Running: ./testmodel.py --libraries=/home/hudson/saved_omc/libraries/.openmodelica/libraries --ompython_omhome=/usr TransiEnt_TransiEnt.Basics.Blocks.Check.CompareSlewRateLimiters.conf.json
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/DymolaCommands master/package.mo", uses=false) [Timeout 180]
"Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/DymolaCommands master/package.mo): time 0.0003493/0.0003493, allocations: 24.42 kB / 9.863 MB, free: 0.8359 MB / 10.45 MB
Notification: Performance of NFInstanceAPI.mkTop(<interactive>): time 0.0008557/0.001205, allocations: 421.9 kB / 10.28 MB, free: 436 kB / 10.45 MB
"
[Timeout remaining time 180]
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/package.mo", uses=false) [Timeout 180]
"[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Control/PredictorModels_3508/Check/package.mo:2:1-21:10:writable] Warning: The package.order file contains a class TestReheater, which is expected to be stored in file TestReheater.mo, but seems to be named testReheater.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Control/PredictorModels_3508/Check/testReheater.mo:2:1-117:17:writable] Warning: Expected the package to have name testReheater, but got TestReheater. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/package.mo:2:1-23:10:writable] Warning: PhysicalMills was referenced in the package.order file, but was not found in package.mo, PhysicalMills/package.mo or PhysicalMills.mo.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/package.mo:2:1-22:18:writable] Warning: Expected the package to have name physicalMills, but got PhysicalMills. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/package.mo:2:1-22:18:writable] Warning: The package.order file contains a class Mill_L4_advancedInit, which is expected to be stored in file Mill_L4_advancedInit.mo, but seems to be named mill_L4_advancedInit.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/package.mo:2:1-22:18:writable] Warning: The package.order file contains a class Mill_L4, which is expected to be stored in file Mill_L4.mo, but seems to be named mill_L4.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/mill_L4_advancedInit.mo:2:1-58:25:writable] Warning: Expected the package to have name mill_L4_advancedInit, but got Mill_L4_advancedInit. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/mill_L4_advancedInit.mo:2:1-58:25:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills; but got within ClaRa.Components.Mills.PhysicalMills; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/mill_L4.mo:2:1-315:12:writable] Warning: Expected the package to have name mill_L4, but got Mill_L4. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/mill_L4.mo:2:1-315:12:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills; but got within ClaRa.Components.Mills.PhysicalMills; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/package.mo:2:1-21:10:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills; but got within ClaRa.Components.Mills.PhysicalMills; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/package.mo:2:1-21:10:writable] Warning: The package.order file contains a class TestMillBox_2, which is expected to be stored in file TestMillBox_2.mo, but seems to be named testMillBox_2.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/package.mo:2:1-21:10:writable] Warning: The package.order file contains a class TestMillBox_1_measurementInput, which is expected to be stored in file TestMillBox_1_measurementInput.mo, but seems to be named testMillBox_1_measurementInput.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/package.mo:2:1-21:10:writable] Warning: The package.order file contains a class TestMillBox_1, which is expected to be stored in file TestMillBox_1.mo, but seems to be named testMillBox_1.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/testMillBox_2.mo:2:1-297:18:writable] Warning: Expected the package to have name testMillBox_2, but got TestMillBox_2. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/testMillBox_2.mo:2:1-297:18:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Check; but got within ClaRa.Components.Mills.PhysicalMills.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/testMillBox_1_measurementInput.mo:2:1-1342:35:writable] Warning: Expected the package to have name testMillBox_1_measurementInput, but got TestMillBox_1_measurementInput. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/testMillBox_1_measurementInput.mo:2:1-1342:35:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Check; but got within ClaRa.Components.Mills.PhysicalMills.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/testMillBox_1.mo:2:1-465:18:writable] Warning: Expected the package to have name testMillBox_1, but got TestMillBox_1. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Check/testMillBox_1.mo:2:1-465:18:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Check; but got within ClaRa.Components.Mills.PhysicalMills.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/package.mo:2:1-29:12:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills; but got within ClaRa.Components.Mills.PhysicalMills; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/FlowClassifier.mo:2:1-346:19:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/CentrifugalClassifier.mo:2:1-380:26:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/GrinderRingRoller.mo:2:1-294:22:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/FuelJoin_distributed.mo:2:1-133:25:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Dryer.mo:2:1-301:10:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/package.mo:2:1-20:17:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/package.mo:2:1-20:13:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Transport_Velocity/package.mo:2:1-20:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Transport_Velocity/Transport_complex.mo:2:1-71:22:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Transport_Velocity/Transport_constant.mo:2:1-49:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Transport_Velocity/Transport_base.mo:2:1-52:19:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Transport_Velocity; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Selection_Function/package.mo:2:1-20:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Selection_Function/Selection_Kersting.mo:2:1-80:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Selection_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Selection_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Selection_Function/Selection_Steinmetz.mo:2:1-104:24:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Selection_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Selection_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Selection_Function/Selection_constant.mo:2:1-45:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Selection_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Selection_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Selection_Function/Selection_base.mo:2:1-50:19:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Selection_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Selection_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Breakage_Function/package.mo:2:1-20:22:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Breakage_Function/Breakage_Austin.mo:2:1-109:20:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Breakage_Function/Breakage_Steinmetz.mo:2:1-106:23:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Breakage_Function/Breakage_constant.mo:2:1-45:22:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Grinding/Breakage_Function/Breakage_base.mo:2:1-51:18:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Grinding.Breakage_Function; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Drying/package.mo:2:1-20:11:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Drying/Drying_ideal.mo:2:1-58:17:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Drying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Drying; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Drying/Drying_base.mo:2:1-44:16:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Drying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Drying; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Classifying/package.mo:2:1-20:16:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Classifying/Classifying_flow.mo:2:1-111:21:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Classifying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Classifying; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Classifying/Classifying_centrifugal.mo:2:1-153:28:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Classifying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Classifying; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Classifying/Classifying_centrifugal_base.mo:2:1-45:33:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Classifying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Classifying; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Classifying/Classifying_flow_base.mo:2:1-45:26:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Classifying; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Classifying; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/package.mo:2:1-20:12:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/iCom_Dryer.mo:2:1-57:15:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/iCom_FlowClassifier.mo:2:1-67:24:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/iCom_CentrifugalClassifier.mo:2:1-69:31:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/iCom_Grinder.mo:2:1-61:17:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/FuelClassification_example_21classes.mo:2:1-43:41:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/GeometricProgression.mo:2:1-56:25:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/FuelClassification_generic.mo:2:1-43:31:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/FuelClassification_example_05classes.mo:2:1-43:41:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/FuelClassification_example_11classes.mo:2:1-43:41:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Fundamentals/Records/FuelClassification_base.mo:2:1-61:28:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Fundamentals.Records; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Fundamentals.Records; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/package.mo:2:1-23:10:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes; but got within ClaRa.Components.Mills.PhysicalMills.Volumes; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/package.mo:2:1-23:10:writable] Warning: The package.order file contains a class TestFuelJoin, which is expected to be stored in file TestFuelJoin.mo, but seems to be named testFuelJoin.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/package.mo:2:1-23:10:writable] Warning: The package.order file contains a class TestAerosolVolume, which is expected to be stored in file TestAerosolVolume.mo, but seems to be named testAerosolVolume.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/package.mo:2:1-23:10:writable] Warning: The package.order file contains a class TestDryer, which is expected to be stored in file TestDryer.mo, but seems to be named testDryer.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/package.mo:2:1-23:10:writable] Warning: The package.order file contains a class TestGrinder, which is expected to be stored in file TestGrinder.mo, but seems to be named testGrinder.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testFuelJoin.mo:2:1-93:17:writable] Warning: Expected the package to have name testFuelJoin, but got TestFuelJoin. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testFuelJoin.mo:2:1-93:17:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Check; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testAerosolVolume.mo:2:1-176:22:writable] Warning: Expected the package to have name testAerosolVolume, but got TestAerosolVolume. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testAerosolVolume.mo:2:1-176:22:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Check; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testDryer.mo:2:1-93:14:writable] Warning: Expected the package to have name testDryer, but got TestDryer. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testDryer.mo:2:1-93:14:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Check; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testGrinder.mo:2:1-154:16:writable] Warning: Expected the package to have name testGrinder, but got TestGrinder. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/Components/Mills/physicalMills/Volumes/Check/testGrinder.mo:2:1-154:16:writable] Warning: Expected the package to have within ClaRa.Components.Mills.physicalMills.Volumes.Check; but got within ClaRa.Components.Mills.PhysicalMills.Volumes.Check; (ignoring the potential error; the class might have been inserted at an unexpected location).
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/package.mo): time 0.5474/0.5474, allocations: 100.7 MB / 111.7 MB, free: 15.09 MB / 122.8 MB
Notification: Performance of NFInstanceAPI.mkTop(<interactive>): time 0.06723/0.6146, allocations: 28.09 MB / 139.8 MB, free: 6.258 MB / 138.8 MB
"
[Timeout remaining time 179]
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-ClaRa/package.mo", uses=false) [Timeout 180]
"Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-ClaRa/package.mo): time 0.05974/0.05974, allocations: 16.04 MB / 156.7 MB, free: 5.797 MB / 154.8 MB
Notification: Performance of NFInstanceAPI.mkTop(<interactive>): time 0.008432/0.06817, allocations: 6.787 MB / 163.5 MB, free: 14.99 MB / 170.8 MB
"
[Timeout remaining time 180]
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.1.0+maint.om/package.mo", uses=false) [Timeout 180]
"Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.1.0+maint.om/package.mo): time 0.000559/0.000559, allocations: 67.12 kB / 164.3 MB, free: 14.18 MB / 170.8 MB
Notification: Performance of NFInstanceAPI.mkTop(<interactive>): time 0.0009311/0.00149, allocations: 460.7 kB / 164.8 MB, free: 13.73 MB / 170.8 MB
"
[Timeout remaining time 180]
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.1.0+maint.om/package.mo", uses=false) [Timeout 180]
"Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.1.0+maint.om/package.mo): time 0.0007103/0.0007103, allocations: 157.3 kB / 165.6 MB, free: 12.85 MB / 170.8 MB
Notification: Performance of NFInstanceAPI.mkTop(<interactive>): time 0.0009407/0.001651, allocations: 483.5 kB / 166.1 MB, free: 12.38 MB / 170.8 MB
"
[Timeout remaining time 180]
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.1.0+maint.om/package.mo", uses=false) [Timeout 180]
"Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.1.0+maint.om/package.mo): time 0.9169/0.9169, allocations: 177.1 MB / 344 MB, free: 6.117 MB / 330.8 MB
Notification: Performance of NFInstanceAPI.mkTop(<interactive>): time 0.07842/0.9953, allocations: 53.68 MB / 397.7 MB, free: 344 kB / 378.8 MB
"
[Timeout remaining time 179]
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.2/package.mo", uses=false) [Timeout 180]
"Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.2/package.mo): time 1.902/1.902, allocations: 376.9 MB / 0.7571 GB, free: 10.32 MB / 0.7293 GB
Notification: Performance of NFInstanceAPI.mkTop(<interactive>): time 0.1782/2.08, allocations: 123.2 MB / 0.8775 GB, free: 15.11 MB / 0.8543 GB
"
[Timeout remaining time 178]
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.3-master/package.mo", uses=false) [Timeout 180]
"[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.3-master/Basics/Interfaces/Thermal/package.mo:2:1-91:12:writable] Warning: The package.order file contains a class FluidPortOut_simple, which is expected to be stored in file FluidPortOut_simple.mo, but seems to be named fluidPortOut_simple.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.3-master/Basics/Interfaces/Thermal/package.mo:2:1-91:12:writable] Warning: The package.order file contains a class FluidPortIn_simple, which is expected to be stored in file FluidPortIn_simple.mo, but seems to be named fluidPortIn_simple.mo. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.3-master/Basics/Interfaces/Thermal/fluidPortOut_simple.mo:2:1-49:24:writable] Warning: Expected the package to have name fluidPortOut_simple, but got FluidPortOut_simple. Proceeding since only the case of the names are different.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.3-master/Basics/Interfaces/Thermal/fluidPortIn_simple.mo:2:1-50:23:writable] Warning: Expected the package to have name fluidPortIn_simple, but got FluidPortIn_simple. Proceeding since only the case of the names are different.
Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.3-master/package.mo): time 1.638/1.638, allocations: 241.5 MB / 1.114 GB, free: 3.172 MB / 1.058 GB
Notification: Performance of NFInstanceAPI.mkTop(<interactive>): time 0.09448/1.732, allocations: 70.61 MB / 1.183 GB, free: 4 kB / 1.12 GB
"
[Timeout remaining time 178]
Using package TransiEnt with version 2.0.3 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/TransiEnt 2.0.3-master/package.mo)
Using package Buildings with version 12.1.2 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.2/package.mo)
Using package Modelica with version 4.1.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 4.1.0+maint.om/package.mo)
Using package Complex with version 4.1.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.1.0+maint.om/package.mo)
Using package ModelicaServices with version 4.1.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.1.0+maint.om/package.mo)
Using package TILMedia with version 1.8.1 ClaRa (/home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.8.1-ClaRa/package.mo)
Using package ClaRa with version 1.8.1 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.8.1/package.mo)
Using package DymolaCommands with version 0.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/DymolaCommands master/package.mo)
Running command: setCommandLineOptions("--fmiFlags=s:cvode")
Running command: "" <> buildModelFMU(TransiEnt.Basics.Blocks.Check.CompareSlewRateLimiters,fileNamePrefix="TransiEnt_TransiEnt_Basics_Blocks_Check_CompareSlewRateLimiters",fmuType="me_cs",version="2.0+3.0",platforms={"static"})
"" <> buildModelFMU(TransiEnt.Basics.Blocks.Check.CompareSlewRateLimiters,fileNamePrefix="TransiEnt_TransiEnt_Basics_Blocks_Check_CompareSlewRateLimiters",fmuType="me_cs",version="2.0+3.0",platforms={"static"}) [Timeout 660]
"Notification: Performance of FrontEnd - loaded program: time 1.303e-06/1.303e-06, allocations: 3.938 kB / 1.185 GB, free: 14.32 MB / 1.136 GB
Notification: Performance of FrontEnd - Absyn->SCode: time 1.068e-05/1.198e-05, allocations: 5.406 kB / 1.185 GB, free: 14.31 MB / 1.136 GB
Notification: Performance of NFInst.instantiate(TransiEnt.Basics.Blocks.Check.CompareSlewRateLimiters): time 0.002283/0.002295, allocations: 2.933 MB / 1.188 GB, free: 11.37 MB / 1.136 GB
Notification: Performance of NFInst.instExpressions: time 0.001025/0.00332, allocations: 0.9226 MB / 1.188 GB, free: 10.44 MB / 1.136 GB
Notification: Performance of NFInst.updateImplicitVariability: time 5.802e-05/0.003378, allocations: 0 / 1.188 GB, free: 10.44 MB / 1.136 GB
Notification: Performance of NFTyping.typeComponents: time 0.0001192/0.003497, allocations: 91.67 kB / 1.188 GB, free: 10.35 MB / 1.136 GB
Notification: Performance of NFTyping.typeBindings: time 8.095e-05/0.003578, allocations: 95.61 kB / 1.189 GB, free: 10.26 MB / 1.136 GB
Notification: Performance of NFTyping.typeClassSections: time 0.0003666/0.003945, allocations: 215.2 kB / 1.189 GB, free: 10.05 MB / 1.136 GB
Notification: Performance of NFFlatten.flatten: time 0.0001805/0.004125, allocations: 199.4 kB / 1.189 GB, free: 9.852 MB / 1.136 GB
Notification: Performance of NFFlatten.resolveConnections: time 7.24e-05/0.004198, allocations: 21.94 kB / 1.189 GB, free: 9.828 MB / 1.136 GB
Notification: Performance of NFEvalConstants.evaluate: time 0.0001248/0.004322, allocations: 123.8 kB / 1.189 GB, free: 9.707 MB / 1.136 GB
Notification: Performance of NFSimplifyModel.simplify: time 0.0001329/0.004455, allocations: 111.8 kB / 1.189 GB, free: 9.598 MB / 1.136 GB
Notification: Performance of NFPackage.collectConstants: time 1.965e-05/0.004475, allocations: 12 kB / 1.189 GB, free: 9.586 MB / 1.136 GB
Notification: Performance of NFFlatten.collectFunctions: time 0.0001167/0.004592, allocations: 91.86 kB / 1.189 GB, free: 9.496 MB / 1.136 GB
Notification: Performance of NFScalarize.scalarize: time 4.144e-05/0.004633, allocations: 35.88 kB / 1.189 GB, free: 9.461 MB / 1.136 GB
Notification: Performance of NFVerifyModel.verify: time 5.04e-05/0.004683, allocations: 43.84 kB / 1.189 GB, free: 9.418 MB / 1.136 GB
Notification: Performance of NFConvertDAE.convert: time 0.0001815/0.004865, allocations: 175.4 kB / 1.19 GB, free: 9.246 MB / 1.136 GB
