Running: ./testmodel.py --libraries=/home/hudson/saved_omc/libraries/.openmodelica/libraries --ompython_omhome=/usr OpenIPSL_2.0.0_OpenIPSL.Examples.SevenBus.Network.conf.json
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica_Synchronous 0.93.0/package.mo", uses=false) [Timeout 180]
"Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica_Synchronous 0.93.0/package.mo): time 0.05662/0.05662, allocations: 9.509 MB / 19.29 MB, free: 84 kB / 18.57 MB
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica_Synchronous 0.93.0/WorkInProgress.mo:11:9-20:24:writable] Warning: External function annotation should occur on the external-clause, not on the function.
[/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica_Synchronous 0.93.0/WorkInProgress.mo:130:9-144:24:writable] Warning: External function annotation should occur on the external-clause, not on the function.
Notification: Performance of NFInstanceAPI.mkTop(<interactive>): time 0.008923/0.06554, allocations: 3.262 MB / 22.55 MB, free: 3.27 MB / 24.77 MB
"
[Timeout remaining time 180]
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.1.0+maint.om/package.mo", uses=false) [Timeout 180]
"Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.1.0+maint.om/package.mo): time 0.0006895/0.0006895, allocations: 73.88 kB / 23.36 MB, free: 2.492 MB / 24.77 MB
Notification: Performance of NFInstanceAPI.mkTop(<interactive>): time 0.001398/0.002088, allocations: 455.5 kB / 23.81 MB, free: 2.043 MB / 24.77 MB
"
[Timeout remaining time 180]
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 3.2.3+maint.om/package.mo", uses=false) [Timeout 180]
"Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 3.2.3+maint.om/package.mo): time 0.8747/0.8747, allocations: 158.6 MB / 183.1 MB, free: 6.742 MB / 186.7 MB
Notification: Performance of NFInstanceAPI.mkTop(<interactive>): time 0.1561/1.031, allocations: 49.49 MB / 232.6 MB, free: 8.07 MB / 234.7 MB
"
[Timeout remaining time 179]
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.1.0+maint.om/package.mo", uses=false) [Timeout 180]
"Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.1.0+maint.om/package.mo): time 0.001398/0.001398, allocations: 164.3 kB / 233.5 MB, free: 7.184 MB / 234.7 MB
Notification: Performance of NFInstanceAPI.mkTop(<interactive>): time 0.001685/0.003083, allocations: 473.7 kB / 234 MB, free: 6.723 MB / 234.7 MB
"
[Timeout remaining time 180]
loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/OpenIPSL 2.0.0/package.mo", uses=false) [Timeout 180]
"Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/OpenIPSL 2.0.0/package.mo): time 0.2454/0.2454, allocations: 59.71 MB / 294.4 MB, free: 10.15 MB / 298.7 MB
Notification: Performance of NFInstanceAPI.mkTop(<interactive>): time 0.03055/0.2759, allocations: 20.37 MB / 314.8 MB, free: 5.727 MB / 314.7 MB
"
[Timeout remaining time 180]
Using package OpenIPSL with version 2.0.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/OpenIPSL 2.0.0/package.mo)
Using package Complex with version 4.1.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.1.0+maint.om/package.mo)
Using package Modelica with version 3.2.3 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 3.2.3+maint.om/package.mo)
Using package ModelicaServices with version 4.1.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.1.0+maint.om/package.mo)
Using package Modelica_Synchronous with version 0.93.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica_Synchronous 0.93.0/package.mo)
Running command: setCommandLineOptions("--fmiFlags=s:cvode")
Running command: "" <> buildModelFMU(OpenIPSL.Examples.SevenBus.Network,fileNamePrefix="OpenIPSL_2_0_0_OpenIPSL_Examples_SevenBus_Network",fmuType="me_cs",version="2.0+3.0",platforms={"static"})
"" <> buildModelFMU(OpenIPSL.Examples.SevenBus.Network,fileNamePrefix="OpenIPSL_2_0_0_OpenIPSL_Examples_SevenBus_Network",fmuType="me_cs",version="2.0+3.0",platforms={"static"}) [Timeout 660]
"Notification: Performance of FrontEnd - loaded program: time 1.483e-06/1.483e-06, allocations: 0 / 316 MB, free: 4.473 MB / 314.7 MB
Notification: Performance of FrontEnd - Absyn->SCode: time 1.861e-05/2.009e-05, allocations: 10.25 kB / 316 MB, free: 4.461 MB / 314.7 MB
Notification: Performance of NFInst.instantiate(OpenIPSL.Examples.SevenBus.Network): time 0.1602/0.1602, allocations: 29.15 MB / 345.2 MB, free: 2.988 MB / 330.7 MB
Notification: Performance of NFInst.instExpressions: time 0.02691/0.1871, allocations: 14.13 MB / 359.3 MB, free: 11 MB / 346.7 MB
Notification: Performance of NFInst.updateImplicitVariability: time 0.01061/0.1977, allocations: 189.8 kB / 359.5 MB, free: 10.92 MB / 346.7 MB
Notification: Performance of NFTyping.typeComponents: time 0.008266/0.206, allocations: 2.147 MB / 361.7 MB, free: 9.266 MB / 346.7 MB
Notification: Performance of NFTyping.typeBindings: time 0.01884/0.2248, allocations: 4.704 MB / 366.4 MB, free: 5.441 MB / 346.7 MB
Notification: Performance of NFTyping.typeClassSections: time 0.01188/0.2367, allocations: 7.162 MB / 373.5 MB, free: 15.76 MB / 362.7 MB
Notification: Performance of NFFlatten.flatten: time 0.01561/0.2523, allocations: 15 MB / 388.5 MB, free: 1.168 MB / 362.7 MB
Notification: Performance of NFFlatten.resolveConnections: time 0.003294/0.2556, allocations: 2.511 MB / 391 MB, free: 14.54 MB / 378.7 MB
Notification: Performance of NFEvalConstants.evaluate: time 0.01046/0.2661, allocations: 9.885 MB / 400.9 MB, free: 4.523 MB / 378.7 MB
Notification: Performance of NFSimplifyModel.simplify: time 0.004428/0.2705, allocations: 5.164 MB / 406.1 MB, free: 15.34 MB / 394.7 MB
Notification: Performance of NFPackage.collectConstants: time 0.001572/0.2721, allocations: 1.559 MB / 407.6 MB, free: 13.79 MB / 394.7 MB
Notification: Performance of NFFlatten.collectFunctions: time 0.00183/0.2739, allocations: 1.793 MB / 409.4 MB, free: 11.99 MB / 394.7 MB
Notification: Performance of NFScalarize.scalarize: time 0.001488/0.2754, allocations: 2.509 MB / 411.9 MB, free: 9.477 MB / 394.7 MB
Notification: Performance of NFVerifyModel.verify: time 0.002908/0.2783, allocations: 3.06 MB / 415 MB, free: 6.41 MB / 394.7 MB
Notification: Performance of NFConvertDAE.convert: time 0.009214/0.2875, allocations: 8.942 MB / 423.9 MB, free: 13.44 MB / 410.7 MB
Notification: Performance of FrontEnd - DAE generated: time 1.342e-05/0.2875, allocations: 0 / 423.9 MB, free: 13.44 MB / 410.7 MB
