Running: ./testmodel.py --libraries=/home/hudson/saved_omc/libraries/.openmodelica/libraries --ompython_omhome=/usr Dynawo_dev_Dynawo.Examples.IEEE14.TestCases.IEEE14CLA.conf.json loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.1.0+maint.om/package.mo", uses=false) [Timeout 180] "Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.1.0+maint.om/package.mo): time 0.001434/0.001434, allocations: 79.75 kB / 20.53 MB, free: 1.105 MB / 14.72 MB " [Timeout remaining time 180] loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.1.0+maint.om/package.mo", uses=false) [Timeout 180] "Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.1.0+maint.om/package.mo): time 0.001454/0.001454, allocations: 165.9 kB / 23.78 MB, free: 4.188 MB / 14.72 MB " [Timeout remaining time 180] loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 3.2.3+maint.om/package.mo", uses=false) [Timeout 180] "Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 3.2.3+maint.om/package.mo): time 1.359/1.359, allocations: 158.6 MB / 185.5 MB, free: 6.238 MB / 174.1 MB " [Timeout remaining time 178] loadFile("/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/package.mo", uses=false) [Timeout 180] "Notification: Performance of loadFile(/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/package.mo): time 0.6054/0.6054, allocations: 85.32 MB / 323.1 MB, free: 6.676 MB / 302.1 MB " [Timeout remaining time 179] Using package Dynawo with version 1.8.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/package.mo) Using package Modelica with version 3.2.3 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Modelica 3.2.3+maint.om/package.mo) Using package Complex with version 4.1.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/Complex 4.1.0+maint.om/package.mo) Using package ModelicaServices with version 4.1.0 (/home/hudson/saved_omc/libraries/.openmodelica/libraries/ModelicaServices 4.1.0+maint.om/package.mo) Running command: translateModel(Dynawo.Examples.IEEE14.TestCases.IEEE14CLA,tolerance=1e-06,outputFormat="mat",numberOfIntervals=20,variableFilter="time|Gen1.PGenPu|Gen1.QGenPu|Gen1.UPu|Gen2.PGenPu|Gen2.QGenPu|Gen2.UPu|Gen3.PGenPu|Gen3.QGenPu|Gen3.UPu|Gen6.PGenPu|Gen6.QGenPu|Gen6.UPu|Gen8.PGenPu|Gen8.QGenPu|Gen8.UPu|Load2.PPu|Load2.QPu",fileNamePrefix="Dynawo_dev_Dynawo.Examples.IEEE14.TestCases.IEEE14CLA") translateModel(Dynawo.Examples.IEEE14.TestCases.IEEE14CLA,tolerance=1e-06,outputFormat="mat",numberOfIntervals=20,variableFilter="time|Gen1.PGenPu|Gen1.QGenPu|Gen1.UPu|Gen2.PGenPu|Gen2.QGenPu|Gen2.UPu|Gen3.PGenPu|Gen3.QGenPu|Gen3.UPu|Gen6.PGenPu|Gen6.QGenPu|Gen6.UPu|Gen8.PGenPu|Gen8.QGenPu|Gen8.UPu|Load2.PPu|Load2.QPu",fileNamePrefix="Dynawo_dev_Dynawo.Examples.IEEE14.TestCases.IEEE14CLA") [Timeout 660] "Notification: Modelica requested package Complex of version 3.2.3. Complex 4.1.0 is used instead which states that it is fully compatible without conversion script needed. Notification: Modelica requested package ModelicaServices of version 3.2.3. ModelicaServices 4.1.0 is used instead which states that it is fully compatible without conversion script needed. Notification: Performance of FrontEnd - loaded program: time 0.00402/0.00402, allocations: 69.78 kB / 0.4887 GB, free: 25.84 MB / 446.1 MB Notification: Performance of FrontEnd - Absyn->SCode: time 0.1463/0.1503, allocations: 78.78 MB / 0.5656 GB, free: 14.39 MB / 494.1 MB Notification: Performance of NFInst.instantiate(Dynawo.Examples.IEEE14.TestCases.IEEE14CLA): time 0.0196/0.1699, allocations: 15.88 MB / 0.5811 GB, free: 14.43 MB / 0.4981 GB Notification: Performance of NFInst.instExpressions: time 0.01575/0.1857, allocations: 7.683 MB / 0.5886 GB, free: 6.719 MB / 0.4981 GB Notification: Performance of NFInst.updateImplicitVariability: time 0.00334/0.189, allocations: 79.81 kB / 0.5887 GB, free: 6.641 MB / 0.4981 GB [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:20:3-20:98:writable] Warning: Connector switchOffSignal1 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:21:3-21:125:writable] Warning: Connector switchOffSignal2 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:22:3-22:125:writable] Warning: Connector switchOffSignal3 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:24:3-24:105:writable] Warning: Connector running is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Machines/BaseClasses/BaseGeneratorSimplified.mo:30:3-30:140:writable] Warning: Connector QGenPu is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Machines/BaseClasses/BaseGeneratorSimplified.mo:32:3-32:113:writable] Warning: Connector UPu is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Machines/SignalN/BaseClasses/BaseQStator.mo:19:3-19:123:writable] Warning: Connector QStatorPu is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:20:3-20:98:writable] Warning: Connector switchOffSignal1 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:21:3-21:125:writable] Warning: Connector switchOffSignal2 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:22:3-22:125:writable] Warning: Connector switchOffSignal3 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:24:3-24:105:writable] Warning: Connector running is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Machines/BaseClasses/BaseGeneratorSimplified.mo:30:3-30:140:writable] Warning: Connector QGenPu is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Machines/BaseClasses/BaseGeneratorSimplified.mo:32:3-32:113:writable] Warning: Connector UPu is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Machines/SignalN/BaseClasses/BaseQStator.mo:19:3-19:123:writable] Warning: Connector QStatorPu is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:20:3-20:98:writable] Warning: Connector switchOffSignal1 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:21:3-21:125:writable] Warning: Connector switchOffSignal2 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:22:3-22:125:writable] Warning: Connector switchOffSignal3 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:24:3-24:105:writable] Warning: Connector running is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Machines/BaseClasses/BaseGeneratorSimplified.mo:30:3-30:140:writable] Warning: Connector QGenPu is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Machines/BaseClasses/BaseGeneratorSimplified.mo:32:3-32:113:writable] Warning: Connector UPu is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Machines/SignalN/BaseClasses/BaseQStator.mo:19:3-19:123:writable] Warning: Connector QStatorPu is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:20:3-20:98:writable] Warning: Connector switchOffSignal1 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:21:3-21:125:writable] Warning: Connector switchOffSignal2 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:22:3-22:125:writable] Warning: Connector switchOffSignal3 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:24:3-24:105:writable] Warning: Connector running is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Machines/BaseClasses/BaseGeneratorSimplified.mo:30:3-30:140:writable] Warning: Connector QGenPu is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Machines/BaseClasses/BaseGeneratorSimplified.mo:32:3-32:113:writable] Warning: Connector UPu is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Machines/SignalN/BaseClasses/BaseQStator.mo:19:3-19:123:writable] Warning: Connector QStatorPu is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:20:3-20:98:writable] Warning: Connector switchOffSignal1 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:21:3-21:125:writable] Warning: Connector switchOffSignal2 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:22:3-22:125:writable] Warning: Connector switchOffSignal3 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:24:3-24:105:writable] Warning: Connector running is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Machines/BaseClasses/BaseGeneratorSimplified.mo:30:3-30:140:writable] Warning: Connector QGenPu is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Machines/BaseClasses/BaseGeneratorSimplified.mo:32:3-32:113:writable] Warning: Connector UPu is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Machines/SignalN/BaseClasses/BaseQStator.mo:19:3-19:123:writable] Warning: Connector QStatorPu is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:20:3-20:98:writable] Warning: Connector switchOffSignal1 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:21:3-21:125:writable] Warning: Connector switchOffSignal2 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:24:3-24:105:writable] Warning: Connector running is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Loads/BaseClasses/BaseLoad.mo:32:3-32:125:writable] Warning: Connector UPu is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:20:3-20:98:writable] Warning: Connector switchOffSignal1 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:21:3-21:125:writable] Warning: Connector switchOffSignal2 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:24:3-24:105:writable] Warning: Connector running is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Loads/BaseClasses/BaseLoad.mo:32:3-32:125:writable] Warning: Connector UPu is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:20:3-20:98:writable] Warning: Connector switchOffSignal1 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:21:3-21:125:writable] Warning: Connector switchOffSignal2 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:24:3-24:105:writable] Warning: Connector running is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Loads/BaseClasses/BaseLoad.mo:32:3-32:125:writable] Warning: Connector UPu is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:20:3-20:98:writable] Warning: Connector switchOffSignal1 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:21:3-21:125:writable] Warning: Connector switchOffSignal2 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:24:3-24:105:writable] Warning: Connector running is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Loads/BaseClasses/BaseLoad.mo:32:3-32:125:writable] Warning: Connector UPu is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:20:3-20:98:writable] Warning: Connector switchOffSignal1 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:21:3-21:125:writable] Warning: Connector switchOffSignal2 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:24:3-24:105:writable] Warning: Connector running is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Loads/BaseClasses/BaseLoad.mo:32:3-32:125:writable] Warning: Connector UPu is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:20:3-20:98:writable] Warning: Connector switchOffSignal1 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:21:3-21:125:writable] Warning: