(cd run_OMSimulator-cs-cvode && /home/hudson/saved_omc/OMSimulator/install/bin/OMSimulator --resultFile=../ClaRa_dev_ClaRa.Examples.VapourCycle_01_OMSimulator-cs-cvode_res.mat --stripRoot --tempDir=temp_ClaRa_dev_ClaRa_Examples_VapourCycle_01_OMSimulator-cs-cvode_fmu --startTime=0 --stopTime=10000 --stepSize=4 --mode=cs --timeout=240 --tolerance=1e-05 ../ClaRa_dev_ClaRa_Examples_VapourCycle_01_OMSimulator-cs-cvode.fmu) LOG_SOLVER | info | CVODE linear multistep method CV_BDF LOG_SOLVER | info | CVODE maximum integration order CV_ITER_NEWTON LOG_SOLVER | info | CVODE use equidistant time grid YES LOG_SOLVER | info | CVODE Using relative error tolerance 1.000000e-05 LOG_SOLVER | info | CVODE Using sparse linear solver SUNLinSol_KLU. LOG_SOLVER | info | CVODE Use sparse Jacobian method coloredNumerical LOG_SOLVER | info | CVODE uses internal root finding method YES LOG_SOLVER | info | CVODE maximum absolut step size 0 LOG_SOLVER | info | CVODE initial step size is set automatically LOG_SOLVER | info | CVODE maximum integration order 5 LOG_SOLVER | info | CVODE maximum number of nonlinear convergence failures permitted during one step 10 LOG_SOLVER | info | CVODE BDF stability limit detection algorithm ON info: *** FMU Simulation Info *** - model : ClaRa.Examples.VapourCycle_01 (co-simulation) - fmiVersion: 2.0 - startTime : 0.000000 - stopTime : 10000.000000 - tolerance : 1e-05 - stepSize : 4 warning: [fmi2Warning] VapourCycle_01/logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.9.0-ClaRa/BaseClasses/PartialGas_ph.mo:41: The following assertion has been violated at time 0.000000 ((condenser.flow_b.fluid[1].drhodxi_ph[2] >= 0.0), condenser.flow_b.fluid[1].drhodxi_ph[2]=-0.3578996341543276) --> "Variable violating min constraint: 0.0 <= condenser.flow_b.fluid[1].drhodxi_ph[2], has value: -0.3579" warning: [fmi2Warning] VapourCycle_01/logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.9.0-ClaRa/BaseClasses/PartialGas_ph.mo:41: The following assertion has been violated at time 0.000000 ((condenser.flow_b.fluid[1].drhodxi_ph[5] >= 0.0), condenser.flow_b.fluid[1].drhodxi_ph[5]=-0.357734951733386) --> "Variable violating min constraint: 0.0 <= condenser.flow_b.fluid[1].drhodxi_ph[5], has value: -0.357735" warning: [fmi2Warning] VapourCycle_01/logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.9.0-ClaRa/BaseClasses/PartialGas_ph.mo:41: The following assertion has been violated at time 0.000000 ((condenser.flow_b.fluid[1].drhodxi_ph[6] >= 0.0), condenser.flow_b.fluid[1].drhodxi_ph[6]=-0.2104737724930274) --> "Variable violating min constraint: 0.0 <= condenser.flow_b.fluid[1].drhodxi_ph[6], has value: -0.210474" warning: [fmi2Warning] VapourCycle_01/logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.9.0-ClaRa/BaseClasses/PartialGas_ph.mo:41: The following assertion has been violated at time 0.000000 ((condenser.flow_b.fluid[1].drhodxi_ph[8] >= 0.0), condenser.flow_b.fluid[1].drhodxi_ph[8]=-1.019640085322873) --> "Variable violating min constraint: 0.0 <= condenser.flow_b.fluid[1].drhodxi_ph[8], has value: -1.01964" warning: [fmi2Warning] VapourCycle_01/logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.9.0-ClaRa/BaseClasses/PartialGas_ph.mo:41: The following assertion has been violated at time 0.000000 ((condenser.flow_b.fluid[1].drhodxi_ph[9] >= 0.0), condenser.flow_b.fluid[1].drhodxi_ph[9]=-1.128822289389969) --> "Variable violating min constraint: 0.0 <= condenser.flow_b.fluid[1].drhodxi_ph[9], has value: -1.12882" warning: [fmi2Warning] VapourCycle_01/logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.9.0-ClaRa/BaseClasses/PartialGas_ph.mo:41: The following assertion has been violated at time 0.000000 ((condenser.flow_b.fluid[2].drhodxi_ph[2] >= 0.0), condenser.flow_b.fluid[2].drhodxi_ph[2]=-0.3574566900820041) --> "Variable violating min constraint: 0.0 <= condenser.flow_b.fluid[2].drhodxi_ph[2], has value: -0.357457" warning: [fmi2Warning] VapourCycle_01/logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.9.0-ClaRa/BaseClasses/PartialGas_ph.mo:41: The following assertion has been violated at time 0.000000 ((condenser.flow_b.fluid[2].drhodxi_ph[5] >= 0.0), condenser.flow_b.fluid[2].drhodxi_ph[5]=-0.3572922114754711) --> "Variable violating min constraint: 0.0 <= condenser.flow_b.fluid[2].drhodxi_ph[5], has value: -0.357292" warning: [fmi2Warning] VapourCycle_01/logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.9.0-ClaRa/BaseClasses/PartialGas_ph.mo:41: The following assertion has been violated at time 0.000000 ((condenser.flow_b.fluid[2].drhodxi_ph[6] >= 0.0), condenser.flow_b.fluid[2].drhodxi_ph[6]=-0.2102132857503526) --> "Variable violating min constraint: 0.0 <= condenser.flow_b.fluid[2].drhodxi_ph[6], has value: -0.210213" warning: [fmi2Warning] VapourCycle_01/logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.9.0-ClaRa/BaseClasses/PartialGas_ph.mo:41: The following assertion has been violated at time 0.000000 ((condenser.flow_b.fluid[2].drhodxi_ph[8] >= 0.0), condenser.flow_b.fluid[2].drhodxi_ph[8]=-1.018378157428579) --> "Variable violating min constraint: 0.0 <= condenser.flow_b.fluid[2].drhodxi_ph[8], has value: -1.01838" warning: [fmi2Warning] VapourCycle_01/logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.9.0-ClaRa/BaseClasses/PartialGas_ph.mo:41: The following assertion has been violated at time 0.000000 ((condenser.flow_b.fluid[2].drhodxi_ph[9] >= 0.0), condenser.flow_b.fluid[2].drhodxi_ph[9]=-1.12742523531649) --> "Variable violating min constraint: 0.0 <= condenser.flow_b.fluid[2].drhodxi_ph[9], has value: -1.12743" warning: [fmi2Warning] VapourCycle_01/logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.9.0-ClaRa/BaseClasses/PartialGas_ph.mo:41: The following assertion has been violated at time 0.000000 ((condenser.flow_b.fluid[3].drhodxi_ph[2] >= 0.0), condenser.flow_b.fluid[3].drhodxi_ph[2]=-0.3570137460071539) --> "Variable violating min constraint: 0.0 <= condenser.flow_b.fluid[3].drhodxi_ph[2], has value: -0.357014" warning: [fmi2Warning] VapourCycle_01/logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.9.0-ClaRa/BaseClasses/PartialGas_ph.mo:41: The following assertion has been violated at time 0.000000 ((condenser.flow_b.fluid[3].drhodxi_ph[5] >= 0.0), condenser.flow_b.fluid[3].drhodxi_ph[5]=-0.3568494712150302) --> "Variable violating min constraint: 0.0 <= condenser.flow_b.fluid[3].drhodxi_ph[5], has value: -0.356849" warning: [fmi2Warning] VapourCycle_01/logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.9.0-ClaRa/BaseClasses/PartialGas_ph.mo:41: The following assertion has been violated at time 0.000000 ((condenser.flow_b.fluid[3].drhodxi_ph[6] >= 0.0), condenser.flow_b.fluid[3].drhodxi_ph[6]=-0.209952799006192) --> "Variable violating min constraint: 0.0 <= condenser.flow_b.fluid[3].drhodxi_ph[6], has value: -0.209953" warning: [fmi2Warning] VapourCycle_01/logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.9.0-ClaRa/BaseClasses/PartialGas_ph.mo:41: The following assertion has been violated at time 0.000000 ((condenser.flow_b.fluid[3].drhodxi_ph[8] >= 0.0), condenser.flow_b.fluid[3].drhodxi_ph[8]=-1.017116229527086) --> "Variable violating min constraint: 0.0 <= condenser.flow_b.fluid[3].drhodxi_ph[8], has value: -1.01712" warning: [fmi2Warning] VapourCycle_01/logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.9.0-ClaRa/BaseClasses/PartialGas_ph.mo:41: The following assertion has been violated at time 0.000000 ((condenser.flow_b.fluid[3].drhodxi_ph[9] >= 0.0), condenser.flow_b.fluid[3].drhodxi_ph[9]=-1.126028181235042) --> "Variable violating min constraint: 0.0 <= condenser.flow_b.fluid[3].drhodxi_ph[9], has value: -1.12603" warning: [fmi2Warning] VapourCycle_01/logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.9.0-ClaRa/BaseClasses/PartialGas_ph.mo:41: The following assertion has been violated at time 0.000000 ((condenser.flow_b.fluid[4].drhodxi_ph[2] >= 0.0), condenser.flow_b.fluid[4].drhodxi_ph[2]=-0.3565708019297775) --> "Variable violating min constraint: 0.0 <= condenser.flow_b.fluid[4].drhodxi_ph[2], has value: -0.356571" warning: [fmi2Warning] VapourCycle_01/logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.9.0-ClaRa/BaseClasses/PartialGas_ph.mo:41: The following assertion has been violated at time 0.000000 ((condenser.flow_b.fluid[4].drhodxi_ph[5] >= 0.0), condenser.flow_b.fluid[4].drhodxi_ph[5]=-0.3564067309520645) --> "Variable violating min constraint: 0.0 <= condenser.flow_b.fluid[4].drhodxi_ph[5], has value: -0.356407" warning: [fmi2Warning] VapourCycle_01/logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.9.0-ClaRa/BaseClasses/PartialGas_ph.mo:41: The following assertion has been violated at time 0.000000 ((condenser.flow_b.fluid[4].drhodxi_ph[6] >= 0.0), condenser.flow_b.fluid[4].drhodxi_ph[6]=-0.2096923122605455) --> "Variable violating min constraint: 0.0 <= condenser.flow_b.fluid[4].drhodxi_ph[6], has value: -0.209692" warning: [fmi2Warning] VapourCycle_01/logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.9.0-ClaRa/BaseClasses/PartialGas_ph.mo:41: The following assertion has been violated at time 0.000000 ((condenser.flow_b.fluid[4].drhodxi_ph[8] >= 0.0), condenser.flow_b.fluid[4].drhodxi_ph[8]=-1.015854301618395) --> "Variable violating min constraint: 0.0 <= condenser.flow_b.fluid[4].drhodxi_ph[8], has value: -1.01585" warning: [fmi2Warning] VapourCycle_01/logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.9.0-ClaRa/BaseClasses/PartialGas_ph.mo:41: The following assertion has been violated at time 0.000000 ((condenser.flow_b.fluid[4].drhodxi_ph[9] >= 0.0), condenser.flow_b.fluid[4].drhodxi_ph[9]=-1.124631127145626) --> "Variable violating min constraint: 0.0 <= condenser.flow_b.fluid[4].drhodxi_ph[9], has value: -1.12463" warning: [fmi2Warning] VapourCycle_01/logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.9.0-ClaRa/BaseClasses/PartialGas_ph.mo:41: The following assertion has been violated at time 0.000000 ((condenser.flow_b.fluid[5].drhodxi_ph[2] >= 0.0), condenser.flow_b.fluid[5].drhodxi_ph[2]=-0.3561278578498741) --> "Variable violating min constraint: 0.0 <= condenser.flow_b.fluid[5].drhodxi_ph[2], has value: -0.356128" warning: [fmi2Warning] VapourCycle_01/logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.9.0-ClaRa/BaseClasses/PartialGas_ph.mo:41: The following assertion has been violated at time 0.000000 ((condenser.flow_b.fluid[5].drhodxi_ph[5] >= 0.0), condenser.flow_b.fluid[5].drhodxi_ph[5]=-0.355963990686573) --> "Variable violating min constraint: 0.0 <= condenser.flow_b.fluid[5].drhodxi_ph[5], has value: -0.355964" warning: [fmi2Warning] VapourCycle_01/logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.9.0-ClaRa/BaseClasses/PartialGas_ph.mo:41: The following assertion has been violated at time 0.000000 ((condenser.flow_b.fluid[5].drhodxi_ph[6] >= 0.0), condenser.flow_b.fluid[5].drhodxi_ph[6]=-0.2094318255134133) --> "Variable violating min constraint: 0.0 <= condenser.flow_b.fluid[5].drhodxi_ph[6], has value: -0.209432" warning: [fmi2Warning] VapourCycle_01/logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.9.0-ClaRa/BaseClasses/PartialGas_ph.mo:41: The following assertion has been violated at time 0.000000 ((condenser.flow_b.fluid[5].drhodxi_ph[8] >= 0.0), condenser.flow_b.fluid[5].drhodxi_ph[8]=-1.014592373702506) --> "Variable violating min constraint: 0.0 <= condenser.flow_b.fluid[5].drhodxi_ph[8], has value: -1.01459" warning: [fmi2Warning] VapourCycle_01/logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.9.0-ClaRa/BaseClasses/PartialGas_ph.mo:41: The following assertion has been violated at time 0.000000 ((condenser.flow_b.fluid[5].drhodxi_ph[9] >= 0.0), condenser.flow_b.fluid[5].drhodxi_ph[9]=-1.12323407304824) --> "Variable violating min constraint: 0.0 <= condenser.flow_b.fluid[5].drhodxi_ph[9], has value: -1.12323" warning: [fmi2Warning] VapourCycle_01/logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.9.0-ClaRa/BaseClasses/PartialGas_ph.mo:41: The following assertion has been violated at time 0.000000 ((condenser.flow_b.fluid[6].drhodxi_ph[2] >= 0.0), condenser.flow_b.fluid[6].drhodxi_ph[2]=-0.3556849137674447) --> "Variable violating min constraint: 0.0 <= condenser.flow_b.fluid[6].drhodxi_ph[2], has value: -0.355685" warning: [fmi2Warning] VapourCycle_01/logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.9.0-ClaRa/BaseClasses/PartialGas_ph.mo:41: The following assertion has been violated at time 0.000000 ((condenser.flow_b.fluid[6].drhodxi_ph[5] >= 0.0), condenser.flow_b.fluid[6].drhodxi_ph[5]=-0.3555212504185565) --> "Variable violating min constraint: 0.0 <= condenser.flow_b.fluid[6].drhodxi_ph[5], has value: -0.355521" warning: [fmi2Warning] VapourCycle_01/logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.9.0-ClaRa/BaseClasses/PartialGas_ph.mo:41: The following assertion has been violated at time 0.000000 ((condenser.flow_b.fluid[6].drhodxi_ph[6] >= 0.0), condenser.flow_b.fluid[6].drhodxi_ph[6]=-0.2091713387647954) --> "Variable violating min constraint: 0.0 <= condenser.flow_b.fluid[6].drhodxi_ph[6], has value: -0.209171" warning: [fmi2Warning] VapourCycle_01/logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.9.0-ClaRa/BaseClasses/PartialGas_ph.mo:41: The following assertion has been violated at time 0.000000 ((condenser.flow_b.fluid[6].drhodxi_ph[8] >= 0.0), condenser.flow_b.fluid[6].drhodxi_ph[8]=-1.01333044577942) --> "Variable violating min constraint: 0.0 <= condenser.flow_b.fluid[6].drhodxi_ph[8], has value: -1.01333" warning: [fmi2Warning] VapourCycle_01/logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.9.0-ClaRa/BaseClasses/PartialGas_ph.mo:41: The following assertion has been violated at time 0.000000 ((condenser.flow_b.fluid[6].drhodxi_ph[9] >= 0.0), condenser.flow_b.fluid[6].drhodxi_ph[9]=-1.121837018942887) --> "Variable violating min constraint: 0.0 <= condenser.flow_b.fluid[6].drhodxi_ph[9], has value: -1.12184" warning: [fmi2Warning] VapourCycle_01/logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.9.0-ClaRa/BaseClasses/PartialGas_ph.mo:41: The following assertion has been violated at time 0.000000 ((condenser.flow_b.fluid[7].drhodxi_ph[2] >= 0.0), condenser.flow_b.fluid[7].drhodxi_ph[2]=-0.3552419696824883) --> "Variable violating min constraint: 0.0 <= condenser.flow_b.fluid[7].drhodxi_ph[2], has value: -0.355242" warning: [fmi2Warning] VapourCycle_01/logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.9.0-ClaRa/BaseClasses/PartialGas_ph.mo:41: The following assertion has been violated at time 0.000000 ((condenser.flow_b.fluid[7].drhodxi_ph[5] >= 0.0), condenser.flow_b.fluid[7].drhodxi_ph[5]=-0.3550785101480143) --> "Variable violating min constraint: 0.0 <= condenser.flow_b.fluid[7].drhodxi_ph[5], has value: -0.355079" warning: [fmi2Warning] VapourCycle_01/logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.9.0-ClaRa/BaseClasses/PartialGas_ph.mo:41: The following assertion has been violated at time 0.000000 ((condenser.flow_b.fluid[7].drhodxi_ph[6] >= 0.0), condenser.flow_b.fluid[7].drhodxi_ph[6]=-0.2089108520146916) --> "Variable violating min constraint: 0.0 <= condenser.flow_b.fluid[7].drhodxi_ph[6], has value: -0.208911" warning: [fmi2Warning] VapourCycle_01/logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.9.0-ClaRa/BaseClasses/PartialGas_ph.mo:41: The following assertion has been violated at time 0.000000 ((condenser.flow_b.fluid[7].drhodxi_ph[8] >= 0.0), condenser.flow_b.fluid[7].drhodxi_ph[8]=-1.012068517849135) --> "Variable violating min constraint: 0.0 <= condenser.flow_b.fluid[7].drhodxi_ph[8], has value: -1.01207" warning: [fmi2Warning] VapourCycle_01/logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.9.0-ClaRa/BaseClasses/PartialGas_ph.mo:41: The following assertion has been violated at time 0.000000 ((condenser.flow_b.fluid[7].drhodxi_ph[9] >= 0.0), condenser.flow_b.fluid[7].drhodxi_ph[9]=-1.120439964829564) --> "Variable violating min constraint: 0.0 <= condenser.flow_b.fluid[7].drhodxi_ph[9], has value: -1.12044" warning: [fmi2Warning] VapourCycle_01/logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.9.0-ClaRa/BaseClasses/PartialGas_ph.mo:41: The following assertion has been violated at time 0.000000 ((condenser.flow_b.fluid[8].drhodxi_ph[2] >= 0.0), condenser.flow_b.fluid[8].drhodxi_ph[2]=-0.3547990255950058) --> "Variable violating min constraint: 0.0 <= condenser.flow_b.fluid[8].drhodxi_ph[2], has value: -0.354799" warning: [fmi2Warning] VapourCycle_01/logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.9.0-ClaRa/BaseClasses/PartialGas_ph.mo:41: The following assertion has been violated at time 0.000000 ((condenser.flow_b.fluid[8].drhodxi_ph[5] >= 0.0), condenser.flow_b.fluid[8].drhodxi_ph[5]=-0.3546357698749468) --> "Variable violating min constraint: 0.0 <= condenser.flow_b.fluid[8].drhodxi_ph[5], has value: -0.354636" warning: [fmi2Warning] VapourCycle_01/logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.9.0-ClaRa/BaseClasses/PartialGas_ph.mo:41: