(cd run_OMSimulator-cs-euler && /home/hudson/saved_omc/OMSimulator/install/bin/OMSimulator --resultFile=../Buildings_12_Buildings.Fluid.FixedResistances.BuriedPipes.Validation.GroundCouplingAIT_OMSimulator-cs-euler_res.mat --stripRoot --tempDir=temp_Buildings_12_Buildings_Fluid_FixedResistances_BuriedPipes_Validation_GroundCouplingAIT_OMSimulator-cs-euler_fmu --startTime=0 --stopTime=603900 --stepSize=900 --mode=cs --timeout=240 --tolerance=1e-06 ../Buildings_12_Buildings_Fluid_FixedResistances_BuriedPipes_Validation_GroundCouplingAIT_OMSimulator-cs-euler.fmu) info: *** FMU Simulation Info *** - model : Buildings.Fluid.FixedResistances.BuriedPipes.Validation.GroundCouplingAIT (co-simulation) - fmiVersion: 2.0 - startTime : 0.000000 - stopTime : 603900.000000 - tolerance : 1e-06 - stepSize : 900 LOG_STDOUT | info | ... loading "dat" from "/tmp/tmpeqaofw20/GroundCouplingAIT-rdrvmoyn/temp/0001_GroundCouplingAIT/resources/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Resources/Data/Fluid/FixedResistances/Validation/PlugFlowPipes/PipeDataAIT151218.mos" info: Result file: ../Buildings_12_Buildings.Fluid.FixedResistances.BuriedPipes.Validation.GroundCouplingAIT_OMSimulator-cs-euler_res.mat (bufferSize=10) info: Parameter GroundCouplingAIT.DataReader.delimiter will not be stored in the result file, because the signal type is not supported info: Parameter GroundCouplingAIT.DataReader.fileName will not be stored in the result file, because the signal type is not supported info: Parameter GroundCouplingAIT.DataReader.tableName will not be stored in the result file, because the signal type is not supported LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 900.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T <= 403.15)), pip0.vol_a.dynBal.medium.T=230924.6380739037) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = 230925 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 900.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T <= 403.15)), pip0.vol_a.dynBal.medium.T=230924.6380739037) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = 230925 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 900.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T <= 403.15)), pip0.vol_a.dynBal.medium.T=230924.6380739037) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = 230925 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 900.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T <= 403.15)), pip0.vol_a.dynBal.medium.T=230924.6380739037) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = 230925 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 900.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T <= 403.15)), pip0.vol_a.dynBal.medium.T=230924.6380739037) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = 230925 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | Found event, previous asserts are ignored. LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 1800.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T <= 403.15)), pip0.vol_b.dynBal.medium.T=685730064.364139) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = 6.8573e+08 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 1800.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T >= 272.15)), pip0.vol_a.dynBal.medium.T=-688344145.6019843) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = -6.88344e+08 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 1800.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T >= 272.15)), pip0.vol_a.dynBal.medium.T=-688344145.6019843) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = -6.88344e+08 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 1800.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T <= 403.15)), pip0.vol_b.dynBal.medium.T=685730064.364139) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = 6.8573e+08 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 1800.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T >= 272.15)), pip0.vol_a.dynBal.medium.T=-688344145.6019843) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = -6.88344e+08 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 1800.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T <= 403.15)), pip0.vol_b.dynBal.medium.T=685730064.364139) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = 6.8573e+08 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 1800.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T >= 272.15)), pip0.vol_a.dynBal.medium.T=-688344145.6019843) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = -6.88344e+08 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 1800.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T <= 403.15)), pip0.vol_b.dynBal.medium.T=685730064.364139) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = 6.8573e+08 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 1800.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T >= 272.15)), pip0.vol_a.dynBal.medium.T=-688344145.6019843) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = -6.88344e+08 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 1800.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T <= 403.15)), pip0.vol_b.dynBal.medium.T=685730064.364139) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = 6.8573e+08 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | Found event, previous asserts are ignored. LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 2700.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T <= 403.15)), pip1.vol_a.dynBal.medium.T=1720095994.952159) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = 1.7201e+09 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 2700.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T >= 272.15)), pip0.vol_b.dynBal.medium.T=-3519949147795.823) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = -3.51995e+12 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 2700.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T <= 403.15)), pip0.vol_a.dynBal.medium.T=1766843474169.017) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = 1.76684e+12 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 2700.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T >= 272.15)), splPip2.vol.dynBal.medium.T=245.8538399822538) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = 245.854 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 2700.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T >= 272.15)), splPip2.vol.dynBal.medium.T=245.8538399822538) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = 245.854 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 2700.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T <= 403.15)), pip0.vol_a.dynBal.medium.T=1766843474169.017) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = 1.76684e+12 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 2700.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T >= 272.15)), pip0.vol_b.dynBal.medium.T=-3519949147795.823) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = -3.51995e+12 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 2700.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T <= 403.15)), pip1.vol_a.dynBal.medium.T=1720095994.952159) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = 1.7201e+09 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 2700.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T >= 272.15)), splPip2.vol.dynBal.medium.T=245.8538399822538) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = 245.854 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 2700.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T <= 403.15)), pip0.vol_a.dynBal.medium.T=1766843474169.017) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = 1.76684e+12 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 2700.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T >= 272.15)), pip0.vol_b.dynBal.medium.T=-3519949147795.823) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = -3.51995e+12 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 2700.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T <= 403.15)), pip1.vol_a.dynBal.medium.T=1720095994.952159) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = 1.7201e+09 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 2700.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T >= 272.15)), splPip2.vol.dynBal.medium.T=245.8538399822538) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = 245.854 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 2700.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T <= 403.15)), pip0.vol_a.dynBal.medium.T=1766843474169.017) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = 1.76684e+12 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 2700.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T >= 272.15)), pip0.vol_b.dynBal.medium.T=-3519949147795.823) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = -3.51995e+12 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 2700.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T <= 403.15)), pip1.vol_a.dynBal.medium.T=1720095994.952159) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = 1.7201e+09 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 2700.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T >= 272.15)), splPip2.vol.dynBal.medium.T=245.8538399822538) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = 245.854 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 2700.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T <= 403.15)), pip0.vol_a.dynBal.medium.T=1766843474169.017) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = 1.76684e+12 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 2700.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T >= 272.15)), pip0.vol_b.dynBal.medium.T=-3519949147795.823) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = -3.51995e+12 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 2700.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T <= 403.15)), pip1.vol_a.dynBal.medium.T=1720095994.952159) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = 1.7201e+09 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | Found event, previous asserts are ignored. LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 3600.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T >= 272.15)), pip1.vol_a.dynBal.medium.T=-9032860731923.291) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = -9.03286e+12 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 3600.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T >= 272.15)), pip4.vol_a.dynBal.medium.T=254.7962641075766) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = 254.796 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 3600.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T >= 272.15)), pip5.vol_b.dynBal.medium.T=115.2814021727611) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = 115.281 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 3600.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T >= 272.15)), pip5.vol_a.dynBal.medium.T=70.03760766043607) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = 70.0376 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 3600.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T >= 272.15)), pip2.vol_b.dynBal.medium.T=189.1966060921852) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = 189.197 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 3600.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T >= 272.15)), pip2.vol_a.dynBal.medium.T=-69.87822650888546) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = -69.8782 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 3600.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T >= 272.15)), pip3.vol_b.dynBal.medium.T=236.0451880852121) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = 236.045 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 3600.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T >= 272.15)), pip3.vol_a.dynBal.medium.T=71.51171434208322) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = 71.5117 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 3600.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T <= 403.15)), pip0.vol_b.dynBal.medium.T=1.508693533152772e+16) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = 1.50869e+16 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 3600.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T >= 272.15)), pip0.vol_a.dynBal.medium.T=-5050025985876563) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = -5.05003e+15 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 3600.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T <= 403.15)), splPip2.vol.dynBal.medium.T=2526.419360306731) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = 2526.42 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 3600.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T <= 403.15)), splPip1.vol.dynBal.medium.T=937.4653907376486) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = 937.465 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 3600.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T <= 403.15)), splPip1.vol.dynBal.medium.T=937.4653907376486) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = 937.465 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 3600.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T <= 403.15)), splPip2.vol.dynBal.medium.T=2526.419360306731) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = 2526.42 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 3600.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T >= 272.15)), pip0.vol_a.dynBal.medium.T=-5050025985876563) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = -5.05003e+15 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 3600.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T <= 403.15)), pip0.vol_b.dynBal.medium.T=1.508693533152772e+16) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = 1.50869e+16 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 3600.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T >= 272.15)), pip3.vol_a.dynBal.medium.T=71.51171434208322) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = 71.5117 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 3600.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T >= 272.15)), pip3.vol_b.dynBal.medium.T=236.0451880852121) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = 236.045 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 3600.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T >= 272.15)), pip2.vol_a.dynBal.medium.T=-69.87822650888546) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = -69.8782 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 3600.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T >= 272.15)), pip2.vol_b.dynBal.medium.T=189.1966060921852) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = 189.197 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 3600.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T >= 272.15)), pip5.vol_a.dynBal.medium.T=70.03760766043607) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = 70.0376 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 3600.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T >= 272.15)), pip5.vol_b.dynBal.medium.T=115.2814021727611) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = 115.281 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 3600.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T >= 272.15)), pip4.vol_a.dynBal.medium.T=254.7962641075766) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = 254.796 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 3600.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T >= 272.15)), pip1.vol_a.dynBal.medium.T=-9032860731923.291) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = -9.03286e+12 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 3600.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T <= 403.15)), splPip1.vol.dynBal.medium.T=937.4653907376486) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = 937.465 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 3600.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T <= 403.15)), splPip2.vol.dynBal.medium.T=2526.419360306731) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = 2526.42 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 3600.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T >= 272.15)), pip0.vol_a.dynBal.medium.T=-5050025985876563) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = -5.05003e+15 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 3600.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T <= 403.15)), pip0.vol_b.dynBal.medium.T=1.508693533152772e+16) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = 1.50869e+16 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 3600.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T >= 272.15)), pip3.vol_a.dynBal.medium.T=71.51171434208322) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = 71.5117 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 3600.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T >= 272.15)), pip3.vol_b.dynBal.medium.T=236.0451880852121) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = 236.045 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 3600.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T >= 272.15)), pip2.vol_a.dynBal.medium.T=-69.87822650888546) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = -69.8782 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 3600.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T >= 272.15)), pip2.vol_b.dynBal.medium.T=189.1966060921852) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = 189.197 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 3600.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T >= 272.15)), pip5.vol_a.dynBal.medium.T=70.03760766043607) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = 70.0376 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 3600.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T >= 272.15)), pip5.vol_b.dynBal.medium.T=115.2814021727611) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = 115.281 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 3600.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T >= 272.15)), pip4.vol_a.dynBal.medium.T=254.7962641075766) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = 254.796 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 3600.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T >= 272.15)), pip1.vol_a.dynBal.medium.T=-9032860731923.291) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = -9.03286e+12 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 3600.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T <= 403.15)), splPip1.vol.dynBal.medium.T=937.4653907376486) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = 937.465 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 3600.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T <= 403.15)), splPip2.vol.dynBal.medium.T=2526.419360306731) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = 2526.42 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 3600.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T >= 272.15)), pip0.vol_a.dynBal.medium.T=-5050025985876563) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = -5.05003e+15 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 3600.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T <= 403.15)), pip0.vol_b.dynBal.medium.T=1.508693533152772e+16) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = 1.50869e+16 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 3600.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T >= 272.15)), pip3.vol_a.dynBal.medium.T=71.51171434208322) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = 71.5117 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 3600.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T >= 272.15)), pip3.vol_b.dynBal.medium.T=236.0451880852121) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = 236.045 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 3600.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T >= 272.15)), pip2.vol_a.dynBal.medium.T=-69.87822650888546) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = -69.8782 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 3600.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T >= 272.15)), pip2.vol_b.dynBal.medium.T=189.1966060921852) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = 189.197 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 3600.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T >= 272.15)), pip5.vol_a.dynBal.medium.T=70.03760766043607) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = 70.0376 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 3600.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T >= 272.15)), pip5.vol_b.dynBal.medium.T=115.2814021727611) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = 115.281 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 3600.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T >= 272.15)), pip4.vol_a.dynBal.medium.T=254.7962641075766) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = 254.796 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 3600.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T >= 272.15)), pip1.vol_a.dynBal.medium.T=-9032860731923.291) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = -9.03286e+12 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 3600.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T <= 403.15)), splPip1.vol.dynBal.medium.T=937.4653907376486) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = 937.465 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 3600.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T <= 403.15)), splPip2.vol.dynBal.medium.T=2526.419360306731) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = 2526.42 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 3600.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T >= 272.15)), pip0.vol_a.dynBal.medium.T=-5050025985876563) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = -5.05003e+15 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 3600.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T <= 403.15)), pip0.vol_b.dynBal.medium.T=1.508693533152772e+16) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = 1.50869e+16 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 3600.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T >= 272.15)), pip3.vol_a.dynBal.medium.T=71.51171434208322) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = 71.5117 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 3600.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T >= 272.15)), pip3.vol_b.dynBal.medium.T=236.0451880852121) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = 236.045 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 3600.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T >= 272.15)), pip2.vol_a.dynBal.medium.T=-69.87822650888546) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = -69.8782 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 3600.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T >= 272.15)), pip2.vol_b.dynBal.medium.T=189.1966060921852) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = 189.197 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 3600.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T >= 272.15)), pip5.vol_a.dynBal.medium.T=70.03760766043607) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = 70.0376 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 3600.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T >= 272.15)), pip5.vol_b.dynBal.medium.T=115.2814021727611) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = 115.281 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 3600.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T >= 272.15)), pip4.vol_a.dynBal.medium.T=254.7962641075766) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = 254.796 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 3600.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T >= 272.15)), pip1.vol_a.dynBal.medium.T=-9032860731923.291) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = -9.03286e+12 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | Found event, previous asserts are ignored. LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 4500.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T <= 403.15)), pip1.vol_a.dynBal.medium.T=5.851265106107498e+16) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = 5.85127e+16 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 4500.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T <= 403.15)), pip4.vol_a.dynBal.medium.T=1844.841387044572) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = 1844.84 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 4500.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T <= 403.15)), pip5.vol_b.dynBal.medium.T=3647.537951789168) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = 3647.54 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 4500.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T <= 403.15)), pip5.vol_a.dynBal.medium.T=18363.00491462851) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = 18363 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 4500.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T >= 272.15)), pip2.vol_b.dynBal.medium.T=-646.7179401911085) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = -646.718 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 4500.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T <= 403.15)), pip2.vol_a.dynBal.medium.T=33073.9342890797) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = 33073.9 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 4500.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T <= 403.15)), pip3.vol_a.dynBal.medium.T=13955.81544139968) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = 13955.8 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 4500.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T >= 272.15)), pip0.vol_b.dynBal.medium.T=-5.639616778256793e+19) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = -5.63962e+19 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 4500.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T <= 403.15)), pip0.vol_a.dynBal.medium.T=1.415817790934058e+19) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = 1.41582e+19 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 4500.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T >= 272.15)), splPip2.vol.dynBal.medium.T=-137078.4684156502) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = -137078 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 4500.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T >= 272.15)), splPip1.vol.dynBal.medium.T=-38552.23812769073) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = -38552.2 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 4500.