Notification: Performance of FrontEnd - DAE generated: time 9.318e-06/0.004874, allocations: 0 / 1.19 GB, free: 9.246 MB / 1.136 GB
Notification: Performance of FrontEnd: time 4.21e-07/0.004875, allocations: 0 / 1.19 GB, free: 9.246 MB / 1.136 GB
Notification: Performance of Transformations before backend: time 9.107e-06/0.004884, allocations: 0 / 1.19 GB, free: 9.246 MB / 1.136 GB
Notification: Model statistics after passing the front-end and creating the data structures used by the back-end:
 * Number of equations: 22
 * Number of variables: 22
Notification: Performance of Generate backend data structure: time 0.0004559/0.00534, allocations: 462.8 kB / 1.19 GB, free: 8.758 MB / 1.136 GB
Notification: Performance of prepare preOptimizeDAE: time 2.284e-05/0.005363, allocations: 12.73 kB / 1.19 GB, free: 8.746 MB / 1.136 GB
Notification: Performance of preOpt introduceOutputAliases (simulation): time 2.529e-05/0.005388, allocations: 46.72 kB / 1.19 GB, free: 8.691 MB / 1.136 GB
Notification: Performance of preOpt normalInlineFunction (simulation): time 3.426e-05/0.005422, allocations: 28.91 kB / 1.19 GB, free: 8.664 MB / 1.136 GB
Notification: Performance of preOpt evaluateParameters (simulation): time 0.0001473/0.005569, allocations: 180.8 kB / 1.19 GB, free: 8.461 MB / 1.136 GB
Notification: Performance of preOpt simplifyIfEquations (simulation): time 1.083e-05/0.00558, allocations: 4.375 kB / 1.19 GB, free: 8.457 MB / 1.136 GB
Notification: Performance of preOpt expandDerOperator (simulation): time 2.033e-05/0.005601, allocations: 12.38 kB / 1.19 GB, free: 8.445 MB / 1.136 GB
Notification: Performance of preOpt clockPartitioning (simulation): time 0.0001808/0.005781, allocations: 229.7 kB / 1.191 GB, free: 8.188 MB / 1.136 GB
Notification: Performance of preOpt findStateOrder (simulation): time 6.472e-06/0.005788, allocations: 0 / 1.191 GB, free: 8.188 MB / 1.136 GB
Notification: Performance of preOpt replaceEdgeChange (simulation): time 9.428e-06/0.005797, allocations: 4 kB / 1.191 GB, free: 8.184 MB / 1.136 GB
Notification: Performance of preOpt inlineArrayEqn (simulation): time 3.477e-06/0.005801, allocations: 4 kB / 1.191 GB, free: 8.18 MB / 1.136 GB
Notification: Performance of preOpt removeEqualRHS (simulation): time 6.821e-05/0.005869, allocations: 94.2 kB / 1.191 GB, free: 8.074 MB / 1.136 GB
Notification: Performance of preOpt removeSimpleEquations (simulation): time 0.0003193/0.006188, allocations: 274.2 kB / 1.191 GB, free: 7.777 MB / 1.136 GB
Notification: Performance of preOpt comSubExp (simulation): time 0.0001657/0.006354, allocations: 169.8 kB / 1.191 GB, free: 7.59 MB / 1.136 GB
Notification: Performance of preOpt resolveLoops (simulation): time 5.2e-05/0.006406, allocations: 92.25 kB / 1.191 GB, free: 7.484 MB / 1.136 GB
Notification: Performance of preOpt evalFunc (simulation): time 1.826e-05/0.006424, allocations: 7.938 kB / 1.191 GB, free: 7.477 MB / 1.136 GB
Notification: Performance of preOpt encapsulateWhenConditions (simulation): time 0.0001593/0.006584, allocations: 258.6 kB / 1.191 GB, free: 7.18 MB / 1.136 GB
Notification: Performance of pre-optimization done (n=19): time 1.273e-06/0.006585, allocations: 0 / 1.191 GB, free: 7.18 MB / 1.136 GB
Notification: Performance of matching and sorting (n=19): time 0.0002517/0.006836, allocations: 367.8 kB / 1.192 GB, free: 6.777 MB / 1.136 GB
Notification: Performance of inlineWhenForInitialization (initialization): time 6.026e-05/0.006897, allocations: 195.9 kB / 1.192 GB, free: 6.543 MB / 1.136 GB
Notification: Performance of selectInitializationVariablesDAE (initialization): time 9.365e-05/0.00699, allocations: 209 kB / 1.192 GB, free: 6.328 MB / 1.136 GB
Notification: Performance of collectPreVariables (initialization): time 1.617e-05/0.007007, allocations: 41.62 kB / 1.192 GB, free: 6.281 MB / 1.136 GB
Notification: Performance of collectInitialEqns (initialization): time 3.2e-05/0.007039, allocations: 104.5 kB / 1.192 GB, free: 6.176 MB / 1.136 GB
Notification: Performance of collectInitialBindings (initialization): time 3.485e-05/0.007073, allocations: 55.55 kB / 1.192 GB, free: 6.121 MB / 1.136 GB
Notification: Performance of simplifyInitialFunctions (initialization): time 4.109e-05/0.007114, allocations: 37.69 kB / 1.192 GB, free: 6.078 MB / 1.136 GB