The following assertion has been violated at time 0.000000 ((condenser.flow_b.fluid[8].drhodxi_ph[6] >= 0.0), condenser.flow_b.fluid[8].drhodxi_ph[6]=-0.2086503652631019) --> "Variable violating min constraint: 0.0 <= condenser.flow_b.fluid[8].drhodxi_ph[6], has value: -0.20865" warning: [fmi2Warning] VapourCycle_01/logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.9.0-ClaRa/BaseClasses/PartialGas_ph.mo:41: The following assertion has been violated at time 0.000000 ((condenser.flow_b.fluid[8].drhodxi_ph[8] >= 0.0), condenser.flow_b.fluid[8].drhodxi_ph[8]=-1.010806589911653) --> "Variable violating min constraint: 0.0 <= condenser.flow_b.fluid[8].drhodxi_ph[8], has value: -1.01081" warning: [fmi2Warning] VapourCycle_01/logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.9.0-ClaRa/BaseClasses/PartialGas_ph.mo:41: The following assertion has been violated at time 0.000000 ((condenser.flow_b.fluid[8].drhodxi_ph[9] >= 0.0), condenser.flow_b.fluid[8].drhodxi_ph[9]=-1.119042910708272) --> "Variable violating min constraint: 0.0 <= condenser.flow_b.fluid[8].drhodxi_ph[9], has value: -1.11904" warning: [fmi2Warning] VapourCycle_01/logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.9.0-ClaRa/BaseClasses/PartialGas_ph.mo:41: The following assertion has been violated at time 0.000000 ((condenser.flow_b.fluid[9].drhodxi_ph[2] >= 0.0), condenser.flow_b.fluid[9].drhodxi_ph[2]=-0.3543560815049966) --> "Variable violating min constraint: 0.0 <= condenser.flow_b.fluid[9].drhodxi_ph[2], has value: -0.354356" warning: [fmi2Warning] VapourCycle_01/logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.9.0-ClaRa/BaseClasses/PartialGas_ph.mo:41: The following assertion has been violated at time 0.000000 ((condenser.flow_b.fluid[9].drhodxi_ph[5] >= 0.0), condenser.flow_b.fluid[9].drhodxi_ph[5]=-0.3541930295993542) --> "Variable violating min constraint: 0.0 <= condenser.flow_b.fluid[9].drhodxi_ph[5], has value: -0.354193" warning: [fmi2Warning] VapourCycle_01/logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.9.0-ClaRa/BaseClasses/PartialGas_ph.mo:41: The following assertion has been violated at time 0.000000 ((condenser.flow_b.fluid[9].drhodxi_ph[6] >= 0.0), condenser.flow_b.fluid[9].drhodxi_ph[6]=-0.2083898785100267) --> "Variable violating min constraint: 0.0 <= condenser.flow_b.fluid[9].drhodxi_ph[6], has value: -0.20839" warning: [fmi2Warning] VapourCycle_01/logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.9.0-ClaRa/BaseClasses/PartialGas_ph.mo:41: The following assertion has been violated at time 0.000000 ((condenser.flow_b.fluid[9].drhodxi_ph[8] >= 0.0), condenser.flow_b.fluid[9].drhodxi_ph[8]=-1.009544661966973) --> "Variable violating min constraint: 0.0 <= condenser.flow_b.fluid[9].drhodxi_ph[8], has value: -1.00954" warning: [fmi2Warning] VapourCycle_01/logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.9.0-ClaRa/BaseClasses/PartialGas_ph.mo:41: The following assertion has been violated at time 0.000000 ((condenser.flow_b.fluid[9].drhodxi_ph[9] >= 0.0), condenser.flow_b.fluid[9].drhodxi_ph[9]=-1.117645856579012) --> "Variable violating min constraint: 0.0 <= condenser.flow_b.fluid[9].drhodxi_ph[9], has value: -1.11765" warning: [fmi2Warning] VapourCycle_01/logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.9.0-ClaRa/BaseClasses/PartialGas_pT.mo:41: The following assertion has been violated at time 0.000000 ((condenser.flow_b.fluidInlet.drhodxi_ph[2] >= 0.0), condenser.flow_b.fluidInlet.drhodxi_ph[2]=-0.3272200790111284) --> "Variable violating min constraint: 0.0 <= condenser.flow_b.fluidInlet.drhodxi_ph[2], has value: -0.32722" warning: [fmi2Warning] VapourCycle_01/logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.9.0-ClaRa/BaseClasses/PartialGas_pT.mo:41: The following assertion has been violated at time 0.000000 ((condenser.flow_b.fluidInlet.drhodxi_ph[5] >= 0.0), condenser.flow_b.fluidInlet.drhodxi_ph[5]=-0.3271091879021883) --> "Variable violating min constraint: 0.0 <= condenser.flow_b.fluidInlet.drhodxi_ph[5], has value: -0.327109" warning: [fmi2Warning] VapourCycle_01/logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.9.0-ClaRa/BaseClasses/PartialGas_pT.mo:41: The following assertion has been violated at time 0.000000 ((condenser.flow_b.fluidInlet.drhodxi_ph[6] >= 0.0), condenser.flow_b.fluidInlet.drhodxi_ph[6]=-0.1889740896369219) --> "Variable violating min constraint: 0.0 <= condenser.flow_b.fluidInlet.drhodxi_ph[6], has value: -0.188974" warning: [fmi2Warning] VapourCycle_01/logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.9.0-ClaRa/BaseClasses/PartialGas_pT.mo:41: The following assertion has been violated at time 0.000000 ((condenser.flow_b.fluidInlet.drhodxi_ph[8] >= 0.0), condenser.flow_b.fluidInlet.drhodxi_ph[8]=-0.9372378459189453) --> "Variable violating min constraint: 0.0 <= condenser.flow_b.fluidInlet.drhodxi_ph[8], has value: -0.937238" warning: [fmi2Warning] VapourCycle_01/logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.9.0-ClaRa/BaseClasses/PartialGas_pT.mo:41: The following assertion has been violated at time 0.000000 ((condenser.flow_b.fluidInlet.drhodxi_ph[9] >= 0.0), condenser.flow_b.fluidInlet.drhodxi_ph[9]=-1.034224072636871) --> "Variable violating min constraint: 0.0 <= condenser.flow_b.fluidInlet.drhodxi_ph[9], has value: -1.03422" warning: [fmi2Warning] VapourCycle_01/logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.9.0-ClaRa/BaseClasses/PartialGas_pT.mo:41: The following assertion has been violated at time 0.000000 ((condenser.flow_b.fluidOutlet.drhodxi_ph[2] >= 0.0), condenser.flow_b.fluidOutlet.drhodxi_ph[2]=-0.3543560815049966) --> "Variable