Running: ./testmodel.py --libraries=/home/hudson/saved_omc/libraries/.openmodelica/libraries --ompython_omhome=/usr TransiEnt_TransiEnt.Consumer.Heat.Check.TestConsumer.conf.json
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/DymolaCommands master/package.mo", uses=false) [Timeout 180]
"Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/DymolaCommands master/package.mo): time 0.000619/0.000619, allocations: 24.45 kB / 9.873 MB, free: 0.8203 MB / 10.45 MB
Notification: Performance of NFInstanceAPI.mkTop(<interactive>): time 0.001508/0.002127, allocations: 421.9 kB / 10.28 MB, free: 420 kB / 10.45 MB
"
[Timeout remaining time 180]
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/package.mo", uses=false) [Timeout 180]
"[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Control/PredictorModels_3508/Check/package.mo:2:1-21:10:writable] Warning: The package.order file contains a class TestReheater, which is expected to be stored in file TestReheater.mo, but seems to be named testReheater.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Control/PredictorModels_3508/Check/testReheater.mo:2:1-117:17:writable] Warning: Expected the package to have name testReheater, but got TestReheater. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/package.mo:2:1-23:10:writable] Warning: PhysicalMills was referenced in the package.order file, but was not found in package.mo, PhysicalMills/package.mo or PhysicalMills.mo.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/package.mo:2:1-22:18:writable] Warning: Expected the package to have name physicalMills, but got PhysicalMills. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/package.mo:2:1-22:18:writable] Warning: The package.order file contains a class Mill_L4_advancedInit, which is expected to be stored in file Mill_L4_advancedInit.mo, but seems to be named mill_L4_advancedInit.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/package.mo:2:1-22:18:writable] Warning: The package.order file contains a class Mill_L4, which is expected to be stored in file Mill_L4.mo, but seems to be named mill_L4.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/mill_L4_advancedInit.mo:2:1-58:25:writable] Warning: Expected the package to have name mill_L4_advancedInit, but got Mill_L4_advancedInit. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/mill_L4_advancedInit.mo:2:1-58:25:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills; but got within ClaRa.Components.Mills.PhysicalMills; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/mill_L4.mo:2:1-315:12:writable] Warning: Expected the package to have name mill_L4, but got Mill_L4. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/mill_L4.mo:2:1-315:12:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills; but got within ClaRa.Components.Mills.PhysicalMills; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/package.mo:2:1-21:10:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills; but got within ClaRa.Components.Mills.PhysicalMills; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/package.mo:2:1-21:10:writable] Warning: The package.order file contains a class TestMillBox_2, which is expected to be stored in file TestMillBox_2.mo, but seems to be named testMillBox_2.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/package.mo:2:1-21:10:writable] Warning: The package.order file contains a class TestMillBox_1_measurementInput, which is expected to be stored in file TestMillBox_1_measurementInput.mo, but seems to be named testMillBox_1_measurementInput.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/package.mo:2:1-21:10:writable] Warning: The package.order file contains a class TestMillBox_1, which is expected to be stored in file TestMillBox_1.mo, but seems to be named testMillBox_1.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/testMillBox_2.mo:2:1-297:18:writable] Warning: Expected the package to have name testMillBox_2, but got TestMillBox_2. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/testMillBox_2.mo:2:1-297:18:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Check; but got within ClaRa.Components.Mills.PhysicalMills.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/testMillBox_1_measurementInput.mo:2:1-1342:35:writable] Warning: Expected the package to have name testMillBox_1_measurementInput, but got TestMillBox_1_measurementInput. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/testMillBox_1_measurementInput.mo:2:1-1342:35:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Check; but got within ClaRa.Components.Mills.PhysicalMills.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/testMillBox_1.mo:2:1-465:18:writable] Warning: Expected the package to have name testMillBox_1, but got TestMillBox_1. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/testMillBox_1.mo:2:1-465:18:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Check; but got within ClaRa.Components.Mills.PhysicalMills.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/package.mo:2:1-29:12:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills; but got within ClaRa.Components.Mills.PhysicalMills; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/FlowClassifier.mo:2:1-346:19:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/CentrifugalClassifier.mo:2:1-380:26:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/GrinderRingRoller.mo:2:1-294:22:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/FuelJoin_distributed.mo:2:1-133:25:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Dryer.mo:2:1-301:10:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/package.mo:2:1-20:17:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/package.mo:2:1-20:13:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Transport_Velocity/package.mo:2:1-20:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Transport_Velocity/Transport_complex.mo:2:1-71:22:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Transport_Velocity/Transport_constant.mo:2:1-49:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Transport_Velocity/Transport_base.mo:2:1-52:19:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Selection_Function/package.mo:2:1-20:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Selection_Function/Selection_Kersting.mo:2:1-80:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Selection_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Selection_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Selection_Function/Selection_Steinmetz.mo:2:1-104:24:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Selection_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Selection_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Selection_Function/Selection_constant.mo:2:1-45:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Selection_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Selection_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Selection_Function/Selection_base.mo:2:1-50:19:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Selection_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Selection_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Breakage_Function/package.mo:2:1-20:22:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Breakage_Function/Breakage_Austin.mo:2:1-109:20:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Breakage_Function/Breakage_Steinmetz.mo:2:1-106:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Breakage_Function/Breakage_constant.mo:2:1-45:22:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Breakage_Function/Breakage_base.mo:2:1-51:18:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Drying/package.mo:2:1-20:11:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Drying/Drying_ideal.mo:2:1-58:17:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Drying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Drying; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Drying/Drying_base.mo:2:1-44:16:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Drying