Connector switchOffSignal2 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:24:3-24:105:writable] Warning: Connector running is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Loads/BaseClasses/BaseLoad.mo:32:3-32:125:writable] Warning: Connector UPu is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:20:3-20:98:writable] Warning: Connector switchOffSignal1 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:21:3-21:125:writable] Warning: Connector switchOffSignal2 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:24:3-24:105:writable] Warning: Connector running is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Loads/BaseClasses/BaseLoad.mo:32:3-32:125:writable] Warning: Connector UPu is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:20:3-20:98:writable] Warning: Connector switchOffSignal1 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:21:3-21:125:writable] Warning: Connector switchOffSignal2 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:24:3-24:105:writable] Warning: Connector running is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Loads/BaseClasses/BaseLoad.mo:32:3-32:125:writable] Warning: Connector UPu is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:20:3-20:98:writable] Warning: Connector switchOffSignal1 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:21:3-21:125:writable] Warning: Connector switchOffSignal2 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:24:3-24:105:writable] Warning: Connector running is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Loads/BaseClasses/BaseLoad.mo:32:3-32:125:writable] Warning: Connector UPu is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:20:3-20:98:writable] Warning: Connector switchOffSignal1 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:21:3-21:125:writable] Warning: Connector switchOffSignal2 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:24:3-24:105:writable] Warning: Connector running is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Loads/BaseClasses/BaseLoad.mo:32:3-32:125:writable] Warning: Connector UPu is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:20:3-20:98:writable] Warning: Connector switchOffSignal1 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:21:3-21:125:writable] Warning: Connector switchOffSignal2 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:24:3-24:105:writable] Warning: Connector running is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Loads/BaseClasses/BaseLoad.mo:32:3-32:125:writable] Warning: Connector UPu is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:20:3-20:98:writable] Warning: Connector switchOffSignal1 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:21:3-21:125:writable] Warning: Connector switchOffSignal2 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:24:3-24:105:writable] Warning: Connector running is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:20:3-20:98:writable] Warning: Connector switchOffSignal1 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:21:3-21:125:writable] Warning: Connector switchOffSignal2 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:24:3-24:105:writable] Warning: Connector running is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:20:3-20:98:writable] Warning: Connector switchOffSignal1 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:21:3-21:125:writable] Warning: Connector switchOffSignal2 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:24:3-24:105:writable] Warning: Connector running is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:20:3-20:98:writable] Warning: Connector switchOffSignal1 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:21:3-21:125:writable] Warning: Connector switchOffSignal2 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:24:3-24:105:writable] Warning: Connector running is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:20:3-20:98:writable] Warning: Connector switchOffSignal1 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:21:3-21:125:writable] Warning: Connector switchOffSignal2 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:24:3-24:105:writable] Warning: Connector running is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:20:3-20:98:writable] Warning: Connector switchOffSignal1 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:21:3-21:125:writable] Warning: Connector switchOffSignal2 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:24:3-24:105:writable] Warning: Connector running is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:20:3-20:98:writable] Warning: Connector switchOffSignal1 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:21:3-21:125:writable] Warning: Connector switchOffSignal2 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:24:3-24:105:writable] Warning: Connector running is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:20:3-20:98:writable] Warning: Connector switchOffSignal1 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:21:3-21:125:writable] Warning: Connector switchOffSignal2 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:24:3-24:105:writable] Warning: Connector running is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:20:3-20:98:writable] Warning: Connector switchOffSignal1 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:21:3-21:125:writable] Warning: Connector switchOffSignal2 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:24:3-24:105:writable] Warning: Connector running is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:20:3-20:98:writable] Warning: Connector switchOffSignal1 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:21:3-21:125:writable] Warning: Connector switchOffSignal2 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:24:3-24:105:writable] Warning: Connector running is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:20:3-20:98:writable] Warning: Connector switchOffSignal1 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:21:3-21:125:writable] Warning: Connector switchOffSignal2 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:24:3-24:105:writable] Warning: Connector running is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:20:3-20:98:writable] Warning: Connector switchOffSignal1 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:21:3-21:125:writable] Warning: Connector switchOffSignal2 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:24:3-24:105:writable] Warning: Connector running is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:20:3-20:98:writable] Warning: Connector switchOffSignal1 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:21:3-21:125:writable] Warning: Connector switchOffSignal2 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:24:3-24:105:writable] Warning: Connector running is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:20:3-20:98:writable] Warning: Connector switchOffSignal1 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:21:3-21:125:writable] Warning: Connector switchOffSignal2 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:24:3-24:105:writable] Warning: Connector running is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:20:3-20:98:writable] Warning: Connector switchOffSignal1 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:21:3-21:125:writable] Warning: Connector switchOffSignal2 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:24:3-24:105:writable] Warning: Connector running is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:20:3-20:98:writable] Warning: Connector switchOffSignal1 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:21:3-21:125:writable] Warning: Connector switchOffSignal2 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:24:3-24:105:writable] Warning: Connector running is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:20:3-20:98:writable] Warning: Connector switchOffSignal1 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:21:3-21:125:writable] Warning: Connector switchOffSignal2 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:24:3-24:105:writable] Warning: Connector running is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:20:3-20:98:writable] Warning: Connector switchOffSignal1 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:21:3-21:125:writable] Warning: Connector switchOffSignal2 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:24:3-24:105:writable] Warning: Connector running is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:20:3-20:98:writable] Warning: Connector switchOffSignal1 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:21:3-21:125:writable] Warning: Connector switchOffSignal2 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:24:3-24:105:writable] Warning: Connector running is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:20:3-20:98:writable] Warning: Connector switchOffSignal1 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:21:3-21:125:writable] Warning: Connector switchOffSignal2 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:24:3-24:105:writable] Warning: Connector running is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:20:3-20:98:writable] Warning: Connector switchOffSignal1 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:21:3-21:125:writable] Warning: Connector switchOffSignal2 is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Basics/SwitchOff/SwitchOffLogic.mo:24:3-24:105:writable] Warning: Connector running is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Current/CurrentLimitAutomaton.mo:28:3-28:137:writable] Warning: Connector AutomatonExists is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Current/CurrentLimitAutomaton.mo:29:3-29:87:writable] Warning: Connector IMonitored is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Current/CurrentLimitAutomaton.mo:32:3-32:177:writable] Warning: Connector order is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Current/CurrentLimitAutomaton.mo:28:3-28:137:writable] Warning: Connector AutomatonExists is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Current/CurrentLimitAutomaton.mo:29:3-29:87:writable] Warning: Connector IMonitored is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Current/CurrentLimitAutomaton.mo:32:3-32:177:writable] Warning: Connector order is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Current/CurrentLimitAutomaton.mo:28:3-28:137:writable] Warning: Connector AutomatonExists is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Current/CurrentLimitAutomaton.mo:29:3-29:87:writable] Warning: Connector IMonitored is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Current/CurrentLimitAutomaton.mo:32:3-32:177:writable] Warning: Connector order is not balanced: The number of potential