Notification: Performance of FrontEnd: time 1.273e-06/0.2875, allocations: 0 / 423.9 MB, free: 13.44 MB / 410.7 MB
Notification: Performance of Transformations before backend: time 0.0001677/0.2877, allocations: 0 / 423.9 MB, free: 13.44 MB / 410.7 MB
Notification: Model statistics after passing the front-end and creating the data structures used by the back-end:
 * Number of equations: 1550
 * Number of variables: 1550
Notification: Performance of Generate backend data structure: time 0.07828/0.366, allocations: 17.71 MB / 441.7 MB, free: 11.59 MB / 426.7 MB
Notification: Performance of prepare preOptimizeDAE: time 3.89e-05/0.366, allocations: 8.031 kB / 441.7 MB, free: 11.58 MB / 426.7 MB
Notification: Performance of preOpt introduceOutputAliases (simulation): time 0.0009286/0.3669, allocations: 0.8681 MB / 442.5 MB, free: 10.7 MB / 426.7 MB
Notification: Performance of preOpt normalInlineFunction (simulation): time 0.01009/0.377, allocations: 3.282 MB / 445.8 MB, free: 7.418 MB / 426.7 MB
Notification: Performance of preOpt evaluateParameters (simulation): time 0.006235/0.3833, allocations: 4.485 MB / 450.3 MB, free: 2.844 MB / 426.7 MB
Notification: Performance of preOpt simplifyIfEquations (simulation): time 0.001629/0.3849, allocations: 3.886 MB / 454.2 MB, free: 14.18 MB / 442.7 MB
Notification: Performance of preOpt expandDerOperator (simulation): time 0.0007427/0.3856, allocations: 0.6951 MB / 454.9 MB, free: 13.49 MB / 442.7 MB
Notification: Performance of preOpt clockPartitioning (simulation): time 0.006116/0.3918, allocations: 6.076 MB / 461 MB, free: 6.926 MB / 442.7 MB
Notification: Performance of preOpt findStateOrder (simulation): time 7.602e-05/0.3918, allocations: 7.938 kB / 461 MB, free: 6.918 MB / 442.7 MB
Notification: Performance of preOpt replaceEdgeChange (simulation): time 0.0003657/0.3922, allocations: 252 kB / 461.2 MB, free: 6.672 MB / 442.7 MB
Notification: Performance of preOpt inlineArrayEqn (simulation): time 7.041e-05/0.3923, allocations: 152 kB / 461.4 MB, free: 6.523 MB / 442.7 MB
Notification: Performance of preOpt removeEqualRHS (simulation): time 0.003497/0.3958, allocations: 2.215 MB / 463.6 MB, free: 4.301 MB / 442.7 MB
Warning: The model contains alias variables with redundant start and/or conflicting nominal values. It is recommended to resolve the conflicts, because otherwise the system could be hard to solve. To print the conflicting alias sets and the chosen candidates please use -d=aliasConflicts.
Notification: Performance of preOpt removeSimpleEquations (simulation): time 0.02979/0.4256, allocations: 18.17 MB / 481.7 MB, free: 1.816 MB / 458.7 MB
Notification: Performance of preOpt comSubExp (simulation): time 0.01118/0.4367, allocations: 5.711 MB / 487.5 MB, free: 12.07 MB / 474.7 MB
Notification: Performance of preOpt resolveLoops (simulation): time 0.002223/0.439, allocations: 1.145 MB / 488.6 MB, free: 10.9 MB / 474.7 MB
Notification: Performance of preOpt evalFunc (simulation): time 0.0003382/0.4393, allocations: 124.7 kB / 488.7 MB, free: 10.77 MB / 474.7 MB
Notification: Performance of preOpt encapsulateWhenConditions (simulation): time 0.00335/0.4426, allocations: 2.374 MB / 491.1 MB, free: 8.297 MB / 474.7 MB
Notification: Performance of pre-optimization done (n=607): time 1.072e-05/0.4427, allocations: 0 / 491.1 MB, free: 8.297 MB / 474.7 MB
Notification: Performance of matching and sorting (n=607): time 0.09971/0.5424, allocations: 29 MB / 0.5079 GB, free: 11.18 MB / 0.4948 GB
Notification: Performance of inlineWhenForInitialization (initialization): time 0.0003394/0.5427, allocations: 1.112 MB / 0.509 GB, free: 9.809 MB / 0.4948 GB
Notification: Performance of selectInitializationVariablesDAE (initialization): time 0.006771/0.5495, allocations: 6.056 MB / 0.5149 GB, free: 3.789 MB / 0.4948 GB
Notification: Performance of collectPreVariables (initialization): time 0.001236/0.5507, allocations: 161.7 kB / 0.5151 GB, free: 3.625 MB / 0.4948 GB
Notification: Performance of collectInitialEqns (initialization): time 0.001366/0.5521, allocations: 2.31 MB / 0.5173 GB, free: 1.293 MB / 0.4948 GB
Notification: Performance of collectInitialBindings (initialization): time 0.2682/0.8202, allocations: 2.286 MB / 0.5196 GB, free: 133.4 MB / 0.4949 GB
Notification: Performance of simplifyInitialFunctions (initialization): time 0.002916/0.8232, allocations: 1.589 MB / 0.5211 GB, free: 133.3 MB / 0.4949 GB
Notification: Performance of setup shared object (initialization): time 3.094e-05/0.8232, allocations: 306.9 kB / 0.5214 GB, free: 133 MB / 0.4949 GB
Notification: Performance of preBalanceInitialSystem (initialization): time 0.004046/0.8272, allocations: 1.696 MB / 0.5231 GB, free: 132.8 MB / 0.4949 GB
Notification: Performance of partitionIndependentBlocks (initialization): time 0.004804/0.832, allocations: 3.494 MB / 0.5265 GB, free: 131 MB / 0.4949 GB
Notification: Performance of analyzeInitialSystem (initialization): time 0.008468/0.8405, allocations: 4.746 MB / 0.5311 GB, free: 130.3 MB / 0.4949 GB
Notification: Performance of solveInitialSystemEqSystem (initialization): time 3.018e-05/0.8405, allocations: 3.562 kB / 0.5311 GB, free: 130.3 MB / 0.4949 GB
Warning: Initialization start-value cycle: the start attribute of 'GEN1.sT5B.TransducerDelay.y' depends, directly or transitively, on the variable itself. The start attribute defines the initial value of 'GEN1.sT5B.TransducerDelay.y' and therefore cannot be computed from it, so this start value cannot be used to initialize the variable (see Modelica Specification section 4.9.6). This is possibly a modeling error; if unintended, give 'GEN1.sT5B.TransducerDelay.y' a start value that does not depend on itself. Use the transformational debugger to inspect the dependency chain.
Warning: Initialization start-value cycle: the start attribute of 'GEN1.sT5B.imLimitedLeadLag2.integrator.y' depends, directly or transitively, on the variable itself. The start attribute defines the initial value of 'GEN1.sT5B.imLimitedLeadLag2.integrator.y' and therefore cannot be computed from it, so this start value cannot be used to initialize the variable (see Modelica Specification section 4.9.6). This is possibly a modeling error; if unintended, give 'GEN1.sT5B.imLimitedLeadLag2.integrator.y' a start value that does not depend on itself. Use the transformational debugger to inspect the dependency chain.
