(cd run_OMSimulator-cs-euler && /home/hudson/saved_omc/OMSimulator/install/bin/OMSimulator  --stripRoot --tempDir=temp_BuildingSystems_BuildingSystems_Buildings_Examples_BuildingThermal1Zone1DCylinder_OMSimulator-cs-euler_fmu --startTime=0 --stopTime=3.1536e+07 --stepSize=12614.4 --mode=cs --timeout=240 --tolerance=1e-06 ../BuildingSystems_BuildingSystems_Buildings_Examples_BuildingThermal1Zone1DCylinder_OMSimulator-cs-euler.fmu)
info: *** FMU Simulation Info ***
     - model     : BuildingSystems.Buildings.Examples.BuildingThermal1Zone1DCylinder (co-simulation)
     - fmiVersion: 2.0
     - startTime : 0.000000
     - stopTime  : 31536000.000000
     - tolerance : 1e-06
     - stepSize  : 12614.4
LOG_STDOUT        | info    | ... loading "tab1" from "/tmp/tmpujdmfzcy/BuildingThermal1Zone1DCylinder-wlrw69pf/temp/0001_BuildingThermal1Zone1DCylinder/resources/home/hudson/saved_omc/libraries/.openmodelica/libraries/BuildingSystems 2.0.0-master/Climate/weather/Germany_Berlin.txt"
info:    Result file: BuildingSystems_BuildingSystems_Buildings_Examples_BuildingThermal1Zone1DCylinder_OMSimulator-cs-euler_res.mat (bufferSize=10)
info:    Parameter BuildingThermal1Zone1DCylinder.ambience.weatherDataReader.weatherData.datRea.delimiter will not be stored in the result file, because the signal type is not supported
info:    Variable BuildingThermal1Zone1DCylinder.ambience.weatherDataReader.weatherData.datRea.tableName will not be stored in the result file, because the signal type is not supported
info:    Parameter BuildingThermal1Zone1DCylinder.ambience.weatherDataReader.weatherData.filNam will not be stored in the result file, because the signal type is not supported
info:    Parameter BuildingThermal1Zone1DCylinder.ambience.weatherDataReader.weatherData.info will not be stored in the result file, because the signal type is not supported
info:    Variable BuildingThermal1Zone1DCylinder.ambience.weatherDataReader.weatherData.tabNam will not be stored in the result file, because the signal type is not supported
info:    Parameter BuildingThermal1Zone1DCylinder.building.bottom.construction.layer[1].material.name will not be stored in the result file, because the signal type is not supported
info:    Parameter BuildingThermal1Zone1DCylinder.building.bottom.construction.layer[2].material.name will not be stored in the result file, because the signal type is not supported
info:    Parameter BuildingThermal1Zone1DCylinder.building.bottom.construction.material[1].name will not be stored in the result file, because the signal type is not supported
info:    Parameter BuildingThermal1Zone1DCylinder.building.bottom.construction.material[2].name will not be stored in the result file, because the signal type is not supported
info:    Parameter BuildingThermal1Zone1DCylinder.building.bottom.constructionData.material[1].name will not be stored in the result file, because the signal type is not supported
info:    Parameter BuildingThermal1Zone1DCylinder.building.bottom.constructionData.material[2].name will not be stored in the result file, because the signal type is not supported
info:    Parameter BuildingThermal1Zone1DCylinder.building.ceiling.construction.layer[1].material.name will not be stored in the result file, because the signal type is not supported
info:    Parameter BuildingThermal1Zone1DCylinder.building.ceiling.construction.layer[2].material.name will not be stored in the result file, because the signal type is not supported
info:    Parameter BuildingThermal1Zone1DCylinder.building.ceiling.construction.material[1].name will not be stored in the result file, because the signal type is not supported
info:    Parameter BuildingThermal1Zone1DCylinder.building.ceiling.construction.material[2].name will not be stored in the result file, because the signal type is not supported
info:    Parameter BuildingThermal1Zone1DCylinder.building.ceiling.constructionData.material[1].name will not be stored in the result file, because the signal type is not supported
info:    Parameter BuildingThermal1Zone1DCylinder.building.ceiling.constructionData.material[2].name will not be stored in the result file, because the signal type is not supported
info:    Parameter BuildingThermal1Zone1DCylinder.building.constructionBottom.material[1].name will not be stored in the result file, because the signal type is not supported