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Drying; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Classifying/package.mo:2:1-20:16:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Classifying/Classifying_flow.mo:2:1-111:21:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Classifying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Classifying; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Classifying/Classifying_centrifugal.mo:2:1-153:28:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Classifying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Classifying; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Classifying/Classifying_centrifugal_base.mo:2:1-45:33:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Classifying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Classifying; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Classifying/Classifying_flow_base.mo:2:1-45:26:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Classifying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Classifying; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/package.mo:2:1-20:12:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/iCom_Dryer.mo:2:1-57:15:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/iCom_FlowClassifier.mo:2:1-67:24:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/iCom_CentrifugalClassifier.mo:2:1-69:31:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/iCom_Grinder.mo:2:1-61:17:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/FuelClassification_example_21classes.mo:2:1-43:41:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/GeometricProgression.mo:2:1-56:25:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/FuelClassification_generic.mo:2:1-43:31:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/FuelClassification_example_05classes.mo:2:1-43:41:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/FuelClassification_example_11classes.mo:2:1-43:41:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/FuelClassification_base.mo:2:1-61:28:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/package.mo:2:1-23:10:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/package.mo:2:1-23:10:writable] Warning: The package.order file contains a class TestFuelJoin, which is expected to be stored in file TestFuelJoin.mo, but seems to be named testFuelJoin.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/package.mo:2:1-23:10:writable] Warning: The package.order file contains a class TestAerosolVolume, which is expected to be stored in file TestAerosolVolume.mo, but seems to be named testAerosolVolume.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/package.mo:2:1-23:10:writable] Warning: The package.order file contains a class TestDryer, which is expected to be stored in file TestDryer.mo, but seems to be named testDryer.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/package.mo:2:1-23:10:writable] Warning: The package.order file contains a class TestGrinder, which is expected to be stored in file TestGrinder.mo, but seems to be named testGrinder.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testFuelJoin.mo:2:1-93:17:writable] Warning: Expected the package to have name testFuelJoin, but got TestFuelJoin. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testFuelJoin.mo:2:1-93:17:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Check; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testAerosolVolume.mo:2:1-176:22:writable] Warning: Expected the package to have name testAerosolVolume, but got TestAerosolVolume. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testAerosolVolume.mo:2:1-176:22:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Check; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testDryer.mo:2:1-93:14:writable] Warning: Expected the package to have name testDryer, but got TestDryer. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testDryer.mo:2:1-93:14:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Check; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testGrinder.mo:2:1-154:16:writable] Warning: Expected the package to have name testGrinder, but got TestGrinder. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testGrinder.mo:2:1-154:16:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Check; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/package.mo): time 0.5965/0.5965, allocations: 100.7 MB / 111.7 MB, free: 14.49 MB / 122.8 MB
Notification: Performance of NFInstanceAPI.mkTop(<interactive>): time 0.107/0.7035, allocations: 28.1 MB / 139.8 MB, free: 6.168 MB / 138.8 MB
"
[Timeout remaining time 179]
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-ClaRa/package.mo", uses=false) [Timeout 180]
"Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-ClaRa/package.mo): time 0.0606/0.0606, allocations: 16.03 MB / 156.7 MB, free: 5.711 MB / 154.8 MB
Notification: Performance of NFInstanceAPI.mkTop(<interactive>): time 0.01104/0.07163, allocations: 6.784 MB / 163.5 MB, free: 14.91 MB / 170.8 MB
"
[Timeout remaining time 180]
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.1.0+maint.om/package.mo", uses=false) [Timeout 180]
"Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.1.0+maint.om/package.mo): time 0.0008562/0.0008562, allocations: 84.14 kB / 164.3 MB, free: 14.09 MB / 170.8 MB
Notification: Performance of NFInstanceAPI.mkTop(<interactive>): time 0.00102/0.001876, allocations: 436.4 kB / 164.8 MB, free: 13.66 MB / 170.8 MB
"
[Timeout remaining time 180]
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.1.0+maint.om/package.mo", uses=false) [Timeout 180]
"Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.1.0+maint.om/package.mo): time 0.0007242/0.0007242, allocations: 162.9 kB / 165.7 MB, free: 12.77 MB / 170.8 MB
Notification: Performance of NFInstanceAPI.mkTop(<interactive>): time 0.0009697/0.001694, allocations: 479.2 kB / 166.1 MB, free: 12.3 MB / 170.8 MB
"
[Timeout remaining time 180]
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.1.0+maint.om/package.mo", uses=false) [Timeout 180]
"Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.1.0+maint.om/package.mo): time 1.02/1.02, allocations: 177.1 MB / 344 MB, free: 6.094 MB / 330.8 MB
Notification: Performance of NFInstanceAPI.mkTop(<interactive>): time 0.1053/1.125, allocations: 53.68 MB / 397.7 MB, free: 316 kB / 378.8 MB
"
[Timeout remaining time 179]
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.2/package.mo", uses=false) [Timeout 180]
"Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.2/package.mo): time 1.997/1.997, allocations: 376.9 MB / 0.7572 GB, free: 10.29 MB / 0.7293 GB
Notification: Performance of NFInstanceAPI.mkTop(<interactive>): time 0.2158/2.213, allocations: 123.2 MB / 0.8775 GB, free: 15.09 MB / 0.8543 GB
"
[Timeout remaining time 178]
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.3-master/package.mo", uses=false) [Timeout 180]
"[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.3-master/Basics/Interfaces/Thermal/package.mo:2:1-91:12:writable] Warning: The package.order file contains a class FluidPortOut_simple, which is expected to be stored in file FluidPortOut_simple.mo, but seems to be named fluidPortOut_simple.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.3-master/Basics/Interfaces/Thermal/package.mo:2:1-91:12:writable] Warning: The package.order file contains a class FluidPortIn_simple, which is expected to be stored in file FluidPortIn_simple.mo, but seems to be named fluidPortIn_simple.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.3-master/Basics/Interfaces/Thermal/fluidPortOut_simple.mo:2:1-49:24:writable] Warning: Expected the package to have name fluidPortOut_simple, but got FluidPortOut_simple. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.3-master/Basics/Interfaces/Thermal/fluidPortIn_simple.mo:2:1-50:23:writable] Warning: Expected the package to have name fluidPortIn_simple, but got FluidPortIn_simple. Proceeding since only the case of the names are different.