Notification: Performance of setup shared object (initialization): time 6.959e-05/0.007184, allocations: 338.8 kB / 1.193 GB, free: 5.738 MB / 1.136 GB
Notification: Performance of preBalanceInitialSystem (initialization): time 4.749e-05/0.007232, allocations: 87.08 kB / 1.193 GB, free: 5.637 MB / 1.136 GB
Notification: Performance of partitionIndependentBlocks (initialization): time 7.271e-05/0.007304, allocations: 169.2 kB / 1.193 GB, free: 5.43 MB / 1.136 GB
Notification: Performance of analyzeInitialSystem (initialization): time 0.0001353/0.00744, allocations: 251.5 kB / 1.193 GB, free: 5.137 MB / 1.136 GB
Notification: Performance of solveInitialSystemEqSystem (initialization): time 1.844e-06/0.007441, allocations: 0 / 1.193 GB, free: 5.137 MB / 1.136 GB
Notification: Performance of matching and sorting (n=26) (initialization): time 0.000162/0.007604, allocations: 267 kB / 1.193 GB, free: 4.844 MB / 1.136 GB
Notification: Performance of prepare postOptimizeDAE: time 3.606e-05/0.00764, allocations: 67.39 kB / 1.193 GB, free: 4.766 MB / 1.136 GB
Notification: Performance of postOpt simplifyComplexFunction (initialization): time 3.587e-06/0.007643, allocations: 0 / 1.193 GB, free: 4.766 MB / 1.136 GB
Notification: Performance of postOpt tearingSystem (initialization): time 1.001e-05/0.007653, allocations: 8.094 kB / 1.193 GB, free: 4.758 MB / 1.136 GB
Notification: Performance of postOpt solveSimpleEquations (initialization): time 7.528e-05/0.007728, allocations: 35.92 kB / 1.193 GB, free: 4.723 MB / 1.136 GB
Notification: Performance of postOpt calculateStrongComponentJacobians (initialization): time 3.486e-06/0.007732, allocations: 4 kB / 1.194 GB, free: 4.719 MB / 1.136 GB
Notification: Performance of postOpt simplifyAllExpressions (initialization): time 5.155e-05/0.007783, allocations: 19.89 kB / 1.194 GB, free: 4.699 MB / 1.136 GB
Notification: Performance of postOpt collapseArrayExpressions (initialization): time 1.176e-05/0.007795, allocations: 11.98 kB / 1.194 GB, free: 4.688 MB / 1.136 GB
Warning: Assuming fixed start value for the following 4 variables:
         SlewRateLimiter.y:DISCRETE(flow=false fixed = true )  \"Connector of Real output signal\" type: Real
         SlewRateLimiter.y_limited_by_rate:DISCRETE(fixed = true )  \"Limited value without absolute value limit\" type: Real
         SlewRateLimiter.y_rcbl_by_rate_min:DISCRETE(fixed = true )  \"Reachable output in next step if input is only limited by falling rate\" type: Real
         SlewRateLimiter.y_rcbl_by_rate_max:DISCRETE(fixed = true )  \"Reachable output in next step if input is only limited by rising rate\" type: Real
Notification: Performance of preBalanceInitialSystem (initialization_lambda0): time 0.0001023/0.007898, allocations: 177 kB / 1.194 GB, free: 4.5 MB / 1.136 GB
Notification: Performance of partitionIndependentBlocks (initialization_lambda0): time 6.865e-05/0.007966, allocations: 163.9 kB / 1.194 GB, free: 4.297 MB / 1.136 GB
Notification: Performance of analyzeInitialSystem (initialization_lambda0): time 0.0001224/0.008089, allocations: 263.4 kB / 1.194 GB, free: 3.992 MB / 1.136 GB
Notification: Performance of solveInitialSystemEqSystem (initialization_lambda0): time 1.513e-06/0.00809, allocations: 3.984 kB / 1.194 GB, free: 3.988 MB / 1.136 GB
Notification: Performance of matching and sorting (n=26) (initialization_lambda0): time 0.0001493/0.008239, allocations: 259 kB / 1.194 GB, free: 3.703 MB / 1.136 GB
Notification: Performance of prepare postOptimizeDAE: time 2.284e-05/0.008262, allocations: 63.39 kB / 1.194 GB, free: 3.629 MB / 1.136 GB
Notification: Performance of postOpt simplifyComplexFunction (initialization): time 2.605e-06/0.008265, allocations: 8.156 kB / 1.194 GB, free: 3.621 MB / 1.136 GB
Notification: Performance of postOpt tearingSystem (initialization): time 1.884e-06/0.008267, allocations: 0 / 1.194 GB, free: 3.621 MB / 1.136 GB
Notification: Performance of postOpt solveSimpleEquations (initialization): time 4.614e-05/0.008313, allocations: 31.98 kB / 1.194 GB, free: 3.59 MB / 1.136 GB
Notification: Performance of postOpt calculateStrongComponentJacobians (initialization): time 4.588e-06/0.008317, allocations: 11.88 kB / 1.194 GB, free: 3.578 MB / 1.136 GB