variables (1) is not equal to the number of flow variables (0). Notification: Performance of NFTyping.typeComponents: time 0.003628/0.1927, allocations: 1.002 MB / 0.5897 GB, free: 5.652 MB / 0.4981 GB Notification: Performance of NFTyping.typeBindings: time 0.00534/0.198, allocations: 1.191 MB / 0.5908 GB, free: 4.453 MB / 0.4981 GB [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Machines/SignalN/GeneratorPV.mo:27:3-48:11:writable] Warning: In relation Gen1.UPu == Gen1.URefPu, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Machines/BaseClasses/BaseGeneratorSimplified.mo:40:5-44:11:writable] Warning: In relation Gen1.terminal.V.re == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Machines/BaseClasses/BaseGeneratorSimplified.mo:40:5-44:11:writable] Warning: In relation Gen1.terminal.V.im == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Machines/SignalN/GeneratorPV.mo:27:3-48:11:writable] Warning: In relation Gen2.UPu == Gen2.URefPu, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Machines/BaseClasses/BaseGeneratorSimplified.mo:40:5-44:11:writable] Warning: In relation Gen2.terminal.V.re == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Machines/BaseClasses/BaseGeneratorSimplified.mo:40:5-44:11:writable] Warning: In relation Gen2.terminal.V.im == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Machines/SignalN/GeneratorPV.mo:27:3-48:11:writable] Warning: In relation Gen3.UPu == Gen3.URefPu, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Machines/BaseClasses/BaseGeneratorSimplified.mo:40:5-44:11:writable] Warning: In relation Gen3.terminal.V.re == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Machines/BaseClasses/BaseGeneratorSimplified.mo:40:5-44:11:writable] Warning: In relation Gen3.terminal.V.im == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Machines/SignalN/GeneratorPV.mo:27:3-48:11:writable] Warning: In relation Gen6.UPu == Gen6.URefPu, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Machines/BaseClasses/BaseGeneratorSimplified.mo:40:5-44:11:writable] Warning: In relation Gen6.terminal.V.re == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Machines/BaseClasses/BaseGeneratorSimplified.mo:40:5-44:11:writable] Warning: In relation Gen6.terminal.V.im == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Machines/SignalN/GeneratorPV.mo:27:3-48:11:writable] Warning: In relation Gen8.UPu == Gen8.URefPu, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Machines/BaseClasses/BaseGeneratorSimplified.mo:40:5-44:11:writable] Warning: In relation Gen8.terminal.V.re == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Machines/BaseClasses/BaseGeneratorSimplified.mo:40:5-44:11:writable] Warning: In relation Gen8.terminal.V.im == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Loads/LoadAlphaBetaRestorative.mo:31:5-39:11:writable] Warning: In relation Load2.terminal.V.re == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Loads/LoadAlphaBetaRestorative.mo:31:5-39:11:writable] Warning: In relation Load2.terminal.V.im == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Loads/LoadAlphaBetaRestorative.mo:31:5-39:11:writable] Warning: In relation Load3.terminal.V.re == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Loads/LoadAlphaBetaRestorative.mo:31:5-39:11:writable] Warning: In relation Load3.terminal.V.im == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Loads/LoadAlphaBetaRestorative.mo:31:5-39:11:writable] Warning: In relation Load4.terminal.V.re == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Loads/LoadAlphaBetaRestorative.mo:31:5-39:11:writable] Warning: In relation Load4.terminal.V.im == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Loads/LoadAlphaBetaRestorative.mo:31:5-39:11:writable] Warning: In relation Load5.terminal.V.re == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Loads/LoadAlphaBetaRestorative.mo:31:5-39:11:writable] Warning: In relation Load5.terminal.V.im == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Loads/LoadAlphaBetaRestorative.mo:31:5-39:11:writable] Warning: In relation Load6.terminal.V.re == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Loads/LoadAlphaBetaRestorative.mo:31:5-39:11:writable] Warning: In relation Load6.terminal.V.im == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Loads/LoadAlphaBetaRestorative.mo:31:5-39:11:writable] Warning: In relation Load9.terminal.V.re == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Loads/LoadAlphaBetaRestorative.mo:31:5-39:11:writable] Warning: In relation Load9.terminal.V.im == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Loads/LoadAlphaBetaRestorative.mo:31:5-39:11:writable] Warning: In relation Load10.terminal.V.re == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Loads/LoadAlphaBetaRestorative.mo:31:5-39:11:writable] Warning: In relation Load10.terminal.V.im == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Loads/LoadAlphaBetaRestorative.mo:31:5-39:11:writable] Warning: In relation Load11.terminal.V.re == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Loads/LoadAlphaBetaRestorative.mo:31:5-39:11:writable] Warning: In relation Load11.terminal.V.im == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Loads/LoadAlphaBetaRestorative.mo:31:5-39:11:writable] Warning: In relation Load12.terminal.V.re == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Loads/LoadAlphaBetaRestorative.mo:31:5-39:11:writable] Warning: In relation Load12.terminal.V.im == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Loads/LoadAlphaBetaRestorative.mo:31:5-39:11:writable] Warning: In relation Load13.terminal.V.re == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Loads/LoadAlphaBetaRestorative.mo:31:5-39:11:writable] Warning: In relation Load13.terminal.V.im == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Loads/LoadAlphaBetaRestorative.mo:31:5-39:11:writable] Warning: In relation Load14.terminal.V.re == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Loads/LoadAlphaBetaRestorative.mo:31:5-39:11:writable] Warning: In relation Load14.terminal.V.im == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Buses/Bus.mo:29:3-33:9:writable] Warning: In relation Bus1.terminal.V.re == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Buses/Bus.mo:29:3-33:9:writable] Warning: In relation Bus1.terminal.V.im == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Buses/Bus.mo:29:3-33:9:writable] Warning: In relation Bus2.terminal.V.re == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Buses/Bus.mo:29:3-33:9:writable] Warning: In relation Bus2.terminal.V.im == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Buses/Bus.mo:29:3-33:9:writable] Warning: In relation Bus3.terminal.V.re == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Buses/Bus.mo:29:3-33:9:writable] Warning: In relation Bus3.terminal.V.im == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Buses/Bus.mo:29:3-33:9:writable] Warning: In relation Bus4.terminal.V.re == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Buses/Bus.mo:29:3-33:9:writable] Warning: In relation Bus4.terminal.V.im == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Buses/Bus.mo:29:3-33:9:writable] Warning: In relation Bus5.terminal.V.re == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Buses/Bus.mo:29:3-33:9:writable] Warning: In relation Bus5.terminal.V.im == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Buses/Bus.mo:29:3-33:9:writable] Warning: In relation Bus6.terminal.V.re == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Buses/Bus.mo:29:3-33:9:writable] Warning: In relation Bus6.terminal.V.im == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Buses/Bus.mo:29:3-33:9:writable] Warning: In relation Bus7.terminal.V.re == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Buses/Bus.mo:29:3-33:9:writable] Warning: In relation Bus7.terminal.V.im == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Buses/Bus.mo:29:3-33:9:writable] Warning: In relation Bus8.terminal.V.re == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Buses/Bus.mo:29:3-33:9:writable] Warning: In relation Bus8.terminal.V.im == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Buses/Bus.mo:29:3-33:9:writable] Warning: In relation Bus9.terminal.V.re == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Buses/Bus.mo:29:3-33:9:writable] Warning: In relation Bus9.terminal.V.im == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Buses/Bus.mo:29:3-33:9:writable] Warning: In relation Bus10.terminal.V.re == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Buses/Bus.mo:29:3-33:9:writable] Warning: In relation Bus10.terminal.V.im == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Buses/Bus.mo:29:3-33:9:writable] Warning: In relation Bus11.terminal.V.re == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Buses/Bus.mo:29:3-33:9:writable] Warning: In relation Bus11.terminal.V.im == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Buses/Bus.mo:29:3-33:9:writable] Warning: In relation Bus12.terminal.V.re == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Buses/Bus.mo:29:3-33:9:writable] Warning: In relation Bus12.terminal.V.im == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Buses/Bus.mo:29:3-33:9:writable] Warning: In relation Bus13.terminal.V.re == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Buses/Bus.mo:29:3-33:9:writable] Warning: In relation Bus13.terminal.V.im == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Buses/Bus.mo:29:3-33:9:writable] Warning: In relation Bus14.terminal.V.re == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Buses/Bus.mo:29:3-33:9:writable] Warning: In relation Bus14.terminal.V.im == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Transformers/TransformersFixedTap/TransformerFixedRatio.mo:61:5-65:11:writable] Warning: In relation Tfo1.terminal1.V.re == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Transformers/TransformersFixedTap/TransformerFixedRatio.mo:61:5-65:11:writable] Warning: In relation Tfo1.terminal1.V.im == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Transformers/TransformersFixedTap/TransformerFixedRatio.mo:66:5-70:11:writable] Warning: In relation Tfo1.terminal2.V.re == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Transformers/TransformersFixedTap/TransformerFixedRatio.mo:66:5-70:11:writable] Warning: In relation Tfo1.terminal2.V.im == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Transformers/TransformersFixedTap/TransformerFixedRatio.mo:61:5-65:11:writable] Warning: In relation Tfo2.terminal1.V.re == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Transformers/TransformersFixedTap/TransformerFixedRatio.mo:61:5-65:11:writable] Warning: In relation Tfo2.terminal1.V.im == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Transformers/TransformersFixedTap/TransformerFixedRatio.mo:66:5-70:11:writable] Warning: In relation Tfo2.terminal2.V.re == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Transformers/TransformersFixedTap/TransformerFixedRatio.mo:66:5-70:11:writable] Warning: In relation Tfo2.terminal2.V.im == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Transformers/TransformersFixedTap/TransformerFixedRatio.mo:61:5-65:11:writable] Warning: In relation Tfo3.terminal1.V.re == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Transformers/TransformersFixedTap/TransformerFixedRatio.mo:61:5-65:11:writable] Warning: In relation Tfo3.terminal1.V.im == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Transformers/TransformersFixedTap/TransformerFixedRatio.mo:66:5-70:11:writable] Warning: In relation Tfo3.terminal2.V.re == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Transformers/TransformersFixedTap/TransformerFixedRatio.mo:66:5-70:11:writable] Warning: In relation Tfo3.terminal2.V.im == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Shunts/ShuntB.mo:35:3-39:9:writable] Warning: In relation Bank9.terminal.V.re == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Shunts/ShuntB.mo:35:3-39:9:writable] Warning: In relation Bank9.terminal.V.im == 0.0, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Current/CurrentLimitAutomaton.mo:39:3-47:11:writable] Warning: In relation pre(CLAB1B2.tThresholdReached) <> Modelica.Constants.inf, <> on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Current/CurrentLimitAutomaton.mo:49:3-51:11:writable] Warning: In relation CLAB1B2.tThresholdReached <> Modelica.Constants.inf, <> on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Current/CurrentLimitAutomaton.mo:49:3-51:11:writable] Warning: In relation CLAB1B2.tOrder == Modelica.Constants.inf, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Current/CurrentLimitAutomaton.mo:39:3-47:11:writable] Warning: In relation pre(CLAB2B5.tThresholdReached) <> Modelica.Constants.inf, <> on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Current/CurrentLimitAutomaton.mo:49:3-51:11:writable] Warning: In relation CLAB2B5.tThresholdReached <> Modelica.Constants.inf, <> on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Current/CurrentLimitAutomaton.mo:49:3-51:11:writable] Warning: In relation CLAB2B5.tOrder == Modelica.Constants.inf, == on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Current/CurrentLimitAutomaton.mo:39:3-47:11:writable] Warning: In relation pre(CLAB1B5.tThresholdReached) <> Modelica.Constants.inf, <> on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Current/CurrentLimitAutomaton.mo:49:3-51:11:writable] Warning: In relation CLAB1B5.tThresholdReached <> Modelica.Constants.inf, <> on Real numbers is only allowed inside functions. [/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Electrical/Controls/Current/CurrentLimitAutomaton.mo:49:3-51:11:writable] Warning: In relation CLAB1B5.tOrder == Modelica.Constants.inf, == on Real numbers is only allowed inside functions. Notification: Performance of NFTyping.typeClassSections: time 0.009518/0.2075, allocations: 3.269 MB / 0.594 GB, free: 1.199 MB / 0.4981 GB Notification: Performance of NFFlatten.flatten: time 0.01011/0.2176, allocations: 6.062 MB / 0.6 GB, free: 11.12 MB / 0.5137 GB Notification: Performance of NFFlatten.resolveConnections: time 0.001771/0.2194, allocations: 0.7719 MB / 0.6007 GB, free: 10.3 MB / 0.5137 GB Notification: Performance of NFEvalConstants.evaluate: time 0.003799/0.2232, allocations: 2.453 MB / 0.6031 GB, free: 7.836 MB / 0.5137 GB Notification: Performance of NFSimplifyModel.simplify: time 0.00429/0.2275, allocations: 2.422 MB / 0.6055 GB, free: 5.402 MB / 0.5137 GB Notification: Performance of NFPackage.collectConstants: time 0.001752/0.2292, allocations: 0.5273 MB / 0.606 GB, free: 4.875 MB / 0.5137 GB Notification: Performance of NFFlatten.collectFunctions: time 0.002127/0.2314, allocations: 0.7498 MB / 0.6067 GB, free: 4.125 MB / 0.5137 GB Notification: Performance of NFScalarize.scalarize: time 0.002013/0.2334, allocations: 1.347 MB / 0.608 GB, free: 2.773 MB / 0.5137 GB Notification: Performance of NFVerifyModel.verify: time 0.003097/0.2365, allocations: 2.076 MB / 0.6101 GB, free: 0.6875 MB / 0.5137 GB Notification: Performance of NFConvertDAE.convert: time 0.009053/0.2455, allocations: 6.165 MB / 0.6161 GB, free: 10.5 MB / 0.5294 GB Notification: Performance of FrontEnd - DAE generated: time 5.661e-06/0.2455, allocations: 4 kB / 0.6161 GB, free: 10.5 MB / 0.5294 GB Notification: Performance of FrontEnd: time 2.044e-06/0.2455, allocations: 0 / 0.6161 GB, free: 10.5 MB / 0.5294 GB Notification: Performance of Transformations before backend: time 0.0001961/0.2457, allocations: 7.875 kB / 0.6161 GB, free: 10.49 MB / 0.5294 GB Notification: Model statistics after passing the front-end and creating the data structures used by the back-end: * Number of equations: 817 * Number of variables: 817 Notification: Performance of Generate backend data structure: time 0.03544/0.2812, allocations: 9.716 MB / 0.6256 GB, free: 0.5234 MB / 0.5294 GB Notification: Performance of prepare preOptimizeDAE: time 4.698e-05/0.2812, allocations: 8.031 kB / 0.6256 GB, free: 0.5156 MB / 0.5294 GB Notification: Performance of preOpt normalInlineFunction (simulation): time 0.02214/0.3034, allocations: 3.155 MB / 0.6287 GB, free: 13.36 MB / 0.545 GB Notification: Performance of preOpt evaluateParameters (simulation): time 0.00938/0.3128, allocations: 2.996 MB / 0.6316 GB, free: 10.3 MB / 0.545 GB Notification: Performance of preOpt simplifyIfEquations (simulation): time 0.004645/0.3174, allocations: 5.757 MB / 0.6372 GB, free: 3.285 MB / 0.545 GB Notification: Performance of preOpt expandDerOperator (simulation): time 0.001724/0.3191, allocations: 392.2 kB / 0.6376 GB, free: 2.902 MB / 0.545 GB Notification: Performance of preOpt clockPartitioning (simulation): time 0.01545/0.3346, allocations: 5.361 MB / 0.6428 GB, free: 13.5 MB / 0.5606 GB Notification: Performance of preOpt findStateOrder (simulation): time 0.0001033/0.3347, allocations: 0 / 0.6428 GB, free: 13.5 MB / 0.5606 GB Notification: Performance of preOpt replaceEdgeChange (simulation): time 0.001537/0.3362, allocations: 195.9 kB / 0.643 GB, free: 13.3 MB / 0.5606 GB Notification: Performance of preOpt inlineArrayEqn (simulation): time 8.517e-05/0.3363, allocations: 76 kB / 0.6431 GB, free: 13.23 MB / 0.5606 GB Notification: Performance of preOpt removeEqualRHS (simulation): time 0.012/0.3483, allocations: 4.375 MB / 0.6474 GB, free: 8.848 MB / 0.5606 GB Warning: The model contains alias variables with redundant start and/or conflicting nominal values. It is recommended to resolve the conflicts, because otherwise the system could be hard to solve. To print the conflicting alias sets and the chosen candidates please use -d=aliasConflicts. Notification: Performance of preOpt removeSimpleEquations (simulation): time 0.04484/0.3931, allocations: 16.14 MB / 0.6631 GB, free: 8.617 MB / 0.5762 GB Notification: Performance of preOpt comSubExp (simulation): time 0.009602/0.4027, allocations: 4.049 MB / 0.6671 GB, free: 4.57 MB / 0.5762 GB Notification: Performance of preOpt resolveLoops (simulation): time 0.006768/0.4095, allocations: 2.87 MB / 0.6699 GB, free: 1.699 MB / 0.5762 GB Notification: Performance of preOpt evalFunc (simulation): time 0.0007169/0.4102, allocations: 63.81 kB / 0.6699 GB, free: 1.637 MB / 0.5762 GB Notification: Performance of preOpt encapsulateWhenConditions (simulation): time 0.0119/0.4221, allocations: 5.464 MB / 0.6753 GB, free: 12.12 MB / 0.5919 GB Notification: Performance of pre-optimization done (n=679): time 1.357e-05/0.4221, allocations: 0 / 0.6753 GB, free: 12.12 MB / 0.5919 GB Notification: Performance of matching and sorting (n=679): time 0.3052/0.7273, allocations: 12.28 MB / 0.6873 GB, free: 107.4 MB / 0.5919 GB Notification: Performance of inlineWhenForInitialization (initialization): time 0.0002374/0.7276, allocations: 197 kB / 0.6875 GB, free: 107.3 MB / 0.5919 GB Notification: Performance of selectInitializationVariablesDAE (initialization): time 0.003443/0.731, allocations: 2.332 MB / 0.6897 GB, free: 107.1 MB / 0.5919 GB Notification: Performance of collectPreVariables (initialization): time 0.001378/0.7324, allocations: 247.1 kB / 0.69 GB, free: 107.1 MB / 0.5919 GB Notification: Performance of collectInitialEqns (initialization): time 0.001043/0.7334, allocations: 1.385 MB / 0.6913 GB, free: 107 MB / 0.5919 GB Notification: Performance of collectInitialBindings (initialization): time 0.00234/0.7358, allocations: 1.995 MB / 0.6933 GB, free: 106 MB / 0.5919 GB Notification: Performance of simplifyInitialFunctions (initialization): time 0.002027/0.7378, allocations: 1.064 MB / 0.6943 GB, free: 105.6 MB / 0.5919 GB Notification: Performance of setup shared object (initialization): time 3.709e-05/0.7378, allocations: 301.1 kB / 0.6946 GB, free: 105.3 MB / 0.5919 GB Notification: Performance of preBalanceInitialSystem (initialization): time 0.004775/0.7426, allocations: 2.757 MB / 0.6973 GB, free: 104.1 MB / 0.5919 GB Notification: Performance of partitionIndependentBlocks (initialization): time 0.005802/0.7484, allocations: 4.199 MB / 0.7014 GB, free: 101.3 MB / 0.5919 GB Notification: Performance of analyzeInitialSystem (initialization): time 0.03312/0.7815, allocations: 14.11 MB / 0.7152 GB, free: 94.38 MB / 0.5919 GB Notification: Performance of solveInitialSystemEqSystem (initialization): time 6.636e-05/0.7816, allocations: 11.47 kB / 0.7152 GB, free: 94.38 MB / 0.5919 GB Notification: Performance of matching and sorting (n=929) (initialization): time 0.04516/0.8268, allocations: 12.52 MB / 0.7274 GB, free: 89.7 MB / 0.5919 GB Notification: Performance of prepare postOptimizeDAE: time 5.423e-05/0.8268, allocations: 33.23 kB / 0.7274 GB, free: 89.7 MB / 0.5919 GB Notification: Performance of postOpt simplifyComplexFunction (initialization): time 5.404e-05/0.8269, allocations: 39.19 kB / 0.7275 GB, free: 89.7 MB / 0.5919 GB Notification: Performance of postOpt tearingSystem (initialization): time 0.01188/0.8388, allocations: 7.985 MB / 0.7353 GB, free: 84.11 MB / 0.5919 GB Notification: Performance of postOpt solveSimpleEquations (initialization): time 0.006841/0.8456, allocations: 0.8683 MB / 0.7361 GB, free: 83.32 MB / 0.5919 GB Notification: Performance of postOpt calculateStrongComponentJacobians (initialization): time 0.0126/0.8582, allocations: 5.911 MB / 0.7419 GB, free: 77.37 MB / 0.5919 GB Notification: Performance of postOpt simplifyAllExpressions (initialization): time 0.006289/0.8645, allocations: 0.6169 MB / 0.7425 GB, free: 76.82 MB / 0.5919 GB Notification: Performance of postOpt