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T >= 272.15)), splPip1.vol.dynBal.medium.T=-38552.23812769073) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = -38552.2 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 4500.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T >= 272.15)), splPip2.vol.dynBal.medium.T=-137078.4684156502) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = -137078 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 4500.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T <= 403.15)), pip0.vol_a.dynBal.medium.T=1.415817790934058e+19) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = 1.41582e+19 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 4500.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T >= 272.15)), pip0.vol_b.dynBal.medium.T=-5.639616778256793e+19) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = -5.63962e+19 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 4500.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T <= 403.15)), pip3.vol_a.dynBal.medium.T=13955.81544139968) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = 13955.8 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 4500.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T <= 403.15)), pip2.vol_a.dynBal.medium.T=33073.9342890797) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = 33073.9 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 4500.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T >= 272.15)), pip2.vol_b.dynBal.medium.T=-646.7179401911085) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = -646.718 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 4500.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T <= 403.15)), pip5.vol_a.dynBal.medium.T=18363.00491462851) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = 18363 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 4500.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T <= 403.15)), pip5.vol_b.dynBal.medium.T=3647.537951789168) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = 3647.54 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 4500.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T <= 403.15)), pip4.vol_a.dynBal.medium.T=1844.841387044572) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = 1844.84 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 4500.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T <= 403.15)), pip1.vol_a.dynBal.medium.T=5.851265106107498e+16) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = 5.85127e+16 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 4500.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T >= 272.15)), splPip1.vol.dynBal.medium.T=-38552.23812769073) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = -38552.2 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 4500.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T >= 272.15)), splPip2.vol.dynBal.medium.T=-137078.4684156502) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = -137078 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 4500.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T <= 403.15)), pip0.vol_a.dynBal.medium.T=1.415817790934058e+19) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = 1.41582e+19 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 4500.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T >= 272.15)), pip0.vol_b.dynBal.medium.T=-5.639616778256793e+19) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = -5.63962e+19 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 4500.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T <= 403.15)), pip3.vol_a.dynBal.medium.T=13955.81544139968) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = 13955.8 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 4500.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T <= 403.15)), pip2.vol_a.dynBal.medium.T=33073.9342890797) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = 33073.9 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 4500.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T >= 272.15)), pip2.vol_b.dynBal.medium.T=-646.7179401911085) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = -646.718 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 4500.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T <= 403.15)), pip5.vol_a.dynBal.medium.T=18363.00491462851) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = 18363 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 4500.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T <= 403.15)), pip5.vol_b.dynBal.medium.T=3647.537951789168) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = 3647.54 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 4500.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T <= 403.15)), pip4.vol_a.dynBal.medium.T=1844.841387044572) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = 1844.84 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 4500.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T <= 403.15)), pip1.vol_a.dynBal.medium.T=5.851265106107498e+16) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = 5.85127e+16 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 4500.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T >= 272.15)), splPip1.vol.dynBal.medium.T=-38552.23812769073) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = -38552.2 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 4500.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T >= 272.15)), splPip2.vol.dynBal.medium.T=-137078.4684156502) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = -137078 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 4500.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T <= 403.15)), pip0.vol_a.dynBal.medium.T=1.415817790934058e+19) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = 1.41582e+19 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 4500.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T >= 272.15)), pip0.vol_b.dynBal.medium.T=-5.639616778256793e+19) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = -5.63962e+19 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 4500.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T <= 403.15)), pip3.vol_a.dynBal.medium.T=13955.81544139968) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = 13955.8 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 4500.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T <= 403.15)), pip2.vol_a.dynBal.medium.T=33073.9342890797) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = 33073.9 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 4500.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T >= 272.15)), pip2.vol_b.dynBal.medium.T=-646.7179401911085) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = -646.718 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 4500.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T <= 403.15)), pip5.vol_a.dynBal.medium.T=18363.00491462851) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = 18363 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 4500.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T <= 403.15)), pip5.vol_b.dynBal.medium.T=3647.537951789168) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = 3647.54 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 4500.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T <= 403.15)), pip4.vol_a.dynBal.medium.T=1844.841387044572) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = 1844.84 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 4500.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T <= 403.15)), pip1.vol_a.dynBal.medium.T=5.851265106107498e+16) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = 5.85127e+16 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 4500.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T >= 272.15)), splPip1.vol.dynBal.medium.T=-38552.23812769073) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = -38552.2 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 4500.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T >= 272.15)), splPip2.vol.dynBal.medium.T=-137078.4684156502) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = -137078 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 4500.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T <= 403.15)), pip0.vol_a.dynBal.medium.T=1.415817790934058e+19) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = 1.41582e+19 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 4500.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T >= 272.15)), pip0.vol_b.dynBal.medium.T=-5.639616778256793e+19) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = -5.63962e+19 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 4500.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T <= 403.15)), pip3.vol_a.dynBal.medium.T=13955.81544139968) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = 13955.8 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 4500.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T <= 403.15)), pip2.vol_a.dynBal.medium.T=33073.9342890797) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = 33073.9 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 4500.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T >= 272.15)), pip2.vol_b.dynBal.medium.T=-646.7179401911085) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = -646.718 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 4500.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T <= 403.15)), pip5.vol_a.dynBal.medium.T=18363.00491462851) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = 18363 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 4500.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T <= 403.15)), pip5.vol_b.dynBal.medium.T=3647.537951789168) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = 3647.54 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 4500.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T <= 403.15)), pip4.vol_a.dynBal.medium.T=1844.841387044572) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = 1844.84 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 4500.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T <= 403.15)), pip1.vol_a.dynBal.medium.T=5.851265106107498e+16) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = 5.85127e+16 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | Found event, previous asserts are ignored. LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 5400.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T >= 272.15)), pip1.vol_a.dynBal.medium.T=-1.587183965503291e+20) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = -1.58718e+20 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 5400.000000 | | | | ((noEvent(pip4.vol_b.dynBal.medium.T >= 272.15)), pip4.vol_b.dynBal.medium.T=259.8659701153938) --> "In GroundCouplingAIT.pip4.vol_b.dynBal.medium: Temperature T = 259.866 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 5400.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T >= 272.15)), pip4.vol_a.dynBal.medium.T=-100800.1391209163) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = -100800 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 5400.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T <= 403.15)), pip5.vol_b.dynBal.medium.T=55204.47301372194) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = 55204.5 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 5400.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T >= 272.15)), pip5.vol_a.dynBal.medium.T=-827424.0311414028) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = -827424 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 5400.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T <= 403.15)), pip2.vol_b.dynBal.medium.T=186142.5654457152) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = 186143 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 5400.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T >= 272.15)), pip2.vol_a.dynBal.medium.T=-1355440.397897538) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = -1.35544e+06 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 5400.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T <= 403.15)), pip3.vol_b.dynBal.medium.T=20889.39662475531) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = 20889.4 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 5400.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T >= 272.15)), pip3.vol_a.dynBal.medium.T=-840253.8627584907) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = -840254 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 5400.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T <= 403.15)), pip0.vol_b.dynBal.medium.T=2.168901117762075e+23) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = 2.1689e+23 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 5400.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T >= 272.15)), pip0.vol_a.dynBal.medium.T=-4.356125162595436e+22) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = -4.35613e+22 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 5400.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T <= 403.15)), splPip2.vol.dynBal.medium.T=5604542.591375874) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = 5.60454e+06 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 5400.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T <= 403.15)), splPip1.vol.dynBal.medium.T=1686200.600321512) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = 1.6862e+06 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 5400.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T <= 403.15)), splPip1.vol.dynBal.medium.T=1686200.600321512) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = 1.6862e+06 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 5400.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T <= 403.15)), splPip2.vol.dynBal.medium.T=5604542.591375874) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = 5.60454e+06 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 5400.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T >= 272.15)), pip0.vol_a.dynBal.medium.T=-4.356125162595436e+22) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = -4.35613e+22 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 5400.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T <= 403.15)), pip0.vol_b.dynBal.medium.T=2.168901117762075e+23) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = 2.1689e+23 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 5400.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T >= 272.15)), pip3.vol_a.dynBal.medium.T=-840253.8627584907) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = -840254 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 5400.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T <= 403.15)), pip3.vol_b.dynBal.medium.T=20889.39662475531) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = 20889.4 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 5400.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T >= 272.15)), pip2.vol_a.dynBal.medium.T=-1355440.397897538) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = -1.35544e+06 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 5400.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T <= 403.15)), pip2.vol_b.dynBal.medium.T=186142.5654457152) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = 186143 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 5400.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T >= 272.15)), pip5.vol_a.dynBal.medium.T=-827424.0311414028) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = -827424 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 5400.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T <= 403.15)), pip5.vol_b.dynBal.medium.T=55204.47301372194) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = 55204.5 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 5400.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T >= 272.15)), pip4.vol_a.dynBal.medium.T=-100800.1391209163) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = -100800 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 5400.000000 | | | | ((noEvent(pip4.vol_b.dynBal.medium.T >= 272.15)), pip4.vol_b.dynBal.medium.T=259.8659701153938) --> "In GroundCouplingAIT.pip4.vol_b.dynBal.medium: Temperature T = 259.866 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 5400.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T >= 272.15)), pip1.vol_a.dynBal.medium.T=-1.587183965503291e+20) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = -1.58718e+20 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 5400.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T <= 403.15)), splPip1.vol.dynBal.medium.T=1686200.600321512) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = 1.6862e+06 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 5400.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T <= 403.15)), splPip2.vol.dynBal.medium.T=5604542.591375874) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = 5.60454e+06 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 5400.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T >= 272.15)), pip0.vol_a.dynBal.medium.T=-4.356125162595436e+22) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = -4.35613e+22 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 5400.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T <= 403.15)), pip0.vol_b.dynBal.medium.T=2.168901117762075e+23) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = 2.1689e+23 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 5400.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T >= 272.15)), pip3.vol_a.dynBal.medium.T=-840253.8627584907) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = -840254 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 5400.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T <= 403.15)), pip3.vol_b.dynBal.medium.T=20889.39662475531) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = 20889.4 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 5400.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T >= 272.15)), pip2.vol_a.dynBal.medium.T=-1355440.397897538) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = -1.35544e+06 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 5400.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T <= 403.15)), pip2.vol_b.dynBal.medium.T=186142.5654457152) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = 186143 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 5400.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T >= 272.15)), pip5.vol_a.dynBal.medium.T=-827424.0311414028) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = -827424 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 5400.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T <= 403.15)), pip5.vol_b.dynBal.medium.T=55204.47301372194) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = 55204.5 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 5400.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T >= 272.15)), pip4.vol_a.dynBal.medium.T=-100800.1391209163) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = -100800 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 5400.000000 | | | | ((noEvent(pip4.vol_b.dynBal.medium.T >= 272.15)), pip4.vol_b.dynBal.medium.T=259.8659701153938) --> "In GroundCouplingAIT.pip4.vol_b.dynBal.medium: Temperature T = 259.866 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 5400.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T >= 272.15)), pip1.vol_a.dynBal.medium.T=-1.587183965503291e+20) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = -1.58718e+20 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 5400.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T <= 403.15)), splPip1.vol.dynBal.medium.T=1686200.600321512) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = 1.6862e+06 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 5400.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T <= 403.15)), splPip2.vol.dynBal.medium.T=5604542.591375874) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = 5.60454e+06 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 5400.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T >= 272.15)), pip0.vol_a.dynBal.medium.T=-4.356125162595436e+22) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = -4.35613e+22 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 5400.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T <= 403.15)), pip0.vol_b.dynBal.medium.T=2.168901117762075e+23) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = 2.1689e+23 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 5400.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T >= 272.15)), pip3.vol_a.dynBal.medium.T=-840253.8627584907) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = -840254 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 5400.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T <= 403.15)), pip3.vol_b.dynBal.medium.T=20889.39662475531) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = 20889.4 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 5400.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T >= 272.15)), pip2.vol_a.dynBal.medium.T=-1355440.397897538) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = -1.35544e+06 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 5400.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T <= 403.15)), pip2.vol_b.dynBal.medium.T=186142.5654457152) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = 186143 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 5400.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T >= 272.15)), pip5.vol_a.dynBal.medium.T=-827424.0311414028) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = -827424 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 5400.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T <= 403.15)), pip5.vol_b.dynBal.medium.T=55204.47301372194) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = 55204.5 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 5400.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T >= 272.15)), pip4.vol_a.dynBal.medium.T=-100800.1391209163) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = -100800 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 5400.000000 | | | | ((noEvent(pip4.vol_b.dynBal.medium.T >= 272.15)), pip4.vol_b.dynBal.medium.T=259.8659701153938) --> "In GroundCouplingAIT.pip4.vol_b.dynBal.medium: Temperature T = 259.866 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 5400.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T >= 272.15)), pip1.vol_a.dynBal.medium.T=-1.587183965503291e+20) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = -1.58718e+20 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 5400.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T <= 403.15)), splPip1.vol.dynBal.medium.T=1686200.600321512) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = 1.6862e+06 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 5400.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T <= 403.15)), splPip2.vol.dynBal.medium.T=5604542.591375874) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = 5.60454e+06 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 5400.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T >= 272.15)), pip0.vol_a.dynBal.medium.T=-4.356125162595436e+22) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = -4.35613e+22 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 5400.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T <= 403.15)), pip0.vol_b.dynBal.medium.T=2.168901117762075e+23) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = 2.1689e+23 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 5400.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T >= 272.15)), pip3.vol_a.dynBal.medium.T=-840253.8627584907) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = -840254 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 5400.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T <= 403.15)), pip3.vol_b.dynBal.medium.T=20889.39662475531) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = 20889.4 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 5400.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T >= 272.15)), pip2.vol_a.dynBal.medium.T=-1355440.397897538) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = -1.35544e+06 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 5400.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T <= 403.15)), pip2.vol_b.dynBal.medium.T=186142.5654457152) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = 186143 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 5400.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T >= 272.15)), pip5.vol_a.dynBal.medium.T=-827424.0311414028) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = -827424 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 5400.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T <= 403.15)), pip5.vol_b.dynBal.medium.T=55204.47301372194) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = 55204.5 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 5400.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T >= 272.15)), pip4.vol_a.dynBal.medium.T=-100800.1391209163) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = -100800 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 5400.000000 | | | | ((noEvent(pip4.vol_b.dynBal.medium.T >= 272.15)), pip4.vol_b.dynBal.medium.T=259.8659701153938) --> "In GroundCouplingAIT.pip4.vol_b.dynBal.medium: Temperature T = 259.866 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 5400.