violating min constraint: 0.0 <= condenser.flow_b.fluidOutlet.drhodxi_ph[2], has value: -0.354356" warning: [fmi2Warning] VapourCycle_01/logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.9.0-ClaRa/BaseClasses/PartialGas_pT.mo:41: The following assertion has been violated at time 0.000000 ((condenser.flow_b.fluidOutlet.drhodxi_ph[5] >= 0.0), condenser.flow_b.fluidOutlet.drhodxi_ph[5]=-0.3541930295993542) --> "Variable violating min constraint: 0.0 <= condenser.flow_b.fluidOutlet.drhodxi_ph[5], has value: -0.354193" warning: [fmi2Warning] VapourCycle_01/logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.9.0-ClaRa/BaseClasses/PartialGas_pT.mo:41: The following assertion has been violated at time 0.000000 ((condenser.flow_b.fluidOutlet.drhodxi_ph[6] >= 0.0), condenser.flow_b.fluidOutlet.drhodxi_ph[6]=-0.2083898785100267) --> "Variable violating min constraint: 0.0 <= condenser.flow_b.fluidOutlet.drhodxi_ph[6], has value: -0.20839" warning: [fmi2Warning] VapourCycle_01/logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.9.0-ClaRa/BaseClasses/PartialGas_pT.mo:41: The following assertion has been violated at time 0.000000 ((condenser.flow_b.fluidOutlet.drhodxi_ph[8] >= 0.0), condenser.flow_b.fluidOutlet.drhodxi_ph[8]=-1.009544661966973) --> "Variable violating min constraint: 0.0 <= condenser.flow_b.fluidOutlet.drhodxi_ph[8], has value: -1.00954" warning: [fmi2Warning] VapourCycle_01/logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/TILMedia 1.9.0-ClaRa/BaseClasses/PartialGas_pT.mo:41: The following assertion has been violated at time 0.000000 ((condenser.flow_b.fluidOutlet.drhodxi_ph[9] >= 0.0), condenser.flow_b.fluidOutlet.drhodxi_ph[9]=-1.117645856579012) --> "Variable violating min constraint: 0.0 <= condenser.flow_b.fluidOutlet.drhodxi_ph[9], has value: -1.11765" warning: [fmi2Warning] VapourCycle_01/logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.9.0-main/Basics/ControlVolumes/Fundamentals/SpacialDistribution/RealPhases.mo:12: The following assertion has been violated at time 0.000000 ((steamSeparator.volume.phaseBorder.Delta_p_geo_in[1] >= 0.0), steamSeparator.volume.phaseBorder.Delta_p_geo_in[1]=-62.42803694301045) --> "Variable violating min constraint: 0.0 <= steamSeparator.volume.phaseBorder.Delta_p_geo_in[1], has value: -62.428" warning: [fmi2Warning] VapourCycle_01/logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/ClaRa 1.9.0-main/Basics/ControlVolumes/Fundamentals/SpacialDistribution/RealPhases.mo:13: The following assertion has been violated at time 0.000000 ((steamSeparator.volume.phaseBorder.Delta_p_geo_out[2] >= 0.0), steamSeparator.volume.phaseBorder.Delta_p_geo_out[2]=-62.42803694301045) --> "Variable violating min constraint: 0.0 <= steamSeparator.volume.phaseBorder.Delta_p_geo_out[2], has value: -62.428" info: Result file: ../ClaRa_dev_ClaRa.Examples.VapourCycle_01_OMSimulator-cs-cvode_res.mat (bufferSize=10) info: Variable VapourCycle_01.condenser.flow_a.complexity will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.condenser.flow_b.complexity will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.plateHEX.flow_a.complexity will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.plateHEX.flow_b.complexity will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.pumpVLE_L1_simple.complexity will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.steamSeparator.complexity will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.steamSeparator.volume.complexity will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.tube.complexity will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.valve.complexity will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.condenser.In_a.Medium.concatVLEFluidName will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.condenser.In_b.Medium.concatGasName will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.condenser.Out_a.Medium.concatVLEFluidName will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.condenser.Out_b.Medium.concatGasName will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.condenser.eye2.medium.concatGasName will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.condenser.flow_a.inlet.Medium.concatVLEFluidName will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.condenser.flow_a.medium.concatVLEFluidName will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.condenser.flow_a.outlet.Medium.concatVLEFluidName will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.condenser.flow_b.fluidInlet.gasType.concatGasName will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.condenser.flow_b.fluidOutlet.gasType.concatGasName will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.condenser.flow_b.inlet.Medium.concatGasName will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.condenser.flow_b.medium.concatGasName will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.condenser.flow_b.outlet.Medium.concatGasName will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.condenser.flow_b.summary.inlet.mediumModel.concatGasName will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.condenser.flow_b.summary.outlet.mediumModel.concatGasName will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.condenser.medium_a.concatVLEFluidName will not be stored in the result file, because the signal type is not supported info: Parameter VapourCycle_01.condenser.medium_a.vleFluidNames[1] will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.condenser.medium_b.concatGasName will not be stored in the result file, because the signal type is not supported info: Parameter