collapseArrayExpressions (initialization): time 0.001144/0.8656, allocations: 260 kB / 0.7427 GB, free: 76.57 MB / 0.5919 GB Warning: Assuming fixed start value for the following 118 variables: Gen1.limUQUp:DISCRETE(flow=false start = Gen1.limUQUp0 fixed = true ) \"Whether the maximum reactive power limits are reached or not (from generator voltage regulator)\" type: Boolean Gen1.limUQDown:DISCRETE(flow=false start = Gen1.limUQDown0 fixed = true ) \"Whether the minimum reactive power limits are reached or not (from generator voltage regulator)\" type: Boolean Gen2.limUQUp:DISCRETE(flow=false start = Gen2.limUQUp0 fixed = true ) \"Whether the maximum reactive power limits are reached or not (from generator voltage regulator)\" type: Boolean Gen2.limUQDown:DISCRETE(flow=false start = Gen2.limUQDown0 fixed = true ) \"Whether the minimum reactive power limits are reached or not (from generator voltage regulator)\" type: Boolean Gen3.limUQUp:DISCRETE(flow=false start = Gen3.limUQUp0 fixed = true ) \"Whether the maximum reactive power limits are reached or not (from generator voltage regulator)\" type: Boolean Gen3.limUQDown:DISCRETE(flow=false start = Gen3.limUQDown0 fixed = true ) \"Whether the minimum reactive power limits are reached or not (from generator voltage regulator)\" type: Boolean Gen6.limUQUp:DISCRETE(flow=false start = Gen6.limUQUp0 fixed = true ) \"Whether the maximum reactive power limits are reached or not (from generator voltage regulator)\" type: Boolean Gen6.limUQDown:DISCRETE(flow=false start = Gen6.limUQDown0 fixed = true ) \"Whether the minimum reactive power limits are reached or not (from generator voltage regulator)\" type: Boolean Gen8.limUQUp:DISCRETE(flow=false start = Gen8.limUQUp0 fixed = true ) \"Whether the maximum reactive power limits are reached or not (from generator voltage regulator)\" type: Boolean Gen8.limUQDown:DISCRETE(flow=false start = Gen8.limUQDown0 fixed = true ) \"Whether the minimum reactive power limits are reached or not (from generator voltage regulator)\" type: Boolean Load2.state:DISCRETE(min = Dynawo.Electrical.Constants.state.Open max = Dynawo.Electrical.Constants.state.Undefined start = Load2.State0 fixed = true ) \"Load connection state\" type: enumeration(Open, Closed, Closed1, Closed2, Closed3, Undefined) Load3.state:DISCRETE(min = Dynawo.Electrical.Constants.state.Open max = Dynawo.Electrical.Constants.state.Undefined start = Load3.State0 fixed = true ) \"Load connection state\" type: enumeration(Open, Closed, Closed1, Closed2, Closed3, Undefined) Load4.state:DISCRETE(min = Dynawo.Electrical.Constants.state.Open max = Dynawo.Electrical.Constants.state.Undefined start = Load4.State0 fixed = true ) \"Load connection state\" type: enumeration(Open, Closed, Closed1, Closed2, Closed3, Undefined) Load5.state:DISCRETE(min = Dynawo.Electrical.Constants.state.Open max = Dynawo.Electrical.Constants.state.Undefined start = Load5.State0 fixed = true ) \"Load connection state\" type: enumeration(Open, Closed, Closed1, Closed2, Closed3, Undefined) Load6.state:DISCRETE(min = Dynawo.Electrical.Constants.state.Open max = Dynawo.Electrical.Constants.state.Undefined start = Load6.State0 fixed = true ) \"Load connection state\" type: enumeration(Open, Closed, Closed1, Closed2, Closed3, Undefined) Load9.state:DISCRETE(min = Dynawo.Electrical.Constants.state.Open max = Dynawo.Electrical.Constants.state.Undefined start = Load9.State0 fixed = true ) \"Load connection state\" type: enumeration(Open, Closed, Closed1, Closed2, Closed3, Undefined) Load10.state:DISCRETE(min = Dynawo.Electrical.Constants.state.Open max = Dynawo.Electrical.Constants.state.Undefined start = Load10.State0 fixed = true ) \"Load connection state\" type: enumeration(Open, Closed, Closed1, Closed2, Closed3, Undefined) Load11.state:DISCRETE(min = Dynawo.Electrical.Constants.state.Open max = Dynawo.Electrical.Constants.state.Undefined start = Load11.State0 fixed = true ) \"Load connection state\" type: enumeration(Open, Closed, Closed1, Closed2, Closed3, Undefined) Load12.state:DISCRETE(min = Dynawo.Electrical.Constants.state.Open max = Dynawo.Electrical.Constants.state.Undefined start = Load12.State0 fixed = true ) \"Load connection state\" type: enumeration(Open, Closed, Closed1, Closed2, Closed3, Undefined) Load13.state:DISCRETE(min = Dynawo.Electrical.Constants.state.Open max = Dynawo.Electrical.Constants.state.Undefined start = Load13.State0 fixed = true ) \"Load connection state\" type: enumeration(Open, Closed, Closed1, Closed2, Closed3, Undefined) Load14.state:DISCRETE(min = Dynawo.Electrical.Constants.state.Open max = Dynawo.Electrical.Constants.state.Undefined start = Load14.State0 fixed = true ) \"Load connection state\" type: enumeration(Open, Closed, Closed1, Closed2, Closed3, Undefined) LineB10B11.state:DISCRETE(min = Dynawo.Electrical.Constants.state.Open max = Dynawo.Electrical.Constants.state.Undefined start = LineB10B11.State0 fixed = true ) \"Line connection state\" type: enumeration(Open, Closed, Closed1, Closed2, Closed3, Undefined) LineB12B13.state:DISCRETE(min = Dynawo.Electrical.Constants.state.Open max = Dynawo.Electrical.Constants.state.Undefined start = LineB12B13.State0 fixed = true ) \"Line connection state\" type: enumeration(Open, Closed, Closed1, Closed2, Closed3, Undefined) LineB13B14.state:DISCRETE(min = Dynawo.Electrical.Constants.state.Open max = Dynawo.Electrical.Constants.state.Undefined start = LineB13B14.State0 fixed = true ) \"Line connection state\" type: enumeration(Open, Closed, Closed1, Closed2, Closed3, Undefined) LineB1B2.state:DISCRETE(min = Dynawo.Electrical.Constants.state.Open max = Dynawo.Electrical.Constants.state.Undefined start = LineB1B2.State0 fixed = true ) \"Line connection state\" type: enumeration(Open, Closed, Closed1, Closed2, Closed3, Undefined) LineB1B5.state:DISCRETE(min = Dynawo.Electrical.Constants.state.Open max = Dynawo.Electrical.Constants.state.Undefined start = LineB1B5.State0 fixed = true ) \"Line connection state\" type: enumeration(Open, Closed, Closed1, Closed2, Closed3, Undefined) LineB2B3.state:DISCRETE(min = Dynawo.Electrical.Constants.state.Open max = Dynawo.Electrical.Constants.state.Undefined start = LineB2B3.State0 fixed = true ) \"Line connection state\" type: enumeration(Open, Closed, Closed1, Closed2, Closed3, Undefined) LineB2B4.state:DISCRETE(min = Dynawo.Electrical.Constants.state.Open max = Dynawo.Electrical.Constants.state.Undefined start = LineB2B4.State0 fixed = true ) \"Line connection state\" type: enumeration(Open, Closed, Closed1, Closed2, Closed3, Undefined) LineB2B5.state:DISCRETE(min = Dynawo.Electrical.Constants.state.Open max = Dynawo.Electrical.Constants.state.Undefined start = LineB2B5.State0 fixed = true ) \"Line connection state\" type: enumeration(Open, Closed, Closed1, Closed2, Closed3, Undefined) LineB3B4.state:DISCRETE(min = Dynawo.Electrical.Constants.state.Open max = Dynawo.Electrical.Constants.state.Undefined start = LineB3B4.State0 fixed = true ) \"Line connection state\" type: enumeration(Open, Closed, Closed1, Closed2, Closed3, Undefined) LineB4B5.state:DISCRETE(min = Dynawo.Electrical.Constants.state.Open max = Dynawo.Electrical.Constants.state.Undefined start = LineB4B5.State0 fixed = true ) \"Line connection state\" type: enumeration(Open, Closed, Closed1, Closed2, Closed3, Undefined) LineB6B11.state:DISCRETE(min = Dynawo.Electrical.Constants.state.Open max = Dynawo.Electrical.Constants.state.Undefined start = LineB6B11.State0 fixed = true ) \"Line connection state\" type: enumeration(Open, Closed, Closed1, Closed2, Closed3, Undefined) LineB6B12.state:DISCRETE(min = Dynawo.Electrical.Constants.state.Open max = Dynawo.Electrical.Constants.state.Undefined start = LineB6B12.State0 fixed = true ) \"Line connection state\" type: enumeration(Open, Closed, Closed1, Closed2, Closed3, Undefined) LineB6B13.state:DISCRETE(min = Dynawo.Electrical.Constants.state.Open max = Dynawo.Electrical.Constants.state.Undefined start = LineB6B13.State0 fixed = true ) \"Line connection state\" type: enumeration(Open, Closed, Closed1, Closed2, Closed3, Undefined) LineB7B8.state:DISCRETE(min = Dynawo.Electrical.Constants.state.Open max = Dynawo.Electrical.Constants.state.Undefined start = LineB7B8.State0 fixed = true ) \"Line connection state\" type: enumeration(Open, Closed, Closed1, Closed2, Closed3, Undefined) LineB7B9.state:DISCRETE(min = Dynawo.Electrical.Constants.state.Open max = Dynawo.Electrical.Constants.state.Undefined start = LineB7B9.State0 fixed = true ) \"Line connection state\" type: enumeration(Open, Closed, Closed1, Closed2, Closed3, Undefined) LineB9B10.state:DISCRETE(min = Dynawo.Electrical.Constants.state.Open max = Dynawo.Electrical.Constants.state.Undefined start = LineB9B10.State0 fixed = true ) \"Line connection state\" type: enumeration(Open, Closed, Closed1, Closed2, Closed3, Undefined) LineB9B14.state:DISCRETE(min = Dynawo.Electrical.Constants.state.Open max = Dynawo.Electrical.Constants.state.Undefined start = LineB9B14.State0 fixed = true ) \"Line connection state\" type: enumeration(Open, Closed, Closed1, Closed2, Closed3, Undefined) Tfo1.state:DISCRETE(min = Dynawo.Electrical.Constants.state.Open max = Dynawo.Electrical.Constants.state.Undefined start = Tfo1.State0 fixed = true ) \"Transformer connection state\" type: enumeration(Open, Closed, Closed1, Closed2, Closed3, Undefined) Tfo2.state:DISCRETE(min = Dynawo.Electrical.Constants.state.Open max = Dynawo.Electrical.Constants.state.Undefined start = Tfo2.State0 fixed = true ) \"Transformer connection state\" type: enumeration(Open, Closed, Closed1, Closed2, Closed3, Undefined) Tfo3.state:DISCRETE(min = Dynawo.Electrical.Constants.state.Open max = Dynawo.Electrical.Constants.state.Undefined start = Tfo3.State0 fixed = true ) \"Transformer connection state\" type: enumeration(Open, Closed, Closed1, Closed2, Closed3, Undefined) Bank9.state:DISCRETE(min = Dynawo.Electrical.Constants.state.Open max = Dynawo.Electrical.Constants.state.Undefined start = Bank9.State0 fixed = true ) \"Shunt connection state\" type: enumeration(Open, Closed, Closed1, Closed2, Closed3, Undefined) Gen8.state:DISCRETE(min = Dynawo.Electrical.Constants.state.Open max = Dynawo.Electrical.Constants.state.Undefined start = Gen8.State0 fixed = true ) \"Generator connection state\" type: enumeration(Open, Closed, Closed1, Closed2, Closed3, Undefined) Gen6.state:DISCRETE(min = Dynawo.Electrical.Constants.state.Open max = Dynawo.Electrical.Constants.state.Undefined start = Gen6.State0 fixed = true ) \"Generator connection state\" type: enumeration(Open, Closed, Closed1, Closed2, Closed3, Undefined) Gen3.state:DISCRETE(min = Dynawo.Electrical.Constants.state.Open max = Dynawo.Electrical.Constants.state.Undefined start = Gen3.State0 fixed = true ) \"Generator connection state\" type: enumeration(Open, Closed, Closed1, Closed2, Closed3, Undefined) Gen2.state:DISCRETE(min = Dynawo.Electrical.Constants.state.Open max = Dynawo.Electrical.Constants.state.Undefined start = Gen2.State0 fixed = true ) \"Generator connection state\" type: enumeration(Open, Closed, Closed1, Closed2, Closed3, Undefined) Gen1.state:DISCRETE(min = Dynawo.Electrical.Constants.state.Open max = Dynawo.Electrical.Constants.state.Undefined start = Gen1.State0 fixed = true ) \"Generator connection state\" type: enumeration(Open, Closed, Closed1, Closed2, Closed3, Undefined) Gen1.running.value:DISCRETE(flow=false start = Gen1.Running0 fixed = true ) type: Boolean Gen2.running.value:DISCRETE(flow=false start = Gen2.Running0 fixed = true ) type: Boolean Gen3.running.value:DISCRETE(flow=false start = Gen3.Running0 fixed = true ) type: Boolean Gen6.running.value:DISCRETE(flow=false start = Gen6.Running0 fixed = true ) type: Boolean Gen8.running.value:DISCRETE(flow=false start = Gen8.Running0 fixed = true ) type: Boolean ModelSignalN.thetaRef:VARIABLE(start = 0.0 unit = \"rad\" fixed = true ) \"Voltage angle reference\" type: Real Load2.running.value:DISCRETE(flow=false start = Load2.Running0 fixed = true ) type: Boolean Load2.UFilteredRawPu:VARIABLE(start = (Load2.u0Pu.re ^ 2.0 + Load2.u0Pu.im ^ 2.0) ^ 0.5 unit = \"1\" fixed = true protected = true ) \"Filtered voltage amplitude at terminal in pu (base UNom)\" type: Real Load3.running.value:DISCRETE(flow=false start = Load3.Running0 fixed = true ) type: Boolean Load3.UFilteredRawPu:VARIABLE(start = (Load3.u0Pu.re ^ 2.0 + Load3.u0Pu.im ^ 2.0) ^ 0.5 unit = \"1\" fixed = true protected = true ) \"Filtered voltage amplitude at terminal in pu (base UNom)\" type: Real Load4.running.value:DISCRETE(flow=false start = Load4.Running0 fixed = true ) type: Boolean Load4.UFilteredRawPu:VARIABLE(start = (Load4.u0Pu.re ^ 2.0 + Load4.u0Pu.im ^ 2.0) ^ 0.5 unit = \"1\" fixed = true protected = true ) \"Filtered voltage amplitude at terminal in pu (base UNom)\" type: Real Load5.running.value:DISCRETE(flow=false start = Load5.Running0 fixed = true ) type: Boolean Load5.UFilteredRawPu:VARIABLE(start = (Load5.u0Pu.re ^ 2.0 + Load5.u0Pu.im ^ 2.0) ^ 0.5 unit = \"1\" fixed = true protected = true ) \"Filtered voltage amplitude at terminal in pu (base UNom)\" type: Real Load6.running.value:DISCRETE(flow=false start = Load6.Running0 fixed = true ) type: Boolean Load6.UFilteredRawPu:VARIABLE(start = (Load6.u0Pu.re ^ 2.0 + Load6.u0Pu.im ^ 2.0) ^ 0.5 unit = \"1\" fixed = true protected = true ) \"Filtered voltage amplitude at terminal in pu (base UNom)\" type: Real Load9.running.value:DISCRETE(flow=false start = Load9.Running0 fixed = true ) type: Boolean Load9.UFilteredRawPu:VARIABLE(start = (Load9.u0Pu.re ^ 2.0 + Load9.u0Pu.im ^ 2.0) ^ 0.5 unit = \"1\" fixed = true protected = true ) \"Filtered voltage amplitude at terminal in pu (base UNom)\" type: Real Load10.running.value:DISCRETE(flow=false start = Load10.Running0 fixed = true ) type: Boolean Load10.UFilteredRawPu:VARIABLE(start = (Load10.u0Pu.re ^ 2.0 + Load10.u0Pu.im ^ 2.0) ^ 0.5 unit = \"1\" fixed = true protected = true ) \"Filtered voltage amplitude at terminal in pu (base UNom)\" type: Real Load11.running.value:DISCRETE(flow=false start = Load11.Running0 fixed = true ) type: Boolean Load11.UFilteredRawPu:VARIABLE(start = (Load11.u0Pu.re ^ 2.0 + Load11.u0Pu.im ^ 2.0) ^ 0.5 unit = \"1\" fixed = true protected = true ) \"Filtered voltage amplitude at terminal in pu (base UNom)\" type: Real Load12.running.value:DISCRETE(flow=false start = Load12.Running0 fixed = true ) type: Boolean Load12.UFilteredRawPu:VARIABLE(start = (Load12.u0Pu.re ^ 2.0 + Load12.u0Pu.im ^ 2.0) ^ 0.5 unit = \"1\" fixed = true protected = true ) \"Filtered voltage amplitude at terminal in pu (base UNom)\" type: Real Load13.running.value:DISCRETE(flow=false start = Load13.Running0 fixed = true ) type: Boolean Load13.UFilteredRawPu:VARIABLE(start = (Load13.u0Pu.re ^ 2.0 + Load13.u0Pu.im ^ 2.0) ^ 0.5 unit = \"1\" fixed = true protected = true ) \"Filtered voltage amplitude at terminal in pu (base UNom)\" type: Real Load14.running.value:DISCRETE(flow=false start = Load14.Running0 fixed = true ) type: Boolean Load14.UFilteredRawPu:VARIABLE(start = (Load14.u0Pu.re ^ 2.0 + Load14.u0Pu.im ^ 2.0) ^ 0.5 unit = \"1\" fixed = true protected = true ) \"Filtered voltage amplitude at terminal in pu (base UNom)\" type: Real LineB10B11.running.value:DISCRETE(flow=false start = LineB10B11.Running0 fixed = true ) type: Boolean LineB12B13.running.value:DISCRETE(flow=false start = LineB12B13.Running0 fixed = true ) type: Boolean LineB13B14.running.value:DISCRETE(flow=false start = LineB13B14.Running0 fixed = true ) type: Boolean LineB1B2.switchOffSignal2.value:DISCRETE(flow=false start = LineB1B2.SwitchOffSignal20 fixed = true ) type: Boolean LineB1B2.running.value:DISCRETE(flow=false start = LineB1B2.Running0 fixed = true ) type: Boolean LineB1B5.switchOffSignal2.value:DISCRETE(flow=false start = LineB1B5.SwitchOffSignal20 fixed = true ) type: Boolean LineB1B5.running.value:DISCRETE(flow=false start = LineB1B5.Running0 fixed = true ) type: Boolean LineB2B3.running.value:DISCRETE(flow=false start = LineB2B3.Running0 fixed = true ) type: Boolean LineB2B4.running.value:DISCRETE(flow=false start = LineB2B4.Running0 fixed = true ) type: Boolean LineB2B5.switchOffSignal2.value:DISCRETE(flow=false start = LineB2B5.SwitchOffSignal20 fixed = true ) type: Boolean LineB2B5.running.value:DISCRETE(flow=false start = LineB2B5.Running0 fixed = true ) type: Boolean LineB3B4.running.value:DISCRETE(flow=false start = LineB3B4.Running0 fixed = true ) type: Boolean LineB4B5.running.value:DISCRETE(flow=false start = LineB4B5.Running0 fixed = true ) type: Boolean LineB6B11.running.value:DISCRETE(flow=false start = LineB6B11.Running0 fixed = true ) type: Boolean LineB6B12.running.value:DISCRETE(flow=false start = LineB6B12.Running0 fixed = true ) type: Boolean LineB6B13.running.value:DISCRETE(flow=false start = LineB6B13.Running0 fixed = true ) type: Boolean LineB7B8.running.value:DISCRETE(flow=false start = LineB7B8.Running0 fixed = true ) type: Boolean LineB7B9.running.value:DISCRETE(flow=false start = LineB7B9.Running0 fixed = true ) type: Boolean LineB9B10.running.value:DISCRETE(flow=false start = LineB9B10.Running0 fixed = true ) type: Boolean LineB9B14.running.value:DISCRETE(flow=false start = LineB9B14.Running0 fixed = true ) type: Boolean Tfo1.running.value:DISCRETE(flow=false start = Tfo1.Running0 fixed = true ) type: Boolean Tfo2.running.value:DISCRETE(flow=false start = Tfo2.Running0 fixed = true ) type: Boolean Tfo3.running.value:DISCRETE(flow=false start = Tfo3.Running0 fixed = true ) type: Boolean Bank9.running.value:DISCRETE(flow=false start = Bank9.Running0 fixed = true ) type: Boolean CLAB1B2.tThresholdReached:DISCRETE(start = 1e60 unit = \"s\" fixed = true protected = true ) \"Time when IMonitored > IMax was first reached in s\" type: Real CLAB1B2.tOrder:DISCRETE(start = 1e60 unit = \"s\" fixed = true protected = true ) \"Last time the automaton emitted an order in s\" type: Real CLAB2B5.tThresholdReached:DISCRETE(start = 1e60 unit = \"s\" fixed = true protected = true ) \"Time when IMonitored > IMax was first reached in s\" type: Real CLAB2B5.tOrder:DISCRETE(start = 1e60 unit = \"s\" fixed = true protected = true ) \"Last time the automaton emitted an order in s\" type: Real CLAB1B5.tThresholdReached:DISCRETE(start = 1e60 unit = \"s\" fixed = true protected = true ) \"Time when IMonitored > IMax was first reached in s\" type: Real CLAB1B5.tOrder:DISCRETE(start = 1e60 unit = \"s\" fixed = true protected = true ) \"Last time the automaton emitted an order in s\" type: Real CLAB1B5.order.value:DISCRETE(flow=false fixed = true ) type: Integer CLAB2B5.order.value:DISCRETE(flow=false fixed = true ) type: Integer CLAB1B2.order.value:DISCRETE(flow=false fixed = true ) type: Integer Gen8.qStatus:DISCRETE(min = Gen8.QStatus.Standard max = Gen8.QStatus.GenerationMax start = Gen8.qStatus0 fixed = true protected = true ) \"Voltage regulation status: Standard, AbsorptionMax, GenerationMax\" type: enumeration(Standard, AbsorptionMax, GenerationMax) Gen8.pStatus:DISCRETE(min = Gen8.PStatus.Standard max = Gen8.PStatus.LimitPMax start = Gen8.PStatus.Standard fixed = true protected = true ) \"Active power / frequency regulation status: Standard, LimitPMin, LimitPMax\" type: enumeration(Standard, LimitPMin, LimitPMax) Gen6.qStatus:DISCRETE(min = Gen6.QStatus.Standard max = Gen6.QStatus.GenerationMax start = Gen6.qStatus0 fixed = true protected = true ) \"Voltage regulation status: Standard, AbsorptionMax, GenerationMax\" type: enumeration(Standard, AbsorptionMax, GenerationMax) Gen6.pStatus:DISCRETE(min = Gen6.PStatus.Standard max = Gen6.PStatus.LimitPMax start = Gen6.PStatus.Standard fixed = true protected = true ) \"Active power / frequency regulation status: Standard, LimitPMin, LimitPMax\" type: enumeration(Standard, LimitPMin, LimitPMax) Gen3.qStatus:DISCRETE(min = Gen3.QStatus.Standard max = Gen3.QStatus.GenerationMax start = Gen3.qStatus0 fixed = true protected = true ) \"Voltage regulation status: Standard, AbsorptionMax, GenerationMax\" type: enumeration(Standard, AbsorptionMax, GenerationMax) Gen3.pStatus:DISCRETE(min = Gen3.PStatus.Standard max = Gen3.PStatus.LimitPMax start = Gen3.PStatus.Standard fixed = true protected = true ) \"Active power / frequency regulation status: Standard, LimitPMin, LimitPMax\" type: enumeration(Standard, LimitPMin, LimitPMax) Gen2.qStatus:DISCRETE(min = Gen2.QStatus.Standard max = Gen2.QStatus.GenerationMax start = Gen2.qStatus0 fixed = true protected = true ) \"Voltage regulation status: Standard, AbsorptionMax, GenerationMax\" type: enumeration(Standard, AbsorptionMax, GenerationMax) Gen2.pStatus:DISCRETE(min = Gen2.PStatus.Standard max = Gen2.PStatus.LimitPMax start = Gen2.PStatus.Standard fixed = true protected = true ) \"Active power / frequency regulation status: Standard, LimitPMin, LimitPMax\" type: enumeration(Standard, LimitPMin, LimitPMax) Gen1.qStatus:DISCRETE(min = Gen1.QStatus.Standard max = Gen1.QStatus.GenerationMax start = Gen1.qStatus0 fixed = true protected = true ) \"Voltage regulation status: Standard, AbsorptionMax, GenerationMax\" type: enumeration(Standard, AbsorptionMax, GenerationMax) Gen1.pStatus:DISCRETE(min = Gen1.PStatus.Standard max = Gen1.PStatus.LimitPMax start = Gen1.PStatus.Standard fixed = true protected = true ) \"Active power / frequency regulation status: Standard, LimitPMin, LimitPMax\" type: enumeration(Standard, LimitPMin, LimitPMax) Notification: Model statistics after passing the back-end for initialization: * Number of independent