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.3-master/package.mo): time 1.872/1.872, allocations: 241.5 MB / 1.114 GB, free: 3.188 MB / 1.058 GB
Notification: Performance of NFInstanceAPI.mkTop(<interactive>): time 0.1321/2.004, allocations: 70.61 MB / 1.183 GB, free: 4 kB / 1.12 GB
"
[Timeout remaining time 178]
Using package TransiEnt with version 2.0.3 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.3-master/package.mo)
Using package Buildings with version 12.1.2 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.2/package.mo)
Using package Modelica with version 4.1.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.1.0+maint.om/package.mo)
Using package Complex with version 4.1.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.1.0+maint.om/package.mo)
Using package ModelicaServices with version 4.1.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.1.0+maint.om/package.mo)
Using package TILMedia with version 1.8.1 ClaRa (/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-ClaRa/package.mo)
Using package ClaRa with version 1.8.1 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/package.mo)
Using package DymolaCommands with version 0.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/DymolaCommands master/package.mo)
Running command: setCommandLineOptions("--fmiFlags=s:cvode")
Running command: "" <> buildModelFMU(TransiEnt.Consumer.Heat.Check.TestConsumer,fileNamePrefix="TransiEnt_TransiEnt_Consumer_Heat_Check_TestConsumer",fmuType="me_cs",version="2.0+3.0",platforms={"static"})
"" <> buildModelFMU(TransiEnt.Consumer.Heat.Check.TestConsumer,fileNamePrefix="TransiEnt_TransiEnt_Consumer_Heat_Check_TestConsumer",fmuType="me_cs",version="2.0+3.0",platforms={"static"}) [Timeout 660]
"Notification: Performance of FrontEnd - loaded program: time 1.563e-06/1.563e-06, allocations: 0 / 1.185 GB, free: 14.32 MB / 1.136 GB
Notification: Performance of FrontEnd - Absyn->SCode: time 8.046e-06/9.609e-06, allocations: 2.312 kB / 1.185 GB, free: 14.32 MB / 1.136 GB
Notification: Performance of NFInst.instantiate(TransiEnt.Consumer.Heat.Check.TestConsumer): time 0.006406/0.006416, allocations: 8.764 MB / 1.193 GB, free: 5.504 MB / 1.136 GB
Notification: Performance of NFInst.instExpressions: time 0.003949/0.01036, allocations: 3.551 MB / 1.197 GB, free: 1.941 MB / 1.136 GB
Notification: Performance of NFInst.updateImplicitVariability: time 0.0005334/0.0109, allocations: 63.62 kB / 1.197 GB, free: 1.879 MB / 1.136 GB
Notification: Performance of NFTyping.typeComponents: time 0.000475/0.01137, allocations: 328.6 kB / 1.197 GB, free: 1.555 MB / 1.136 GB
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.3-master/Basics/Functions/fullPathName.mo:2:1-76:17:writable] Warning: Pure function 'TransiEnt.Basics.Functions.fullPathName' contains a call to impure function 'Modelica.Utilities.Streams.print'.