Notification: Performance of postOpt simplifyAllExpressions (initialization): time 4.455e-05/0.008362, allocations: 15.92 kB / 1.194 GB, free: 3.562 MB / 1.136 GB
Notification: Performance of postOpt collapseArrayExpressions (initialization): time 9.027e-06/0.008371, allocations: 12 kB / 1.194 GB, free: 3.551 MB / 1.136 GB
Warning: Assuming fixed start value for the following 4 variables:
         SlewRateLimiter.y:DISCRETE(flow=false fixed = true )  \"Connector of Real output signal\" type: Real
         SlewRateLimiter.y_limited_by_rate:DISCRETE(fixed = true )  \"Limited value without absolute value limit\" type: Real
         SlewRateLimiter.y_rcbl_by_rate_min:DISCRETE(fixed = true )  \"Reachable output in next step if input is only limited by falling rate\" type: Real
         SlewRateLimiter.y_rcbl_by_rate_max:DISCRETE(fixed = true )  \"Reachable output in next step if input is only limited by rising rate\" type: Real
Notification: Model statistics after passing the back-end for initialization:
 * Number of independent subsystems: 7
 * Number of states: 0 ()
 * Number of discrete variables: 21 ($PRE.SlewRateLimiter.y,SlewRateLimiter.y,$PRE.SlewRateLimiter.y_limited_by_rate,SlewRateLimiter.y_limited_by_rate,$PRE.SlewRateLimiter.y_rcbl_by_rate_min,SlewRateLimiter.y_rcbl_by_rate_min,$PRE.SlewRateLimiter.y_rcbl_by_rate_max,SlewRateLimiter.y_rcbl_by_rate_max,SlewRateLimiter.firstTrigger,$PRE.SlewRateLimiter.firstTrigger,SlewRateLimiter.sampleTrigger,$whenCondition4,$whenCondition3,$whenCondition1,Testdata.nextEventScaled,Testdata.nextEvent,$PRE.Testdata.nextEvent,Testdata.last,Testdata.b,Testdata.a,$whenCondition2)
 * Number of discrete states: 0 ()
 * Number of clocked states: 0 ()
 * Top-level inputs: 0
Notification: Strong component statistics for initialization (20):
 * Single equations (assignments): 18
 * Array equations: 0
 * Algorithm blocks: 2
 * Record equations: 0
 * When equations: 0
 * If-equations: 0
 * Equation systems (not torn): 0
 * Torn equation systems: 0
 * Mixed (continuous/discrete) equation systems: 0
Notification: Performance of prepare postOptimizeDAE: time 9.598e-05/0.008467, allocations: 267.7 kB / 1.195 GB, free: 3.27 MB / 1.136 GB
Notification: Performance of postOpt lateInlineFunction (simulation): time 2.469e-05/0.008492, allocations: 27.97 kB / 1.195 GB, free: 3.242 MB / 1.136 GB
Notification: Performance of postOpt wrapFunctionCalls (simulation): time 2.577e-05/0.008517, allocations: 26.11 kB / 1.195 GB, free: 3.219 MB / 1.136 GB
Notification: Performance of postOpt inlineArrayEqn (simulation): time 2.214e-06/0.00852, allocations: 3.938 kB / 1.195 GB, free: 3.215 MB / 1.136 GB
Notification: Performance of postOpt constantLinearSystem (simulation): time 1.984e-06/0.008522, allocations: 4 kB / 1.195 GB, free: 3.211 MB / 1.136 GB
Notification: Performance of postOpt simplifysemiLinear (simulation): time 3.016e-06/0.008525, allocations: 0 / 1.195 GB, free: 3.211 MB / 1.136 GB
Notification: Performance of postOpt removeSimpleEquations (simulation): time 0.0004026/0.008927, allocations: 0.5497 MB / 1.195 GB, free: 2.602 MB / 1.136 GB
Notification: Performance of postOpt simplifyComplexFunction (simulation): time 1.002e-06/0.008928, allocations: 0 / 1.195 GB, free: 2.602 MB / 1.136 GB
Notification: Performance of postOpt solveSimpleEquations (simulation): time 4.171e-05/0.00897, allocations: 15.88 kB / 1.195 GB, free: 2.586 MB / 1.136 GB
Notification: Performance of postOpt tearingSystem (simulation): time 2.084e-06/0.008972, allocations: 3.938 kB / 1.195 GB, free: 2.582 MB / 1.136 GB
Notification: Performance of postOpt inputDerivativesUsed (simulation): time 1.571e-05/0.008988, allocations: 15.98 kB / 1.195 GB, free: 2.566 MB / 1.136 GB
Notification: Performance of postOpt calculateStrongComponentJacobians (simulation): time 1.582e-06/0.008989, allocations: 3.984 kB / 1.195 GB, free: 2.562 MB / 1.136 GB
Notification: Performance of postOpt calculateStateSetsJacobians (simulation): time 6.11e-07/0.00899, allocations: 0 / 1.195 GB, free: 2.562 MB / 1.136 GB
Notification: Performance of postOpt symbolicJacobian (simulation): time 0.0002875/0.009277, allocations: 0.5473 MB / 1.196 GB, free: 1.961 MB / 1.136 GB
Notification: Performance of postOpt removeConstants (simulation): time 1.736e-05/0.009295, allocations: 27.84 kB / 1.196 GB, free: 1.934 MB / 1.136 GB