subsystems: 178 * Number of states: 0 () * Number of discrete variables: 493 ($PRE.Gen1.limUQUp,Gen1.limUQUp,$PRE.Gen1.limUQDown,Gen1.limUQDown,$PRE.Gen2.limUQUp,Gen2.limUQUp,$PRE.Gen2.limUQDown,Gen2.limUQDown,$PRE.Gen3.limUQUp,Gen3.limUQUp,$PRE.Gen3.limUQDown,Gen3.limUQDown,$PRE.Gen6.limUQUp,Gen6.limUQUp,$PRE.Gen6.limUQDown,Gen6.limUQDown,$PRE.Gen8.limUQUp,Gen8.limUQUp,$PRE.Gen8.limUQDown,Gen8.limUQDown,$PRE.Load2.state,Load2.state,$PRE.Load3.state,Load3.state,$PRE.Load4.state,Load4.state,$PRE.Load5.state,Load5.state,$PRE.Load6.state,Load6.state,$PRE.Load9.state,Load9.state,$PRE.Load10.state,Load10.state,$PRE.Load11.state,Load11.state,$PRE.Load12.state,Load12.state,$PRE.Load13.state,Load13.state,$PRE.Load14.state,Load14.state,$PRE.LineB10B11.state,LineB10B11.state,$PRE.LineB12B13.state,LineB12B13.state,$PRE.LineB13B14.state,LineB13B14.state,$PRE.LineB1B2.state,LineB1B2.state,$PRE.LineB1B5.state,LineB1B5.state,$PRE.LineB2B3.state,LineB2B3.state,$PRE.LineB2B4.state,LineB2B4.state,$PRE.LineB2B5.state,LineB2B5.state,$PRE.LineB3B4.state,LineB3B4.state,$PRE.LineB4B5.state,LineB4B5.state,$PRE.LineB6B11.state,LineB6B11.state,$PRE.LineB6B12.state,LineB6B12.state,$PRE.LineB6B13.state,LineB6B13.state,$PRE.LineB7B8.state,LineB7B8.state,$PRE.LineB7B9.state,LineB7B9.state,$PRE.LineB9B10.state,LineB9B10.state,$PRE.LineB9B14.state,LineB9B14.state,$PRE.Tfo1.state,Tfo1.state,$PRE.Tfo2.state,Tfo2.state,$PRE.Tfo3.state,Tfo3.state,$PRE.Bank9.state,Bank9.state,$PRE.Gen8.state,Gen8.converter.u,Gen8.state,$PRE.Gen6.state,Gen6.converter.u,Gen6.state,$PRE.Gen3.state,Gen3.converter.u,Gen3.state,$PRE.Gen2.state,Gen2.converter.u,Gen2.state,$PRE.Gen1.state,Gen1.converter.u,Gen1.state,$PRE.Gen1.running.value,$PRE.Gen2.running.value,$PRE.Gen3.running.value,$PRE.Gen6.running.value,$PRE.Gen8.running.value,$PRE.Load2.running.value,$PRE.Load3.running.value,$PRE.Load4.running.value,$PRE.Load5.running.value,$PRE.Load6.running.value,$PRE.Load9.running.value,$PRE.Load10.running.value,$PRE.Load11.running.value,$PRE.Load12.running.value,$PRE.Load13.running.value,$PRE.Load14.running.value,$PRE.LineB10B11.running.value,$PRE.LineB12B13.running.value,$PRE.LineB13B14.running.value,$PRE.LineB1B2.switchOffSignal2.value,$PRE.LineB1B2.running.value,$PRE.LineB1B5.switchOffSignal2.value,$PRE.LineB1B5.running.value,$PRE.LineB2B3.running.value,$PRE.LineB2B4.running.value,$PRE.LineB2B5.switchOffSignal2.value,$PRE.LineB2B5.running.value,$PRE.LineB3B4.running.value,$PRE.LineB4B5.running.value,$PRE.LineB6B11.running.value,$PRE.LineB6B12.running.value,$PRE.LineB6B13.running.value,$PRE.LineB7B8.running.value,$PRE.LineB7B9.running.value,$PRE.LineB9B10.running.value,$PRE.LineB9B14.running.value,$PRE.Tfo1.running.value,$PRE.Tfo2.running.value,$PRE.Tfo3.running.value,$PRE.Bank9.running.value,$PRE.CLAB1B2.tThresholdReached,$PRE.CLAB1B2.tOrder,$PRE.CLAB2B5.tThresholdReached,$PRE.CLAB2B5.tOrder,$PRE.CLAB1B5.tThresholdReached,$PRE.CLAB1B5.tOrder,$PRE.CLAB1B5.order.value,$PRE.CLAB2B5.order.value,$PRE.CLAB1B2.order.value,$PRE.Gen8.qStatus,$PRE.Gen8.pStatus,$PRE.Gen6.qStatus,$PRE.Gen6.pStatus,$PRE.Gen3.qStatus,$PRE.Gen3.pStatus,$PRE.Gen2.qStatus,$PRE.Gen2.pStatus,$PRE.Gen1.qStatus,$PRE.Gen1.pStatus,CLAB1B5.tOrder,CLAB1B5.tThresholdReached,CLAB1B5.order.value,CLAB2B5.tOrder,CLAB2B5.tThresholdReached,CLAB2B5.order.value,CLAB1B2.tOrder,CLAB1B2.tThresholdReached,CLAB1B2.order.value,Bank9.running.value,Tfo3.running.value,Tfo2.running.value,Tfo1.running.value,LineB9B14.running.value,LineB9B10.running.value,LineB7B9.running.value,LineB7B8.running.value,LineB6B13.running.value,LineB6B12.running.value,LineB6B11.running.value,LineB4B5.running.value,LineB3B4.running.value,LineB2B5.running.value,LineB2B5.switchOffSignal2.value,LineB2B4.running.value,LineB2B3.running.value,LineB1B5.running.value,LineB1B5.switchOffSignal2.value,LineB1B2.running.value,LineB1B2.switchOffSignal2.value,LineB13B14.running.value,LineB12B13.running.value,LineB10B11.running.value,Load14.running.value,Load13.running.value,Load12.running.value,Load11.running.value,Load10.running.value,Load9.running.value,Load6.running.value,Load5.running.value,Load4.running.value,Load3.running.value,Load2.running.value,Gen8.blocker,Gen8.qStatus,Gen8.pStatus,Gen8.running.value,Gen6.blocker,Gen6.qStatus,Gen6.pStatus,Gen6.running.value,Gen3.blocker,Gen3.qStatus,Gen3.pStatus,Gen3.running.value,Gen2.blocker,Gen2.qStatus,Gen2.pStatus,Gen2.running.value,Gen1.blocker,Gen1.qStatus,Gen1.pStatus,Gen1.running.value,$whenCondition2,$whenCondition1,$whenCondition4,$whenCondition3,$whenCondition6,$whenCondition5,$whenCondition7,$whenCondition9,$whenCondition8,$whenCondition10,$whenCondition12,$whenCondition11,$whenCondition13,$whenCondition15,$whenCondition14,$whenCondition16,$whenCondition18,$whenCondition17,$whenCondition19,$whenCondition21,$whenCondition20,$whenCondition22,$whenCondition24,$whenCondition23,$whenCondition25,$whenCondition27,$whenCondition26,$whenCondition28,$whenCondition30,$whenCondition29,$whenCondition31,$whenCondition33,$whenCondition32,$whenCondition34,$whenCondition36,$whenCondition35,$whenCondition37,$whenCondition39,$whenCondition38,$whenCondition40,$whenCondition42,$whenCondition41,$whenCondition43,$whenCondition45,$whenCondition44,$whenCondition46,$whenCondition48,$whenCondition47,$whenCondition49,$whenCondition51,$whenCondition50,$whenCondition52,$whenCondition54,$whenCondition53,$whenCondition56,$whenCondition55,$whenCondition58,$whenCondition57,$whenCondition59,$whenCondition61,$whenCondition60,$whenCondition62,$whenCondition64,$whenCondition63,$whenCondition66,$whenCondition65,$whenCondition68,$whenCondition67,$whenCondition70,$whenCondition69,$whenCondition72,$whenCondition71,$whenCondition73,$whenCondition75,$whenCondition74,$whenCondition76,$whenCondition78,$whenCondition77,$whenCondition79,$whenCondition81,$whenCondition80,$whenCondition82,$whenCondition84,$whenCondition83,$whenCondition85,$whenCondition87,$whenCondition86,$whenCondition88,$whenCondition90,$whenCondition89,$whenCondition91,$whenCondition93,$whenCondition92,$whenCondition94,$whenCondition96,$whenCondition95,$whenCondition97,$whenCondition99,$whenCondition98,$whenCondition100,$whenCondition102,$whenCondition101,$whenCondition103,$whenCondition105,$whenCondition104,$whenCondition106,$whenCondition108,$whenCondition107,$whenCondition109,$whenCondition111,$whenCondition110,$whenCondition112,$whenCondition114,$whenCondition113,$whenCondition115,$whenCondition117,$whenCondition116,$whenCondition121,$whenCondition120,$whenCondition119,$whenCondition118,$whenCondition126,$whenCondition125,$whenCondition124,$whenCondition123,$whenCondition122,$whenCondition127,$whenCondition129,$whenCondition128,$whenCondition133,$whenCondition132,$whenCondition131,$whenCondition130,$whenCondition138,$whenCondition137,$whenCondition136,$whenCondition135,$whenCondition134,$whenCondition139,$whenCondition141,$whenCondition140,$whenCondition145,$whenCondition144,$whenCondition143,$whenCondition142,$whenCondition150,$whenCondition149,$whenCondition148,$whenCondition147,$whenCondition146,$whenCondition151,$whenCondition153,$whenCondition152,$whenCondition157,$whenCondition156,$whenCondition155,$whenCondition154,$whenCondition162,$whenCondition161,$whenCondition160,$whenCondition159,$whenCondition158,$whenCondition163,$whenCondition165,$whenCondition164,$whenCondition169,$whenCondition168,$whenCondition167,$whenCondition166,$whenCondition174,$whenCondition173,$whenCondition172,$whenCondition171,$whenCondition170,$whenCondition177,$whenCondition176,$whenCondition175,$whenCondition180,$whenCondition179,$whenCondition178,$whenCondition183,$whenCondition182,$whenCondition181,$whenCondition186,$whenCondition185,$whenCondition184,$whenCondition189,$whenCondition188,$whenCondition187,$whenCondition190,$whenCondition191,$whenCondition192,Bank9.switchOffSignal2.value,Bank9.switchOffSignal1.value,Tfo3.switchOffSignal2.value,Tfo3.switchOffSignal1.value,Tfo2.switchOffSignal2.value,Tfo2.switchOffSignal1.value,Tfo1.switchOffSignal2.value,Tfo1.switchOffSignal1.value,LineB9B14.switchOffSignal2.value,LineB9B14.switchOffSignal1.value,LineB9B10.switchOffSignal2.value,LineB9B10.switchOffSignal1.value,LineB7B9.switchOffSignal2.value,LineB7B9.switchOffSignal1.value,LineB7B8.switchOffSignal2.value,LineB7B8.switchOffSignal1.value,LineB6B13.switchOffSignal2.value,LineB6B13.switchOffSignal1.value,LineB6B12.switchOffSignal2.value,LineB6B12.switchOffSignal1.value,LineB6B11.switchOffSignal2.value,LineB6B11.switchOffSignal1.value,LineB4B5.switchOffSignal2.value,LineB4B5.switchOffSignal1.value,LineB3B4.switchOffSignal2.value,LineB3B4.switchOffSignal1.value,LineB2B5.switchOffSignal1.value,LineB2B4.switchOffSignal2.value,LineB2B4.switchOffSignal1.value,LineB2B3.switchOffSignal2.value,LineB2B3.switchOffSignal1.value,LineB1B2.switchOffSignal1.value,LineB1B5.switchOffSignal1.value,LineB13B14.switchOffSignal2.value,LineB13B14.switchOffSignal1.value,LineB12B13.switchOffSignal2.value,LineB12B13.switchOffSignal1.value,LineB10B11.switchOffSignal2.value,LineB10B11.switchOffSignal1.value,Load14.switchOffSignal2.value,Load14.switchOffSignal1.value,Load13.switchOffSignal2.value,Load13.switchOffSignal1.value,Load12.switchOffSignal2.value,Load12.switchOffSignal1.value,Load11.switchOffSignal2.value,Load11.switchOffSignal1.value,Load10.switchOffSignal2.value,Load10.switchOffSignal1.value,Load9.switchOffSignal2.value,Load9.switchOffSignal1.value,Load6.switchOffSignal2.value,Load6.switchOffSignal1.value,Load5.switchOffSignal2.value,Load5.switchOffSignal1.value,Load4.switchOffSignal2.value,Load4.switchOffSignal1.value,Load3.switchOffSignal2.value,Load3.switchOffSignal1.value,Load2.switchOffSignal2.value,Load2.switchOffSignal1.value,Gen8.switchOffSignal3.value,Gen8.switchOffSignal2.value,Gen8.switchOffSignal1.value,Gen6.switchOffSignal3.value,Gen6.switchOffSignal2.value,Gen6.switchOffSignal1.value,Gen3.switchOffSignal3.value,Gen3.switchOffSignal2.value,Gen3.switchOffSignal1.value,Gen2.switchOffSignal3.value,Gen2.switchOffSignal2.value,Gen2.switchOffSignal1.value,Gen1.switchOffSignal3.value,Gen1.switchOffSignal2.value,Gen1.switchOffSignal1.value,CLAB1B5.AutomatonExists.value,CLAB2B5.AutomatonExists.value,CLAB1B2.AutomatonExists.value) * Number of discrete states: 0 () * Number of clocked states: 0 () * Top-level inputs: 0 Notification: Strong component statistics for initialization (733): * Single equations (assignments): 732 * Array equations: 0 * Algorithm blocks: 0 * Record equations: 0 * When equations: 0 * If-equations: 0 * Equation systems (not torn): 0 * Torn equation systems: 1 * Mixed (continuous/discrete) equation systems: 0 Notification: Torn system details for strict tearing set: * Linear torn systems (#iteration vars, #inner vars, density): 0 systems * Non-linear torn