info:    Parameter BuildingThermal1Zone1DCylinder.building.constructionBottom.material[2].name will not be stored in the result file, because the signal type is not supported
info:    Parameter BuildingThermal1Zone1DCylinder.building.constructionCeiling.material[1].name will not be stored in the result file, because the signal type is not supported
info:    Parameter BuildingThermal1Zone1DCylinder.building.constructionCeiling.material[2].name will not be stored in the result file, because the signal type is not supported
info:    Parameter BuildingThermal1Zone1DCylinder.building.constructionWall.material[1].name will not be stored in the result file, because the signal type is not supported
info:    Parameter BuildingThermal1Zone1DCylinder.building.constructionWall.material[2].name will not be stored in the result file, because the signal type is not supported
info:    Parameter BuildingThermal1Zone1DCylinder.building.wall[1].construction.layer[1].material.name will not be stored in the result file, because the signal type is not supported
info:    Parameter BuildingThermal1Zone1DCylinder.building.wall[1].construction.layer[2].material.name will not be stored in the result file, because the signal type is not supported
info:    Parameter BuildingThermal1Zone1DCylinder.building.wall[2].construction.layer[1].material.name will not be stored in the result file, because the signal type is not supported
info:    Parameter BuildingThermal1Zone1DCylinder.building.wall[2].construction.layer[2].material.name will not be stored in the result file, because the signal type is not supported
info:    Parameter BuildingThermal1Zone1DCylinder.building.wall[3].construction.layer[1].material.name will not be stored in the result file, because the signal type is not supported
info:    Parameter BuildingThermal1Zone1DCylinder.building.wall[3].construction.layer[2].material.name will not be stored in the result file, because the signal type is not supported
info:    Parameter BuildingThermal1Zone1DCylinder.building.wall[4].construction.layer[1].material.name will not be stored in the result file, because the signal type is not supported
info:    Parameter BuildingThermal1Zone1DCylinder.building.wall[4].construction.layer[2].material.name will not be stored in the result file, because the signal type is not supported
info:    Parameter BuildingThermal1Zone1DCylinder.building.wall[5].construction.layer[1].material.name will not be stored in the result file, because the signal type is not supported
info:    Parameter BuildingThermal1Zone1DCylinder.building.wall[5].construction.layer[2].material.name will not be stored in the result file, because the signal type is not supported
info:    Parameter BuildingThermal1Zone1DCylinder.building.wall[6].construction.layer[1].material.name will not be stored in the result file, because the signal type is not supported
info:    Parameter BuildingThermal1Zone1DCylinder.building.wall[6].construction.layer[2].material.name will not be stored in the result file, because the signal type is not supported
info:    Parameter BuildingThermal1Zone1DCylinder.building.wall[1].construction.material[1].name will not be stored in the result file, because the signal type is not supported
info:    Parameter BuildingThermal1Zone1DCylinder.building.wall[1].construction.material[2].name will not be stored in the result file, because the signal type is not supported
info:    Parameter BuildingThermal1Zone1DCylinder.building.wall[2].construction.material[1].name will not be stored in the result file, because the signal type is not supported
info:    Parameter BuildingThermal1Zone1DCylinder.building.wall[2].construction.material[2].name will not be stored in the result file, because the signal type is not supported
info:    Parameter BuildingThermal1Zone1DCylinder.building.wall[3].construction.material[1].name will not be stored in the result file, because the signal type is not supported
info:    Parameter BuildingThermal1Zone1DCylinder.building.wall[3].construction.material[2].name will not be stored in the result file, because the signal type is not supported
info:    Parameter BuildingThermal1Zone1DCylinder.building.wall[4].construction.material[1].name will not be stored in the result file, because the signal type is not supported