Notification: Performance of postOpt simplifyTimeIndepFuncCalls (simulation): time 2.54e-05/0.00932, allocations: 7.938 kB / 1.196 GB, free: 1.926 MB / 1.136 GB
Notification: Performance of postOpt simplifyAllExpressions (simulation): time 6.54e-05/0.009386, allocations: 11.98 kB / 1.196 GB, free: 1.914 MB / 1.136 GB
Notification: Performance of postOpt findZeroCrossings (simulation): time 2.448e-05/0.00941, allocations: 15.92 kB / 1.196 GB, free: 1.898 MB / 1.136 GB
Notification: Performance of postOpt collapseArrayExpressions (simulation): time 1.479e-05/0.009425, allocations: 8 kB / 1.196 GB, free: 1.891 MB / 1.136 GB
Notification: Performance of sorting global known variables: time 4.292e-05/0.009468, allocations: 66.78 kB / 1.196 GB, free: 1.82 MB / 1.136 GB
Notification: Performance of sort global known variables: time 5e-08/0.009468, allocations: 0 / 1.196 GB, free: 1.82 MB / 1.136 GB
Notification: Performance of remove unused functions: time 0.0002099/0.009678, allocations: 87.89 kB / 1.196 GB, free: 1.734 MB / 1.136 GB
Notification: Model statistics after passing the back-end for simulation:
 * Number of independent subsystems: 1
 * Number of states: 1 (SlewRateLimiterClaRa.y_aux)
 * Number of discrete variables: 15 (SlewRateLimiter.sampleTrigger,$whenCondition1,$whenCondition2,$whenCondition3,$whenCondition4,SlewRateLimiter.firstTrigger,SlewRateLimiter.y,SlewRateLimiter.y_rcbl_by_rate_max,SlewRateLimiter.y_rcbl_by_rate_min,SlewRateLimiter.y_limited_by_rate,Testdata.a,Testdata.b,Testdata.last,Testdata.nextEvent,Testdata.nextEventScaled)
 * Number of discrete states: 12 (Testdata.nextEvent,Testdata.last,Testdata.nextEventScaled,Testdata.b,Testdata.a,$whenCondition2,$whenCondition4,SlewRateLimiter.y,SlewRateLimiter.y_limited_by_rate,SlewRateLimiter.y_rcbl_by_rate_min,SlewRateLimiter.y_rcbl_by_rate_max,$whenCondition3)
 * Number of clocked states: 0 ()
 * Top-level inputs: 0
Notification: Strong component statistics for simulation (9):
 * Single equations (assignments): 6
 * Array equations: 0
 * Algorithm blocks: 2
 * Record equations: 0
 * When equations: 1
 * If-equations: 0
 * Equation systems (not torn): 0
 * Torn equation systems: 0
 * Mixed (continuous/discrete) equation systems: 0
Notification: Performance of Backend phase and start with SimCode phase: time 0.0002934/0.009971, allocations: 0.7433 MB / 1.197 GB, free: 0.9688 MB / 1.136 GB
Notification: Performance of simCode: created initialization part: time 0.0003036/0.01027, allocations: 0.5843 MB / 1.197 GB, free: 300 kB / 1.136 GB
Notification: Performance of simCode: created event and clocks part: time 2.935e-06/0.01028, allocations: 0 / 1.197 GB, free: 300 kB / 1.136 GB
Notification: Performance of simCode: created simulation system equations: time 0.0001123/0.01039, allocations: 258.9 kB / 1.198 GB, free: 0 / 1.136 GB
Notification: Performance of simCode: created of all other equations (e.g. parameter, nominal, assert, etc): time 0.0001802/0.01057, allocations: 39.52 kB / 1.198 GB, free: 15.96 MB / 1.151 GB
Notification: Performance of simCode: created linear, non-linear and system jacobian parts: time 0.001137/0.01171, allocations: 1.715 MB / 1.199 GB, free: 14.12 MB / 1.151 GB
Notification: Performance of simCode: some other stuff during SimCode phase: time 4.014e-05/0.01175, allocations: 84.2 kB / 1.199 GB, free: 14.02 MB / 1.151 GB
Notification: Performance of simCode: alias equations: time 3.855e-05/0.01179, allocations: 16.64 kB / 1.199 GB, free: 14 MB / 1.151 GB
Notification: Performance of simCode: all other stuff during SimCode phase: time 0.0001483/0.01193, allocations: 143.3 kB / 1.2 GB, free: 13.86 MB / 1.151 GB
Notification: Performance of SimCode: time 6.01e-07/0.01193, allocations: 0 / 1.2 GB, free: 13.86 MB / 1.151 GB
Notification: Performance of FMU documentation: time 0.02323/0.03517, allocations: 7.891 MB / 1.207 GB, free: 6.375 MB / 1.151 GB
Notification: FMU-only work: backend 0.0001722, simCode 0.0006649, templates 0
Notification: Performance of buildModelFMU: Generate the FMI files: time 0.05978/0.09495, allocations: 1.363 MB / 1.209 GB, free: 4.945 MB / 1.151 GB
Notification: Building FMU for platform 'static' (1/1).
Notification: Finished FMU for platform 'static' (1/1).