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T >= 272.15)), pip1.vol_a.dynBal.medium.T=-1.587183965503291e+20) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = -1.58718e+20 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | Found event, previous asserts are ignored. LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(pip1.vol_b.dynBal.medium.T >= 272.15)), pip1.vol_b.dynBal.medium.T=222.9247751081682) --> "In GroundCouplingAIT.pip1.vol_b.dynBal.medium: Temperature T = 222.925 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T <= 403.15)), pip1.vol_a.dynBal.medium.T=5.855362169841618e+23) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = 5.85536e+23 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(pip4.vol_b.dynBal.medium.T <= 403.15)), pip4.vol_b.dynBal.medium.T=1633.210179365525) --> "In GroundCouplingAIT.pip4.vol_b.dynBal.medium: Temperature T = 1633.21 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T <= 403.15)), pip4.vol_a.dynBal.medium.T=4439791.86087435) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = 4.43979e+06 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T >= 272.15)), pip5.vol_b.dynBal.medium.T=-2024832.629731952) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = -2.02483e+06 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T <= 403.15)), pip5.vol_a.dynBal.medium.T=34878255.01004189) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = 3.48783e+07 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T >= 272.15)), pip2.vol_b.dynBal.medium.T=-6681947.029448532) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = -6.68195e+06 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T <= 403.15)), pip2.vol_a.dynBal.medium.T=55440913.80434935) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = 5.54409e+07 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T >= 272.15)), pip3.vol_b.dynBal.medium.T=-1144419.537019522) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = -1.14442e+06 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T <= 403.15)), pip3.vol_a.dynBal.medium.T=29361217.82059465) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = 2.93612e+07 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T >= 272.15)), pip0.vol_b.dynBal.medium.T=-7.818521940185985e+26) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = -7.81852e+26 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T <= 403.15)), pip0.vol_a.dynBal.medium.T=1.308524957726434e+26) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = 1.30852e+26 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T >= 272.15)), splPip2.vol.dynBal.medium.T=-210819644.0247481) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = -2.1082e+08 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T >= 272.15)), splPip1.vol.dynBal.medium.T=-70133407.07848214) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = -7.01334e+07 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T >= 272.15)), splPip1.vol.dynBal.medium.T=-70133407.07848214) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = -7.01334e+07 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T >= 272.15)), splPip2.vol.dynBal.medium.T=-210819644.0247481) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = -2.1082e+08 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T <= 403.15)), pip0.vol_a.dynBal.medium.T=1.308524957726434e+26) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = 1.30852e+26 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T >= 272.15)), pip0.vol_b.dynBal.medium.T=-7.818521940185985e+26) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = -7.81852e+26 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T <= 403.15)), pip3.vol_a.dynBal.medium.T=29361217.82059465) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = 2.93612e+07 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T >= 272.15)), pip3.vol_b.dynBal.medium.T=-1144419.537019522) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = -1.14442e+06 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T <= 403.15)), pip2.vol_a.dynBal.medium.T=55440913.80434935) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = 5.54409e+07 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T >= 272.15)), pip2.vol_b.dynBal.medium.T=-6681947.029448532) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = -6.68195e+06 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T <= 403.15)), pip5.vol_a.dynBal.medium.T=34878255.01004189) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = 3.48783e+07 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T >= 272.15)), pip5.vol_b.dynBal.medium.T=-2024832.629731952) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = -2.02483e+06 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T <= 403.15)), pip4.vol_a.dynBal.medium.T=4439791.86087435) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = 4.43979e+06 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(pip4.vol_b.dynBal.medium.T <= 403.15)), pip4.vol_b.dynBal.medium.T=1633.210179365525) --> "In GroundCouplingAIT.pip4.vol_b.dynBal.medium: Temperature T = 1633.21 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T <= 403.15)), pip1.vol_a.dynBal.medium.T=5.855362169841618e+23) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = 5.85536e+23 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(pip1.vol_b.dynBal.medium.T >= 272.15)), pip1.vol_b.dynBal.medium.T=222.9247751081682) --> "In GroundCouplingAIT.pip1.vol_b.dynBal.medium: Temperature T = 222.925 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T >= 272.15)), splPip1.vol.dynBal.medium.T=-70133407.07848214) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = -7.01334e+07 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T >= 272.15)), splPip2.vol.dynBal.medium.T=-210819644.0247481) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = -2.1082e+08 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T <= 403.15)), pip0.vol_a.dynBal.medium.T=1.308524957726434e+26) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = 1.30852e+26 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T >= 272.15)), pip0.vol_b.dynBal.medium.T=-7.818521940185985e+26) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = -7.81852e+26 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T <= 403.15)), pip3.vol_a.dynBal.medium.T=29361217.82059465) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = 2.93612e+07 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T >= 272.15)), pip3.vol_b.dynBal.medium.T=-1144419.537019522) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = -1.14442e+06 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T <= 403.15)), pip2.vol_a.dynBal.medium.T=55440913.80434935) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = 5.54409e+07 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T >= 272.15)), pip2.vol_b.dynBal.medium.T=-6681947.029448532) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = -6.68195e+06 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T <= 403.15)), pip5.vol_a.dynBal.medium.T=34878255.01004189) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = 3.48783e+07 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T >= 272.15)), pip5.vol_b.dynBal.medium.T=-2024832.629731952) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = -2.02483e+06 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T <= 403.15)), pip4.vol_a.dynBal.medium.T=4439791.86087435) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = 4.43979e+06 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(pip4.vol_b.dynBal.medium.T <= 403.15)), pip4.vol_b.dynBal.medium.T=1633.210179365525) --> "In GroundCouplingAIT.pip4.vol_b.dynBal.medium: Temperature T = 1633.21 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T <= 403.15)), pip1.vol_a.dynBal.medium.T=5.855362169841618e+23) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = 5.85536e+23 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(pip1.vol_b.dynBal.medium.T >= 272.15)), pip1.vol_b.dynBal.medium.T=222.9247751081682) --> "In GroundCouplingAIT.pip1.vol_b.dynBal.medium: Temperature T = 222.925 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T >= 272.15)), splPip1.vol.dynBal.medium.T=-70133407.07848214) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = -7.01334e+07 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T >= 272.15)), splPip2.vol.dynBal.medium.T=-210819644.0247481) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = -2.1082e+08 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T <= 403.15)), pip0.vol_a.dynBal.medium.T=1.308524957726434e+26) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = 1.30852e+26 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T >= 272.15)), pip0.vol_b.dynBal.medium.T=-7.818521940185985e+26) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = -7.81852e+26 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T <= 403.15)), pip3.vol_a.dynBal.medium.T=29361217.82059465) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = 2.93612e+07 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T >= 272.15)), pip3.vol_b.dynBal.medium.T=-1144419.537019522) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = -1.14442e+06 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T <= 403.15)), pip2.vol_a.dynBal.medium.T=55440913.80434935) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = 5.54409e+07 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T >= 272.15)), pip2.vol_b.dynBal.medium.T=-6681947.029448532) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = -6.68195e+06 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T <= 403.15)), pip5.vol_a.dynBal.medium.T=34878255.01004189) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = 3.48783e+07 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T >= 272.15)), pip5.vol_b.dynBal.medium.T=-2024832.629731952) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = -2.02483e+06 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T <= 403.15)), pip4.vol_a.dynBal.medium.T=4439791.86087435) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = 4.43979e+06 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(pip4.vol_b.dynBal.medium.T <= 403.15)), pip4.vol_b.dynBal.medium.T=1633.210179365525) --> "In GroundCouplingAIT.pip4.vol_b.dynBal.medium: Temperature T = 1633.21 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T <= 403.15)), pip1.vol_a.dynBal.medium.T=5.855362169841618e+23) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = 5.85536e+23 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(pip1.vol_b.dynBal.medium.T >= 272.15)), pip1.vol_b.dynBal.medium.T=222.9247751081682) --> "In GroundCouplingAIT.pip1.vol_b.dynBal.medium: Temperature T = 222.925 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T >= 272.15)), splPip1.vol.dynBal.medium.T=-70133407.07848214) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = -7.01334e+07 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T >= 272.15)), splPip2.vol.dynBal.medium.T=-210819644.0247481) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = -2.1082e+08 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T <= 403.15)), pip0.vol_a.dynBal.medium.T=1.308524957726434e+26) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = 1.30852e+26 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T >= 272.15)), pip0.vol_b.dynBal.medium.T=-7.818521940185985e+26) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = -7.81852e+26 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T <= 403.15)), pip3.vol_a.dynBal.medium.T=29361217.82059465) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = 2.93612e+07 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T >= 272.15)), pip3.vol_b.dynBal.medium.T=-1144419.537019522) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = -1.14442e+06 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T <= 403.15)), pip2.vol_a.dynBal.medium.T=55440913.80434935) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = 5.54409e+07 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T >= 272.15)), pip2.vol_b.dynBal.medium.T=-6681947.029448532) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = -6.68195e+06 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T <= 403.15)), pip5.vol_a.dynBal.medium.T=34878255.01004189) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = 3.48783e+07 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T >= 272.15)), pip5.vol_b.dynBal.medium.T=-2024832.629731952) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = -2.02483e+06 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T <= 403.15)), pip4.vol_a.dynBal.medium.T=4439791.86087435) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = 4.43979e+06 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(pip4.vol_b.dynBal.medium.T <= 403.15)), pip4.vol_b.dynBal.medium.T=1633.210179365525) --> "In GroundCouplingAIT.pip4.vol_b.dynBal.medium: Temperature T = 1633.21 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T <= 403.15)), pip1.vol_a.dynBal.medium.T=5.855362169841618e+23) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = 5.85536e+23 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 6300.000000 | | | | ((noEvent(pip1.vol_b.dynBal.medium.T >= 272.15)), pip1.vol_b.dynBal.medium.T=222.9247751081682) --> "In GroundCouplingAIT.pip1.vol_b.dynBal.medium: Temperature T = 222.925 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | Found event, previous asserts are ignored. LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(pip1.vol_b.dynBal.medium.T <= 403.15)), pip1.vol_b.dynBal.medium.T=2589457840.280431) --> "In GroundCouplingAIT.pip1.vol_b.dynBal.medium: Temperature T = 2.58946e+09 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T >= 272.15)), pip1.vol_a.dynBal.medium.T=-1.991831551090829e+27) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = -1.99183e+27 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(pip4.vol_b.dynBal.medium.T >= 272.15)), pip4.vol_b.dynBal.medium.T=-108153.7836783272) --> "In GroundCouplingAIT.pip4.vol_b.dynBal.medium: Temperature T = -108154 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T >= 272.15)), pip4.vol_a.dynBal.medium.T=-200833585.0875092) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = -2.00834e+08 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T <= 403.15)), pip5.vol_b.dynBal.medium.T=60145477.73113208) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = 6.01455e+07 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T >= 272.15)), pip5.vol_a.dynBal.medium.T=-1353527559.375625) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = -1.35353e+09 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T <= 403.15)), pip2.vol_b.dynBal.medium.T=231405312.9566538) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = 2.31405e+08 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T >= 272.15)), pip2.vol_a.dynBal.medium.T=-1837688994.553703) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = -1.83769e+09 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T <= 403.15)), pip3.vol_b.dynBal.medium.T=23709418.32704787) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = 2.37094e+07 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T >= 272.15)), pip3.vol_a.dynBal.medium.T=-1251414960.639385) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = -1.25141e+09 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T <= 403.15)), pip0.vol_b.dynBal.medium.T=2.673596574434225e+30) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = 2.6736e+30 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T >= 272.15)), pip0.vol_a.dynBal.medium.T=-3.835275924024738e+29) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = -3.83528e+29 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T <= 403.15)), splPip2.vol.dynBal.medium.T=7368432009.614338) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = 7.36843e+09 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T <= 403.15)), splPip1.vol.dynBal.medium.T=2749238519.05246) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = 2.74924e+09 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T <= 403.15)), splPip1.vol.dynBal.medium.T=2749238519.05246) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = 2.74924e+09 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T <= 403.15)), splPip2.vol.dynBal.medium.T=7368432009.614338) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = 7.36843e+09 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T >= 272.15)), pip0.vol_a.dynBal.medium.T=-3.835275924024738e+29) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = -3.83528e+29 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T <= 403.15)), pip0.vol_b.dynBal.medium.T=2.673596574434225e+30) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = 2.6736e+30 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T >= 272.15)), pip3.vol_a.dynBal.medium.T=-1251414960.639385) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = -1.25141e+09 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T <= 403.15)), pip3.vol_b.dynBal.medium.T=23709418.32704787) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = 2.37094e+07 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T >= 272.15)), pip2.vol_a.dynBal.medium.T=-1837688994.553703) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = -1.83769e+09 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T <= 403.15)), pip2.vol_b.dynBal.medium.T=231405312.9566538) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = 2.31405e+08 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T >= 272.15)), pip5.vol_a.dynBal.medium.T=-1353527559.375625) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = -1.35353e+09 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T <= 403.15)), pip5.vol_b.dynBal.medium.T=60145477.73113208) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = 6.01455e+07 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T >= 272.15)), pip4.vol_a.dynBal.medium.T=-200833585.0875092) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = -2.00834e+08 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(pip4.vol_b.dynBal.medium.T >= 272.15)), pip4.vol_b.dynBal.medium.T=-108153.7836783272) --> "In GroundCouplingAIT.pip4.vol_b.dynBal.medium: Temperature T = -108154 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T >= 272.15)), pip1.vol_a.dynBal.medium.T=-1.991831551090829e+27) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = -1.99183e+27 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(pip1.vol_b.dynBal.medium.T <= 403.15)), pip1.vol_b.dynBal.medium.T=2589457840.280431) --> "In GroundCouplingAIT.pip1.vol_b.dynBal.medium: Temperature T = 2.58946e+09 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T <= 403.15)), splPip1.vol.dynBal.medium.T=2749238519.05246) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = 2.74924e+09 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T <= 403.15)), splPip2.vol.dynBal.medium.T=7368432009.614338) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = 7.36843e+09 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T >= 272.15)), pip0.vol_a.dynBal.medium.T=-3.835275924024738e+29) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = -3.83528e+29 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T <= 403.15)), pip0.vol_b.dynBal.medium.T=2.673596574434225e+30) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = 2.6736e+30 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T >= 272.15)), pip3.vol_a.dynBal.medium.T=-1251414960.639385) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = -1.25141e+09 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T <= 403.15)), pip3.vol_b.dynBal.medium.T=23709418.32704787) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = 2.37094e+07 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T >= 272.15)), pip2.vol_a.dynBal.medium.T=-1837688994.553703) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = -1.83769e+09 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T <= 403.15)), pip2.vol_b.dynBal.medium.T=231405312.9566538) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = 2.31405e+08 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T >= 272.15)), pip5.vol_a.dynBal.medium.T=-1353527559.375625) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = -1.35353e+09 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T <= 403.15)), pip5.vol_b.dynBal.medium.T=60145477.73113208) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = 6.01455e+07 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T >= 272.15)), pip4.vol_a.dynBal.medium.T=-200833585.0875092) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = -2.00834e+08 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(pip4.vol_b.dynBal.medium.T >= 272.15)), pip4.vol_b.dynBal.medium.T=-108153.7836783272) --> "In GroundCouplingAIT.pip4.vol_b.dynBal.medium: Temperature T = -108154 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T >= 272.15)), pip1.vol_a.dynBal.medium.T=-1.991831551090829e+27) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = -1.99183e+27 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(pip1.vol_b.dynBal.medium.T <= 403.15)), pip1.vol_b.dynBal.medium.T=2589457840.280431) --> "In GroundCouplingAIT.pip1.vol_b.dynBal.medium: Temperature T = 2.58946e+09 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T <= 403.15)), splPip1.vol.dynBal.medium.T=2749238519.05246) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = 2.74924e+09 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T <= 403.15)), splPip2.vol.dynBal.medium.T=7368432009.614338) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = 7.36843e+09 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T >= 272.15)), pip0.vol_a.dynBal.medium.T=-3.835275924024738e+29) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = -3.83528e+29 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T <= 403.15)), pip0.vol_b.dynBal.medium.T=2.673596574434225e+30) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = 2.6736e+30 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T >= 272.15)), pip3.vol_a.dynBal.medium.T=-1251414960.639385) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = -1.25141e+09 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T <= 403.15)), pip3.vol_b.dynBal.medium.T=23709418.32704787) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = 2.37094e+07 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T >= 272.15)), pip2.vol_a.dynBal.medium.T=-1837688994.553703) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = -1.83769e+09 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T <= 403.15)), pip2.vol_b.dynBal.medium.T=231405312.9566538) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = 2.31405e+08 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T >= 272.15)), pip5.vol_a.dynBal.medium.T=-1353527559.375625) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = -1.35353e+09 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T <= 403.15)), pip5.vol_b.dynBal.medium.T=60145477.73113208) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = 6.01455e+07 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T >= 272.15)), pip4.vol_a.dynBal.medium.T=-200833585.0875092) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = -2.00834e+08 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(pip4.vol_b.dynBal.medium.T >= 272.15)), pip4.vol_b.dynBal.medium.T=-108153.7836783272) --> "In GroundCouplingAIT.pip4.vol_b.dynBal.medium: Temperature T = -108154 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T >= 272.15)), pip1.vol_a.dynBal.medium.T=-1.991831551090829e+27) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = -1.99183e+27 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(pip1.vol_b.dynBal.medium.T <= 403.15)), pip1.vol_b.dynBal.medium.T=2589457840.280431) --> "In GroundCouplingAIT.pip1.vol_b.dynBal.medium: Temperature T = 2.58946e+09 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T <= 403.15)), splPip1.vol.dynBal.medium.T=2749238519.05246) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = 2.74924e+09 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T <= 403.15)), splPip2.vol.dynBal.medium.T=7368432009.614338) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = 7.36843e+09 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T >= 272.15)), pip0.vol_a.dynBal.medium.T=-3.835275924024738e+29) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = -3.83528e+29 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T <= 403.15)), pip0.vol_b.dynBal.medium.T=2.673596574434225e+30) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = 2.6736e+30 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T >= 272.15)), pip3.vol_a.dynBal.medium.T=-1251414960.639385) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = -1.25141e+09 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T <= 403.15)), pip3.vol_b.dynBal.medium.T=23709418.32704787) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = 2.37094e+07 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T >= 272.15)), pip2.vol_a.dynBal.medium.T=-1837688994.553703) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = -1.83769e+09 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T <= 403.15)), pip2.vol_b.dynBal.medium.T=231405312.9566538) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = 2.31405e+08 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T >= 272.15)), pip5.vol_a.dynBal.medium.T=-1353527559.375625) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = -1.35353e+09 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T <= 403.15)), pip5.vol_b.dynBal.medium.T=60145477.73113208) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = 6.01455e+07 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T >= 272.15)), pip4.vol_a.dynBal.medium.T=-200833585.0875092) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = -2.00834e+08 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(pip4.vol_b.dynBal.medium.T >= 272.15)), pip4.vol_b.dynBal.medium.T=-108153.7836783272) --> "In GroundCouplingAIT.pip4.vol_b.dynBal.medium: Temperature T = -108154 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T >= 272.15)), pip1.vol_a.dynBal.medium.T=-1.991831551090829e+27) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = -1.99183e+27 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 7200.000000 | | | | ((noEvent(pip1.vol_b.dynBal.medium.T <= 403.15)), pip1.vol_b.dynBal.medium.T=2589457840.280431) --> "In GroundCouplingAIT.pip1.vol_b.dynBal.medium: Temperature T = 2.58946e+09 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | Found event, previous asserts are ignored. LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(pip1.vol_b.dynBal.medium.T >= 272.15)), pip1.vol_b.dynBal.medium.T=-13423256704743.32) --> "In GroundCouplingAIT.pip1.vol_b.dynBal.medium: Temperature T = -1.34233e+13 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T <= 403.15)), pip1.vol_a.dynBal.medium.T=6.709497607016466e+30) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = 6.7095e+30 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(pip4.vol_b.dynBal.medium.T <= 403.15)), pip4.vol_b.dynBal.medium.T=5766082.783680842) --> "In GroundCouplingAIT.pip4.vol_b.dynBal.medium: Temperature T = 5.76608e+06 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T <= 403.15)), pip4.vol_a.dynBal.medium.T=7919661065.416757) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = 7.91966e+09 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T >= 272.15)), pip5.vol_b.dynBal.medium.T=-22464564318.65649) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = -2.24646e+10 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T <= 403.15)), pip5.vol_a.dynBal.medium.T=51994361400.8658) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = 5.19944e+10 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T >= 272.15)), pip2.vol_b.dynBal.medium.T=-6734210459.011343) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = -6.73421e+09 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T <= 403.15)), pip2.vol_a.dynBal.medium.T=63618430961.97552) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = 6.36184e+10 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T >= 272.15)), pip3.vol_b.dynBal.medium.T=-1502169445.487867) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = -1.50217e+09 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T <= 403.15)), pip3.vol_a.dynBal.medium.T=41928536745.91962) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = 4.19285e+10 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T >= 272.15)), pip0.vol_b.dynBal.medium.T=-7.954210268186996e+33) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = -7.95421e+33 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T <= 403.15)), pip0.vol_a.dynBal.medium.T=9.983941977639377e+32) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = 9.98394e+32 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T >= 272.15)), splPip2.vol.dynBal.medium.T=-253537397178.6161) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = -2.53537e+11 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T >= 272.15)), splPip1.vol.dynBal.medium.T=-3578076360.319846) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = -3.57808e+09 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T >= 272.15)), splPip1.vol.dynBal.medium.T=-3578076360.319846) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = -3.57808e+09 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T >= 272.15)), splPip2.vol.dynBal.medium.T=-253537397178.6161) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = -2.53537e+11 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T <= 403.15)), pip0.vol_a.dynBal.medium.T=9.983941977639377e+32) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = 9.98394e+32 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T >= 272.15)), pip0.vol_b.dynBal.medium.T=-7.954210268186996e+33) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = -7.95421e+33 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T <= 403.15)), pip3.vol_a.dynBal.medium.T=41928536745.91962) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = 4.19285e+10 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T >= 272.15)), pip3.vol_b.dynBal.medium.T=-1502169445.487867) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = -1.50217e+09 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T <= 403.15)), pip2.vol_a.dynBal.medium.T=63618430961.97552) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = 6.36184e+10 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T >= 272.15)), pip2.vol_b.dynBal.medium.T=-6734210459.011343) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = -6.73421e+09 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T <= 403.15)), pip5.vol_a.dynBal.medium.T=51994361400.8658) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = 5.19944e+10 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T >= 272.15)), pip5.vol_b.dynBal.medium.T=-22464564318.65649) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = -2.24646e+10 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T <= 403.15)), pip4.vol_a.dynBal.medium.T=7919661065.416757) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = 7.91966e+09 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(pip4.vol_b.dynBal.medium.T <= 403.15)), pip4.vol_b.dynBal.medium.T=5766082.783680842) --> "In GroundCouplingAIT.pip4.vol_b.dynBal.medium: Temperature T = 5.76608e+06 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T <= 403.15)), pip1.vol_a.dynBal.medium.T=6.709497607016466e+30) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = 6.7095e+30 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(pip1.vol_b.dynBal.medium.T >= 272.15)), pip1.vol_b.dynBal.medium.T=-13423256704743.32) --> "In GroundCouplingAIT.pip1.vol_b.dynBal.medium: Temperature T = -1.34233e+13 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T >= 272.15)), splPip1.vol.dynBal.medium.T=-3578076360.319846) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = -3.57808e+09 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T >= 272.15)), splPip2.vol.dynBal.medium.T=-253537397178.6161) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = -2.53537e+11 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T <= 403.15)), pip0.vol_a.dynBal.medium.T=9.983941977639377e+32) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = 9.98394e+32 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T >= 272.15)), pip0.vol_b.dynBal.medium.T=-7.954210268186996e+33) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = -7.95421e+33 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T <= 403.15)), pip3.vol_a.dynBal.medium.T=41928536745.91962) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = 4.19285e+10 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T >= 272.15)), pip3.vol_b.dynBal.medium.T=-1502169445.487867) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = -1.50217e+09 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T <= 403.15)), pip2.vol_a.dynBal.medium.T=63618430961.97552) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = 6.36184e+10 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T >= 272.15)), pip2.vol_b.dynBal.medium.T=-6734210459.011343) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = -6.73421e+09 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T <= 403.15)), pip5.vol_a.dynBal.medium.T=51994361400.8658) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = 5.19944e+10 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T >= 272.15)), pip5.vol_b.dynBal.medium.T=-22464564318.65649) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = -2.24646e+10 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T <= 403.15)), pip4.vol_a.dynBal.medium.T=7919661065.416757) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = 7.91966e+09 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(pip4.vol_b.dynBal.medium.T <= 403.15)), pip4.vol_b.dynBal.medium.T=5766082.783680842) --> "In GroundCouplingAIT.pip4.vol_b.dynBal.medium: Temperature T = 5.76608e+06 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T <= 403.15)), pip1.vol_a.dynBal.medium.T=6.709497607016466e+30) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = 6.7095e+30 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(pip1.vol_b.dynBal.medium.T >= 272.15)), pip1.vol_b.dynBal.medium.T=-13423256704743.32) --> "In GroundCouplingAIT.pip1.vol_b.dynBal.medium: Temperature T = -1.34233e+13 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T >= 272.15)), splPip1.vol.dynBal.medium.T=-3578076360.319846) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = -3.57808e+09 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T >= 272.15)), splPip2.vol.dynBal.medium.T=-253537397178.6161) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = -2.53537e+11 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T <= 403.15)), pip0.vol_a.dynBal.medium.T=9.983941977639377e+32) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = 9.98394e+32 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T >= 272.15)), pip0.vol_b.dynBal.medium.T=-7.954210268186996e+33) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = -7.95421e+33 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T <= 403.15)), pip3.vol_a.dynBal.medium.T=41928536745.91962) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = 4.19285e+10 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T >= 272.15)), pip3.vol_b.dynBal.medium.T=-1502169445.487867) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = -1.50217e+09 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T <= 403.15)), pip2.vol_a.dynBal.medium.T=63618430961.97552) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = 6.36184e+10 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T >= 272.15)), pip2.vol_b.dynBal.medium.T=-6734210459.011343) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = -6.73421e+09 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T <= 403.15)), pip5.vol_a.dynBal.medium.T=51994361400.8658) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = 5.19944e+10 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T >= 272.15)), pip5.vol_b.dynBal.medium.T=-22464564318.65649) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = -2.24646e+10 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T <= 403.15)), pip4.vol_a.dynBal.medium.T=7919661065.416757) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = 7.91966e+09 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(pip4.vol_b.dynBal.medium.T <= 403.15)), pip4.vol_b.dynBal.medium.T=5766082.783680842) --> "In GroundCouplingAIT.pip4.vol_b.dynBal.medium: Temperature T = 5.76608e+06 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T <= 403.15)), pip1.vol_a.dynBal.medium.T=6.709497607016466e+30) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = 6.7095e+30 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(pip1.vol_b.dynBal.medium.T >= 272.15)), pip1.vol_b.dynBal.medium.T=-13423256704743.32) --> "In GroundCouplingAIT.pip1.vol_b.dynBal.medium: Temperature T = -1.34233e+13 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T >= 272.15)), splPip1.vol.dynBal.medium.T=-3578076360.319846) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = -3.57808e+09 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T >= 272.15)), splPip2.vol.dynBal.medium.T=-253537397178.6161) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = -2.53537e+11 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T <= 403.15)), pip0.vol_a.dynBal.medium.T=9.983941977639377e+32) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = 9.98394e+32 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T >= 272.15)), pip0.vol_b.dynBal.medium.T=-7.954210268186996e+33) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = -7.95421e+33 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T <= 403.15)), pip3.vol_a.dynBal.medium.T=41928536745.91962) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = 4.19285e+10 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T >= 272.15)), pip3.vol_b.dynBal.medium.T=-1502169445.487867) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = -1.50217e+09 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T <= 403.15)), pip2.vol_a.dynBal.medium.T=63618430961.97552) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = 6.36184e+10 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T >= 272.15)), pip2.vol_b.dynBal.medium.T=-6734210459.011343) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = -6.73421e+09 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T <= 403.15)), pip5.vol_a.dynBal.medium.T=51994361400.8658) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = 5.19944e+10 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T >= 272.15)), pip5.vol_b.dynBal.medium.T=-22464564318.65649) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = -2.24646e+10 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T <= 403.15)), pip4.vol_a.dynBal.medium.T=7919661065.416757) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = 7.91966e+09 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(pip4.vol_b.dynBal.medium.T <= 403.15)), pip4.vol_b.dynBal.medium.T=5766082.783680842) --> "In GroundCouplingAIT.pip4.vol_b.dynBal.medium: Temperature T = 5.76608e+06 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T <= 403.15)), pip1.vol_a.dynBal.medium.T=6.709497607016466e+30) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = 6.7095e+30 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 8100.000000 | | | | ((noEvent(pip1.vol_b.dynBal.medium.T >= 272.15)), pip1.vol_b.dynBal.medium.T=-13423256704743.32) --> "In GroundCouplingAIT.pip1.vol_b.dynBal.medium: Temperature T = -1.34233e+13 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | Found event, previous asserts are ignored. LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(pip1.vol_b.dynBal.medium.T <= 403.15)), pip1.vol_b.dynBal.medium.T=5.956066719812677e+16) --> "In GroundCouplingAIT.pip1.vol_b.dynBal.medium: Temperature T = 5.95607e+16 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T >= 272.15)), pip1.vol_a.dynBal.medium.T=-2.14754168176526e+34) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = -2.14754e+34 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(pip4.vol_b.dynBal.medium.T >= 272.15)), pip4.vol_b.dynBal.medium.T=-259755692.2062293) --> "In GroundCouplingAIT.pip4.vol_b.dynBal.medium: Temperature T = -2.59756e+08 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T >= 272.15)), pip4.vol_a.dynBal.medium.T=-21294951677.06875) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = -2.1295e+10 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T <= 403.15)), pip5.vol_b.dynBal.medium.T=112576520117450.6) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = 1.12577e+14 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T >= 272.15)), pip5.vol_a.dynBal.medium.T=-737404183393.8699) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = -7.37404e+11 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T <= 403.15)), pip2.vol_b.dynBal.medium.T=249449955589.7851) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = 2.4945e+11 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T >= 272.15)), pip2.vol_a.dynBal.medium.T=-2422005020570.42) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = -2.42201e+12 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T <= 403.15)), pip3.vol_b.dynBal.medium.T=45070876818.59699) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = 4.50709e+10 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T >= 272.15)), pip3.vol_a.dynBal.medium.T=-1533657989214.053) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = -1.53366e+12 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T <= 403.15)), pip0.vol_b.dynBal.medium.T=2.475982420326762e+37) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = 2.47598e+37 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T >= 272.15)), pip0.vol_a.dynBal.medium.T=-2.762646204586782e+36) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = -2.76265e+36 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T <= 403.15)), splPip2.vol.dynBal.medium.T=8758303084359.81) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = 8.7583e+12 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T >= 272.15)), splPip1.vol.dynBal.medium.T=-571681887645476.4) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = -5.71682e+14 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T >= 272.15)), splPip1.vol.dynBal.medium.T=-571681887645476.4) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = -5.71682e+14 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T <= 403.15)), splPip2.vol.dynBal.medium.T=8758303084359.81) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = 8.7583e+12 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T >= 272.15)), pip0.vol_a.dynBal.medium.T=-2.762646204586782e+36) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = -2.76265e+36 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T <= 403.15)), pip0.vol_b.dynBal.medium.T=2.475982420326762e+37) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = 2.47598e+37 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T >= 272.15)), pip3.vol_a.dynBal.medium.T=-1533657989214.053) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = -1.53366e+12 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T <= 403.15)), pip3.vol_b.dynBal.medium.T=45070876818.59699) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = 4.50709e+10 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T >= 272.15)), pip2.vol_a.dynBal.medium.T=-2422005020570.42) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = -2.42201e+12 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T <= 403.15)), pip2.vol_b.dynBal.medium.T=249449955589.7851) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = 2.4945e+11 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T >= 272.15)), pip5.vol_a.dynBal.medium.T=-737404183393.8699) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = -7.37404e+11 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T <= 403.15)), pip5.vol_b.dynBal.medium.T=112576520117450.6) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = 1.12577e+14 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T >= 272.15)), pip4.vol_a.dynBal.medium.T=-21294951677.06875) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = -2.1295e+10 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(pip4.vol_b.dynBal.medium.T >= 272.15)), pip4.vol_b.dynBal.medium.T=-259755692.2062293) --> "In GroundCouplingAIT.pip4.vol_b.dynBal.medium: Temperature T = -2.59756e+08 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T >= 272.15)), pip1.vol_a.dynBal.medium.T=-2.14754168176526e+34) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = -2.14754e+34 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(pip1.vol_b.dynBal.medium.T <= 403.15)), pip1.vol_b.dynBal.medium.T=5.956066719812677e+16) --> "In GroundCouplingAIT.pip1.vol_b.dynBal.medium: Temperature T = 5.95607e+16 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T >= 272.15)), splPip1.vol.dynBal.medium.T=-571681887645476.4) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = -5.71682e+14 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T <= 403.15)), splPip2.vol.dynBal.medium.T=8758303084359.81) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = 8.7583e+12 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T >= 272.15)), pip0.vol_a.dynBal.medium.T=-2.762646204586782e+36) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = -2.76265e+36 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T <= 403.15)), pip0.vol_b.dynBal.medium.T=2.475982420326762e+37) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = 2.47598e+37 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T >= 272.15)), pip3.vol_a.dynBal.medium.T=-1533657989214.053) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = -1.53366e+12 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T <= 403.15)), pip3.vol_b.dynBal.medium.T=45070876818.59699) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = 4.50709e+10 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T >= 272.15)), pip2.vol_a.dynBal.medium.T=-2422005020570.42) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = -2.42201e+12 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T <= 403.15)), pip2.vol_b.dynBal.medium.T=249449955589.7851) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = 2.4945e+11 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T >= 272.15)), pip5.vol_a.dynBal.medium.T=-737404183393.8699) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = -7.37404e+11 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T <= 403.15)), pip5.vol_b.dynBal.medium.T=112576520117450.6) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = 1.12577e+14 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T >= 272.15)), pip4.vol_a.dynBal.medium.T=-21294951677.06875) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = -2.1295e+10 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(pip4.vol_b.dynBal.medium.T >= 272.15)), pip4.vol_b.dynBal.medium.T=-259755692.2062293) --> "In GroundCouplingAIT.pip4.vol_b.dynBal.medium: Temperature T = -2.59756e+08 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T >= 272.15)), pip1.vol_a.dynBal.medium.T=-2.14754168176526e+34) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = -2.14754e+34 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(pip1.vol_b.dynBal.medium.T <= 403.15)), pip1.vol_b.dynBal.medium.T=5.956066719812677e+16) --> "In GroundCouplingAIT.pip1.vol_b.dynBal.medium: Temperature T = 5.95607e+16 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T >= 272.15)), splPip1.vol.dynBal.medium.T=-571681887645476.4) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = -5.71682e+14 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T <= 403.15)), splPip2.vol.dynBal.medium.T=8758303084359.81) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = 8.7583e+12 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T >= 272.15)), pip0.vol_a.dynBal.medium.T=-2.762646204586782e+36) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = -2.76265e+36 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T <= 403.15)), pip0.vol_b.dynBal.medium.T=2.475982420326762e+37) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = 2.47598e+37 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T >= 272.15)), pip3.vol_a.dynBal.medium.T=-1533657989214.053) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = -1.53366e+12 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T <= 403.15)), pip3.vol_b.dynBal.medium.T=45070876818.59699) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = 4.50709e+10 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T >= 272.15)), pip2.vol_a.dynBal.medium.T=-2422005020570.42) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = -2.42201e+12 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T <= 403.15)), pip2.vol_b.dynBal.medium.T=249449955589.7851) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = 2.4945e+11 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T >= 272.15)), pip5.vol_a.dynBal.medium.T=-737404183393.8699) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = -7.37404e+11 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T <= 403.15)), pip5.vol_b.dynBal.medium.T=112576520117450.6) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = 1.12577e+14 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T >= 272.15)), pip4.vol_a.dynBal.medium.T=-21294951677.06875) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = -2.1295e+10 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(pip4.vol_b.dynBal.medium.T >= 272.15)), pip4.vol_b.dynBal.medium.T=-259755692.2062293) --> "In GroundCouplingAIT.pip4.vol_b.dynBal.medium: Temperature T = -2.59756e+08 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T >= 272.15)), pip1.vol_a.dynBal.medium.T=-2.14754168176526e+34) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = -2.14754e+34 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(pip1.vol_b.dynBal.medium.T <= 403.15)), pip1.vol_b.dynBal.medium.T=5.956066719812677e+16) --> "In GroundCouplingAIT.pip1.vol_b.dynBal.medium: Temperature T = 5.95607e+16 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T >= 272.15)), splPip1.vol.dynBal.medium.T=-571681887645476.4) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = -5.71682e+14 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T <= 403.15)), splPip2.vol.dynBal.medium.T=8758303084359.81) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = 8.7583e+12 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T >= 272.15)), pip0.vol_a.dynBal.medium.T=-2.762646204586782e+36) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = -2.76265e+36 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T <= 403.15)), pip0.vol_b.dynBal.medium.T=2.475982420326762e+37) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = 2.47598e+37 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T >= 272.15)), pip3.vol_a.dynBal.medium.T=-1533657989214.053) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = -1.53366e+12 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T <= 403.15)), pip3.vol_b.dynBal.medium.T=45070876818.59699) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = 4.50709e+10 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T >= 272.15)), pip2.vol_a.dynBal.medium.T=-2422005020570.42) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = -2.42201e+12 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T <= 403.15)), pip2.vol_b.dynBal.medium.T=249449955589.7851) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = 2.4945e+11 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T >= 272.15)), pip5.vol_a.dynBal.medium.T=-737404183393.8699) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = -7.37404e+11 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T <= 403.15)), pip5.vol_b.dynBal.medium.T=112576520117450.6) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = 1.12577e+14 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T >= 272.15)), pip4.vol_a.dynBal.medium.T=-21294951677.06875) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = -2.1295e+10 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(pip4.vol_b.dynBal.medium.T >= 272.15)), pip4.vol_b.dynBal.medium.T=-259755692.2062293) --> "In GroundCouplingAIT.pip4.vol_b.dynBal.medium: Temperature T = -2.59756e+08 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T >= 272.15)), pip1.vol_a.dynBal.medium.T=-2.14754168176526e+34) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = -2.14754e+34 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 9000.000000 | | | | ((noEvent(pip1.vol_b.dynBal.medium.T <= 403.15)), pip1.vol_b.dynBal.medium.T=5.956066719812677e+16) --> "In GroundCouplingAIT.pip1.vol_b.dynBal.medium: Temperature T = 5.95607e+16 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | Found event, previous asserts are ignored. LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(pip1.vol_b.dynBal.medium.T >= 272.15)), pip1.vol_b.dynBal.medium.T=-7.173889094730352e+19) --> "In GroundCouplingAIT.pip1.vol_b.dynBal.medium: Temperature T = -7.17389e+19 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T <= 403.15)), pip1.vol_a.dynBal.medium.T=9.604678367766147e+37) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = 9.60468e+37 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(pip4.vol_b.dynBal.medium.T <= 403.15)), pip4.vol_b.dynBal.medium.T=8792668173.885843) --> "In GroundCouplingAIT.pip4.vol_b.dynBal.medium: Temperature T = 8.79267e+09 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T >= 272.15)), pip4.vol_a.dynBal.medium.T=-1452554277510995) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = -1.45255e+15 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T >= 272.15)), pip5.vol_b.dynBal.medium.T=-1.911229182639045e+17) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = -1.91123e+17 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T >= 272.15)), pip5.vol_a.dynBal.medium.T=-1.197885660965559e+16) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = -1.19789e+16 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T >= 272.15)), pip2.vol_b.dynBal.medium.T=-17573859393129.07) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = -1.75739e+13 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T <= 403.15)), pip2.vol_a.dynBal.medium.T=143013537377952.9) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = 1.43014e+14 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T >= 272.15)), pip3.vol_b.dynBal.medium.T=-1884131669336.134) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = -1.88413e+12 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T <= 403.15)), pip3.vol_a.dynBal.medium.T=50022522028402.13) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = 5.00225e+13 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T >= 272.15)), pip0.vol_b.dynBal.medium.T=-7.762684775133981e+40) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = -7.76268e+40 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T <= 403.15)), pip0.vol_a.dynBal.medium.T=7.795424186105713e+39) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = 7.79542e+39 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T <= 403.15)), splPip2.vol.dynBal.medium.T=5988687604190386) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = 5.98869e+15 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T <= 403.15)), splPip1.vol.dynBal.medium.T=3.679528082161617e+18) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = 3.67953e+18 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T <= 403.15)), splPip1.vol.dynBal.medium.T=3.679528082161617e+18) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = 3.67953e+18 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T <= 403.15)), splPip2.vol.dynBal.medium.T=5988687604190386) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = 5.98869e+15 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T <= 