Notification: Performance of NFTyping.typeBindings: time 0.0007628/0.01214, allocations: 0.5925 MB / 1.198 GB, free: 0.957 MB / 1.136 GB
Notification: Performance of NFTyping.typeClassSections: time 0.0009999/0.01314, allocations: 0.9591 MB / 1.199 GB, free: 15.99 MB / 1.151 GB
Notification: Performance of NFFlatten.flatten: time 0.001505/0.01464, allocations: 2.413 MB / 1.201 GB, free: 13.57 MB / 1.151 GB
Notification: Performance of NFFlatten.resolveConnections: time 0.001007/0.01565, allocations: 1.219 MB / 1.202 GB, free: 12.29 MB / 1.151 GB
Notification: Performance of NFEvalConstants.evaluate: time 0.001026/0.01667, allocations: 1.392 MB / 1.203 GB, free: 10.88 MB / 1.151 GB
Notification: Performance of NFSimplifyModel.simplify: time 0.0005493/0.01722, allocations: 0.6346 MB / 1.204 GB, free: 10.25 MB / 1.151 GB
Notification: Performance of NFPackage.collectConstants: time 0.0001862/0.01741, allocations: 216 kB / 1.204 GB, free: 10.04 MB / 1.151 GB
Notification: Performance of NFFlatten.collectFunctions: time 0.0003646/0.01777, allocations: 367.7 kB / 1.205 GB, free: 9.676 MB / 1.151 GB
Notification: Performance of NFScalarize.scalarize: time 0.0002118/0.01799, allocations: 350.8 kB / 1.205 GB, free: 9.332 MB / 1.151 GB
Notification: Performance of NFVerifyModel.verify: time 0.0003921/0.01838, allocations: 0.534 MB / 1.206 GB, free: 8.797 MB / 1.151 GB
Notification: Performance of NFConvertDAE.convert: time 0.001074/0.01945, allocations: 1.444 MB / 1.207 GB, free: 7.348 MB / 1.151 GB
Notification: Performance of FrontEnd - DAE generated: time 1.149e-05/0.01946, allocations: 0 / 1.207 GB, free: 7.348 MB / 1.151 GB
Notification: Performance of FrontEnd: time 7.12e-07/0.01946, allocations: 8 kB / 1.207 GB, free: 7.34 MB / 1.151 GB
Notification: Performance of Transformations before backend: time 1.926e-05/0.01948, allocations: 0 / 1.207 GB, free: 7.34 MB / 1.151 GB
Notification: Model statistics after passing the front-end and creating the data structures used by the back-end:
 * Number of equations: 363
 * Number of variables: 363
Notification: Performance of Generate backend data structure: time 0.00238/0.02186, allocations: 2.558 MB / 1.209 GB, free: 4.742 MB / 1.151 GB
Notification: Performance of prepare preOptimizeDAE: time 3.204e-05/0.0219, allocations: 8.031 kB / 1.209 GB, free: 4.734 MB / 1.151 GB
Notification: Performance of preOpt introduceOutputAliases (simulation): time 0.0001523/0.02205, allocations: 231 kB / 1.21 GB, free: 4.5 MB / 1.151 GB
Notification: Performance of preOpt normalInlineFunction (simulation): time 0.0003334/0.02238, allocations: 349.7 kB / 1.21 GB, free: 4.141 MB / 1.151 GB
Notification: Performance of preOpt evaluateParameters (simulation): time 0.000764/0.02315, allocations: 0.7025 MB / 1.211 GB, free: 3.398 MB / 1.151 GB
Notification: Performance of preOpt simplifyIfEquations (simulation): time 0.0001306/0.02328, allocations: 273.6 kB / 1.211 GB, free: 3.094 MB / 1.151 GB
Notification: Performance of preOpt expandDerOperator (simulation): time 0.0001202/0.0234, allocations: 151.9 kB / 1.211 GB, free: 2.945 MB / 1.151 GB
Notification: Performance of preOpt clockPartitioning (simulation): time 0.001115/0.02451, allocations: 1.328 MB / 1.212 GB, free: 1.469 MB / 1.151 GB
Notification: Performance of preOpt findStateOrder (simulation): time 2.399e-05/0.02454, allocations: 0 / 1.212 GB, free: 1.469 MB / 1.151 GB
Notification: Performance of preOpt replaceEdgeChange (simulation): time 6.807e-05/0.0246, allocations: 60 kB / 1.212 GB, free: 1.41 MB / 1.151 GB
Notification: Performance of preOpt inlineArrayEqn (simulation): time 1.996e-05/0.02462, allocations: 32 kB / 1.212 GB, free: 1.379 MB / 1.151 GB
Notification: Performance of preOpt removeEqualRHS (simulation): time 0.0005245/0.02515, allocations: 400 kB / 1.213 GB, free: 0.9883 MB / 1.151 GB
Notification: Performance of preOpt removeSimpleEquations (simulation): time 0.00337/0.02852, allocations: 3.538 MB / 1.216 GB, free: 13.36 MB / 1.167 GB
Notification: Performance of preOpt comSubExp (simulation): time 0.0005727/0.02909, allocations: 485.4 kB / 1.217 GB, free: 12.84 MB / 1.167 GB
Notification: Performance of preOpt resolveLoops (simulation): time 0.0001861/0.02928, allocations: 151.4 kB / 1.217 GB, free: 12.68 MB / 1.167 GB
Notification: Performance of preOpt evalFunc (simulation): time 4.659e-05/0.02932, allocations: 16 kB / 1.217 GB, free: 12.67 MB / 1.167 GB
Notification: Performance of preOpt encapsulateWhenConditions (simulation): time 0.0003359/0.02966, allocations: 338.8 kB / 1.217 GB, free: 12.31 MB / 1.167 GB