Warning: Initialization start-value cycle: the start attribute of 'GEN1.sT5B.imLimitedLeadLag.integrator.y' depends, directly or transitively, on the variable itself. The start attribute defines the initial value of 'GEN1.sT5B.imLimitedLeadLag.integrator.y' and therefore cannot be computed from it, so this start value cannot be used to initialize the variable (see Modelica Specification section 4.9.6). This is possibly a modeling error; if unintended, give 'GEN1.sT5B.imLimitedLeadLag.integrator.y' a start value that does not depend on itself. Use the transformational debugger to inspect the dependency chain.
Warning: Initialization start-value cycle: the start attribute of 'GEN3.sT5B.imLimitedLeadLag2.integrator.y' depends, directly or transitively, on the variable itself. The start attribute defines the initial value of 'GEN3.sT5B.imLimitedLeadLag2.integrator.y' and therefore cannot be computed from it, so this start value cannot be used to initialize the variable (see Modelica Specification section 4.9.6). This is possibly a modeling error; if unintended, give 'GEN3.sT5B.imLimitedLeadLag2.integrator.y' a start value that does not depend on itself. Use the transformational debugger to inspect the dependency chain.
Warning: Initialization start-value cycle: the start attribute of 'GEN3.sT5B.imLimitedLeadLag.integrator.y' depends, directly or transitively, on the variable itself. The start attribute defines the initial value of 'GEN3.sT5B.imLimitedLeadLag.integrator.y' and therefore cannot be computed from it, so this start value cannot be used to initialize the variable (see Modelica Specification section 4.9.6). This is possibly a modeling error; if unintended, give 'GEN3.sT5B.imLimitedLeadLag.integrator.y' a start value that does not depend on itself. Use the transformational debugger to inspect the dependency chain.
Warning: Initialization start-value cycle: the start attribute of 'GEN3.sT5B.TransducerDelay.y' depends, directly or transitively, on the variable itself. The start attribute defines the initial value of 'GEN3.sT5B.TransducerDelay.y' and therefore cannot be computed from it, so this start value cannot be used to initialize the variable (see Modelica Specification section 4.9.6). This is possibly a modeling error; if unintended, give 'GEN3.sT5B.TransducerDelay.y' a start value that does not depend on itself. Use the transformational debugger to inspect the dependency chain.
Warning: Initialization start-value cycle: the start attribute of 'GEN3.sT5B.TransducerDelay.state' depends, directly or transitively, on the variable itself. The start attribute defines the initial value of 'GEN3.sT5B.TransducerDelay.state' and therefore cannot be computed from it, so this start value cannot be used to initialize the variable (see Modelica Specification section 4.9.6). This is possibly a modeling error; if unintended, give 'GEN3.sT5B.TransducerDelay.state' a start value that does not depend on itself. Use the transformational debugger to inspect the dependency chain.
Warning: Initialization start-value cycle: the start attribute of 'GEN2.sT5B.imLimitedLeadLag.integrator.y' depends, directly or transitively, on the variable itself. The start attribute defines the initial value of 'GEN2.sT5B.imLimitedLeadLag.integrator.y' and therefore cannot be computed from it, so this start value cannot be used to initialize the variable (see Modelica Specification section 4.9.6). This is possibly a modeling error; if unintended, give 'GEN2.sT5B.imLimitedLeadLag.integrator.y' a start value that does not depend on itself. Use the transformational debugger to inspect the dependency chain.
Warning: Initialization start-value cycle: the start attribute of 'GEN2.sT5B.imLimitedLeadLag2.integrator.y' depends, directly or transitively, on the variable itself. The start attribute defines the initial value of 'GEN2.sT5B.imLimitedLeadLag2.integrator.y' and therefore cannot be computed from it, so this start value cannot be used to initialize the variable (see Modelica Specification section 4.9.6). This is possibly a modeling error; if unintended, give 'GEN2.sT5B.imLimitedLeadLag2.integrator.y' a start value that does not depend on itself. Use the transformational debugger to inspect the dependency chain.
Warning: Initialization start-value cycle: the start attribute of 'GEN2.sT5B.TransducerDelay.y' depends, directly or transitively, on the variable itself. The start attribute defines the initial value of 'GEN2.sT5B.TransducerDelay.y' and therefore cannot be computed from it, so this start value cannot be used to initialize the variable (see Modelica Specification section 4.9.6). This is possibly a modeling error; if unintended, give 'GEN2.sT5B.TransducerDelay.y' a start value that does not depend on itself. Use the transformational debugger to inspect the dependency chain.
Warning: Initialization start-value cycle: the start attribute of 'GEN2.sT5B.TransducerDelay.state' depends, directly or transitively, on the variable itself. The start attribute defines the initial value of 'GEN2.sT5B.TransducerDelay.state' and therefore cannot be computed from it, so this start value cannot be used to initialize the variable (see Modelica Specification section 4.9.6). This is possibly a modeling error; if unintended, give 'GEN2.sT5B.TransducerDelay.state' a start value that does not depend on itself. Use the transformational debugger to inspect the dependency chain.
Warning: Initialization start-value cycle: the start attribute of 'GEN1.sT5B.TransducerDelay.state' depends, directly or transitively, on the variable itself. The start attribute defines the initial value of 'GEN1.sT5B.TransducerDelay.state' and therefore cannot be computed from it, so this start value cannot be used to initialize the variable (see Modelica Specification section 4.9.6). This is possibly a modeling error; if unintended, give 'GEN1.sT5B.TransducerDelay.state' a start value that does not depend on itself. Use the transformational debugger to inspect the dependency chain.
Notification: Performance of matching and sorting (n=1115) (initialization): time 0.0157/0.8562, allocations: 8.47 MB / 0.5394 GB, free: 129.5 MB / 0.4949 GB
Notification: Performance of prepare postOptimizeDAE: time 5.836e-05/0.8563, allocations: 94.8 kB / 0.5395 GB, free: 129.4 MB / 0.4949 GB
Notification: Performance of postOpt simplifyComplexFunction (initialization): time 2.358e-05/0.8563, allocations: 8.281 kB / 0.5395 GB, free: 129.4 MB / 0.4949 GB
Notification: Performance of postOpt tearingSystem (initialization): time 0.01607/0.8724, allocations: 10.79 MB / 0.55 GB, free: 125.9 MB / 0.4949 GB
Notification: Performance of postOpt solveSimpleEquations (initialization): time 0.008072/0.8805, allocations: 2.441 MB / 0.5524 GB, free: 124.2 MB / 0.4949 GB
Notification: Performance of postOpt calculateStrongComponentJacobians (initialization): time 0.02312/0.9036, allocations: 21.01 MB / 0.5729 GB, free: 105.6 MB / 0.4949 GB
Notification: Performance of postOpt simplifyAllExpressions (initialization): time 0.0098/0.9134, allocations: 1.045 MB / 0.5739 GB, free: 105.2 MB / 0.4949 GB
Notification: Performance of postOpt collapseArrayExpressions (initialization): time 0.002102/0.9155, allocations: 210.1 kB / 0.5741 GB, free: 105 MB / 0.4949 GB
Notification: Performance of preBalanceInitialSystem (initialization_lambda0): time 0.007775/0.9233, allocations: 1.861 MB / 0.5759 GB, free: 103.6 MB / 0.4949 GB
Notification: Performance of partitionIndependentBlocks (initialization_lambda0): time 0.006363/0.9296, allocations: 3.455 MB / 0.5793 GB, free: 100.4 MB / 0.4949 GB
Notification: Performance of analyzeInitialSystem (initialization_lambda0): time 0.007869/0.9375, allocations: 4.646 MB / 0.5839 GB, free: 96.85 MB / 0.4949 GB
Notification: Performance of solveInitialSystemEqSystem (initialization_lambda0): time 2.182e-05/0.9375, allocations: 4 kB / 0.5839 GB, free: 96.85 MB / 0.4949 GB
Warning: Initialization start-value cycle: the start attribute of 'GEN1.sT5B.TransducerDelay.y' depends, directly or transitively, on the variable itself. The start attribute defines the initial value of 'GEN1.sT5B.TransducerDelay.y' and therefore cannot be computed from it, so this start value cannot be used to initialize the variable (see Modelica Specification section 4.9.6). This is possibly a modeling error; if unintended, give 'GEN1.sT5B.TransducerDelay.y' a start value that does not depend on itself. Use the transformational debugger to inspect the dependency chain.
