4.688 GB, free: 0.9242 GB / 2.042 GB Notification: Performance of postOpt simplifyAllExpressions (initialization): time 0.04815/9.311, allocations: 6.472 MB / 4.694 GB, free: 0.9179 GB / 2.042 GB Notification: Performance of postOpt collapseArrayExpressions (initialization): time 0.004643/9.316, allocations: 1.372 MB / 4.696 GB, free: 0.9166 GB / 2.042 GB Notification: Performance of prepare postOptimizeDAE: time 9.538e-06/9.316, allocations: 4 kB / 4.696 GB, free: 0.9166 GB / 2.042 GB Notification: Performance of postOpt replaceHomotopyWithSimplified (initialization): time 0.08661/9.402, allocations: 42.8 MB / 4.737 GB, free: 0.8748 GB / 2.042 GB Notification: Performance of postOpt simplifyComplexFunction (initialization): time 0.0002967/9.402, allocations: 231.9 kB / 4.738 GB, free: 0.8745 GB / 2.042 GB Notification: Performance of postOpt tearingSystem (initialization): time 0.01923/9.422, allocations: 7.604 MB / 4.745 GB, free: 0.8671 GB / 2.042 GB Notification: Performance of postOpt solveSimpleEquations (initialization): time 0.02308/9.445, allocations: 6.51 MB / 4.751 GB, free: 0.8607 GB / 2.042 GB Notification: Performance of postOpt calculateStrongComponentJacobians (initialization): time 0.02484/9.47, allocations: 22.3 MB / 4.773 GB, free: 0.8384 GB / 2.042 GB Notification: Performance of postOpt simplifyAllExpressions (initialization): time 0.04429/9.514, allocations: 5.726 MB / 4.779 GB, free: 0.8328 GB / 2.042 GB Notification: Performance of postOpt collapseArrayExpressions (initialization): time 0.004317/9.518, allocations: 1.345 MB / 4.78 GB, free: 0.8315 GB / 2.042 GB Notification: Model statistics after passing the back-end for initialization: * Number of independent subsystems: 1046 * Number of states: 0 () * Number of discrete variables: 123 ($whenCondition8,$PRE.ret2.loa.nextTimeEvent,$whenCondition7,$PRE.apa2.loa.nextTimeEvent,$whenCondition6,$PRE.larOff4.loa.nextTimeEvent,$whenCondition5,$PRE.larOff3.loa.nextTimeEvent,$whenCondition4,$PRE.apa1.loa.nextTimeEvent,$whenCondition3,$PRE.larOff2.loa.nextTimeEvent,$whenCondition2,$PRE.ret1.loa.nextTimeEvent,$whenCondition1,$PRE.larOff1.loa.nextTimeEvent,ret2.pumChi.eff.per.havePressureCurve,ret2.pumChi.eff.haveMinimumDecrease,ret2.pumChi.eff.haveDPMax,ret2.pumHotWat.eff.per.havePressureCurve,ret2.pumHotWat.eff.haveMinimumDecrease,ret2.pumHotWat.eff.haveDPMax,ret2.pumHea.eff.per.havePressureCurve,ret2.pumHea.eff.haveMinimumDecrease,ret2.pumHea.eff.haveDPMax,apa2.pumChi.eff.per.havePressureCurve,apa2.pumChi.eff.haveMinimumDecrease,apa2.pumChi.eff.haveDPMax,apa2.pumHotWat.eff.per.havePressureCurve,apa2.pumHotWat.eff.haveMinimumDecrease,apa2.pumHotWat.eff.haveDPMax,apa2.pumHea.eff.per.havePressureCurve,apa2.pumHea.eff.haveMinimumDecrease,apa2.pumHea.eff.haveDPMax,larOff4.pumChi.eff.per.havePressureCurve,larOff4.pumChi.eff.haveMinimumDecrease,larOff4.pumChi.eff.haveDPMax,larOff4.pumHotWat.eff.per.havePressureCurve,larOff4.pumHotWat.eff.haveMinimumDecrease,larOff4.pumHotWat.eff.haveDPMax,larOff4.pumHea.eff.per.havePressureCurve,larOff4.pumHea.eff.haveMinimumDecrease,larOff4.pumHea.eff.haveDPMax,larOff3.pumChi.eff.per.havePressureCurve,larOff3.pumChi.eff.haveMinimumDecrease,larOff3.pumChi.eff.haveDPMax,larOff3.pumHotWat.eff.per.havePressureCurve,larOff3.pumHotWat.eff.haveMinimumDecrease,larOff3.pumHotWat.eff.haveDPMax,larOff3.pumHea.eff.per