Notification: Performance of pre-optimization done (n=85): time 1.814e-06/0.02966, allocations: 4 kB / 1.217 GB, free: 12.31 MB / 1.167 GB
Notification: Performance of matching and sorting (n=85): time 0.0006053/0.03027, allocations: 467.1 kB / 1.218 GB, free: 11.85 MB / 1.167 GB
Notification: Performance of inlineWhenForInitialization (initialization): time 0.0001169/0.03038, allocations: 379.8 kB / 1.218 GB, free: 11.39 MB / 1.167 GB
Notification: Performance of selectInitializationVariablesDAE (initialization): time 0.0006724/0.03106, allocations: 0.9991 MB / 1.219 GB, free: 10.37 MB / 1.167 GB
Notification: Performance of collectPreVariables (initialization): time 5.048e-05/0.03111, allocations: 45.7 kB / 1.219 GB, free: 10.32 MB / 1.167 GB
Notification: Performance of collectInitialEqns (initialization): time 0.0002818/0.03139, allocations: 0.6095 MB / 1.22 GB, free: 9.699 MB / 1.167 GB
Notification: Performance of collectInitialBindings (initialization): time 0.0001543/0.03154, allocations: 317.3 kB / 1.22 GB, free: 9.387 MB / 1.167 GB
Notification: Performance of simplifyInitialFunctions (initialization): time 0.0001904/0.03173, allocations: 194.8 kB / 1.22 GB, free: 9.191 MB / 1.167 GB
Notification: Performance of setup shared object (initialization): time 9.286e-05/0.03183, allocations: 349.9 kB / 1.221 GB, free: 8.844 MB / 1.167 GB
Notification: Performance of preBalanceInitialSystem (initialization): time 0.0001789/0.032, allocations: 138.6 kB / 1.221 GB, free: 8.695 MB / 1.167 GB
Notification: Performance of partitionIndependentBlocks (initialization): time 0.0003637/0.03237, allocations: 0.6623 MB / 1.221 GB, free: 7.844 MB / 1.167 GB
Notification: Performance of analyzeInitialSystem (initialization): time 0.0006104/0.03298, allocations: 0.6966 MB / 1.222 GB, free: 7.039 MB / 1.167 GB
Notification: Performance of solveInitialSystemEqSystem (initialization): time 5.71e-06/0.03298, allocations: 8 kB / 1.222 GB, free: 7.031 MB / 1.167 GB
Notification: Performance of matching and sorting (n=133) (initialization): time 0.0006314/0.03362, allocations: 0.638 MB / 1.223 GB, free: 6.379 MB / 1.167 GB
Notification: Performance of prepare postOptimizeDAE: time 3.337e-05/0.03365, allocations: 37.69 kB / 1.223 GB, free: 6.336 MB / 1.167 GB
Notification: Performance of postOpt simplifyComplexFunction (initialization): time 9.167e-06/0.03366, allocations: 8 kB / 1.223 GB, free: 6.328 MB / 1.167 GB
Notification: Performance of postOpt tearingSystem (initialization): time 1.349e-05/0.03367, allocations: 12 kB / 1.223 GB, free: 6.316 MB / 1.167 GB
Notification: Performance of postOpt solveSimpleEquations (initialization): time 0.001077/0.03475, allocations: 0.5264 MB / 1.223 GB, free: 5.793 MB / 1.167 GB
Notification: Performance of postOpt calculateStrongComponentJacobians (initialization): time 1.192e-05/0.03476, allocations: 27.88 kB / 1.223 GB, free: 5.766 MB / 1.167 GB
Notification: Performance of postOpt simplifyAllExpressions (initialization): time 0.0003583/0.03512, allocations: 135.1 kB / 1.223 GB, free: 5.633 MB / 1.167 GB
Notification: Performance of postOpt collapseArrayExpressions (initialization): time 4.499e-05/0.03516, allocations: 32 kB / 1.223 GB, free: 5.602 MB / 1.167 GB
Warning: Assuming fixed start value for the following 3 variables:
         consumer.heatExchanger1.h:VARIABLE(start = 252000.0 unit = \"J/kg\" fixed = true nominal = 252000.0 )  type: Real
         consumer_LowTemperatureDHN.heatPump.h:VARIABLE(start = 126000.0 unit = \"J/kg\" fixed = true )  type: Real
         consumerHeatCharacteristic.heatExchanger1.h:VARIABLE(start = 252000.0 unit = \"J/kg\" fixed = true nominal = 252000.0 )  type: Real
Notification: Performance of preBalanceInitialSystem (initialization_lambda0): time 0.0003384/0.0355, allocations: 242.1 kB / 1.224 GB, free: 5.352 MB / 1.167 GB
Notification: Performance of partitionIndependentBlocks (initialization_lambda0): time 0.0003692/0.03587, allocations: 0.6623 MB / 1.224 GB, free: 4.504 MB / 1.167 GB
Notification: Performance of analyzeInitialSystem (initialization_lambda0): time 0.0005766/0.03645, allocations: 0.6931 MB / 1.225 GB, free: 3.703 MB / 1.167 GB
Notification: Performance of solveInitialSystemEqSystem (initialization_lambda0): time 4.428e-06/0.03645, allocations: 4 kB / 1.225 GB, free: 3.699 MB / 1.167 GB
Notification: Performance of matching and sorting (n=133) (initialization_lambda0): time 0.0005973/0.03705, allocations: 0.6058 MB / 1.225 GB, free: 3.074 MB / 1.167 GB
