(cd run_OMSimulator-cs-cvode && /home/hudson/saved_omc/OMSimulator/install/bin/OMSimulator --stripRoot --tempDir=temp_Buildings_13_Buildings_Fluid_Geothermal_ZonedBorefields_Validation_FEFLOW_InletTemperaturePulse_OMSimulator-cs-cvode_fmu --startTime=0 --stopTime=1.54656e+07 --stepSize=6186.24 --mode=cs --timeout=240 --tolerance=1e-06 ../Buildings_13_Buildings_Fluid_Geothermal_ZonedBorefields_Validation_FEFLOW_InletTemperaturePulse_OMSimulator-cs-cvode.fmu) info: *** FMU Simulation Info *** - model : Buildings.Fluid.Geothermal.ZonedBorefields.Validation.FEFLOW.InletTemperaturePulse (co-simulation) - fmiVersion: 2.0 - startTime : 0.000000 - stopTime : 15465600.000000 - tolerance : 1e-06 - stepSize : 6186.24 LOG_STDOUT | info | ... loading "tab1" from "/tmp/tmp7vxlmzvu/InletTemperaturePulse-uhrcr7vp/temp/0001_InletTemperaturePulse/resources/home/hudson/saved_omc/libraries/.openmodelica/libraries/Buildings 13.0.2-maint.13.x/Resources/Data/Fluid/Geothermal/ZonedBorefields/Validation/FEFLOW/InletTemperaturePulse.txt" info: Result file: Buildings_13_Buildings_Fluid_Geothermal_ZonedBorefields_Validation_FEFLOW_InletTemperaturePulse_OMSimulator-cs-cvode_res.mat (bufferSize=10) info: Parameter InletTemperaturePulse.TOut.delimiter will not be stored in the result file, because the signal type is not supported info: Parameter InletTemperaturePulse.TOut.fileName will not be stored in the result file, because the signal type is not supported info: Parameter InletTemperaturePulse.TOut.tableName will not be stored in the result file, because the signal type is not supported