systems (#iteration vars, #inner vars): 1 system {(126,71)} Notification: Performance of prepare postOptimizeDAE: time 0.0034/0.869, allocations: 1.644 MB / 0.7443 GB, free: 75.01 MB / 0.5919 GB Notification: Performance of postOpt lateInlineFunction (simulation): time 0.001292/0.8703, allocations: 0.5477 MB / 0.7449 GB, free: 74.46 MB / 0.5919 GB Notification: Performance of postOpt wrapFunctionCalls (simulation): time 0.01734/0.8877, allocations: 9.688 MB / 0.7543 GB, free: 64.69 MB / 0.5919 GB Notification: Performance of postOpt simplifysemiLinear (simulation): time 0.0001071/0.8878, allocations: 31.88 kB / 0.7544 GB, free: 64.66 MB / 0.5919 GB Notification: Performance of postOpt simplifyComplexFunction (simulation): time 1.28e-05/0.8878, allocations: 4 kB / 0.7544 GB, free: 64.66 MB / 0.5919 GB Notification: Performance of postOpt removeConstants (simulation): time 0.001133/0.8889, allocations: 0.4998 MB / 0.7549 GB, free: 64.21 MB / 0.5919 GB Notification: Performance of postOpt simplifyTimeIndepFuncCalls (simulation): time 0.001499/0.8904, allocations: 199.8 kB / 0.7551 GB, free: 64.01 MB / 0.5919 GB Notification: Performance of postOpt simplifyAllExpressions (simulation): time 0.005062/0.8955, allocations: 427.5 kB / 0.7555 GB, free: 63.59 MB / 0.5919 GB Notification: Performance of postOpt findZeroCrossings (simulation): time 0.002842/0.8983, allocations: 0.8708 MB / 0.7563 GB, free: 62.72 MB / 0.5919 GB Notification: Performance of postOpt createDAEmodeBDAE (simulation): time 0.02092/0.9192, allocations: 9.149 MB / 0.7652 GB, free: 53.63 MB / 0.5919 GB Notification: Performance of postOpt symbolicJacobianDAE (simulation): time 0.01718/0.9364, allocations: 10.63 MB / 0.7756 GB, free: 42.9 MB / 0.5919 GB Notification: Performance of postOpt setEvaluationStage (simulation): time 0.005242/0.9417, allocations: 2.881 MB / 0.7784 GB, free: 40 MB / 0.5919 GB Notification: Performance of sorting global known variables: time 0.001537/0.9432, allocations: 1.405 MB / 0.7798 GB, free: 38.6 MB / 0.5919 GB Notification: Performance of Backend: time 3e-07/0.9432, allocations: 4 kB / 0.7798 GB, free: 38.59 MB / 0.5919 GB Notification: Performance of simCode: created initialization part: time 0.01719/0.9604, allocations: 5.442 MB / 0.7851 GB, free: 33.18 MB / 0.5919 GB Notification: Performance of SimCode: time 0.01415/0.9745, allocations: 10.03 MB / 0.7949 GB, free: 23.2 MB / 0.5919 GB Notification: Performance of Templates: time 0.1838/1.158, allocations: 115.5 MB / 0.9077 GB, free: 4.531 MB / 0.6856 GB " [Timeout remaining time 659] make -j1 -f Dynawo_dev_Dynawo.Examples.IEEE14.TestCases.IEEE14CLA.makefile [Timeout 660] make -j1 -f Dynawo_dev_Dynawo.Examples.IEEE14.TestCases.IEEE14CLA.makefile clang -Os -DOM_HAVE_PTHREADS -fPIC -falign-functions -mfpmath=sse -fno-dollars-in-identifiers -Wno-parentheses-equality "-I/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Resources/Include" -I"/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/c" -I"/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc" -I. -DOPENMODELICA_XML_FROM_FILE_AT_RUNTIME -DOMC_MODEL_PREFIX=Dynawo_dev_Dynawo_Examples_IEEE14_TestCases_IEEE14CLA -DOMC_NUM_MIXED_SYSTEMS=0 -DOMC_NUM_LINEAR_SYSTEMS=0 -DOMC_NUM_NONLINEAR_SYSTEMS=1 -DOMC_NDELAY_EXPRESSIONS=0 -DOMC_NVAR_STRING=0 -c -o Dynawo_dev_Dynawo.Examples.IEEE14.TestCases.IEEE14CLA.o Dynawo_dev_Dynawo.Examples.IEEE14.TestCases.IEEE14CLA.c clang -Os -DOM_HAVE_PTHREADS -fPIC -falign-functions -mfpmath=sse -fno-dollars-in-identifiers -Wno-parentheses-equality "-I/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Resources/Include" -I"/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/c" -I"/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc" -I. -DOPENMODELICA_XML_FROM_FILE_AT_RUNTIME -DOMC_MODEL_PREFIX=Dynawo_dev_Dynawo_Examples_IEEE14_TestCases_IEEE14CLA -DOMC_NUM_MIXED_SYSTEMS=0 -DOMC_NUM_LINEAR_SYSTEMS=0 -DOMC_NUM_NONLINEAR_SYSTEMS=1 -DOMC_NDELAY_EXPRESSIONS=0 -DOMC_NVAR_STRING=0 -c -o Dynawo_dev_Dynawo.Examples.IEEE14.TestCases.IEEE14CLA_functions.o Dynawo_dev_Dynawo.Examples.IEEE14.TestCases.IEEE14CLA_functions.c clang -Os -DOM_HAVE_PTHREADS -fPIC -falign-functions -mfpmath=sse -fno-dollars-in-identifiers -Wno-parentheses-equality "-I/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Resources/Include" -I"/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/c" -I"/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc" -I. -DOPENMODELICA_XML_FROM_FILE_AT_RUNTIME -DOMC_MODEL_PREFIX=Dynawo_dev_Dynawo_Examples_IEEE14_TestCases_IEEE14CLA -DOMC_NUM_MIXED_SYSTEMS=0 -DOMC_NUM_LINEAR_SYSTEMS=0 -DOMC_NUM_NONLINEAR_SYSTEMS=1 -DOMC_NDELAY_EXPRESSIONS=0 -DOMC_NVAR_STRING=0 -c -o Dynawo_dev_Dynawo.Examples.IEEE14.TestCases.IEEE14CLA_records.o Dynawo_dev_Dynawo.Examples.IEEE14.TestCases.IEEE14CLA_records.c clang -Os -DOM_HAVE_PTHREADS -fPIC -falign-functions -mfpmath=sse -fno-dollars-in-identifiers -Wno-parentheses-equality "-I/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Resources/Include" -I"/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/c" -I"/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc" -I. -DOPENMODELICA_XML_FROM_FILE_AT_RUNTIME -DOMC_MODEL_PREFIX=Dynawo_dev_Dynawo_Examples_IEEE14_TestCases_IEEE14CLA -DOMC_NUM_MIXED_SYSTEMS=0 -DOMC_NUM_LINEAR_SYSTEMS=0 -DOMC_NUM_NONLINEAR_SYSTEMS=1 -DOMC_NDELAY_EXPRESSIONS=0 -DOMC_NVAR_STRING=0 -c -o Dynawo_dev_Dynawo.Examples.IEEE14.TestCases.IEEE14CLA_01exo.o Dynawo_dev_Dynawo.Examples.IEEE14.TestCases.IEEE14CLA_01exo.c clang -Os -DOM_HAVE_PTHREADS -fPIC -falign-functions -mfpmath=sse -fno-dollars-in-identifiers -Wno-parentheses-equality "-I/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Resources/Include" -I"/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/c" -I"/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc" -I. -DOPENMODELICA_XML_FROM_FILE_AT_RUNTIME -DOMC_MODEL_PREFIX=Dynawo_dev_Dynawo_Examples_IEEE14_TestCases_IEEE14CLA -DOMC_NUM_MIXED_SYSTEMS=0 -DOMC_NUM_LINEAR_SYSTEMS=0 -DOMC_NUM_NONLINEAR_SYSTEMS=1 -DOMC_NDELAY_EXPRESSIONS=0 -DOMC_NVAR_STRING=0 -c -o Dynawo_dev_Dynawo.Examples.IEEE14.TestCases.IEEE14CLA_02nls.o Dynawo_dev_Dynawo.Examples.IEEE14.TestCases.IEEE14CLA_02nls.c clang -Os -DOM_HAVE_PTHREADS -fPIC -falign-functions -mfpmath=sse -fno-dollars-in-identifiers -Wno-parentheses-equality "-I/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Resources/Include" -I"/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/c" -I"/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc" -I. -DOPENMODELICA_XML_FROM_FILE_AT_RUNTIME -DOMC_MODEL_PREFIX=Dynawo_dev_Dynawo_Examples_IEEE14_TestCases_IEEE14CLA -DOMC_NUM_MIXED_SYSTEMS=0 -DOMC_NUM_LINEAR_SYSTEMS=0 -DOMC_NUM_NONLINEAR_SYSTEMS=1 -DOMC_NDELAY_EXPRESSIONS=0 -DOMC_NVAR_STRING=0 -c -o Dynawo_dev_Dynawo.Examples.IEEE14.TestCases.IEEE14CLA_03lsy.o Dynawo_dev_Dynawo.Examples.IEEE14.TestCases.IEEE14CLA_03lsy.c clang -Os -DOM_HAVE_PTHREADS -fPIC -falign-functions -mfpmath=sse -fno-dollars-in-identifiers -Wno-parentheses-equality "-I/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Resources/Include" -I"/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/c" -I"/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc" -I. -DOPENMODELICA_XML_FROM_FILE_AT_RUNTIME -DOMC_MODEL_PREFIX=Dynawo_dev_Dynawo_Examples_IEEE14_TestCases_IEEE14CLA -DOMC_NUM_MIXED_SYSTEMS=0 -DOMC_NUM_LINEAR_SYSTEMS=0 -DOMC_NUM_NONLINEAR_SYSTEMS=1 -DOMC_NDELAY_EXPRESSIONS=0 -DOMC_NVAR_STRING=0 -c -o Dynawo_dev_Dynawo.Examples.IEEE14.TestCases.IEEE14CLA_04set.o Dynawo_dev_Dynawo.Examples.IEEE14.TestCases.IEEE14CLA_04set.c clang -Os -DOM_HAVE_PTHREADS -fPIC -falign-functions -mfpmath=sse -fno-dollars-in-identifiers -Wno-parentheses-equality "-I/home/hudson/saved_omc/libraries/.openmodelica/libraries/Dynawo master/Resources/Include" -I"/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc/c" -I"/var/lib/jenkins1/ws/OpenModelicaLibraryTestingWork/OpenModelica/OMCompiler/build/bin/../include/omc" -I. -DOPENMODELICA_XML_FROM_FILE_AT_RUNTIME -DOMC_MODEL_PREFIX=Dynawo_dev_Dynawo_Examples_IEEE14_TestCases_IEEE14CLA -DOMC_NUM_MIXED_SYSTEMS=0 -DOMC_NUM_LINEAR_SYSTEMS=0 -DOMC_NUM_NONLINEAR_SYSTEMS=1 -DOMC_NDELAY_EXPRESSIONS=0 -DOMC_NVAR_STRING=0 -c -o Dynawo_dev_Dynawo.Examples.IEEE14.TestCases.IEEE14CLA_05evt.o Dynawo_dev_Dynawo.Examples.IEEE14.TestCases.IEEE14CLA_05evt.c Dynawo_dev_Dynawo.Examples.IEEE14.TestCases.IEEE14CLA_05evt.c:1418:19: error: use of undeclared identifier '_omcQ_24DER' tmp643 = LessZC(_omcQ_24DER._CLAB1B2._IMonitored._value, 0.0, tmp644, tmp645, data->simulationInfo->storedRelations[115]); ^ Dynawo_dev_Dynawo.Examples.IEEE14.TestCases.IEEE14CLA_05evt.c:1425:19: error: use of undeclared identifier '_omcQ_24DER' tmp646 = LessZC(_omcQ_24DER._CLAB2B5._IMonitored._value, 0.0, tmp647, tmp648, data->simulationInfo->storedRelations[116]); ^ Dynawo_dev_Dynawo.Examples.IEEE14.TestCases.IEEE14CLA_05evt.c:1432:19: error: use of undeclared identifier '_omcQ_24DER' tmp649 = LessZC(_omcQ_24DER._CLAB1B5._IMonitored._value, 0.0, tmp650, tmp651, data->simulationInfo->storedRelations[117]); ^ Dynawo_dev_Dynawo.Examples.IEEE14.TestCases.IEEE14CLA_05evt.c:2538:21: error: use of undeclared identifier '_omcQ_24DER' tmp898 = LessZC(_omcQ_24DER._CLAB1B2._IMonitored._value, 0.0, tmp899, tmp900, data->simulationInfo->storedRelations[115]); ^ Dynawo_dev_Dynawo.Examples.IEEE14.TestCases.IEEE14CLA_05evt.c:2545:21: error: use of undeclared identifier '_omcQ_24DER' tmp901 = LessZC(_omcQ_24DER._CLAB2B5._IMonitored._value, 0.0, tmp902, tmp903, data->simulationInfo->storedRelations[116]); ^ Dynawo_dev_Dynawo.Examples.IEEE14.TestCases.IEEE14CLA_05evt.c:2552:21: error: use of undeclared identifier '_omcQ_24DER' tmp904 = LessZC(_omcQ_24DER._CLAB1B5._IMonitored._value, 0.0, tmp905, tmp906, data->simulationInfo->storedRelations[117]); ^ Dynawo_dev_Dynawo.Examples.IEEE14.TestCases.IEEE14CLA_05evt.c:3017:53: error: use of undeclared identifier '_omcQ_24DER' data->simulationInfo->relations[start_index] = (_omcQ_24DER._CLAB1B2._IMonitored._value < 0.0); ^ Dynawo_dev_Dynawo.Examples.IEEE14.TestCases.IEEE14CLA_05evt.c:3021:53: error: use of undeclared identifier '_omcQ_24DER' data->simulationInfo->relations[start_index] = (_omcQ_24DER._CLAB2B5._IMonitored._value < 0.0); ^ Dynawo_dev_Dynawo.Examples.IEEE14.TestCases.IEEE14CLA_05evt.c:3025:53: error: use of undeclared identifier '_omcQ_24DER' data->simulationInfo->relations[start_index] = (_omcQ_24DER._CLAB1B5._IMonitored._value < 0.0); ^ 9 errors generated. make: *** [: Dynawo_dev_Dynawo.Examples.IEEE14.TestCases.IEEE14CLA_05evt.o] Error 1 [Calling os._exit(0), Time elapsed: 6.046344824018888] Failed to read output from testmodel.py, exit status != 0: 1.171740290010348 1.1874457250000001 0.938071959 Calling exit ...