Notification: Performance of prepare postOptimizeDAE: time 2.102e-05/0.03707, allocations: 45.64 kB / 1.226 GB, free: 3.023 MB / 1.167 GB
Notification: Performance of postOpt simplifyComplexFunction (initialization): time 5.981e-06/0.03708, allocations: 8 kB / 1.226 GB, free: 3.016 MB / 1.167 GB
Notification: Performance of postOpt tearingSystem (initialization): time 1.176e-05/0.03709, allocations: 15.94 kB / 1.226 GB, free: 3 MB / 1.167 GB
Notification: Performance of postOpt solveSimpleEquations (initialization): time 0.0009812/0.03807, allocations: 0.5051 MB / 1.226 GB, free: 2.5 MB / 1.167 GB
Notification: Performance of postOpt calculateStrongComponentJacobians (initialization): time 1.135e-05/0.03808, allocations: 19.92 kB / 1.226 GB, free: 2.48 MB / 1.167 GB
Notification: Performance of postOpt simplifyAllExpressions (initialization): time 0.0003437/0.03843, allocations: 111.3 kB / 1.226 GB, free: 2.371 MB / 1.167 GB
Notification: Performance of postOpt collapseArrayExpressions (initialization): time 4.042e-05/0.03847, allocations: 36 kB / 1.226 GB, free: 2.336 MB / 1.167 GB
Warning: Assuming fixed start value for the following 3 variables:
         consumer.heatExchanger1.h:VARIABLE(start = 252000.0 unit = \"J/kg\" fixed = true nominal = 252000.0 )  type: Real
         consumer_LowTemperatureDHN.heatPump.h:VARIABLE(start = 126000.0 unit = \"J/kg\" fixed = true )  type: Real
         consumerHeatCharacteristic.heatExchanger1.h:VARIABLE(start = 252000.0 unit = \"J/kg\" fixed = true nominal = 252000.0 )  type: Real
Notification: Model statistics after passing the back-end for initialization:
 * Number of independent subsystems: 33
 * Number of states: 0 ()
 * Number of discrete variables: 10 ($PRE.consumer_SLP.combiTimeTable.nextTimeEvent,$whenCondition1,consumer_SLP.combiTimeTable.nextTimeEventScaled,$PRE.consumer_SLP.combiTimeTable.nextTimeEventScaled,consumer_SLP.combiTimeTable.nextTimeEvent,$PRE.consumer.trapezoid.count,$PRE.consumer.trapezoid.T_start,consumer.trapezoid.count,consumer.trapezoid.T_start,$whenCondition2)
 * Number of discrete states: 0 ()
 * Number of clocked states: 0 ()
 * Top-level inputs: 0
Notification: Strong component statistics for initialization (132):
 * Single equations (assignments): 131
 * Array equations: 0
 * Algorithm blocks: 1
 * Record equations: 0
 * When equations: 0
 * If-equations: 0
 * Equation systems (not torn): 0
 * Torn equation systems: 0
 * Mixed (continuous/discrete) equation systems: 0
Notification: Performance of prepare postOptimizeDAE: time 0.0001678/0.03863, allocations: 263 kB / 1.226 GB, free: 2.074 MB / 1.167 GB
Notification: Performance of postOpt lateInlineFunction (simulation): time 0.0001092/0.03874, allocations: 111.9 kB / 1.227 GB, free: 1.965 MB / 1.167 GB
Notification: Performance of postOpt wrapFunctionCalls (simulation): time 0.0003816/0.03912, allocations: 327.6 kB / 1.227 GB, free: 1.633 MB / 1.167 GB
Notification: Performance of postOpt inlineArrayEqn (simulation): time 6.893e-06/0.03913, allocations: 12 kB / 1.227 GB, free: 1.621 MB / 1.167 GB
Notification: Performance of postOpt constantLinearSystem (simulation): time 5.35e-06/0.03914, allocations: 4 kB / 1.227 GB, free: 1.617 MB / 1.167 GB
Notification: Performance of postOpt simplifysemiLinear (simulation): time 7.544e-06/0.03914, allocations: 3.984 kB / 1.227 GB, free: 1.613 MB / 1.167 GB
Notification: Performance of postOpt removeSimpleEquations (simulation): time 0.0009656/0.04011, allocations: 1.002 MB / 1.228 GB, free: 0.5664 MB / 1.167 GB
Notification: Performance of postOpt simplifyComplexFunction (simulation): time 2.825e-06/0.04011, allocations: 4 kB / 1.228 GB, free: 0.5625 MB / 1.167 GB
Notification: Performance of postOpt solveSimpleEquations (simulation): time 0.0007307/0.04084, allocations: 335.5 kB / 1.228 GB, free: 244 kB / 1.167 GB
Notification: Performance of postOpt removeConstants (simulation): time 0.000237/0.04108, allocations: 150.8 kB / 1.228 GB, free: 92 kB / 1.167 GB
Notification: Performance of postOpt tearingSystem (simulation): time 4.709e-06/0.04108, allocations: 4 kB / 1.228 GB, free: 88 kB / 1.167 GB
Notification: Performance of postOpt inputDerivativesUsed (simulation): time 3.271e-05/0.04112, allocations: 20 kB / 1.228 GB, free: 68 kB / 1.167 GB
Notification: Performance of postOpt calculateStrongComponentJacobians (simulation): time 6.082e-06/0.04112, allocations: 11.92 kB / 1.228 GB, free: 56 kB / 1.167 GB