403.15)), pip0.vol_a.dynBal.medium.T=7.795424186105713e+39) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = 7.79542e+39 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T >= 272.15)), pip0.vol_b.dynBal.medium.T=-7.762684775133981e+40) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = -7.76268e+40 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T <= 403.15)), pip3.vol_a.dynBal.medium.T=50022522028402.13) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = 5.00225e+13 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T >= 272.15)), pip3.vol_b.dynBal.medium.T=-1884131669336.134) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = -1.88413e+12 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T <= 403.15)), pip2.vol_a.dynBal.medium.T=143013537377952.9) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = 1.43014e+14 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T >= 272.15)), pip2.vol_b.dynBal.medium.T=-17573859393129.07) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = -1.75739e+13 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T >= 272.15)), pip5.vol_a.dynBal.medium.T=-1.197885660965559e+16) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = -1.19789e+16 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T >= 272.15)), pip5.vol_b.dynBal.medium.T=-1.911229182639045e+17) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = -1.91123e+17 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T >= 272.15)), pip4.vol_a.dynBal.medium.T=-1452554277510995) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = -1.45255e+15 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(pip4.vol_b.dynBal.medium.T <= 403.15)), pip4.vol_b.dynBal.medium.T=8792668173.885843) --> "In GroundCouplingAIT.pip4.vol_b.dynBal.medium: Temperature T = 8.79267e+09 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T <= 403.15)), pip1.vol_a.dynBal.medium.T=9.604678367766147e+37) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = 9.60468e+37 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(pip1.vol_b.dynBal.medium.T >= 272.15)), pip1.vol_b.dynBal.medium.T=-7.173889094730352e+19) --> "In GroundCouplingAIT.pip1.vol_b.dynBal.medium: Temperature T = -7.17389e+19 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T <= 403.15)), splPip1.vol.dynBal.medium.T=3.679528082161617e+18) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = 3.67953e+18 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T <= 403.15)), splPip2.vol.dynBal.medium.T=5988687604190386) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = 5.98869e+15 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T <= 403.15)), pip0.vol_a.dynBal.medium.T=7.795424186105713e+39) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = 7.79542e+39 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T >= 272.15)), pip0.vol_b.dynBal.medium.T=-7.762684775133981e+40) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = -7.76268e+40 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T <= 403.15)), pip3.vol_a.dynBal.medium.T=50022522028402.13) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = 5.00225e+13 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T >= 272.15)), pip3.vol_b.dynBal.medium.T=-1884131669336.134) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = -1.88413e+12 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T <= 403.15)), pip2.vol_a.dynBal.medium.T=143013537377952.9) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = 1.43014e+14 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T >= 272.15)), pip2.vol_b.dynBal.medium.T=-17573859393129.07) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = -1.75739e+13 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T >= 272.15)), pip5.vol_a.dynBal.medium.T=-1.197885660965559e+16) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = -1.19789e+16 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T >= 272.15)), pip5.vol_b.dynBal.medium.T=-1.911229182639045e+17) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = -1.91123e+17 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T >= 272.15)), pip4.vol_a.dynBal.medium.T=-1452554277510995) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = -1.45255e+15 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(pip4.vol_b.dynBal.medium.T <= 403.15)), pip4.vol_b.dynBal.medium.T=8792668173.885843) --> "In GroundCouplingAIT.pip4.vol_b.dynBal.medium: Temperature T = 8.79267e+09 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T <= 403.15)), pip1.vol_a.dynBal.medium.T=9.604678367766147e+37) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = 9.60468e+37 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(pip1.vol_b.dynBal.medium.T >= 272.15)), pip1.vol_b.dynBal.medium.T=-7.173889094730352e+19) --> "In GroundCouplingAIT.pip1.vol_b.dynBal.medium: Temperature T = -7.17389e+19 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T <= 403.15)), splPip1.vol.dynBal.medium.T=3.679528082161617e+18) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = 3.67953e+18 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T <= 403.15)), splPip2.vol.dynBal.medium.T=5988687604190386) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = 5.98869e+15 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T <= 403.15)), pip0.vol_a.dynBal.medium.T=7.795424186105713e+39) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = 7.79542e+39 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T >= 272.15)), pip0.vol_b.dynBal.medium.T=-7.762684775133981e+40) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = -7.76268e+40 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T <= 403.15)), pip3.vol_a.dynBal.medium.T=50022522028402.13) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = 5.00225e+13 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T >= 272.15)), pip3.vol_b.dynBal.medium.T=-1884131669336.134) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = -1.88413e+12 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T <= 403.15)), pip2.vol_a.dynBal.medium.T=143013537377952.9) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = 1.43014e+14 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T >= 272.15)), pip2.vol_b.dynBal.medium.T=-17573859393129.07) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = -1.75739e+13 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T >= 272.15)), pip5.vol_a.dynBal.medium.T=-1.197885660965559e+16) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = -1.19789e+16 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T >= 272.15)), pip5.vol_b.dynBal.medium.T=-1.911229182639045e+17) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = -1.91123e+17 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T >= 272.15)), pip4.vol_a.dynBal.medium.T=-1452554277510995) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = -1.45255e+15 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(pip4.vol_b.dynBal.medium.T <= 403.15)), pip4.vol_b.dynBal.medium.T=8792668173.885843) --> "In GroundCouplingAIT.pip4.vol_b.dynBal.medium: Temperature T = 8.79267e+09 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T <= 403.15)), pip1.vol_a.dynBal.medium.T=9.604678367766147e+37) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = 9.60468e+37 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(pip1.vol_b.dynBal.medium.T >= 272.15)), pip1.vol_b.dynBal.medium.T=-7.173889094730352e+19) --> "In GroundCouplingAIT.pip1.vol_b.dynBal.medium: Temperature T = -7.17389e+19 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T <= 403.15)), splPip1.vol.dynBal.medium.T=3.679528082161617e+18) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = 3.67953e+18 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T <= 403.15)), splPip2.vol.dynBal.medium.T=5988687604190386) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = 5.98869e+15 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T <= 403.15)), pip0.vol_a.dynBal.medium.T=7.795424186105713e+39) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = 7.79542e+39 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T >= 272.15)), pip0.vol_b.dynBal.medium.T=-7.762684775133981e+40) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = -7.76268e+40 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T <= 403.15)), pip3.vol_a.dynBal.medium.T=50022522028402.13) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = 5.00225e+13 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T >= 272.15)), pip3.vol_b.dynBal.medium.T=-1884131669336.134) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = -1.88413e+12 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T <= 403.15)), pip2.vol_a.dynBal.medium.T=143013537377952.9) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = 1.43014e+14 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T >= 272.15)), pip2.vol_b.dynBal.medium.T=-17573859393129.07) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = -1.75739e+13 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T >= 272.15)), pip5.vol_a.dynBal.medium.T=-1.197885660965559e+16) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = -1.19789e+16 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T >= 272.15)), pip5.vol_b.dynBal.medium.T=-1.911229182639045e+17) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = -1.91123e+17 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T >= 272.15)), pip4.vol_a.dynBal.medium.T=-1452554277510995) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = -1.45255e+15 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(pip4.vol_b.dynBal.medium.T <= 403.15)), pip4.vol_b.dynBal.medium.T=8792668173.885843) --> "In GroundCouplingAIT.pip4.vol_b.dynBal.medium: Temperature T = 8.79267e+09 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T <= 403.15)), pip1.vol_a.dynBal.medium.T=9.604678367766147e+37) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = 9.60468e+37 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 9900.000000 | | | | ((noEvent(pip1.vol_b.dynBal.medium.T >= 272.15)), pip1.vol_b.dynBal.medium.T=-7.173889094730352e+19) --> "In GroundCouplingAIT.pip1.vol_b.dynBal.medium: Temperature T = -7.17389e+19 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | Found event, previous asserts are ignored. LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(pip1.vol_b.dynBal.medium.T <= 403.15)), pip1.vol_b.dynBal.medium.T=7.646927731081475e+23) --> "In GroundCouplingAIT.pip1.vol_b.dynBal.medium: Temperature T = 7.64693e+23 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T >= 272.15)), pip1.vol_a.dynBal.medium.T=-2.022502254631589e+41) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = -2.0225e+41 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(pip4.vol_b.dynBal.medium.T >= 272.15)), pip4.vol_b.dynBal.medium.T=-21657527752.93517) --> "In GroundCouplingAIT.pip4.vol_b.dynBal.medium: Temperature T = -2.16575e+10 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T <= 403.15)), pip4.vol_a.dynBal.medium.T=8.572137608628983e+18) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = 8.57214e+18 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T <= 403.15)), pip5.vol_b.dynBal.medium.T=8.502496566822485e+20) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = 8.5025e+20 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T <= 403.15)), pip5.vol_a.dynBal.medium.T=5.081189392490106e+19) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = 5.08119e+19 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T <= 403.15)), pip2.vol_b.dynBal.medium.T=857001904854417.4) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = 8.57002e+14 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T <= 403.15)), pip2.vol_a.dynBal.medium.T=4.501229443511749e+16) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = 4.50123e+16 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T <= 403.15)), pip3.vol_b.dynBal.medium.T=50611654319791.38) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = 5.06117e+13 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T <= 403.15)), pip3.vol_a.dynBal.medium.T=2.979895801173057e+16) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = 2.9799e+16 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T <= 403.15)), pip0.vol_b.dynBal.medium.T=2.440604507749591e+44) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = 2.4406e+44 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T >= 272.15)), pip0.vol_a.dynBal.medium.T=-2.228103128239031e+43) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = -2.2281e+43 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T >= 272.15)), splPip2.vol.dynBal.medium.T=-7.444830014209796e+18) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = -7.44483e+18 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T >= 272.15)), splPip1.vol.dynBal.medium.T=-3.096017494028856e+21) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = -3.09602e+21 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T >= 272.15)), splPip1.vol.dynBal.medium.T=-3.096017494028856e+21) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = -3.09602e+21 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T >= 272.15)), splPip2.vol.dynBal.medium.T=-7.444830014209796e+18) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = -7.44483e+18 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T >= 272.15)), pip0.vol_a.dynBal.medium.T=-2.228103128239031e+43) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = -2.2281e+43 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T <= 403.15)), pip0.vol_b.dynBal.medium.T=2.440604507749591e+44) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = 2.4406e+44 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T <= 403.15)), pip3.vol_a.dynBal.medium.T=2.979895801173057e+16) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = 2.9799e+16 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T <= 403.15)), pip3.vol_b.dynBal.medium.T=50611654319791.38) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = 5.06117e+13 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T <= 403.15)), pip2.vol_a.dynBal.medium.T=4.501229443511749e+16) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = 4.50123e+16 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T <= 403.15)), pip2.vol_b.dynBal.medium.T=857001904854417.4) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = 8.57002e+14 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T <= 403.15)), pip5.vol_a.dynBal.medium.T=5.081189392490106e+19) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = 5.08119e+19 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T <= 403.15)), pip5.vol_b.dynBal.medium.T=8.502496566822485e+20) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = 8.5025e+20 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T <= 403.15)), pip4.vol_a.dynBal.medium.T=8.572137608628983e+18) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = 8.57214e+18 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(pip4.vol_b.dynBal.medium.T >= 272.15)), pip4.vol_b.dynBal.medium.T=-21657527752.93517) --> "In GroundCouplingAIT.pip4.vol_b.dynBal.medium: Temperature T = -2.16575e+10 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T >= 272.15)), pip1.vol_a.dynBal.medium.T=-2.022502254631589e+41) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = -2.0225e+41 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(pip1.vol_b.dynBal.medium.T <= 403.15)), pip1.vol_b.dynBal.medium.T=7.646927731081475e+23) --> "In GroundCouplingAIT.pip1.vol_b.dynBal.medium: Temperature T = 7.64693e+23 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T >= 272.15)), splPip1.vol.dynBal.medium.T=-3.096017494028856e+21) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = -3.09602e+21 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T >= 272.15)), splPip2.vol.dynBal.medium.T=-7.444830014209796e+18) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = -7.44483e+18 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T >= 272.15)), pip0.vol_a.dynBal.medium.T=-2.228103128239031e+43) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = -2.2281e+43 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T <= 403.15)), pip0.vol_b.dynBal.medium.T=2.440604507749591e+44) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = 2.4406e+44 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T <= 403.15)), pip3.vol_a.dynBal.medium.T=2.979895801173057e+16) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = 2.9799e+16 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T <= 403.15)), pip3.vol_b.dynBal.medium.T=50611654319791.38) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = 5.06117e+13 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T <= 403.15)), pip2.vol_a.dynBal.medium.T=4.501229443511749e+16) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = 4.50123e+16 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T <= 403.15)), pip2.vol_b.dynBal.medium.T=857001904854417.4) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = 8.57002e+14 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T <= 403.15)), pip5.vol_a.dynBal.medium.T=5.081189392490106e+19) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = 5.08119e+19 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T <= 403.15)), pip5.vol_b.dynBal.medium.T=8.502496566822485e+20) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = 8.5025e+20 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T <= 403.15)), pip4.vol_a.dynBal.medium.T=8.572137608628983e+18) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = 8.57214e+18 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(pip4.vol_b.dynBal.medium.T >= 272.15)), pip4.vol_b.dynBal.medium.T=-21657527752.93517) --> "In GroundCouplingAIT.pip4.vol_b.dynBal.medium: Temperature T = -2.16575e+10 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T >= 272.15)), pip1.vol_a.dynBal.medium.T=-2.022502254631589e+41) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = -2.0225e+41 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(pip1.vol_b.dynBal.medium.T <= 403.15)), pip1.vol_b.dynBal.medium.T=7.646927731081475e+23) --> "In GroundCouplingAIT.pip1.vol_b.dynBal.medium: Temperature T = 7.64693e+23 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T >= 272.15)), splPip1.vol.dynBal.medium.T=-3.096017494028856e+21) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = -3.09602e+21 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T >= 272.15)), splPip2.vol.dynBal.medium.T=-7.444830014209796e+18) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = -7.44483e+18 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T >= 272.15)), pip0.vol_a.dynBal.medium.T=-2.228103128239031e+43) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = -2.2281e+43 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T <= 403.15)), pip0.vol_b.dynBal.medium.T=2.440604507749591e+44) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = 2.4406e+44 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T <= 403.15)), pip3.vol_a.dynBal.medium.T=2.979895801173057e+16) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = 2.9799e+16 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T <= 403.15)), pip3.vol_b.dynBal.medium.T=50611654319791.38) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = 5.06117e+13 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T <= 403.15)), pip2.vol_a.dynBal.medium.T=4.501229443511749e+16) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = 4.50123e+16 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T <= 403.15)), pip2.vol_b.dynBal.medium.T=857001904854417.4) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = 8.57002e+14 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T <= 403.15)), pip5.vol_a.dynBal.medium.T=5.081189392490106e+19) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = 5.08119e+19 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T <= 403.15)), pip5.vol_b.dynBal.medium.T=8.502496566822485e+20) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = 8.5025e+20 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T <= 403.15)), pip4.vol_a.dynBal.medium.T=8.572137608628983e+18) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = 8.57214e+18 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(pip4.vol_b.dynBal.medium.T >= 272.15)), pip4.vol_b.dynBal.medium.T=-21657527752.93517) --> "In GroundCouplingAIT.pip4.vol_b.dynBal.medium: Temperature T = -2.16575e+10 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T >= 272.15)), pip1.vol_a.dynBal.medium.T=-2.022502254631589e+41) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = -2.0225e+41 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(pip1.vol_b.dynBal.medium.T <= 403.15)), pip1.vol_b.dynBal.medium.T=7.646927731081475e+23) --> "In GroundCouplingAIT.pip1.vol_b.dynBal.medium: Temperature T = 7.64693e+23 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T >= 272.15)), splPip1.vol.dynBal.medium.T=-3.096017494028856e+21) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = -3.09602e+21 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T >= 272.15)), splPip2.vol.dynBal.medium.T=-7.444830014209796e+18) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = -7.44483e+18 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T >= 272.15)), pip0.vol_a.dynBal.medium.T=-2.228103128239031e+43) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = -2.2281e+43 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T <= 403.15)), pip0.vol_b.dynBal.medium.T=2.440604507749591e+44) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = 2.4406e+44 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T <= 403.15)), pip3.vol_a.dynBal.medium.T=2.979895801173057e+16) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = 2.9799e+16 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T <= 403.15)), pip3.vol_b.dynBal.medium.T=50611654319791.38) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = 5.06117e+13 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T <= 403.15)), pip2.vol_a.dynBal.medium.T=4.501229443511749e+16) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = 4.50123e+16 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T <= 403.15)), pip2.vol_b.dynBal.medium.T=857001904854417.4) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = 8.57002e+14 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T <= 403.15)), pip5.vol_a.dynBal.medium.T=5.081189392490106e+19) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = 5.08119e+19 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T <= 403.15)), pip5.vol_b.dynBal.medium.T=8.502496566822485e+20) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = 8.5025e+20 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T <= 403.15)), pip4.vol_a.dynBal.medium.T=8.572137608628983e+18) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = 8.57214e+18 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(pip4.vol_b.dynBal.medium.T >= 272.15)), pip4.vol_b.dynBal.medium.T=-21657527752.93517) --> "In GroundCouplingAIT.pip4.vol_b.dynBal.medium: Temperature T = -2.16575e+10 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T >= 272.15)), pip1.vol_a.dynBal.medium.T=-2.022502254631589e+41) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = -2.0225e+41 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 10800.000000 | | | | ((noEvent(pip1.vol_b.dynBal.medium.T <= 403.15)), pip1.vol_b.dynBal.medium.T=7.646927731081475e+23) --> "In GroundCouplingAIT.pip1.vol_b.dynBal.medium: Temperature T = 7.64693e+23 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | Found event, previous asserts are ignored. LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(pip1.vol_b.dynBal.medium.T >= 272.15)), pip1.vol_b.dynBal.medium.T=-2.627251420939465e+27) --> "In GroundCouplingAIT.pip1.vol_b.dynBal.medium: Temperature T = -2.62725e+27 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T <= 403.15)), pip1.vol_a.dynBal.medium.T=6.496443713376048e+44) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = 6.49644e+44 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(pip4.vol_b.dynBal.medium.T >= 272.15)), pip4.vol_b.dynBal.medium.T=-1153665508927675) --> "In GroundCouplingAIT.pip4.vol_b.dynBal.medium: Temperature T = -1.15367e+15 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T >= 272.15)), pip4.vol_a.dynBal.medium.T=-7.879882821329887e+21) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = -7.87988e+21 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T >= 272.15)), pip5.vol_b.dynBal.medium.T=-4.502920353175963e+24) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = -4.50292e+24 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T >= 272.15)), pip5.vol_a.dynBal.medium.T=-4.396175397427828e+22) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = -4.39618e+22 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T <= 403.15)), pip2.vol_b.dynBal.medium.T=1.552571110140707e+17) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = 1.55257e+17 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T >= 272.15)), pip2.vol_a.dynBal.medium.T=-5.744430965293332e+19) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = -5.74443e+19 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T <= 403.15)), pip3.vol_b.dynBal.medium.T=3.094361485286402e+16) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = 3.09436e+16 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T >= 272.15)), pip3.vol_a.dynBal.medium.T=-3.982902516683711e+19) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = -3.9829e+19 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T >= 272.15)), pip0.vol_b.dynBal.medium.T=-7.5127762460734e+47) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = -7.51278e+47 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T <= 403.15)), pip0.vol_a.dynBal.medium.T=6.287091335175247e+46) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = 6.28709e+46 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T <= 403.15)), splPip2.vol.dynBal.medium.T=3.292802345912979e+22) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = 3.2928e+22 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T <= 403.15)), splPip1.vol.dynBal.medium.T=3.224403318779738e+25) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = 3.2244e+25 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T <= 403.15)), splPip1.vol.dynBal.medium.T=3.224403318779738e+25) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = 3.2244e+25 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T <= 403.15)), splPip2.vol.dynBal.medium.T=3.292802345912979e+22) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = 3.2928e+22 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T <= 403.15)), pip0.vol_a.dynBal.medium.T=6.287091335175247e+46) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = 6.28709e+46 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T >= 272.15)), pip0.vol_b.dynBal.medium.T=-7.5127762460734e+47) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = -7.51278e+47 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T >= 272.15)), pip3.vol_a.dynBal.medium.T=-3.982902516683711e+19) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = -3.9829e+19 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T <= 403.15)), pip3.vol_b.dynBal.medium.T=3.094361485286402e+16) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = 3.09436e+16 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T >= 272.15)), pip2.vol_a.dynBal.medium.T=-5.744430965293332e+19) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = -5.74443e+19 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T <= 403.15)), pip2.vol_b.dynBal.medium.T=1.552571110140707e+17) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = 1.55257e+17 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T >= 272.15)), pip5.vol_a.dynBal.medium.T=-4.396175397427828e+22) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = -4.39618e+22 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T >= 272.15)), pip5.vol_b.dynBal.medium.T=-4.502920353175963e+24) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = -4.50292e+24 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T >= 272.15)), pip4.vol_a.dynBal.medium.T=-7.879882821329887e+21) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = -7.87988e+21 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(pip4.vol_b.dynBal.medium.T >= 272.15)), pip4.vol_b.dynBal.medium.T=-1153665508927675) --> "In GroundCouplingAIT.pip4.vol_b.dynBal.medium: Temperature T = -1.15367e+15 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T <= 403.15)), pip1.vol_a.dynBal.medium.T=6.496443713376048e+44) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = 6.49644e+44 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(pip1.vol_b.dynBal.medium.T >= 272.15)), pip1.vol_b.dynBal.medium.T=-2.627251420939465e+27) --> "In GroundCouplingAIT.pip1.vol_b.dynBal.medium: Temperature T = -2.62725e+27 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T <= 403.15)), splPip1.vol.dynBal.medium.T=3.224403318779738e+25) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = 3.2244e+25 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T <= 403.15)), splPip2.vol.dynBal.medium.T=3.292802345912979e+22) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = 3.2928e+22 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T <= 403.15)), pip0.vol_a.dynBal.medium.T=6.287091335175247e+46) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = 6.28709e+46 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T >= 272.15)), pip0.vol_b.dynBal.medium.T=-7.5127762460734e+47) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = -7.51278e+47 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T >= 272.15)), pip3.vol_a.dynBal.medium.T=-3.982902516683711e+19) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = -3.9829e+19 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T <= 403.15)), pip3.vol_b.dynBal.medium.T=3.094361485286402e+16) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = 3.09436e+16 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T >= 272.15)), pip2.vol_a.dynBal.medium.T=-5.744430965293332e+19) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = -5.74443e+19 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T <= 403.15)), pip2.vol_b.dynBal.medium.T=1.552571110140707e+17) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = 1.55257e+17 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T >= 272.15)), pip5.vol_a.dynBal.medium.T=-4.396175397427828e+22) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = -4.39618e+22 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T >= 272.15)), pip5.vol_b.dynBal.medium.T=-4.502920353175963e+24) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = -4.50292e+24 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T >= 272.15)), pip4.vol_a.dynBal.medium.T=-7.879882821329887e+21) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = -7.87988e+21 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(pip4.vol_b.dynBal.medium.T >= 272.15)), pip4.vol_b.dynBal.medium.T=-1153665508927675) --> "In GroundCouplingAIT.pip4.vol_b.dynBal.medium: Temperature T = -1.15367e+15 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T <= 403.15)), pip1.vol_a.dynBal.medium.T=6.496443713376048e+44) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = 6.49644e+44 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(pip1.vol_b.dynBal.medium.T >= 272.15)), pip1.vol_b.dynBal.medium.T=-2.627251420939465e+27) --> "In GroundCouplingAIT.pip1.vol_b.dynBal.medium: Temperature T = -2.62725e+27 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T <= 403.15)), splPip1.vol.dynBal.medium.T=3.224403318779738e+25) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = 3.2244e+25 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T <= 403.15)), splPip2.vol.dynBal.medium.T=3.292802345912979e+22) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = 3.2928e+22 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T <= 403.15)), pip0.vol_a.dynBal.medium.T=6.287091335175247e+46) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = 6.28709e+46 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T >= 272.15)), pip0.vol_b.dynBal.medium.T=-7.5127762460734e+47) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = -7.51278e+47 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T >= 272.15)), pip3.vol_a.dynBal.medium.T=-3.982902516683711e+19) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = -3.9829e+19 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T <= 403.15)), pip3.vol_b.dynBal.medium.T=3.094361485286402e+16) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = 3.09436e+16 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T >= 272.15)), pip2.vol_a.dynBal.medium.T=-5.744430965293332e+19) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = -5.74443e+19 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T <= 403.15)), pip2.vol_b.dynBal.medium.T=1.552571110140707e+17) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = 1.55257e+17 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T >= 272.15)), pip5.vol_a.dynBal.medium.T=-4.396175397427828e+22) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = -4.39618e+22 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T >= 272.15)), pip5.vol_b.dynBal.medium.T=-4.502920353175963e+24) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = -4.50292e+24 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T >= 272.15)), pip4.vol_a.dynBal.medium.T=-7.879882821329887e+21) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = -7.87988e+21 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(pip4.vol_b.dynBal.medium.T >= 272.15)), pip4.vol_b.dynBal.medium.T=-1153665508927675) --> "In GroundCouplingAIT.pip4.vol_b.dynBal.medium: Temperature T = -1.15367e+15 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T <= 403.15)), pip1.vol_a.dynBal.medium.T=6.496443713376048e+44) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = 6.49644e+44 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(pip1.vol_b.dynBal.medium.T >= 272.15)), pip1.vol_b.dynBal.medium.T=-2.627251420939465e+27) --> "In GroundCouplingAIT.pip1.vol_b.dynBal.medium: Temperature T = -2.62725e+27 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T <= 403.15)), splPip1.vol.dynBal.medium.T=3.224403318779738e+25) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = 3.2244e+25 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T <= 403.15)), splPip2.vol.dynBal.medium.T=3.292802345912979e+22) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = 3.2928e+22 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T <= 403.15)), pip0.vol_a.dynBal.medium.T=6.287091335175247e+46) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = 6.28709e+46 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T >= 272.15)), pip0.vol_b.dynBal.medium.T=-7.5127762460734e+47) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = -7.51278e+47 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T >= 272.15)), pip3.vol_a.dynBal.medium.T=-3.982902516683711e+19) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = -3.9829e+19 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T <= 403.15)), pip3.vol_b.dynBal.medium.T=3.094361485286402e+16) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = 3.09436e+16 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T >= 272.15)), pip2.vol_a.dynBal.medium.T=-5.744430965293332e+19) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = -5.74443e+19 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T <= 403.15)), pip2.vol_b.dynBal.medium.T=1.552571110140707e+17) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = 1.55257e+17 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T >= 272.15)), pip5.vol_a.dynBal.medium.T=-4.396175397427828e+22) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = -4.39618e+22 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T >= 272.15)), pip5.vol_b.dynBal.medium.T=-4.502920353175963e+24) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = -4.50292e+24 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T >= 272.15)), pip4.vol_a.dynBal.medium.T=-7.879882821329887e+21) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = -7.87988e+21 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(pip4.vol_b.dynBal.medium.T >= 272.15)), pip4.vol_b.dynBal.medium.T=-1153665508927675) --> "In GroundCouplingAIT.pip4.vol_b.dynBal.medium: Temperature T = -1.15367e+15 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T <= 403.15)), pip1.vol_a.dynBal.medium.T=6.496443713376048e+44) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = 6.49644e+44 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 11700.000000 | | | | ((noEvent(pip1.vol_b.dynBal.medium.T >= 272.15)), pip1.vol_b.dynBal.medium.T=-2.627251420939465e+27) --> "In GroundCouplingAIT.pip1.vol_b.dynBal.medium: Temperature T = -2.62725e+27 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | Found event, previous asserts are ignored. LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(pip1.vol_b.dynBal.medium.T <= 403.15)), pip1.vol_b.dynBal.medium.T=9.839863770523219e+30) --> "In GroundCouplingAIT.pip1.vol_b.dynBal.medium: Temperature T = 9.83986e+30 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T >= 272.15)), pip1.vol_a.dynBal.medium.T=-2.014097840764946e+48) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = -2.0141e+48 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(pip4.vol_b.dynBal.medium.T <= 403.15)), pip4.vol_b.dynBal.medium.T=7.443105696448086e+18) --> "In GroundCouplingAIT.pip4.vol_b.dynBal.medium: Temperature T = 7.44311e+18 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T <= 403.15)), pip4.vol_a.dynBal.medium.T=8.194103890648287e+25) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = 8.1941e+25 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T <= 403.15)), pip5.vol_b.dynBal.medium.T=1.655297690596029e+28) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = 1.6553e+28 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T <= 403.15)), pip5.vol_a.dynBal.medium.T=4.550743479994537e+26) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = 4.55074e+26 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T >= 272.15)), pip2.vol_b.dynBal.medium.T=-2.099442620305949e+20) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = -2.09944e+20 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T <= 403.15)), pip2.vol_a.dynBal.medium.T=2.584572824306272e+23) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = 2.58457e+23 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T >= 272.15)), pip3.vol_b.dynBal.medium.T=-4.966761667819479e+19) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = -4.96676e+19 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T <= 403.15)), pip3.vol_a.dynBal.medium.T=1.704355007487976e+23) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = 1.70436e+23 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T <= 403.15)), pip0.vol_b.dynBal.medium.T=2.341009954239321e+51) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = 2.34101e+51 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T >= 272.15)), pip0.vol_a.dynBal.medium.T=-1.808392379800955e+50) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = -1.80839e+50 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T >= 272.15)), splPip2.vol.dynBal.medium.T=-1.75504404152319e+26) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = -1.75504e+26 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T >= 272.15)), splPip1.vol.dynBal.medium.T=-1.124644136763954e+29) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = -1.12464e+29 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T >= 272.15)), splPip1.vol.dynBal.medium.T=-1.124644136763954e+29) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = -1.12464e+29 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T >= 272.15)), splPip2.vol.dynBal.medium.T=-1.75504404152319e+26) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = -1.75504e+26 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T >= 272.15)), pip0.vol_a.dynBal.medium.T=-1.808392379800955e+50) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = -1.80839e+50 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T <= 403.15)), pip0.vol_b.dynBal.medium.T=2.341009954239321e+51) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = 2.34101e+51 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T <= 403.15)), pip3.vol_a.dynBal.medium.T=1.704355007487976e+23) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = 1.70436e+23 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T >= 272.15)), pip3.vol_b.dynBal.medium.T=-4.966761667819479e+19) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = -4.96676e+19 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T <= 403.15)), pip2.vol_a.dynBal.medium.T=2.584572824306272e+23) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = 2.58457e+23 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T >= 272.15)), pip2.vol_b.dynBal.medium.T=-2.099442620305949e+20) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = -2.09944e+20 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T <= 403.15)), pip5.vol_a.dynBal.medium.T=4.550743479994537e+26) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = 4.55074e+26 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T <= 403.15)), pip5.vol_b.dynBal.medium.T=1.655297690596029e+28) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = 1.6553e+28 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T <= 403.15)), pip4.vol_a.dynBal.medium.T=8.194103890648287e+25) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = 8.1941e+25 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(pip4.vol_b.dynBal.medium.T <= 403.15)), pip4.vol_b.dynBal.medium.T=7.443105696448086e+18) --> "In GroundCouplingAIT.pip4.vol_b.dynBal.medium: Temperature T = 7.44311e+18 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T >= 272.15)), pip1.vol_a.dynBal.medium.T=-2.014097840764946e+48) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = -2.0141e+48 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(pip1.vol_b.dynBal.medium.T <= 403.15)), pip1.vol_b.dynBal.medium.T=9.839863770523219e+30) --> "In GroundCouplingAIT.pip1.vol_b.dynBal.medium: Temperature T = 9.83986e+30 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T >= 272.15)), splPip1.vol.dynBal.medium.T=-1.124644136763954e+29) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = -1.12464e+29 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T >= 272.15)), splPip2.vol.dynBal.medium.T=-1.75504404152319e+26) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = -1.75504e+26 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T >= 272.15)), pip0.vol_a.dynBal.medium.T=-1.808392379800955e+50) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = -1.80839e+50 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T <= 403.15)), pip0.vol_b.dynBal.medium.T=2.341009954239321e+51) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = 2.34101e+51 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T <= 403.15)), pip3.vol_a.dynBal.medium.T=1.704355007487976e+23) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = 1.70436e+23 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T >= 272.15)), pip3.vol_b.dynBal.medium.T=-4.966761667819479e+19) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = -4.96676e+19 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T <= 403.15)), pip2.vol_a.dynBal.medium.T=2.584572824306272e+23) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = 2.58457e+23 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T >= 272.15)), pip2.vol_b.dynBal.medium.T=-2.099442620305949e+20) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = -2.09944e+20 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T <= 403.15)), pip5.vol_a.dynBal.medium.T=4.550743479994537e+26) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = 4.55074e+26 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T <= 403.15)), pip5.vol_b.dynBal.medium.T=1.655297690596029e+28) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = 1.6553e+28 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T <= 403.15)), pip4.vol_a.dynBal.medium.T=8.194103890648287e+25) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = 8.1941e+25 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(pip4.vol_b.dynBal.medium.T <= 403.15)), pip4.vol_b.dynBal.medium.T=7.443105696448086e+18) --> "In GroundCouplingAIT.pip4.vol_b.dynBal.medium: Temperature T = 7.44311e+18 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T >= 272.15)), pip1.vol_a.dynBal.medium.T=-2.014097840764946e+48) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = -2.0141e+48 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(pip1.vol_b.dynBal.medium.T <= 403.15)), pip1.vol_b.dynBal.medium.T=9.839863770523219e+30) --> "In GroundCouplingAIT.pip1.vol_b.dynBal.medium: Temperature T = 9.83986e+30 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T >= 272.15)), splPip1.vol.dynBal.medium.T=-1.124644136763954e+29) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = -1.12464e+29 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T >= 272.15)), splPip2.vol.dynBal.medium.T=-1.75504404152319e+26) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = -1.75504e+26 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T >= 272.15)), pip0.vol_a.dynBal.medium.T=-1.808392379800955e+50) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = -1.80839e+50 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T <= 403.15)), pip0.vol_b.dynBal.medium.T=2.341009954239321e+51) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = 2.34101e+51 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T <= 403.15)), pip3.vol_a.dynBal.medium.T=1.704355007487976e+23) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = 1.70436e+23 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T >= 272.15)), pip3.vol_b.dynBal.medium.T=-4.966761667819479e+19) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = -4.96676e+19 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T <= 403.15)), pip2.vol_a.dynBal.medium.T=2.584572824306272e+23) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = 2.58457e+23 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T >= 272.15)), pip2.vol_b.dynBal.medium.T=-2.099442620305949e+20) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = -2.09944e+20 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T <= 403.15)), pip5.vol_a.dynBal.medium.T=4.550743479994537e+26) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = 4.55074e+26 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T <= 403.15)), pip5.vol_b.dynBal.medium.T=1.655297690596029e+28) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = 1.6553e+28 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T <= 403.15)), pip4.vol_a.dynBal.medium.T=8.194103890648287e+25) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = 8.1941e+25 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(pip4.vol_b.dynBal.medium.T <= 403.15)), pip4.vol_b.dynBal.medium.T=7.443105696448086e+18) --> "In GroundCouplingAIT.pip4.vol_b.dynBal.medium: Temperature T = 7.44311e+18 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T >= 272.15)), pip1.vol_a.dynBal.medium.T=-2.014097840764946e+48) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = -2.0141e+48 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(pip1.vol_b.dynBal.medium.T <= 403.15)), pip1.vol_b.dynBal.medium.T=9.839863770523219e+30) --> "In GroundCouplingAIT.pip1.vol_b.dynBal.medium: Temperature T = 9.83986e+30 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T >= 272.15)), splPip1.vol.dynBal.medium.T=-1.124644136763954e+29) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = -1.12464e+29 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T >= 272.15)), splPip2.vol.dynBal.medium.T=-1.75504404152319e+26) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = -1.75504e+26 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T >= 272.15)), pip0.vol_a.dynBal.medium.T=-1.808392379800955e+50) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = -1.80839e+50 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T <= 403.15)), pip0.vol_b.dynBal.medium.T=2.341009954239321e+51) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = 2.34101e+51 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T <= 403.15)), pip3.vol_a.dynBal.medium.T=1.704355007487976e+23) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = 1.70436e+23 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T >= 272.15)), pip3.vol_b.dynBal.medium.T=-4.966761667819479e+19) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = -4.96676e+19 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T <= 403.15)), pip2.vol_a.dynBal.medium.T=2.584572824306272e+23) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = 2.58457e+23 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T >= 272.15)), pip2.vol_b.dynBal.medium.T=-2.099442620305949e+20) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = -2.09944e+20 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T <= 403.15)), pip5.vol_a.dynBal.medium.T=4.550743479994537e+26) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = 4.55074e+26 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T <= 403.15)), pip5.vol_b.dynBal.medium.T=1.655297690596029e+28) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = 1.6553e+28 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T <= 403.15)), pip4.vol_a.dynBal.medium.T=8.194103890648287e+25) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = 8.1941e+25 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(pip4.vol_b.dynBal.medium.T <= 403.15)), pip4.vol_b.dynBal.medium.T=7.443105696448086e+18) --> "In GroundCouplingAIT.pip4.vol_b.dynBal.medium: Temperature T = 7.44311e+18 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T >= 272.15)), pip1.vol_a.dynBal.medium.T=-2.014097840764946e+48) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = -2.0141e+48 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 12600.000000 | | | | ((noEvent(pip1.vol_b.dynBal.medium.T <= 403.15)), pip1.vol_b.dynBal.medium.T=9.839863770523219e+30) --> "In GroundCouplingAIT.pip1.vol_b.dynBal.medium: Temperature T = 9.83986e+30 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | Found event, previous asserts are ignored. LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(pip1.vol_b.dynBal.medium.T >= 272.15)), pip1.vol_b.dynBal.medium.T=-3.11691515786579e+34) --> "In GroundCouplingAIT.pip1.vol_b.dynBal.medium: Temperature T = -3.11692e+34 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T <= 403.15)), pip1.vol_a.dynBal.medium.T=5.964315204015647e+51) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = 5.96432e+51 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(pip4.vol_b.dynBal.medium.T >= 272.15)), pip4.vol_b.dynBal.medium.T=-7.785266016019466e+21) --> "In GroundCouplingAIT.pip4.vol_b.dynBal.medium: Temperature T = -7.78527e+21 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T >= 272.15)), pip4.vol_a.dynBal.medium.T=-2.858872063540474e+29) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = -2.85887e+29 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T >= 272.15)), pip5.vol_b.dynBal.medium.T=-4.909725502146896e+31) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = -4.90973e+31 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T >= 272.15)), pip5.vol_a.dynBal.medium.T=-1.504842119758155e+30) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = -1.50484e+30 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T <= 403.15)), pip2.vol_b.dynBal.medium.T=9.036589902794187e+23) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = 9.03659e+23 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T >= 272.15)), pip2.vol_a.dynBal.medium.T=-1.292029846491718e+27) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = -1.29203e+27 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T <= 403.15)), pip3.vol_b.dynBal.medium.T=1.866983847602585e+23) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = 1.86698e+23 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T >= 272.15)), pip3.vol_a.dynBal.medium.T=-8.798487943596254e+26) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = -8.79849e+26 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T >= 272.15)), pip0.vol_b.dynBal.medium.T=-7.159833159979095e+54) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = -7.15983e+54 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T <= 403.15)), pip0.vol_a.dynBal.medium.T=5.135782724883815e+53) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = 5.13578e+53 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T <= 403.15)), splPip2.vol.dynBal.medium.T=6.120869115459692e+29) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = 6.12087e+29 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T <= 403.15)), splPip1.vol.dynBal.medium.T=3.999711285911481e+32) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = 3.99971e+32 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T <= 403.15)), splPip1.vol.dynBal.medium.T=3.999711285911481e+32) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = 3.99971e+32 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T <= 403.15)), splPip2.vol.dynBal.medium.T=6.120869115459692e+29) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = 6.12087e+29 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T <= 403.15)), pip0.vol_a.dynBal.medium.T=5.135782724883815e+53) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = 5.13578e+53 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T >= 272.15)), pip0.vol_b.dynBal.medium.T=-7.159833159979095e+54) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = -7.15983e+54 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T >= 272.15)), pip3.vol_a.dynBal.medium.T=-8.798487943596254e+26) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = -8.79849e+26 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T <= 403.15)), pip3.vol_b.dynBal.medium.T=1.866983847602585e+23) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = 1.86698e+23 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T >= 272.15)), pip2.vol_a.dynBal.medium.T=-1.292029846491718e+27) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = -1.29203e+27 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T <= 403.15)), pip2.vol_b.dynBal.medium.T=9.036589902794187e+23) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = 9.03659e+23 