VapourCycle_01.condenser.medium_b.gasNames[1] will not be stored in the result file, because the signal type is not supported info: Parameter VapourCycle_01.condenser.medium_b.gasNames[2] will not be stored in the result file, because the signal type is not supported info: Parameter VapourCycle_01.condenser.medium_b.gasNames[3] will not be stored in the result file, because the signal type is not supported info: Parameter VapourCycle_01.condenser.medium_b.gasNames[4] will not be stored in the result file, because the signal type is not supported info: Parameter VapourCycle_01.condenser.medium_b.gasNames[5] will not be stored in the result file, because the signal type is not supported info: Parameter VapourCycle_01.condenser.medium_b.gasNames[6] will not be stored in the result file, because the signal type is not supported info: Parameter VapourCycle_01.condenser.medium_b.gasNames[7] will not be stored in the result file, because the signal type is not supported info: Parameter VapourCycle_01.condenser.medium_b.gasNames[8] will not be stored in the result file, because the signal type is not supported info: Parameter VapourCycle_01.condenser.medium_b.gasNames[9] will not be stored in the result file, because the signal type is not supported info: Parameter VapourCycle_01.condenser.medium_b.gasNames[10] will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.flueGasFlowSource1.eyeOut.medium.concatGasName will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.flueGasFlowSource1.gas_a.Medium.concatGasName will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.flueGasFlowSource1.medium.concatGasName will not be stored in the result file, because the signal type is not supported info: Parameter VapourCycle_01.flueGasFlowSource1.medium.gasNames[1] will not be stored in the result file, because the signal type is not supported info: Parameter VapourCycle_01.flueGasFlowSource1.medium.gasNames[2] will not be stored in the result file, because the signal type is not supported info: Parameter VapourCycle_01.flueGasFlowSource1.medium.gasNames[3] will not be stored in the result file, because the signal type is not supported info: Parameter VapourCycle_01.flueGasFlowSource1.medium.gasNames[4] will not be stored in the result file, because the signal type is not supported info: Parameter VapourCycle_01.flueGasFlowSource1.medium.gasNames[5] will not be stored in the result file, because the signal type is not supported info: Parameter VapourCycle_01.flueGasFlowSource1.medium.gasNames[6] will not be stored in the result file, because the signal type is not supported info: Parameter VapourCycle_01.flueGasFlowSource1.medium.gasNames[7] will not be stored in the result file, because the signal type is not supported info: Parameter VapourCycle_01.flueGasFlowSource1.medium.gasNames[8] will not be stored in the result file, because the signal type is not supported info: Parameter VapourCycle_01.flueGasFlowSource1.medium.gasNames[9] will not be stored in the result file, because the signal type is not supported info: Parameter VapourCycle_01.flueGasFlowSource1.medium.gasNames[10] will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.flueGasPressureSink1.eyeOut.medium.concatGasName will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.flueGasPressureSink1.gas_a.Medium.concatGasName will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.flueGasPressureSink1.medium.concatGasName will not be stored in the result file, because the signal type is not supported info: Parameter VapourCycle_01.flueGasPressureSink1.medium.gasNames[1] will not be stored in the result file, because the signal type is not supported info: Parameter VapourCycle_01.flueGasPressureSink1.medium.gasNames[2] will not be stored in the result file, because the signal type is not supported info: Parameter VapourCycle_01.flueGasPressureSink1.medium.gasNames[3] will not be stored in the result file, because the signal type is not supported info: Parameter VapourCycle_01.flueGasPressureSink1.medium.gasNames[4] will not be stored in the result file, because the signal type is not supported info: Parameter VapourCycle_01.flueGasPressureSink1.medium.gasNames[5] will not be stored in the result file, because the signal type is not supported info: Parameter VapourCycle_01.flueGasPressureSink1.medium.gasNames[6] will not be stored in the result file, because the signal type is not supported info: Parameter VapourCycle_01.flueGasPressureSink1.medium.gasNames[7] will not be stored in the result file, because the signal type is not supported info: Parameter VapourCycle_01.flueGasPressureSink1.medium.gasNames[8] will not be stored in the result file, because the signal type is not supported info: Parameter VapourCycle_01.flueGasPressureSink1.medium.gasNames[9] will not be stored in the result file, because the signal type is not supported info: Parameter VapourCycle_01.flueGasPressureSink1.medium.gasNames[10] will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.gasTemperatureSensor_hex_simple.inlet.Medium.concatGasName will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.gasTemperatureSensor_hex_simple.medium.concatGasName will not be stored in the result file, because the signal type is not supported info: Parameter VapourCycle_01.gasTemperatureSensor_hex_simple.medium.gasNames[1] will not be stored in the result file, because the signal type is not supported info: Parameter VapourCycle_01.gasTemperatureSensor_hex_simple.medium.gasNames[2] will not be stored in the result file, because the signal type is not supported info: Parameter VapourCycle_01.gasTemperatureSensor_hex_simple.medium.gasNames[3] will not be stored