Notification: Performance of postOpt calculateStateSetsJacobians (simulation): time 1.613e-06/0.04113, allocations: 3.938 kB / 1.228 GB, free: 52 kB / 1.167 GB
Notification: Performance of postOpt symbolicJacobian (simulation): time 0.000693/0.04182, allocations: 0.6546 MB / 1.229 GB, free: 15.37 MB / 1.183 GB
Notification: Performance of postOpt simplifyTimeIndepFuncCalls (simulation): time 8.622e-05/0.0419, allocations: 24 kB / 1.229 GB, free: 15.34 MB / 1.183 GB
Notification: Performance of postOpt simplifyAllExpressions (simulation): time 0.0002766/0.04218, allocations: 47.91 kB / 1.229 GB, free: 15.3 MB / 1.183 GB
Notification: Performance of postOpt findZeroCrossings (simulation): time 9.138e-05/0.04227, allocations: 67.86 kB / 1.229 GB, free: 15.23 MB / 1.183 GB
Notification: Performance of postOpt collapseArrayExpressions (simulation): time 3.347e-05/0.04231, allocations: 16 kB / 1.229 GB, free: 15.21 MB / 1.183 GB
Notification: Performance of sorting global known variables: time 0.0003764/0.04268, allocations: 0.4958 MB / 1.23 GB, free: 14.71 MB / 1.183 GB
Notification: Performance of sort global known variables: time 6e-08/0.04268, allocations: 0 / 1.23 GB, free: 14.71 MB / 1.183 GB
Notification: Performance of remove unused functions: time 0.0008274/0.04351, allocations: 0.6739 MB / 1.23 GB, free: 14.04 MB / 1.183 GB
Notification: Model statistics after passing the back-end for simulation:
 * Number of independent subsystems: 5
 * Number of states: 7 (consumerHeatCharacteristic.heatCapacitor1.T,consumerHeatCharacteristic.heatExchanger1.h,consumer_LowTemperatureDHN.heatCapacitor1.T,consumer_LowTemperatureDHN.heatPump.h,consumer_SLP.heatExchanger.h,consumer.heatCapacitor1.T,consumer.heatExchanger1.h)
 * Number of discrete variables: 6 ($whenCondition1,consumer_SLP.combiTimeTable.nextTimeEvent,consumer_SLP.combiTimeTable.nextTimeEventScaled,$whenCondition2,consumer.trapezoid.T_start,consumer.trapezoid.count)
 * Number of discrete states: 3 (consumer.trapezoid.count,consumer_SLP.combiTimeTable.nextTimeEvent,consumer_SLP.combiTimeTable.nextTimeEventScaled)
 * Number of clocked states: 0 ()
 * Top-level inputs: 0
Notification: Strong component statistics for simulation (85):
 * Single equations (assignments): 81
 * Array equations: 0
 * Algorithm blocks: 0
 * Record equations: 0
 * When equations: 4
 * If-equations: 0
 * Equation systems (not torn): 0
 * Torn equation systems: 0
 * Mixed (continuous/discrete) equation systems: 0
Notification: Performance of Backend phase and start with SimCode phase: time 0.002329/0.04584, allocations: 1.841 MB / 1.232 GB, free: 12.53 MB / 1.183 GB
Notification: Performance of simCode: created initialization part: time 0.0008298/0.04667, allocations: 0.8733 MB / 1.233 GB, free: 11.61 MB / 1.183 GB
Notification: Performance of simCode: created event and clocks part: time 1.625e-05/0.04669, allocations: 16.5 kB / 1.233 GB, free: 11.6 MB / 1.183 GB
Notification: Performance of simCode: created simulation system equations: time 0.0002177/0.0469, allocations: 208.3 kB / 1.233 GB, free: 11.39 MB / 1.183 GB
Notification: Performance of simCode: created of all other equations (e.g. parameter, nominal, assert, etc): time 0.0007498/0.04765, allocations: 429.3 kB / 1.234 GB, free: 10.98 MB / 1.183 GB
Notification: Performance of simCode: created linear, non-linear and system jacobian parts: time 0.006533/0.05419, allocations: 6.646 MB / 1.24 GB, free: 4.109 MB / 1.183 GB
Notification: Performance of simCode: some other stuff during SimCode phase: time 0.0001806/0.05437, allocations: 261.2 kB / 1.24 GB, free: 3.828 MB / 1.183 GB
Notification: Performance of simCode: alias equations: time 0.0004955/0.05486, allocations: 168.8 kB / 1.24 GB, free: 3.66 MB / 1.183 GB
Notification: Performance of simCode: all other stuff during SimCode phase: time 0.000975/0.05584, allocations: 0.9187 MB / 1.241 GB, free: 2.742 MB / 1.183 GB
Notification: Performance of SimCode: time 6.41e-07/0.05584, allocations: 4 kB / 1.241 GB, free: 2.738 MB / 1.183 GB
Notification: Performance of FMU documentation: time 0.05978/0.1156, allocations: 46.11 MB / 1.286 GB, free: 4.359 MB / 1.229 GB
Notification: FMU-only work: backend 0.0007324, simCode 0.002978, templates 0
Notification: Performance of buildModelFMU: Generate the FMI files: time 0.06175/0.1774, allocations: 1.404 MB / 1.288 GB, free: 2.879 MB / 1.229 GB
Notification: Building FMU for platform 'static' (1/1).
Notification: Finished FMU for platform 'static' (1/1).