Warning: Initialization start-value cycle: the start attribute of 'GEN1.sT5B.imLimitedLeadLag2.integrator.y' depends, directly or transitively, on the variable itself. The start attribute defines the initial value of 'GEN1.sT5B.imLimitedLeadLag2.integrator.y' and therefore cannot be computed from it, so this start value cannot be used to initialize the variable (see Modelica Specification section 4.9.6). This is possibly a modeling error; if unintended, give 'GEN1.sT5B.imLimitedLeadLag2.integrator.y' a start value that does not depend on itself. Use the transformational debugger to inspect the dependency chain.
Warning: Initialization start-value cycle: the start attribute of 'GEN1.sT5B.imLimitedLeadLag.integrator.y' depends, directly or transitively, on the variable itself. The start attribute defines the initial value of 'GEN1.sT5B.imLimitedLeadLag.integrator.y' and therefore cannot be computed from it, so this start value cannot be used to initialize the variable (see Modelica Specification section 4.9.6). This is possibly a modeling error; if unintended, give 'GEN1.sT5B.imLimitedLeadLag.integrator.y' a start value that does not depend on itself. Use the transformational debugger to inspect the dependency chain.
Warning: Initialization start-value cycle: the start attribute of 'GEN3.sT5B.imLimitedLeadLag2.integrator.y' depends, directly or transitively, on the variable itself. The start attribute defines the initial value of 'GEN3.sT5B.imLimitedLeadLag2.integrator.y' and therefore cannot be computed from it, so this start value cannot be used to initialize the variable (see Modelica Specification section 4.9.6). This is possibly a modeling error; if unintended, give 'GEN3.sT5B.imLimitedLeadLag2.integrator.y' a start value that does not depend on itself. Use the transformational debugger to inspect the dependency chain.
Warning: Initialization start-value cycle: the start attribute of 'GEN3.sT5B.imLimitedLeadLag.integrator.y' depends, directly or transitively, on the variable itself. The start attribute defines the initial value of 'GEN3.sT5B.imLimitedLeadLag.integrator.y' and therefore cannot be computed from it, so this start value cannot be used to initialize the variable (see Modelica Specification section 4.9.6). This is possibly a modeling error; if unintended, give 'GEN3.sT5B.imLimitedLeadLag.integrator.y' a start value that does not depend on itself. Use the transformational debugger to inspect the dependency chain.
Warning: Initialization start-value cycle: the start attribute of 'GEN3.sT5B.TransducerDelay.y' depends, directly or transitively, on the variable itself. The start attribute defines the initial value of 'GEN3.sT5B.TransducerDelay.y' and therefore cannot be computed from it, so this start value cannot be used to initialize the variable (see Modelica Specification section 4.9.6). This is possibly a modeling error; if unintended, give 'GEN3.sT5B.TransducerDelay.y' a start value that does not depend on itself. Use the transformational debugger to inspect the dependency chain.
Warning: Initialization start-value cycle: the start attribute of 'GEN3.sT5B.TransducerDelay.state' depends, directly or transitively, on the variable itself. The start attribute defines the initial value of 'GEN3.sT5B.TransducerDelay.state' and therefore cannot be computed from it, so this start value cannot be used to initialize the variable (see Modelica Specification section 4.9.6). This is possibly a modeling error; if unintended, give 'GEN3.sT5B.TransducerDelay.state' a start value that does not depend on itself. Use the transformational debugger to inspect the dependency chain.
Warning: Initialization start-value cycle: the start attribute of 'GEN2.sT5B.imLimitedLeadLag.integrator.y' depends, directly or transitively, on the variable itself. The start attribute defines the initial value of 'GEN2.sT5B.imLimitedLeadLag.integrator.y' and therefore cannot be computed from it, so this start value cannot be used to initialize the variable (see Modelica Specification section 4.9.6). This is possibly a modeling error; if unintended, give 'GEN2.sT5B.imLimitedLeadLag.integrator.y' a start value that does not depend on itself. Use the transformational debugger to inspect the dependency chain.
Warning: Initialization start-value cycle: the start attribute of 'GEN2.sT5B.imLimitedLeadLag2.integrator.y' depends, directly or transitively, on the variable itself. The start attribute defines the initial value of 'GEN2.sT5B.imLimitedLeadLag2.integrator.y' and therefore cannot be computed from it, so this start value cannot be used to initialize the variable (see Modelica Specification section 4.9.6). This is possibly a modeling error; if unintended, give 'GEN2.sT5B.imLimitedLeadLag2.integrator.y' a start value that does not depend on itself. Use the transformational debugger to inspect the dependency chain.
Warning: Initialization start-value cycle: the start attribute of 'GEN2.sT5B.TransducerDelay.y' depends, directly or transitively, on the variable itself. The start attribute defines the initial value of 'GEN2.sT5B.TransducerDelay.y' and therefore cannot be computed from it, so this start value cannot be used to initialize the variable (see Modelica Specification section 4.9.6). This is possibly a modeling error; if unintended, give 'GEN2.sT5B.TransducerDelay.y' a start value that does not depend on itself. Use the transformational debugger to inspect the dependency chain.
Warning: Initialization start-value cycle: the start attribute of 'GEN2.sT5B.TransducerDelay.state' depends, directly or transitively, on the variable itself. The start attribute defines the initial value of 'GEN2.sT5B.TransducerDelay.state' and therefore cannot be computed from it, so this start value cannot be used to initialize the variable (see Modelica Specification section 4.9.6). This is possibly a modeling error; if unintended, give 'GEN2.sT5B.TransducerDelay.state' a start value that does not depend on itself. Use the transformational debugger to inspect the dependency chain.
Warning: Initialization start-value cycle: the start attribute of 'GEN1.sT5B.TransducerDelay.state' depends, directly or transitively, on the variable itself. The start attribute defines the initial value of 'GEN1.sT5B.TransducerDelay.state' and therefore cannot be computed from it, so this start value cannot be used to initialize the variable (see Modelica Specification section 4.9.6). This is possibly a modeling error; if unintended, give 'GEN1.sT5B.TransducerDelay.state' a start value that does not depend on itself. Use the transformational debugger to inspect the dependency chain.
