(cd run_OMSimulator-cs-cvode && /home/hudson/saved_omc/OMSimulator/install/bin/OMSimulator --stripRoot --tempDir=temp_Buildings_13_Buildings_Fluid_HeatPumps_ModularReversible_Examples_TableData2DLoadDepSHC1Only_OMSimulator-cs-cvode_fmu --startTime=0 --stopTime=86400 --stepSize=34.56 --mode=cs --timeout=240 --tolerance=1e-06 ../Buildings_13_Buildings_Fluid_HeatPumps_ModularReversible_Examples_TableData2DLoadDepSHC1Only_OMSimulator-cs-cvode.fmu) LOG_SOLVER | info | CVODE linear multistep method CV_BDF LOG_SOLVER | info | CVODE maximum integration order CV_ITER_NEWTON LOG_SOLVER | info | CVODE use equidistant time grid YES LOG_SOLVER | info | CVODE Using relative error tolerance 1.000000e-06 LOG_SOLVER | info | CVODE Using sparse linear solver SUNLinSol_KLU. LOG_SOLVER | info | CVODE Use sparse Jacobian method coloredNumerical LOG_SOLVER | info | CVODE uses internal root finding method YES LOG_SOLVER | info | CVODE maximum absolut step size 0 LOG_SOLVER | info | CVODE initial step size is set automatically LOG_SOLVER | info | CVODE maximum integration order 5 LOG_SOLVER | info | CVODE maximum number of nonlinear convergence failures permitted during one step 10 LOG_SOLVER | info | CVODE BDF stability limit detection algorithm ON info: *** FMU Simulation Info *** - model : Buildings.Fluid.HeatPumps.ModularReversible.Examples.TableData2DLoadDepSHC1Only (co-simulation) - fmiVersion: 2.0 - startTime : 0.000000 - stopTime : 86400.000000 - tolerance : 1e-06 - stepSize : 34.56 warning: [fmi2Warning] TableData2DLoadDepSHC1Only/logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:101: The following assertion has been violated at time 0.000000 ((pumChwPri.pum[1].etaHyd >= 0.0), pumChwPri.pum[1].etaHyd=-1.399136581418189e-40) --> "Variable violating min constraint: 0.0 <= pumChwPri.pum[1].etaHyd, has value: -1.39914e-40" warning: [fmi2Warning] TableData2DLoadDepSHC1Only/logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:101: The following assertion has been violated at time 0.000000 ((pumChwPri.pum[2].etaHyd >= 0.0), pumChwPri.pum[2].etaHyd=-1.399136581418189e-40) --> "Variable violating min constraint: 0.0 <= pumChwPri.pum[2].etaHyd, has value: -1.39914e-40" warning: [fmi2Warning] TableData2DLoadDepSHC1Only/logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:101: The following assertion has been violated at time 0.000000 ((pumChwPri.pum[3].etaHyd >= 0.0), pumChwPri.pum[3].etaHyd=-5.55289943753395e-40) --> "Variable violating min constraint: 0.0 <= pumChwPri.pum[3].etaHyd, has value: -5.5529e-40" warning: [fmi2Warning] TableData2DLoadDepSHC1Only/logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:101: The following assertion has been violated at time 0.000000 ((pumHwPri.pum[1].etaHyd >= 0.0), pumHwPri.pum[1].etaHyd=-1.913835661897013e-40) --> "Variable violating min constraint: 0.0 <= pumHwPri.pum[1].etaHyd, has value: -1.91384e-40" warning: [fmi2Warning] TableData2DLoadDepSHC1Only/logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:101: The following assertion has been violated at time 0.000000 ((pumHwPri.pum[2].etaHyd >= 0.0), pumHwPri.pum[2].etaHyd=-1.913835661897013e-40) --> "Variable violating min constraint: 0.0 <= pumHwPri.pum[2].etaHyd, has value: -1.91384e-40" warning: [fmi2Warning] TableData2DLoadDepSHC1Only/logStatusWarning: /home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Fluid/Movers/BaseClasses/PartialFlowMachine.mo:101: The following assertion has been violated at time 0.000000 ((pumHwPri.pum[3].etaHyd >= 0.0), pumHwPri.pum[3].etaHyd=-7.655342647588052e-40) --> "Variable violating min constraint: 0.0 <= pumHwPri.pum[3].etaHyd, has value: -7.65534e-40" info: Result file: Buildings_13_Buildings_Fluid_HeatPumps_ModularReversible_Examples_TableData2DLoadDepSHC1Only_OMSimulator-cs-cvode_res.mat (bufferSize=10) info: Parameter TableData2DLoadDepSHC1Only.assMes.message will not be stored in the result file, because the signal type is not supported info: Parameter TableData2DLoadDepSHC1Only.dat.devIde will not be stored in the result file, because the signal type is not supported info: Parameter TableData2DLoadDepSHC1Only.dat.fileNameCoo will not be stored in the result file, because the signal