Notification: Performance of buildModelFMU: Generate platform static: time 3.3/3.477, allocations: 23.72 kB / 1.288 GB, free: 2.863 MB / 1.229 GB
"
[Timeout remaining time 656]
(rm -f TransiEnt_TransiEnt.Consumer.Heat.Check.TestConsumer.pipe ; mkfifo TransiEnt_TransiEnt.Consumer.Heat.Check.TestConsumer.pipe ; head -c 1048576 < TransiEnt_TransiEnt.Consumer.Heat.Check.TestConsumer.pipe >> ../files/TransiEnt_TransiEnt.Consumer.Heat.Check.TestConsumer.sim & (cd run_OMSimulator && /home/hudson/saved_omc/OMSimulator/install/bin/OMSimulator  --stripRoot --tempDir=temp_TransiEnt_TransiEnt_Consumer_Heat_Check_TestConsumer_fmu --startTime=0 --stopTime=6.048e+06 --stepSize=2419.2 --mode=me --timeout=240 --tolerance=1e-06 ../TransiEnt_TransiEnt_Consumer_Heat_Check_TestConsumer.fmu) > TransiEnt_TransiEnt.Consumer.Heat.Check.TestConsumer.pipe 2>&1) [Timeout 252.0]
OMSimulator failed or timed out simulating it; the others still get to run it
(rm -f TransiEnt_TransiEnt.Consumer.Heat.Check.TestConsumer_OMSimulator-cs-cvode.pipe ; mkfifo TransiEnt_TransiEnt.Consumer.Heat.Check.TestConsumer_OMSimulator-cs-cvode.pipe ; head -c 1048576 < TransiEnt_TransiEnt.Consumer.Heat.Check.TestConsumer_OMSimulator-cs-cvode.pipe >> /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/files/TransiEnt_TransiEnt.Consumer.Heat.Check.TestConsumer_OMSimulator-cs-cvode.sim & (cd run_OMSimulator-cs-cvode && /home/hudson/saved_omc/OMSimulator/install/bin/OMSimulator  --stripRoot --tempDir=temp_TransiEnt_TransiEnt_Consumer_Heat_Check_TestConsumer_OMSimulator-cs-cvode_fmu --startTime=0 --stopTime=6.048e+06 --stepSize=2419.2 --mode=cs --timeout=240 --tolerance=1e-06 ../TransiEnt_TransiEnt_Consumer_Heat_Check_TestConsumer_OMSimulator-cs-cvode.fmu) > TransiEnt_TransiEnt.Consumer.Heat.Check.TestConsumer_OMSimulator-cs-cvode.pipe 2>&1) [Timeout 252.0]
(rm -f TransiEnt_TransiEnt.Consumer.Heat.Check.TestConsumer_OMSimulator-cs-euler.pipe ; mkfifo TransiEnt_TransiEnt.Consumer.Heat.Check.TestConsumer_OMSimulator-cs-euler.pipe ; head -c 1048576 < TransiEnt_TransiEnt.Consumer.Heat.Check.TestConsumer_OMSimulator-cs-euler.pipe >> /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/files/TransiEnt_TransiEnt.Consumer.Heat.Check.TestConsumer_OMSimulator-cs-euler.sim & (cd run_OMSimulator-cs-euler && /home/hudson/saved_omc/OMSimulator/install/bin/OMSimulator  --stripRoot --tempDir=temp_TransiEnt_TransiEnt_Consumer_Heat_Check_TestConsumer_OMSimulator-cs-euler_fmu --startTime=0 --stopTime=6.048e+06 --stepSize=2419.2 --mode=cs --timeout=240 --tolerance=1e-06 ../TransiEnt_TransiEnt_Consumer_Heat_Check_TestConsumer_OMSimulator-cs-euler.fmu) > TransiEnt_TransiEnt.Consumer.Heat.Check.TestConsumer_OMSimulator-cs-euler.pipe 2>&1) [Timeout 252.0]
OMSimulator-cs-euler timed out simulating the FMU
(rm -f TransiEnt_TransiEnt.Consumer.Heat.Check.TestConsumer_fmpy.pipe ; mkfifo TransiEnt_TransiEnt.Consumer.Heat.Check.TestConsumer_fmpy.pipe ; head -c 1048576 < TransiEnt_TransiEnt.Consumer.Heat.Check.TestConsumer_fmpy.pipe >> /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/files/TransiEnt_TransiEnt.Consumer.Heat.Check.TestConsumer_fmpy.sim & (cd run_fmpy && python3 -m fmpy simulate --output-file ../TransiEnt_TransiEnt.Consumer.Heat.Check.TestConsumer_fmpy_res.csv --start-time 0 --stop-time 6.048e+06 --timeout 240 --relative-tolerance 1e-06 --interface-type ModelExchange --solver CVode --output-interval 2419.2 ../TransiEnt_TransiEnt_Consumer_Heat_Check_TestConsumer.fmu) > TransiEnt_TransiEnt.Consumer.Heat.Check.TestConsumer_fmpy.pipe 2>&1) [Timeout 252.0]
fmpy timed out simulating the FMU
(rm -f TransiEnt_TransiEnt.Consumer.Heat.Check.TestConsumer_fmpy-fmi3-cs-cvode.pipe ; mkfifo TransiEnt_TransiEnt.Consumer.Heat.Check.TestConsumer_fmpy-fmi3-cs-cvode.pipe ; head -c 1048576 < TransiEnt_TransiEnt.Consumer.Heat.Check.TestConsumer_fmpy-fmi3-cs-cvode.pipe >> /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/files/TransiEnt_TransiEnt.Consumer.Heat.Check.TestConsumer_fmpy-fmi3-cs-cvode.sim & (cd run_fmpy-fmi3-cs-cvode && python3 -m fmpy simulate --output-file ../TransiEnt_TransiEnt.Consumer.Heat.Check.TestConsumer_fmpy-fmi3-cs-cvode_res.csv --start-time 0 --stop-time 6.048e+06 --timeout 240 --relative-tolerance 1e-06 --interface-type CoSimulation --output-interval 2419.2 ../TransiEnt_TransiEnt_Consumer_Heat_Check_TestConsumer_fmpy-fmi3-cs-cvode.fmu) > TransiEnt_TransiEnt.Consumer.Heat.Check.TestConsumer_fmpy-fmi3-cs-cvode.pipe 2>&1) [Timeout 252.0]
[Calling sys.exit(0), Time elapsed: 11.164312337525189]