in the result file, because the signal type is not supported info: Parameter VapourCycle_01.gasTemperatureSensor_hex_simple.medium.gasNames[4] will not be stored in the result file, because the signal type is not supported info: Parameter VapourCycle_01.gasTemperatureSensor_hex_simple.medium.gasNames[5] will not be stored in the result file, because the signal type is not supported info: Parameter VapourCycle_01.gasTemperatureSensor_hex_simple.medium.gasNames[6] will not be stored in the result file, because the signal type is not supported info: Parameter VapourCycle_01.gasTemperatureSensor_hex_simple.medium.gasNames[7] will not be stored in the result file, because the signal type is not supported info: Parameter VapourCycle_01.gasTemperatureSensor_hex_simple.medium.gasNames[8] will not be stored in the result file, because the signal type is not supported info: Parameter VapourCycle_01.gasTemperatureSensor_hex_simple.medium.gasNames[9] will not be stored in the result file, because the signal type is not supported info: Parameter VapourCycle_01.gasTemperatureSensor_hex_simple.medium.gasNames[10] will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.gasTemperatureSensor_hex_simple.outlet.Medium.concatGasName will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.massFlowSource_T2.medium.concatVLEFluidName will not be stored in the result file, because the signal type is not supported info: Parameter VapourCycle_01.massFlowSource_T2.medium.vleFluidNames[1] will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.massFlowSource_T2.steam_a.Medium.concatVLEFluidName will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.plateHEX.In_a.Medium.concatVLEFluidName will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.plateHEX.In_b.Medium.concatVLEFluidName will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.plateHEX.Out_a.Medium.concatVLEFluidName will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.plateHEX.Out_b.Medium.concatVLEFluidName will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.plateHEX.flow_a.inlet.Medium.concatVLEFluidName will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.plateHEX.flow_a.medium.concatVLEFluidName will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.plateHEX.flow_a.outlet.Medium.concatVLEFluidName will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.plateHEX.flow_b.inlet.Medium.concatVLEFluidName will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.plateHEX.flow_b.medium.concatVLEFluidName will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.plateHEX.flow_b.outlet.Medium.concatVLEFluidName will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.plateHEX.medium_a.concatVLEFluidName will not be stored in the result file, because the signal type is not supported info: Parameter VapourCycle_01.plateHEX.medium_a.vleFluidNames[1] will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.plateHEX.medium_b.concatVLEFluidName will not be stored in the result file, because the signal type is not supported info: Parameter VapourCycle_01.plateHEX.medium_b.vleFluidNames[1] will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.pressureSink_pT2.medium.concatVLEFluidName will not be stored in the result file, because the signal type is not supported info: Parameter VapourCycle_01.pressureSink_pT2.medium.vleFluidNames[1] will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.pressureSink_pT2.steam_a.Medium.concatVLEFluidName will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.pumpVLE_L1_simple.inlet.Medium.concatVLEFluidName will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.pumpVLE_L1_simple.medium.concatVLEFluidName will not be stored in the result file, because the signal type is not supported info: Parameter VapourCycle_01.pumpVLE_L1_simple.medium.vleFluidNames[1] will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.pumpVLE_L1_simple.outlet.Medium.concatVLEFluidName will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.quadrupleGas.eye.medium.concatGasName will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.quadrupleGas.medium.concatGasName will not be stored in the result file, because the signal type is not supported info: Parameter VapourCycle_01.quadrupleGas.medium.gasNames[1] will not be stored in the result file, because the signal type is not supported info: Parameter VapourCycle_01.quadrupleGas.medium.gasNames[2] will not be stored in the result file, because the signal type is not supported info: Parameter VapourCycle_01.quadrupleGas.medium.gasNames[3] will not be stored in the result file, because the signal type is not supported info: Parameter VapourCycle_01.quadrupleGas.medium.gasNames[4] will not be stored in the result file, because the signal type is not supported info: Parameter VapourCycle_01.quadrupleGas.medium.gasNames[5] will not be stored in the result file, because the signal type is not supported info: Parameter VapourCycle_01.quadrupleGas.medium.gasNames[6] will not be stored in the result file, because the signal type is not supported info: Parameter VapourCycle_01.quadrupleGas.medium.gasNames[7] will not be stored in the result file, because the signal type is not supported info: Parameter VapourCycle_01.quadrupleGas.medium.gasNames[8] will not be stored in the result file, because the signal type is not supported info: Parameter VapourCycle_01.quadrupleGas.medium.gasNames[9] will not be stored in the result file, because the signal type is not supported info: Parameter VapourCycle_01.quadrupleGas.medium.gasNames[10] will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.simCenter.airModel.concatGasName