Notification: Performance of matching and sorting (n=1115) (initialization_lambda0): time 0.01215/0.9497, allocations: 7.9 MB / 0.5916 GB, free: 90.65 MB / 0.4949 GB
Notification: Performance of prepare postOptimizeDAE: time 5.168e-05/0.9497, allocations: 95.8 kB / 0.5917 GB, free: 90.54 MB / 0.4949 GB
Notification: Performance of postOpt simplifyComplexFunction (initialization): time 3.012e-05/0.9497, allocations: 12.12 kB / 0.5917 GB, free: 90.53 MB / 0.4949 GB
Notification: Performance of postOpt tearingSystem (initialization): time 0.01834/0.9681, allocations: 9.896 MB / 0.6013 GB, free: 81.4 MB / 0.4949 GB
Notification: Performance of postOpt solveSimpleEquations (initialization): time 0.006466/0.9746, allocations: 2.423 MB / 0.6037 GB, free: 79.14 MB / 0.4949 GB
Notification: Performance of postOpt calculateStrongComponentJacobians (initialization): time 0.01349/0.988, allocations: 20.07 MB / 0.6233 GB, free: 59.35 MB / 0.4949 GB
Notification: Performance of postOpt simplifyAllExpressions (initialization): time 0.005833/0.9939, allocations: 0.9196 MB / 0.6242 GB, free: 58.72 MB / 0.4949 GB
Notification: Performance of postOpt collapseArrayExpressions (initialization): time 0.0005534/0.9944, allocations: 214.7 kB / 0.6244 GB, free: 58.52 MB / 0.4949 GB
Notification: Model statistics after passing the back-end for initialization:
 * Number of independent subsystems: 43
 * Number of states: 0 ()
 * Number of discrete variables: 21 (GEN1.sT5B.imLimitedLeadLag.integrator.local_reset,GEN1.sT5B.imLimitedLeadLag2.integrator.local_reset,GEN1.sT5B.imLimitedLeadLag1.integrator.local_reset,GEN1.sT5B.imLimitedLeadLag3.integrator.local_reset,GEN1.sT5B.imLimitedLeadLag4.integrator.local_reset,GEN1.sT5B.imLimitedLeadLag5.integrator.local_reset,GEN2.sT5B.imLimitedLeadLag.integrator.local_reset,GEN2.sT5B.imLimitedLeadLag2.integrator.local_reset,GEN2.sT5B.imLimitedLeadLag1.integrator.local_reset,GEN2.sT5B.imLimitedLeadLag3.integrator.local_reset,GEN2.sT5B.imLimitedLeadLag4.integrator.local_reset,GEN2.sT5B.imLimitedLeadLag5.integrator.local_reset,GEN3.sT5B.imLimitedLeadLag.integrator.local_reset,GEN3.sT5B.imLimitedLeadLag2.integrator.local_reset,GEN3.sT5B.imLimitedLeadLag1.integrator.local_reset,GEN3.sT5B.imLimitedLeadLag3.integrator.local_reset,GEN3.sT5B.imLimitedLeadLag4.integrator.local_reset,GEN3.sT5B.imLimitedLeadLag5.integrator.local_reset,$whenCondition1,$whenCondition2,$whenCondition3)
 * Number of discrete states: 0 ()
 * Number of clocked states: 0 ()
 * Top-level inputs: 0
Notification: Strong component statistics for initialization (766):
 * Single equations (assignments): 750
 * Array equations: 0
 * Algorithm blocks: 3
 * Record equations: 0
 * When equations: 0
 * If-equations: 0
 * Equation systems (not torn): 0
 * Torn equation systems: 13
 * Mixed (continuous/discrete) equation systems: 0
Notification: Torn system details for strict tearing set:
 * Linear torn systems (#iteration vars, #inner vars, density): 0 systems
 * Non-linear torn systems (#iteration vars, #inner vars): 13 systems
   {(1,4), (1,4), (1,4), (1,4), (1,4), (1,4), (1,4), (1,4), (1,4), (1,4), (1,4), (1,4), (115,175)}
Notification: Performance of prepare postOptimizeDAE: time 0.001335/0.9958, allocations: 0.5686 MB / 0.625 GB, free: 58.02 MB / 0.4949 GB
Notification: Performance of postOpt lateInlineFunction (simulation): time 0.00128/0.997, allocations: 0.6868 MB / 0.6256 GB, free: 57.33 MB / 0.4949 GB
Notification: Performance of postOpt wrapFunctionCalls (simulation): time 0.02036/1.017, allocations: 9.372 MB / 0.6348 GB, free: 48.02 MB / 0.4949 GB
Notification: Performance of postOpt inlineArrayEqn (simulation): time 3.633e-05/1.017, allocations: 60 kB / 0.6348 GB, free: 47.96 MB / 0.4949 GB
Notification: Performance of postOpt constantLinearSystem (simulation): time 7.774e-06/1.017, allocations: 8 kB / 0.6349 GB, free: 47.96 MB / 0.4949 GB
Notification: Performance of postOpt simplifysemiLinear (simulation): time 9.979e-05/1.018, allocations: 27.89 kB / 0.6349 GB, free: 47.93 MB / 0.4949 GB
Warning: The model contains alias variables with redundant start and/or conflicting nominal values. It is recommended to resolve the conflicts, because otherwise the system could be hard to solve. To print the conflicting alias sets and the chosen candidates please use -d=aliasConflicts.
Notification: Performance of postOpt removeSimpleEquations (simulation): time 0.02687/1.044, allocations: 15.09 MB / 0.6496 GB, free: 33.99 MB / 0.4949 GB
Notification: Performance of postOpt simplifyComplexFunction (simulation): time 2.209e-05/1.044, allocations: 0 / 0.6496 GB, free: 33.99 MB / 0.4949 GB
Notification: Performance of postOpt solveSimpleEquations (simulation): time 0.003631/1.048, allocations: 1.197 MB / 0.6508 GB, free: 32.84 MB / 0.4949 GB
Notification: Performance of postOpt tearingSystem (simulation): time 0.0149/1.063, allocations: 7.424 MB / 0.658 GB, free: 25.45 MB / 0.4949 GB
Notification: Performance of postOpt inputDerivativesUsed (simulation): time 0.001019/1.064, allocations: 163.9 kB / 0.6582 GB, free: 25.29 MB / 0.4949 GB
Notification: Performance of postOpt calculateStrongComponentJacobians (simulation): time 0.01937/1.083, allocations: 11.7 MB / 0.6696 GB, free: 13.89 MB / 0.4949 GB
Notification: Performance of postOpt calculateStateSetsJacobians (simulation): time 3.467e-06/1.083, allocations: 0 / 0.6696 GB, free: 13.89 MB / 0.4949 GB
Notification: Performance of postOpt symbolicJacobian (simulation): time 0.02438/1.108, allocations: 10.87 MB / 0.6802 GB, free: 3.105 MB / 0.4949 GB
Notification: Performance of postOpt removeConstants (simulation): time 0.002286/1.11, allocations: 0.8986 MB / 0.6811 GB, free: 2.285 MB / 0.4949 GB
Notification: Performance of postOpt simplifyTimeIndepFuncCalls (simulation): time 0.001216/1.111, allocations: 151.9 kB / 0.6813 GB, free: 2.137 MB / 0.4949 GB