.havePressureCurve,larOff3.pumHea.eff.haveMinimumDecrease,larOff3.pumHea.eff.haveDPMax,apa1.pumChi.eff.per.havePressureCurve,apa1.pumChi.eff.haveMinimumDecrease,apa1.pumChi.eff.haveDPMax,apa1.pumHotWat.eff.per.havePressureCurve,apa1.pumHotWat.eff.haveMinimumDecrease,apa1.pumHotWat.eff.haveDPMax,apa1.pumHea.eff.per.havePressureCurve,apa1.pumHea.eff.haveMinimumDecrease,apa1.pumHea.eff.haveDPMax,larOff2.pumChi.eff.per.havePressureCurve,larOff2.pumChi.eff.haveMinimumDecrease,larOff2.pumChi.eff.haveDPMax,larOff2.pumHotWat.eff.per.havePressureCurve,larOff2.pumHotWat.eff.haveMinimumDecrease,larOff2.pumHotWat.eff.haveDPMax,larOff2.pumHea.eff.per.havePressureCurve,larOff2.pumHea.eff.haveMinimumDecrease,larOff2.pumHea.eff.haveDPMax,ret1.pumChi.eff.per.havePressureCurve,ret1.pumChi.eff.haveMinimumDecrease,ret1.pumChi.eff.haveDPMax,ret1.pumHotWat.eff.per.havePressureCurve,ret1.pumHotWat.eff.haveMinimumDecrease,ret1.pumHotWat.eff.haveDPMax,ret1.pumHea.eff.per.havePressureCurve,ret1.pumHea.eff.haveMinimumDecrease,ret1.pumHea.eff.haveDPMax,larOff1.pumChi.eff.per.havePressureCurve,larOff1.pumChi.eff.haveMinimumDecrease,larOff1.pumChi.eff.haveDPMax,larOff1.pumHotWat.eff.per.havePressureCurve,larOff1.pumHotWat.eff.haveMinimumDecrease,larOff1.pumHotWat.eff.haveDPMax,larOff1.pumHea.eff.per.havePressureCurve,larOff1.pumHea.eff.haveMinimumDecrease,larOff1.pumHea.eff.haveDPMax,$whenCondition10,$whenCondition9,larOff1.loa.nextTimeEvent,$PRE.larOff1.loa.nextTimeEventScaled,larOff1.loa.nextTimeEventScaled,ret1.loa.nextTimeEvent,$PRE.ret1.loa.nextTimeEventScaled,ret1.loa.nextTimeEventScaled,larOff2.loa.nextTimeEvent,$PRE.larOff2.loa.nextTimeEventScaled,larOff2.loa.nextTimeEventScaled,apa1.loa.nextTimeEvent,$PRE.apa1.loa.nextTimeEventScaled,apa1.loa.nextTimeEventScaled,larOff3.loa.nextTimeEvent,$PRE.larOff3.loa.nextTimeEventScaled,larOff3.loa.nextTimeEventScaled,larOff4.loa.nextTimeEvent,$PRE.larOff4.loa.nextTimeEventScaled,larOff4.loa.nextTimeEventScaled,apa2.loa.nextTimeEvent,$PRE.apa2.loa.nextTimeEventScaled,apa2.loa.nextTimeEventScaled,ret2.loa.nextTimeEvent,$PRE.ret2.loa.nextTimeEventScaled,ret2.loa.nextTimeEventScaled,$PRE.weaDat.conTimMin.tNext,weaDat.conTimMin.tNext,$PRE.weaDat.conTim.tNext,weaDat.conTim.tNext,ETheCoo.local_reset,ETheHotWat.local_reset,ETheHea.local_reset,EEleCoo.local_reset,EEleHea.local_reset) * Number of discrete states: 0 () * Number of clocked states: 0 () * Top-level inputs: 0 Notification: Strong component statistics for initialization (3013): * Single equations (assignments): 2941 * Array equations: 24 * Algorithm blocks: 0 * Record equations: 24 * When equations: 0 * If-equations: 0 * Equation systems (linear and non-linear blocks): 0 * Torn equation systems: 24 * Mixed (continuous/discrete) equation systems: 0 Notification: Torn system details for strict tearing set: * Linear torn systems: 0 * Non-linear torn systems: 24 {1 11,1 11,1 11,1 11,1 11,1 11,1 11,1 11,1 11,1 11,1 11,1 11,1 11,1 11,1 11,1 11,1 11,1 11,1 11,1 11,1 11,1 11,1 11,1 11} Notification: Performance of prepare postOptimizeDAE: time 0.02348/9.542, allocations: 10.42 MB / 4.79 GB, free: 0.8213 GB / 2.042 GB Notification: Performance of postOpt lateInlineFunction (simulation): time 0.009204/9.551, allocations: 4.599 MB / 4.795 GB, free: 0.8167 GB / 2.042 GB Notification: Performance of postOpt wrapFunctionCalls (simulation): time 