will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.simCenter.airModel.gasNames[1] will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.simCenter.airModel.gasNames[2] will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.simCenter.airModel.gasNames[3] will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.simCenter.airModel.gasNames[4] will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.simCenter.airModel.gasNames[5] will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.simCenter.airModel.gasNames[6] will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.simCenter.airModel.gasNames[7] will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.simCenter.airModel.gasNames[8] will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.simCenter.airModel.gasNames[9] will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.simCenter.airModel.gasNames[10] will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.simCenter.flueGasModel.concatGasName will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.simCenter.flueGasModel.gasNames[1] will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.simCenter.flueGasModel.gasNames[2] will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.simCenter.flueGasModel.gasNames[3] will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.simCenter.flueGasModel.gasNames[4] will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.simCenter.flueGasModel.gasNames[5] will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.simCenter.flueGasModel.gasNames[6] will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.simCenter.flueGasModel.gasNames[7] will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.simCenter.flueGasModel.gasNames[8] will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.simCenter.flueGasModel.gasNames[9] will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.simCenter.flueGasModel.gasNames[10] will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.simCenter.fluid1.concatVLEFluidName will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.simCenter.fluid1.vleFluidNames[1] will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.simCenter.fluid2.concatVLEFluidName will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.simCenter.fluid2.vleFluidNames[1] will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.simCenter.fluid3.concatVLEFluidName will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.simCenter.fluid3.vleFluidNames[1] will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.steamSeparator.inlet.Medium.concatVLEFluidName will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.steamSeparator.medium.concatVLEFluidName will not be stored in the result file, because the signal type is not supported info: Parameter VapourCycle_01.steamSeparator.medium.vleFluidNames[1] will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.steamSeparator.outlet1.Medium.concatVLEFluidName will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.steamSeparator.outlet2.Medium.concatVLEFluidName will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.steamSeparator.volume.fluidIn[1].vleFluidType.concatVLEFluidName will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.steamSeparator.volume.fluidOut[1].vleFluidType.concatVLEFluidName will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.steamSeparator.volume.fluidOut[2].vleFluidType.concatVLEFluidName will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.steamSeparator.volume.heattransfer.temperatureDifference will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.steamSeparator.volume.inlet[1].Medium.concatVLEFluidName will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.steamSeparator.volume.medium.concatVLEFluidName will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.steamSeparator.volume.outlet[1].Medium.concatVLEFluidName will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.steamSeparator.volume.outlet[2].Medium.concatVLEFluidName will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.tube.inlet.Medium.concatVLEFluidName will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.tube.medium.concatVLEFluidName will not be stored in the result file, because the signal type is not supported info: Parameter VapourCycle_01.tube.medium.vleFluidNames[1] will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.tube.outlet.Medium.concatVLEFluidName will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.valve.fluidIn.vleFluidType.concatVLEFluidName will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.valve.fluidOut.vleFluidType.concatVLEFluidName will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.valve.inlet.Medium.concatVLEFluidName will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.valve.medium.concatVLEFluidName will not be stored in the result file, because the signal type is not supported info: Parameter VapourCycle_01.valve.medium.vleFluidNames[1] will not be stored in the result file, because the signal type is not supported info: Variable VapourCycle_01.valve.outlet.Medium.concatVLEFluidName will not be stored in the result file, because the signal type is not supported info: Parameter VapourCycle_01.valve.pressureLoss.ValveCharacteristics.delimiter will not be stored in the result file, because the signal type is not supported info: Parameter VapourCycle_01.valve.pressureLoss.ValveCharacteristics.fileName will not be stored in the result file, because the signal type is not supported info: Parameter VapourCycle_01.valve.pressureLoss.ValveCharacteristics.tableName will not be stored in the result file, because the signal type is not supported info: 57 warnings info: 0 errors