info:    Parameter BuildingThermal1Zone1DCylinder.building.wall[4].construction.material[2].name will not be stored in the result file, because the signal type is not supported
info:    Parameter BuildingThermal1Zone1DCylinder.building.wall[5].construction.material[1].name will not be stored in the result file, because the signal type is not supported
info:    Parameter BuildingThermal1Zone1DCylinder.building.wall[5].construction.material[2].name will not be stored in the result file, because the signal type is not supported
info:    Parameter BuildingThermal1Zone1DCylinder.building.wall[6].construction.material[1].name will not be stored in the result file, because the signal type is not supported
info:    Parameter BuildingThermal1Zone1DCylinder.building.wall[6].construction.material[2].name will not be stored in the result file, because the signal type is not supported
info:    Parameter BuildingThermal1Zone1DCylinder.building.wall[1].constructionData.material[1].name will not be stored in the result file, because the signal type is not supported
info:    Parameter BuildingThermal1Zone1DCylinder.building.wall[1].constructionData.material[2].name will not be stored in the result file, because the signal type is not supported
info:    Parameter BuildingThermal1Zone1DCylinder.building.wall[2].constructionData.material[1].name will not be stored in the result file, because the signal type is not supported
info:    Parameter BuildingThermal1Zone1DCylinder.building.wall[2].constructionData.material[2].name will not be stored in the result file, because the signal type is not supported
info:    Parameter BuildingThermal1Zone1DCylinder.building.wall[3].constructionData.material[1].name will not be stored in the result file, because the signal type is not supported
info:    Parameter BuildingThermal1Zone1DCylinder.building.wall[3].constructionData.material[2].name will not be stored in the result file, because the signal type is not supported
info:    Parameter BuildingThermal1Zone1DCylinder.building.wall[4].constructionData.material[1].name will not be stored in the result file, because the signal type is not supported
info:    Parameter BuildingThermal1Zone1DCylinder.building.wall[4].constructionData.material[2].name will not be stored in the result file, because the signal type is not supported
info:    Parameter BuildingThermal1Zone1DCylinder.building.wall[5].constructionData.material[1].name will not be stored in the result file, because the signal type is not supported
info:    Parameter BuildingThermal1Zone1DCylinder.building.wall[5].constructionData.material[2].name will not be stored in the result file, because the signal type is not supported
info:    Parameter BuildingThermal1Zone1DCylinder.building.wall[6].constructionData.material[1].name will not be stored in the result file, because the signal type is not supported
info:    Parameter BuildingThermal1Zone1DCylinder.building.wall[6].constructionData.material[2].name will not be stored in the result file, because the signal type is not supported
LOG_ASSERT        | debug   | Solving non-linear system 2489 failed at time=12614.4.
|                 | |       | For more information please use -lv LOG_NLS.
error:   [stepUntil] fmi2_doStep failed for FMU "BuildingThermal1Zone1DCylinder.root.BuildingThermal1Zone1DCylinder"
Traceback (most recent call last):
  File "<frozen runpy>", line 198, in _run_module_as_main
  File "<frozen runpy>", line 88, in _run_code
  File "/home/hudson/saved_omc/OMSimulator/install/lib/x86_64-linux-gnu/OMSimulator/__main__.py", line 38, in <module>
    sys.exit(main())
             ~~~~^^
  File "/home/hudson/saved_omc/OMSimulator/install/lib/x86_64-linux-gnu/OMSimulator/cli.py", line 309, in main
    handler(args.model, args)
    ~~~~~~~^^^^^^^^^^^^^^^^^^
  File "/home/hudson/saved_omc/OMSimulator/install/lib/x86_64-linux-gnu/OMSimulator/cli.py", line 176, in _runFMU
    fmu.simulate()
    ~~~~~~~~~~~~^^
  File "/home/hudson/saved_omc/OMSimulator/install/lib/x86_64-linux-gnu/OMSimulator/fmu.py", line 906, in simulate
    raise RuntimeError(f"Failed to simulate model: {status}")
RuntimeError: Failed to simulate model: Status.error
info:    0 warnings
info:    1 errors