0.1063/9.657, allocations: 52.41 MB / 4.846 GB, free: 0.7659 GB / 2.042 GB Notification: Performance of postOpt inlineArrayEqn (simulation): time 0.0002077/9.658, allocations: 243.9 kB / 4.846 GB, free: 0.7657 GB / 2.042 GB Notification: Performance of postOpt constantLinearSystem (simulation): time 4.092e-05/9.658, allocations: 8 kB / 4.846 GB, free: 0.7657 GB / 2.042 GB Notification: Performance of postOpt simplifysemiLinear (simulation): time 0.07926/9.737, allocations: 33.32 MB / 4.879 GB, free: 0.733 GB / 2.042 GB Warning: The model contains alias variables with redundant start and/or conflicting nominal values. It is recommended to resolve the conflicts, because otherwise the system could be hard to solve. To print the conflicting alias sets and the chosen candidates please use -d=aliasConflicts. Notification: Performance of postOpt removeSimpleEquations (simulation): time 0.1727/9.91, allocations: 93.4 MB / 4.97 GB, free: 0.6415 GB / 2.042 GB Notification: Performance of postOpt simplifyComplexFunction (simulation): time 5.973e-05/9.91, allocations: 28 kB / 4.97 GB, free: 0.6414 GB / 2.042 GB Notification: Performance of postOpt solveSimpleEquations (simulation): time 0.01637/9.926, allocations: 4.23 MB / 4.974 GB, free: 0.6373 GB / 2.042 GB Notification: Performance of postOpt tearingSystem (simulation): time 0.0191/9.945, allocations: 7.369 MB / 4.981 GB, free: 0.6301 GB / 2.042 GB Notification: Performance of postOpt inputDerivativesUsed (simulation): time 0.001546/9.947, allocations: 0.5621 MB / 4.982 GB, free: 0.6295 GB / 2.042 GB Notification: Performance of postOpt calculateStrongComponentJacobians (simulation): time 0.02435/9.971, allocations: 22.06 MB / 5.003 GB, free: 0.6075 GB / 2.042 GB Notification: Performance of postOpt calculateStateSetsJacobians (simulation): time 1.619e-05/9.971, allocations: 43.81 kB / 5.003 GB, free: 0.6074 GB / 2.042 GB Notification: Performance of postOpt symbolicJacobian (simulation): time 0.1236/10.09, allocations: 61.58 MB / 5.064 GB, free: 0.5466 GB / 2.042 GB Notification: Performance of postOpt removeConstants (simulation): time 0.02173/10.12, allocations: 9.209 MB / 5.073 GB, free: 0.5376 GB / 2.042 GB Notification: Performance of postOpt simplifyTimeIndepFuncCalls (simulation): time 0.01018/10.13, allocations: 380 kB / 5.073 GB, free: 0.5372 GB / 2.042 GB Notification: Performance of postOpt simplifyAllExpressions (simulation): time 0.03672/10.16, allocations: 4.684 MB / 5.077 GB, free: 0.5326 GB / 2.042 GB Notification: Performance of postOpt findZeroCrossings (simulation): time 0.001454/10.16, allocations: 1.27 MB / 5.079 GB, free: 0.5314 GB / 2.042 GB Notification: Performance of postOpt collapseArrayExpressions (simulation): time 0.001965/10.17, allocations: 0.9246 MB / 5.08 GB, free: 0.5305 GB / 2.042 GB Notification: Performance of sorting global known variables: time 0.04945/10.22, allocations: 30.35 MB / 5.109 GB, free: 0.5011 GB / 2.042 GB Notification: Performance of sort global known variables: time 4.31e-07/10.22, allocations: 0 / 5.109 GB, free: 0.5011 GB / 2.042 GB Notification: Performance of remove unused functions: time 0.06972/10.29, allocations: 23.98 MB / 5.133 GB, free: 489.6 MB / 2.042 GB Notification: Model statistics after passing the back-end for simulation: * Number of independent subsystems: 129 * Number of states: 5 (EEleHea.y,EEleCoo.y,ETheHea.y,ETheHotWat.y,ETheCoo.y) * Number of discrete variables: 28 ($whenCondition10,$whenCondition9,$whenCondition8,$whenCondition7,$whenCondition6,$whenCondition5,$whenCondition4,$whenCondition3,$whenCondition2,$whenCondition1,larOff1.loa.nextTimeEvent,larOff1.loa.nextTimeEventScaled,ret1.loa.nextTimeEvent,ret1.loa.nextTimeEventScaled,larOff2.loa.nextTimeEvent,larOff2.loa.nextTimeEventScaled,apa1.loa.nextTimeEvent,apa1.loa.nextTimeEventScaled,larOff3.loa.nextTimeEvent,larOff3.loa.nextTimeEventScaled,larOff4.loa.nextTimeEvent,larOff4.loa.nextTimeEventScaled,apa2.loa.nextTimeEvent,apa2.loa.nextTimeEventScaled,ret2.loa.nextTimeEvent,ret2.loa.nextTimeEventScaled,weaDat.conTimMin.tNext,weaDat.conTim.tNext) * Number of discrete states: 18 (ret2.loa.nextTimeEvent,apa2.loa.nextTimeEvent,larOff4.loa.nextTimeEvent,larOff3.loa.nextTimeEvent,apa1.loa.nextTimeEvent,larOff2.loa.nextTimeEvent,ret1.loa.nextTimeEvent,larOff1.loa.nextTimeEvent,weaDat.conTim.tNext,weaDat.conTimMin.tNext,ret2.loa.nextTimeEventScaled,apa2.loa.nextTimeEventScaled,larOff4.loa.nextTimeEventScaled,larOff3.loa.nextTimeEventScaled,apa1.loa.nextTimeEventScaled,larOff2.loa.nextTimeEventScaled,ret1.loa.nextTimeEventScaled,larOff1.loa.nextTimeEventScaled) * Number of clocked states: 0 () * Top-level inputs: 0 Notification: Strong component statistics for simulation (1761): * Single equations (assignments): 1599 * Array equations: 0 * Algorithm blocks: 0 * Record equations: 120 * When equations: 18 * If-equations: 0 * Equation systems (linear and non-linear blocks): 0 * Torn equation systems: 24 * Mixed (continuous/discrete) equation systems: 0 Notification: Torn system details for strict tearing set: * Linear torn systems: 0 * Non-linear torn systems: 24 {1 12,1 12,1 12,1 12,1 12,1 12,1 12,1 12,1 12,1 12,1 12,1 12,1 12,1 12,1 12,1 12,1 12,1 12,1 12,1 12,1 12,1 12,1 12,1 12} Notification: Performance of Backend phase and start with SimCode phase: time 0.1199/10.41, allocations: 68.28 MB / 5.199 GB, free: 421.4 MB / 2.042 GB Notification: Performance of simCode: created initialization part: time 0.1018/10.51, allocations: 54.62 MB / 5.253 GB, free: 366.9 MB / 2.042 GB Notification: Performance of simCode: created event and clocks part: time 3.153e-05/10.51, allocations: 26.58 kB / 5.253 GB, free: 366.8 MB / 2.042 GB Notification: Performance of simCode: created simulation system equations: time 0.03004/10.54, allocations: 15.45 MB / 5.268 GB, free: 351.4 MB / 2.042 GB Notification: Performance of simCode: created of all other equations (e.g. parameter, nominal, assert, etc): time 0.3295/10.87, allocations: 22.33 MB / 5.29 GB, free: 329.4 MB / 2.042 GB Warning: Could not resolve URI (uri) at compile-time; copying all loaded packages into the FMU Notification: Performance of simCode: created linear, non-linear and system jacobian parts: time 4.555/15.42, allocations: 1.1 GB / 6.389 GB, free: 0.918 GB / 2.042 GB Notification: Performance of simCode: some other stuff during SimCode phase: time 0.0273/15.45, allocations: 20.89 MB / 6.41 GB, free: 0.9148 GB / 2.042 GB Notification: Performance of simCode: alias equations: time 0.05141/15.5, allocations: 10.9 MB / 6.42 GB, free: 0.9141 GB / 2.042 GB Notification: Performance of simCode: all other stuff during SimCode phase: time 0.03353/15.53, allocations: 25.99 MB / 6.446 GB, free: 