Notification: Performance of postOpt simplifyAllExpressions (simulation): time 0.00408/1.115, allocations: 0.5073 MB / 0.6817 GB, free: 1.629 MB / 0.4949 GB
Notification: Performance of postOpt findZeroCrossings (simulation): time 0.002233/1.118, allocations: 0.8514 MB / 0.6826 GB, free: 0.7773 MB / 0.4949 GB
Notification: Performance of postOpt collapseArrayExpressions (simulation): time 0.000425/1.118, allocations: 115.9 kB / 0.6827 GB, free: 0.6641 MB / 0.4949 GB
Notification: Performance of sorting global known variables: time 0.004545/1.123, allocations: 3.386 MB / 0.686 GB, free: 13.68 MB / 0.5105 GB
Notification: Performance of sort global known variables: time 2.9e-07/1.123, allocations: 0 / 0.686 GB, free: 13.68 MB / 0.5105 GB
Notification: Performance of remove unused functions: time 0.009342/1.132, allocations: 4.174 MB / 0.6901 GB, free: 9.734 MB / 0.5105 GB
Notification: Model statistics after passing the back-end for simulation:
 * Number of independent subsystems: 10
 * Number of states: 84 (GEN1.gENROU.w,GEN1.gENROU.delta,GEN1.gENROU.Epd,GEN1.gENROU.Epq,GEN1.gENROU.PSIkd,GEN1.gENROU.PSIkq,GEN1.sT5B.imLimitedLeadLag.integrator.y,GEN1.sT5B.imLimitedLeadLag2.integrator.y,GEN1.sT5B.imLimitedLeadLag1.integrator.y,GEN1.sT5B.imLimitedLeadLag3.integrator.y,GEN1.sT5B.imLimitedLeadLag4.integrator.y,GEN1.sT5B.imLimitedLeadLag5.integrator.y,GEN1.sT5B.simpleLagLimVar.state,GEN1.sT5B.TransducerDelay.state,GEN1.pSS2B.Leadlag1.TF.x_scaled[1],GEN1.pSS2B.Leadlag2.TF.x_scaled[1],GEN1.pSS2B.SimpleLag1.state,GEN1.pSS2B.SimpleLag2.state,GEN1.pSS2B.Leadlag3.TF.x_scaled[1],GEN1.pSS2B.derivativeLag.TF.x_scaled[1],GEN1.pSS2B.derivativeLag1.TF.x_scaled[1],GEN1.pSS2B.derivativeLag2.TF.x_scaled[1],GEN1.pSS2B.derivativeLag3.TF.x_scaled[1],GEN1.iEESGO.imSimpleLag.state,GEN1.iEESGO.imLeadLag.TF.x_scaled[1],GEN1.iEESGO.imSimpleLag1.state,GEN1.iEESGO.imSimpleLag2.state,GEN1.iEESGO.imSimpleLag3.state,GEN2.gENROU.w,GEN2.gENROU.delta,GEN2.gENROU.Epd,GEN2.gENROU.Epq,GEN2.gENROU.PSIkd,GEN2.gENROU.PSIkq,GEN2.sT5B.imLimitedLeadLag.integrator.y,GEN2.sT5B.imLimitedLeadLag2.integrator.y,GEN2.sT5B.imLimitedLeadLag1.integrator.y,GEN2.sT5B.imLimitedLeadLag3.integrator.y,GEN2.sT5B.imLimitedLeadLag4.integrator.y,GEN2.sT5B.imLimitedLeadLag5.integrator.y,GEN2.sT5B.simpleLagLimVar.state,GEN2.sT5B.TransducerDelay.state,GEN2.pSS2B.Leadlag1.TF.x_scaled[1],GEN2.pSS2B.Leadlag2.TF.x_scaled[1],GEN2.pSS2B.SimpleLag1.state,GEN2.pSS2B.SimpleLag2.state,GEN2.pSS2B.Leadlag3.TF.x_scaled[1],GEN2.pSS2B.derivativeLag.TF.x_scaled[1],GEN2.pSS2B.derivativeLag1.TF.x_scaled[1],GEN2.pSS2B.derivativeLag2.TF.x_scaled[1],GEN2.pSS2B.derivativeLag3.TF.x_scaled[1],GEN2.iEESGO.imSimpleLag.state,GEN2.iEESGO.imLeadLag.TF.x_scaled[1],GEN2.iEESGO.imSimpleLag1.state,GEN2.iEESGO.imSimpleLag2.state,GEN2.iEESGO.imSimpleLag3.state,GEN3.gENROU.w,GEN3.gENROU.delta,GEN3.gENROU.Epd,GEN3.gENROU.Epq,GEN3.gENROU.PSIkd,GEN3.gENROU.PSIkq,GEN3.sT5B.imLimitedLeadLag.integrator.y,GEN3.sT5B.imLimitedLeadLag2.integrator.y,GEN3.sT5B.imLimitedLeadLag1.integrator.y,GEN3.sT5B.imLimitedLeadLag3.integrator.y,GEN3.sT5B.imLimitedLeadLag4.integrator.y,GEN3.sT5B.imLimitedLeadLag5.integrator.y,GEN3.sT5B.simpleLagLimVar.state,GEN3.sT5B.TransducerDelay.state,GEN3.pSS2B.Leadlag1.TF.x_scaled[1],GEN3.pSS2B.Leadlag2.TF.x_scaled[1],GEN3.pSS2B.SimpleLag1.state,GEN3.pSS2B.SimpleLag2.state,GEN3.pSS2B.Leadlag3.TF.x_scaled[1],GEN3.pSS2B.derivativeLag.TF.x_scaled[1],GEN3.pSS2B.derivativeLag1.TF.x_scaled[1],GEN3.pSS2B.derivativeLag2.TF.x_scaled[1],GEN3.pSS2B.derivativeLag3.TF.x_scaled[1],GEN3.iEESGO.imSimpleLag.state,GEN3.iEESGO.imLeadLag.TF.x_scaled[1],GEN3.iEESGO.imSimpleLag1.state,GEN3.iEESGO.imSimpleLag2.state,GEN3.iEESGO.imSimpleLag3.state)
 * Number of discrete variables: 3 ($whenCondition3,$whenCondition2,$whenCondition1)
 * Number of discrete states: 0 ()
 * Number of clocked states: 0 ()
 * Top-level inputs: 0
Notification: Strong component statistics for simulation (477):
 * Single equations (assignments): 476
 * Array equations: 0
 * Algorithm blocks: 0
 * Record equations: 0
 * When equations: 0
 * If-equations: 0
 * Equation systems (not torn): 0
 * Torn equation systems: 1
 * Mixed (continuous/discrete) equation systems: 0
Notification: Torn system details for strict tearing set:
 * Linear torn systems (#iteration vars, #inner vars, density): 0 systems
 * Non-linear torn systems (#iteration vars, #inner vars): 1 system
   {(70,70)}
Notification: Performance of Backend phase and start with SimCode phase: time 0.02429/1.156, allocations: 11.53 MB / 0.7013 GB, free: 14.31 MB / 0.5262 GB
Notification: Performance of simCode: created initialization part: time 0.1714/1.328, allocations: 14.88 MB / 0.7159 GB, free: 150.4 MB / 0.5262 GB
Notification: Performance of simCode: created event and clocks part: time 0.0001149/1.328, allocations: 83.19 kB / 0.7159 GB, free: 150.4 MB / 0.5262 GB
Notification: Performance of simCode: created simulation system equations: time 0.008997/1.337, allocations: 3.774 MB / 0.7196 GB, free: 150 MB / 0.5262 GB
Notification: Performance of simCode: created of all other equations (e.g. parameter, nominal, assert, etc): time 0.005711/1.342, allocations: 1.365 MB / 0.721 GB, free: 150 MB / 0.5262 GB
Warning: Initialization start-value cycle: the start attribute of 'GEN1.sT5B.imLimitedLeadLag.integrator.y' depends, directly or transitively, on the variable itself. The start attribute defines the initial value of 'GEN1.sT5B.imLimitedLeadLag.integrator.y' and therefore cannot be computed from it, so this start value cannot be used to initialize the variable (see Modelica Specification section 4.9.6). This is possibly a modeling error; if unintended, give 'GEN1.sT5B.imLimitedLeadLag.integrator.y' a start value that does not depend on itself. Use the transformational debugger to inspect the dependency chain.