Notification: Performance of buildModelFMU: Generate platform static: time 2.263/2.358, allocations: 15.38 kB / 1.209 GB, free: 4.93 MB / 1.151 GB
"
[Timeout remaining time 658]
(rm -f TransiEnt_TransiEnt.Basics.Blocks.Check.CompareSlewRateLimiters.pipe ; mkfifo TransiEnt_TransiEnt.Basics.Blocks.Check.CompareSlewRateLimiters.pipe ; head -c 1048576 < TransiEnt_TransiEnt.Basics.Blocks.Check.CompareSlewRateLimiters.pipe >> ../files/TransiEnt_TransiEnt.Basics.Blocks.Check.CompareSlewRateLimiters.sim & (cd run_OMSimulator && /home/hudson/saved_omc/OMSimulator/install/bin/OMSimulator  --stripRoot --tempDir=temp_TransiEnt_TransiEnt_Basics_Blocks_Check_CompareSlewRateLimiters_fmu --startTime=0 --stopTime=26000 --stepSize=29.9885 --mode=me --timeout=240 --tolerance=1e-06 ../TransiEnt_TransiEnt_Basics_Blocks_Check_CompareSlewRateLimiters.fmu) > TransiEnt_TransiEnt.Basics.Blocks.Check.CompareSlewRateLimiters.pipe 2>&1) [Timeout 252.0]
(rm -f TransiEnt_TransiEnt.Basics.Blocks.Check.CompareSlewRateLimiters_OMSimulator-cs-cvode.pipe ; mkfifo TransiEnt_TransiEnt.Basics.Blocks.Check.CompareSlewRateLimiters_OMSimulator-cs-cvode.pipe ; head -c 1048576 < TransiEnt_TransiEnt.Basics.Blocks.Check.CompareSlewRateLimiters_OMSimulator-cs-cvode.pipe >> /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/files/TransiEnt_TransiEnt.Basics.Blocks.Check.CompareSlewRateLimiters_OMSimulator-cs-cvode.sim & (cd run_OMSimulator-cs-cvode && /home/hudson/saved_omc/OMSimulator/install/bin/OMSimulator  --stripRoot --tempDir=temp_TransiEnt_TransiEnt_Basics_Blocks_Check_CompareSlewRateLimiters_OMSimulator-cs-cvode_fmu --startTime=0 --stopTime=26000 --stepSize=29.9885 --mode=cs --timeout=240 --tolerance=1e-06 ../TransiEnt_TransiEnt_Basics_Blocks_Check_CompareSlewRateLimiters_OMSimulator-cs-cvode.fmu) > TransiEnt_TransiEnt.Basics.Blocks.Check.CompareSlewRateLimiters_OMSimulator-cs-cvode.pipe 2>&1) [Timeout 252.0]
(rm -f TransiEnt_TransiEnt.Basics.Blocks.Check.CompareSlewRateLimiters_OMSimulator-cs-euler.pipe ; mkfifo TransiEnt_TransiEnt.Basics.Blocks.Check.CompareSlewRateLimiters_OMSimulator-cs-euler.pipe ; head -c 1048576 < TransiEnt_TransiEnt.Basics.Blocks.Check.CompareSlewRateLimiters_OMSimulator-cs-euler.pipe >> /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/files/TransiEnt_TransiEnt.Basics.Blocks.Check.CompareSlewRateLimiters_OMSimulator-cs-euler.sim & (cd run_OMSimulator-cs-euler && /home/hudson/saved_omc/OMSimulator/install/bin/OMSimulator  --stripRoot --tempDir=temp_TransiEnt_TransiEnt_Basics_Blocks_Check_CompareSlewRateLimiters_OMSimulator-cs-euler_fmu --startTime=0 --stopTime=26000 --stepSize=29.9885 --mode=cs --timeout=240 --tolerance=1e-06 ../TransiEnt_TransiEnt_Basics_Blocks_Check_CompareSlewRateLimiters_OMSimulator-cs-euler.fmu) > TransiEnt_TransiEnt.Basics.Blocks.Check.CompareSlewRateLimiters_OMSimulator-cs-euler.pipe 2>&1) [Timeout 252.0]
(rm -f TransiEnt_TransiEnt.Basics.Blocks.Check.CompareSlewRateLimiters_fmpy.pipe ; mkfifo TransiEnt_TransiEnt.Basics.Blocks.Check.CompareSlewRateLimiters_fmpy.pipe ; head -c 1048576 < TransiEnt_TransiEnt.Basics.Blocks.Check.CompareSlewRateLimiters_fmpy.pipe >> /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/files/TransiEnt_TransiEnt.Basics.Blocks.Check.CompareSlewRateLimiters_fmpy.sim & (cd run_fmpy && python3 -m fmpy simulate --output-file ../TransiEnt_TransiEnt.Basics.Blocks.Check.CompareSlewRateLimiters_fmpy_res.csv --start-time 0 --stop-time 26000 --timeout 240 --relative-tolerance 1e-06 --interface-type ModelExchange --solver CVode --output-interval 29.9885 ../TransiEnt_TransiEnt_Basics_Blocks_Check_CompareSlewRateLimiters.fmu) > TransiEnt_TransiEnt.Basics.Blocks.Check.CompareSlewRateLimiters_fmpy.pipe 2>&1) [Timeout 252.0]
(rm -f TransiEnt_TransiEnt.Basics.Blocks.Check.CompareSlewRateLimiters_fmpy-fmi3-cs-cvode.pipe ; mkfifo TransiEnt_TransiEnt.Basics.Blocks.Check.CompareSlewRateLimiters_fmpy-fmi3-cs-cvode.pipe ; head -c 1048576 < TransiEnt_TransiEnt.Basics.Blocks.Check.CompareSlewRateLimiters_fmpy-fmi3-cs-cvode.pipe >> /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/files/TransiEnt_TransiEnt.Basics.Blocks.Check.CompareSlewRateLimiters_fmpy-fmi3-cs-cvode.sim & (cd run_fmpy-fmi3-cs-cvode && python3 -m fmpy simulate --output-file ../TransiEnt_TransiEnt.Basics.Blocks.Check.CompareSlewRateLimiters_fmpy-fmi3-cs-cvode_res.csv --start-time 0 --stop-time 26000 --timeout 240 --relative-tolerance 1e-06 --interface-type CoSimulation --output-interval 29.9885 ../TransiEnt_TransiEnt_Basics_Blocks_Check_CompareSlewRateLimiters_fmpy-fmi3-cs-cvode.fmu) > TransiEnt_TransiEnt.Basics.Blocks.Check.CompareSlewRateLimiters_fmpy-fmi3-cs-cvode.pipe 2>&1) [Timeout 252.0]
[Calling sys.exit(0), Time elapsed: 9.297128857113421]