0.8932 GB / 2.042 GB Notification: Performance of SimCode: time 5.01e-07/15.53, allocations: 3.438 kB / 6.446 GB, free: 0.8932 GB / 2.042 GB Notification: Performance of buildModelFMU: Generate the FMI files: time 15.26/30.79, allocations: 1.318 GB / 7.763 GB, free: 0.6502 GB / 2.042 GB Notification: Performance of buildModelFMU: configured platform static using cached values: time 0.0001799/30.79, allocations: 299.9 kB / 7.764 GB, free: 0.6499 GB / 2.042 GB Error: Error building simulator. Build log: clang -Os -fPIC -falign-functions -mfpmath=sse -fno-dollars-in-identifiers -Wno-parentheses-equality -I'/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/c/fmi' -DOMC_FMI_RUNTIME=1 -DCMINPACK_NO_DLL=1 "-I/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/Resources/C-Sources" -c -o Buildings_8_0_0_Buildings_Obsolete_DistrictHeatingCooling_Examples_HeatingCoolingHotWater3ClustersBaseCase.o Buildings_8_0_0_Buildings_Obsolete_DistrictHeatingCooling_Examples_HeatingCoolingHotWater3ClustersBaseCase.c In file included from Buildings_8_0_0_Buildings_Obsolete_DistrictHeatingCooling_Examples_HeatingCoolingHotWater3ClustersBaseCase.c:7: In file included from ./Buildings_8_0_0_Buildings_Obsolete_DistrictHeatingCooling_Examples_HeatingCoolingHotWater3ClustersBaseCase_model.h:5: In file included from ./openmodelica.h:71: In file included from ./gc/../openmodelica_types.h:144: ./gc/omc_gc.h:219:28: warning: expression result unused [-Wunused-value] GC_register_displacement(0); ^ ./gc/omc_gc.h:223:34: warning: expression result unused [-Wunused-value] GC_set_force_unmap_on_gcollect(1); ^ 2 warnings generated. clang -Os -fPIC -falign-functions -mfpmath=sse -fno-dollars-in-identifiers -Wno-parentheses-equality -I'/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/c/fmi' -DOMC_FMI_RUNTIME=1 -DCMINPACK_NO_DLL=1 "-I/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/Resources/C-Sources" -c -o Buildings_8_0_0_Buildings_Obsolete_DistrictHeatingCooling_Examples_HeatingCoolingHotWater3ClustersBaseCase_functions.o Buildings_8_0_0_Buildings_Obsolete_DistrictHeatingCooling_Examples_HeatingCoolingHotWater3ClustersBaseCase_functions.c In file included from Buildings_8_0_0_Buildings_Obsolete_DistrictHeatingCooling_Examples_HeatingCoolingHotWater3ClustersBaseCase_functions.c:2: In file included from ./Buildings_8_0_0_Buildings_Obsolete_DistrictHeatingCooling_Examples_HeatingCoolingHotWater3ClustersBaseCase_functions.h:3: In file included from ./meta/meta_modelica.h:49: ./gc/omc_gc.h:219:28: warning: expression result unused [-Wunused-value] GC_register_displacement(0); ^ ./gc/omc_gc.h:223:34: warning: expression result unused [-Wunused-value] GC_set_force_unmap_on_gcollect(1); ^ In file included from Buildings_8_0_0_Buildings_Obsolete_DistrictHeatingCooling_Examples_HeatingCoolingHotWater3ClustersBaseCase_functions.c:7: In file included from ./Buildings_8_0_0_Buildings_Obsolete_DistrictHeatingCooling_Examples_HeatingCoolingHotWater3ClustersBaseCase_includes.h:4: /home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 8.0.0/Resources/C-Sources/getTimeSpan.c:6:10: fatal error: 'ModelicaUtilities.h' file not found #include ^~~~~~~~~~~~~~~~~~~~~ 2 warnings and 1 error generated. make: *** [: Buildings_8_0_0_Buildings_Obsolete_DistrictHeatingCooling_Examples_HeatingCoolingHotWater3ClustersBaseCase_functions.o] Error 1