Warning: Initialization start-value cycle: the start attribute of 'GEN1.sT5B.imLimitedLeadLag2.integrator.y' depends, directly or transitively, on the variable itself. The start attribute defines the initial value of 'GEN1.sT5B.imLimitedLeadLag2.integrator.y' and therefore cannot be computed from it, so this start value cannot be used to initialize the variable (see Modelica Specification section 4.9.6). This is possibly a modeling error; if unintended, give 'GEN1.sT5B.imLimitedLeadLag2.integrator.y' a start value that does not depend on itself. Use the transformational debugger to inspect the dependency chain.
Warning: Initialization start-value cycle: the start attribute of 'GEN1.sT5B.TransducerDelay.y' depends, directly or transitively, on the variable itself. The start attribute defines the initial value of 'GEN1.sT5B.TransducerDelay.y' and therefore cannot be computed from it, so this start value cannot be used to initialize the variable (see Modelica Specification section 4.9.6). This is possibly a modeling error; if unintended, give 'GEN1.sT5B.TransducerDelay.y' a start value that does not depend on itself. Use the transformational debugger to inspect the dependency chain.
Warning: Initialization start-value cycle: the start attribute of 'GEN1.sT5B.TransducerDelay.state' depends, directly or transitively, on the variable itself. The start attribute defines the initial value of 'GEN1.sT5B.TransducerDelay.state' and therefore cannot be computed from it, so this start value cannot be used to initialize the variable (see Modelica Specification section 4.9.6). This is possibly a modeling error; if unintended, give 'GEN1.sT5B.TransducerDelay.state' a start value that does not depend on itself. Use the transformational debugger to inspect the dependency chain.
Warning: Initialization start-value cycle: the start attribute of 'GEN3.sT5B.imLimitedLeadLag.integrator.y' depends, directly or transitively, on the variable itself. The start attribute defines the initial value of 'GEN3.sT5B.imLimitedLeadLag.integrator.y' and therefore cannot be computed from it, so this start value cannot be used to initialize the variable (see Modelica Specification section 4.9.6). This is possibly a modeling error; if unintended, give 'GEN3.sT5B.imLimitedLeadLag.integrator.y' a start value that does not depend on itself. Use the transformational debugger to inspect the dependency chain.
Warning: Initialization start-value cycle: the start attribute of 'GEN3.sT5B.imLimitedLeadLag2.integrator.y' depends, directly or transitively, on the variable itself. The start attribute defines the initial value of 'GEN3.sT5B.imLimitedLeadLag2.integrator.y' and therefore cannot be computed from it, so this start value cannot be used to initialize the variable (see Modelica Specification section 4.9.6). This is possibly a modeling error; if unintended, give 'GEN3.sT5B.imLimitedLeadLag2.integrator.y' a start value that does not depend on itself. Use the transformational debugger to inspect the dependency chain.
Warning: Initialization start-value cycle: the start attribute of 'GEN3.sT5B.TransducerDelay.y' depends, directly or transitively, on the variable itself. The start attribute defines the initial value of 'GEN3.sT5B.TransducerDelay.y' and therefore cannot be computed from it, so this start value cannot be used to initialize the variable (see Modelica Specification section 4.9.6). This is possibly a modeling error; if unintended, give 'GEN3.sT5B.TransducerDelay.y' a start value that does not depend on itself. Use the transformational debugger to inspect the dependency chain.
Warning: Initialization start-value cycle: the start attribute of 'GEN3.sT5B.TransducerDelay.state' depends, directly or transitively, on the variable itself. The start attribute defines the initial value of 'GEN3.sT5B.TransducerDelay.state' and therefore cannot be computed from it, so this start value cannot be used to initialize the variable (see Modelica Specification section 4.9.6). This is possibly a modeling error; if unintended, give 'GEN3.sT5B.TransducerDelay.state' a start value that does not depend on itself. Use the transformational debugger to inspect the dependency chain.
Warning: Initialization start-value cycle: the start attribute of 'GEN2.sT5B.imLimitedLeadLag.integrator.y' depends, directly or transitively, on the variable itself. The start attribute defines the initial value of 'GEN2.sT5B.imLimitedLeadLag.integrator.y' and therefore cannot be computed from it, so this start value cannot be used to initialize the variable (see Modelica Specification section 4.9.6). This is possibly a modeling error; if unintended, give 'GEN2.sT5B.imLimitedLeadLag.integrator.y' a start value that does not depend on itself. Use the transformational debugger to inspect the dependency chain.
Warning: Initialization start-value cycle: the start attribute of 'GEN2.sT5B.imLimitedLeadLag2.integrator.y' depends, directly or transitively, on the variable itself. The start attribute defines the initial value of 'GEN2.sT5B.imLimitedLeadLag2.integrator.y' and therefore cannot be computed from it, so this start value cannot be used to initialize the variable (see Modelica Specification section 4.9.6). This is possibly a modeling error; if unintended, give 'GEN2.sT5B.imLimitedLeadLag2.integrator.y' a start value that does not depend on itself. Use the transformational debugger to inspect the dependency chain.
Warning: Initialization start-value cycle: the start attribute of 'GEN2.sT5B.TransducerDelay.y' depends, directly or transitively, on the variable itself. The start attribute defines the initial value of 'GEN2.sT5B.TransducerDelay.y' and therefore cannot be computed from it, so this start value cannot be used to initialize the variable (see Modelica Specification section 4.9.6). This is possibly a modeling error; if unintended, give 'GEN2.sT5B.TransducerDelay.y' a start value that does not depend on itself. Use the transformational debugger to inspect the dependency chain.
Warning: Initialization start-value cycle: the start attribute of 'GEN2.sT5B.TransducerDelay.state' depends, directly or transitively, on the variable itself. The start attribute defines the initial value of 'GEN2.sT5B.TransducerDelay.state' and therefore cannot be computed from it, so this start value cannot be used to initialize the variable (see Modelica Specification section 4.9.6). This is possibly a modeling error; if unintended, give 'GEN2.sT5B.TransducerDelay.state' a start value that does not depend on itself. Use the transformational debugger to inspect the dependency chain.