type is not supported info: Parameter TableData2DLoadDepSHC1Only.dat.fileNameHea will not be stored in the result file, because the signal type is not supported info: Parameter TableData2DLoadDepSHC1Only.dat.fileNameShc will not be stored in the result file, because the signal type is not supported info: Variable TableData2DLoadDepSHC1Only.dat.tabNamPCoo[1] will not be stored in the result file, because the signal type is not supported info: Variable TableData2DLoadDepSHC1Only.dat.tabNamPHea[1] will not be stored in the result file, because the signal type is not supported info: Variable TableData2DLoadDepSHC1Only.dat.tabNamPShc[1] will not be stored in the result file, because the signal type is not supported info: Variable TableData2DLoadDepSHC1Only.dat.tabNamQCoo[1] will not be stored in the result file, because the signal type is not supported info: Variable TableData2DLoadDepSHC1Only.dat.tabNamQHea[1] will not be stored in the result file, because the signal type is not supported info: Variable TableData2DLoadDepSHC1Only.dat.tabNamQShc[1] will not be stored in the result file, because the signal type is not supported info: Variable TableData2DLoadDepSHC1Only.hp.dat.tabNamPCoo[1] will not be stored in the result file, because the signal type is not supported info: Variable TableData2DLoadDepSHC1Only.hp.dat.tabNamPHea[1] will not be stored in the result file, because the signal type is not supported info: Variable TableData2DLoadDepSHC1Only.hp.dat.tabNamPShc[1] will not be stored in the result file, because the signal type is not supported info: Variable TableData2DLoadDepSHC1Only.hp.dat.tabNamQCoo[1] will not be stored in the result file, because the signal type is not supported info: Variable TableData2DLoadDepSHC1Only.hp.dat.tabNamQHea[1] will not be stored in the result file, because the signal type is not supported info: Variable TableData2DLoadDepSHC1Only.hp.dat.tabNamQShc[1] will not be stored in the result file, because the signal type is not supported info: Variable TableData2DLoadDepSHC1Only.hp.refCyc.refCycHeaPumHea.calQUseP.tabNamPCoo[1] will not be stored in the result file, because the signal type is not supported info: Variable TableData2DLoadDepSHC1Only.hp.refCyc.refCycHeaPumHea.calQUseP.tabNamPHea[1] will not be stored in the result file, because the signal type is not supported info: Variable TableData2DLoadDepSHC1Only.hp.refCyc.refCycHeaPumHea.calQUseP.tabNamPShc[1] will not be stored in the result file, because the signal type is not supported info: Variable TableData2DLoadDepSHC1Only.hp.refCyc.refCycHeaPumHea.calQUseP.tabNamQCoo[1] will not be stored in the result file, because the signal type is not supported info: Variable TableData2DLoadDepSHC1Only.hp.refCyc.refCycHeaPumHea.calQUseP.tabNamQHea[1] will not be stored in the result file, because the signal type is not supported info: Variable TableData2DLoadDepSHC1Only.hp.refCyc.refCycHeaPumHea.calQUseP.tabNamQShc[1] will not be stored in the result file, because the signal type is not supported info: Variable TableData2DLoadDepSHC1Only.hp.refCyc.refCycHeaPumHea.dat.tabNamPCoo[1] will not be stored in the result file, because the signal type is not supported info: Variable TableData2DLoadDepSHC1Only.hp.refCyc.refCycHeaPumHea.dat.tabNamPHea[1] will not be stored in the result file, because the signal type is not supported info: Variable TableData2DLoadDepSHC1Only.hp.refCyc.refCycHeaPumHea.dat.tabNamPShc[1] will not be stored in the result file, because the signal type is not supported info: Variable TableData2DLoadDepSHC1Only.hp.refCyc.refCycHeaPumHea.dat.tabNamQCoo[1] will not be stored in the result file, because the signal type is not supported info: Variable TableData2DLoadDepSHC1Only.hp.refCyc.refCycHeaPumHea.dat.tabNamQHea[1] will not be stored in the result file, because the signal type is not supported info: Variable TableData2DLoadDepSHC1Only.hp.refCyc.refCycHeaPumHea.dat.tabNamQShc[1] will not be stored in the result file, because the signal type is not supported info: Parameter TableData2DLoadDepSHC1Only.weaDat.filNam will not be stored in the result file, because the signal type is not supported LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable] | | | | The following assertion has been violated at time 60168.960000 | | | | ((noEvent(pumHwPri.ports_a[3].p >= 0.0)), pumHwPri.ports_a[3].p=-399599878.016767) --> "Pressure (= -3.996e+08 Pa) of medium "Buildings.Media.Water" is negative | | | | (Temperature = 323.142 K)" LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable] | | | | The following assertion has been violated at time 60168.960000 | | | | ((noEvent(pumHwPri.ports_a[3].p >= 0.0)), pumHwPri.ports_a[3].p=-399599878.016767) --> "Pressure (= -3.996e+08 Pa) of medium "Buildings.Media.Water" is negative | | | | (Temperature = 323.15 K)" LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable] | | | | The following assertion has been violated at time 60168.960000 | | | | ((noEvent(pumHwPri.ports_a[3].p >= 0.0)), pumHwPri.ports_a[3].p=-399599878.016767) --> "Pressure (= -3.996e+08 Pa) of medium "Buildings.Media.Water" is negative | | | | (Temperature = 323.146 K)" LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable] | | | | The following assertion has been violated at time 60168.960000 | | | | ((noEvent(pumHwPri.ports_a[3].p >= 0.0)), pumHwPri.ports_a[3].p=-399599878.016767) --> "Pressure (= -3.996e+08 Pa) of medium "Buildings.Media.Water" is negative | | | | (Temperature = 323.146 K)" LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable] | | | | The following assertion has been violated at time 60168.960000 | | | | ((noEvent(pumHwPri.ports_a[3].p >= 0.0)), pumHwPri.ports_a[3].p=-242741670.7614633) --> "Pressure (= -2.42742e+08 Pa) of medium "Buildings.Media.Water" is negative | | | | (Temperature = 323.142 K)" LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable] | | | | The following assertion has been violated at time 60168.960000 | | | | ((noEvent(pumHwPri.ports_a[3].p >= 0.0)), pumHwPri.ports_a[3].p=-242741670.7614633) --> "Pressure (= -2.42742e+08 Pa) of medium "Buildings.Media.Water" is negative | | | | (Temperature = 323.15 K)" LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable] | | | | The following assertion has been violated at time 60168.960000 | | | | ((noEvent(pumHwPri.ports_a[3].p >= 0.0)), pumHwPri.ports_a[3].p=-242741670.7614633) --> "Pressure (= -2.42742e+08 Pa) of medium "Buildings.Media.Water" is negative | | | | (Temperature = 323.146 K)" LOG_ASSERT | info | [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69:5-69:152:writable] | | | | The following assertion has been violated at time 60168.960000 | | | | ((noEvent(pumHwPri.ports_a[3].p >= 0.0)), pumHwPri.ports_a[3].p=-242741670.7614633) --> "Pressure (= -2.42742e+08 Pa) of medium "Buildings.Media.Water" is negative | | | | (Temperature = 323.146 K)" LOG_ASSERT | error | No event found, but assert was triggered. Throwing now! error: [fmi2logger] [fmi2Error] TableData2DLoadDepSHC1Only/logStatusError: /home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Media/Water.mo:69: The following assertion has been violated at time 60168.960000 ((noEvent(pumHwPri.ports_a[3].p >= 0.0)), pumHwPri.ports_a[3].p=-399599878.016767) --> "Pressure (= -3.996e+08 Pa) of medium "Buildings.Media.Water" is negative (Temperature = 323.142 K)" error: [fmi2logger] [fmi2Error] TableData2DLoadDepSHC1Only/logFmi2Call: internalEventUpdate: terminated by an assertion. error: [stepUntil] fmi2_doStep failed for FMU "TableData2DLoadDepSHC1Only.root.TableData2DLoadDepSHC1Only" Traceback (most recent call last): File "", line 198, in _run_module_as_main File "", line 88, in _run_code File "/home/hudson/saved_omc/OMSimulator/install/lib/x86_64-linux-gnu/OMSimulator/__main__.py", line 38, in sys.exit(main()) ~~~~^^ File "/home/hudson/saved_omc/OMSimulator/install/lib/x86_64-linux-gnu/OMSimulator/cli.py", line 309, in main handler(args.model, args) ~~~~~~~^^^^^^^^^^^^^^^^^^ File "/home/hudson/saved_omc/OMSimulator/install/lib/x86_64-linux-gnu/OMSimulator/cli.py", line 176, in _runFMU fmu.simulate() ~~~~~~~~~~~~^^ File "/home/hudson/saved_omc/OMSimulator/install/lib/x86_64-linux-gnu/OMSimulator/fmu.py", line 906, in simulate raise RuntimeError(f"Failed to simulate model: {status}") RuntimeError: Failed to simulate model: Status.error info: 6 warnings info: 3 errors