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T >= 272.15)), pip5.vol_a.dynBal.medium.T=-1.504842119758155e+30) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = -1.50484e+30 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T >= 272.15)), pip5.vol_b.dynBal.medium.T=-4.909725502146896e+31) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = -4.90973e+31 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T >= 272.15)), pip4.vol_a.dynBal.medium.T=-2.858872063540474e+29) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = -2.85887e+29 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(pip4.vol_b.dynBal.medium.T >= 272.15)), pip4.vol_b.dynBal.medium.T=-7.785266016019466e+21) --> "In GroundCouplingAIT.pip4.vol_b.dynBal.medium: Temperature T = -7.78527e+21 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T <= 403.15)), pip1.vol_a.dynBal.medium.T=5.964315204015647e+51) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = 5.96432e+51 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(pip1.vol_b.dynBal.medium.T >= 272.15)), pip1.vol_b.dynBal.medium.T=-3.11691515786579e+34) --> "In GroundCouplingAIT.pip1.vol_b.dynBal.medium: Temperature T = -3.11692e+34 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T <= 403.15)), splPip1.vol.dynBal.medium.T=3.999711285911481e+32) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = 3.99971e+32 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T <= 403.15)), splPip2.vol.dynBal.medium.T=6.120869115459692e+29) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = 6.12087e+29 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T <= 403.15)), pip0.vol_a.dynBal.medium.T=5.135782724883815e+53) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = 5.13578e+53 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T >= 272.15)), pip0.vol_b.dynBal.medium.T=-7.159833159979095e+54) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = -7.15983e+54 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T >= 272.15)), pip3.vol_a.dynBal.medium.T=-8.798487943596254e+26) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = -8.79849e+26 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T <= 403.15)), pip3.vol_b.dynBal.medium.T=1.866983847602585e+23) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = 1.86698e+23 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T >= 272.15)), pip2.vol_a.dynBal.medium.T=-1.292029846491718e+27) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = -1.29203e+27 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T <= 403.15)), pip2.vol_b.dynBal.medium.T=9.036589902794187e+23) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = 9.03659e+23 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T >= 272.15)), pip5.vol_a.dynBal.medium.T=-1.504842119758155e+30) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = -1.50484e+30 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T >= 272.15)), pip5.vol_b.dynBal.medium.T=-4.909725502146896e+31) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = -4.90973e+31 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T >= 272.15)), pip4.vol_a.dynBal.medium.T=-2.858872063540474e+29) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = -2.85887e+29 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(pip4.vol_b.dynBal.medium.T >= 272.15)), pip4.vol_b.dynBal.medium.T=-7.785266016019466e+21) --> "In GroundCouplingAIT.pip4.vol_b.dynBal.medium: Temperature T = -7.78527e+21 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T <= 403.15)), pip1.vol_a.dynBal.medium.T=5.964315204015647e+51) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = 5.96432e+51 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(pip1.vol_b.dynBal.medium.T >= 272.15)), pip1.vol_b.dynBal.medium.T=-3.11691515786579e+34) --> "In GroundCouplingAIT.pip1.vol_b.dynBal.medium: Temperature T = -3.11692e+34 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T <= 403.15)), splPip1.vol.dynBal.medium.T=3.999711285911481e+32) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = 3.99971e+32 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T <= 403.15)), splPip2.vol.dynBal.medium.T=6.120869115459692e+29) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = 6.12087e+29 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T <= 403.15)), pip0.vol_a.dynBal.medium.T=5.135782724883815e+53) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = 5.13578e+53 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T >= 272.15)), pip0.vol_b.dynBal.medium.T=-7.159833159979095e+54) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = -7.15983e+54 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T >= 272.15)), pip3.vol_a.dynBal.medium.T=-8.798487943596254e+26) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = -8.79849e+26 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T <= 403.15)), pip3.vol_b.dynBal.medium.T=1.866983847602585e+23) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = 1.86698e+23 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T >= 272.15)), pip2.vol_a.dynBal.medium.T=-1.292029846491718e+27) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = -1.29203e+27 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T <= 403.15)), pip2.vol_b.dynBal.medium.T=9.036589902794187e+23) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = 9.03659e+23 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T >= 272.15)), pip5.vol_a.dynBal.medium.T=-1.504842119758155e+30) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = -1.50484e+30 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T >= 272.15)), pip5.vol_b.dynBal.medium.T=-4.909725502146896e+31) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = -4.90973e+31 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T >= 272.15)), pip4.vol_a.dynBal.medium.T=-2.858872063540474e+29) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = -2.85887e+29 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(pip4.vol_b.dynBal.medium.T >= 272.15)), pip4.vol_b.dynBal.medium.T=-7.785266016019466e+21) --> "In GroundCouplingAIT.pip4.vol_b.dynBal.medium: Temperature T = -7.78527e+21 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T <= 403.15)), pip1.vol_a.dynBal.medium.T=5.964315204015647e+51) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = 5.96432e+51 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(pip1.vol_b.dynBal.medium.T >= 272.15)), pip1.vol_b.dynBal.medium.T=-3.11691515786579e+34) --> "In GroundCouplingAIT.pip1.vol_b.dynBal.medium: Temperature T = -3.11692e+34 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T <= 403.15)), splPip1.vol.dynBal.medium.T=3.999711285911481e+32) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = 3.99971e+32 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T <= 403.15)), splPip2.vol.dynBal.medium.T=6.120869115459692e+29) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = 6.12087e+29 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T <= 403.15)), pip0.vol_a.dynBal.medium.T=5.135782724883815e+53) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = 5.13578e+53 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T >= 272.15)), pip0.vol_b.dynBal.medium.T=-7.159833159979095e+54) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = -7.15983e+54 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T >= 272.15)), pip3.vol_a.dynBal.medium.T=-8.798487943596254e+26) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = -8.79849e+26 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T <= 403.15)), pip3.vol_b.dynBal.medium.T=1.866983847602585e+23) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = 1.86698e+23 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T >= 272.15)), pip2.vol_a.dynBal.medium.T=-1.292029846491718e+27) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = -1.29203e+27 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T <= 403.15)), pip2.vol_b.dynBal.medium.T=9.036589902794187e+23) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = 9.03659e+23 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T >= 272.15)), pip5.vol_a.dynBal.medium.T=-1.504842119758155e+30) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = -1.50484e+30 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T >= 272.15)), pip5.vol_b.dynBal.medium.T=-4.909725502146896e+31) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = -4.90973e+31 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T >= 272.15)), pip4.vol_a.dynBal.medium.T=-2.858872063540474e+29) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = -2.85887e+29 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(pip4.vol_b.dynBal.medium.T >= 272.15)), pip4.vol_b.dynBal.medium.T=-7.785266016019466e+21) --> "In GroundCouplingAIT.pip4.vol_b.dynBal.medium: Temperature T = -7.78527e+21 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T <= 403.15)), pip1.vol_a.dynBal.medium.T=5.964315204015647e+51) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = 5.96432e+51 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 13500.000000 | | | | ((noEvent(pip1.vol_b.dynBal.medium.T >= 272.15)), pip1.vol_b.dynBal.medium.T=-3.11691515786579e+34) --> "In GroundCouplingAIT.pip1.vol_b.dynBal.medium: Temperature T = -3.11692e+34 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | Found event, previous asserts are ignored. LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(pip1.vol_b.dynBal.medium.T <= 403.15)), pip1.vol_b.dynBal.medium.T=1.31548861548249e+38) --> "In GroundCouplingAIT.pip1.vol_b.dynBal.medium: Temperature T = 1.31549e+38 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T >= 272.15)), pip1.vol_a.dynBal.medium.T=-2.736475819988939e+55) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = -2.73648e+55 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(pip4.vol_b.dynBal.medium.T <= 403.15)), pip4.vol_b.dynBal.medium.T=6.739293560866521e+25) --> "In GroundCouplingAIT.pip4.vol_b.dynBal.medium: Temperature T = 6.73929e+25 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T <= 403.15)), pip4.vol_a.dynBal.medium.T=8.472253289143395e+32) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = 8.47225e+32 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T <= 403.15)), pip5.vol_b.dynBal.medium.T=3.505548563275274e+35) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = 3.50555e+35 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T <= 403.15)), pip5.vol_a.dynBal.medium.T=8.377384312433294e+33) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = 8.37738e+33 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T >= 272.15)), pip2.vol_b.dynBal.medium.T=-7.397364599029058e+27) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = -7.39736e+27 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T <= 403.15)), pip2.vol_a.dynBal.medium.T=7.928097468612062e+30) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = 7.9281e+30 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T >= 272.15)), pip3.vol_b.dynBal.medium.T=-8.587500016593578e+26) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = -8.5875e+26 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T <= 403.15)), pip3.vol_a.dynBal.medium.T=3.069693816905211e+30) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = 3.06969e+30 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T <= 403.15)), pip0.vol_b.dynBal.medium.T=2.220518958457123e+58) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = 2.22052e+58 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T >= 272.15)), pip0.vol_a.dynBal.medium.T=-1.486606499419592e+57) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = -1.48661e+57 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T >= 272.15)), splPip2.vol.dynBal.medium.T=-2.847733205850209e+33) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = -2.84773e+33 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T >= 272.15)), splPip1.vol.dynBal.medium.T=-1.903218128118526e+36) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = -1.90322e+36 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T >= 272.15)), splPip1.vol.dynBal.medium.T=-1.903218128118526e+36) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = -1.90322e+36 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T >= 272.15)), splPip2.vol.dynBal.medium.T=-2.847733205850209e+33) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = -2.84773e+33 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T >= 272.15)), pip0.vol_a.dynBal.medium.T=-1.486606499419592e+57) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = -1.48661e+57 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T <= 403.15)), pip0.vol_b.dynBal.medium.T=2.220518958457123e+58) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = 2.22052e+58 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T <= 403.15)), pip3.vol_a.dynBal.medium.T=3.069693816905211e+30) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = 3.06969e+30 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T >= 272.15)), pip3.vol_b.dynBal.medium.T=-8.587500016593578e+26) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = -8.5875e+26 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T <= 403.15)), pip2.vol_a.dynBal.medium.T=7.928097468612062e+30) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = 7.9281e+30 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T >= 272.15)), pip2.vol_b.dynBal.medium.T=-7.397364599029058e+27) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = -7.39736e+27 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T <= 403.15)), pip5.vol_a.dynBal.medium.T=8.377384312433294e+33) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = 8.37738e+33 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T <= 403.15)), pip5.vol_b.dynBal.medium.T=3.505548563275274e+35) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = 3.50555e+35 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T <= 403.15)), pip4.vol_a.dynBal.medium.T=8.472253289143395e+32) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = 8.47225e+32 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(pip4.vol_b.dynBal.medium.T <= 403.15)), pip4.vol_b.dynBal.medium.T=6.739293560866521e+25) --> "In GroundCouplingAIT.pip4.vol_b.dynBal.medium: Temperature T = 6.73929e+25 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T >= 272.15)), pip1.vol_a.dynBal.medium.T=-2.736475819988939e+55) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = -2.73648e+55 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(pip1.vol_b.dynBal.medium.T <= 403.15)), pip1.vol_b.dynBal.medium.T=1.31548861548249e+38) --> "In GroundCouplingAIT.pip1.vol_b.dynBal.medium: Temperature T = 1.31549e+38 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T >= 272.15)), splPip1.vol.dynBal.medium.T=-1.903218128118526e+36) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = -1.90322e+36 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T >= 272.15)), splPip2.vol.dynBal.medium.T=-2.847733205850209e+33) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = -2.84773e+33 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T >= 272.15)), pip0.vol_a.dynBal.medium.T=-1.486606499419592e+57) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = -1.48661e+57 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T <= 403.15)), pip0.vol_b.dynBal.medium.T=2.220518958457123e+58) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = 2.22052e+58 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T <= 403.15)), pip3.vol_a.dynBal.medium.T=3.069693816905211e+30) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = 3.06969e+30 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T >= 272.15)), pip3.vol_b.dynBal.medium.T=-8.587500016593578e+26) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = -8.5875e+26 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T <= 403.15)), pip2.vol_a.dynBal.medium.T=7.928097468612062e+30) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = 7.9281e+30 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T >= 272.15)), pip2.vol_b.dynBal.medium.T=-7.397364599029058e+27) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = -7.39736e+27 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T <= 403.15)), pip5.vol_a.dynBal.medium.T=8.377384312433294e+33) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = 8.37738e+33 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T <= 403.15)), pip5.vol_b.dynBal.medium.T=3.505548563275274e+35) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = 3.50555e+35 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T <= 403.15)), pip4.vol_a.dynBal.medium.T=8.472253289143395e+32) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = 8.47225e+32 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(pip4.vol_b.dynBal.medium.T <= 403.15)), pip4.vol_b.dynBal.medium.T=6.739293560866521e+25) --> "In GroundCouplingAIT.pip4.vol_b.dynBal.medium: Temperature T = 6.73929e+25 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T >= 272.15)), pip1.vol_a.dynBal.medium.T=-2.736475819988939e+55) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = -2.73648e+55 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(pip1.vol_b.dynBal.medium.T <= 403.15)), pip1.vol_b.dynBal.medium.T=1.31548861548249e+38) --> "In GroundCouplingAIT.pip1.vol_b.dynBal.medium: Temperature T = 1.31549e+38 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T >= 272.15)), splPip1.vol.dynBal.medium.T=-1.903218128118526e+36) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = -1.90322e+36 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T >= 272.15)), splPip2.vol.dynBal.medium.T=-2.847733205850209e+33) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = -2.84773e+33 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T >= 272.15)), pip0.vol_a.dynBal.medium.T=-1.486606499419592e+57) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = -1.48661e+57 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T <= 403.15)), pip0.vol_b.dynBal.medium.T=2.220518958457123e+58) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = 2.22052e+58 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T <= 403.15)), pip3.vol_a.dynBal.medium.T=3.069693816905211e+30) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = 3.06969e+30 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T >= 272.15)), pip3.vol_b.dynBal.medium.T=-8.587500016593578e+26) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = -8.5875e+26 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T <= 403.15)), pip2.vol_a.dynBal.medium.T=7.928097468612062e+30) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = 7.9281e+30 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T >= 272.15)), pip2.vol_b.dynBal.medium.T=-7.397364599029058e+27) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = -7.39736e+27 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T <= 403.15)), pip5.vol_a.dynBal.medium.T=8.377384312433294e+33) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = 8.37738e+33 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T <= 403.15)), pip5.vol_b.dynBal.medium.T=3.505548563275274e+35) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = 3.50555e+35 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T <= 403.15)), pip4.vol_a.dynBal.medium.T=8.472253289143395e+32) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = 8.47225e+32 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(pip4.vol_b.dynBal.medium.T <= 403.15)), pip4.vol_b.dynBal.medium.T=6.739293560866521e+25) --> "In GroundCouplingAIT.pip4.vol_b.dynBal.medium: Temperature T = 6.73929e+25 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T >= 272.15)), pip1.vol_a.dynBal.medium.T=-2.736475819988939e+55) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = -2.73648e+55 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(pip1.vol_b.dynBal.medium.T <= 403.15)), pip1.vol_b.dynBal.medium.T=1.31548861548249e+38) --> "In GroundCouplingAIT.pip1.vol_b.dynBal.medium: Temperature T = 1.31549e+38 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T >= 272.15)), splPip1.vol.dynBal.medium.T=-1.903218128118526e+36) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = -1.90322e+36 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T >= 272.15)), splPip2.vol.dynBal.medium.T=-2.847733205850209e+33) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = -2.84773e+33 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T >= 272.15)), pip0.vol_a.dynBal.medium.T=-1.486606499419592e+57) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = -1.48661e+57 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T <= 403.15)), pip0.vol_b.dynBal.medium.T=2.220518958457123e+58) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = 2.22052e+58 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T <= 403.15)), pip3.vol_a.dynBal.medium.T=3.069693816905211e+30) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = 3.06969e+30 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T >= 272.15)), pip3.vol_b.dynBal.medium.T=-8.587500016593578e+26) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = -8.5875e+26 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T <= 403.15)), pip2.vol_a.dynBal.medium.T=7.928097468612062e+30) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = 7.9281e+30 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T >= 272.15)), pip2.vol_b.dynBal.medium.T=-7.397364599029058e+27) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = -7.39736e+27 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T <= 403.15)), pip5.vol_a.dynBal.medium.T=8.377384312433294e+33) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = 8.37738e+33 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T <= 403.15)), pip5.vol_b.dynBal.medium.T=3.505548563275274e+35) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = 3.50555e+35 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T <= 403.15)), pip4.vol_a.dynBal.medium.T=8.472253289143395e+32) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = 8.47225e+32 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(pip4.vol_b.dynBal.medium.T <= 403.15)), pip4.vol_b.dynBal.medium.T=6.739293560866521e+25) --> "In GroundCouplingAIT.pip4.vol_b.dynBal.medium: Temperature T = 6.73929e+25 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T >= 272.15)), pip1.vol_a.dynBal.medium.T=-2.736475819988939e+55) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = -2.73648e+55 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 14400.000000 | | | | ((noEvent(pip1.vol_b.dynBal.medium.T <= 403.15)), pip1.vol_b.dynBal.medium.T=1.31548861548249e+38) --> "In GroundCouplingAIT.pip1.vol_b.dynBal.medium: Temperature T = 1.31549e+38 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | Found event, previous asserts are ignored. LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(pip1.vol_b.dynBal.medium.T >= 272.15)), pip1.vol_b.dynBal.medium.T=-2.583652779698405e+41) --> "In GroundCouplingAIT.pip1.vol_b.dynBal.medium: Temperature T = -2.58365e+41 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T <= 403.15)), pip1.vol_a.dynBal.medium.T=5.531864724024578e+58) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = 5.53186e+58 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(pip4.vol_b.dynBal.medium.T >= 272.15)), pip4.vol_b.dynBal.medium.T=-1.578195036690864e+29) --> "In GroundCouplingAIT.pip4.vol_b.dynBal.medium: Temperature T = -1.5782e+29 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T >= 272.15)), pip4.vol_a.dynBal.medium.T=-4.434024238607952e+36) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = -4.43402e+36 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T >= 272.15)), pip5.vol_b.dynBal.medium.T=-2.781129779452474e+38) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = -2.78113e+38 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T >= 272.15)), pip5.vol_a.dynBal.medium.T=-2.50567992482073e+37) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = -2.50568e+37 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T <= 403.15)), pip2.vol_b.dynBal.medium.T=3.950236048732e+31) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = 3.95024e+31 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T >= 272.15)), pip2.vol_a.dynBal.medium.T=-2.098818946511078e+34) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = -2.09882e+34 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T <= 403.15)), pip3.vol_b.dynBal.medium.T=2.801960446807551e+30) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = 2.80196e+30 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T >= 272.15)), pip3.vol_a.dynBal.medium.T=-1.335630381966076e+34) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = -1.33563e+34 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T >= 272.15)), pip0.vol_b.dynBal.medium.T=-6.899271337895966e+61) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = -6.89927e+61 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T <= 403.15)), pip0.vol_a.dynBal.medium.T=4.330266635970285e+60) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = 4.33027e+60 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T <= 403.15)), splPip2.vol.dynBal.medium.T=1.271964548999574e+37) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = 1.27196e+37 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T <= 403.15)), splPip1.vol.dynBal.medium.T=5.242763513153124e+39) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = 5.24276e+39 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T <= 403.15)), splPip1.vol.dynBal.medium.T=5.242763513153124e+39) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = 5.24276e+39 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T <= 403.15)), splPip2.vol.dynBal.medium.T=1.271964548999574e+37) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = 1.27196e+37 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T <= 403.15)), pip0.vol_a.dynBal.medium.T=4.330266635970285e+60) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = 4.33027e+60 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T >= 272.15)), pip0.vol_b.dynBal.medium.T=-6.899271337895966e+61) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = -6.89927e+61 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T >= 272.15)), pip3.vol_a.dynBal.medium.T=-1.335630381966076e+34) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = -1.33563e+34 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T <= 403.15)), pip3.vol_b.dynBal.medium.T=2.801960446807551e+30) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = 2.80196e+30 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T >= 272.15)), pip2.vol_a.dynBal.medium.T=-2.098818946511078e+34) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = -2.09882e+34 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T <= 403.15)), pip2.vol_b.dynBal.medium.T=3.950236048732e+31) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = 3.95024e+31 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T >= 272.15)), pip5.vol_a.dynBal.medium.T=-2.50567992482073e+37) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = -2.50568e+37 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T >= 272.15)), pip5.vol_b.dynBal.medium.T=-2.781129779452474e+38) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = -2.78113e+38 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T >= 272.15)), pip4.vol_a.dynBal.medium.T=-4.434024238607952e+36) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = -4.43402e+36 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(pip4.vol_b.dynBal.medium.T >= 272.15)), pip4.vol_b.dynBal.medium.T=-1.578195036690864e+29) --> "In GroundCouplingAIT.pip4.vol_b.dynBal.medium: Temperature T = -1.5782e+29 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T <= 403.15)), pip1.vol_a.dynBal.medium.T=5.531864724024578e+58) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = 5.53186e+58 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(pip1.vol_b.dynBal.medium.T >= 272.15)), pip1.vol_b.dynBal.medium.T=-2.583652779698405e+41) --> "In GroundCouplingAIT.pip1.vol_b.dynBal.medium: Temperature T = -2.58365e+41 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T <= 403.15)), splPip1.vol.dynBal.medium.T=5.242763513153124e+39) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = 5.24276e+39 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T <= 403.15)), splPip2.vol.dynBal.medium.T=1.271964548999574e+37) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = 1.27196e+37 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T <= 403.15)), pip0.vol_a.dynBal.medium.T=4.330266635970285e+60) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = 4.33027e+60 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T >= 272.15)), pip0.vol_b.dynBal.medium.T=-6.899271337895966e+61) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = -6.89927e+61 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T >= 272.15)), pip3.vol_a.dynBal.medium.T=-1.335630381966076e+34) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = -1.33563e+34 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T <= 403.15)), pip3.vol_b.dynBal.medium.T=2.801960446807551e+30) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = 2.80196e+30 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T >= 272.15)), pip2.vol_a.dynBal.medium.T=-2.098818946511078e+34) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = -2.09882e+34 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T <= 403.15)), pip2.vol_b.dynBal.medium.T=3.950236048732e+31) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = 3.95024e+31 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T >= 272.15)), pip5.vol_a.dynBal.medium.T=-2.50567992482073e+37) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = -2.50568e+37 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T >= 272.15)), pip5.vol_b.dynBal.medium.T=-2.781129779452474e+38) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = -2.78113e+38 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T >= 272.15)), pip4.vol_a.dynBal.medium.T=-4.434024238607952e+36) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = -4.43402e+36 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(pip4.vol_b.dynBal.medium.T >= 272.15)), pip4.vol_b.dynBal.medium.T=-1.578195036690864e+29) --> "In GroundCouplingAIT.pip4.vol_b.dynBal.medium: Temperature T = -1.5782e+29 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T <= 403.15)), pip1.vol_a.dynBal.medium.T=5.531864724024578e+58) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = 5.53186e+58 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(pip1.vol_b.dynBal.medium.T >= 272.15)), pip1.vol_b.dynBal.medium.T=-2.583652779698405e+41) --> "In GroundCouplingAIT.pip1.vol_b.dynBal.medium: Temperature T = -2.58365e+41 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T <= 403.15)), splPip1.vol.dynBal.medium.T=5.242763513153124e+39) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = 5.24276e+39 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T <= 403.15)), splPip2.vol.dynBal.medium.T=1.271964548999574e+37) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = 1.27196e+37 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T <= 403.15)), pip0.vol_a.dynBal.medium.T=4.330266635970285e+60) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = 4.33027e+60 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T >= 272.15)), pip0.vol_b.dynBal.medium.T=-6.899271337895966e+61) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = -6.89927e+61 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T >= 272.15)), pip3.vol_a.dynBal.medium.T=-1.335630381966076e+34) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = -1.33563e+34 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T <= 403.15)), pip3.vol_b.dynBal.medium.T=2.801960446807551e+30) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = 2.80196e+30 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T >= 272.15)), pip2.vol_a.dynBal.medium.T=-2.098818946511078e+34) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = -2.09882e+34 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T <= 403.15)), pip2.vol_b.dynBal.medium.T=3.950236048732e+31) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = 3.95024e+31 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T >= 272.15)), pip5.vol_a.dynBal.medium.T=-2.50567992482073e+37) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = -2.50568e+37 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T >= 272.15)), pip5.vol_b.dynBal.medium.T=-2.781129779452474e+38) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = -2.78113e+38 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T >= 272.15)), pip4.vol_a.dynBal.medium.T=-4.434024238607952e+36) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = -4.43402e+36 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(pip4.vol_b.dynBal.medium.T >= 272.15)), pip4.vol_b.dynBal.medium.T=-1.578195036690864e+29) --> "In GroundCouplingAIT.pip4.vol_b.dynBal.medium: Temperature T = -1.5782e+29 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T <= 403.15)), pip1.vol_a.dynBal.medium.T=5.531864724024578e+58) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = 5.53186e+58 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(pip1.vol_b.dynBal.medium.T >= 272.15)), pip1.vol_b.dynBal.medium.T=-2.583652779698405e+41) --> "In GroundCouplingAIT.pip1.vol_b.dynBal.medium: Temperature T = -2.58365e+41 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T <= 403.15)), splPip1.vol.dynBal.medium.T=5.242763513153124e+39) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = 5.24276e+39 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T <= 403.15)), splPip2.vol.dynBal.medium.T=1.271964548999574e+37) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = 1.27196e+37 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T <= 403.15)), pip0.vol_a.dynBal.medium.T=4.330266635970285e+60) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = 4.33027e+60 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T >= 272.15)), pip0.vol_b.dynBal.medium.T=-6.899271337895966e+61) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = -6.89927e+61 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T >= 272.15)), pip3.vol_a.dynBal.medium.T=-1.335630381966076e+34) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = -1.33563e+34 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T <= 403.15)), pip3.vol_b.dynBal.medium.T=2.801960446807551e+30) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = 2.80196e+30 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T >= 272.15)), pip2.vol_a.dynBal.medium.T=-2.098818946511078e+34) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = -2.09882e+34 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T <= 403.15)), pip2.vol_b.dynBal.medium.T=3.950236048732e+31) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = 3.95024e+31 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T >= 272.15)), pip5.vol_a.dynBal.medium.T=-2.50567992482073e+37) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = -2.50568e+37 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T >= 272.15)), pip5.vol_b.dynBal.medium.T=-2.781129779452474e+38) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = -2.78113e+38 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T >= 272.15)), pip4.vol_a.dynBal.medium.T=-4.434024238607952e+36) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = -4.43402e+36 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(pip4.vol_b.dynBal.medium.T >= 272.15)), pip4.vol_b.dynBal.medium.T=-1.578195036690864e+29) --> "In GroundCouplingAIT.pip4.vol_b.dynBal.medium: Temperature T = -1.5782e+29 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T <= 403.15)), pip1.vol_a.dynBal.medium.T=5.531864724024578e+58) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = 5.53186e+58 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 15300.000000 | | | | ((noEvent(pip1.vol_b.dynBal.medium.T >= 272.15)), pip1.vol_b.dynBal.medium.T=-2.583652779698405e+41) --> "In GroundCouplingAIT.pip1.vol_b.dynBal.medium: Temperature T = -2.58365e+41 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | Found event, previous asserts are ignored. LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(pip1.vol_b.dynBal.medium.T <= 403.15)), pip1.vol_b.dynBal.medium.T=7.904445352954797e+44) --> "In GroundCouplingAIT.pip1.vol_b.dynBal.medium: Temperature T = 7.90445e+44 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T >= 272.15)), pip1.vol_a.dynBal.medium.T=-1.823307994796605e+62) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = -1.82331e+62 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(pip4.vol_b.dynBal.medium.T <= 403.15)), pip4.vol_b.dynBal.medium.T=3.856679229436339e+32) --> "In GroundCouplingAIT.pip4.vol_b.dynBal.medium: Temperature T = 3.85668e+32 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T <= 403.15)), pip4.vol_a.dynBal.medium.T=1.221712474846071e+40) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = 1.22171e+40 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T <= 403.15)), pip5.vol_b.dynBal.medium.T=1.43340129017544e+42) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = 1.4334e+42 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T <= 403.15)), pip5.vol_a.dynBal.medium.T=7.365236891978137e+40) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = 7.36524e+40 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T >= 272.15)), pip2.vol_b.dynBal.medium.T=-7.063927381861794e+34) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = -7.06393e+34 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T <= 403.15)), pip2.vol_a.dynBal.medium.T=9.674211541491589e+37) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = 9.67421e+37 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T >= 272.15)), pip3.vol_b.dynBal.medium.T=-1.0465518631511e+34) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = -1.04655e+34 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T <= 403.15)), pip3.vol_a.dynBal.medium.T=6.994355394382367e+37) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = 6.99436e+37 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T <= 403.15)), pip0.vol_b.dynBal.medium.T=2.108517143999588e+65) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = 2.10852e+65 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T >= 272.15)), pip0.vol_a.dynBal.medium.T=-1.245539593672326e+64) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = -1.24554e+64 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T >= 272.15)), splPip2.vol.dynBal.medium.T=-1.115525309442334e+40) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = -1.11553e+40 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T >= 272.15)), splPip1.vol.dynBal.medium.T=-1.098721256632768e+43) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = -1.09872e+43 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T >= 272.15)), splPip1.vol.dynBal.medium.T=-1.098721256632768e+43) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = -1.09872e+43 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T >= 272.15)), splPip2.vol.dynBal.medium.T=-1.115525309442334e+40) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = -1.11553e+40 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T >= 272.15)), pip0.vol_a.dynBal.medium.T=-1.245539593672326e+64) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = -1.24554e+64 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T <= 403.15)), pip0.vol_b.dynBal.medium.T=2.108517143999588e+65) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = 2.10852e+65 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T <= 403.15)), pip3.vol_a.dynBal.medium.T=6.994355394382367e+37) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = 6.99436e+37 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T >= 272.15)), pip3.vol_b.dynBal.medium.T=-1.0465518631511e+34) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = -1.04655e+34 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T <= 403.15)), pip2.vol_a.dynBal.medium.T=9.674211541491589e+37) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = 9.67421e+37 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T >= 272.15)), pip2.vol_b.dynBal.medium.T=-7.063927381861794e+34) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = -7.06393e+34 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T <= 403.15)), pip5.vol_a.dynBal.medium.T=7.365236891978137e+40) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = 7.36524e+40 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T <= 403.15)), pip5.vol_b.dynBal.medium.T=1.43340129017544e+42) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = 1.4334e+42 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T <= 403.15)), pip4.vol_a.dynBal.medium.T=1.221712474846071e+40) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = 1.22171e+40 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(pip4.vol_b.dynBal.medium.T <= 403.15)), pip4.vol_b.dynBal.medium.T=3.856679229436339e+32) --> "In GroundCouplingAIT.pip4.vol_b.dynBal.medium: Temperature T = 3.85668e+32 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T >= 272.15)), pip1.vol_a.dynBal.medium.T=-1.823307994796605e+62) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = -1.82331e+62 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(pip1.vol_b.dynBal.medium.T <= 403.15)), pip1.vol_b.dynBal.medium.T=7.904445352954797e+44) --> "In GroundCouplingAIT.pip1.vol_b.dynBal.medium: Temperature T = 7.90445e+44 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T >= 272.15)), splPip1.vol.dynBal.medium.T=-1.098721256632768e+43) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = -1.09872e+43 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T >= 272.15)), splPip2.vol.dynBal.medium.T=-1.115525309442334e+40) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = -1.11553e+40 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T >= 272.15)), pip0.vol_a.dynBal.medium.T=-1.245539593672326e+64) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = -1.24554e+64 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T <= 403.15)), pip0.vol_b.dynBal.medium.T=2.108517143999588e+65) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = 2.10852e+65 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T <= 403.15)), pip3.vol_a.dynBal.medium.T=6.994355394382367e+37) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = 6.99436e+37 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T >= 272.15)), pip3.vol_b.dynBal.medium.T=-1.0465518631511e+34) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = -1.04655e+34 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T <= 403.15)), pip2.vol_a.dynBal.medium.T=9.674211541491589e+37) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = 9.67421e+37 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T >= 272.15)), pip2.vol_b.dynBal.medium.T=-7.063927381861794e+34) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = -7.06393e+34 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T <= 403.15)), pip5.vol_a.dynBal.medium.T=7.365236891978137e+40) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = 7.36524e+40 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T <= 403.15)), pip5.vol_b.dynBal.medium.T=1.43340129017544e+42) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = 1.4334e+42 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T <= 403.15)), pip4.vol_a.dynBal.medium.T=1.221712474846071e+40) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = 1.22171e+40 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(pip4.vol_b.dynBal.medium.T <= 403.15)), pip4.vol_b.dynBal.medium.T=3.856679229436339e+32) --> "In GroundCouplingAIT.pip4.vol_b.dynBal.medium: Temperature T = 3.85668e+32 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T >= 272.15)), pip1.vol_a.dynBal.medium.T=-1.823307994796605e+62) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = -1.82331e+62 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(pip1.vol_b.dynBal.medium.T <= 403.15)), pip1.vol_b.dynBal.medium.T=7.904445352954797e+44) --> "In GroundCouplingAIT.pip1.vol_b.dynBal.medium: Temperature T = 7.90445e+44 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T >= 272.15)), splPip1.vol.dynBal.medium.T=-1.098721256632768e+43) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = -1.09872e+43 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T >= 272.15)), splPip2.vol.dynBal.medium.T=-1.115525309442334e+40) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = -1.11553e+40 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T >= 272.15)), pip0.vol_a.dynBal.medium.T=-1.245539593672326e+64) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = -1.24554e+64 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T <= 403.15)), pip0.vol_b.dynBal.medium.T=2.108517143999588e+65) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = 2.10852e+65 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T <= 403.15)), pip3.vol_a.dynBal.medium.T=6.994355394382367e+37) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = 6.99436e+37 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T >= 272.15)), pip3.vol_b.dynBal.medium.T=-1.0465518631511e+34) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = -1.04655e+34 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T <= 403.15)), pip2.vol_a.dynBal.medium.T=9.674211541491589e+37) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = 9.67421e+37 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T >= 272.15)), pip2.vol_b.dynBal.medium.T=-7.063927381861794e+34) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = -7.06393e+34 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T <= 403.15)), pip5.vol_a.dynBal.medium.T=7.365236891978137e+40) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = 7.36524e+40 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T <= 403.15)), pip5.vol_b.dynBal.medium.T=1.43340129017544e+42) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = 1.4334e+42 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T <= 403.15)), pip4.vol_a.dynBal.medium.T=1.221712474846071e+40) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = 1.22171e+40 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(pip4.vol_b.dynBal.medium.T <= 403.15)), pip4.vol_b.dynBal.medium.T=3.856679229436339e+32) --> "In GroundCouplingAIT.pip4.vol_b.dynBal.medium: Temperature T = 3.85668e+32 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T >= 272.15)), pip1.vol_a.dynBal.medium.T=-1.823307994796605e+62) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = -1.82331e+62 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(pip1.vol_b.dynBal.medium.T <= 403.15)), pip1.vol_b.dynBal.medium.T=7.904445352954797e+44) --> "In GroundCouplingAIT.pip1.vol_b.dynBal.medium: Temperature T = 7.90445e+44 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T >= 272.15)), splPip1.vol.dynBal.medium.T=-1.098721256632768e+43) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = -1.09872e+43 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T >= 272.15)), splPip2.vol.dynBal.medium.T=-1.115525309442334e+40) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = -1.11553e+40 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T >= 272.15)), pip0.vol_a.dynBal.medium.T=-1.245539593672326e+64) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = -1.24554e+64 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T <= 403.15)), pip0.vol_b.dynBal.medium.T=2.108517143999588e+65) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = 2.10852e+65 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T <= 403.15)), pip3.vol_a.dynBal.medium.T=6.994355394382367e+37) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = 6.99436e+37 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T >= 272.15)), pip3.vol_b.dynBal.medium.T=-1.0465518631511e+34) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = -1.04655e+34 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T <= 403.15)), pip2.vol_a.dynBal.medium.T=9.674211541491589e+37) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = 9.67421e+37 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T >= 272.15)), pip2.vol_b.dynBal.medium.T=-7.063927381861794e+34) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = -7.06393e+34 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T <= 403.15)), pip5.vol_a.dynBal.medium.T=7.365236891978137e+40) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = 7.36524e+40 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T <= 403.15)), pip5.vol_b.dynBal.medium.T=1.43340129017544e+42) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = 1.4334e+42 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T <= 403.15)), pip4.vol_a.dynBal.medium.T=1.221712474846071e+40) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = 1.22171e+40 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(pip4.vol_b.dynBal.medium.T <= 403.15)), pip4.vol_b.dynBal.medium.T=3.856679229436339e+32) --> "In GroundCouplingAIT.pip4.vol_b.dynBal.medium: Temperature T = 3.85668e+32 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T >= 272.15)), pip1.vol_a.dynBal.medium.T=-1.823307994796605e+62) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = -1.82331e+62 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 16200.000000 | | | | ((noEvent(pip1.vol_b.dynBal.medium.T <= 403.15)), pip1.vol_b.dynBal.medium.T=7.904445352954797e+44) --> "In GroundCouplingAIT.pip1.vol_b.dynBal.medium: Temperature T = 7.90445e+44 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | Found event, previous asserts are ignored. LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 17100.000000 | | | | ((noEvent(pip1.vol_b.dynBal.medium.T >= 272.15)), pip1.vol_b.dynBal.medium.T=-2.362104754661225e+48) --> "In GroundCouplingAIT.pip1.vol_b.dynBal.medium: Temperature T = -2.3621e+48 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 17100.000000 | | | | ((noEvent(pip1.vol_a.dynBal.medium.T <= 403.15)), pip1.vol_a.dynBal.medium.T=5.492304596239933e+65) --> "In GroundCouplingAIT.pip1.vol_a.dynBal.medium: Temperature T = 5.4923e+65 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 17100.000000 | | | | ((noEvent(pip4.vol_b.dynBal.medium.T >= 272.15)), pip4.vol_b.dynBal.medium.T=-2.674546502768813e+36) --> "In GroundCouplingAIT.pip4.vol_b.dynBal.medium: Temperature T = -2.67455e+36 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 17100.000000 | | | | ((noEvent(pip4.vol_a.dynBal.medium.T >= 272.15)), pip4.vol_a.dynBal.medium.T=-2.560720647760429e+43) --> "In GroundCouplingAIT.pip4.vol_a.dynBal.medium: Temperature T = -2.56072e+43 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 17100.000000 | | | | ((noEvent(pip5.vol_b.dynBal.medium.T >= 272.15)), pip5.vol_b.dynBal.medium.T=-3.975958164608083e+45) --> "In GroundCouplingAIT.pip5.vol_b.dynBal.medium: Temperature T = -3.97596e+45 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 17100.000000 | | | | ((noEvent(pip5.vol_a.dynBal.medium.T >= 272.15)), pip5.vol_a.dynBal.medium.T=-1.522099547450912e+44) --> "In GroundCouplingAIT.pip5.vol_a.dynBal.medium: Temperature T = -1.5221e+44 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 17100.000000 | | | | ((noEvent(pip2.vol_b.dynBal.medium.T <= 403.15)), pip2.vol_b.dynBal.medium.T=3.303274502329229e+38) --> "In GroundCouplingAIT.pip2.vol_b.dynBal.medium: Temperature T = 3.30327e+38 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 17100.000000 | | | | ((noEvent(pip2.vol_a.dynBal.medium.T >= 272.15)), pip2.vol_a.dynBal.medium.T=-8.354215027850168e+40) --> "In GroundCouplingAIT.pip2.vol_a.dynBal.medium: Temperature T = -8.35422e+40 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 17100.000000 | | | | ((noEvent(pip3.vol_b.dynBal.medium.T <= 403.15)), pip3.vol_b.dynBal.medium.T=1.007852209454159e+38) --> "In GroundCouplingAIT.pip3.vol_b.dynBal.medium: Temperature T = 1.00785e+38 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 17100.000000 | | | | ((noEvent(pip3.vol_a.dynBal.medium.T >= 272.15)), pip3.vol_a.dynBal.medium.T=-6.160287226419184e+40) --> "In GroundCouplingAIT.pip3.vol_a.dynBal.medium: Temperature T = -6.16029e+40 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:63:5-64:122:writable] | | | | The following assertion has been violated at time 17100.000000 | | | | ((noEvent(pip0.vol_b.dynBal.medium.T >= 272.15)), pip0.vol_b.dynBal.medium.T=-6.503088965233379e+68) --> "In GroundCouplingAIT.pip0.vol_b.dynBal.medium: Temperature T = -6.50309e+68 K exceeded its minimum allowed value of -1 degC (272.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 17100.000000 | | | | ((noEvent(pip0.vol_a.dynBal.medium.T <= 403.15)), pip0.vol_a.dynBal.medium.T=3.628074105935244e+67) --> "In GroundCouplingAIT.pip0.vol_a.dynBal.medium: Temperature T = 3.62807e+67 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 17100.000000 | | | | ((noEvent(splPip2.vol.dynBal.medium.T <= 403.15)), splPip2.vol.dynBal.medium.T=5.459308208250643e+43) --> "In GroundCouplingAIT.splPip2.vol.dynBal.medium: Temperature T = 5.45931e+43 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 12.1.3-maint.12.x/Media/Water.mo:66:5-67:122:writable] | | | | The following assertion has been violated at time 17100.000000 | | | | ((noEvent(splPip1.vol.dynBal.medium.T <= 403.15)), splPip1.vol.dynBal.medium.T=3.292785762455396e+46) --> "In GroundCouplingAIT.splPip1.vol.dynBal.medium: Temperature T = 3.29279e+46 K exceeded its maximum allowed value of 130 degC (403.15 Kelvin) as required from medium model "Buildings.Media.Water"." LOG_ASSERT | debug | Solving non-linear system 1493 failed at time=17100. | | | | For more information please use -lv LOG_NLS. error: [stepUntil] fmi2_doStep failed for FMU "GroundCouplingAIT.root.GroundCouplingAIT" Traceback (most recent call last): File "", line 198, in _run_module_as_main File "", line 88, in _run_code File "/home/hudson/saved_omc/OMSimulator/install/lib/x86_64-linux-gnu/OMSimulator/__main__.py", line 38, in sys.exit(main()) ~~~~^^ File "/home/hudson/saved_omc/OMSimulator/install/lib/x86_64-linux-gnu/OMSimulator/cli.py", line 309, in main handler(args.model, args) ~~~~~~~^^^^^^^^^^^^^^^^^^ File "/home/hudson/saved_omc/OMSimulator/install/lib/x86_64-linux-gnu/OMSimulator/cli.py", line 176, in _runFMU fmu.simulate() ~~~~~~~~~~~~^^ File "/home/hudson/saved_omc/OMSimulator/install/lib/x86_64-linux-gnu/OMSimulator/fmu.py", line 917, in simulate raise RuntimeError(f"Failed to simulate model: {status}") RuntimeError: Failed to simulate model: Status.error info: 0 warnings info: 1 errors