Notification: Performance of simCode: created linear, non-linear and system jacobian parts: time 0.08906/1.431, allocations: 57.91 MB / 0.7775 GB, free: 123.2 MB / 0.5262 GB
Notification: Performance of simCode: some other stuff during SimCode phase: time 0.001936/1.433, allocations: 1.607 MB / 0.7791 GB, free: 122.1 MB / 0.5262 GB
Notification: Performance of simCode: alias equations: time 0.004363/1.438, allocations: 0.9479 MB / 0.78 GB, free: 121.5 MB / 0.5262 GB
Notification: Performance of simCode: all other stuff during SimCode phase: time 0.006872/1.445, allocations: 5.053 MB / 0.7849 GB, free: 120.4 MB / 0.5262 GB
Notification: Performance of SimCode: time 1.904e-06/1.445, allocations: 0 / 0.7849 GB, free: 120.4 MB / 0.5262 GB
Notification: Performance of FMU documentation: time 0.4963/1.941, allocations: 336.9 MB / 1.114 GB, free: 3.363 MB / 0.5574 GB
Notification: FMU-only work: backend 0.02359, simCode 0.06173, templates 0
Notification: Performance of buildModelFMU: Generate the FMI files: time 0.2516/2.193, allocations: 1.367 MB / 1.115 GB, free: 175 MB / 0.5574 GB
Notification: Building FMU for platform 'static' (1/1).
Notification: Finished FMU for platform 'static' (1/1).
Notification: Performance of buildModelFMU: Generate platform static: time 7.4/9.592, allocations: 10.81 kB / 1.115 GB, free: 175 MB / 0.5574 GB
"
[Timeout remaining time 650]
(rm -f OpenIPSL_2.0.0_OpenIPSL.Examples.SevenBus.Network.pipe ; mkfifo OpenIPSL_2.0.0_OpenIPSL.Examples.SevenBus.Network.pipe ; head -c 1048576 < OpenIPSL_2.0.0_OpenIPSL.Examples.SevenBus.Network.pipe >> ../files/OpenIPSL_2.0.0_OpenIPSL.Examples.SevenBus.Network.sim & (cd run_OMSimulator && /home/hudson/saved_omc/OMSimulator/install/bin/OMSimulator  --stripRoot --tempDir=temp_OpenIPSL_2_0_0_OpenIPSL_Examples_SevenBus_Network_fmu --startTime=0 --stopTime=10 --stepSize=0.004 --mode=me --timeout=240 --tolerance=1e-06 ../OpenIPSL_2_0_0_OpenIPSL_Examples_SevenBus_Network.fmu) > OpenIPSL_2.0.0_OpenIPSL.Examples.SevenBus.Network.pipe 2>&1) [Timeout 252.0]
(rm -f OpenIPSL_2.0.0_OpenIPSL.Examples.SevenBus.Network_OMSimulator-cs-cvode.pipe ; mkfifo OpenIPSL_2.0.0_OpenIPSL.Examples.SevenBus.Network_OMSimulator-cs-cvode.pipe ; head -c 1048576 < OpenIPSL_2.0.0_OpenIPSL.Examples.SevenBus.Network_OMSimulator-cs-cvode.pipe >> /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/files/OpenIPSL_2.0.0_OpenIPSL.Examples.SevenBus.Network_OMSimulator-cs-cvode.sim & (cd run_OMSimulator-cs-cvode && /home/hudson/saved_omc/OMSimulator/install/bin/OMSimulator  --stripRoot --tempDir=temp_OpenIPSL_2_0_0_OpenIPSL_Examples_SevenBus_Network_OMSimulator-cs-cvode_fmu --startTime=0 --stopTime=10 --stepSize=0.004 --mode=cs --timeout=240 --tolerance=1e-06 ../OpenIPSL_2_0_0_OpenIPSL_Examples_SevenBus_Network_OMSimulator-cs-cvode.fmu) > OpenIPSL_2.0.0_OpenIPSL.Examples.SevenBus.Network_OMSimulator-cs-cvode.pipe 2>&1) [Timeout 252.0]
(rm -f OpenIPSL_2.0.0_OpenIPSL.Examples.SevenBus.Network_OMSimulator-cs-euler.pipe ; mkfifo OpenIPSL_2.0.0_OpenIPSL.Examples.SevenBus.Network_OMSimulator-cs-euler.pipe ; head -c 1048576 < OpenIPSL_2.0.0_OpenIPSL.Examples.SevenBus.Network_OMSimulator-cs-euler.pipe >> /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/files/OpenIPSL_2.0.0_OpenIPSL.Examples.SevenBus.Network_OMSimulator-cs-euler.sim & (cd run_OMSimulator-cs-euler && /home/hudson/saved_omc/OMSimulator/install/bin/OMSimulator  --stripRoot --tempDir=temp_OpenIPSL_2_0_0_OpenIPSL_Examples_SevenBus_Network_OMSimulator-cs-euler_fmu --startTime=0 --stopTime=10 --stepSize=0.004 --mode=cs --timeout=240 --tolerance=1e-06 ../OpenIPSL_2_0_0_OpenIPSL_Examples_SevenBus_Network_OMSimulator-cs-euler.fmu) > OpenIPSL_2.0.0_OpenIPSL.Examples.SevenBus.Network_OMSimulator-cs-euler.pipe 2>&1) [Timeout 252.0]
(rm -f OpenIPSL_2.0.0_OpenIPSL.Examples.SevenBus.Network_fmpy.pipe ; mkfifo OpenIPSL_2.0.0_OpenIPSL.Examples.SevenBus.Network_fmpy.pipe ; head -c 1048576 < OpenIPSL_2.0.0_OpenIPSL.Examples.SevenBus.Network_fmpy.pipe >> /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/files/OpenIPSL_2.0.0_OpenIPSL.Examples.SevenBus.Network_fmpy.sim & (cd run_fmpy && python3 -m fmpy simulate --output-file ../OpenIPSL_2.0.0_OpenIPSL.Examples.SevenBus.Network_fmpy_res.csv --start-time 0 --stop-time 10 --timeout 240 --relative-tolerance 1e-06 --interface-type ModelExchange --solver CVode --output-interval 0.004 ../OpenIPSL_2_0_0_OpenIPSL_Examples_SevenBus_Network.fmu) > OpenIPSL_2.0.0_OpenIPSL.Examples.SevenBus.Network_fmpy.pipe 2>&1) [Timeout 252.0]
(rm -f OpenIPSL_2.0.0_OpenIPSL.Examples.SevenBus.Network_fmpy-fmi3-cs-cvode.pipe ; mkfifo OpenIPSL_2.0.0_OpenIPSL.Examples.SevenBus.Network_fmpy-fmi3-cs-cvode.pipe ; head -c 1048576 < OpenIPSL_2.0.0_OpenIPSL.Examples.SevenBus.Network_fmpy-fmi3-cs-cvode.pipe >> /var/lib/jenkins/ws/OpenModelicaLibraryTestingWork/OpenModelicaLibraryTesting/files/OpenIPSL_2.0.0_OpenIPSL.Examples.SevenBus.Network_fmpy-fmi3-cs-cvode.sim & (cd run_fmpy-fmi3-cs-cvode && python3 -m fmpy simulate --output-file ../OpenIPSL_2.0.0_OpenIPSL.Examples.SevenBus.Network_fmpy-fmi3-cs-cvode_res.csv --start-time 0 --stop-time 10 --timeout 240 --relative-tolerance 1e-06 --interface-type CoSimulation --output-interval 0.004 ../OpenIPSL_2_0_0_OpenIPSL_Examples_SevenBus_Network_fmpy-fmi3-cs-cvode.fmu) > OpenIPSL_2.0.0_OpenIPSL.Examples.SevenBus.Network_fmpy-fmi3-cs-cvode.pipe 2>&1) [Timeout 252.0]
[Calling sys.exit(0), Time elapsed: 28.90313809644431]